下载文档原格式
泛达电气（PANDUIT）扎带枪产品大全全自动扎线枪供应输送器PDM 全自动扎带枪PAT1.5M 手持电动不锈钢扎带枪PBTMT/E 气动扎带枪PTH扎带枪ST3EH 不锈钢扎带枪RT2HT 不锈钢扎带枪ST2MT 扎带枪GTH扎带枪GS4EH 扎带枪GTSL 扎带枪GS2BL 不锈钢扎带枪GS4MT扎带枪、扎线枪GS2B 扎带枪GTS 扎带枪GS4H 不锈钢扎带枪T2HTN全自动扎带枪 PAT2S气动扎带枪 PTS全自动扎线枪供应输送器 PDM∙ 型号：PDM说明PANDUIT AUTOMATIC CABLE TIE GUN DISPENSERS PDMDispenses cable ties by separating ties from the carrier ribbon and sending them through a feeder hose to the tool head. System operates on 65 psig (minimum) non-lubricated filtered air and 100 – 24 FAC/TP or 60 Mhz. Extended arm holds a reel of 5000 cable ties for continuous processing. -EI option provides the capability to remotely control the PAT system. Integrators are able to electrically tie the tool cycling in with their automation controls. The 15-pin D-Sub female port is located on the back side of the unit.Product DetailsStd. Pkg. Qty.1Std. Ctn. Weight (lb)0.0000 Std. Ctn. Volume (cf) 0.0000 Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf)0.000000RoHS Compliancy Status CompliantPart DescriptionDispenses cable ties by separating ties from the carrier ribbon and sending them through a feeder hose to the tool head. System operates on 65 psig (minimum) non-lubricated filtered airand 100 – 24 FAC/TP or 60 Mhz. Extended arm holds a reel of 5000 cable ties for continuous processing. -EI option provides the capability to remotely control the PAT system. Integrators are able to electrically tie the tool cycling in with their automation controls. The 15-pin D-Sub female port is located on the back side of the unit.Product Type Automatic Cable Tie ToolColorBlackPricing Description Electrical Interface Enabled PDM DispenserUsed With Cable TiesPLT1M-XMR, PLT1.5M-XMR, BT1M-XMR, BT1.5M-XMRMin. Order Qty.1.0000全自动扎带枪 PAT1.5M∙ 型号：PAT1.5M说明PANDUIT AUTOMATIC CABLE TIE GUN PAT1.5Automatic Cable Tie Installation Tool with Plastic Ergonomic Housing.Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status Compliant in EMEAPart Description Automatic Cable Tie Installation Tool with Plastic Ergonomic Housing.Product Type Automatic Cable Tie ToolLength (ft.)—Length (m)—Color BlackTool Head for cable ties up to 1.3" (33mm) bundle diameter (P/N's PLT1.5M-XMR andDescriptionBT1.5M-XMR)Pricing Description Automatic Cable Tie Tool Head for PLT1.5M-XMR Cable Ties - Plastic Ergo HousingType Tool HeadUsed with Installation Tool—CE Compliant YesMax. Bundle Diameter33(mm)Max. Bundle Diameter (In.)1.31Weight (lb.) 1.70Weight (g) 770Used With Cable Ties PLT1.5M-XMRMin. Order Qty. 1.0000电动不锈钢扎带枪PBTMT/E型号：PBTMT/E说明PANDUIT CABLE TIE GUN PBTMT/EBattery Powered Installation tool for use with the following stainless steel cross section ties:Type MLT andMLTFC: Heavy, extra-heavy, and super-heavyType MLTC: HeavyType MLTDH: Extra-Heavy andsuper-heavyUsed with custom length banding cross sections:Type MB and MBC: Heavy, extra-heavy, andsuper-heavy2 –12 volt Lithium-Ion batteries and 220 volt, 50 Hz charger included.Product DetailsStd. Pkg. Qty.1Std. Ctn. Weight (lb)0.0000 Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 378.0000Std. Pallet Volume (cf)0.000000RoHS Compliancy Status CompliantPart DescriptionBattery Powered Installation tool for use with the following stainless steel cross section ties:Type MLT and MLTFC: Heavy, extra-heavy, and super-heavyType MLTC: HeavyTypeMLTDH: