下载文档原格式
Dake CorporationPhone: 800.937.3253DAKE RATCHET LEVER ARBOR PRESSModel 4MINSTRUCTIONAL MANUALWARNING!Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury.TABLE OF CONTENTSDAKE STANDARD LIMITED WARRANTY (2)RETURN & REFUND POLICY (4)DAKE STANDARD TERMS & CONDITIONS OF SALE (5)SPECIFICATIONS (6)SAFETY (6)HANDLE POSITION (7)OPERATION (7)MAINTENANCE (7)LUBRICATION (7)EXPLODED VIEW & PARTS LIST (8)EXPLODED PARTS VIEW (8)PARTS LIST (9)ORDERING INFORMATION (9)DAKE STANDARD LIMITED WARRANTYFinished MachinesDake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.PartsDake warrants to the original purchaser the component part manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 30 days from the delivery date to the end user. The standard limited warranty includes the replacement of the defective component part at no cost to the end user.Sale of Service (Repairs)Dake warrants to the original purchaser the component part repaired by Dake Corporation at the manufacturing facility to be free from defects in material and workmanship under normal use and service within 90 days from the return date to the end user, as it pertains to the repair work completed. The standard limited warranty includes repair of the defective component part, at no cost to the end user. Warranty ProcessSubject to the conditions hereinafter set forth, the manufacturer will repair or replace any portion of the product that proves defective in materials or workmanship. The manufacturer retains the sole right and option, after inspection, to determine whether to repair or replace defective equipment, parts or components. The manufacturer will assume ownership of any defective parts replaced under this warranty.All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, the Warranty Representative at Dake Customer Service must be contacted for approval:Phone: (800) 937-3253Email: ****************************When contacting Dake, please have the following information readily available: - Model # - Serial # - Sales Order #Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed.Warranty Exceptions:The following conditions are not applicable to the standard limited warranty:a) Part installation or machine service was not completed by a certified professional, and is not inaccordance with applicable local codes, ordinances and good trade practices.b) Defects or malfunctions resulting from improper installation or failure to operate or maintain theunit in accordance with the printed instructions provided.c) Defects or malfunctions resulting from abuse, accident, neglect or damage outside of prepaidfreight terms.d) Normal maintenance service or preventative maintenance, and the parts used in connection withsuch service.e) Units and parts which have been altered or repaired, other than by the manufacturer specificallyauthorized by the manufacturer.f) Alterations made to the machine that were not previously approved by the manufacturer, or thatare used for purposes other than the original design of the machine.RETURN & REFUND POLICYThank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help.ReturnsAll Dake