京瓷10.4寸高亮屏型号TCG104XGLPAPNN-AN40-详细参数

Smart displaysolutionsfor newworkspacesFUJITSU DisplaysA feast for your eyesStart here →Start exploring:Your go-to displays for a smart office environmentBack-to-back videoconferences, followed by intricate work on side-by-sides preadsheets? Fast typing in a multi-page document, then presenting toc olleagues over a remote link? Designing a graphic that needs utmost color fidelity, and next on the agenda is producing a video? In every smart, connected workplace, the display is the gateway to productive multitasking. And with morep eople than ever adopting flexible working, moving between homes and offices, it is vital to have the same excellent standards everywhere.When you choose a display from Fujitsu, you will never have to compromise. With display solutions for every user profile, from CAD and finance experts to mainstream office admin, and in sizes from 19 to 34 inches, ultrawide, curved or flat, Fujitsu displays are the heart of smart workplaces in the digital economy.Discover how Fujitsu displays can transform your viewing experience!w ellbeing at work Meet the cleandesk challengeFUJITSU Displaysfor every profileDisplay Quick FinderSave energy with smart displays olutionsReady for a freshview of your smartworkplace?Your choice of display makes a huge difference to health and wellbeing in the work-place. With Fujitsu, you have the confidence that you have made the right decision. We work with leading research organizations such as Fraunhofer Institute for Labor Economics and Organization (IAO) to create h uman-centric products and solutions. Our displays put people first – w ith features that are designed to enhance wellbeing at your desk, and keep you productive during the hours you work.Health first: A smart view on wellbeing at workWorking for a healthy environmentFUJITSU Displays are recognized and certified by leading environmental agencies such as EPA, EPEAT and TCO for their energy efficiency and impact on the environment. Our displays are up to 98% recyclable, helping to protectthe environment for future generations.Ultrawide viewing with IPS technology for clarity from any perspective6-in-1 flexibility: tilt, swivel, height-adjust and rotate your display to exactly the right position for youKeep your eyes healthy: Certified by German TÜV, FUJITSU displays are flicker-free, and with reduced blue-light emissionsFUJITSU Displays for every profileFujitsu displays strike the perfect balance between cutting-edge performance, usability, and reliability. With three product lines (each with a range of different models), you can easily find the right model for your line of work.E-LINEIdeal for home and office environments designedfor e nergy savings and economy■S creen sizes: 21.5 inches (54.6 cm)to 23.8 inches (60.5 cm)■Great viewing with In-Plane-Switching (IPS) technology ■10-finger touch version available■E nergy efficiency: ECO operation mode,ECO key and Status LED■“Backpack solution” for mounting Fujitsu FUTROThin Clients and ESPRIMO Q Mini PCs at rear of display ■Integrated speakersP-LINEP-line Superior displays are your choice forthe u ncompromising m odern workplace■S creen sizes: 23.8 inches (60.5 cm) to 34.1 inches (86.7 cm)■F rameless IPS panels with 100% coverage up to 138%■s RGB color space and up to 98% DCI P3 formaximum visual pleasure■6-in-1 stand: stand (height-adjust, tilt, swivel,pivot, cable guide, ready for backpack solution)■B uilt-in sensors: presence detection,Auto Brightness Control (ABC)■B uilt-in speakers (2x2W), headphone connectors■U SB Type - C docking: with 65W charging,DP Alternate Mode■D isplayView™ software: configure display via mouse(including split screen and multi-monitor control)B-LINEDesigned for the rigors of medium to large o rganizations,with a special e mphasis on healthand wellbeing features and 24/7 use■Screen sizes: 19 inches (48.3 cm) to 31.5 inches (80 cm)■5-in-1 stand (height-adjust, tilt, swivel, pivot, cableguide), picture over desk (down to 40mm)■Built-in speakers and headphone connectors■T actile keys front-side with haptic & sonic feedback,Eco button, multi-color status LED■D isplayView™ software: configure display via mouse(including split screen and multi-monitor control)Save energy with smart display solutionsFUJITSU Displays with built-in sensors* are designed to maximize your energy savings – for the benefit of the environment and your power bills.Presence-sensingThe display goes into sleep mode when you are away from your desk – and senses your presence when you return. For extra security, access is password-protected Auto Brightness Control (ABC)Bright sunlight? Gloomy winter afternoon? YourFujitsu display measures ambient lighting conditionsand adjusts brightness to save energyWorkplace Lighting GuideYour display alerts you if ambient light is too strongor weak, helping you to avoid unnecessary eye strain* Available in select modelsSpace often must double up for other purposes. A desk at home might be in the living space. A desk in the office could be used for a drop-in work session, to be taken over by another user later.A clean desk helps to keep space flexible.Fujitsu offers displays to keep your space clear – featuring one-cable docking systems to eliminate cable clutter, and flexible arms as stands that you can adjust to one height for working, and another for videoconferencing. Fujitsu Client Computing Devices can be hooked to the display’s arm and share its power supply, On/Off key, and LED indicator.Clean screen: on-screen organizationfor more productivityGood organization makes complex tasks easier to manage – and Fujitsu displays with DisplayView™ help you to bring structure to your task layout. The split screen software allows you to embed applications into your choice of layout, so you never lose track of what you are working on. The app is automatically sized to the selected window.It takes two: dual monitor setupsFujitsu offers displays to keep your space clear – featuring one-cable docking systems to eliminate cable clutter, and flexible arms and stands that you can adjust to one height for working, and another for videoconferencing. Fujitsu Client Computing Devices can be hooked to the display’s arm and share its power supply, On/Off key, and LED indicator.Spoilt for choice with the impressive range of Fujitsu displays available? This Quick Finder will help you to locatesuitable displays. Recommendations are based on typical requirements for small and medium-sized enterprises.Fast performance to run complex software, fine resolution for intricate on-screen d etailOptimized for setups with more than one display on the desk – including frameless designs and advanced connectivityAdd touch for greater flexibility in interactionCombine style with substance: a superb-looking display says you mean businessGreat performance and resolution for mainstream office appsB32-9 TS UHD B27-9 TE QHD B27-9 TS QHD P27-8 TS UHDP27-9 TE QHD P27-9 TS QHD P24-8 WE NeoB27-9 TE FHD B27-9 TS FHD B27-9 TE QHD B27-9 TS QHDP27-9 TS B24-9 TE B24-9 TS P24-9 TEP24-8 WE Neo B24-9 WS B24-9 WEE24-9 TouchP34-9 UE P34-9 US B27-9 TE B27-9 TSB24-9 TE B24-9 TSP24-8 WE Neo B24-9 WEB27-8 TE Pro B27-8 TS Pro B24W-7 LED B24-9 WEB24-9 WS B24-8 TE Pro B24-8 TS Pro B24-9 TEB24-9 TSB22-8 WE Neo B22-8 TS ProUSB Type C docking 24/7 operation Document management Budget Space-savingDisplay Quick FinderReady for a fresh view of your smart workplace?Enrich your smart workplace with FUJITSU Displays – and create the spaces for tomorrow’s ideas!© 2021 FUJITSU. All rights reserved.FUJITSU and FUJITSU logo are trademarks of Fujitsu Limited registered in many jurisdictions worldwide. Other product, service and company names mentioned herein may be trademarks of Fujitsu or other companies. This document is current as of the initial date of publication and subject to be changed by Fujitsu without notice. This material is provided for information purposes only and Fujitsu assumes no liability related to its use. We reserve the right to change delivery options or make technical modifications.Learn more about Displays from Fujitsu:→ /global/products/computing/peripheral/displays/。