Extra-Heavy and super-heavyUsed with custom length banding cross sections:Type MB and MBC: Heavy, extra-heavy, and super-heavy2 – 12 volt Lithium-Ion batteries and 220 volt, 50 Hz charger included.Product Type Cable Tie and Custom Length Banding ToolColorBlack/RedPricing DescriptionPower MLT Tool CEWeight (lbs.)3.7Weight (g)1800Used With Cable TiesExtra-heavy and super-heavyUsed.MLT TiesMin. Order Qty.1.0000气动扎带枪 PTH型号：PTH说明PANDUIT CABLE TIE GUN PTHErgonomic lightweight design installs Standard, Heavy-Standard, Light-Heavy, or Heavy cross section cable tiesColor identification: Gray Impact Resistant Resin Housing with Red Selector Knob and Red TriggerWeight: 32.0 oz. (907g).Product DetailsStd. Pkg. Qty. 1 Std. Ctn. Weight (lb) 0.0000 Std. Ctn. Volume (cf)0.0000Std. Pallet Weight (lb) 0.0000 Std. Pallet Volume (cf) 0.000000 RoHS CompliancyStatusRoHS directive is not applicablePart DescriptionErgonomic lightweight design installs Standard, Heavy-Standard, Light-Heavy, or Heavy crosssection cable tiesColor identification: Gray Impact Resistant Resin Housing with Red Selector Knob and Red TriggerWeight: 32.0 oz. (907g).Product Type Cable Tie ToolsMaterial Impact resistant resin housing ColorDark Gray/RedPricing Description Pneumatic Cable Tie Tool for Std, Hvy-Std, Lt-Hvy and Hvy Ties - LeasedPart FeaturesErgonomic design with impact resistant resin housing and red knob; replacement parts can bepart of a scheduled maintenance program.CE Compliant YesWeight (oz.) 32.0Weight (g) 907Used With Cable Ties S, HS, LH, HMin. Order Qty. 1.0000扎带枪 ST3EH型号：ST3EH说明PANDUIT CABLE TIE GUN ST3EHInstalls Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Durable all steel construction with comfortable rubberhandles. Color Identification: Blue handles Weight: 9 oz. (256g)Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 518.4000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status RoHS directive is not applicablePart Description Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Durable all steel construction with comfortable rubber handles. Color Identification: Blue handles Weight: 9 oz. (256g)Pocket catalog part description Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties, Blue handles, 9.0 oz.; durable all steel constructionMaterial Metal with plastic handles Color Blue/BlackDescription Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Durable all steel construction with comfortable rubber handles. Color identification: blue handle grips Body: all black steel Weight: 9 oz. (256g)Pricing Description Cable Tie Tool, Low Volume, For use with Lt-Hvy, Hvy and Extra-Hvy Ties Part Features Durable, all steel construction with comfortable plastic handles.CE Compliant NoWeight (oz.) 9.0Weight (g) 256Used With Cable Ties LH, H, EHMin. Order Qty. 1.0000不锈钢扎带枪 RT2HT∙型号：RT2HT说明PANDUIT CABLE TIE GUN RT2HTInstallation tool for use with the following stainless steel cross section ties:Type MLT, MLTFC, and MLTD:Extra-heavy and super-heavyUsed with custom length banding cross sections:Type MB and MBC: Extra-heavyand super-heavyWidth of tool nose 2.60" (66.0mm).Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 420.