manufactured / distributed machines and parts include a 30-day return option. These policies are valid from the date of final shipment to the end user.To be eligible for a return, the item must be unused and in the same condition as received.All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, Dake Customer Service must be contacted for approval by the distributor or representative: Phone: (800) 937-3253 Email:****************************Once the return request has been approved by Customer Service, a representative will supply a Return Material Authorization (RMA) number. The returned item must have the provided RMA number clearly marked on the outside packaging. Any item received without an RMA number clearly visible on the packaging will not be processed. An RMA number can only be provided by the Dake Customer Service team and must be obtained prior to the return shipment.The item must be shipped and received back to Dake within 30 days from being issued the RMA number, or the return will be void and nonreturnable.RefundsOnce the item has been received and inspected for damages, a representative will notify the requestor referencing the provided RMA number.If the return is approved, a refund will be issued to the original method of payment, less a 20% restocking fee. The restocking fee may be waived if an order is placed at the time of return with like-value merchandise.Transportation costs are the responsibility of the end user and will not be credited upon return approval. Any item that is returned after the initial 30 days or has excessive/obvious use will not be considered for a full refund.DAKE STANDARD TERMS & CONDITIONS OF SALE All proposals and quotations for the original sale of our products are subject to the following terms and conditions:ACCEPTANCE OF ORDER: All orders are subject to acceptance by Dake at its main office in Grand Haven, Michigan.APPLICABLE LAWS: This quotation or acceptance shall be governed in all respects by the laws of the State of Michigan.CANCELLATION: We reserve the right to cancel and/or refuse to complete your order if, in our opinion, you have not established credit to promptly meet the payment terms of your order. Any cancellation from the Purchaser may be subject to a 10% cancellation fee for any of our standard machinery and/or component parts upon the discretion of Dake. All non-standard or special quotes will not be eligible for cancellation, nor returns.DELIVERY: The proposed shipment date is an estimate and is contingent upon causes beyond Dake’s control. Under no circumstances shall Dake have any liability for loss of use or for any direct or consequential damages resulting from delay. All shipments from the Dake facilities are F.O.B.FREIGHT CLAIM: Lost or damage freight claims must be submitted to Dake within thirty (30) days of shipment from Dake’s facility. If shipment for order was set up by the Purchaser, Dake is not liable to handle the freight claims.PERMITS AND COMPLIANCE: Dake shall not be responsible for obtaining any permits, inspections, certifications, or licenses required for the installation or use of the equipment. Dake