博朗6系 说明书

thermometerQuick-start GuidePress the FACE button and keep holding it down whilst approaching the centre of the forehead until you see the temperature displayed inside the rectangle.Too FarToo closeCorrect distanceIf, when pressing the “face” button, the projection shows CAL (“face” and “home” lights will flash), press the “face” and “home” buttons simultaneously and direct the projection onto an internal wall or another hard surface. Release the buttons. Now the device is calibrated to the room temperature and ready to take accurate body temperature measurements when pressing the “face” button.To take temperature of objects, walls etc., press the “home” button.The 6-in-1 Thermometer is an infrared thermometer,Therefore, when the “face” button is pressed, the 6-in-1 Thermometer software automatically applies a correction factor and thus the resulting value is comparable to that experienced in more commonly used temperature-taking methods, such as underarm (axillary), oral or rectal, or other core temperature locations as preferred by the user..An oral reading is generally 0.2°C (0.4°F) higher than an axillary reading while a rectal or core reading is usually0.8°C (1°F) higher (see no.7).The 6-in-1 Thermometer temperature reading taken on thetemperature reading for them.4. HOW TO USE4.1 Taking the body temperature: FOREHEAD• When using for the first time, insert 4 AAA batteries as explained in no.11 Replacing batteries.• Open the protective cap by rotating it 90° (see fig. 2).• Point the 6-in-1 Thermometer at the forehead.• Press the “face” button and hold it down. The two aiming lights will turn on and you will see the temperature reading projected onto the forehead between or overlapping the sides of the projected rectangle shape. • While keeping the 6-in-1 Thermometer perpendicular to the centre of the forehead, move it back or forth until the temperature reading is positioned evenly inside the rectangle (see fig. 2): if the thermometer is too close, or too far away, the temperature reading will overlap the sides of the rectangle (see figs. 3 and 4).• When the temperature reading sits evenly inside the rectangle, the thermometer is at the correct distance (see fig. 5); release the button, keep the thermometer steady while the projection flashes and then read the temperature value.If necessary, you can immediately take another reading. After the measurement has been taken, the light on the(recommended for professional use only).Proceed as you would do for a forehead reading (see no.4.1), but press the “home” button : the projected reading will appear on the surface.After the measurement, the projection of the temperature value will remain visible for about 10 seconds. If it is difficult to see the temperature value (for example, on transparent, shiny or irregular surfaces, such as bathwater or soup) then release the button and direct the projection onto a solid, preferably dark, surface. This time you will not need to worry about holding the thermometer the correct distance from the surface as, in this case, the thermometer is not taking a temperature, but merely projecting the temperature value that has already been taken.5. AMBIENT TEMPERATURE and MEMORY FUNCTION The “Mem” button lets you see the ambient temperature and call up the last 9 temperature readings (memory function).• Aim the device at any uniform and opaque surface.• Press once the “Mem” button: the projection will show the letter “A” , (Ambient) alternating with the ambient temperature value, and the light of the “Mem” b utton will turn itself on.• Press the “Mem” button again, and the projection will show the number 1 alternating with the last temperature value taken. The light of the button which had been used for that measurement (“face” or “home”) will turn itself on. If you push the button again before the memory’s light turns itself off, the number 2, alternating with the second to last temperature taken will be projected, and the light of the used button will turn itself on, and so on.6. ROOM TEMPERATURE CALIBRATIONIf, when pressing the “face” button, the projection shows “CAL” , (“face” and “home” lights will flash) this means the device needs to be stabilised (see no.2.1.2).In this instance, the thermometer will not let you take a measurement, as it would not be correct. On the contrary, it will activate the Automatic Quick Calibration System (AQCS). Now you have two possibilities:1. Wait about 5 minutes without touching the thermometer, until the AQCS ends.2. Perform the MQCS (Manual Quick Calibration System) procedure as follows:focus the thermometer on an internal wall or wardrobe with uniform temperature and at a point between approximately between 80 and 150 cm (30 and 60 inches) from the surface press the “face” and “home” button simultaneously (see fig. 8) (lights will flash).• once the correct distance is reached (CAL inside the rectangle, fig. 5), release the button: the projection will flash slowly showing the room temperature.To ensure a reliable temperature reading, do not focus the thermometer on an outside wall, window, source of heat or cold (radiator, air conditioner, lamp, computer, surface in contact with the human body, etc.).The thermometer is now ready to take a reading and willIf necessary, these settings can be changed as follows: • when the thermometer is off, aim the thermometer at any flat surface.• press and hold the “Mem” button; the projection will show the letter “A” and after about 8 seconds it will change, showing the settings in sequence:…..C...…….F……..Or…….rEc……..Ax…….Cor…• when the desired setting appears, release the button.appears.DESCRIPTION: “E.1” is projected alternately withthe symbol “bAt” ( ),or the unit does not turn on at all.PROBLEM: the batteries are dead. SOLUTION: remove thebatteries immediately and replace them (see no. 11).DESCRIPTION: the projection reads "E.8". PROBLEM: the thermometer was moved before the light started flashing, or the area is subject to strong electromagnetic fields. SOLUTION: wait until the light starts to flash before moving the thermometer; make certain that there are no mobile or cordless telephones in the vicinityDESCRIPTION: the projection shows “CAL” and the lights of the “face” and the “home” buttons flash. PROBLEM: the thermometer has not stabilised. The symbol “CAL” and the lights indicate that you should perform an MQCS. SOLUTION: perform an MQCS (see no. 6).DESCRIPTION: "Hi.4" not guaranteed. DESCRIPTION: "Hi.4" appears on the projection. PROBLEM: the room temperature is too high(above 45°C / 113°F).SOLUTION: move toanother, cooler site.DESCRIPTION: “Lo.5"and the temperature valueare projected alternately.PROBLEM: If you havepressed the “face” button:the room temperature isbetween 10 and 15.9°C(50 and 60.6ºF).If you have pressed the“home” button”: the room temperature is between 5and 9.9°C (41 andDESCRIPTION: the projection reads PROBLEM: the room temperature is too low (below 10°C or 50°F if you habutton ORbelow 5°C or 41°F if you habutton.SOLUTION: move to another, warmer room. DESCRIPTION: "Hi.2" and the value are projected alternately. PROBLEM: if you have pressed the “face” button: the temperature is over 40°C/104°F. SOLUTION: seek medical attention. DESCRIPTION: the projection reads "Hi.2". PROBLEM: if you’ve pressed the “face” button: the temperature detected exceeds the limit for operation with this button (>42,5°C or >108.5ºF ).If you’ve pressed the “home” button: the temperature detected exceeds the limit for operation with this button (>80°C or >176°F ). SOLUTION: temperature reading cannot be taken. DESCRIPTION: the projection reads “Lo.3”. PROBLEM: the forehead temperature appears to be too low (<34.0°C or<93.2°F if you have pressed the “face” button OR <1°C/33.8°F if you’ve pressed the “home” button).SOLUTION: if you have pressed the “face” button: make certain the sensor is not dirty or damaged and that the subject has not come from a cold room.If you have pressed the “home” button: the temperature readingcompliance with IEC 62471.Follow instructions for useATTENTION: read thewarningsDevice designed for continuous useApplied part: type BFProtected against insertion of objects >12.5 mm andagainst vertical drippingwater when tilted up to 15°.Recyclable materialDispose of the device incompliance with applicablelegislation regarding electrical equipment andbatteries.Brother Max 6-in-1 ThermometerUS 6,196,714 - US 6,527,439 - US 7,001,066 - US 7,651,266 - US 8,128,280 - EP0909377 -EP1051600B1 - EP1283983B10051Manufactured in Italy by TECNIMED srl 12, P.le Cocchi , 21040 Vedano O. (VA) - ITALY****************Tel. +39 0332 402350。

