Parker快换接头样本

Catalog HY15-3502/USFlow Control Valves ContentsParker Hannifin CorporationFC1Flow Control ValvesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationINTRODUCTIONThis technical tips section is designed to help familiarize you with the Parker line of Flow Control Valves. In this section we present common options available as well as a brief synopsis of the operation and applications of the various product offered in this section. The intent of this section is to help you in selecting the best products for your application.Adjustment Types: Parker offers four primary types of adjustments for most of the flow control products.Samples of these types are shown below. Please note all options may not be available for all valves. Consult the individual catalog pages for more details.Screw Adjustment - Valve can be adjusted with an allen wrench. Lock nut included to maintain desired setting after adjustment. This is the most common adjustment option available on most Parker products.Knob Adjustment - An aluminum knob is added to the standard screw adjustment. A lock knob is provided to help maintain the desired setting after adjustment. Parker offers knob conversion kits for most flow control valves. For kit numbers consult the individual valve pages.Fixed Style - In most cases, the Fixed Style product is a screwadjustable product with a steel collet threaded over the adjustment.These valves are preset at the factory. Should the valve need to adjusted, the star washer andaluminum plate can be removed from the top of the assembly exposing the adjustment.Tamper Resistant - The tamper resistant option is a screw adjustable valve with a steel cap installed to con-ceal the adjustment. The cap is designed so the internal edges clamp into the groove of the valve adapter. Once the cap is installed, it cannot be removed without damaging the cap and the valve.When a valve is ordered with the tamper resistant option, it will be preset at the factory, and the cap will be included in a separate plastic bag to allow for fine tuning at the customer site. Parker offers tamper re-sistant cap conversion kits for most flow control valves.For kit numbers consult the individual valve pages.Seals: The Winner’s Circle products feature astandard 4301 Polyurethane “D”-Ring. The “D”-Ring eliminates the need for backup rings.The majority of the products are available in Nitrile or Fluorocarbon Seals. You should match the seal compatibility to the temperature and fluid being used in your application.Fine Meter Options: Fine meter needles are offered on some needle valve series. When this option isspecified, the standard needle is replaced by a slotted needle. The slotted needle restricts substantially more flow giving you finer control in the small flow ranges.Obviously, the maximum flow capacity of the needle valve is decreased with the fine meter option.Coarse NeedleFine NeedleCOMMON OPTIONSAs you will see, Parker offers a variety of Flow Control products. As such, some of the options mentioned below may not be available on all valve models. Consult the model coding and dimensions of each valve for specifics.Here are some of the common options available.Catalog HY15-3502/USFlow Control Valves Technical TipsParker Hannifin CorporationFC2FC3Flow Control ValvesCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USFlow Control Valves Technical TipsParker Hannifin CorporationFC4Needle Valve Series J02A2Catalog HY15-3502/USFC5Parker Hannifin Corporation