makes no promise or representation that the equipment or any services to be furnished by Dake will conform to any federal, state, or local laws, ordinances, regulations, codes or standards.PRICES: Unless otherwise agreed to in writing, all prices are F.O.B. from our plants in Grand Haven, Michigan, Grand Prairie, Texas, and Riverside, CA. In any event, the quoted prices for component parts become invalid ten (10) days after date of quotation, and machinery may become invalid sixty (60) days after date of quotation. Unless otherwise specified in Dake’s quotation, installation services and final on-site adjustments are not included in the quotation.TAXES: Prices do not include taxes. If any sales, use or similar tax is payable to Dake in connection with any transaction or part thereof between the Purchaser and Dake with respect to goods delivered, the Purchaser will, upon demand, pay to Dake the amount of any such tax. If you are tax exempt, please include your exemption document when submitting your order.TERMS OF PAYMENT: Terms of payment are as stated in Dake’s quotation subject to credit approval by our home office. Dake will invoice Purchaser when the equipment is completed and ready for shipment. Payment terms run from invoice date. Purchaser may be required to issue a down payment before production of order, at the discretion of Dake Accounting. For credit card purchases, a 2% processing fee may be applicable to the order. The following states are exempt from the 2% processing fee: CA, CO, KS, OK, TX, FL, NY, CT, MA, and ME.WARRANTY: If, within a period of one (1) year from date of shipment of the original order, any part of any equipment sold by Dake is defective in material or workmanship and is so found after inspection by Dake, it will be replaced or repaired at the option of Dake, providing the equipment has been given normal and proper usage and is still the property of the original Purchaser. Purchased components such as Micro Drop mist system or the like, installed as a part of Dake equipment are warranted only to the extent of the original Manufacturer’s warranty. Dake is not responsible for any service work performed unless authorized in advance.THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN, ORAL, OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE). UNDER NO CIRCUMSTANCES SHALL DAKE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.SPECIFICATIONSModel 4M Largest arbor 5-1/4” Number 902006 Capacity over table 26” Capacity 5 tons Capacity over table plate 24-1/2” Leverage ration 55:1 Base length21-1/2” Ram size2 x 2 x 23” Base width24” Max diameter work 20” Height 58” Throat 10” Weight1045 lbsSAFETYThis is the safety alert symbol. When you see this symbol on your press be alert to the potential for personal injury.Employer is responsible to perform a hazard/PPE assessment before work activity.Follow recommended precautions and safe operating practices. Carefully read all safetymessages in theseinstructions and on yourpress safety signs.Keepsafety labels in goodcondition. Replace missing ordamaged safety labels.This machine is intended tobe