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status CompliantPart Description Installation tool for use with the following stainless steel cross section ties:Type MLT, MLTFC, and MLTD: Extra-heavy and super-heavyUsed with custom length banding cross sections:Type MB and MBC: Extra-heavy and super-heavyWidth of tool nose 2.60" (66.0mm).Product Type Cable Tie and Custom Length Banding ToolColor BlackPricing Description Installation Tool, MLT Ties, Controlled Tension, EH & SH Cross SectionCE Compliant NoWeight (oz.) 40Weight (g) 1134Used With Cable Ties Extra-heavy and super-heavyUsed.MLT TiesMin. Order Qty. 1.0000美国panduit（泛达）不锈钢扎带枪 GS4MT∙型号：GS4MT说明PANDUIT CABLE TIE GUN GS4MTInstallation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy,and heavyType MLTC, MLTFC, and MLTD: HeavyUsed with custom length banding cross sections:Type MB:Standard and heavyType MBC: HeavyProduct DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS CompliancyStatusRoHS directive is not applicablePart Description Installation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy, and heavyType MLTC, MLTFC, and MLTD: HeavyUsed with custom length banding cross sections:Type MB: Standard and heavyType MBC: HeavyProduct Type Cable Tie and Custom Length Banding ToolMaterial Metal tool with powder coat finishColor Light Gray/BlackPricing Description Installation Tool, MLT Ties, Controlled Tension Gun Style, S LH H Cross SectionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-3CE Compliant NoWeight (oz.) 19.2Weight (g) 544Used With Cable Ties Standard and heavyType MBC: HeavyMin. Order Qty. 1.0000扎带枪GS2BL型号：GS2BL说明PANDUIT CABLE TIE GUN GS2BLSame as GS2B except handle span is reduced 25% - for workers with smaller hands. Qualified Product Listedper Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A. Color Identification: Black Trigger Handle and SelectorKnob Body: Maroon Metal Housing Weight: 11.5 oz. (327g).Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status RoHS directive is not applicablePart Description Same as GS2B except handle span is reduced 25% - for workers with smaller hands. QualifiedProduct Listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A. Color Identification:Black Trigger Handle and Selector Knob Body: Maroon Metal Housing Weight: 11.5 oz. (327g)Product Type Cable Tie ToolsMaterial Metal tool with powder coat finishColor BurgundyMil. Std. Part Number MS90387-1Pricing Description Cable Tie Tool for M, I, S ties, Small handle span, Adjustable tensionStandards—Part FeaturesMetal tool with a durable powder coat finish. Shorter handle reach (than GS2B) for users withsmaller hands.CE Compliant NoWeight (oz.) 11.5Weight (g) 327Used With Cable Ties M, I, SMin. Order Qty. 1.0000∙美国panduit（泛达）扎带枪 GTSL∙型号：GTSL说明PANDUIT CABLE TIE GUN GTSLSimilar to GTS except shorter handle reach and stroke. Ergonomic design. Installs Subminiature, Miniature,Intermediate and Standard cross section cable ties. Color Identification: Maroon Trigger Handle and SelectorKnob Body: Gray Impact Resistant Resin Housing Weight: 8.8 oz. (249g) Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight(lb)0.0000Std. Pallet Volume(cf)0.000000RoHS CompliancyStatusRoHS directive is not applicablePart Description Similar to GTS except shorter handle reach and stroke. Ergonomic design. Installs Subminiature, Miniature, Intermediate and Standard cross section cable ties. Color Identification: Maroon Trigger