Technical InformationCatalog HY15-3502/USNeedle Valve Series J02A2FC6Parker Hannifin Corporation Technical InformationNeedle Valve Series NVH081Catalog HY15-3502/USFC7Parker Hannifin Corporation Technical InformationHardened, precision ground parts for durability Compact size for reduced space requirements Fine adjustment needle option available for precise Polyurethane “D”-Ring eliminates backup rings and Valve meters flow in either direction, but (2 to 1) is the preferred direction for lowest leakage at shut offCatalog HY15-3502/USNeedle Valve Series NVH081FC8Parker Hannifin Corporation Technical InformationNeedle Valve Series NVH101Catalog HY15-3502/USFC9Parker Hannifin Corporation Technical InformationPerformance CurvesFlow vs. Inlet Pressure Hardened, precision ground parts for durability Compact size for reduced space requirements Fine adjustment needle option available for precise Polyurethane “D”-Ring eliminates backup rings and Valve meters flow in either direction, but (2 to 1) is the preferred direction for lowest leakage at shut offCatalog HY15-3502/USNeedle Valve Series NVH101FC10Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle Valve Series J06A2Catalog HY15-3502/USFC11Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USNeedle Valve Series J06A2FC12Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle Valve Series J02B2Catalog HY15-3502/USFC13Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USNeedle Valve Series J02B2FC14Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationNeedle ValveSeries FV101 and FV102Catalog HY15-3502/USFC15Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationFree FlowMetered FlowCatalog HY15-3502/USNeedle ValveSeries FV101 and FV102FC16Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationP.C. Flow Control Valve Series J02E2Catalog HY15-3502/USFC17Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationCatalog HY15-3502/USP.C. Flow Control Valve Series J02E2FC18Parker Hannifin Corporation Hydraulic Cartridge SystemsTechnical InformationFC19P.C. Flow Regulator Valve Series FR101Catalog HY15-3502/USParker Hannifin CorporationHydraulic Cartridge SystemsTechnical InformationAdjustable StyleSeries FR101Technical InformationAdjustable StyleSeries J04E2Technical InformationAdjustable StyleSeries J04C2Technical InformationSeries FA101Technical InformationSeries FC101Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J02D3FC30Parker Hannifin Corporation Technical InformationFC31P.C. Priority Flow Regulator Valve Series FP101Catalog HY15-3502/USParker Hannifin Corporation Technical InformationFeaturesHardened, precision ground parts for durability Cartridge design(2)FC32Catalog HY15-3502/USP.C. Priority Flow Regulator ValveSeries FP101Parker Hannifin Corporation Technical InformationP.C. Priority Flow Control Valve Series J04D3Catalog HY15-3502/USFC33Parker Hannifin Corporation Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J04D3FC34Parker Hannifin Corporation Technical InformationP.C. Priority Flow Control Valve Series J1A125Catalog HY15-3502/USFC35Parker Hannifin Corporation Technical Information(2)Catalog HY15-3502/USP.C. Priority Flow Control Valve Series J1A125FC36Parker Hannifin Corporation Technical InformationFC37Catalog HY15-3502/USParker Hannifin Corporation Restrictive Type Pressure Compensator Valve Series FCR101Technical Information(1)(3)FC38Catalog HY15-3502/USRestrictive Type Pressure Compensator ValveSeries FCR161Parker Hannifin Corporation Technical