南天自助终端产品手册2014年南天自助产品中心产品部2014年4月目录1传统自助终端.....................................................大堂式多功能自助终端......................................Nantian BST-4200/C20..................................Nantian BST-5200 A20..................................穿墙式多功能自助终端......................................Nantian BST-4230/C21..................................壁挂式多功能自助终端......................................Nantian BST-3340/C22.................................. 2自助发卡机.......................................................大堂式发卡机..............................................Nantian BST-5200 B20..................................台式发卡机................................................Nantian BST-3340 H10.................................. 3自助回单机.......................................................大堂式自助回单机..........................................Nantian BST-5810A..................................... 4排队机...........................................................大堂式排队机..............................................Nantian BST-5200/E10.................................. 5其他.............................................................网银终端..................................................Nantian BST-4200/G20..................................预填单机..................................................Nantian BST-5200/B10..................................智能服务终端..............................................Nantian BST-4210 A24..................................存折补登机................................................Nantian BST-1100......................................1传统自助终端1.1大堂式多功能自助终端1.1.1N antian BST-4200/C201.1.1.1效果图1.1.1.2结构尺寸图1.1.1.3功能特点外形新颖：整机采用流线型设计；全注塑面板，美观大方；整机色调协调统一；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥式设计，大大提高了用户个人信息的安全性；1.1.1.4标准配置1.1.1.5可扩展配置1.1.2N antian BST-5200 A201.1.2.1效果图1.1.2.2结构尺寸图1.1.2.3功能特点外形新颖：整机采用流线型设计；全注塑面板，美观大方；整机色调协调统一；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥式设计，大大提高了用户个人信息的安全性；1.1.2.4标准配置1.1.2.5可扩展配置1.2穿墙式多功能自助终端1.2.1N antian BST-4230/C211.2.1.1效果图1.2.1.2安装尺寸图1.2.1.3功能特点户外穿墙式应用设计：高附着力，防酸碱腐蚀户外型塑粉喷塑；防水、防尘、防暴；超强的高低温适应能力；功能布局合理：引用ATM 导轨式拉出设计，前面框及各模块可拉出进行维护，方便、快捷；全功能配置：支持存折补登、银行卡查询及转账等多种传统业务功能的同时，能够播放多媒体广告信息，并支持凭条/账单/发票等多种票据的自助打印功能；可扩展型强：支持激光打印机、发票打印机、条码扫描、非接触式IC卡等多种模块扩展功能；数据安全性高：采用硬件加密键盘；配备读卡器异型卡口及密码键盘防窥罩，大大提高了用户个人信息的安全性；智能电源管理：掉电监控、掉电保护、自动维护、自动关机；1.2.1.4标准配置1.2.1.5可扩展配置1.3壁挂式多功能自助终端1.3.1N antian BST-3340/C221.3.1.1效果图1.3.1.2安装尺寸图1.3.1.3功能特点壁挂式设计：不受安装空间限制，可做离行式设备使用；强大的卡业务处理功能：支持磁卡、IC、非接触式IC卡等多种卡片的读写功能；多种扩展功能：条码扫描、非接触式IC卡、发票打印机、GPRS或CDMA无线通信模块；机身色彩个性化定制：机身颜色可根据用户需求进行个性化定制；数据安全：EPP硬件加密键盘，采用凹陷型设计，设计时充分考虑了用户信息安全性；1.3.1.4标准配置1.3.1.5可扩展配置2自助发卡机2.1大堂式发卡机2.1.1N antian BST-5200 B202.1.1.1效果图2.1.1.2安装尺寸图2.1.1.3功能特点先进的自助发卡模块，保障自助发卡的可靠性和安全性。