Handle and Selector Knob Body: Gray Impact Resistant Resin Housing Weight: 8.8 oz. (249g)Product Type Cable Tie ToolsMaterial Impact resistant resin housingColor Dark Gray/BurgundyMil. Std. Part Number MS90387-1Pricing Description Ergonomic Cable Tie Tool for SM, M, I, S ties, Small handle span, Adj tensionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-5Part FeaturesErgonomic design with impact resistant resin housing, narrow nose, and cushion handle. Shorterhandle reach (than GTS) for users with smaller hands.CE Compliant NoWeight (oz.) 8.8Weight (g) 249Used With CableTiesSM, M, I, SMin. Order Qty. 1.0000∙美国panduit（泛达）扎带枪 GS4EH∙型号：GS4EH说明PANDUIT CABLE TIE GUN GS4EHInstalls Light-Heavy, Heavy and Extra-Heavy cross section cable ties.Color Identification: Blue Trigger Handleand Selector KnobBody: Gray Metal HousingWeight: 16 oz. (454g)Product DetailsStd. Pallet Volume (cf)0.000000Pocket catalog part description Metal Tool; installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties, 16 oz.; blue trigger handleStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000RoHS Compliancy Status RoHS directive is not applicablePart DescriptionInstalls Light-Heavy, Heavy and Extra-Heavy cross section cable ties.Color Identification: BlueTrigger Handle and Selector KnobBody: Gray Metal HousingWeight: 16 oz. (454g)Product Type Cable Tie ToolsMaterial Metal tool with powder coat finishColor Light Gray/BlueMil. Std. Part Number MS90387-4Pricing Description Cable Tie Tool for LH, H, EH ties, Adjustable tensionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-4Part Features Metal tool with a durable powder coat finish.CE Compliant NoWeight (oz.) 16.0Weight (g) 454Used With Cable Ties LH, H, EHMin. Order Qty. 1.0000∙美国panduit（泛达）扎带枪 GTH∙型号：GTH说明PANDUIT CABLE TIE GUN GTHErgonomic design. Installs Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. ColorIdentification: Red Trigger Handle, Cushion Sleeve and Selector Knob Body: Gray Impact Resistant ResinHousing Weight: 12.0 oz. (340g)Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight(lb)0.0000Std. Pallet Volume(cf)0.000000RoHS CompliancyStatusRoHS directive is not applicablePart Description Ergonomic design. Installs Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Color Identification: Red Trigger Handle, Cushion Sleeve and Selector Knob Body: Gray Impact Resistant Resin Housing Weight: 12.0 oz. (340g)Product Type Cable Tie ToolsMaterial Impact resistant resin housingColor Dark Gray/RedMil. Std. Part Number MS90387-2Pricing Description Ergonomic Cable Tie Tool for S, HS, LH, H ties, Adjustable tensionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-2Part Features Ergonomic design with impact resistant resin housing, narrow nose, and cushion handle. CE Compliant NoWeight (oz.) 12.0Weight (g) 340Used With CableTiesS, HS, LH, HMin. Order Qty. 1.0000∙ 美国panduit （泛达）不锈钢扎带枪 ST2MT ∙ 型号：ST2MT说明PANDUIT CABLE TIE GUN ST2MTInstallation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy,heavy and extra-heavyType MLTFC: Standard, heavy and extra-heavyType MLTC and MLT-LPAL: HeavyTypeMLTD: Heavy and extra-heavyUsed with custom length banding cross sections:Type MB: Standard, heavy andextra-heavyType MBC: Heavy and extra-heavyProduct DetailsStd. Pkg. Qty.1 Std. Ctn. Weight (lb)0.0000 