【免费下载】美国药典色谱柱型号对照

USP Category match of TSKgelCategory Particle Size Bonding DescriptionTSKgel5to 10Octadecyl silane chemically bonded to porous silica or ceramic particle.TSKgel ODS-100S 80TS 80TM 120A 120T L1 5 to 10C18Octadecyl silane chemically bonded to porous silica or ceramic particle.TSKgel ODS-100S, 80TS, 80TM, 120A, 120T L230 to 50C18Octadecyl silane chemically bonded to silica gel of a controlled surface prosity that has beenbonded to a solid spherical core.NoneL3 5 to 10None Porous silica microparticles.TSKgel Silica-60,150L430 to 50Silica Silica gel of controlled surface porosity bonded ro a solid spherical core.None L530 to 50Alumina Alumina of controlled surface porosity bonded to a solid spherical core.None L630 to 50Cation ExchangeStrong cation-exchange packing-sulfonated fluorocarbon polymer coated on a solid spherical core.NoneL7 5 to 10C8Octyl silane chemically bonded to totally porous microsilica particles.TSKgel Octyl-80TS y y y p pg y L810NH2An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support.TSKgel Amide-80, NH2-60L910Cation Exchange Irregular, totally porous silica gel having a chemically bonded, strong acidic cation-exchange coating.TSKgel CM-3SW L10 5 to 10Nitrile Nitrile groups chemically bonded to porous silica microparticles.None L11 5 to 10PhenylPhenyl groups chemically bonded to porous silica particles.None L1230 to 50Anion Exchange Strong anion-exchange packing-quaternary amine bonded on a solid spherical NoneL13 5 to 10Trimethylsilane Trimethylsilane chemically bonded to porous silica microparticles.TSKgel TMS-250A i E hSili l h i h i ll b d d t l b i t i TSK l QAE 2SW (5)L1410Anion Exchange Silica gel having a chemically bonded, strongly basic quaternary ammonium.TSKgel QAE-2SW (5um)L15 3 to 10C6Hexyl silane chemically bonded to totally porous silica particles.None L16 5 to 10Dimethylsilane Dimethylsilane chemically bonded to porous silica particles.None L177 to 11Cation ExchangeStrong cation-exchange resin consisting cross-linked stylene-divinylbenzene copolymer in the hydrogen form.SCX (5um)L18 5 to 10NH2/CN Amino and cyano groups chemically bonded to porous silica particles.TSKgel CN-80TS, NH2-60L199Cation Exchange Strong cation-exchange resin consisting of sulfonated cross-linked stylene-divinylbenzene copolymer in the calcium form.NoneL205to 10DihydroxypropaneDihydroxypropane groups chemically bonded to porous silica particles 5 to 10Dihydroxypropane groups chemically bonded to porous silica particles.NoneL21 5 to 10None A rigid, spherical stylene-divinylbenzene copolymer.TSKgel HXL,HHR series L2210Cation Exchange Cation-exchange resin made of porous polystylene gel with sulfonic acid groups, about 10 um size.TSKgel SP-5PWL2310Anion ExchangeAnion exchange resin made of porous polymethacrylate gel with quaternary ammonium groups.TSKgel SuperQ-5PW, BioAssist Q L2432 to 63None A semi-rigid hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrix surface.NonePacking having the capacity to separate compounds with a molecular range L25no ｔ specified None g g p y p p gfrom 100 to 5000 (as determined by polyethylene oxide), applied to neutral, anionic, and cationic water-soluble polymers. A polymethacrylate resin base, cross-linked with plyhydroxylated ether (surface contained some residual functional groups) was found suitable.TSKgel G2500PWXL, G2500PW, Alpha-2500L26 5 to 10C4Butyl silane chemically bonded to totally porous silica particles.None L2730 to 50None Porous silica microparticles.None L28not specifiedC8/NH2A multifunctional support, which consists of a high purity, 100 angstromspherical silica substrate that has been bonded with anionic (amine) functionality in addition to a conventional reversed phase C8 functionality.NoneL295PolybutadieneGamma alumina, reversed phase, low carbon percentage by weight,alumina-based polybutadiene spherical particles, with a pore diameter of 80 angstrom units.None L30 3 to 10C2Ethyl silane chemically bonded to totally porous silica particles.None L318.5Anion ExchangeA strong anion-exchange resin-quaternary amine bonded on latex particlesattached to a core of macroporous particles having a pore diameter of 2000 angstrom units and consisiting of ethylvinylbenzene cross-linked with 55% divinylbenzene.NoneUSP Category match of TSKgelL32 5 to 10Chiral LigandA chiral ligand-exchange packing: L-proline copper complex covalently bonded to irregularly shaped silica particles.TSKgel Enantio L1L33not specifiedNone Packing having the capacity to separate proteins by molecular size of4,000 to 400,000 daltons. It is spherical, silica-based, over a range and processed to provide pH stability TSKgel G3000SWXL, G3000SW L349SulfonatedStrong cation-exchange resin consisting of sulfonated cross-linked stylene-divinylbenzene copolymer in the lead form.SCX (5um)L35not specifieddiolA zirconium-stabilised spherical silica packing with a hydrophilic (diol-type) molecular monolayer bonded ohaseNone L365 A 3,5-dinitrobenzoyl derivative of L-phenylglycine covalently bonded to 5um aminopropyl slica.NoneL37not specified NonePolymethacrylate gel packing having the capacity to separate proteins by molecular size over a range of 2,000 to 40,000 daltons.G3000PW,PWXL, Alpha-3000L38not specified None A methacrylate-based size-exclusion packing for water-soluble samples.PW, PWXL, Alpha series L39not specified NoneA hydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.PW, PWXL, Alpha series L40 5 to 20Dimethyl phenylcarbamateCellulose tris-3,5-dimethylphenylcarbamater coated porous silica particle 5 to 20um in a diameter None L415Amino-glycoproteinImmobilized 1-acid glycoprotein on spherical silica particlesNone C8&C18Octylsilane and octadecylsilane groups chemically bonded to porous silica particles L425C8 & C18Octylsilane and octadecylsilane groups chemically bonded to porous silica particles.None L43 5 to 10PentafluorophenylPentafluorophenyl groups chemically bonded to silica particles.L44not specified Sulfonic/C8A multifunctional support, which consists of a high purity, 60 angstromspherical silica substrate that has been bonded with cationic exchanger,sulphonil functionality in addition to a conventional reversed phase C8 functionality.NoneL45 5 to 10Betacycludextrin Beta cyclodextrin bonded to porous silica particles.None L4610Quaternary amine Polystyrene/divinylbenzene substrate agglomerated with quaternary amine functionalized latex beads.NoneL478Anion Exchange High capacity anion exchange microporous substrate, dimension 250 x 4.mm.SP-2SW, QAE-2SW, CM-2SW, DEAE-2SW L4815Sulfonated Sulfonated, cross-linked polystyrene with an outer layer of sub-micron porous, anion exchange.Sulfonated, cross linked polystyrene with an outer layer of sub micron porous, anion exchange.None L49 5 to 10Amylose tris-3,5-dimethylphenylcarbamateAmylose tris-3,5-dimethylphenylcarbamate-coated, porous, spherical silica.None L505 to 10SulfopropylA strong cation exchange resin made of porous silica with sulfopropyl groups.SP-2SW。