DEPENDABLEALL-ROUNDERS FOR DYNAMIC TEAMS.PRINT COPY SCAN FAXECOSYS M3040dn ECOSYS M3540dnB/W MULTIFUNCTIONALS FOR A4 FORMATThese MFPs are made for dynamic teams with high demands as to prod­uctivity: they feature printing speeds of 40 ppm and their 75­sheet reversing document processor scans at an impressive rate of 40 ipm. Their integrated file compression function makes it very easy for you to digitise and send large data electronically. Thanks to their long­life components, these devices can achieve the exceptionally low running costs as well as the low environmental impact you come to expect from a genuine KYOCERA MFP.Up to 40 pages per minute in A4Double­sided print, copy, fax * and colour scan functionality 75­sheet reversing document processor supporting A6 originals Mobile printing support including AirPrint Up to 6 input trays for various media typesLow power consumption (TEC) and low­noise mode Exceptionally low printing costs in its classECOSYS M3540dn only1403D S E C O S Y S M 3540D N S E R I E S /E M CYOUR KYOCERA BUSINESS PARTNERKYOCERA Document Solutions Europe B.V. – Branch Office Germany Otto­Hahn­Straße 12 – 40670 Meerbusch – Germany Tel +49 (0) 2159 928­500 – Fax +49 (0) 2159 918­100www.kyoceradocumentsolutions.eu–****************.comKYOCERA Document Solutions Inc. – 2­28, 1­Chome – TamatsukuriChuo­Ku – Osaka 540­8585 – Japan – KYOCERA Document Solutions does not warrant that any specifications mentioned will be error­free. Specifications are subject to change without notice. Information is correct at time of going to press. All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.Depending on the countryECOSYS M3040dn | ECOSYS M3540dn GENERALTechnology: KYOCERA ECOSYS Laser Control panel display: 5 lines LCD display Engine speed: Up to 40 pages A4 per minute Resolution: 1,200 dpi quality (1,800 x 600, print), 600 x 600 dpi, 256 greyscales (scan / copy) Duty cycle: Max. 150,000 pages per month Warm-up time: Approx. 21 seconds or less Time to first print / copy: Approx. 9 seconds or less CPU: PowerPC 465S / 667 MHzMemory: Standard 512 MB, max. 1,536 MBStandard interface: USB 2.0 (Hi­Speed), 2 x USB Host 2.0, GigaBit Ethernet (10BaseT / 100Base­TX / 1000BaseT), slot for optional internal interface or SSD hard disc, slot for optional S D / S DHC ® cardIntegrated accounting: 100 department codes Dimensions (W x D x H): 475 x 455 x 575 mm Weight: Approx. 21,5 kgPower source: AC 220 ~ 240 V, 50 / 60 Hz Power consumption ECOSYS M3040dn ECOSYS M3540dnCopying / Printing: 679 W 680 W Ready mode: 53.7 W 54.7 W Low­power mode: 28.7 W 29.7 W Sleep­mode: 2.6 W2.6 WNoise (Sound pressure level): ISO 7779 / ISO 9296): ECOSYS M3040dn ECOSYS M3540dn Ready mode: 26.8 dB (A) LpA 26.5 dB (A) LpA Copying / Printing: 51.4 dB (A) LpA 51.1 dB (A) LpA Quiet mode: 48.9 dB (A) LpA 48.9 dB (A) LpA Typical Electricity Consumption (TEC): 2.2 KWh / week Safety standards: TÜV / GS, CEThis unit is manufactured according to ISO 9001 quality standard and ISO 14001 environmental standard. PAPER HANDLINGAll paper capacities quoted are based on a paper thick­ness of max. 0.11 mm. Please use paper recommended by KYOCERA under normal environmental conditions.Input capacity: 100­sheet multi­purpose tray; 60 – 220 g/m 2; A4, A5, A6, B5, Letter, Legal, Custom (70 x 148 – 216 x 356 mm) 500­sheet universal paper cassette, 60 – 120 g/m 2; A4, A5, B5, Letter, Legal, Custom (140 x 210 – 216 x356 mm) Max. input capacity incl. options: 2,600 sheets Duplex unit: Duplex as standard supports A4, A5, B5, Letter, Legal, Custom (140 x 210 mm – 216 x 356 mm), 60–120 g/m 2Reversing document processor: 75­sheet, 50–120 g/m 2, A4, A5, A6, B5, Letter, Legal, Custom (105 x 148 to 216 x 356 mm)Output capacity: 250­sheet­face­down with paper full sensorPRINT FUNCTIONSController language: PRESCRIBE IIeEmulations: PCL 6 (5c / XL), KPDL 3 (PostScript 3­compat­ible), Line Printer, IBM Proprinter X24E, Epson LQ­850, PDF Direct Print 1.7, XPS Direct PrintOperating systems: All current Windows operating systems, MAC OS X version 10.5 or higher, Unix, Linux as well as other operating systems on requestFonts / barcodes: 93 outline fonts (PCL 6, KPDL 3) + 8 (Windows Vista), 1 bitmap font, 45 types of one­dimen­sional barcodes, 1 type of two­dimensional barcode (PDF417)Features: AirPrint, Encrypted PDF Direct Print, IPP printing, Email printing, WSD print, Secure printing via SSL, IPsec, HTTPS, SNMPv3, IPPS, POP over SSL, SMTP over SSL, FTP over SSL, Private Print, Toner save mode COPY FUNCTIONS Max. original size: A4 / Legal Continuous copying: 1 – 999 Zoom range: 25 – 400 % in 1 % stepsPreset magnification ratios: 7 reductions / 5 enlargements Exposure mode: Auto, manual: 9 stepsImage adjustments: Text + photo, text, photo, graphic/map Features: Scan­once­copy­many, electronic sort, 2in1, 4in1, ID­card copy, job reserve, priority print, program, auto duplex copy, split copy, continuous scan, auto cassette change, copy density control SCAN FUNCTIONSFunctionality: Scan­to­e­mail, Scan­to­FTP , Scan­to­SMB, Scan to USB Host, TWAIN scan (USB, network), WSD (WIA) scan (USB, network)Scan speed: 40 ipm (300 dpi, A4, b/w), 30 ipm (600 dpi, A4, b/w, 300 dpi, A4, colour)Scan resolution: 600, 400, 300, 200 dpi (256 greyscales) Max. scan size: A4, LegalOriginal recognition: Text, photo, text + photo, for OCR File types: PDF (high compression, encrypted, PDF/A), JPEG, TIFF, XPSCompression method : MMR / JPEGFeatures: Colour scan, integrated address book, Active Directory support, encrypted data transfer, multi­send (e­mail, fax, SMB / FTP folder, print) at once FAX FUNCTIONS (ECOSYS M3540dn only)Compatibility: ITU ­T Super G3 Modem speed: Max. 33.6 kbpsTransmission speed: Less than 3 seconds Scanning speed: 2.5 seconds One-touch dial: 22 numbers Address book: 100 entriesScanning density Normal: 200 x 100 dpi Fine: 200 x 200 dpiSuperfine: 200 x 400 dpi Ultrafine: 400 x 400 dpi Halftone: 256 greyscales Maximum original size: A4, Legal Compression method: JBIG, MMR, MR, MH Memory reception: 256 sheets or moreFeatures: Network fax, duplex transmission and reception, encrypted transmission and reception, polling transmission and reception, broadcast OPTIONSPaper handlingPF-320 Paper feeder (max. 4 units): Max. 500 sheets; 60 – 120 g/m2; A4, A5, B5, Letter, Legal, Custom (148 x 210 mm – 216 x 356 mm) Memory upgradeMDDR3-1GB: 1,024 MBHD-6 SSD hard disc: 32 GB for easy document management HD-7 SSD hard disc: 128 GB for easy document management Data security kit (E): in line with security level EAL3UG-33: ThinPrint supportUSB IC Card Reader + Card Authentication Kit (B) Support for various authentication keys available Optional interfacesIB-50 Gigabit Ethernet: 10BaseT / 100BaseTX / 1000BaseT IB-51 Wireless LAN: 802.11b / g / nCB-360 Cabinet: Wooden desk with storage capacity CONSUMABLESAverage continuous toner yield in accordance with ISO / IEC 19752TK-3100 Toner-Kit: Microfine toner for 12,500 pages A4 Capacity of starter toner is 6,000 pages A4 WARRANTY1­year warranty * as standard. Kyocera guarantees the drum and developer for 3 years or 300,000 pages (whichever occurs sooner), provided each device is used and cleaned in accordance with the service instructions.Up to 5­year on­site warranty extensions available for printerand options.ECOSYS stands for ECOlogy, ECOnomy and SYStem printing. With their long­life components, ECOSYS devices are designed to maximise durability and minimise theconcept allows you to add workflow­enhancing functions as required. Integrated system software provides long­term cross­network compatibility.。