operated by one person.This person should beconscious of the press rammovement not only forthemselves but also forpersons in the immediatearea of the machine.Under no circumstancesincrease the leverage ratioof the press by using alonger handle or by placinga pipe over the handle.Never hammer on top of theram.HANDLE POSITIONCAUTION: NEVER PULL THE PRESS HANDLE PAST THE HORIZONTAL POSITION!To avoid personal injury and damaging the press only pull until the handle is horizontal, then return the handle back up as far as it allows before bringing the handle back down. This ensures that the pawl fully engages with the gear teeth to prevent tooth damage and gear slippage that can cause harm to the machine and worker. Examples above show the ideal minimum and maximum handle positions.OPERATIONHandwheel: The handwheel (item 15) can be turned to raise or lower the ram to and from the workpiece without exerting force on the workpiece.Handle: The handle (item 23) can be used to lower the ram to exert force onto the workpiece. See safety instructions for more information on handle position.MAINTENANCELUBRICATION•Keep all working parts of the press well-oiled for easier operation.•Keep a light film of oil over the entire surface of the ram to prevent rust.EXPLODED VIEW & PARTS LIST EXPLODED PARTS VIEWPARTS LISTItem Part Name Part Number Qty1 Frame 295 12 Mandrel Catcher 254 13 Table Pinion 271 14 Table Pinion Shaft 291 15 Table Crank 270 16 Table Pawl Handle 266 17 Table Pawl Shaft 287 18 Table Pawl 265 19 Spring (1/2” x 2”) 302436 110 Table Plate Assembly 701227 111 Hex Cap Screw (1/2”-13 x 1-3/4”) 43350 412 Label – Made in U.S.A. 76936 113 Ram Cap 296 114 Ram Cap Shim (.015”) 252 615 Handwheel 257 116 Ram Cap Shim (.008”) 251 217 Hex Cap Screw (3/8”-16 x 2”) 43333 118 Ram 253 119 Table 262 120 Hand Brake Stud 223A 121 Handbrake Clamp 215 122 Handbrake 214 223 Handle 283 124 Hex Jam Nut (1/2”-13) 43940 125 Flat Washer (1/2”) 43634 126 Compound Rest Pin 280 127 Headless Set Screw (1/2”-13 x 1-1/2”) 43608 128 Pawl 297 129 Spindle 256 130 Table Stud 282 231 Table Washer 279 232 Table Spring 281 233 Hex Cap Screw 53759 234 Table Clamp 267 135 Hex Nut (1-8) 43922 236 Headless Set Screw (3/8”-16 x 5/8”) 43589 437 Lever Weight 258 138 Pawl Pin 255 139 Retaining Ring 67955 140 Warning Label – Pinch Point 87130 141 Warning Label – Tipping 79979 142 Warning Label – Ganged 300168 1Please contact factory for current prices.ORDERING INFORMATIONParts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.。
储能电池系统产品手册BATTERY SYSTEM PRODUCTS AND SOLUTIONS************以电池安全为中心，守护储能系统科列技术成立于2010年3月，总部位于深圳市南山区高新技术产业园，股票代码：832432，是集BMS研发、制造、销售和服务于一体的第三方电池管理系统领军企业，国内首家开发并批量应用双向主动均衡技术，产品通过了IATF16949汽车级质量管理体系认证和ISO26262功能安全标准认证，获得了硬件、软件、数据算法等专利50余项。
设立深圳、上海、南京三大运营中心，拥有一支涵盖产品研发、工程设计、测试标定等领域的强大研发团队，具有多年电池管理系统研发和储能技术应用经验，产品可靠性高，产业化运作成熟，在纯电动大巴、纯电动汽车和电力储能领域等具有广泛应用，出货量超过百万套，覆盖全国并批量出口欧洲等世界各地。
南京科列电气技术有限公司，是科列技术的子公司，专注于电力储能产品的研发、设计、制造、销售和服务，提供锂电池储能核心BMS设备、电池系统及充放电设备、电池评价及标定测试服务、储能系统一体化解决方案，应用于风光新能源电站消纳、电力调峰调频及辅助服务、用户侧削峰填谷、微电网等各种场景，满足工商业和大中型储能电站的需求。
公司介绍COMPANY INTRODUCTION科列建立了国内领先、具备国际水平的电池系统标定测试平台，实现对单体电池、BMS HIL 以及电池系统进行充分的测试标定，能够在开发、生产过程中发现并解决潜在的诸多问题，同时基于标定数据制定合理的电池管理策略，提高系统的性能，降低故障率。