USP药典L1～L60对应色谱柱下面分别是USPL1～L60的对映。

L1—Octadecyl silane chemically bonded to porous silica or ceramic micro-particles,3to 10μm in diameter.L2—Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core,30to 50μm in diameter.L3—Porous silica particles,5to 10μm in diameter.L4—Silica gel of controlled surface porosity bonded to a solid spherical core,30to 50μm in di ameter.L5—Alumina of controlled surface porosity bonded to a solid spherical core,30to 50μm in diameter.L6—Strong cation-exchange packing–sulfonated fluorocarbon polymer coated on a solid spherical core,30to 50μm in diameter.L7—Octylsilane chemically bonded to totally porous silica particles,3to 10μm in diameter.L8—An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support,10μm in diameter.L9—10-μm irregular or spherical,totally porous silica gel having a chemically bonded,strongly acidic cation-exchange coating.L10—Nitrile groups chemically bonded to porous silica particles,3to 10μm in diameter.L11—Phenyl groups chemically bonded to porous silica particles,5to 10μm in diameter.L12—Astrong anion-exchange packing made by chemically bonding a quaternary amine to a solid silica spherical core,30to50μm in diameter.L13—Trimethylsilane chemically bonded to porous silica particles,3to 10μm in diameter.L14—Silica gel 10μm in diameter having a chemically bonded,strongly basic quaternary ammonium anion-exchange coating.L15—Hexylsilane chemically bonded to totally porous silica particles,3to 10μm in diameter.L16—Dimethylsilane chemically bonded to porous silica particles,5to 10μm in diameter.L17—Strong cation-exchange resin consisting of sulfonated cross-linkedstyrene-divinylbenzene copolymer in the hydrogen form,7to 11μm in diameter.L18—Amino and cyano groups chemically bonded to porous silica particles,3to 10μm in diameter.L19—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form,about 9μm in diameter.L20—Dihydroxypropane groups chemically bonded to porous silica particles,5to 10μm in diameter.L21—Arigid,spherical styrene-divinylbenzene copolymer,5to 10μm in diameter.L22—Acation-exchange resin made of porous polystyrene gel with sulfonic acid groups,about 10μm in size.L23—An anion-exchange resin made of porous polymethacrylate or polyacrylate gel with quaternary ammonium groups,abou t 10μm in size.L24—Asemi-rigid hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrixsurface,32to 63μm in diameter.5L25—Packing having the capacity to separate compounds with a molecular weight range from 100–5000(as determined by polyethylene oxide),applied to neutral,anionic,and cationic water-soluble polymers.Apolymethacrylate resin base,cross-linked with polyhydroxylated ether (surface contained some residual carboxyl functional groups)was found suitable.L26—Butyl silane chemically bonded to totally porous silica particles,5to 10μm in diameter.L27—Porous silica particles,30to 50μm in diameter.L28—Amultifunctional support,which consists of a high purity,100?,spherical silica substrate that has been bonded with anionic exchanger,amine functionality in addition to a conventional reversed phase C8functionality.L29—Gamma alumina,reverse-phase,low carbon percentage by weight,alumina-based polybutadiene spherical particles,5μm in diameter with a pore volume of 80?.L30—Ethyl silane chemically bonded to totally porous silica particles,3to 10μm in diameter.L31—Astrong anion-exchange resin-quaternary amine bonded on latex particles attached to acore of 8.5-μm macroporous particles having a pore size of 2000?and consisting of ethylvinylbenzene cross-linked with 55%divinylbenzene.L32—Achiral ligand-exchange packing–L-proline copper complex covalently bonded to irregularly shaped silica particles,5to 10μm in diameter.L33—Packing having the capacity to separate dextrans by molecular size over a range of 4,000to 500,000Da.It is spherical,silica-based,and processed to provide pHstability.6L34—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form,about 9μm in diameter.L35—Azirconium-stabilized spherical silica packing with a hydrophilic (diol-type)molecular monolayer bonded phase having a pore size of 150?.L36—A3,5-dinitrobenzoyl derivative of L-phenylglycine covalently bonded to 5-μm aminopropyl silica.L37—Packing having the capacity to separate proteins by molecular size over a range of 2,000to 40,000Da.It is a polymethacrylate gel.L38—Amethacrylate-based size-exclusion packing for water-soluble samples.L39—Ahydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.L40—Cellulose tris-3,5-dimethylphenylcarbamate coated porous silica particles,5to 20μm in diameter.L41—Immobilized a1-acid glycoprotein on spherical silica particles,5μm in diameter.L42—Octylsilane and octadecylsilane groups chemically bonded to porous silica particles,5μm in diameter.L43—Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer,5to 10μm in diameter.L44—Amultifunctional support,which consists of a high purity,60?,spherical silica substrate that has been bonded with a cationic exchanger,sulfonic acid functionality in addition to a conventional reversed phase C8functionality.L45—Beta cyclodextrin bonded to porous silica particles,5to 10μm in diameter.L46—Polystyrene/divinylbenzene substrate agglomeratedwith quaternary amine functionalized latex beads,10μm in diameter.L47—High-capacity anion-exchange microporous substrate,fully functionalized with trimethlyamine groups,8μm in diameter.7L48—Sulfonated,cross-linked polystyrene with an outer layer of submicron,porous,anion-exchange microbeads,15μm in diameter.L49—Areversed-phase packing made by coating a thin layer of polybutadiene onto spherical porous zirconia particles,3to 10μm in diameter.8L50—Multifunction resin with reversed-phase retention and strong anion-exchange functionalities.The resin consists of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15μm in diameter,and a surface area not less than 350m2per g.Substrate is coated with quaternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene.9L51—Amylose tris-3,5-dimethylphenylcarbamate-coated,porous,spherical,silica particles,5to 10μm in diameter.10 L52—Astrong cation exchange resin made of porous silica with sulf opropyl groups,5to 10μm in diameter.11L53—Weak cation-exchange resin consisting of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15μm diameter.Substrate is surface grafted with carboxylic acid and/or phosphoric acid functionalized mo nomers.Capacity not less than 500μEq/column.12L54—Asize exclusion medium made of covalent bonding of dextran to highly cross-linked porous agarose beads,about 13μm in diameter.13L55—Astrong cation-exchange resin made of porous silica coated with polybutadiene–maleic acid copolymer,about 5μm in diameter.14L56—Isopropyl silane chemically bonded to totally porous silica particles,3to 10μm in diameter.15L57—Achiral-recognition protein,ovomucoid,chemically bonded to silica particles,about 5μmin diameter,with a pore size of 120?.L58—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form,about 7to 11μm in diameter.16L59—Packing having the capacity to separate proteins by molecular weight over the range of 10to 500kDa.It is spherical (10μm),silica-based,and processed to provide hydrophilic characteristics and pHstability.17USP28L60—Spherical,porous silica gel,3or 5μm in diameter,the surface of which has been covalently modified with palmitamidopropyl groups and endcapped with acetamidopropyl groups to a ligand density of about 6μmoles per m2.18USP28。