Information (3)FC39Catalog HY15-3502/USParker Hannifin Corporation Priority Type Pressure Compensator Valve Series FCP101Technical InformationFC40Parker Hannifin CorporationPriority Type Pressure Compensator Valve Series FCPH121Catalog HY15-3502/USFC41Parker Hannifin Corporation Technical InformationCatalog HY15-3502/USPriority Type Pressure Compensator Valve Series FCPH121FC42Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series FDC101Catalog HY15-3502/USFC43Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets(3)Divider Inlet Combiner OutletCatalog HY15-3502/USFlow Divider/Combiner Valve Series FDC101FC44Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L04A3Catalog HY15-3502/USFC45Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets (3)Divider InletCatalog HY15-3502/USFlow Divider/Combiner Valve Series L04A3FC46Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L06A3Catalog HY15-3502/USFC47Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets (3)Divider InletCatalog HY15-3502/USFlow Divider/Combiner Valve Series L06A3FC48Parker Hannifin Corporation Technical InformationFlow Divider/Combiner Valve Series L1A300Catalog HY15-3502/USFC49Parker Hannifin Corporation Technical InformationDivider Outlets Combiner Inlets。

Parker流体连接件Parker流体连接件Parker Fluid connectors productParker流体连接件 :包括 EO，EO2液压卡套接头，DIN⽆缝钢管，PARKER软管,PARKER软管接头，PARKER免剥胶软管，PARKER液压软管，软管接头及各类软管总成，测压管总成， PARKER软管接头外连接形式DKO 24°锥，NPT美制锥螺纹，JIC37°扩⼝，ORFS美制平⾯密封，JIS60°锥，JIS30°扩⼝，SAE法兰等。

快速接头，单向阀，球阀，管夹等各类液压连接件及卡套预装机，软管扣压机，⼿动弯管器，液压测试仪等。

Parker 快速接头Parker CPI&A-LOK卡套接头Parker MPI卡套接头Parker PHASTITE接头Parker EO2不锈钢接头Parker EO黄铜接头Parker EO渐进式卡套接头Parker EO-DUR不锈钢接头Parker EO焊接接头Parker O-LOK Plus断⾯密封接头Parker 硬管接头Parker 黄铜过渡接头Parker ⽓动接头Parker EO单向阀Parker EO截⽌阀及⼆通球阀Parker Prestomatic 2⽓制动接头Parker EO钢管Parker EO管夹Parker Triple-Lok 37° 扩⼝式接头Parker 仪表PIPE接头和ISO转换接头Parker PIPE活接头Parker 液压法兰及组件Parker 快速接头及诊断设备Parker Parflange F37⾼压⼤尺⼨液压管接头Parker O-LOK接头Parker Ermeto接头Parker橡胶液压软管Parker Parflex热塑软管Parker矿⼭机械⽤胶管,SteckO胶管接头和过渡接头Parker碳钢、不锈钢过渡接头Parker fittingsParker Quick Couplings and AccessoriesParker流体连接件PDF资料下载⽂件名称美国Parker流体连接件中国区产品⼿册 3400-CNParker软管，接头及设备Parker硬管接头及设备Parker快速接头Parker诊断设备 , Parker诊断，测试设备Parker技术⼿册Parker过程控制⾏业产品选型指南 Catalog 4204-ProcessParker Parkrimp 扣压系列 Push-Lok 可拆式 26系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 43系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 70系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 73系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 77系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 78系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 79系列软管接头Parker Parkrimp 扣压系列 Push-Lok 可拆式 82系列软管接头Parker 软管 201和206系列交通⾏业软管Parker 软管制冷⾏业软管 285,244系列Parker 软管交通⾏业软管 293,213系列Parker 软管液压软管 302,436系列Parker 软管磷酸酯软管低温软管 304,472LT系列Parker 软管恒压软管 351TC,351ST系列Parker 软管液压软管 372,701系列Parker 软管铁路⾏业软管 441RH,372RH系列Parker 软管恒压软管 451TC, 451ST, 451TC Twin系列Parker 软管液压软管 471TC, 471ST, 471TC Twin系列Parker 软管液压软管 482TC, 482ST, 426系列Parker 软管液压软管 611, 601系列Parker 软管交通⾏业软管, 新能源/船舶⾏业软管 611HT, SS23CG系列Parker 软管铁路⾏业软管, 681DB, 421RH 系列Parker 软管低温软管, 722LT, 792LT 系列Parker 软管恒压软管, 722TC 系列Parker 软管液压软管 731, JK 系列Parker 软管恒压软管, 781, P35 系列Parker 软管恒压软管, 787TC 系列Parker 软管恒压软管, 791TC, 792ST 系列Parker 软管恒压软管, 797TC 系列Parker 软管吸油/回油软管, 811, 811HT 系列Parker 软管 Push-Lok 软管, 821, 821FR 系列Parker 软管 Push-Lok 软管, 836, 804 系列Parker 软管吸油/回油软管, Push-Lok 软管, 881, 801 系列Parker 软管设备及附件台式切割机台式软管切割机 CTH-1Parker 软管液压软管 H561, 422 系列Parker 软管技术信息如何订购软管，接头与设备Parker 