医生及妈妈们心目中最理想的品牌!最多医生诊所及妈妈推荐，比以前更温和!美国几乎所有的儿科医生都用博朗体温计，目前国内使用博朗4520的医院有上海红房子和瑞金,杭州儿童医院等等.德国博朗4520耳温计是BRAUN系列产品的最高端型号一秒体温计，人体工程学外型,把握更加舒适.全新护耳柔垫设计，更小的测量口径，柔软有温和，更适合婴幼儿，更能保健全家健康。

舒适、适合全家大小使用，最温和的体温测量工具；安全、全新设计柔软侦侧头，安全不伤耳道；快速测量体温，仅需一秒；准确经医院使用测试证明，测温准确.德国博朗4520耳温计是BRAUN系列产品的最高端型号一秒体温计，人体工程学外型,把握更加舒适.全新护耳柔垫设计，更小的测量口径，柔软有温和，更适合婴幼儿，更能保健全家健康。

舒适适合全家大小使用，最温和的体温测量工具；安全全新设计柔软侦侧头，安全不伤耳道；快速测量体温，仅需一秒；准确经医院使用测试证明，测温准确.初生的宝宝发烧了,量体温是年轻父母最头疼的事,因为一般的耳温计测量时间长,宝宝常常”不合作”.现在好了,德国博朗”一秒耳温计”,只需往宝宝耳朵里一放,一秒钟不到,温度多少立刻精确显示,不论躺着还是坐着都可以用,孩子无痛苦！-一秒八次测温，耳套检测警示-Flexible tip(4000系列独有)柔软弹性探头-更小测量口径，测量更准确-耳套自动弹出装置-贴心凸纹按钮设计，测量不滑手-保留前8次温度记忆-ExacTemp技术(4000系列独有)配合回馈系统:有指示灯光和声音提示测得正确温度,提示是否没有正确放置.-使用时间更长1.产品包装中都有哪些东西打开包装产品共有3样东西：一个硬盒保护安放支架+送的21个耳套+耳温计一个2.产品所用电池说明刚买的产品中含有电池，但是电量不是很足，可以用1-2个月，建议1-2月后换电池，电池是5号电池。