L1—Octadecyl silane chemically bonded to porous silica or ceramic micro-particles,3to 10µm in diameter. L2—Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core,30to 50µm in diameter.L3—Porous silica particles,5to 10µm in diameter. L4—Silica gel of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter. L5—Alumina of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter. L6—Strong cation-exchange packing–sulfonated fluorocarbon polymer coated on a solid spherical core,30to 50µm in diameter. L7—Octylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter. L8—An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support,10µm in diameter. L9—10-µm irregular or spherical,totally porous silica gel having a chemically bonded,strongly acidic cation-exchange coating. L10—Nitrile groups chemically bonded to porous silica particles,3to 10µm in diameter.L11—Phenyl groups chemically bonded to porous silica particles,5to 10µm in diameter.L12—Astrong anion-exchange packing made by chemically bonding a quaternary amine to a solid silica spherical core,30to 50µm in diameter. L13—Trimethylsilane chemically bonded to porous silica particles,3to 10µm in diameter. L14—Silica gel 10µm in diameter having a chemically bonded,strongly basic quaternary ammonium anion-exchange coating. L15—Hexylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter. L16—Dimethylsilane chemically bonded to porous silica particles,5to 10µm in diameter.L17—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen form,7to 11µm in diameter.L18—Amino and cyano groups chemically bonded to porous silica particles,3to 10µm in diameter. L19—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form,about 9µm in diameter. L20—Dihydroxypropane groups chemically bonded to porous silica particles,5to 10µm in diameter. L21—Arigid,spherical styrene-divinylbenzene copolymer,5to 10µm in diameter.L22—Acation-exchange resin made of porous polystyrene gel with sulfonicacid groups,about 10µm in size. L23—An anion-exchange resin made of porous polymethacrylate or polyacrylate gel with quaternary ammonium groups,about 10µm in size. L24—Asemi-rigid hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrix surface,32to 63µm in diameter.5 L25—Packing having the capacity to separate compounds with a molecular weight range from 100–5000(as determined by polyethylene oxide),applied to neutral,anionic,and cationic water-soluble polymers.Apolymethacrylate resin base,cross-linked with polyhydroxylated ether (surface contained some residual carboxyl functional groups)was found suitable. L26—Butyl silane chemically bonded to totally porous silica particles,5to 10µm in diameter. L27—Porous silica particles,30to 50µm in diameter. L28—Amultifunctional support,which consists of a high purity,100Å,spherical silica substrate that has been bonded with anionic exchanger,amine functionality in addition to a conventional reversed phase C8functionality. L29—Gamma alumina,reverse-phase,low carbon percentage by weight,alumina-based polybutadiene spherical particles,5µm in diameter with a pore volume of 80Å. L30—Ethyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter. L31—Astrong anion-exchange resin-quaternary amine bonded on latexparticles attached to a core of 8.5-µm macroporous particles having a pore size of 2000Åand consisting of ethylvinylbenzene cross-linked with 55%divinylbenzene.L32—Achiral ligand-exchange packing–L-proline copper complex covalently bonded to irregularly shaped silica particles,5to 10µm in diameter. L33—Packing having the capacity to separate dextrans by molecular size over a range of 4,000to 500,000Da.It is spherical,silica-based,and processed to provide pHstability.6 L34—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form,about 9µm in diameter. L35—Azirconium-stabilized spherical silica packing with a hydrophilic (diol-type)molecular monolayer bonded phase having a pore size of 150Å. L36—A3,5-dinitrobenzoyl derivative of L-phenylglycine