Std. Ctn. Volume (cf)0.0000 Std. Pallet Weight (lb)0.0000 Std. Pallet Volume (cf)0.000000RoHS Compliancy Status RoHS directive is not applicablePart DescriptionInstallation tool for use with the following stainless steel cross section ties:Type MLT: Standard,light-heavy, heavy and extra-heavyType MLTFC: Standard, heavy and extra-heavyType MLTCand MLT-LPAL: HeavyType MLTD: Heavy and extra-heavyUsed with custom length bandingcross sections:Type MB: Standard, heavy and extra-heavyType MBC: Heavy and extra-heavyDescriptionUsed with heavy section Pan-Alum™ Type MLT Ties and standard and heavy cross sectionPan-Steel® Type MLT Ties.ColorBlack Pricing DescriptionInstallation Tool, MLT Ties, Twist Cut Off, LH & SH Cross Section Product TypeCable Tie and Custom Length Banding Tool Weight (oz.)16 Weight (g)454 Used With Cable TiesMLT/MLTC/MLTFC/MLTDH Ties. Min. Order Qty. 1.0000∙∙ 气动扎带枪 PTS∙ 型号：PTS说明PANDUIT CABLE TIE GUN PTSErgonomic lightweight design installs Subminiature, Miniature, Intermediate, or Standard cross section cable tiesColor identification: Gray Impact Resistant Resin Housing with Black Selector Knob and TriggerWeight: 17.3 oz. (490g).Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status RoHS directive is not applicablePart Description Ergonomic lightweight design installs Subminiature, Miniature, Intermediate, or Standard cross section cable tiesColor identification: Gray Impact Resistant Resin Housing with Black Selector Knob and TriggerWeight: 17.3 oz. (490g).Product Type Cable Tie ToolsMaterial Impact resistant resin housingColor Dark Gray/BlackPricing Description Pneumatic Cable Tie Tool for Submin, Min, Int, and Std Ties - LeasedPart FeaturesErgonomic design with impact resistant resin housing and black knob;replacement parts canbe part of a scheduled maintenance program.CE Compliant YesWeight (oz.) 17.3Weight (g) 490Used With Cable Ties SM, M, I, SMin. Order Qty. 1.0000∙全自动扎带枪 PAT2S∙型号：PAT2S说明PANDUIT AUTOMATIC CABLE TIE GUN PAT2SLightweight, ergonomic tool headProduct DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb)352.8000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status Compliant in EMEAPart DescriptionLightweight, ergonomic tool head Product TypeAutomatic Cable Tie Tool Length (ft.)— Length (m)— ColorBlack DescriptionTool Head for cable ties up to 2.00" (51mm) bundle diameter (P/N PLT2S-VMR) Pricing DescriptionAutomatic Cable Tie Tool Head for PLT2S-VMR Cable Ties - Plastic Ergo Housing TypeTool Head Used with Installation Tool— CE CompliantYes Max. Bundle Diameter (mm)49 Max. Bundle Diameter (In.)1.94 Weight (lb.)3.23 Weight (g)1470 Used With Cable TiesPLT1.5M-XMR Min. Order Qty. 1.0000∙ 不锈钢扎带枪 RT2HTN ∙ 型号：RT2HTN说明PANDUIT CABLE TIE GUN RT2HTNNarrow nose installation tool for use with the following stainless steel cross section ties:Type MLT, MLTFC, andMLTD: Extra-heavy and super-heavyUsed with custom length banding cross section:Type MB and MBC:Extra-heavy and super-heavyWidth of tool nose 1.06" (27.0mm).Product DetailsStd. Pkg. Qty.1 Std. Ctn. Weight (lb)0.0000 Std. Ctn. Volume (cf)0.0000 Std. Pallet Weight (lb)460.8000 Std. Pallet Volume (cf)0.000000 RoHS Compliancy Status CompliantPart DescriptionNarrow nose installation tool for use with the following stainless steel cross sectionties:Type MLT, MLTFC, and