3.几个按键说明I/O：按一下开机，长按就是关start：测量前按一下，灯会闪烁，表示进入测量的状态了。

BURAN博朗系列超细干粉自动灭火装置使用说明书南京燕苑博朗消防设备有限公司1目录悬挂式超细干粉灭火装置 FZXA2.5-BURAN第一部分保管注意事项结构和工作原理 4 运输、1 适用范围 2 技术性能 3售后服务装箱单 8 安装注意事项5 6 维护注意事项 7FZXA5-BURAN 第二部分悬挂式超细干粉灭火装置保管注意事项 4 技术性能 3 结构和工作原理运输、1 适用范围 2售后服务维护注意事项 7 装箱单 8 5 安装注意事项 6FZXA8-BURAN 悬挂式超细干粉灭火装置第三部分运输、保管注意事项适用范围 2 技术性能 3 结构和工作原理 4 18 维护注意事项 7 装箱单售后服务 6 5 安装注意事项自动温感启动器第四部分手动启动功能模块主要技术指标概述1 2 探测器性能特点 3 4 安装方法 6 使用方法维护5安装注意事项第五部分备注第六部分2第一部分 FZXA2.5-BURAN悬挂式超细干粉灭火装置1 适用范围1.1 能迅速扑灭A、B、C类火灾和带电电气火灾。

如生产车间、办公室、小型仓库、商店、配电房等层高比较小的相对封闭空间及火车、船舶等交通工具消防使用。

1.2 防爆标志ExibIIBT32 技术性能2.1 外形尺寸（含固定架；mm）直径……………………………………200±5高度……………………………………375±52.2 灭火装置重量（Kg）………………………………………………………6.0±0.52.3 灭火超细干粉重量（Kg）…………………………………………………2.5±0.1252.4保护面积、体积（不密闭程度5%）A类火灾B、C、E类火灾保护面积保护体积保护体积保护面积3223mm mm1887292.5自动温感启动器启动温度（℃）…………………………………………≥702.6启动电流（A）………………………………………………………………≥12.7 检查电启动的安全电流（mA）…………………………………………≤1502.8 喷射时间（秒）………………………………………………………………≤52.9 灭火时间（秒）……………………………………………………………≤12.10 使用环境温度（℃）………………………………………………－40～＋502.11 装置启动有效期（年） (10)2.12 可人控电启动或与火灾自动报警系统配套使用。

博朗IRT6520中文说明书家用版一、产品概述博朗 IRT6520 是一款高性能的家用体温计，它采用了先进的红外线技术，能够快速、准确地测量人体体温。

无论是成人还是儿童，都能方便地使用这款体温计进行体温监测。

二、产品特点1、快速测量只需几秒钟，就能获得准确的体温测量结果，节省您的时间。

2、高精度采用先进的传感器和算法，确保测量结果的准确性和可靠性。

3、多功能显示屏幕清晰显示测量结果，同时还会显示上次测量的体温，方便对比。

4、适合不同人群可用于测量儿童和成人的额头、耳部体温，满足家庭中不同成员的需求。

5、易于操作简单的按钮设计，让您轻松上手，无需复杂的操作步骤。

三、产品组成1、体温计主体这是测量体温的核心部分，包含了传感器、显示屏和操作按钮。

2、保护套用于保护体温计，防止在不使用时受到损坏。

3、电池为体温计提供电源，确保其正常工作。

四、使用方法1、准备工作取出体温计，确保其外观完好无损。

安装电池，按照电池仓内的正负极指示进行安装。

2、测量额头体温按下电源按钮，启动体温计。

将体温计的探头对准额头，距离约 3 5 厘米。

按下测量按钮，体温计会发出“哔哔”声，表示测量开始。

几秒钟后，体温计会显示测量结果。

3、测量耳部体温轻轻向外拉耳朵，使耳道伸直。

将体温计的探头插入耳道，确保探头与耳道紧密贴合。

按下测量按钮，等待测量结果。

五、注意事项1、在测量体温前，应确保被测量者处于安静状态，避免剧烈运动、进食或喝热饮等。

2、测量额头体温时，应避免头发、汗水或化妆品的干扰。

3、测量耳部体温时，要注意清洁耳道，防止耳垢影响测量结果。

4、如果测量结果异常，建议多次测量以确认。

5、请勿将体温计暴露在高温、潮湿或强磁场环境中。

6、当体温计显示屏显示电量不足时，请及时更换电池。

六、清洁与保养1、每次使用后，用干净的软布轻轻擦拭体温计的探头和机身。

2、如探头有污垢，可用棉签蘸少许酒精轻轻擦拭。

3、请勿将体温计浸泡在水中或用湿布擦拭电池仓。

博朗IRT6520中文说明书家用版博朗irt6500/6520/6020中文说明书产品描述1——耳套(20个/盒)2——位置探测器3——测温头4——exactemp指示灯5——更换耳套按钮6——显示屏年龄选择及记忆功能按钮8——电源键9——测温键10——电池盖11——保护盒博朗耳温计适用于所有年龄人群的体温测量和监控。

仅供家庭使用。

注意事项:若出现未明原因的焦躁、呕吐、腹泻、脱水、食欲不振或活动不适、痉挛、肌肉疼痛、发抖、脖颈酸痛、排尿疼痛等症状,不管背景指示灯亮起何种颜色、被测温者是否发烧,均请咨询医生。

