西梅卡工业产品手册

Templatefor anIT Operations ManualProduct Descriptiondistributed byCopyright © 2005-2006 Mercury Consulting Ltd.Published in March 2005Summary and ScopeThis template for an IT Operations Manual / IT Systems-Handbook will help you •that no important item is forgotten and• a common handbook structure is used throughout all systems. This will support easy cross-system troubleshooting and documentation.The resulting Operations Manual / Systems-Handbook is an important deliverable of the overall IT system for•compliance with documentation-requirements for systems and processes required by internal QA-department or internal auditing department or external auditors or other organizations and lawsand it is an essential source of information to support•daily operations by clearly description of all active and proactive tasks to keep the system running and prevent unplanned outages and by providing all informationrequired.•special operations e.g. outage planning and all special tasks from shut-down to startup•troubleshooting by ensuring that all required information is immediately available.Especially in case of problems this document should contain all information required by internal staff or especially by external experts to analyse the problem •all other active and proactive tasks (e.g. Hardware / Software / License upgrades / extensions to cover increasing usage) required to keep the system running within the expected performance limits and prevent unplanned outages (e.g. because of anexpired license key or exceeding the license limit)AudienceDevelopment ManagerThis template supports the efficient creation of an Operations Manual which is animportant part of the delivery.Operations ManagerThe operations manager should customize this template according to the requirements of his team and afterwards communicate those customized document to theDevelopment Manager.QA ManagerThis template allows the QA Manager to check the Operations Manuals delivered for completeness.If you think that you don't need this template,because ...... you have already Operations Handbooks for your Systems ?•Use this comprehensive template to cross-check if your current Operations Handbooks are complete !... you store all information in an comprehensive ConfigurationManagement Database (CMDB) ?•Use this comprehensive template to cross-check if your CMDB covers all types of information! ... you outsourced development and you expect the operations and system handbook as part of the delivery•Use this template in the contract specifications to clearly express what you expect thus to avoid “misunderstanding” between vendor and you about the content of theoperations handbook. Using this template for this purpose is much cheaper than solvinga single dispute with the vendor. ...it's much work to write the handbook and yoursystems are running without itbecause ...... the system runs even without Operations Manual. One member of your staff has that in his head.•But the second person (who shares on-call duty with the main person) might know the most important details how to re-start after a crash but might not be aware of all e.g.monthly tasks. And latest at the first hand-over to a new main responsible person, the new person will have to write down everything the former person tells. If the personjust knowing it leaves unexpected then all the information must be re-engineered -definitely much more work than the initial documentation. Huge money was spent in the area of “Knowledge Management” - not writing a Systems and Operations Handbookmeans not even documenting required knowledge, making “Knowledge Management”impossible.• A comprehensive System- and Operations Handbook is an important part of the Operations / Production Managers “Job Insurance”. Without such a documentation hecan in case of an audit not proof that all tasks are assigned and checked for execution.Table of Contents Introduction (6)Purpose of this template (6)Purpose of the generated "Systems andOperations Handbook" (6)Audience (7)Document / History (8)Missing Information (8)Related Company Internal Documents (8)Further Reading / Published Literature (8)Overview (9)System Overview (9)Ownership and Key Contacts (10)Hours of Operations - Primary / SecondaryBusiness Hours (10)System Classification (11)System History (11)Auditing History (11)Restore / Recovery Tests (12)Legal Requirements (13)Duties (13)List of Applicable Laws (13)Overview Interfaces and interfacing Applications (15)External Interfaces (to 3rd Parties) (15)Interfaces to systems operated by otherdepartment (15)Internal Interfaces (within IS OperationsDepartment) (15)Software used - Versions and Licenses (16)Overview Environments (17)Responsibilities (17)Operations Calendar (18)Change Management (19)Open Change Requests (19)Closed Change Requests (19)Configuration Management (20)Functional Configuration Management (20)Technical Configuration Management (20)Configuration for National Language Support / Charactersets (20)User Management (21)Technical Users (21)Personal Accounts for IT- and IS-Staff (22)Personal Accounts for Application Users (except IS- and IT-Staff) (22)Backup and Recovery (23)Backup, Restore and RecoverabilityRequirements (23)Conceptual Explanation and Description (24)Restore and Recovery Instructions (24)Backup Schedule (25)Scheduling Constraints (25)Schedule (25)Correctness of Backup................................25Permanent Background Processes and Scheduling for Jobs including Interfaces (26)Shutdown and Startup / Planned Outages and Changes (27)Maintenance Window (27)Organization of an Shutdown (Planned Outage) of this application (27)Impact of an Shutdown of this application (27)Impact of an outage of an interfacing system on this system (28)Checklist for a planned outage (29)Daily, Weekly, Monthly and other regular Duties31 Monitoring, Troubleshooting, Escalation (32)Error Messages (32)Identification of devices and users (32)Known Problems (33)Overview (33)Details (33)Monitoring and Ticket Handling (34)Tabular overview of events (34)Detailed Description of Events (35)Ticket Handling (37)Irregular jobs, e.g. reorganizations, upgrades, migrations (38)Checklist "Issues" (38)Time Table (39)PI's, KPI´s, OLA's and SLA´s (40)Detailed KPI Description (41)Known Limitations (42)Functional Limitations (42)Technical Limitations (42)Capacity Related Limitations (42)Purging and Archiving (43)Strong growing data (43)Slow growing data (44)Logfiles / Errorfiles (44)Appendix A - Configuration Parameters (45)Non-Default Parameters of the OperatingSystem and Filesystem (45)Non-Default Parameters of the Database (45)All Configuration Parameters of the Application (45)Technical Configuration Parameters (45)Functional Configuration Parameters (45)Appendix B - Capacity Plan (46)Initial Capacity Plan (46)Initial Usage Factors (46)Initial Business Forecast (46)Initial Capacity Forecast for next 3 and 12months (47)Summary and Issues of Capacity Reportsagainst forecast (48)Revised Capacity Plans (48)Appendix C - Incident Log (49)Appendix D - Problem Log (50)Open Issues (50)Closed Issues (50)Appendix E - Change Log (51)Appendix F: Duties DBA and Application Support52 Appendix G - Documentation Template for Interfaces (59)DeliverablesImmediately after your credit card payment was automated processed you can download following file:Filename Size DescriptionZip-file containing all of the following filesophb.zip450KBWithin this ZIP-file you will find following files:Filename pages Descriptionophb.pdf64Document in Adobe Acrobat format, Acrobat-reader required.ophb.rtf Same content, editable RTF-format, can be imported into any wordprocessor.PurchaseYou can purchase online and immediately download at/template_operations_manual_purchase.htmlService – We write your Operations Manual!The Operations Manual can be delivered in English and German.Your SituationYou do need an Operations Manual.Although our Template for an Operations Manual enables you to do it yourself, fastand efficient, you don't have even that time.Our VisionOur vision is a systems handbook which not only satisfies every auditor, but is also a majorhelp for your daily and non-daily operations. Our consultants have in addition to experience in application support also excellent writing skills ("Technical Writer") in English and German andare able to compile a systems handbook...•by providing application support we learn how the system works and fill step by step our Handbook-Template•by "Knowledge Engineering" - Reading available information and interviewing your application support staffOur ChallengeOur challenge is to create and deliver your Operations Manual without consuming much of your time.How we will achieve this:We are different and we work differentWe love graphics and tables Graphics visualizing the data flow through different system processes and interfacesbuild the core of the handbook. Factual information for all the items in the graphic are presented in tabular form. Free text is just used for explanations and backgroundinformation.The Delivery Just sending the text file is the most simple and most common delivery, butunfortunately storing the file on a shared place (file system, your intranet, yourdocument management system) is too often the last activity of this file. Neveraccessed again. Often such forgotten, that the operations manual is not even knownto new staff or staff filling in during vacation.Our preferred "Handover" is to conduct together with the Operations Manager and theapplication support team a "Production Review for Application <x>" Meeting. -Perhaps such review meetings are already conducted quarterly or yearly. In manypoints of those meetings questions like:•"Where is this documented?",•"To whom is this task assigned?"should be asked - and answered by showing the related section in the OperationsHandbook.Products related to this Service:Template Operations Manual /Operations Handbook/template_operations_manual.htmlDocumentation Template forApplication Interfaces/EAI_application_interface_checklist.html Checklist for Production Release /production_release_checklist.htmlHow Mercury Consulting Ltd. can help youMercury Consulting Limited (MCL) is a professional consultancy providing experience, support and training in IS/IT operations for companies during high-time-pressure startup phase and following consolidation phase, especially in the Telecom-market.Our Productsyou can purchase online and immediately downloadat our eBook-ShopOur Checklists and Templates will help you to ensure that good or best practice is not only known but consistently applied!Database Independent ProductsProduct Benefit150 Non functional Requirements.Requirements Template with 150 non functionalrequirements for selecting or developing robust, reliable, stable and manageable applications to meet the ServiceLevel Agreements (SLA's).For external RFP's (Request for Proposal) and for internaldevelopment.Checklist for Data Migration65 important questions to identify and address or excludetypical migration pitfalls in an early phase of the project,thus ensuring the confidence for keeping the time plan.Template: Systems- and Operations Handbook Template to establish that documentation auditors like to see!Interface Checklist Those questions which you need to ask before starting thedevelopment!Requirements, Checklist and Template for Planning,Defining and Documenting Application Interfaces.Checklist for Production Release and System Handover Checklist for small and medium projects focusing on non-functional aspects for operations team.Simple but effective!Business Requirements for Archiving and Purging Template with Business Requirements for Archiving & Restore & Purging. Not removing old customer data can cause conflicts with privacy laws. Business must act and clearly specify what to purge and what to archive!Application Health Check: Stability Assessment Using this template to check your systems - and DOCUMENT the findings might show you even more potential issues beyond invalid objects.Backup SLA / OLA Operations Level Agreement (OLA) for Backup andRecoveryTechnology Selection for Disaster Recovery (DR) Requirements Template to define your requirements for and constraints related to disaster recovery.Decision Template to select the best suitable technology group for disaster recovery.Oracle Database Specific ProductsThe author is Oracle Certified Professional (OCP) for 9i and 10g, but the products are not authorized by Oracle.Product BenefitTemplate for Database Operations Level Agreement (OLA) / SLA If a Service Level Manager needs to offer to Business a Service Level Agreement (SLA) for an End-to-End IS/IT-Service, he sign this SLA only after he arranged within IS/IT for each system or component used to provide this service an Operations Level Agreement (OLA) with the providing team or department.This document provides a template for such an Operations Level Agreement (OLA) for Oracle Databases containing the agreed values and for QA-purpose also the measures implemented to reduce the likelihood of violations of those agreed values.It does not only deal with availability, but contains also comprehensive service catalogue of advanced DBA services and a template for the Service Level Reporting (SLR).Database Health Check - Part 1: Stability Assessment Stability Assessment of your Oracle Database.Most Application- and Database-Crashes can be avoided when detecting early indicators and reacting to them. Be Proactive - Check Now!DBA and Application Support: Job Description and SelfAssessment Checklist to ensure that all 60 DBA-duties are assigned: System DBA, Development DBA and Application DBAversus Application SupportIf you have just a job role "DBA", but not a dedicated job role "Application DBA" those 19 duties must be explicitly assigned to either "Application Support" or to the "DBA" - otherwise they might not be executed! Detect unassigned tasks before an auditor reports them !This product addresses disputes between System DBA and Application Support (or, if existing, dedicated Application DBA) regarding the responsibility for the application's database objects.Our free Whitepapers /wp/whitepapers.htmlWhitepaperBenefit and Description The Importance of Application Level Monitoring.Keeping your applications free from invalid objects is an important task, but does not guarantee error freeoperations. This free whitepaper explains the difference between "Application Level Monitoring" to "DatabaseMonitoring" and "System/Server/OS"-Monitoring.Important Facts about Redolog- and Archivelog in Oracle Databases for Change Managers and Application Support Staff Understanding the topic “archivelog volume” can avoid unexpected troubles when applying changes or conducting upgrades.This awareness paper explains why Change Managersmust ask questions about the archivelog volume created during changes and upgrades and why applicationsupport staff – and not only the DBA - must understand this topic.The Danger of Invalid DatabaseObjects An awareness paper for Operations Managers and Application Support describing the problems and potential risks caused by invalid objects in an OracleDatabase.Private or Public Synonyms – or no Synonyms at all ? A decision support paper visualizing the pro's and contras on a single page in tabular form and evaluatingthe arguments.Our Services /services.htmAbout the AuthorThe Author of those white papers and products is anwith 12 years experience as DBA and 6 years experience in Telecommunications Companies.。