( V ) Preliminary Specifications( ) Final SpecificationsModule 10.4 Inch Color TFT-LCD Model Name G104STN01.0Customer Date Checked &Approved by Approved by DateGrace Hung 2013/08/16 Prepared byJohnson Lin 2013/08/16 General Display Business Division / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (9)4. Absolute Maximum Ratings (10)4.1 Absolute Ratings of TFT LCD Module (10)4.2 Absolute Ratings of Environment (10)5. Electrical Characteristics (11)5.1 TFT LCD Module (11)5.2 Backlight Unit (13)6. Signal Characteristics (14)6.1 Pixel Format Image (14)6.2 Scanning Direction (14)6.3 TFT-LCD Interface Signal Description (15)6.4 The Input Data Format (16)6.5 TFT-LCD Interface Timing (17)6.6 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT-LCD Signal (CN1): LVDS Connector (19)7.2 LED Backlight Unit (CN2): Driver Connector (19)7.3 LED Backlight Unit (CN4): Light bar Connector (19)8. Reliability Test Criteria (20)9. Mechanical Characteristics (21)9.1 LCM Outline Dimension (Front View) (21)9.2 LCM Outline Dimension (Rear View) (22)10. Label and Packaging (23)10.1 Shipping Label (on the rear side of TFT-LCD display) (23)10.2 Carton Package (23)11 Safety (25)11.1 Sharp Edge Requirements (25)11.2 Materials (25)11.3 Capacitors (25)11.4 National Test Lab Requirement (25)Record of RevisionVersion and Date Page Old description New Description1. Operating Precautions1) Since front polarizer is easily damaged, please be cautious and not to scratch it.2) Be sure to turn off power supply when inserting or disconnecting from input connector.3) Wipe off water drop immediately. Long contact with water may cause discoloration orspots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped onhard surface.6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handlingTFT-LCD Module.7) Do not open nor modify the module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if a module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nortilt the Interface Connector of the TFT Module.11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a veryshort time. Please design your display product well to avoid external force applying to module by end-user directly.12) Small amount of materials without flammability grade are used in the TFT-LCD module. TheTFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.13) Severe temperature condition may result in different luminance, response time and lampignition voltage.14) Continuous operating TFT-LCD display under low temperature environment may acceleratelamp exhaustion and reduce luminance dramatically.15) The data on this specification sheet is applicable when LCD module is placed in landscapeposition.16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to usescreen saver or shuffle content periodically if fixed pattern is displayed on the screen.2. General DescriptionThis specification applies to the Color Active Matrix Liquid Crystal Display G104STN01.0composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits).LED driving board for backlight unit is included in G104STN01.0 and the LED unit is replaceable. All input signals are LVDS interface and compatible with G104SN02 V2.G104STN01.0 designed with wide viewing angle; wide temperature and long life LED backlight is well suited for industial applications. G104STN01.0 is a RoHS product.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 ℃ condition: ItemsUnitSpecifications Screen Diagonal [inch] 10.4Active Area [mm] 211.2 (H) x 158.4 (V) Pixels H x V 800 x 3(RGB) x 600 Pixel Pitch [mm] 0.264 x 0.264 Pixel Arrangement R.G.B. Vertical Stripe Display ModeTN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 2.88WAll black pattern Weight [Grams] 365(Typ.)Physical Size [mm] 243.0(H) x 184.0(V) x 6.5(D)(Typ.) Electrical Interface 1 channel LVDS Surface Treatment Anti-glare, Hardness 3H Support Color16.2M / 262K colors Temperature Range OperatingStorage (Non-Operating) [o C] [o C]-20 to +80 -20 to +80 RoHS ComplianceRoHS Compliance2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25 (Room Temperature):℃Item Unit Conditions Min. Typ. Max. RemarkWhite Luminance[cd/m2] I F = 50mA/1 LED Line (center point) 300 400 -1 Uniformity % 5 Points 65 75 -2,3 Contrast Ratio500 700 - 4[msec]Rising - 10 20 [msec] Falling- 5 15 Response Time[msec] Raising + Falling - 15 35 5 [degree] [degree] Horizontal (Right) CR = 10 (Left) 70 70 80 80 - - Viewing Angle[degree] [degree]Vertical (Upper) CR = 10 (Lower) 50 60 60 70 - - 6 Red x - TBD - Red y - TBD - Green x- TBD - Green y - TBD - Blue x - TBD - Blue y - TBD - White x 0.28 0.31 0.34 Color / ChromaticityCoordinates (CIE 1931)White y0.30 0.33 0.36 Color Gamut%50-Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture1with 50cm viewing distance ∘Test Point CenterEnvironment < 1 luxModule Driving EquipmentNote 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminanceNote 4: Definition of contrast ratio (CR):Note 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval isNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and ≧180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desiredMinimum Brightness of five pointsδW9 = Maximum Brightness of five points Contrast ratio (CR)=Brightness on the “White” stateBrightness on the “Black” statemeasurement viewing angle.3. Functional Block DiagramThe following diagram shows the functional block of the 10.4 inch color TFT/LCD module:4. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max Unit Logic/LCD Drive Voltage Vin -0.3 +4.0 [Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max Unit Operating Temperature TOP -20 +80 [o C] Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -20 +80 [o C] Storage Humidity HST 5 95 [%RH] Note: Maximum Wet-Bulb should be 39℃ and no condensation.5. Electrical Characteristics 5.1 TFT LCD Module5.1.1 Power SpecificationSymbol Parameter Min Typ Max Units RemarkVDD Logic/LCD Input Voltage 3.0 3.3 3.6 [Volt]I VDD LCD Input Current - 320 - [mA]VDD=3.3V at 60 HZ, all Black PatternP VDD LCD Power comsumption - - 1.5 [Watt] VDD=3.3V at 60 HZ, all Black Pattern I rush LCDLCD Inrush Current-1.06-[A] Note 1; VDD=3.3VBlack Pattern, Rising time=470usVDD rpAllowable Logic/LCDDrive Ripple Voltage- -100 [mV] p-pVDD=3.3V at 60 HZ, all Black PatternNote 1: Measurement condition:VDD rising time0V3.3V5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Note: LVDS Signal Waveform.Symbol ItemMin. Typ.Max. Unit RemarkVTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V ｜VID ｜Input Differential Voltage100 400 600 [mV] VICMDifferential Input Common Mode Voltage1.1251.251.375[V]VTH/VTL=+-100mV5.2 Backlight Unit5.2.1 Parameter guideline for LED backlightFollowing characteristics are measured under a stable condition using a inverter at 25℃. (Room Temperature): Symbol Parameter Min.Typ.Max.Unit RemarkVCC Input Voltage 10.8 12 12.6 [Volt]I VCC Input Current - 0.32 - [A] 100% PWM DutyP VCC Power Consumption - 2.88 - [Watt] 100% PWM DutyF PWM Dimming Frequency 200 - 20K [Hz]Swing Voltage 3 3.3 5.5 [Volt]Dimming duty cycle 5 - 100 %I F LED Forward Current-50 -[mA] Ta = 25o C- 27.2 - [Volt]I F = 50mA, Ta = -30o C V F LED Forward Voltage- 26.4 28.8 [Volt]I F = 50mA, Ta = 25o C- 25.6 - [Volt]I F = 50mA, Ta = 85o C P LED LED Power Consumption- 2.72 - [Watt]Operation Life 50,000 - - Hrs I F=50mA, Ta= 25o CNote 1: Ta means ambient temperature of TFT-LCD module.Note 2: VCC, I VCC, I rush LED, P VCC are defined for LED backlight.