若耳温计显示温度升高(irt6520型号的背景指示灯变黄或变红),请咨询医生。

本产品工作环境的温度范围为:10-40℃(50-104℉)。

切勿将本产品暴露于极限温度(50℃/122℉),切勿置于过湿环境中(>95%rh)。

本产品必须与博朗耳温计配套的耳套(lf40)使用。

儿童在服用抗生素、止痛剂或退烧药的情况下,不应仅靠体温计读数来判定其病症严重程度。

耳温计指示的温度升高可能是病情严重的信号,尤其是出现在年老衰弱、免疫力低下者或婴幼儿身上时。

当出现温度升高或当您对下列人员进行测温时,请立即接受专业咨询。

①出生3个月以下的婴儿(若温度超过37.4℃或99.4℉,请立即咨询医生);②60岁以上的病人;③糖尿病患者或免疫力低下人群;④卧床病人;⑤器官移植者;⑥发烧的症状在老年病人身上较难甚至无法发现。

本产品包含小零件,或被儿童吞食引发窒息危险。

请将本产品置于儿童接触不到的地方。

博朗耳温计使用方法1、摘掉防护盖、按电源键内部自测时,显示屏显示全部过程。

最后一次测得的温度将在显示屏显示5秒钟。

3、如果有需要,耳套指示灯将闪烁。

为获得精确读数,请确保每次测量前换上新的或干净的耳套。

将耳温计探测头插入盒子中断耳套后拔出,新的耳套便戴在探测头上。

请注意:博朗耳温计戴上耳套才能工作。

4、利用agesmart年龄选择功能按钮选择年龄,如下图所示。

保留这些说明我们产品设计符合最高质量标准，功效和设计。

我们期望您喜爱新博朗剃须刀。

本产品仅限于家用。

描述1.箔刀盒2.箔刀盒释放按钮3.剃须刀头锁动开关4.弹出式鬓角修剪器5.开关6.设置按钮（敏感度）7.设置按钮（密集度）8.复位按钮9.剃须刀显示器10.剃须刀电源插口11.旅行盒12.专用电源线充电推荐充电环境温度为41华氏度到95华氏度或5摄氏度到35摄氏度。

极端低温或高温条件下，电池可能无法正常或完全充电。

推荐剃须环境温度为60华氏度到95华氏度或15摄氏度到35摄氏度。

为了延长使用时间，不要将剃须刀暴露在温度高于50摄氏度或122华氏度环境下。

·使用电源线连接剃须刀至电源插座充电最少一小时。

·一次充满电可提供高达50分钟无绳剃须，这可能会依据你胡须生长改变。

剃须刀显示器剃须刀显示器显示电池充电状态。

在充电过程中或使用剃须刀时，对应绿色充电状态会闪烁。

当电池充满电绿色充电状态将连续点亮。

在完成充电几分钟后，剃须刀切换到待机模式：显示关闭当剃须刀打开，电池电量不足时，红色指示灯闪烁。

剩下电量还将足够用于2到3个剃须。

使用你剃须刀个性化你剃须刀使用（—）⑥和（+）⑦按钮，你能够为你脸不一样部位和特定需求选择最好设置。

不一样设置经过开关键⑤结合指示灯指示·深蓝色（强力剃须）·浅蓝色（通常）·白色（为你脸敏感地域进行一个根本舒适剃须，如颈部）为根本快速剃须我们推荐（+）设定。

当下次切换时候，上次使用设置将被激活。

完美干剃小贴士为了取得最好剃须效果，博朗提议您遵照3个简单步骤：1.一直洗脸之前刮胡子2.在任何时候，保持剃须刀垂直于你皮肤3.绷紧你皮肤，逆着胡须生长方向刮怎样使用按开关键⑤来操作剃须刀·旋转剃须刀头和自动浮动箔，调整到适应你脸轮廓每个部分。