维萨拉工业测量产品手册湿度 | 温度 | 露点 | 二氧化碳 | 沼气 | 油中水分 | 连续监测系统 |溶解气体分析系统 | 过氧化氢 | 压力 | 气象 | 服务支持观测让世界更美好维萨拉的工业测量业务领域产品能够帮助客户了解工艺过程。

我们的产品为客户提供准确可靠的测量数据，帮助客户做出优化工业过程的决策，从而提高过程效率、产品质量、生产力和产量，同时减少能源消耗、浪费和排放。

我们的监测系统还能帮助客户在受监管的环境中运营，以履行监管合规性。

维萨拉工业测量服务于多种类型的运营环境，从半导体工厂和高层建筑，到发电厂和生命科学实验室，对环境条件的可靠监测是实现成功运营的先决条件。

维萨拉的测量产品和系统广泛应用于监测温度、湿度、露点、气压、二氧化碳、汽化过氧化氢、甲烷、油中水、变压器油中溶解气体和液体浓度等参数。

我们的生命周期服务可在测量仪表的整个使用寿命内提供维护。

作为值得信赖的合作伙伴，我们通过在产品和系统生命周期中保证准确的测量数据来支持客户做出可持续的决策。

本产品目录对我们的产品进行整体的介绍，以帮助您选择适合您需求的产品。

如需更多信息，请通过以下方式联系我们：销售热线：400 810 0126电子邮箱：**********************公司网址：扫描二维码，关注维萨拉企业微信3目 录Indigo系列变送器Indigo200系列数据处理单元 (7)Indigo300数据处理单元 (9)Indigo510数据处理单元 (12)Indigo520数据处理单元 (15)用于抽检和校准的手持设备Indigo80手持式显示表头 (18)HMP80系列手持式湿度和温度探头 (21)DMP80系列手持式露点和温度探头 (23)HM70手持式湿度和温度仪 (26)HUMICAP® 手持式湿度温度仪表HM40系列 (29)DM70手持式露点仪 (33)MM70适用于现场检测的手持式油中微量水分和温度测试仪 (36)湿度和温度用于测量相对湿度的维萨拉HUMICAP® 传感器 (38)如何为高湿度应用选择合适的湿度仪表 (40)Insight PC机软件 (44)HMP1墙面式温湿度探头 (46)HMP3一般用途湿度和温度探头 (48)HMP4相对湿度和温度探头 (51)HMP5相对湿度和温度探头 (54)HMP7相对湿度和温度探头 (57)HMP8相对湿度和温度探头 (60)HMP9紧凑型湿度和温度探头 (63)TMP1温度探头 (66)适用于苛刻环境中湿度测量的HMT330系列温湿度变送器 (68)HMT370EX系列本安型温湿度变送器 (78)HMT310温湿度变送器 (84)HUMICAP® 温湿度变送器HMT120和HMT130 (87)适用于高性能暖通空调应用的HMW90系列湿度与温度变送器 (90)HMD60系列湿度和温度变送器 (92)HMD110/112和HMW110/112湿度和温度变送器 (96)适用于楼宇自动化高精度室外测量的HMS110系列温湿度变送器 (99)HMDW80系列温湿度变送器 (101)适用于楼宇自动化应用室外测量的HMS80系列温湿度变送器 (105)HMM100湿度模块 (107)适用于OEM应用的HMM105数字湿度模块 (109)HMM170温湿度模块 (111)INTERCAP® 温湿度探头HMP60 (113)4INTERCAP® 温湿度探头HMP63 (115)HUMICAP® 温湿度探头HMP110 (117)HUMICAP® 温湿度探头HMP113 (120)SHM40结构湿度测量套件 (122)HMK15湿度校准仪 (125)DTR500太阳辐射和雨水防护罩 (127)HMT330MIK气象安装套件 (129)适用于动力汽轮机进气测量的HMT300TMK汽轮机安装组件 (131)露点Vaisala DRYCAP® 传感器用于测量干燥过程中的湿度 (133)DMP5露点和温度探头 (135)DMP6露点探头 (138)DMP7露点和温度探头 (140)DMP8露点和温度探头 (142)DMT340系列露点和温度变送器 (145)适用于高温应用的DMT345和DMT346露点变送器 (151)DMT152露点变送器 (155)DMT143露点变送器 (157)DMT143L露点变送器 (160)用于冷冻干燥机的DMT132露点变送器 (162)DM70用DSS70A便携式采样系统和采样室 (164)DPT146露点和气压变送器 (166)DPT145多参数变送器 (168)二氧化碳适用于苛刻环境的维萨拉CARBOCAP® 测量传感器 (171)GMP343二氧化碳探头 (173)适用于CO2恒温箱的GMP231二氧化碳探头 (176)GMP251二氧化碳探头 (178)GMP252二氧化碳探头 (181)GM70手持式二氧化碳测试仪 (184)适用于苛刻通风要求应用的GMW90系列二氧化碳及温湿度变送器 (187)适用于智能控制通风系统 (DCV) 的GMW80系列二氧化碳、湿度和温度一体变送器 (190)按需控制通风系统中的GMD20系列二氧化碳变送器 (193)GMD110管道安装式二氧化碳变送器 (195)沼气MGP261多气体探头 (197)MGP262多气体探头 (199)油中水用于测量油中微水的维萨拉HUMICAP® 传感器 (201)MMP8油中水分探头 (203)MMT330系列油中微量水分与温度变送器 (205)5MMT310系列油中微量水分与温度变送器 (209)MMT162油中微量水分和温度变送器 (211)连续监测系统维萨拉viewLinc企业版服务器版本5.1 (213)AP10 VaiNet无线接入点 (215)用于连续监测系统的RFL100无线数据记录仪 (218)HMP115温湿度探头 (223)TMP115宽范围温度探头 (225)维萨拉温度与相对湿度数据记录仪系列DL2000 (227)维萨拉通用输入数据记录仪系列DL4000 (229)维萨拉多应用温度数据记录仪DL1016/1416 (231)维萨拉热电偶数据记录仪系列DL1700 (233)维萨拉中端温度、湿度及触点通道数据记录仪 (235)维萨拉vNet以太网供电数据记录仪接口 (238)溶解气体分析OPT100 Optimus™ 溶解气体分析(DGA)监测系统 (240)MHT410变压器油中微量水分、氢气和温度分析仪 (244)过氧化氢用于测量汽化过氧化氢、相对饱和度和相对湿度的维萨拉PEROXCAP® 传感器 (246)用于过氧化氢、湿度和温度测量的HPP270系列探头 (249)压力用于测量压力的维萨拉BAROCAP® 传感器 (253)PTU300气压、湿度和温度一体变送器 (255)适用于专业气象、航空与工业用户的PTB330数字式气压计 (260)气压传递标准PTB330TS (262)PTB210数字气压计 (265)PTB110气压计 (267)将风引起误差降低的SPH10/20静压头 (269)气象Vaisala用于工业应用测量的风和气象传感器技术 (271)风测量装置WA15 (273)WINDCAP® 超声波风传感器WMT700系列 (276)气象变送器WXT530系列 (278)服务支持面向仪表全生命周期服务 (280)67功能•数据处理单元 USB-C 端口支持使用通用 USB 电缆连接到维萨拉Insight PC 软件•数字和图形彩色显示屏（针对模拟型号提供可选的不带显示屏的款式）•IP65 外壳•24 V AC/DC 电源输入•Indigo201：3 个模拟输出（mA 或 V）•Indigo202：RS-485，带有Modbus ® RTU•2 个可配置的继电器维萨拉 Indigo200 系列数据处理单元是一种主机设备，它显示来自维萨拉 Indigo 兼容探头的测量值，同时也可通过模拟信号、Modbus RTU 通信或继电器将这些测量值传输到自动化系统。

F U N C T I O N I NG C O N D E N S A T E D R A I N S A N D F I L T E R I N G E L E M E N T SCondensate drains Filtering elementsSemi-automatic manual drain; Automatic drain;Depressurisation drain; Depressurisation drain, protected Ports: 1/8 (without drain)Different requirements of the air quality determine the use of different types of filtering elements, which retain the impurities during their working, thus clogging and reducing the amount of air in the passage. For this reason it is suggested to replace them once a year at least.The filters are used to remove impurities in the compressed air, which must then be removed from the pneumatic circuit. The filters can be equipped with different types of drainings of condensate, both automatic and manual.The correct combination and thefunctioning is reported in the table and inthe descriptions on the following pages.F U N C T I O N I NG C O ND E N S A T E D R A I N S A N D F I L T E R I N G E L E M E N T Sautomatic manual automaticdepressurizationdepressurization drain (1/8 port)element 25 µelement 5 µelement element carbonFCASP01* for Series MD the “bowl with drain” is supplied complete with the filtering elementCOMBINATION OF FILTERS / BOWL WITH DRAIN / FILTERING ELEMENTF U N C T I O N I NG C O N D E N S A T E D R A I N S A N D F I L T E R I N G E L E M E N TSSemi-automatic manual drain (Type 0 and 1)Functioning: with the operator mechanism turned clockwise, each time the pressure falls below 0.3 bar, the draining of condensate will be released; when resetting the pressure, the drain will close again. The release can also be carried out manually; when the bowl is pressurised, the operator mechanism is pushed upwards.To avoid the discharge of condensate, the operator mechanism should be turned clockwise to completely closethe drain.Automatic drain (Type 3)Functioning: the presence of liquid inside the bowlraises the float, thus opening the exhaust valve.Depressurisation drain (Type 4)Functioning: each time air is required from the inlet, a slight difference of pressure is created between the upper part and lower part of the drain that rises, thusopening the exhaust valve.F U N C T I O N I NG C O N D E NS A T ED R A I N S A N D F I L TE R I N G E L E M E N T SDepressurisation drain, protected (Type 5)Solution similar to the Type 4 but requiring a ∆P = 1 bar.Functioning: this version has a filtering element which prevents any impurities from clocking the exhaust hole.Bowl without drain (Type 8)The solution with port G1/8 is used to assemble the items to the bowl which is realized with a through hole of ø3 mm and a threaded port G1/8.Closed bowl。

梅钢冷轧产品手册一、梅钢冷轧产线简介1二、梅钢冷轧厂主要机组介绍2三、梅钢产品介绍41、普冷家电(镀锡基板)产品42、电镀锡产品63、热镀铝锌产品94、热镀锌产品11四、第三方检测报告13五、标签与质保书样本16目 录Contents梅钢冷轧大事年表◇ 2004年，宝钢决定自主集成建设梅钢冷轧工程项目；◇ 2006年，明确产品定位为极薄、高表面质量的镀锡原板、镀锡板、镀锌及镀铝锌板；◇ 2007年3月底，梅钢冷轧主体工程开工；◇ 2009年6月1日，各机组陆续进入热负荷试车，梅钢冷轧厂设备国产化比例70.67％，响应了国家大型薄板冷热连轧成套设备国产份值>70%的要求；◇ 2009年11月24日，梅钢冷轧正式宣布投产，可按用户合同订单生产。

梅钢1420冷轧是宝钢股份自主集成创新工程，除连退和电镀锡机组引进外，其它机组以宝钢为主自主集成，国内负责自主设计制造，包括酸轧、连续退火、热镀锌、热镀铝锌、电镀锡，共5条连续生产机组，以及准备、横切、重卷，3条辅助机组。

机组设计最终成品规模为85万吨/年，其中：普冷板带20万吨/年、电镀锡板带20万吨/年、热镀锌板带20万吨/年、热镀铝锌板带25万吨/年，产品主要面向化工、建筑、轻工、家电、结构、农业等行业。

1、 酸洗-轧机联合机组冷轧工序必须为热处理、涂镀等下游工序提供合格的基板，因此冷轧机的能力决定了整个冷轧板带生产厂的生产规模，即冷轧工序是冷轧板带生产中的核心工序。

梅钢酸轧机组的轧机段采用五机架六辊UCM轧制技术，是宝钢在吸收和消化多条冷连轧引进设备和技术的基础上第一次自主集成创新的产物，其中机械设备由一重负责设计，轧钢工艺含有宝钢大量的专利和技术秘密；酸轧机组三电系统的集成、开发和调试由宝信承担。

酸轧机组设计年产量为83万吨，产品主要供下游连续退火机组、热镀（铝）锌机组。

主要生产工序包括：开卷、拉矫、酸洗、圆盘剪切、五机架六辊UCM轧制、卷取。

参展商手册亲爱的参展商:本手册主要为参展商提供有关2023年11月29日至12月2日于上海虹桥-国家会展中心（上海）举行的Automechanika Shanghai - 上海国际汽车零配件、维修检测诊断设备及服务用品展览会的各项数据及细则，以及申请有关服务的表格。