(100% duty of PWM dimming)Note 3: I F, V F are defined for one channel LED. There are two LED channel in back light unit.Note 4: If G104STN01.0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced.Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data.6. Signal Characteristics6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.1st2nd799th800th1stLine600thLin6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)6.3 TFT-LCD Interface Signal DescriptionThe module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device.Input Signal Interface Pin No. SymbolDescription 1 VDD Power Supply, 3.3V (typical) 2 VDD Power Supply, 3.3V (typical) 3 GND Ground4 DPS Reverse Scan Function [H: Enable; L/NC: Disable]5 RxIN0-6 RxIN0+ LVDS receiver signal channel 0LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0)7 GND Ground8 RxIN1- 9 RxIN1+ LVDS receiver signal channel 1LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1) 10 GND Ground11 RxIN2- 12 RxIN2+ LVDS receiver signal channel 2LVDS Differential Data Input (B2, B3, B4, B5, DE)13 GNDGround14 RxCLKIN- 15 RxCLKIN+ LVDS receiver signal clock 16 GND Ground17 RxIN3- 18 RxIN3+ LVDS receiver signal channel 3, pin17=3.3V&pin 18=GND for 6bit LVDS InputLVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)19 RSVReserved for AUO internal test. Please treat it as NC.20SEL68 6/8bits LVDS data input selection [H: 8bits L/NC: 6bit]Note 1: Input Signals shall be in low status when VDD is off.Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”. Note 3: RSV stands for “Reserved”.6.4 The Input Data Format6.4.1 SEL68SEL68 =“Low” or “NC” for 6 bits LVDS InputSEL68 = “High” for 8 bits LVDS InputNote1: Please follow PSWG.Note2: R/G/B data 7:MSB, R/G/B data 0:LSBSignal Name DescriptionRemarkR7R6R5R4R3R2R1R0Red Data 7 Red Data 6 Red Data 5 Red Data 4 Red Data 3 Red Data 2 Red Data 1 Red Data 0 Red-pixel DataFor 8Bits LVDS input MSB: R7 ; LSB: R0For 6Bits LVDS input MSB: R5 ; LSB: R0G7G6G5G4 G3G2G1 G0Green Data 7 Green Data 6 Green Data 5 Green Data 4Green Data 3 Green Data 2 Green Data 1Green Data 0 Green-pixel DataFor 8Bits LVDS input MSB: G7 ; LSB: G0For 6Bits LVDS input MSB: G5 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0 Blue Data 7 Blue Data 6 Blue Data 5 Blue Data 4 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 Blue-pixel DataFor 8Bits LVDS input MSB: B7 ; LSB: B0For 6Bits LVDS input MSB: B5 ; LSB: B0 RxCLKIN LVDS Data ClockDE Data Enable SignalWhen the signal is high, the pixel data shall be valid to be displayed.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.NS-like format6.5 TFT-LCD Interface Timing6.5.1 Timing CharacteristicsSignal Symbol Min. Typ. Max. Unit Clock Frequency 1/ T Clock 30 40 50 MHzPeriod T V 608 628 1024 Active T VD -- 600-- Vertical SectionBlankingT VB 8 28 424 T Line Period T H 960 1056 1060Active T HD -- 800 -- Horizontal SectionBlankingT HB 160 256 260 T ClockFrame RateF 506075Hz Note : DE mode.6.5.2 Input Timing DiagramDOTCLKDEHT HBDET VDInput Timing Definition ( DE Mode)Input Data Invaild Data Invaild Data6.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power ON/OFF sequence timingValue UnitsParameterMin. Typ. Max.T10.5 - 10 [ms]T2 30 40 50 [ms]T3 200 -- -- [ms]T4 0.5 -- 10 [ms]T5 10 - - [ms]T6 10 - - [ms]T7 0 - - [ms]T8 10 - - [ms]T9 -- -- 10 [ms]T10 110 -- -- [ms]T11 0 16 50 [ms]T12 - - 10 [ms]T13 1000 - - [ms]The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.7. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.7.1 TFT-LCD Signal (CN1): LVDS ConnectorConnector Name / Designation Signal ConnectorManufacturer STM or compatibleConnector Model Number MSB24013P20HA or compatibleAdaptable Plug P24013P20 or compatiblePin No. Symbol Pin No. Symbol1 VDD2 VDD3 GND4 DPS5 RxIN0-6 RxIN0+7 GND 8 RxIN1-9 RxIN1+ 10 GND11 RxIN2- 12 RxIN2+13 GND 14 RxCKIN-15 RxCKIN+ 16 GND17 RxIN3- 18 RxIN3+19 RSV 20 SEL687.2 LED Backlight Unit (CN2): Driver ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number 3808K-F05N-12R or compatibleMating Model Number H208K–P05N-02B or compatiblePin No. symbol descriptionPin1 VCC 12V inputPin2 GND GNDPin3 On/OFF 5V-ON,0V-OFFPin4 Dimming PWMPin5 NA7.3 LED Backlight Unit (CN4): Light bar ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number H208K–P03N-02B or compatibleMating Model Number(CN3) 3808K-F03N-12R or compatiblePin No. symbol description ColorPin1 H LED anode RedPin2 L LED cathode WhitePin3 L LED cathode Black8. Reliability Test CriteriaItems Required Condition Note Temperature Humidity Bias 40℃, 90%RH, 300 hoursHigh Temperature Operation 80℃, 300 hoursLow Temperature Operation -20℃, 300 hoursHot Storage 80,℃ 300 hoursCold Storage -20,℃ 300 hoursThermal Shock Test -20/℃ 30 min, 60/℃ 30 min, 100cycles, 40℃minimun ramp rateHot Start Test 80℃/ 1Hr min. power on/off per 5 minutes, 5 timesCold Start Test -20℃/ 1Hr min. power on/off per 5 minutes, 5 timesShock Test (Non-Operating) 50G, 20ms, Half-sine wave, ( ±X, ±Y, ±Z)Vibration Test (Non-Operating) 1.5G, (10~200Hz, Sine wave)30 mins/axis, 3 direction (X, Y, Z)On/off test On/10 sec, Off/10 sec, 30,000 cyclesESD Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointAir Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointNote 1EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/mNote1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No hardware failures.Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.G104STN01.09. Mechanical Characteristics工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司G104STN01.09.2 LCM Outline Dimension (Rear View)工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司G104STN01.010. Label and Packaging10.1 Shipping Label (on the rear side of TFT-LCD display)10.2 Carton PackageNote:Max capacity ：20 TFT-LCD module per cartonMax weight: 11.5 kg per cartonOutside dimension of carton: 477mm(L)* 290mm(W)*360mm(H)Pallet size ： 1180 mm * 980 mm * 135mmBox stackedModule by air ：(2 *4) *4 layers ，one pallet put 32 boxes ，total 640pcs module Module by sea ：(2 *4) *4 layers + (2 *4) *1 layers , two pallet put 40 boxes ，total 800pcs module Module by sea_HQ ：(2 *4) *4 layers+(2 *4) *2 layers, two pallet put 48 boxes, total 960pcs module工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司杭州旭虹科技有限公司11 Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 1950, First EditionU.S.A. Information Technology Equipment杭州旭虹科技有限公司。