·剃部分难剃地方（比如鼻下），以一定角度滑动剃须刀头锁定开关③到后面位置去锁定旋转头。

en Operating instructions arليغشتلا تاداشرإ* Model dependent* Model dependent EasyComfort for simple, fast and safe ironing.Discover the new way of ironing with EasyComfort – no more changing the temperature of the iron and tedious pre-sorting! Now all ironable materials, from ultra fine delicates to extra thick fabrics, are creasefree in a flash with a single temperature setting. Which means more time to do other things.1. “on / off” button with indicator light2. “Calc'nClean” descaling button with indicator light3. “Water tank empty” button with indicator light4. Energy saving “Eco” button with indicator light5. Steam hose6. Mains cable7. Mains cable and steam hose storage holder8. Boiler cap / “Calc’nClean” scale collector *9. Water tank 10. Level mark for maximum filling 11. Filling lid 12. Iron pad 13. Iron lock system “SecureLock” *14. Steam release button 15. Iron indicator light 16. Soleplate 17. “Calc'nClean” container *2x* Model dependent* Model dependent 1 Press the steam release button (14) for ironing with steam.Important: When placing the iron on the pad, be sure to first insert the heel in the upper side of the control panel, as shown in the figure.Tip: For better ironing results, iron the last strokes withoutpressing the steam release button (14) to dry the garment.This appliance has a special function for tackling difficult creases.1 Press the steam release button (14) two times inquick succession (double-click). Powerful shots ofsteam will be released.Can be used to remove creases from hanging clothes, curtains, etc.1 Hold the iron in an upright position 15 cm away from the garment to be steamed.2 Press the steam release button (14) repeatedly with pauses of at least 5 seconds.Warning! : never point the steam jet at garments being worn, or at people or animals.If the energy saving setting is selected, you can save energy and water and still achieve good results when ironing most of your garments.1 Press the energy saving button “Eco” (4). The indicator light will come on.2 To switch back to the normal energy setting, press the “Eco” button again. It is advisable to use the normal energy setting to get optimum results on thick and very wrinkled fabrics.* Model dependent* Model dependent* Model dependent* Model dependentليدوملا بسح *ليدوملا بسح *ليدوملا بسح *ليدوملا بسح *2xليدوملا بسح *ليدوملا بسح *نايب ةبملب دوزم “فاقيإ/ليغشت“ رز .1“Calc’nClean“ ةيريجلا تابسرتلا ةلازإ رز .2نايب ةبملب دوزمنايب ةبملب دوزم “غرافلا ءاملا نازخ“ رز .3 ةبملب دوزم(يداصتقا) “Eco“ ةقاطلا ريفوت رز .4نايبراخبلا موطرخ.5 ءابرهكلا لباك .6راخبلا موطرخو ءابرهكلا لباك نيزخت تيبم .7 ةيريجلا تابسرتلا عمجم / ةيلاغلا ءاطغ .8* “Calc’nClean ”ءاملا نازخ.9 .ىصقلأا ءلملا ىوتسم ةملاع .10ءلملا ةحتف ءاطغ .11ةاوكملا ةداسو عضو .12 * “SecureLock“ ةاوكملا لفق نيمأت ماظن .13راخبلا قلاطإ رز.14ةاوكملل نايب ةبمل .15ةاوكملا ةدعاق .16"Calc’nClean" ءاعو .17.نامأو ةعرسو ةلوهس لكب يكلل EasyComfort ماظنةاوكملا ةرارح ةجرد رييغتل نلآا دعب ةجاح لا – EasyComfort ماظن عم يكلل ةديدج اقرط فشتكا سبلاملا عيمج حبصتس ةرارحلا ةجردل يداحلأا طبضلا عضو لضفبو !لمملا قبسملا زرفلل ءوجللا وأ ىلإ لاوصو ةقدلاو ةموعنلا ةقئاف ةساسحلا تاجوسنملا نم اءدب رصبلا حمل يف ةشمرك نودب يكلل ةلباقلا.ىرخلأا ماهملاب مايقلل تقولا نم ديزم ريفوت ينعي امم .ةكامسلا ةغلاب تاجوسنملاليدوملا بسح *Customer Service Great BritainBosch Customer ServiceGrand Union HouseOld Wolverton Road Milton Keynes MK12 5PT UK +44 (0)344 892 8979 IRL +353 (0)1450 2655 002 DS60 EasyComfort GB/AR 12/16 9001226329。