covalently bonded to 5-µm aminopropyl silica. L37—Packing having the capacity to separate proteins by molecular size over a range of 2,000to 40,000Da.It is a polymethacrylate gel. L38—Amethacrylate-based size-exclusion packing for water-soluble samples. L39—Ahydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.L40—Cellulose tris-3,5-dimethylphenylcarbamate coated porous silica particles,5to 20µm in diameter. L41—Immobilized a1-acid glycoprotein on spherical silica particles,5µm indiameter.L42—Octylsilane and octadecylsilane groups chemically bonded to porous silica particles,5µm in diameter. L43—Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer,5to 10µm in diameter. L44—Amultifunctional support,which consists of a high purity,60Å,spherical silica substrate that has been bonded with a cationic exchanger,sulfonic acid functionality in addition to a conventional reversed phase C8functionality. L45—Beta cyclodextrin bonded to porous silica particles,5to 10µm in diameter.L46—Polystyrene/divinylbenzene substrate agglomerated with quaternary amine functionalized latex beads,10µm in diameter. L47—High-capacity anion-exchange microporous substrate,fully functionalized with trimethlyamine groups,8µm in diameter.7 L48—Sulfonated,cross-linked polystyrene with an outer layer of submicron,porous,anion-exchange microbeads,15µm in diameter. L49—Areversed-phase packing made by coating a thin layer of polybutadiene onto spherical porous zirconia particles,3to 10µm in diameter.8 L50—Multifunction resin with reversed-phase retention and strong anion-exchange functionalities.The resin consists of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm in diameter,and a surface area not less than 350m2per g.Substrate is coatedwith quaternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene.9 L51—Amylosetris-3,5-dimethylphenylcarbamate-coated,porous,spherical,silica particles,5to 10µm in diameter.10 L52—Astrong cation exchange resin made of porous silica with sulfopropyl groups,5to 10µm in diameter.11 L53—Weak cation-exchange resin consisting of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm diameter.Substrate is surface grafted with carboxylic acid and/or phosphoric acid functionalized monomers.Capacity not less than 500µEq/column.12 L54—Asize exclusion medium made of covalent bonding of dextran to highly cross-linked porous agarose beads,about 13µm in diameter.13 L55—Astrong cation-exchange resin made of porous silica coated with polybutadiene–maleic acid copolymer,about 5µm in diameter.14 L56—Isopropyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter.15 L57—Achiral-recognition protein,ovomucoid,chemically bonded to silica particles,about 5µm in diameter,with a pore size of 120Å. L58—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form,about 7to 11µm in diameter.16L59—Packing having the capacity to separate proteins by molecular weight over the range of 10to 500kDa.It is spherical (10µm),silica-based,and processed to provide hydrophilic characteristics and pHstability.17USP28 L60—Spherical,porous silica gel,3or 5µm in diameter,the surface of which has been covalently modified with palmitamidopropyl groups and endcapped with acetamidopropyl groups to a ligand density of about 6µmoles per m2.18USP28L1是C18柱L1：十八烷基键合多孔硅胶或无机氧化物微粒固定相，简称ODS柱L2：30～50mm表面多孔薄壳型键合十八烷基固定相，简称C18柱L3：多孔硅胶微粒，即一般的硅胶柱L4：30～50mm表面多孔薄壳型硅胶柱L5：30～50mm表面多孔薄壳型氧化铝柱L6：30～50mm实心微球表面包覆磺化碳氟聚合物，强阳离子交换柱L7：全多孔硅胶微粒键合C8官能团固定相，简称C8柱L8：全多孔硅胶微粒键合非交联NH2固定相，简称NH2柱L9：强酸性阳离子交换基团键合全多孔不规则形硅胶固定相，即SCX柱L10：多孔硅胶微球键合氰基固定相（CN），简称CN柱L11：键合苯基多孔硅胶微球固定相，简称苯基柱L12：无孔微球键合季胺功能团的强阴离子交换柱L13：三乙基硅烷化学键合全多孔硅胶微球固定相（C1），简称C1柱L14：10mm硅胶化学键合强碱性季铵盐阴离子交换固定相，简称SAX柱L15：已基硅烷化学键合全多孔硅胶微球固定相，简称C6柱L16：二甲基硅烷化学键合全多孔硅胶微粒固定相C2柱L17：氢型磺化交联苯乙烯-二乙烯基苯共聚物,强阳离子交换柱L18：3～10mm全多孔硅胶化学键合胺基（NH2）和氰基（CN）柱L19：钙型磺化交联苯乙烯－二乙烯基苯共聚物，强阳离子交换柱L20：二羟基丙烷基化学键合多孔硅胶微球固定相（Diol），简称二醇基柱L21：刚性苯乙烯－二乙烯基苯共聚物微球填料柱L22：带有磺酸基团的多孔苯乙烯阳离子交换柱L23：带有季胺基团的聚甲基丙烯酸甲酯或聚丙烯酸酯多孔离子交换柱L24：表面含有大量羟基的半刚性聚乙烯醇亲水凝胶柱L25：聚甲基丙烯酸酯树脂交联羟基醚（表面含有残余羧基功能团）树脂。

