各种视频插头插座接口介绍(引脚定义)

  • 格式:doc
  • 大小:140.50 KB
  • 文档页数:8

各种视频插头插座接口介绍(引脚定义)

SCART plug & connector: CENELEC (ité Européen de Normalisation Electrotechnique) EN 50 049-1 / IEC 933-1

Pin No. Signal Inter Conne-ction Pin No.

1 Audio right channel output (0.5 Vrms, < 1K ohms) 2

2 Audio right channel input (0.5 Vrms, > 10K ohms) 1

3 Audio left channel output (0.5 Vrms, < 1K ohms) 6

4 Audio ground 4

5 Blue signal ground 5

6 Audio left channel input (0.5 Vrms, > 10K ohms) 3

7 Blue signal I/O (0.7 Vp-p, 75 ohms) 7

8 Function switching I/O (L: < 2V, H: > 10V, 10K ohms) 8

9 Green signal ground 9

10 Intermunication data line No. 1 10

11 Green signal I/O (0.7 Vp-p, 75 ohms) 11

12 Intermunication data line No. 2 12

13 Red signal ground 13

14 Blanking signal ground 14

15 Red signal I/O (0.7 Vp-p, 75 ohms) 15

16 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75 ohms) 16

17 posite video signal ground 18

18 Blanking signal ground 17

19 posite video signal output (1 Vp-p, 75 ohms, sync: negative) 20

20 posite video signal input (1 Vp-p, 75 ohms, sync: negative) 19

21 Plug shield (mon ground) 21

此主题相关图片如下:

EIAJ RGB plug & connector: EIAJ TTC-003

Outlook of plug and connector including pin assignment are the same as SCART plug and connector

Pin No. Signal Inter Conne-ction Pin No.

1 Audio left channel input (0.40 mVrms, > 47K ohms) 1

2 Audio left channel output (0.40 mVrms, > 10K ohms) 2

3 Audio ground 3

4 Audio ground 4

5 Audio right channel input (0.40 mVrms, > 47K ohms) 6

6 Audio right channel output (0.40 mVrms, > 10K ohms) 5

7 Video ground 7

8 Video ground 8

9 CVBS input (1 Vp-p, 75 ohms, sync: negative) 10

10 CVBS output (1 Vp-p, 75 ohms, sync: negative) 9 11 AV control input 11

12 Ym input (switch for R, G & B signal to half tone level, L: < 0.4,

H: > 1.0, 75 ohms) 12

13 Red signal ground 13

14 Ground 14

15 Red signal I/O (0.7 Vp-p, 75 ohms) 15

16 Ys input (switch for R, G & B signal from/to internal and external,

L: < 0.4, H: > 1.0, 75 ohms) 16

17 Green signal ground 17

18 Blue signal ground 18

19 Green signal I/O (0.7 Vp-p, 75 ohms) 19

20 Blue signal I/O (0.7 Vp-p, 75 ohms) 20

21 Plug shield 21

S-connector: EIAJ CP-1211, IEC 84(s)80

Pin No. Signal

1 Luminance (Y) signal ground

2 Chrominance (C) signal ground

3 Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative)

4 Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms)

S1 and S2 connector

Pin No. S1 connector S2 connector

1 Luminance (Y) signal ground Luminance (Y) signal ground

2 Chrominance (C) signal ground Chrominance (C) signal ground

3 Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative) Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative)

4 Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms)

Squeeze control input:

+ 5V DC / >100KW Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms)

Squeeze control input:

+ 5V DC / >100KW

Letterbox control input:

+ 2.2V DC / >100KW

EIAJ D-connector D1/2/3/4/5: EIAJ RC-5237

Pin No. Signal

1 Y signal I/O (+700 mV & sync: +/-300 mV *1, 75 ohms)

2 Y_GND

3 PB (+/- 350 mV, 75 ohms)

4 PB_GND

5 PR (+/- 350 mV, 75 ohms)

6 PR_GND

7 Reserved line 1

8 Line 1 (0V: 525 lines, 2.2V: 750 lines, 5V: 1125 lines)

9 Line 2 (0V: 59.94i / 60i, 2.2V: -, 5V: 59.94p / 60p)

10 Reserved line 2

11 Line 3 (0V: 4:3, 2.2V: 4:3 letter box, 5V: 16:9)

12 Plug insert detect GND

13 Reserved line 3

14 Plug insert detect (output: 10K ohms, input: >100K ohms)

hooks Shell GND

*1: for 1125i and 750p. -300mV for 525p/525i, superimposed in Y signal

Note: Indication for video signal format (i: interlace, p: progressive) D1: 525i

D2: 525i, 525p

D3: 525i, 525p, 1125i

D4: 525i, 525p, 1125i, 750p

D5: 525i, 525p, 1125i, 750p, 1125p

VESA DFP connector: VESA (Video Electronics Standards Association) Digital Flat Panel (DFP) Standard

Pin No. Signal Name Signal

1 TX1+ TMDS positive differential output, channel 1

2 TX1- TMDS negative differential output, channel 1

3 SHLD1 Shield for TMDS channel 1

4 SHLDC Shield for TMDS clock

5 TXC+ TMDS positive differential output, reference clock

6 TXC- TMDS negative differential output, reference clock

7 GND Logic Ground

8 +5V Logic +5V DC Supply from the Host

9 No Connect No Connection

10 No Connect No Connection

11 TX2+ TMDS positive differential output, channel 2

12 TX2- TMDS negative differential output, channel 2

13 SHLD2 Shield for TMDS channel 2

14 SHLD0 Shield for TMDS channel 0

15 TX0+ TMDS positive differential output, channel 0

16 TX0- TMDS negative differential output, channel 0

17 No Connect No Connection

18 HPD Hot Plug Detection (+5V DC to Host)

19 DDC_DAT DDC2B Data