Crestron常用产品资料汇总一、系统主机系列CP2的技术参数：Crestron 第二代经济型双总线控制主机；Motorola Coldfire 处理器具有3个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有8个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有8个30V/1A的弱电继电器；具有8个模拟或数字的I/O口；具有4芯标准Crestron网络接口一个；后面板具有一个编程/调试用的计算机DB9接口；CP2E的技术参数：Crestron 第二代经济型双总线控制主机；Motorola Coldfire 处理器具有3个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有8个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有8个30V/1A的弱电继电器；具有8个模拟或数字的I/O口；具有1个10M/100M自适应以太网网卡；具有4芯标准Crestron网络接口一个；后面板具有一个编程/调试用的计算机DB9接口；MP2的技术参数：Crestron 第二代经济型双总线控制主机；Motorola Coldfire 处理器具有2个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有4个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有4个30V/1A的弱电继电器；具有4个模拟或数字的I/O口；具有4芯标准Crestron网络接口一个；后面板具有一个编程/调试用的计算机DB9接口；4×2视频转换，7×1音频转换，内置音量控制和参数均衡器MP2E的技术参数：Crestron 第二代经济型双总线控制主机；Motorola Coldfire 处理器具有2个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有4个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有4个30V/1A的弱电继电器；具有4个模拟或数字的I/O口；具有1个10M/100M自适应以太网网卡；具有4芯标准Crestron网络接口一个；后面板具有一个编程/调试用的计算机DB9接口；4×2视频转换，7×1音频转换，内置音量控制和参数均衡器AV2的技术参数：Crestron 第二代专业双总线控制主机；Motorola Coldfire 处理器具有6个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有8个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有8个30V/1A的弱电继电器；具有8个模拟或数字的I/O口；具有1个Z BUS插槽，可安装C2ENET-1/C2ENET-2卡，连接到LAN/WAN；具有1个闪存插槽；具有4芯标准Crestron网络接口一个；前/后面板具有一个编程/调试用的计算机DB9接口；PRO2的技术参数：Crestron 第二代专业双总线控制主机；Motorola Coldfire 处理器具有6个RS232/422/485控制接口；支持硬件/软件握手，最高波特率达115200bps；具有8个IR/单向RS232控制接口；作为红外输出时频率达1.2MHz；作为单向RS232输出时最高波特率达115200bps；具有8个30V/1A的弱电继电器；具有8个模拟或数字的I/O口；具有1个Z BUS插槽，可安装C2ENET-1/C2ENET-2卡，连接到LAN/WAN；具有3个Y BUS插槽，可插入红外卡、弱电继电器卡、RS232卡等，从而增加控制接口；具有1个闪存插槽；具有4芯标准Crestron网络接口一个；前/后面板具有一个编程/调试用的计算机DB9接口；LCD前显示/操作面板；MPS-200多媒体控制主机MPS-200是会议室和教室报告演讲系统完整的解决方案，在2U机柜的空间中同时集成了控制系统，多媒体切换器，音频处理器以及功放的功能。