美国药典USP气相色谱柱对照表美国药典USP气相色谱柱对照表L62 C30硅胶键合于完全多孔球状硅胶，粒径3~15μm。

G48 Highly polar, partially cross-linked cyanopolysiloxane.Rt-2560G46 14% 氰丙基苯基- 86% 甲基聚硅氧烷CB-1701MXT?-1701Rtx?-1701VF-1701ms OV-1701CBX-1701DB-1701DB-1701P G43 6% 氰丙基苯基- 94% 二甲基聚硅氧烷MXT?-624DB-624MXT?-Volatiles CBX-1301 MXT?-1301OV-1301CB-624Rtx?-1301 VF-624ms/VF-1301ms Rtx?-624CB-1301CBX-624 G42 35% 苯基- 65% 二甲基乙烯聚硅氧烷DB-35Rtx?-35MXT?-35CBX-35HP-35DB-35MSG38 固定相G1 加减尾剂MXT-1Rtx?-1MS Rtx?-1G36 1% 乙烯基- 5% 苯基甲基聚硅氧烷Rtx?-5MS Rtx?-5CBX-5MXT?-5G35 聚乙二醇和硝基对苯二甲酸二乙二醇酯DB-FFAP HP-FFAP CB-FFAPG32 20% Phenylmethyl-80% dimethylpolysiloxane.MXT?-20G27 5% 苯基- 95% 甲基聚硅氧烷CB-5XTI?-5Rtx?-5SIL MS VF-5msRtx?-5PONA HP-5MS HP-5DB-5MSSE-52DB-5SE-54G25 聚乙二醇TPA（Carbowax 20M 对苯二酸）FFAP CBX-FFAPG19 25% 苯基- 25% 氰丙基甲基聚硅氧烷OV-225Rtx?-225VF-23ms CBX-225G17 75% 苯基- 25% 甲基聚硅氧烷MXT?-65G16 聚乙二醇（平均分子量15,000）DB-WAX CBX-Wax CB-WAX Stabilwax?PEG-20M Stabilwax?-DB Stabilwax?-DA MXT?-WAXG15 聚乙二醇（平均分子量3000－3700）Rtx?-WaxG14 聚乙二醇（平均分子量950－1050）VF-WAXmsG8 90％3氰基丙基－10％苯基甲基聚硅氧烷HP-88Rtx?-2330G7 50%-3-氰丙基聚硅氧烷-50%苯甲基硅氧烷DB-225CB-225G6 三氟丙基甲基聚硅氧烷MXT?-200Rtx?-200G5 3-氰丙基聚氧硅烷DB-23G3 50%苯基-50%甲基聚硅氧烷(50% Phenyl-50% methylpolysiloxane)DB-17HT Rtx?-50Rtx?-17VF-17msMXT?-50DB-17MS CBX-17HP-50+DB-17CB-17VF-Xms OV-17G2 二甲基聚硅烷胶（Dimethylpolysiloxane Gum)CB-1MXT?-1HT Sim Dist HP-1DB-1MSCB-101VF-1ms DB-1MXT?-1 Sim DistHP-PONAG1 二甲基聚硅氧烷油（Dimethylpolysiloxane oil)SE-30CBX-1CB-101CB-PONARtx?-1PONA OV-101OV-1CB-TVOC0 其他分类(气相填充柱色谱柱)L1 十八烷基硅烷化学键合到多孔硅胶或陶瓷微粒，粒径为1.5 到10 μmL10 腈基化学键合到多孔硅胶颗粒，粒径为3 到10 μmL11 苯基化学键合到多孔硅胶颗粒，粒径为1.5 到10 μmL14 具有化学键合的、强碱性季铵阴离子交换涂层的硅胶，粒径为10 μmL18 氨基和氰基化学键合到多孔硅胶颗粒，粒径为5 到10 μmL2 十八烷基硅烷化学键合到表面孔隙度可控制的多孔硅胶（已键合到固体球形核），粒径为3到50 μm L20 二羟基丙烷基化学键合到多孔硅胶颗粒，粒径为3 到10 μmL3 多孔硅胶颗粒，粒径为5 到10 μmL56 丙基硅烷化学键合到全多孔硅胶颗粒，粒径为3 到10 μmL7 辛基硅烷化学键合到全多孔微硅胶颗粒，粒径为1.5 到10 μm L8 氨丙基硅烷以单分子层形式化学键合到多孔硅胶载体上，粒径为10 μmS10 丙烯晴和二乙烯基苯高交联共聚物S1A 硅藻土S2 苯乙烯－二乙烯基苯共聚物：比表面小于50m2/g，平均孔径0.3-0.4umS3 苯乙烯－二乙烯基苯共聚物：比表面为50－6000m2/g，平均孔径0.0075umS4 苯乙烯－二乙烯基苯共聚物（含-O和-N）：比表面为400－600m2/g，平均孔径0.0076umS6 苯乙烯－二乙烯基苯共聚物：比表面为250－350m2/g，平均孔径0.0091umS7 石墨化碳比表面12 m2/gS8 4-乙烯吡啶和苯乙烯二乙烯基苯共聚物G0 其他分类CB-AL2O3/S LZP-950CBX-Phenol PLOT GDX-102农残C农残A农残B CB-PLOT QLZP-920LZP-930LZP-940CB-Metal APLOT GDX-202PLOT GDX-501CB-PLOT U MXT?-500 Sim Dist VF-35ms Rtx?-VMS Rtx?-2887Rtx?-20Rtx?-VGC CB-PLOT Silica FAMEWAX CB-202PLOT GDX-502CBX PLOT-5A MXT?-BAC1CB-AL2O3/MRt-βDEXsa Rtx?-502.2PLOT TDX-01B PLOT TDX-03 PLOT GDX-403PLOT GDX-401MXT?-BAC2HP-PLOT QCB-204Rt-βDEXsp PLOT GDX-203CBX-Dexsil 300 HP-PLOT 氧化铝/S Rtx?-VRX PLOT GDX-103Rt-SPLOTPLOT GDX-201C-2000MXT?-2887PLOT TDX-02B PONA MXT?-502.2PLOT GDX-105苯甲酚专用柱CB-PLOT 5A Rtx?-CLPesticides2Rtx?-440PLOT GDX-303苯系物专用柱DB-608Rtx?-CLPesticides CB-Dexsil 300Rt-βDEXcst Rtx?-PCB MXT?-65TG Rt-βDEXseCB-201Rtx?-XLB Rt-βDEXsm Rt-QPLOTPLOT GDX-104CB-BasicWax PLOT GDX-101CB-PLOT SPLOT GDX-301VF-200ms。