MLTD: Extra-heavy and super-heavyUsed with customlength banding cross section:Type MB and MBC: Extra-heavy and super-heavyWidth oftool nose 1.06" (27.0mm).Product TypeCable Tie and Custom Length Banding Tool ColorBlack Pricing DescriptionInstallation Tool, MLT Ties, Controlled Tension EH & SH Cross Section CE Compliant NoWeight (oz.) 40Weight (g) 1134Used With Cable Ties Extra-heavy and super-heavyUsed.MLT TiesMin. Order Qty. 1.0000∙美国panduit（泛达）扎带枪 GS4H∙型号：GS4H说明PANDUIT CABLE TIE GUN GS4HInstalls Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Qualified Product Listed perMil. Std. MS90387-2 and Mil. Spec. MIL-T-81306A.Color Identification: Red Trigger Handle and SelectorKnobBody: Gray Metal Housing Weight: 16 oz. (454g)Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status RoHS directive is not applicablePart Description Installs Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Qualified Product Listed per Mil. Std. MS90387-2 and Mil. Spec. MIL-T-81306A.Color Identification: Red Trigger Handle and Selector KnobBody: Gray Metal Housing Weight: 16 oz. (454g)Product Type Cable Tie ToolsMaterial Metal tool with powder coat finishColor Light Gray/RedMil. Std. Part Number MS90387-2Pricing Description Cable Tie Tool for S, HS, LH, H ties, Adjustable tensionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-2 Part Features Metal tool with a durable powder coat finish.CE Compliant NoWeight (oz.) 16.0Weight (g) 454Used With Cable Ties S, HS, LH, HMin. Order Qty. 1.0000∙扎带枪GTS∙型号：GTS说明PANDUIT CABLE TIE GUN GTSErgonomic design. Installs Subminiature, Miniature, Intermediate and Standard cross section cable ties. Qualified ProductListed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A.Color Identification: Black Trigger Handle, Cushion Sleeveand Selector KnobBody: Gray Impact Resistant Resin Housing Weight: 9.8 oz. (278g).Product DetailsStd. Pkg. Qty. 1Std. Ctn. Weight (lb) 0.0000Std. Ctn. Volume (cf) 0.0000Std. Pallet Weight (lb) 0.0000Std. Pallet Volume (cf) 0.000000RoHS Compliancy Status RoHS directive is not applicablePart Description Ergonomic design. Installs Subminiature, Miniature, Intermediate and Standard cross section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A.Color Identification: Black Trigger Handle, Cushion Sleeve and Selector KnobBody: Gray Impact Resistant Resin Housing Weight: 9.8 oz. (278g)Product Type Cable Tie ToolsMaterial Impact resistant resin housingColor Dark Gray/BlackMil. Std. Part Number MS90387-1Pricing Description Ergonomic Cable Tie Tool for SM, M, I, S ties, Adjustable tensionStandards QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387-1Part Features Ergonomic design with impact resistant resin housing, narrow nose, and cushion handle.CE Compliant NoWeight (oz.) 9.8Weight (g) 278Used With Cable Ties SM, M, I, SMin. Order Qty. 1.0000扎带枪、扎线枪 GS2B∙型号：GS2B说明PANDUIT CABLE TIE GUN GS2BInstalls Miniature, Intermediate and Standard cross section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 andMil. Spec. MIL-T-81306A. Color Identification: Black Trigger Handle and Selector KnobBody: Gray Metal HousingWeight:11.5 oz. (327g).Product Details。
派克汉尼汾公司版权所有未经许可不能摘录，翻印。
保留修改权利2021年6月警告销售条件本样本中产品和/或系统或相关产品出现故障，选型不当或使用不当，均可能导致人身伤亡和财产损失。
本文档以及由派克·汉尼汾公司及其子公司和授权经销商提供的其他资料，为具有技术知识的用户提供进一步研究所需的产品和/或系统选项。