1．主办单位法兰克福展览（上海）有限公司、中国机械国际合作股份有限公司2．展会地点国家会展中心（上海），中国·上海北门，崧泽大道333号；西门，诸光路1888号；南门，盈港东路168号；东门：涞港路111号3．展会日期2023年11月29日至12月1日09:00 - 17:002023年12月2日09:00 - 15:00（严禁提前撤馆！）4．布撤展日期布展：2023年11月26至28日（至18:00）撤展：2023年12月2日，15:30 - 22:005．联合参展a.主办单位接受与参展商有联合经营或属于海外总公司/在中国的经销商/合资伙伴/代表处等关系的企业共同参展，须报名时递交联合参展申请函及相关材料，且获得主办单位的书面确认；b.获批的联合参展须办理应有的参展手续（见下第7项）；c.任何未展前报备且获批的联合参展，一律视作无关拼展，主办单位有权拒绝该企业参加展览会，并对于因此所造成的经济损害对该企业保留索赔及惩罚的权利；d.禁止无关拼展；6．标准展台必填表格表格3 - 参展商胸卡表格4 - 标准展台楣板7．光地展台必填表格表格3 - 参展商胸卡表格5 - 光地展台设计申请表格6 - 电力供应注意事项：a.展台内所有结构、组件、装饰及展品均不得高于6米；b.所有高度超过4.5米（含4.5米）的展台须由大会指定的审图公司另行审批结构安全；c.所有双层展台须由大会指定的审图公司另行审批结构安全；双层展台最小面积54平方米，且展台二层结构面积不得超过一层展台面积的七成；d.光地展台必须购买展台责任保险：单独展台：人民币400元/保单；展团展台：人民币400元/200平方米，每增加200平方米，保费增加人民币400元；e.所有电气操作人员必须持有有效的电工安全操作证；f.场地管理费：人民币30元/平方米；g.展台综合管理押金（可退还）：人民币8,000/100平方米以下（含）展台；人民币15,000/100平方米以上展台；人民币15,000.00/展团展台；h.联合参展的参展商均须单独申请额外会刊刊登（见表格11）、电箱、购买保险；i.参展商及其搭建商须确保遵守本《参展商手册》中各项展台搭建要求、规定事项、消防规定、安全条例及参展条例。

174Parker Hannifin CorporationIndustrial Profile Systems Business UnitHouston, TX 77066IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Catalog 1816Linear ApplicationsProfile Slide Block30-82030-41030-810The slide blocks attach to any surface with M8 button head screws. The block slides along a profile when the profile is stationary, or a profile slides in the block, when the block is mounted.Clamping mechanism can be added to lock slide block in place.Profile Slide Blocks are a versatile, cost efficient concept to build a multitude of adjustable slides and movable rail systems with 40mm and 80mm wide profiles. Delrin slide pads engage directly into the T-slots. Shims provide adjustment for a variety of assembly tolerances. Slide blocks designed for acompression load - do not hang a load from the pad.30-420DescriptionUnit Weight Part #Slide Block 40, 80mm long 1 pc .31 kg 30-410Slide Block 40, 160mm long 1 pc .62 kg 30-420Slide Block 80, 80mm long 1 pc .38 kg 30-810Slide Block 80, 160mm long 1 pc .76 kg 30-820Slide Profile 40 cut off max. 6M 3.46 kg/m 13-410Saw cut necessary for cut to length19-001Slide Profile 80 cut off max. 6M 4.19 kg/m 13-810Saw cut necessary for cut to length19-002Technical Data Al, anodizedIncludes: M5x12 BHCSSlide pad: Delrin; max. continuous surface temperature in air 185ºF (85ºC)Shim: PET (Polyethylene Terephtha-late) .005" thick, four per block Safe load:30-410=1,000 N (225 lbs)30-420=2,000 N (450 lbs)30-810=2,000 N (450 lbs)30-820=4,000 N (900 lbs)ApplicationBearing block for slides and movable rail applications requiring very cost efficient construction. This block can be used on the 40 or 80mm side of 40 series Standard or Heavy profiles.Sold under License from 80/20, Inc., Pat. No. 5,429,438192Parker Hannifin CorporationIndustrial Profile Systems Business UnitHouston, TX 77066Catalog 1816IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Linear ApplicationsHigh Cycle Glide UnitsThese specially designed glide units are used in high cycle applications where rapid acceleration and deceleration takes place.High cycle glide utilizes a steel threaded insert to mount the pad to the glide unit.Shims are available to provide a more precise fit.(30-2805)Available for 40 and 80 series only.Material:Aluminum, Clear Anodized UHMW Glide PadsPart No.StyleProfile Dimensions 30-4001-HC Top Mount, Single 40 x 40see 30-400130-4008-HC Top Mount, Double 40 x 40see 30-400830-4021-HC Side Mount Flush, Single 40 x 40see 30-402130-4022-HC Side Mount Ext., Single 40 x 40see 30-402230-4028-HC Side Mount Flush, Double 40 x 40see 30-402830-4029-HC Side Mount Ext., Double 40 x 40see 30-402930-8001-HC Top Mount, Single 40 x 80see 30-800130-8008-HCTop Mount, Double40 x 80see 30-8008Standard Glide UnitsHigh Cycle Units193IPSINDUSTRIAL PROFILE SYSTEMSIndustrial Profile Systems Business UnitHouston, TX 77066Linear Applications800-333-4932Catalog 1816194Industrial Profile Systems Business UnitHouston, TX 77066Catalog 1816IPSINDUSTRIAL PROFILE SYSTEMS195IPSINDUSTRIAL PROFILE SYSTEMSIndustrial Profile Systems Business UnitHouston, TX 77066Linear Applications800-333-4932Catalog 1816。

工业产品使用说明书范文工业产品使用说明书书信函网权威发布工业产品使用说明书范文，更多工业产品使用说明书范文相关信息请访问书信函网。

【导语】产品说明书制作，是以文体的方式对某产品进行相对的详细表述，使人认识、了解到某产品。

产品说明书制作要实事求是，制作产品说明书时不可为达到某种目的而夸大产品的作用和性能，这是制作产品说明书的职业操守。

下面是大范文网整理分享的工业产品使用说明书范文，欢迎阅读与借鉴。

一、概述1.1用途LCH-SD600型数字MCC保护控制管理装置(以下简称装置)是我公司研制的低压智能配电产品，该产品针对交流380V的低压电动机设计，集保护、测量、信号及显示等功能于一体，集中实现了低压电动机的综合保护、测量及操作与控制。

1.2型号及其含义LCH–SD–6001.3使用环境a)环境温度：-10℃～+55℃，b)贮存温度：-25℃～+70℃，在极限值下不施加激励量，装置不出现可逆变化，温度恢复后，装置应能正常工作;c)相对湿度：不超过85%;d)大气压力：86kPa～106kPa;e)使用地点不允许友爆炸危险的介质，周围介质中不应含有腐蚀金属和破坏绝缘的气体及导电介质，不允许充满水蒸气及有严重的霉菌存在;f)使用地点应具有防御雨、雪、风、沙、灰的设施。

1.4技术特点本装置具有如下主要技术特点：a)集保护、测量、信号、显示等功能于一体;b)具有短路、堵转、过载、接地、低压、、缺相等多种保护功能，各种功能均可选择投/退;c)能够测量电流、电压、电流不平衡率等电气参数;d)具有独立的保护动作(或报警)出口，具有保护动作记忆和信号保持功能;e)小型化外形尺寸(150mm×78mm×145mm)，适合于各种开关柜型;f)采用先进的工业级芯片，总线不出芯片，电气隔离和电磁屏蔽设计符合相关标准，使装置的硬件系统具有高抗干扰能力和工作可靠性;g)保护原理成熟可靠，能够经历长时间的现场运行考验;h)LED状态指示，定制液晶显示，点阵汉显屏幕，界面友好。

第 2 章：物料清单目标这一章目标包括：•创建物料清单 (BOM)•进行与生产相关的物料清单设置•计算物料清单•使用可配置物料清单，包括设置配置流程和配置规则•创建和使用物料清单废料类型•创建和使用度量•对特定数量的消耗量进行进位•使用标准生产报表简介生产或制造产品时，若要制造一个成品，部件或配料必须准备就绪。