下面分别是USPL1～L60的对映。

L1—Octadecyl silane chemically bonded to porous silica or ceramic micro-particles,3to 10µm in diameter.L2—Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core,30to 50µm in diameter.L3—Porous silica particles,5to 10µm in diameter.L4—Silica gel of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter.L5—Alumina of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter.L6—Strong cation-exchange packing–sulfonated fluorocarbon polymer coated on a solid spherical core,30to 50µm in diameter.L7—Octylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter.L8—An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support,10µm in diameter.L9—10-µm irregular or spherical,totally porous silica gel having a chemically bonded,strongly acidic cation-exchange coating.L10—Nitrile groups chemically bonded to porous silica particles,3to 10µm in diameter.L11—Phenyl groups chemically bonded to porous silica particles,5to 10µm in diameter.L12—Astrong anion-exchange packing made by chemically bonding a quaternary amine to a solid silica spherical core,30to 50µm in diameter.L13—Trimethylsilane chemically bonded to porous silica particles,3to 10µm in diameter.L14—Silica gel 10µm in diameter having a chemically bonded,strongly basic quaternary ammonium anion-exchange coating.L15—Hexylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter.L16—Dimethylsilane chemically bonded to porous silica particles,5to 10µm in diameter.L17—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen form,7to 11µm in diameter.L18—Amino and cyano groups chemically bonded to porous silica particles,3to 10µm in diameter.L19—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form,about 9µm in diameter.L20—Dihydroxypropane groups chemically bonded to porous silica particles,5to 10µm in diameter.L21—Arigid,spherical styrene-divinylbenzene copolymer,5to 10µm in diameter.L22—Acation-exchange resin made of porous polystyrene gel with sulfonic acid groups,about 10µm in size.L23—An anion-exchange resin made of porous polymethacrylate or polyacrylate gel with quaternary ammonium groups,about 10µm in size.L24—Asemi-rigid hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrix surface,32to 63µm in diameter.5L25—Packing having the capacity to separate compounds with a molecular weight range from 100–5000(as determined by polyethylene oxide),applied to neutral,anionic,and cationic water-soluble polymers.Apolymethacrylate resin base,cross-linked with polyhydroxylated ether (surface contained some residual carboxyl functional groups)was found suitable.L26—Butyl silane chemically bonded to totally porous silica particles,5to 10µm in diameter.L27—Porous silica particles,30to 50µm in diameter.L28—Amultifunctional support,which consists of a high purity,100Å,spherical silica substrate that has been bonded with anionic exchanger,amine functionality in addition to a conventional reversed phase C8functionality.L29—Gamma alumina,reverse-phase,low carbon percentage by weight,alumina-based polybutadiene spherical particles,5µm in diameter with a pore volume of 80Å.L30—Ethyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter.L31—Astrong anion-exchange resin-quaternary amine bonded on latex particles attached toa core of 8.5-µm macroporous particles having a pore size of 2000Åand consisting of ethylvinylbenzene cross-linked with 55%divinylbenzene.L32—Achiral ligand-exchange packing–L-proline copper complex covalently bonded to irregularly shaped silica particles,5to 10µm in diameter.L33—Packing having the capacity to separate dextrans by molecular size over a range of 4,000to 500,000Da.It is spherical,silica-based,and processed to provide pHstability.6L34—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form,about 9µm in diameter.L35—Azirconium-stabilized spherical silica packing with a hydrophilic (diol-type)molecular monolayer bonded phase having a pore size of 150Å.L36—A3,5-dinitrobenzoyl derivative of L-phenylglycine covalently bonded to 5-µm aminopropyl silica.L37—Packing having the capacity to separate proteins by molecular size over a range of 2,000to 40,000Da.It is a polymethacrylate gel.L38—Amethacrylate-based size-exclusion packing for water-soluble samples.L39—Ahydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.L40—Cellulose tris-3,5-dimethylphenylcarbamate coated porous silica particles,5to 20µm in diameter.L41—Immobilized a1-acid glycoprotein on spherical silica particles,5µm in diameter.L42—Octylsilane and octadecylsilane groups chemically bonded to porous silica particles,5µm in diameter.L43—Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer,5to 10µm in diameter.L44—Amultifunctional support,which consists of a high purity,60Å,spherical silica substrate that has been bonded with a cationic exchanger,sulfonic acid functionality in addition to a conventional reversed phase C8functionality.L45—Beta cyclodextrin bonded to porous silica particles,5to 10µm in diameter.L46—Polystyrene/divinylbenzene substrate agglomerated with quaternary amine functionalized latex beads,10µm in diameter.L47—High-capacity anion-exchange microporous substrate,fully functionalized with trimethlyamine groups,8µm in diameter.7L48—Sulfonated,cross-linked polystyrene with an outer layer of submicron,porous,anion-exchange microbeads,15µm in diameter.L49—Areversed-phase packing made by coating a thin layer of polybutadiene onto spherical porous zirconia particles,3to 10µm in diameter.8L50—Multifunction resin with reversed-phase retention and strong anion-exchange functionalities.The resin consists of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm in diameter,and a surface area not less than 350m2per g.Substrate is coated with quaternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene.9L51—Amylose tris-3,5-dimethylphenylcarbamate-coated,porous,spherical,silica particles,5to 10µm in diameter.10L52—Astrong cation exchange resin made of porous silica with sulfopropyl groups,5to 10µm in diameter.11L53—Weak cation-exchange resin consisting of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm diameter.Substrate is surface grafted with carboxylic acid and/or phosphoric acid functionalized monomers.Capacity not less than 500µEq/column.12L54—Asize exclusion medium made of covalent bonding of dextran to highly cross-linked porous agarose beads,about 13µm in diameter.13L55—Astrong cation-exchange resin made of porous silica coated with polybutadiene–maleic acid copolymer,about 5µm in diameter.14L56—Isopropyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter.15L57—Achiral-recognition protein,ovomucoid,chemically bonded to silica particles,about 5µm in diameter,with a pore size of 120Å.L58—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form,about 7to 11µm in diameter.16L59—Packing having the capacity to separate proteins by molecular weight over the range of 10to 500kDa.It is spherical (10µm),silica-based,and processed to provide hydrophilic characteristics and pHstability.17USP28L60—Spherical,porous silica gel,3or 5µm in diameter,the surface of which has been covalently modified with palmitamidopropyl groups and endcapped with acetamidopropyl groups to a ligand density of about 6µmoles per m2.18USP28。