6 seriesQuick Start GuideRegister your product:/my-tv•Early access to exclusive offers and more!•Keep track of your product warranty coverage•Get easy access to product supportScan to registerUser manual:/supportFor a detailed manual, please visit oursupport page and enter your TV modelnumber to download.Scan to downloadCall us:1-833-978-3323To obtain assistance, contact Philips customercare center; In the U.S.A., Canada, Puerto Rico,or the U.S. Virgin IslandsScan to callChat with us:/y2e29xsqFor a detailed manual, please visit oursupport page and enter your TV modelnumber to download.Scan to chatFor additional support, please see online owner’s manual at /support Key things to know: A paid subscription or other payments may be required for some streaming channel content.Channel availability is subject to change and varies by country.2 Using the remoteHow to install the batteries in the remoteOpen the battery cover by firmly sliding down. Insert 2 AAA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote.12368495121371Power Turn TV on and off2Back Return to previous screen 3OKSelect an option from a menu4Instant replay Replay the last few seconds of streaming video5RWD scan Rewind streaming video, scroll left one page at a time6HomeReturn to Roku Home screen7Volume/Mute Increase/Decrease volume and mutes the TV sound8Directional keypad (D-Pad)Move up, down, left or right9SleepSet the sleep timer10Options A ccess to picture settings, move streaming channel icons andmore 11FWD scan F ast forward streaming video, scroll right one page at a time12Play/Pause Start or pause playback13Featured channel shortcut L ets you directly access featured channels* Thegives you easy access to picture settings, display options and more. Try it on every screen.3 Plug in and turn on TVConnect the AC power cord to the AC outlet. Press the power button on the TV’s remote.4 Follow the on-screen instructions1. Once your Roku TV powers on, follow the on-screen instructions. Your Roku TV will walk you through initial setup and help connect to your preferred wireless network.2. Your TV will automatically detect wireless networks in your area. Have your network name and password handy and follow the easy on-screen instructions.x If you are not ready to connect your TV to a wireless network, you can still use it as a regular TV by selecting “Connect to the Internet later”.3. Once connected your TV will automatically update with the latest software. This can take a few minutes to update. Once you complete guided setup, your TV will automatically update with the latest software. Your new Philips Roku TV automatically receives regular software updates in the background when it’s connected to the Internet. This allows it to give you a better experience over time.5 Activate your smart TVYou need a Roku account to activate your Roku TV and to access entertainment across thousands of streaming channels. Your Roku accountFollow the on-screen instructions on your Roku TV. You will need to activate your Roku TV using your smartphone, tablet, or computer to link to a Roku account. See more information below.•R oku accounts are free, and while a valid credit card number is not required to create your account, providing your credit card information makes renting and purchasing entertainment from the Roku Channel Store fast and convenient.•I f you choose to provide a payment method, you will be able to seamlessly rent content, download channels and subscribe to services without having to enter your credit card information each time.•A unique PIN can be added to the account to prevent unauthorized purchases.E Tip:Roku does not charge for activation support — beware of scams.C Caution:Funai Corporation, Inc. does not warrant access to the portal or to any of the services, content, software and advertising. Funai Corporation, Inc. may, in its sole discretion, add or remove access to any specific services, content, software and advertising at any time. Although Funai Corporation, Inc. will strive to provide a good selection of services, content or software, Funai Corporation, Inc. does not warrant continued access to any specific services, and content or software.6 Download the Roku mobile app (optional)The free Roku mobile app allows you to use your mobile device as a fully functioning remote with voice search and keyboard.• Download the Roku mobile app on your smartphone or tablet through Google Play or Apple App Store.• Simply search for “Roku app” and choose the “Roku” app provided by Roku Inc.• Follow the on-screen prompts and you are on your way.7 Connect antenna or cable (optional)With the tuner built-in you can connect your TV to antenna or cable (free cable only, does not work with cable TV using a set-top box) and enjoy over-the-air entertainment.Live TV tile 1. W hen the setup wizard is complete, select the Antenna TV tile from the home screen.2. F ollow the on-screen instructions.3. W henever you want to watch local broadcast TV, select this tile.• User interface may vary.E Tip:While in the antenna TV input, you can use your remote to access additional features.• D-Pad left: Pressing this key brings up the smart guide, a list of antenna TV channels.• Play/Pause: Pause live TV for up to 90 minutes when a 16 GB USB drive is connected.• RWD scan and FWD scan: Allows you to fast forward and rewind while using the Live TV Pause feature.• D-Pad left and right: Allows you to scroll through the paused Live TV and select scenes.•L ive TV Pause can pause content received on the antenna TV input for up to 90 minutes and requires a 16 GB or larger USB drive and a valid Roku account. All data on the USB drive will be deleted prior to use.8 Parental ControlsParental controls enable you to control whether the members of your household can view certain kinds of broadcast TV programs. When a program or feature is blocked, you can unblock it by entering a parental control PIN that only you know.C Note:Parental controls block content from the TV tuner and from streaming options, if any, on the Home screen menu.Parental controls do not block content on other TV inputs or content from streaming channels you add to your TV. Creating a parental control PINTo create a new parental control PIN, from the Home screen menu navigate to Settings > Parental controls. The screen displays a numeric keypad. Use the purple directional pad to enter a four-digit code, and then press OK. Then repeat the process to enter the same PIN again, just to make sure you correctly entered the PIN you want to use.C Important:If you forget your parental control PIN, the only way to recover is to perform a factory reset operation. Blocking broadcast TV programsEnabling parental control of TV programsThe first step in blocking TV programs is to enable parental control of TV programs.To enable parental control of TV programs:1. In the Home screen menu, navigate to Settings > Parental controls, and then enter your parental control PIN.2. In the Parental controls screen, navigate to TV tuner > Enable parental controls.3. Make sure the check box next to Enable parental controls is checked. If not, highlight it and press OK. Blocking based on US TV ratingsTo block TV programs based on US television ratings:1. From the Home screen menu, navigate to Settings > Parental controls, and then enter your parental control PIN.2. In the Parental controls screen, navigate to TV tuner > TV ratings. Choose among the following settings:x Entire ratings– Highlight the rating you want to block, and then navigate to the right and select the first option that blocks the entire rating level (and all higher rating levels).x Individual content types– Highlight the rating that contains the content type you want to block, and then select the content types you want to block from among those listed. Remember that blocking a content type in one rating blocks the equivalent content type in all higher rating levels.CopyrightAll other registered and unregistered trademarks are the property of their respective owners.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.Portions of this software are copyright © The FreeType Project ().The American Academy of Pediatrics discourages television viewing for children younger than two years of age.Some features may require an always-on broadband internet connection, firmware update and/or a minimum bandwidth. Internet services vary by location.This product has been manufactured by and is sold under the responsibility of Funai Corporation, Inc., and Funai Corporation, Inc. is the warrantor in relation to this product.9 TroubleshootingLicenseFunai Corporation, Inc. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source code packages, on an “AS IS” basis, used in this product for which such offer is requested by the respective licenses.This offer is valid up to three years after the product purchase to anyone in receipt of this information. To obtain source code, please contact Funai Corporation, Inc. You should write to Funai Service Corporation OSS Request, 2425 Spiegel Drive, Groveport, OH 43125, USA. Funai Corporation, Inc. disclaims any and all warranties and representations with respect to such software and related source code including quality, reliability, usability, and accuracy, and further disclaim all express, implied, statutory or otherwise, including without limitation, any implied warranties of title, non-infringement, merchantability, or fitness for a particular purpose. Funai Corporation, Inc. shall not be liable to make any corrections to the open source software or source code or to provide any support or assistance with respect to it. Funai Corporation, Inc. disclaims any and all liability arising out of or in connection with the use of this software and/or source code.Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.ROKU, ROKU TV and the ROKU logo are the trademarks or registered trademarks of Roku, Inc.All other trademarks and logos herein are the property of their respective owners.。