Why a smartfactory?Because this is the future.In the smart factory, state-of-the-artsoftware provides real-time data fromconnected devices enabling them tolearn and adapt to changing demandson the production lines.The technology contributes tomanaging the entire productionprocess and enables continuousimprovements in productivity andend-product quality.How Atlas Copco cantake you one step closerAtlas Copco has the technology to solve yourproduction challenges. Technology that can operateseveral tools using only one physical controller, predicttool failures, and suggest maintenance schedules.Technology that gives valuable insights into the data it generates from previous production programs. The data continuously created by Atlas Copco smart tools and solutions can be used to maximize uptime and quality in your operation and cut yourWe present our Power Focus Offering. It's smart!What do you need in order to create a smart assembly?Power up your tightening stationsTurboTight for STR tools and TensorPulse and TurboTight for SRB tools help minimize Improves ergonomics by eliminating reaction force; increased productivity due to faster tightening time TBP SRB ST WrenchTensor STRQST Tensor SLMWR-TA MWR-STensor STB Tensor ES Tensor SBTBP-S BCP-REIAM Power Focus Power Focus 6000Fieldbus modulesController accessoriesElectronic deliveryPhysical deliveryItemOrder nr.Hardware Power Focus 60008436 1800 02Power Focus 6000 LV8436 1800 11ItemOrder nr.Profibus 8436 0940 05DeviceNet8436 0940 10Ethernet/IP 2 PORT 8436 0940 15ProfiNet I/O 2 PORT 8436 0940 20Anybus CC – CC Link 8436 0940 25Anybus CC – CC Link IE8436 0940 30Open Protocol Extension Open Protocol Extension 1 pcs 8436 1950 20TrueAngle TrueAngle 1 pcs8436 1910 03StepSync StepSync 1 pcs8436 1950 00Industrial Location Guidance Industrial Location Guidance 1 pcs8436 1950 10 SoftPLC SoftPLC 1 pcs 8436 1910 04Yield Control Yield Control 1 pcs8436 1910 06ItemOrder nr.Low Reaction Strategies Low Reaction Strategies 1 pcs 8436 1910 80Electronic deliveryJoint ControlJoint Control Virtual Station 1 pcs 8436 1960 20Station ControlStation Control Virtual Station 1 pcs 8436 1960 30Critical ControlCritical Control Virtual Station 1 pcs 8436 1960 40Process ControlProcess Control Virtual Station 1 pcs8436 1960 50ItemOrder nr.Batch ControlBatch Control Virtual Station 1 pcs 8436 1960 10Physical deliveryItemOrder nr.Batch ControlBatch Control Virtual Stations 1 pcs 8436 1960 11Batch Control Virtual Stations 2 pcs 8436 1960 12Batch Control Virtual Stations 5 pcs 8436 1960 15Batch Control Virtual Stations 10 pcs 8436 1960 16Joint ControlJoint Control Virtual Station 1 pcs 8436 1960 21Joint Control Virtual Station 2 pcs 8436 1960 22Joint Control Virtual Station 5 pcs 8436 1960 25Joint Control Virtual Station 10 pcs 8436 1960 26Station ControlStation Control Virtual Station 1 pcs 8436 1960 31Station Control Virtual Station 2 pcs 8436 1960 32Station Control Virtual Station 5 pcs 8436 1960 35Station Control Virtual Station 10 pcs 8436 1960 36Critical ControlCritical Control Virtual Station 1 pcs 8436 1960 41Critical Control Virtual Station 2 pcs 8436 1960 42Critical Control Virtual Station 5 pcs 8436 1960 45Critical Control Virtual Station 10 pcs 8436 1960 46Process ControlProcess Control Virtual Station 1 pcs 8436 1960 51Process Control Virtual Station 2 pcs 8436 1960 52Process Control Virtual Station 5 pcs 8436 1960 55Process Control Virtual Station 10 pcs8436 1960 56ItemOrder nr.Low Reaction Strategies Low Reaction Strategies 1 pcs 8436 1910 81Low Reaction Strategies 2 pcs 8436 1910 82Low Reaction Strategies 5 pcs 8436 1910 85Low Reaction Strategies 10 pcs 8436 1910 86TrueAngle TrueAngle 1 pcs 8436 1910 31TrueAngle 2 pcs 8436 1910 32TrueAngle 5 pcs 8436 1910 35TrueAngle 10 pcs 8436 1910 36SoftPLC SoftPLC 1 pcs 8436 1910 41SoftPLC 2 pcs 8436 1910 42SoftPLC 5 pcs8436 1910 45SoftPLC 10 pcs 8436 1910 46Yield ControlYield 1 pcs 8436 1910 61Yield 2 pcs8436 1910 62Yield 5 pcs 8436 1910 65Yield 10 pcs8436 1910 66Open Protocol Extension OP Extension 1 pcs 8436 1950 21OP Extension 2 pcs 8436 1950 22OP Extension 5 pcs 8436 1950 25OP Extension 10 pcs 8436 1950 26Industrial Location Guidance Industrial Location Guidance 1 pcs8436 1950 11 StepSync StepSync 1 pcs8436 1950 01ItemOrder nr.PF6000 Mounting Stand 4222 1736 80PF6000 Adapter Plate 4222 1783 80PF6000 Security Seal4222 1736 03PF6000 Communication Cable 1M 4222 1721 01PF6000 Communication Cable 3M 4222 1721 03PF6000 Communication Cable 5M4222 1721 05ItemOrder nr.Power Focus IAM8436 0910 00ItemOrder nr.Line Configurator – Electronic Delivery ToolsTalk 2 Line Configurator 1 pcs 8092 1714 02Line Configurator – Physical Delivery ToolsTalk 2 Line Configurator 1 pcs 8092 1714 03ToolsTalk 2 Line Configurator 5 pcs 8092 1714 04ToolsTalk 2 Line Configurator 10 pcs8092 1714 05Line Manager – Electronic Delivery ToolsTalk 2 Line Manager 1 pcs 8092 1714 06Line Manager – Physical Delivery ToolsTalk 2 Line Manager 1 pcs 8092 1714 07ToolsTalk 2 Line Manager 5 pcs 8092 1714 08ToolsTalk 2 Line Manager 10 pcs8092 1714 09ItemOrder nr.Electronic DeliveryManual Tightening Control 1 pcs 8436 1970 20Physical DeliveryManual Tightening Control 1 pcs 8436 1970 21Manual Tightening Control 2 pcs 8436 1970 22Manual Tightening Control 5 pcs 8436 1970 25Manual Tightening Control 10 pcs8436 1970 26FMS PortableThe FMS Portable is a great option for you who does not have the controllers networked.With the Atlas Copco FMS Portable it is possible to load and distribute virtual stations and features to individual controllers.Total Workstation SolutionsIn the Smart Connected Ecosystem, Atlas Copco offers Total WorkstationSolutions with reaction supports, including arms, visualization equipment, positioning solutions, and error proofing accessories. Atlas Copco also offers an assembly software suite for collecting and analyzing tightening data and managing quality assurance. In addition, Atlas Copco can provide station control and work guidance solutions ItemOrder nr.FMS Portable8436 1910 99At Atlas Copco service, we create the best value from your investmentsEvery production line and industrial site is unique and has its own challenges. With that in mind, our service solutions are designed to help you get the most out of your industrial equipment. We combine analysis of production data with know-how and expertise to enhance your productivity and quality, while maximizing the cost efficiency of your maintenance.Service solutions from Atlas CopcoFor Power Focus 6000, tools and software, we can provide a wide range of services■Startup, calibration and programing of the tightening system. ■Optimized maintenance solutions for cost savings and higher uptime.■Operator training on systems and products.■Tightening Services – a consultancy service for optimized tightening results.Atlas Copco offers worldwide service■We have a global presence and can support you at every step of the assembly production process.■Standard service products and tailor-made solutions are available.Contact us!As your dedicated assembly partner, Atlas Copco has the technology you need to handle today’s and future production challenges.Our Smart Connected Ecosystem will meet all your needs and keep your operation ahead of the game in a sustainable way.Atlas Copco Industrial Technique AB (publ) SE-105 23 Stockholm, Sweden Phone: +46 8 743 80 00Reg. no: 556014-27209 8 3 3 2 2 1 9 0 1–E N ©A t l a s C o p c o I n d u s t r i a l T e c h n i q u e A B , S t o c k h o l m , S w e d e n . P r o d u c t i o n。