下面分别是USPL1～L60的对映。

L1—Octadecyl silane chemically bonded to porous silica or ceramic micro-particles,3to 10µm in diameter.L2—Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core,30to 50µm in diameter.L3—Porous silica particles,5to 10µm in diameter.L4—Silica gel of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter.L5—Alumina of controlled surface porosity bonded to a solid spherical core,30to 50µm in diameter.L6—Strong cation-exchange packing–sulfonated fluorocarbon polymer coated on a solid spherical core,30to 50µm in diameter.L7—Octylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter.L8—An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support,10µm in diameter.L9—10-µm irregular or spherical,totally porous silica gel having a chemically bonded,strongly acidic cation-exchange coating.L10—Nitrile groups chemically bonded to porous silica particles,3to 10µm in diameter.L11—Phenyl groups chemically bonded to porous silica particles,5to 10µm in diameter.L12—Astrong anion-exchange packing made by chemically bonding a quaternary amine to a solid silica spherical core,30to 50µm in diameter.L13—Trimethylsilane chemically bonded to porous silica particles,3to 10µm in diameter.L14—Silica gel 10µm in diameter having a chemically bonded,strongly basic quaternary ammonium anion-exchange coating.L15—Hexylsilane chemically bonded to totally porous silica particles,3to 10µm in diameter.L16—Dimethylsilane chemically bonded to porous silica particles,5to 10µm in diameter.L17—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen form,7to 11µm in diameter.L18—Amino and cyano groups chemically bonded to porous silica particles,3to 10µm in diameter.L19—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form,about 9µm in diameter.L20—Dihydroxypropane groups chemically bonded to porous silica particles,5to 10µm in diameter.L21—Arigid,spherical styrene-divinylbenzene copolymer,5to 10µm in diameter.L22—Acation-exchange resin made of porous polystyrene gel with sulfonic acid groups,about 10µm in size.L23—An anion-exchange resin made of porous polymethacrylate or polyacrylate gel with quaternary ammonium groups,about 10µm in size.L24—Asemi-rigid hydrophilic gel consisting of vinyl polymers with numerous hydroxyl groups on the matrix surface,32to 63µm in diameter.5L25—Packing having the capacity to separate compounds with a molecular weight range from 100–5000(as determined by polyethylene oxide),applied to neutral,anionic,and cationic water-soluble polymers.Apolymethacrylate resin base,cross-linked with polyhydroxylated ether (surface contained some residual carboxyl functional groups)was found suitable.L26—Butyl silane chemically bonded to totally porous silica particles,5to 10µm in diameter.L27—Porous silica particles,30to 50µm in diameter.L28—Amultifunctional support,which consists of a high purity,100Å,spherical silica substrate that has been bonded with anionic exchanger,amine functionality in addition to a conventional reversed phase C8functionality.L29—Gamma alumina,reverse-phase,low carbon percentage by weight,alumina-based polybutadiene spherical particles,5µm in diameter with a pore volume of 80Å.L30—Ethyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter.L31—Astrong anion-exchange resin-quaternary amine bonded on latex particles attached toa core of 8.5-µm macroporous particles having a pore size of 2000Åand consisting of ethylvinylbenzene cross-linked with 55%divinylbenzene.L32—Achiral ligand-exchange packing–L-proline copper complex covalently bonded to irregularly shaped silica particles,5to 10µm in diameter.L33—Packing having the capacity to separate dextrans by molecular size over a range of 4,000to 500,000Da.It is spherical,silica-based,and processed to provide pHstability.6L34—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form,about 9µm in diameter.L35—Azirconium-stabilized spherical silica packing with a hydrophilic (diol-type)molecular monolayer bonded phase having a pore size of 150Å.L36—A3,5-dinitrobenzoyl derivative of L-phenylglycine covalently bonded to 5-µm aminopropyl silica.L37—Packing having the capacity to separate