博朗产品说明书博朗耳温枪针对位于耳朵的准确、安全、快速的温度测量已经高度成熟。

温度计探针的形状设计防止其深入耳孔太深碰伤耳膜。

但是与所有温度计一样，正确的使用方法是获得准确温度的关键。

因此请仔细透彻的阅读此使用说明。

重点●温度计操作的外界温度范围是10-40℃（50-104℉)。

●温度计既不可置于其温度极限（低于-20℃/-4℉或者超过50℃/122℉)也不可超过其最大湿度（>95%RH)。

●此温度计必须只能使用博朗原装热扫描镜片过滤器（LF40）●经常使用此温度计要附带一个新的、干净的镜片过滤器，以避免不准确测量。

●如果温度计只是偶尔使用无附带的镜片过滤器，清洗镜片（请查阅“保养与清洗”）●请勿让小孩接触镜片过滤器。

●此温度计只针对家庭使用。

●此温度计的使用并不能替代医生咨询。

博朗热扫描仪是如何工作的？博朗耳温枪测量由耳膜和周边组织产生的红外线热度。

探头被加热到接近于人体温度，有助于避免不准确的温度测量。

当博朗热扫描仪放入耳朵中，它持续监测红外线能量。

当温度计探测到一个准确的温度测量已被获取，测量结束结果被显示出来。

为什么在耳朵中测量？温度测量的目的是去测量生命器官的中心体温，因为耳膜与大脑中的温度控制中心下丘脑共享血液供给，所以耳朵温度准确反映出中心体温。

因此，体温的变化反映在耳朵里要比其他部位迅速。

●腋窝温度测量的是表皮温度，因此可能不是可靠的中心体温的指标。

●口腔温度受吃、喝、和张口呼吸的影响。

●直肠温度经常滞后于中心体温的变化，还有交叉感染的风险。

人体温度：正常的体温是个范围，下表显示出不同部位正常体温范围也是不同的。

因此，从不同部位进行测量不能进行直接的比较。

不同部位温度范围：部位摄氏度℃华氏度℉腋窝34.7-37.3℃94.5-99.1℉口腔35.5-37.5℃95.5-99.5℉直肠36.6-38.0℃97.7-100.4℉耳温枪35.8-38.0℃96.4-100.4℉●个人的正常体温范围会随着年龄增长趋于降低。

【关键字】精品博朗榨汁机说明书篇一：飞利浦榨汁机1861飞利浦榨汁机1861柑桔是凉性水果，也是世界上最重要的商品水果，是中国亚热带地区栽培面积最广的果树，也是广西最重要的果树。

它包括的种类很多，广西主要栽培的有甜橙、宽皮柑桔、柚、金桔、柠檬等，而每一种类又有许多优良品种。

中国西部有果城四川南充，主产柑桔等水果。

一般榨汁机包括：主机、刀片、滤刀网、出汁口、推果棒、果汁杯、果渣桶、顶盖。

大多可用于搅拌、切割、研磨、碎肉、碎冰、榨汁，榨出的果汁即比买来的果汁营养丰富、味道更佳。

选购方法1. 材质：首选食品级304不锈钢材质，此种材质磁铁吸不住，耐腐蚀易清洁。

塑料及可被磁铁吸住的不锈铁材质，果汁易被氧化，材料容易被果汁腐蚀、生锈和产生细菌。

2. 功率：首选大功率榨汁机，推荐800W及以上功率，功率越大，转速越快，出汁率越高，且大于26000转/分转速的榨汁机，能够破壁水果细胞膜，释放更多营养，口感也更好。