实际开始生产以前，这些部件必须是已知的和有组织的。

物料清单类似一个配方，其中包含了制造成品所需的所有配料、组件、部件或原材料。

如果公司只生产几种简单的产品，则手动安排生产是可以的，在每个工作中心正确的物料清单部件都会在正确的时间到达生产车间。

不过，由于大多数公司都有多条产品线，并且每条产品线的复杂程度又各不相同，因此手动计划几乎是不可能的。

这些公司需要以最高效和最经济有效的方式计划和跟踪成千上万的组件和子组件。

Microsoft Dynamics™ AX 在“生产”模块中支持这一复杂的计划流程，并将物料清单的设置和使用作为其核心元素之一。

注意：有关物料清单的详细信息，请参阅“Microsoft Dynamics AX 4.0 物料清单”课程，编号为 8729A。

了解物料清单结构了解物料清单结构是设置“生产”模块所使用的物料清单时的一个重要因素。

这一核心因素必须反映公司获得物料的方式。

在Microsoft Dynamics AX 中，可以根据物料是购买的、在公司内部生产的还是被定义为服务项这三种情况对物料进行分类。

包括：•“物料”类型的物料 – 物料是购买的物料清单物料，但经常包含在制造（物料清单）物料的生产中。

•“服务”类型的物料 – 物料是因某种目的而使用的物料，例如为了量化小时服务。

•“物料清单”类型的物料 – 物料是公司内部的物料。

第三种物料类型（“物料清单”类型的物料）包含制造成品所需的所有组件。

物料清单的组件是作为物料清单结构中的行输入系统的。

图 2-1显示了一个一层有五个构成物料的简单物料清单结构的可视化效果。

WCB-200管理指南内容第一章 (5)关于本指南 (6)重要术语 (6)公约 (6)相关文件 (7)产品概述 (7)关键能力 (7)典型部署 (8)产品注册 (9)联系科鲁布里斯网络公司 (9)第二章WCB-200硬件 (11)WCB-200 (12)包装内容 (12)天线 (12)港口 (12)控制台端口 (13)重置按钮 (13)状态灯 (13)安装 (14)第三章开始工作 (15)纵观全局 (16)配置程序 (16)A.配置你的电脑 (16)B.启动WCB-200 (16)C.执行这些初始登录任务 (16)D.配置无线网络 (17)E.进入WCB (18)第四章使用管理工具 (20)启动管理工具 (20)定制管理工具的设置 (20)管理员认证 (20)登录控制 (21)网络服务器 (21)安全问题 (21)自动刷新 (22)网络不活动注销 (22)IP地址配置 (22)管理IP地址 (23)无线电配置 (24)无线范围 (24)配置 (25)使用电台配置文件来建立连接 (28)添加或编辑一个配置文件 (28)一般 (29)无线安全 (29)关键来源 (30)加密类型 (31)查看附近的AP (31)领域描述 (31)处理不支持的流量 (32)连接串行设备 (33)通过TCP配置串口 (33)TCP连接 (34)串行端口 (34)港口控制 (35)状况 (35)DNS配置 (35)DNS高级设置 (35)以太网MAC克隆 (36)像一个DHCP中继代理一样行事 (37)IP转发 (38)使用无线安全过滤器来限制流量 (38)SNMP (39)配置SNMP设置 (39)属性 (39)代理人 (40)安全问题 (40)陷阱 (40)管理证书 (40)802.1X证书 (41)802.1x-安装TLS客户证书 (41)802.1x-管理TLS客户证书 (41)802.1x-受信任的CA证书 (41)802.1x-管理CA证书 (42)证书商店 (42)受信任的CA证书库 (42)证书和私钥存储 (43)证书的使用 (44)改变分配给某项服务的证书 (45)关于证书警告 (45)配置文件管理 (46)手动配置文件管理 (46)备份配置 (46)重置配置 (47)恢复配置 (47)预定的业务 (47)用cURL管理配置文件 (48)下载配置文件 (49)将配置重设为出厂默认值 (49)固件更新 (50)立即更新 (50)预定的更新 (50)用cURL更新固件 (51)附录A监管信息 (53)监管信息 (54)美国:联邦通信委员会（FCC） (54)请注意!暴露于无线电频率辐射中 (54)干扰声明 (54)加拿大。

SIMATICS7-1500/ET 200MP工艺模块TM PosInput 2 (6ES7551‑1AB01‑0AB0)设备手册06/2022A5E03982222-ACSiemens AG Digital Industries Postfach 48 48 90026 NÜRNBERG 德国A5E03982222-ACⓅ 06/2022 本公司保留更改的权利Copyright © Siemens AG 2022.保留所有权利法律资讯警告提示系统为了您的人身安全以及避免财产损失，必须注意本手册中的提示。