通过全工况电池系统的标定、精准的电池模型和SOX算法设计，使电池系统的可用容量提升10%，提高了整个系统的安全性、可靠性和经济性。
三、高精度SOX技术四、预标定/在线自标定技术0403困难与挑战核心技术科列电池管理系统基于ISO26262功能安全流程进行开发，采用汽车级芯片，软件采用AUTOSAR架构。
科大国创竞争力的产品-概述说明以及解释1.引言1.1 概述科大国创是一个具有强大竞争力的公司，其产品在市场上占据着重要的地位。
本文将就科大国创竞争力的产品进行深入探讨。
科大国创作为一家高科技企业，一直以来致力于创新和研发领域，成果丰硕。
其产品涵盖了多个领域，包括但不限于电子设备、通信技术、医疗器械等。
这些产品不仅在国内市场有着广泛的应用，也在国际市场上获得了良好的口碑和市场份额。
首先，科大国创的产品具有高质量和可靠性。
公司在产品设计和制造过程中，采用了严格的质量控制标准，确保产品的稳定性和可靠性。
这使得科大国创的产品能够在各个行业中得到广泛认可，并受到用户的信赖。
其次，科大国创的产品在技术上处于领先地位。
公司注重科技创新，并投入大量资源进行研发，不断突破技术难题。
这使得科大国创的产品在性能、功能和应用上都拥有很大的优势。
其先进的技术为用户提供了更加便捷和高效的解决方案，满足了市场的需求。
另外，科大国创的产品还具有良好的用户体验。
公司注重用户需求的研究与理解，致力于提供用户友好的设计和操作界面。
通过人性化的设计，使得科大国创的产品简单易用，提高了用户的满意度和体验感。
总的来说，科大国创的竞争力产品以其高质量、领先的技术和良好的用户体验，赢得了市场的认可和用户的青睐。
未来，科大国创将继续保持创新精神，进一步提升产品竞争力，为用户提供更加优质的产品和服务。
1.2 文章结构文章结构部分：为了更好地探讨科大国创的竞争力产品，本文将分为引言、正文和结论三个部分进行阐述。
具体结构如下：引言部分将会对整篇文章进行一个概述，介绍科大国创作为一家公司或组织的背景和重要性。
同时，我们还会说明本文的目的，即通过分析科大国创的竞争力产品，帮助读者更好地了解和认识这家公司。
正文部分将重点关注科大国创竞争力的产品。
我们将提出两个要点，分别介绍这些产品的特点和优势。
每个要点将会详细讲述科大国创在该领域的产品创新、技术研发以及市场竞争力等方面的表现。
Enterprise Development专业品质权威Analysis Report企业发展分析报告宁波新列电子科技有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:宁波新列电子科技有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分宁波新列电子科技有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。
该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。
1.2 企业画像类别内容行业空资质空产品服务：电子专用材料研发；科普宣传服务；科技中介1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.4行政处罚-工商局4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.11产品抽查-工商局4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。
新能源汽车行业公司及其产品BELLFAR 贝尔法（中国）汽车科技有限公司 1992年 高端汽车安全识别与智能操作系统▪ 汽车怠速启停控制系统-节油10%至25%深圳市元正电气有限公司 2007 并数字逆变焊机、大功率新能源汽车充电机、交直流充电桩、BMS 电池管理系统、汽车应急电源、特种车辆应急电源深圳市沃特玛电池有限公司 2002年5月磷酸铁锂动力电池淄博国利新电源科技有限公司 非对称大动力电容电池（电动公交） 深圳普益电池科技有限公司 动力电池及产业链相关产品 上海卡耐新能源有限公司（CENAT ） • ▪ 新能源汽车大巴用锂电池 • ▪ 卡耐新能源电动汽车锂电池模块河北安耐哲新能源技术有限公司 太阳能储能电池组、大容量移动电源、车用动力电池组、矿用电池组等深圳炜业通蓄电池公司 阀控型全密封免维护铅酸蓄电池、蓄电池极板北京光宇国际集团 铅酸电池、锂电池。
锂电产品包括磷酸铁锂、锰酸锂、钴酸锂等各类型锂电池。
三门峡兴邦特种膜科技发展有限公司 • 磷酸铁锂汽车启动电池▪ PVDF-XB 隔膜上海积进自动化设备有限公司开关电源(9)隔离放大器(2)温度变送器(0)电流变送器(0)馈电隔离器( 镇江太极电动车电源有限公司“库轮”牌牵引用铅酸蓄电池 广东科列技术有限公司 锂电专用BMS 佛山市友义泰科技发展有限公司• 免维护铅酸蓄电池 • ▪ 江苏苏州ups 蓄电池厂家云腾蓄电池锦州海伯伦汽车电子有限公司( JHAE )2004年12月 • ▪ 直流无刷电机控制器 ▪ 交流异步电机控制器 深圳市亿薪源电池科技有限公司 电动车锂电池 超洋世兴（北京）科技有限公司电动堆高车充电插头插接器▪ 电动堆高车充电插头▪ 电动观光车充电插头SMH 充电插头▪ 电动车胶木充电插头 插接器批发▪ 电动车蓄电池连接器。
公司概况介绍六点一、公司背景我们公司是一家专注于科技创新的企业，始创于2005年。
公司总部位于中国，拥有全球范围的分支机构和合作伙伴，以及庞大的研发团队和销售团队。
多年来，我们致力于研发和推广创新的科技产品，以满足人们对高品质生活的需求。
二、公司使命我们的使命是通过创新科技，改善人们的生活品质。
我们坚信科技的力量可以推动社会进步，为人们创造更美好的未来。
因此，我们不断努力研发出更先进、更智能的产品，以满足人们日益增长的需求。
三、产品及服务我们公司主要提供的产品包括电子设备、智能家居、通信设备等。
我们的产品通过创新技术和设计，为用户带来更便捷、高效、智能的使用体验。
同时，我们也提供一流的售后服务，确保用户在使用过程中的满意度和便利性。
四、市场竞争力我们公司一直以来都保持着强大的市场竞争力。
我们不仅拥有先进的技术和创新的产品，还与众多合作伙伴建立了稳定的合作关系。
我们的产品在市场上享有良好的声誉和知名度，深受消费者的喜爱和信赖。
五、企业文化我们公司秉承开放、创新、合作的企业文化。
我们鼓励员工提出新的想法和创意，并提供良好的创新环境和培训机会。
我们致力于打造一个团结、和谐、充满活力的工作氛围，让每一位员工都能够充分发挥自己的才华和潜力。
六、未来发展我们公司将继续致力于科技创新，并不断推出更多创新产品。
我们将进一步加强与各界合作伙伴的合作，共同推动科技的发展和应用。
我们相信，通过不懈努力和创新，我们的公司将在未来取得更大的发展和成就。
通过以上六个方面的介绍，我们可以了解到我们公司的背景、使命、产品及服务、市场竞争力、企业文化和未来发展方向。
我们公司将始终以创新为核心，不断追求卓越，为用户提供更好的产品和服务。
我们相信，未来我们的公司将在科技行业中继续发光发热，为社会进步和人们的生活带来更多的惊喜和改变。
