k110说明书(中文)

SLA TE™10” Color Touch Screen Display R8001K1010INSTALLATION INSTRUCTIONSScan for more informationApplicationSLATE™ brings configurable safety and programmable logic together into one single platform. The platform can easilybe customized for almost any requirement or application–offering virtually limitless development opportunities with far less complexity.The R8001K1010 SLATE 10” Color Touch Screen Display provides users with the ability to create vivid application displays using web technology. The screen is web enabled and with the SLATE Web Editor tool creating screens is simple and easy.Features• Display screens are web pages served from SLATE Base Module• Integrated view of SLATE system• Standard Honeywell pages for Burner Control, Fuel Air Ratio, Limit and Base modulesSLATE™10” COLOR TOUCH SCREEN DISPLAY3 R8001K1010SpecificationsElectrical Ratings:Voltage and Frequency: 24 VAC, 50/60Hz; 24AC/DCEnvironmental RatingsAmbient Temperature:Operating: 32° F to 158° F (0° C to 70° C)Shipping: -40° F to 158° F (-40° C to 70° C)Humidity: 95% continuous, noncondensing.Dimensions: See Fig. 1.Weight: 4 lb 5 oz (1.5 Kg)Panel MountingThe display can be mounted through a cutout in the panel door, using four #4 thread-forming Plastite screws. See Fig. 3.For standard panel thicknesses of 0.060”–0.090” Honeywell recommends screw length of 3/8”. See Fig. 2 for hole spacing.Required ComponentsR8001A1001 SLATE Base ControllerPower Plug RecommendationsThe SLATE 10 inch color touch screen display will notcome with a power plug connector. The following are recommendations for the power connection. See Fig. 4 for plug locations.• 24VAC Wall Plug-in Transformer(Input Voltage: 120VAC, 60HZ – Output Voltage: 24VAC±5%). Honeywell p/n 32006131 or equivalent.• 18AWG wire• Plug-in connectors (or equivalent) NOT INCLUDED:–Phoenix - p/n 1757019–EBY Electro - p/n EB1508-02-500–Dinkle – p/n 2ESDV-02P–Molex – p/n 03953000024 32-00095—03SLATE ™ 10” COLOR TOUCH SCREEN DISPLAY 5R8001K1010Fig. 1.3/4Dimensions in in. (mm).Fig. 2. Mounting dimensions of color touch screen display in in. (mm).Fig. 3. Panel mounting of color touch screen display.Fig. 4. Touch screen display inputs.Note:SD card slot for future display firmware updates. Principal Technical FeaturesThe R8001K1010 color touch screen display provides a web-based user interface for viewing system status, and viewing, creating, or modifying configurations. Communications and NetworkingThe R8001K1010 color touch screen display interfaces directly with the SLATE system using a standard Ethernet connection, and can connect directly to the Base module or via an Ethernet switch.The R8001K1010 color touch screen display locates all base modules on an IP subnet using a subnet broadcast message, and once located allows users to select one to initiate a connection to that SLATE system.User Interface and TechnologyThe R8001K1010 color touch screen display is based on the Google Chrome™ browser and supports HTML5.A double tap on any web screen activates the Home, Back, and Help buttons, URL address bar, plus other controlsthat are normally hidden from view. Double tapping again deactivates these controls.6 32-00095—03InstallationWARNINGFire or Explosion Hazard Can cause severe injury,death, or property damage.Verification of safety requirements must be performedeach time a control is installed on a burner to preventpossible hazardous burner operation.When Installing This Product1. Read these instructions carefully. Failure to follow themcould damage the product or cause a hazardous condition.2. Check the ratings given in the instructions and on theproduct to make sure the product is suitable for yourapplication.WARNINGElectrical Shock Hazard.Can cause severe injury, death or equipment damage.1. Disconnect the power supply before beginning installationto prevent electrical shock and equipment damage. More than one power supply disconnect can be involved.2. Wiring must comply with all applicable codes, ordinancesand regulations.SLATE™10” COLOR TOUCH SCREEN DISPLAY7 R8001K1010Honeywell Process SolutionsHoneywell Thermal Solutions (HTS)1250 West Sam Houston ParkwaySouth Houston, TX 77042ThermalSolutions.honeywell ® U.S. Registered Trademark. © 2018 Honeywell International Inc. 32-00095—03 M.S. 05-18 Printed in U.S.A.For more information and detailed instructions on the SLATEdisplay please refer to the SLATE User Guide document located on our website at /SLATE32-00095-03IMPORTANT1. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause interference for radio communications. It has been tested and found to comply with the limits of a ClassA computing device of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area may cause interference; in which case, the user, at their own expense, may be required to take whatever measures are required to correct this interference.2. This digital apparatus does not exceed the Class A limits for radio noise, set out in the Radio Interference Regulations of the Canadian Department of Communications.WARNINGElectrical Shock Hazard. Can cause severe injury, death or equipment damage.Disconnect the power supply from the main disconnectbefore beginning installation to prevent electrical shockand equipment damage. More than one disconnect can be required.。

该遥控器设置参数均在上图内完成，整体菜单采用分层结构，层次分明，操作简便，整体LED显示分为
1） 开机基本显示，单线框对应通道表示区，用于参数设置时进行通道指示。

3） 直升机模式显示
4） 固定翼模式显示
7 遥控器待机状态
将遥控器各个开关置于常态位置（开关位置拨向遥控器后盖），打开遥控器进
入待机状态，LED显示为当前模式飞行参数及相关信息。

可分类为固定翼
调参 直升机调参 高级调参数及特殊功能。

遥控器待机状态下按mode键1-2秒进入常用参数调整。

遥控器待机状态下按MODE键加BACK键1-2秒进入高级参数调整。

功能：通道正反向设置
大小舵量设置
EXP曲线设定
油门曲线设定
MIXES通道混控设定（三角翼混控 V型尾翼混控 襟副翼混控）
功能：通道正反向设置
大小舵量设置
EXP曲线设定
油门曲线设定（一般油门 3D油门）
螺距曲线设定（一般螺距 3D螺距）
陀螺仪参数设置
功能：模组设置（可选择10组模组）
模型选择（直升机固定翼）
CCPM混控模式选择（直升机专用）
舵机中点设置
操控模式设置（MODE1/MODE2)
大小舵量指示数字量化显示
微调状态
3
道数字与量化模块 闪动，其他通道隐藏
阻尼调节螺丝
弹簧压制螺丝
弹簧手感调节
字与量化模块 闪动，其他通道隐藏。