人身安全的提示用一个警告三角表示，仅与财产损失有关的提示不带警告三角。

警告提示根据危险等级由高到低如下表示。

危险表示如果不采取相应的小心措施，将会导致死亡或者严重的人身伤害。

警告表示如果不采取相应的小心措施，可能导致死亡或者严重的人身伤害。

小心表示如果不采取相应的小心措施，可能导致轻微的人身伤害。

注意表示如果不采取相应的小心措施，可能导致财产损失。

当出现多个危险等级的情况下，每次总是使用最高等级的警告提示。

如果在某个警告提示中带有警告可能导致人身伤害的警告三角，则可能在该警告提示中另外还附带有可能导致财产损失的警告。

合格的专业人员本文件所属的产品/系统只允许由符合各项工作要求的合格人员进行操作。

其操作必须遵照各自附带的文件说明，特别是其中的安全及警告提示。

由于具备相关培训及经验，合格人员可以察觉本产品/系统的风险，并避免可能的危险。

按规定使用 Siemens 产品请注意下列说明：警告Siemens 产品只允许用于目录和相关技术文件中规定的使用情况。

如果要使用其他公司的产品和组件，必须得到 Siemens 推荐和允许。

正确的运输、储存、组装、装配、安装、调试、操作和维护是产品安全、正常运行的前提。

必须保证允许的环境条件。

必须注意相关文件中的提示。

商标所有带有标记符号 ® 的都是 Siemens AG 的注册商标。

All leaflets are available on: Process Industry - IPipeconnectionsSeriesATEX Ex d, IP66/67 IEC 615081/4 - 1/23271/4 - 1/23271/45511/45511/45511/4 - 1/2327Q u i c k S e l e c t i o n C h a r t p a g e s : I I00127G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d .Solenoid Valves / Pneumatic Valves (3/2) ◄ (1)Direct or Pilot Operated Solenoid Valves / Pneumatic Valves (4/2 - 5/2 - 5/3) ◄ (2)Solenoid Valves / Pneumatic Valves (3/2) ◄ (3)Pressure Operated Valves (3/2) ◄ (4)All leaflets are available on: II - Process Industry Quick Selection Chart - PROCESS INDUSTRY127GB-218/R1Availability,designandspecificationsaresubjecttochangewithoutnotice.Allrightsreserved.Solenoid Valves / Pneumatic Valves (3/2)◄(1) Direct or Pilot Operated Solenoid Valves / Pneumatic Valves (4/2 - 5/2 - 5/3)◄(2)Solenoid Valves / Pneumatic Valves (3/2)◄(3)Pressure Operated Valves (3/2)◄(4)All leaflets are available on: Process Industry - IIIASCO offers a wide range of products for the process industry such as the oil & gas, (petro)chemical, pharmaceutical, power generation, water/waste water, food and paper & pulp sectors.Solenoid pilot valves are used to activate single-acting or double-acting pneumatic actuators operating as the driving force on process valves. Quality and reliability of the process valves are paramount for production line safety and output.The products are often installed in environments with low or high temperatures, corrosive atmospheres, or high mechanical stress. They must be designed to provide a high level of long-term reliability under severe operating conditions.Our catalogue “Pilot Valves and Systems for the Process Industry” details the full line of our process industry products adapted to your specific sector of activity.Y ou will find our complete range of solenoid valves, pressure operated valves and pneumatic components on the internetat .To provide you with the best solution for your application needs, ASCO offers a variety of exclusive pilot valve features including:• I ntrinsic safety• L ow power consumption • N amur mounting pad• S afety shutdown systemsOur low power solenoid valves are compliant with all major communication protocols such as: DeviceNet™, EtherNet/I P TM , Profibus DP , PROFINET, ModbusTCP and Foundation Fieldbus00127G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d.G3503502501Our pilot valves are available in a large selection of versions:• 3x2-, 4- and 5-way direct acting or pilot operated valves • B rass, stainless steel, aluminium or plastic bodies • S eals in a wide choice of elastomers• S olenoid valves for use in potentially explosive atmospheres to A TEX designed to operate at temperatures from -60°C to +100°C.All leaflets are available on: IV - Process IndustryT o meet bothenvironmental standards and actuator requirements,pilot valves need to beselected with care, with reference to:Different types of pneumatic actuators: rack & pinion, scotch yoke, linear etc.•F unctional safety •P ower consumption and type of electrical connection• C ommunication through fieldbus and remote I/O• E nvironment:Temperature, humidity, aggressive atmospheres, potentially explosive atmospheres, and protection rating• M ounting interface • F low capacity • F unction• C hoice between direct-acting or pilot operatedvalvesClean/aggressive environmentsAll the exhaust ports are pipable for environment protection.The solenoid valve’s internal volumes are channelled to the exhaust port to prevent the risk of corrosion in aggressive atmospheres. In NAMUR version, the spring-return chamber of the single-acting actuator “breathes” through the solenoid valve, isolatingit from the outside atmosphere.00127G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e wi th o utn o t i c e . A l l r i g h t s r e s e r v e d .All leaflets are available on: Process Industry - Vstainless steelVarious valve body materialsq eb mb q ia q nALarge choice of solenoid operatorsSeries 327• Series 327 1/4” -1/2” direct acting solenoid valve are recommended for pilot applica-tions with high flow, a wide pressure range and no minimum operating pressure. • The balanced poppet design combines a special low friction seal with low power con-sumption.• Functional safety levels: SIL 3, IEC 61508• General characteristics (brass, aluminium or stainless steel bodies): - Orifice size = 5,7 mm (1/4), 12 mm (1/4, 1/2) - T emperature range: -60°C to +120°C - M anual Operators are optional including an under pressure removable type - S tandard or tamperproof manual reset, NAMUR versions, redundant solenoid valves, for linear actuators (VDE 3845).• Environmental NACE compliant and certified vibration resistant in combination withWSCR solenoidsThe balanced poppet design provides a uniform pressure field around the poppet that prevents any resistance to pressure when the valve opens. T he coil therefore only has to offset the friction of the seal.12 mm, 1/4 - 1/2 (3/8 on request) manual reset construction00127G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d .WS N F I S / N F I SAll leaflets are available on: VI - Process Industry 0127GB-218/R1Availability,designandspecificationsaresubjecttochangewithoutnotice.Allrightsreserved.All leaflets are available on: Process Industry - 1FEATURES• Solenoid valves with explosionproof operators NF or WSNF type for use in poten-tially explosive atmospheres according to A TEX Directive 2014/34/EU EU type examination certificate no.: LCIE 00 ATEX 6008 X IECEx Certificate of Conformity no.: IECEx LCI 07.0015X• Compliance with the Essential Health and Safety Requirements has been as-sured by compliance with the International and European Standards EN-IEC 60079-0, EN-IEC 60079-1 and EN-IEC 60079-31• The solenoid valves are recommended for pilot applications with high flow, wide pressure ranges and no minimum operating pressure • Special execution for low ambient and fluid temperatures• Manual Operators are optional including an under pressure removable type• The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability (TÜV & Exida certification)GENERALDifferential pressure 0 - 10 bar [1 bar =100 kPa]Maximum viscosity 65 cSt (mm 2/s)Response time< 100 msfluids ( )temperature range (TS)seal materials ( )5,7 mm air, inert gas, water, oil - 20°C to + 120°C FPM (fluoroelastomer)- 40°C to + 40°C VMQ (silicone)- 60°C to + 60°C (F)VMQ ((fluoro)silicone)12 mmair, inert gas- 25°C to + 60°C NBR (nitrile)- 10°C to + 90°C FPM (fluoroelastomer)- 50°C to + 60°C(F)VMQ ((fluoro)silicone)MATERIALS IN CONTACT WITH FLUID( ) Ensure that the compatibility of the fluids in contact with the materials is verified Body Brass or stainless steel AISI 316L Stem , core tube Stainless steel Core and plugnut Stainless steel Springs Stainless steel Seals & poppets Ø 5,7 mm: FPM or VMQ or (F)VMQ Ø 12 mm: NBR or FPM or (F)VMQ Rider ring PTFEOTHER MATERIALSSolenoid enclosure NF: Chromated aluminium, epoxy coated WSNF: Stainless steel (AISI 316L)Bonnet, cover screws NF: Steel (zinc plated) WSNF: Stainless steel Core tube Stainless steel Core and plugnut Stainless steelELECTRICAL CHARACTERISTICSSAFETY CODECoil insulation class H (5,7 mm), F (12 mm) IECEx / q II 2G Ex db IIC T6..T4 Gb Coil connection Screw terminals IECEx / q II 2D Ex tb IIIC 85°C to 135°C Db IP66/67 Electrical safety IEC 60335-1Standard voltagesDC (=) : 24V - 48V(Other voltages and 60 Hz on request )AC (~) : 24V - 48V - 115V - 230V / 50 Hzprefix optionpower ratings operator ambient temperature range (TS)replacement coiltype(1)inrush~holding ~hot/cold =~=(VA)(VA)(W)(W)(C°) (3)230 V/50 Hz 24 V DC NF WSNF5,71010109 / 11,2-60 to + 40/60400915-017400913-14201-025,85,85,85,2 / 5,7-60 to + 60/75/90400921-297400914-4423,73,73,73,2 / 3,6-60 to + 60(2)400914-2421,851,851,851,5 / 1,8-60 to + 55(3)400914-542121010109 / 10-60 to + 40/60400921-197400911-34201-0214,114,114,111 / 14-60 to + 40/60/90400921-697400911-642(1)Refer to the dimensional drawings on the following page.(2) A C limited to 127V/50/60Hz or 125V/DC(3) T emperature range can be limited by sealings.(3)Only available in 24, 48 and110V/DCoperator AC (~)operator DC (=)Pn max. ambient temp. °CPn max. ambient temp. °Csurface temperaturesurface temperatureT685°C T5100°CT4135°C T685°C T5100°C T4135°C (W)(W)insulation class F/H (155°C/180°C) 100% E.D.insulation class F/H (155°C/180°C) 100% E.D.1,85 (4)55--1,855--3,7 (4)60--3,660--5,8 (4)6075905,760759010 (4)4060-104060-14,140609011,24060-(4)A C rectified coil construction.14406090SOLENOID VALVESdirect operated, balanced poppet high flow, flameproof enclosureII 2 G/D Ex db IIC T6..T4 Gb / Ex tb IIIC Db IP66/671/4 - 1/2U3/2Series 32700197G B -2018/R 01A v a i l a b i l i t y , d e s i g n a nd s pe c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d .21312 mm orificeAll leaflets are available on: 2 - Process IndustrySPECIFICATIONSpipe size orifice sizeflow coefficientKvoperating pressure differential (bar)power coil (W)catalogue numberoptionsm a i n t a i n e d m a n . o p e r a t o r (2)i m p u l s e m a n . o p e r a t o r (2)min.max . (PS)air ( )water ( )brass stainless steelNPT (mm)(m 3/h)(l/min)~=~=~=~/=~/=U - Universal, FPM seals and poppets1/45,70,457,50101010101011,2NF8327B001WSNF8327B002MS (1)MO --5,85,7NF8327B201WSNF8327B202MS (1)MO --3,73,6NF8327B101WSNF8327B102MS (1)MO --1,851,8NF8327B301WSNF8327B302MS (1)MO 121,52501010--14,114NF8327A649WSNF8327A650MS (1)MO --1/2121,52501010--14,114NF8327A609WSNF8327A610MS (1)MO--U - Universal, NBR seals and poppets 1/2121,52501010--1010NF8327A607WSNF8327A608MS (1)MO --U - Universal, VMQ seals and poppets1/45,70,457,5101010101011,2NF8327B011WSNF8327B012MS (1)MO --U - Universal, (F)VMQ seals and poppets1/45,70,457,50101010105,85,7NF8327B211WSNF8327B212MS (1)MO --3,73,6NF8327B111WSNF8327B112MS (1)MO --1,851,8NF8327B311WSNF8327B312MS (1)MO 121,52501010--1010NF8327A645WSNF8327A646MS (1)MO --1/2121,52501010--1010NF8327A605WSNF8327A606MS (1)MO--U - Universal, (F)VMQ sealings and poppets (minimum fluid temperature -60°C)1/45,70,457,5101010105,85,7NF8327B291WSNF8327B292MS (1)MO --(1) Functional Safety certification is not applicable with this feature.(2)Under pressure removable executionOPTIONS• Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to A TEX Directive 2014/34/EU ( )• Electrical enclosures according to “NEMA” standards are available• Compliance with “UL ”, “CSA” and other local approvals available on request • 3/8” pipe thread executions are available on request•Stainless steel exhaust protector for valves certified to IEC 61508 Functional Safety, catalogue number: 131875-015 (NPT 1/4) or 131875-013 (NPT 1/2)• Other pipe connections are available on request• Any ATEX approved cable entry device can be fitted in the 1/2” NPT threaded entry hole (M20 x 1.5 in option), refer to the nameplate for identification of the maximum cable temperature• Material certification like EN 10204 3.1 on the 316L Stainless Steel bodies are available on request INSTALLATION• The solenoid valves can be mounted in any position without affecting operation • Solenoid valves have 2 or 3 mounting holes in body• 1/2” NPT threaded cable entry. Enclosures are supplied without cable gland • Pipe connection identifier is 8 = NPT (ANSI 1.20.3)•Installation/maintenance instructions are included with each valveSPARE PARTS KITcatalogue numberspare parts kit no.~/=(WS)NF8327B001/002C123670(WS)NF8327B011/012C131237(WS)NF8327B101/102/201/202C132251(WS)NF8327B111/112/211/212C132253(WS)NF8327B301/302C133441(WS)NF8327B311/312C133442(WS)NF8327A605/606/645/646C117638(WS)NF8327A607/608C117640(WS)NF8327A609/610/649/650C117640VORDERING EXAMPLES:NF 8327 B 001230V /50 Hz WSNF8327 B 202MS 115V /50 Hz NF 8327 A 607MO 24V /DC NF8327 A 606230V /50 Hzprefix pipe thread voltagebasic numbersuffixORDERING EXAMPLES KITS:C123670C131237C117640Vbasic numbersuffix00197G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d .All leaflets are available on: V905-18-3DIMENSIONS (mm), WEIGHT (kg)type prefix option catalogue numberA B C D E F G H J K L M N X weight (1)01NF NF8327B001/011/101/111/201/211/291/301/311973013687352410254557323-54482,6NF8327A605/607/609/645/649973016511554321025460100384054762,402WSNFWSNF8327B002/012/102/112/202/212/292/302/312973013687352410254557323-54482,6WSNF8327A606/608/610/646/650973016511554321025460100384054763,8(1)including coil.TYPE 01-02Prefix “NF” , “WSNF” Solenoid Aluminium, stainless steelEN-IEC 60079-1 and EN-IEC 60079-31II 2G Ex db IIC Gb, II 2D Ex tb IIIC Db IP66/671 1/2 NPT2 Manual operator locationType 01:NF8327B001/011/101/111/201/211/291/301/311Type 02:WSNF8327B002/012/102/112/202/212/292/302/312Type 01: NF8327A605/607/609/645/649Type 02: WSNF8327A606/608/610/646/65000197G B -2018/R 01A v a i l a b i l i t y , d e s i g n a n d s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . A l l r i g h t s r e s e r v e d .All leaflets are available on: 4 - Process Industry 0197GB-218/R1Availability,designandspecificationsaresubjecttochangewithoutnotice.Allrightsreserved.。