重要的是，用户必须对您的应用进行全面的分析，并对当前产品样本中与产品或系统相关的资料进行评估。
由于工作条件以及产品或系统的多样性，用户必须自行分析和测试，并独自承担一切后果，包括:产品和系统的最终选型以及确保满足应用的所有性能、安全和警告等方面的要求。
派克·汉尼汾及其子公司可能会随时对本样本中的产品，包括但不限于:产品的特性、产品的规格、产品的结构、产品的有效性以及产品的价格作出变更而不另行通知.本样本中的所有产品均由派克·汉尼汾公司及其子公司和援权经销商销售。
与派克签订的任何销售合同均按照派克标准条件和销售条件中规定的条款执行(提供复印件备索)。
本公司的密封件，只能在本公司的文件资料述及的应用参数范围与接触介质、压力、温度和存放时间相一致的情况下才能使用。
在规定的应用参数范围外使用以及错误选用不同的材料都可能导致密封件寿命的缩短以及设备的损坏，甚至更严重的后果(如生命安全，环境污染等)。
样本中所列出的工作压力、温度范围、运动速度是极限值，它们之间相互关联、相互影响；在极端的工况下，建议不要同时把各个参数都同时用到极限值。
对于特殊的要求（压力、温度、速度、介质等），请联系派克汉尼汾公司以咨询合适的密封结构、材料、配置、安装建议等。
由于诸多工作参数会影响到流体传动系统及密封元件，这些设备的制造商必须在实际工作条件下测试、验证并批准密封系统的功能与可靠性。
此外，对于不断出现的新的介质（液压油、润滑脂、清洗剂等)，用户特别注意它们与目前所用的密封件弹性体材料的兼容性。
我们建议用户在大批量应用之前，在厂内或现场先做密封材料的兼容性能测试，作为密封产品与系统供应商，我们建议用户遵循我们的这些建议。
1P o w e r P r o d u c t sBM Series fuse blocks are compatible with the Edison MCL, MEQ, MEN, and MOL and for use with any 13⁄32 x 11⁄2" fuses.SpecificationScLaSS M SUppLeMentaRY fUSeBLocKSconstruction: Thermoplastic, UL flammability; 94VRatings: 600 Vac, 30 A agency approvals:UL Recognized, Guide IZLT2, File E14853; CSA, Class 6225-01, File 47235These R250 Series fuse blocks are compatible with Class R fuses, such as: Edison LENRK and ECNR.The FP-2 and FP-3 are tools tohelp easily remove fuses. FP-2 is for 13⁄32 to 13⁄16" diameter fuses. FP-3 is for 1 to 13⁄4" diameter fuses.R250 SeriesNote: SR is a Screw type, clip with reinforced spring, CR is a Box lug type, clip with reinforced es with instruction sheet.Ordering Examples: R25030-1SR, screwtype fuse block, 1 pole.R25060-2CR, box lug type 2-pole fuse block.To Order Model No. descriptioN - Fuse diaMeters aNd types Fp-2 13⁄32 to 13⁄16", 0 to 60 A, 250V and 0 to 30 A, 600V Fp-31 to 13⁄4", 70 to 200 A, 250V and 35 to 200 A, 600VComes with instruction sheet.Ordering Example: FP-2, 13⁄32 to 13⁄16" fuse puller.FP Seriesshown smaller than actual size.shown smaller than actual size.shown smaller than actual size.Fp-2Fp-3Fuse AccessoriesBM SeriesSpecificationSconstruction: Thermoplastic, UL flammability; 94 Vampere Ratings: 1⁄10 to 600 A Voltage Ratings: R250, 250 Vac agency approvals: UL Listed, Guide IZLT, File E14853; CSA, Class 6225-01, File 47235To Order Model No. poles BM6031pQ 1 BM6032pQ 2 BM6033pQ3Ordering Example: BM6032PQ, 2 pole fuse blocks.To Order Model No.poles Fuse BlocK accessories For 250V r25030-1sr 1 r25030-2sr 2 r25030-3sr 3 r25060-1cr 1 r25060-2cr 2 r25060-3cr3Fusepullers。
Dual Output TypesRxxG055/12±5±1007127RxxG095/12±9±557435DIP14 RxxG125/12±12±427542RxxG155/12±15±337641RxxG0524/48±5±10080/7045RxxG0924/48±9±557052/58DIP14 RxxG1224/48±12±427065/68RxxG1524/48±15±337070/75RxxH055/12±5±1007127RxxH095/12±9±557435SIP7 RxxH125/12±12±427542RxxH155/12±15±337641RxxH0524/48±5±10070/8045RxxH0924/48±9±557052/58SIP7 RxxH1224/48±12±427065/68RxxH1524/48±15±337070/75Absolute Maximum RatingsInput Voltage V IN5V types 7V typ.12V types 15V typ.24V types 24V typ.48V types48V typ.Short Circuit Duration 1)1s Internal Power Dissipation560mW Lead Temperature (1.5 mm from case for 10 seconds)300 °C1).Supply voltage must be discontinued at the end of the short circuit duration.Input Voltage Range V IN (continuous operation)5V input types 4.5VDC min./ 5.5VDC max.12V input types 10.8VDC min./ 13.2VDC max.24V input types 28VDC max.48V input types54VDC max.Reflected Ripple Current (depending