3. 刀网设计：刀网属于易磨损部件，目前家电业已经推出具有镀钛涂层的刀网，极大的提高刀网的硬度和使用寿命。

刀网的直径也是一条重要指标，直径大的刀网能够持续保持出汁率，直径小的刀网易被果汁堵塞，不能持久榨汁。

操作步骤1、将中机架竖直对准主机，放下，装配到位。

2、将榨汁网底部对准电机轮按压下，两手用力要均匀，确认压到位，旋转几下看有无刮中机架。

（提起则为拆开）3、装入顶盖，并扣上安全扣。

（扣安全扣时，请先将扣的上部扣上，再往下压，即可扣到位。

拆时刚好相反，请先将扣的底部打开，即可打开安全扣）4、试一下机，看工作是否正常，如噪音或震动偏大，可再装过，将榨汁网换个方位压入会有好的效果。

榨汁操作1、先将菜水果之类去皮去核，洗净备用，个头大于加料口的请切小。

2、将果汁杯放于出汁口，大集渣斗放于出渣口。

3、开启机器，将水果蔬菜放入榨汁机，用推料杆压下，即可榨出新鲜美味的果汁。

4、炸出汁后，有些榨汁机为了方便客户，其盛汁装置是外置的，需要把再把果汁倒进自己的杯子。

Shaver series 5000ComfortCut Blade System5-direction Flex HeadsOil-control cleansing brushXZ5800/69Close, Fast ShaveThe Shaver Series 5000 adds speed to your morning routine with a fast,ComfortCut Blade System and fully washable heads.A comfortable and close end resultGet a comfortable dry or refreshing wet shave with AquatecRounded edges move smoothly over skin for a protective shaveHeads flex in 5 directions for a fast close shaveEasy to use40 minutes of cordless shaving1 hour charging time1-level battery and travel lock Indicators2-year guarantee, worldwide voltage and replaceable bladesGet the most out of your shaverClick-on brush to cleanse more thoroughly than by handHighlights5-direction Flex Heads5-direction Flex Heads with 5 independent movements ensure close skin contact for a fast and close shave even on neck and jaw line.ComfortCut Blade SystemGet a comfortable shave, wet or dry. OurComfortCut blades with rounded profile heads glide smoothly across your skin while protecting it from nicks and cuts.Aquatec Wet & DryChoose how you prefer to shave. With the Aquatec Wet & Dry seal, you can opt for a quick yet comfortable dry shave. Or you can shave wet – with gel or foam – even under the shower.40 minutes of cordless shavingYou'll have 40+ minutes of running time –that's about 13 shaves – on a one-hour charge.This shaver only operates in cordless mode.1-hour charging timeShave longer with every charge, thanks to our powerful energy-efficient, long-lasting battery.Do a quick charge for 5 minutes and you’ll have enough power for one shave.SmartClick cleansing brushClick on our cleansing brush to clean your face more thoroughly than you can by hand. Use it with the cleanser of your choice. It removesdead skin cells and increases micro-circulation, leaving your skin feeling fresh and radiant.LED displayThe intuitive display shows relevantinformation, enabling you to get the best performance out of your shaver: - 1-level Battery Indicator - Battery Low Indicator -Travel Lock IndicatorBuilt to lastAll of our shavers come with a 2-yearworldwide guarantee and can adapt to any voltage. The long-lasting blades only need to be replaced after 2 years.SpecificationsShaving PerformanceShaving system: ComfortCut Blade System Contour following: 5-direction Flex Heads SkinComfort: AquaTec Wet & Dry AccessoriesSmartClick: Oil-control cleansing brush Maintenance: Protective capEase of useDisplay: 1 level battery indicator, Battery low indicator, Travel lock indicatorCleaning: Fully washableOperation: Unplug before use DesignHandle: Ergonomic grip & handlingColor: Phasma silver - Bright silverPowerBattery Type: NiMHRun time: 40 min / 13 shavesCharging: 1 hour full charge, Quick charge 5min for 1 shaveAutomatic voltage: 100-240 VMax power consumption: 9 WStand-by power: 0.1 WService2-year guaranteeReplacement head: Replace every 2 yrs withSH50Cleansing brush RQ560 or RQ563: Replaceevery 3-6 monthsPackagingSpecial: Giftpack* SmartClick cleansing brush - compared to manualcleansing in same condition, according to the resultsfrom the external clinical test on 30 candidates and in 3hours after cleansing© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2019‑07‑30 Version: 7.2.1EAN: 08 71010 38213 97 。

博朗听书机使用手册EV1000 V1.0目 录一. 本机概况-------------------------------------------------------------------------21.1功能特点------------------------------------------------------------------------21.2示意图--------------------------------------------------------------------------21.3按键介绍------------------------------------------------------------------------31.4充电----------------------------------------------------------------------------41.5磁盘选择------------------------------------------------------------------------4二. 操作过程-------------------------------------------------------------------------42.1开关机--------------------------------------------------------------------------5 2.2阅读听书机----------------------------------------------------------------------52.3听音乐--------------------------------------------------------------------------62.4收音 ---------------------------------------------------------------------------72.5录音及录音回放------------------------------------------------------------------72.6系统功能设置--------------------------------------------------------------------8三. 规格参数、注意事项及简单故障处理-------------------------------------------------8四. 电脑驱动程序安装说明-------------------------------------------------------------9五. 电脑驱动程序使用说明------------------------------------------------------------105.1电脑驱动程序功能介绍-----------------------------------------------------------105.2 DOC格式文件转为TXT格式-------------------------------------------------------115.3 听书机程序烧录----------------------------------------------------------------11前 言感谢您使用广州博朗电子产品有限公司的产品。