ION PURE®LX-Z工业型CEDI膜堆操作维护手册本手册适用于:IP-LXM04Z-3IP-LXM10Z-3IP-LXM18Z-3IP-LXM24Z-3IP-LXM30Z-3IP-LXM45Z-32008版西门子(中国)有限公司水处理技术部北京市朝阳区望京中环南路7号，100102电话：010-********传真：010-********ION PURE® IP-LX-Z膜堆操作及维护手册目录章节内容页码声明I使用指南II1.0 注意事项1.1IP-LX膜堆简介11.2 手册的使用 21.3 安装时的注意事项 21.4 操作时的注意事项 31.5 关机时的注意事项 32.0 安装前的准备2.1工具和设备 42.2 检查膜堆 52.3 操作要求 52.4 流量和压降 63.0 安装与启停3.1移动膜堆73.2 检查膜堆扭矩73.3 管道连接83.4 电力连接133.5 启动步骤133.6 关机步骤143.7 关机后重启144.0 维护及故障检修4.1一般性维护指南154.2 特殊性维护指南154.3 清洗和化学消毒步骤194.4 故障检修流程图/运行记录表34附录A 膜堆参数42B 外形图43C 电力连接44D 制造材料45免责声明本操作及维护手册，旨在提供手册印刷时所能获得的完整而准确的信息，以满足您的操作和/或服务要求。

本手册的资料可能没有包含所有的操作细节或变动，也可能没有提供与安装、操作及维护方面有关的所有情况。

如遇到本手册没有明确回答的问题，请联络当地的服务提供商。

IONPURE公司保留对本手册中没有涉及的工艺进行改进的权力。

本手册中的资料仅供参考，IONPURE可能会对信息做出修订而无需事先通知。

所有权声明IONPURE公司拥有对本手册中涉及的信息的所有权。

客户收到或持有本手册并不代表任何所有权的授予或转让，客户以持有手册的方式承认，除非事先取得IONPURE公司的书面许可，否则不对手册中的任何全部或部分信息进行复制，或造成其被复制。

POLISHING PRODUCTS力西克抛光混凝土系列产品LYTHICManufactured bySOLOMON COLORS, INC.CORPORATEHEADQUARTERS4050 Color Plant RoadSpringfield, IL62704 ,USA中国官方代表处苏州绿锤环保材料有限公司苏州市金鸡湖路88号中信大厦610座机:*************传真:*************手机:150****3810产品目录胶体二氧化硅 (3)力西克DAY1 (4)DAY1技术说明书 TIS….………...5-8DAY1案例 (9)力西克微纳米&XL液体硬化剂 (10)液体硬化剂技术说明书 TIS………11-14力西克商业地坪系统案例………...15-16力西克工业地坪系统案例 (17)力西克保护剂 (18)保护剂技术说明书 TIS…………..19-22力西克清洗剂 (23)清洗剂技术说明书 TIS…………….24-26力西克DAY1收光增效剂混凝土浇筑收光力西克微纳米液体硬化剂商业地面抛光系统力西克XL致密钢化剂工业地面抛光系统力西克纳米硅保护剂混凝土表面密封罩面力西克纳米硅清洗剂混凝土表面清洁维护胶体二氧化硅COLLOIDAL SILICA胶体二氧化硅是力西克的核心技术。

它是一种可以与混凝土起到化学反应的物质，通过生成更多的水泥浆，使得混凝土变得更加致密从而提高了混凝土的硬度。

混凝土是由波特兰水泥，水，骨料组成的。

水与波特兰水泥起反应(“水泥水化反应”)，生成了水泥浆。

起初，它是软的且具有流动性，但经过几个小时后其硬度就会提升，变得像晶状体的矿物组织一样。

这种硬度提升的过程并不是由于干燥，而是由于化学反应所产生的。

水泥浆与骨料粘结形成了混凝土。

这种起到粘结作用的“活性成分”叫硅酸钙水化物(CALCIUM SILICATE HY-DRATES(C-S-H). 混凝土的硬度取决于水泥浆的硬度。

中国华南：广东省佛山市南海区简平路1号天安科技大厦1305工厂：广东省佛山市南海区简平路1号天安时代大厦0101网站：USA:AMERICAN SCIENTIFIC KNOWLEDGE INC NY:228 PARK AVENUE, S#85556, NEW YORK, NY 10003, CA:3592 ROSEMEAD BLVD, STE B#220, ROSEMEAD, CA91770ASK 工业自动化(中国）ALWAYS IN INDUSTRIAL AUTOMATION可编程控制产品选型手册经销商ASK INDUSTRIAL AUTOMATION｜ASK 品牌保留随时更改资料信息的权利｜ＲASK 专注工业自动化，科研开发人员长期植根企业现场，为客户研发、设计符合实际需求，操作简单、使用方便、功能稳定的产品。

ASK 切合实际的便捷软件及自动化产品，简化开发、加快效率，缩短产品上市时间；ASK 不断开发着方便大众的工业自动化产品。

人机对话产品：HMI、工业计算机、工业平板电脑、组态软件机器视觉产品：工业级摄像机、控制器、镜头、光源、平板显示器传动控制产品：变频器、伺服驱动及电机、高速精密主轴电机、步进控制器专用控制产品：卷绕、电子称重、裁切、温度控制器Ｒ生产组装老化测试ASK 工业自动化ASK 自动化产品应用于典型项目工程、机械配套、电气革新。

如：安联 、霍尼韦尔 、惠而浦、伟创力、高露洁 、德昌电机 、显示、京东方、 中国南水北调工程、广业集团等企业及项目。

可编程控制器PAC1系列微型PLC，结构小巧功能强大，具有极高的性价比，可广泛适用于纺织化纤、机床、线缆、食品饮料、包装、塑料、钢材、建筑机械、空调、电梯、印刷、电子等机器制造行业。