on the type)20 mA p-p min.to 40 mA p-p max.Voltage Set Point Accuracy See Tolerance EnvelopeLine Regulation1.0% / 1.2% of V INLoad Voltage Regulation (10% load to 100% full load)single output types 6.7% min./ 15% max.dual output types 6.8% min./ 10% max.Ripple & Noise (20MHz band limited)single output types 32mVp-p min./ 80mVp-p max.dual output types24mVp-p min./ 40mVp-p max.Isolation Voltage (for 1 minute)3000VDC min.Test Voltage (50Hz,10 seconds)3000 Vpk min.Resistance (Viso = 1000V)10 G Ωtyp.Switching Frequency at Full Load (depending on the type)V IN 5V output types 120kHz min./ 135kHz max.V IN 12V output types 150kHz min./ 170kHz max.V IN 24V output types 150kHz max.V IN 48V output types150kHz max.Package Weight2.11 gOperating Temperature Range (all output types)–40°C min.to +85°C max.(see graph)Storage Temperature Range–50°C min.+125°C max.Case Temperature Above Ambient (depending on the type)5V output types+28°C max.all other output types +25°C max.MTTF 1) (depending on the type)–40°C,single output types 303kHrs min./ 2938kHrs max.+25°C,single output types 252kHrs min./ 2414kHrs max.+85°C,single output types 212kHrs min./ 1961kHrs max.–40°C,dual output types 185kHrs min./ 2068kHrs max.+25°C,dual output types 154kHrs min./ 1697kHrs max.+85°C,dual output types130kHrs min./ 1368kHrs max.1).Calculated using MIL-HDBK-217F with nominal input voltage at full load.Please contact us,if you need exact parameters for the converter you have selected.Electrical Specifications (measured at T A = 25°C,at nominal input voltage and rated output current unless otherwise specified)Package Style and Pinning (mm)。
德国真空泵型号普旭真空泵型号：RA0040F,RA0063F，RA0100F,RA0160D,RA0202D,RA0250D,RA0302DBUSCH 普旭R5 系列单级旋片式RA/RB/RCR5-0021,R5-0025,R5-0040F,R5-0100F,R5-0160D,R5-0202D,R5-0250D,R5-0302D, ,R5-0305, R5-0400，,R5-0063，R5-0065,R5-1000, R5-1600, R5-0165, R5-0205,R5-0255,R5-0400,R5-0502,R5-06300025F 0040F 0063F 0100F 0160D 0202D 0250D 0302D 0400B 0502B 0630B 1000B 1600B莱宝真空泵型号：SV25B,SV65B,SV40B,SV100B,SV300,SV200SOGEV AC单级系列SV 10B, SV 16B, SV 25B, SV 40B, SV 65B, SV 100B, SV 16, SV 25, SV 200, SV 300, SV 500, SV 630, SV 630F, SV 750, SV 1200TRIV AC 双极系列D2A, D4A, D8A, D16A, D30A, D60A, D1.6B, D4B, D8B, D16B, D25B, D40B, D65B, D16BCS, D25BCS, D40 BCS, S40BCS, S65BCS, D65BCS,D2C, D4C, D8C, D16C, D30C, D60C里其乐真空泵型号：VC50,VC75,VC100,VC150,VC202,VC303油润滑旋片式真空泵系列VC VCA VCAH VCB VCEH VCE VCH VGD系列20, 10，15，25，50，60，40 ,75 , 100,160,165,190,250,200，300，400,500,600,63010，15，25，50，60，40 ,75 , 100,160,165,190,250,200，300，400,500,600,630RIETSCHLE里其乐CLF、CLFD、CLFDE、CLFE、CLFG、CLFEH、CLFH、CLFT系列11,26,41,61,81,101;DCLF、RIETSCHLE里其乐DCLF…D、DCLF…DV 、DCLFD…DVVLS系列40,60,80,100,130,400,600,800,1000RIETSCHLE里其乐无油旋片式真空泵/压缩机系列VL、VLB、VLR、VLT、VLV、VTA、VTB、VTE、DTA、DTB、DTE、KTA、KLT系列10,15,25,40,60,80,100,140,3,6,8,180,250,340,500贝克真空泵型号：U4.20,U4.40,U4.70,U4.100,U4.165，U4.190，U4.250U4.400，U4.630BECKER贝克旋叶式真空泵油润滑U2系列/ U3系列/ U4系列20,40,70,100,165,190,250,400,630BECKER贝克VT4系列/ T4系列/ DT系列4,8,10,16,25,40;BECKER贝克KVT3系列/ DVT3系列60,80,100,140;BECKER贝克VTLF系列/ DTLF系列200,250,360,400,500VT4.4 VT4.8 VT4.10 VT4.16 VT4.40 U3.6 U4.20 U4.40 U4.70F/K U4.70F/K U4.100SA/K U4.100F/K U4.165SA/K U4.165F/K U4.190SA/K U4.190F/K U4.250 SA/K U4.250F/K贝克无油旋片式VT4.4 VT4.8 VT4.10 VT4.16 VT4.40 VT4.25 KVT3.60 KVT3.80 KVT3.100 KVT3.140。