proteins by molecular size over a range of 2,000to 40,000Da.It is a polymethacrylate gel.L38—Amethacrylate-based size-exclusion packing for water-soluble samples.L39—Ahydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.L40—Cellulose tris-3,5-dimethylphenylcarbamate coated porous silica particles,5to 20µm in diameter.L41—Immobilized a1-acid glycoprotein on spherical silica particles,5µm in diameter.L42—Octylsilane and octadecylsilane groups chemically bonded to porous silica particles,5µm in diameter.L43—Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer,5to 10µm in diameter.L44—Amultifunctional support,which consists of a high purity,60Å,spherical silica substrate that has been bonded with a cationic exchanger,sulfonic acid functionality in addition to a conventional reversed phase C8functionality.L45—Beta cyclodextrin bonded to porous silica particles,5to 10µm in diameter.L46—Polystyrene/divinylbenzene substrate agglomerated with quaternary amine functionalized latex beads,10µm in diameter.L47—High-capacity anion-exchange microporous substrate,fully functionalized with trimethlyamine groups,8µm in diameter.7L48—Sulfonated,cross-linked polystyrene with an outer layer of submicron,porous,anion-exchange microbeads,15µm in diameter.L49—Areversed-phase packing made by coating a thin layer of polybutadiene onto spherical porous zirconia particles,3to 10µm in diameter.8L50—Multifunction resin with reversed-phase retention and strong anion-exchange functionalities.The resin consists of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm in diameter,and a surface area not less than 350m2per g.Substrate is coated with quaternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene.9L51—Amylose tris-3,5-dimethylphenylcarbamate-coated,porous,spherical,silica particles,5to 10µm in diameter.10L52—Astrong cation exchange resin made of porous silica with sulfopropyl groups,5to 10µm in diameter.11L53—Weak cation-exchange resin consisting of ethylvinylbenzene,55%cross-linked with divinylbenzene copolymer,3to 15µm diameter.Substrate is surface grafted with carboxylic acid and/or phosphoric acid functionalized monomers.Capacity not less than 500µEq/column.12L54—Asize exclusion medium made of covalent bonding of dextran to highly cross-linked porous agarose beads,about 13µm in diameter.13L55—Astrong cation-exchange resin made of porous silica coated with polybutadiene–maleic acid copolymer,about 5µm in diameter.14L56—Isopropyl silane chemically bonded to totally porous silica particles,3to 10µm in diameter.15L57—Achiral-recognition protein,ovomucoid,chemically bonded to silica particles,about 5µm in diameter,with a pore size of 120Å.L58—Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form,about 7to 11µm in diameter.16L59—Packing having the capacity to separate proteins by molecular weight over the range of 10to 500kDa.It is spherical (10µm),silica-based,and processed to provide hydrophilic characteristics and pHstability.17USP28L60—Spherical,porous silica gel,3or 5µm in diameter,the surface of which has been covalently modified with palmitamidopropyl groups and endcapped with acetamidopropyl groups to a ligand density of about 6µmoles per m2.18USP28。

L1 Octadecyl silane chemically bonded to porous silica or ceramic.L1 十八烷基键合硅烷化学键合于多孔硅胶或陶瓷微粒，3-10u。

L2 Octadecyl silane chemically bonded to silica gel of a controlled surface porosity that has been bonded to a solid spherical core, 30 to 50 μm in diameter.L2 十八烷基键合硅烷化学键合于表面空隙率一定的键合在紧密球核上的硅胶，粒径30-50u。

L3 Porous silica particles, 5 to 10 μm in diameter.L3 多孔硅胶颗粒，粒径5-10u。

L4 Silica gel of controlled surface porosity bonded to a solid spherical core,30 to 50 μm in diameter.L4 表面空隙率一定的硅胶键合于紧密球核上，粒径30-50u。

L5 Alumina of controlled surface porosity bonded to a solid spherical core,30 to 50 μm in diameter.L5 表面空隙率一定的氧化铝键合于紧密球核上，粒径30-50u。

L6 Strong cation-exchange packing: sulfonated fluorocarbon polymer coated on a solid spherical core, 30 to 50 μm in diameter.L6 强阳离子交换填料：磺化氟代烃聚合物涂渍于紧密球核上，粒径30-50u。

L7 Octyl silane chemically bonded to totally porous silica particles, 1.5 to 10 μm in diameter.L7 辛基硅烷化学键合于完全多孔硅胶担体，粒径10u。