附带的手册本机附带以下手册。

请根据需要参考合适的手册。

操作手册（本手册）说明如何装入纸张、基本复印操作以及故障排除。

高级操作手册详细介绍复印功能以及默认设定。

快速参考指南列出并简要介绍机器的复印功能。

i本手册中使用的安全规范使用本机前请阅读操作手册。

请将其放置在机器附近以便查阅。

本手册章节以及本机上标识的符号为安全警告，旨在保护用户、他人与周围的物体，并确保机器的使用正确、安全。

这些符号及其含义如下。

符号符号表示相关内容含有安全警告信息。

具体注意要点在符号内标出。

符号表示相关内容含有禁止操作的信息。

具体禁止操作内容在符号内标出。

z 符号表示相关部位含有必须操作的信息。

具体要求操作内容在符号内标出。

若操作手册的安全警告无法辨识，或操作手册遗失，请与维修服务人员联系，向其索要更换。

（付费）警告：表示若对相关要点不引起充分重视或不正确执行，则可能会导致严重人身伤害，甚至死亡。

小心：表示若对相关要点不引起充分重视或不正确执行，则可能会导致人身伤害，或机械损坏。

....[一般警告]....[触电危险警告]....[高温警告]....[禁止操作警告]....[禁止拆解]....[要求操作警示]....[拔下电源插头]....[本机务必使用有接地连接的插座]内容法律信息和规范 (ix)1部件名称 ..................................................................................................1-1主机 ..........................................................................................................1-2操作面板 ..................................................................................................1-5触摸面板 ..................................................................................................1-62使用准备 ..................................................................................................2-1装纸 ..........................................................................................................2-2设定纸盒和手送纸盘中的纸张类型和尺寸 ..........................................2-7装入原稿 ................................................................................................2-14语言 ........................................................................................................2-183基本操作 ..................................................................................................3-1基本复印步骤 ..........................................................................................3-2选择原稿模式 ..........................................................................................3-4调节浓度 ..................................................................................................3-5缩小／放大 ..............................................................................................3-6双面模式 ................................................................................................3-10分割模式 ................................................................................................3-13分页模式 ................................................................................................3-15插印 ........................................................................................................3-16节能模式 ................................................................................................3-17睡眠模式 ................................................................................................3-174选购设备 ..................................................................................................4-1选购设备概述 ..........................................................................................4-2送稿器 ......................................................................................................4-3供纸盒 ......................................................................................................4-3内置装订器 ..............................................................................................4-3装订器 ......................................................................................................4-6作业分离器 ..............................................................................................4-6打印组件 ..................................................................................................4-7传真组件 ..................................................................................................4-75保养 ..........................................................................................................5-1清洁 ..........................................................................................................5-2更换墨粉盒和废粉盒 ..............................................................................5-76故障排除 ..................................................................................................6-1解决故障 ..................................................................................................6-2针对错误信息的解决措施 ......................................................................6-4清除卡纸 ..................................................................................................6-87附录 ..........................................................................................................7-1在触摸面板上输入字符 ..........................................................................7-2纸张 ..........................................................................................................7-5规格 ..........................................................................................................7-6索引 ................................................................................................. 索引-1 ii小心／警告标签出于安全考虑，本机以下位置贴有小心标识。