小机型、高配置、大容量、高速度可选集成模拟量输入输出主机最大I/0点数:172点程序容量达到12K，基本指令只需0.3μs， 可扩展7个模块强大的定位和高速处理能力定位指令：实现对机器设备的位置控制可变速脉冲输出：包络线脉冲输出功能实现对伺服或步进电机的多段变速控制内置高速处理：6路高速脉冲输入，最大频率50kHz；2路100kHz 高速脉冲输出丰富的中断资源支持通讯中断、脉冲中断、失电中断，并可设定中断优先级，实现高级控制强劲的通讯组网能力支持ASK-Link 、ECbus N：N 网络通讯协议，支持OPC 服务，提供Profibus-DP 从站通讯模块灵活的编程方式支持Modbus 网络、掌上电脑、远程拨号三种编辑方式，方便维护和调试方便实用的特色功能提供持殊功能模块组态、变频器通讯指令，使复杂的编程简单化提供系统配置验证工具，方便用户扩展配置更安全，更稳定，更可靠8位密码保护，可设禁止程序上载，防止未授权复制超宽电压设计、三防处理、输入滤波及掉电保护功能，确保PLC 更加稳定可靠产品选型工业自动化PLC 标识(1=微型；2=小型；3=中小型；4=中型；5=大型)(例中为14点输入)(例中为10点输出): B：主模块(Basic module),E：扩展模块(Expansion module): R:继电器(Relay),T：晶体管(Transistor),N:无输出: A:AC220V 电源输入，D:DC24V 电源输入，N：无外接电源输入(可省略)主模块（交流供电）PAC1系列微型可编程控制器主模块主要性能规格I/O 扩展模块特殊功能模块注：产品尺寸（61x90x75）注：产品尺寸（61x90x75）主模块输出电气特性可编程控制器PAC2系列小型PLC，结构小巧，功能强大，具有极高的性价比，可广泛应用于纺织化纤、机床、线缆、食品饮料、包装、塑料、钢材、建筑机械、空调、电梯、印刷、电子等机器制造行业。

梅卡曼德产品手册Mech-Eye工业级3D相机Mech-Vision图形化机器视觉软件 Mech-DLK 深度学习平台软件Mech-Viz机器人智能编程环境梅卡曼德AI+3D视觉专家梅卡曼德致力于用AI+3D技术加速各行业智能化升级。

经多年潜心研发，梅卡曼德现已形成包括Mech-Eye工业级3D相机、Mech-Vision图形化机器视觉软件、Mech-DLK深度学习平台软件、Mech-Viz机器人智能编程环境在内的完整产品链。

可应用于无序物体抓取、高精度定位、装配、工业检测/量测、自动生成轨迹等典型场景。

智能程度高：Mech-Vision 图形化机器视觉软件内置深度学习等先进算法，可处理各类工件以及纸箱、麻袋、货品等典型物体，轻松应对随意堆叠、无序放置、一定程度反光、暗色等复杂工况；稳定可靠：Mech-Eye工业级3D相机具备IP65防护等级，防水防尘，可在严苛的工业环境中稳定运行，且已通过CE、FCC、VCCI及RoHS认证，部分型号相机已通过40000小时MTBF认证;性价比高：整套方案的价格仅为国外典型同类产品的二分之一；开放性强：产品可适配各种主流品牌的机器人；支持对接各种系统及软件二次开发；部署简单高效：即插即用，节省大量部署时间；完全可视化、无代码的编程界面，极大降低使用难度和部署成本；应用案例丰富：在汽车、物流、工程机械、钢铁、新能源、3C等领域已落地1000+实际案例；业务遍布中、日、德、韩、美等10余国家。

产品优势1梅卡曼德机器人推动智能机器人无所不在的存在 2AI+3D+工业机器人解决方案全力协助业务伙伴提升竞争力，把握智能机器人时代的先机获取物体高精度的 3D 信息完成复杂条件下的识别、定位、测量等视觉功能控制机器人应对复杂的应用Mech-Eye 工业级 3D 相机高性能工业级3D相机，可对众多类型的物体输出高质量的3D数据多种相机型号，满足不同场景中抗环境光、高精度、高速度、小体积等多样化需求Mech-Viz 机器人智能编程环境新一代机器人智能编程环境，可视化、无代码的编程界面，一键仿真内置轨迹规划、碰撞检测、抓取规划、混码等智能算法，已适配国内外众多主流品牌机器人支持和服务梅卡曼德团队 700余 人，在全球多地设有团队，自建高标准相机工厂，拥有完整的交付、培训和售后体系，可及时响应全球客户需求可为机器人集成商提供交付支持、人员培训、参考方案设计、展会支持、重难点项目攻关等支持和服务Mech-Vision 图形化机器视觉软件新一代机器视觉软件，完全图形化界面，无需编写代码即可完成上下料、拆码垛、定位装配、涂胶/喷涂/焊接、缺陷检测、尺寸测量等先进的机器视觉应用内置3D视觉、深度学习等前沿算法模块，可满足复杂、多样的实际需求Mech-DLK帮助集成商可自主在本地进行深度学习模型训练3梅卡曼德机器人推动智能机器人无所不在的存在 4300600220430320160150135320280100905001000370800450240100020001500890800450150030003000240012001500单位：mmMech-Eye NANOMech-Eye UHP-140Mech-Eye PRO SMech-Eye PRO MMech-Eye LSR L高性能与性价比的精巧诠释高性能工业级3D 相机，可对众多类型的物体输出高质量的3D 数据；多种相机型号，满足不同场景中抗环境光、高精度、高速度、小体积等多样化需求。

T h e i n f o r m a t i o n p r o v i d e d i n t h i s d o c u m e n t a t i o n c o n t a i n s g e n e r a l d e s c r i p t i o n s a n d /o r t e c h n i c a l c h a r a c t e r i s t i c s o f t h e p e r f o r m a n c e o f t h e p r o d u c t s c o n t a i n e d h e r e i n .T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n s .I t i s t h e d u t y o f a n y s u c h u s e r o r i n t e g r a t o r t o p e r f o r m t h e a p p r o p r i a t e a n d c o m p l e t e r i s k a n a l y s i s , e v a l u a t i o n a n d t e s t i n g o f t h e p r o d u c t s w i t h r e s p e c t t o t h e r e l e v a n t s p e c i f i c a p p l i c a t i o n o r u s e t h e r e o f .N e i t h e r S c h n e i d e r E l e c t r i c I n d u s t r i e s S A S n o r a n y o f i t s a f f i l i a t e s o r s u b s i d i a r i e s s h a l l b e r e s p o n s i b l e o r l i a b l e f o r m i s u s e o f t h e i n f o r m a t i o n c o n t a i n e d h e r e i n .Product data sheetCharacteristicsAP8967Rack PDU 2G, ZeroU, 17.2kW, 208V, (42)C13, (6) C19 (BEING DISCONTINUED - SEEAPDU9967)OverviewPresentationAPC Switched Rack Power Distribution Units(PDUs) enable advanced, user-customizable power control and active monitoring. The output and input connections are ((42) C13, (6) C19 Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment.Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads.Switched Rack PDUs include real power monitoring,a temperature/humidity sensor port, locking IEC receptacles, and low-profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access,configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and are complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.Lead timeUsually in StockGeneralProvided EquipmentInstallation guideRack Mounting brackets Serial configuration cable Safety guidePhysicalCable length 6 ft (1.83 m)Color BlackDepth 2.01 in (5.1 cm)Height 72.01 in (182.9 cm)Product Weight 35.01 lb(US) (15.88 kg)Width4.37 in (11.1 cm)InputLine Rated Current 48 A Max line current 48 A Input current limits 60 A Load Capacity 17300 VA Input Frequency 50/60 HzPlug standard IEC 60309 60 A 3P+PE Nominal Input Voltage3 phaseOutputNumber of power socket outlets42 IEC 60320 C136 IEC 60320 C19ConformanceProduct Certifications CUL ListedUL ListedVCCI Class AStandards EN 55022 Class AEN 55024EN 61000-3-2EN 61000-3-3FCC Part 15 class A EnvironmentalAmbient Air Temperature for Operation23…140 °F (-5…60 °C)Relative Humidity5…95 %Operating altitude0...10000 ftAmbient Air Temperature for Storage-13…149 °F (-25…65 °C) Storage Relative Humidity5…95 %Storage altitude0…50000 ft (0.00…15240.00 m) Ordering and shipping detailsGTIN00731304330905Package weight(Lbs)44.00 lb(US) (19.96 kg) Packing UnitsPackage 1 Height84.61 in (214.9 cm)Package 1 width8.70 in (22.1 cm)Package 1 Length 4.41 in (11.2 cm)Offer SustainabilitySustainable offer status Green Premium productREACh Regulation REACh DeclarationEU RoHS Directive Compliant EU RoHS DeclarationMercury free YesRoHS exemption information YesEnvironmental Disclosure Product Environmental Profile Circularity Profile End Of Life InformationOptimized Energy Efficiency Energy efficient productTake-back Take-back program available Contractual warrantyWarranty 2 years repair or replace。