软管技术信息 Media 介质Parker 软管接头及设备 PARKER_HOSE_OVERVIEW_CNParker 软管技术信息如何订购软管，接头与设备软管总成⽣产步骤Parker 派克软管、硬管、接头、连接器、阀及相关附件的选型使⽤安全指南Parker 软管设备及附件 KK2扣压机操作指南Parker 软管设备及附件 KK2便携式扣压机Parker 软管技术信息 Parkrimp No-Skive软管总成⽣产步骤Parker 软管设备及附件 PK2扣压机操作指南Parker 软管设备及附件 PK2扣压机Parker 快换接头通⽤型60 系列快换接头Parker 快换接头螺纹连接型6100 系列快换接头Parker 快换接头通⽤型6600 系列快换接头Parker 快换接头技术信息Parker 快换接头⽆溢流型FEM / IF 系列快换接头Parker 快换接头⽆溢流型FF系列快换接头Parker 快换接头技术信息流体兼容性表Parker 快换接头技术信息概览Parker 快换接头螺纹连接型QHPA 系列快换接头Parker 快换接头技术信息针对派克快换接头及相关附件选型及使⽤的安全指南Parker Parkrimp 扣压系列 Push-Lok 可拆式 S6系列软管接头Parker 软管新能源/船舶⾏业软管, SS25UL, 221FR 系列Parker软管设备及附件软管总成测试台TH 5-3Parker软管设备及附件清洗设备 TH 6-6Parker软管设备及附件清洗设备 TH 6-7Parker软管设备及附件软管清洁包 TH6-10-HL-9-2Parker软管设备及附件重载卧式扣压机 TH8E-380-BMParker软管设备及附件卧式扣压机 TH8E-530, TH 8E-535-BM Parker 快换接头⽆溢流型71 系列快换接头Parker 快换接头通⽤型H 系列快换接头Parker 快换接头螺纹连接型75 系快换接头Parker 快换接头⽆溢流型 FF系列系列快换接头Parker 快换接头⾼压型HP 系列快换接头Parker 快换接头通⽤型 TEMA T系列快换接头Parker Industrial Tube FittingsParker 软管接头及设备技术⼿册化学兼容性表Parker Hose Fittings and EquipmentParker 387 HoseParker 487 HoseParker 722 HoseParker 787 HoseParker 797 HoseParker Five Hoses Two Fittings One SolutionParker Transportation Hose 226 运输软管226系列软管Parker Hydraulic Hose 351TC 351STParker 451TC and 451ST Constant Working Pressure Hoses Parker Hydraulic Hose 711Parker Hydraulic Hose 721 721TCParker Hydraulic Hose 772TC 772STParker Hydraulic Hose 781 P35Parker Hydraulic Hose 782TC 782STParker Hydraulic Hose 791TC 792TC 792ST Parker 低压软管软管接头 PUSH-LOK 系列软管Parker 低压软管软管接头 838M – Push-Lok 软管。

PF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products for Bulk Chemical and Fluid TransferBulletin 3800-PFAugust,2004PF Series Non-Spill Quick CouplingsTypical ApplicationsQuick Coupling Features, Advantages and Benefits•Parker Quick Couplings automatically shut off on disconnection to reduce or eliminate spills and leaks •Flush face design exhibits minimal spillage and air inclusion upon connection or disconnection reducing system contamination •Available in sizes 1⁄2”, 1”, and 2”providing quality couplers for most applications •Lightweight and reliable push-to-connect operation reduces worker fatigue and increases productivity •Plastic composite will not scratch painted or finished surfaces reducing costly rework•Parker Quick Couplings offer flexibility and save time when frequent connection and disconnection is required•1⁄2” PF Couplers and nipples interchange with the Parker 1⁄2” FS Series stainless steel non-spill couplers and nipples.The FS Coupler provides durability for the end of transfer hoses while the PF offers all the advantages of a plastic coupler on the tank•1” coupler has non-wetted springs reducing system contamination and improving flow•Chemical Manufacturing and Distribution •Replacement for Camlok Style Fittings and Ball Valves•Herbicide, Insecticide and Pesticide Processing •Spray Application Equipment •Bulk Transfer Barrels •Mini Bulk Tanks•Chemical Transport and Handling •Pharmaceutical ManufacturingParker PF Series non-spill couplings virtually eliminate the possibility of accidental chemical leaks or spills when lines are connected or disconnected.This makes them the ideal choice whenever a closed system fluid transfer or dispensing process is desired.Constructed from glass filled polypropylene with PTFE coated fluorocarbon tank gaskets,they are inert to most chemicals.This means they provide excellent performance whenused on applicators,returnable containers or bulk storage tanks.T a n k M o u n t :C o u p l e r s :B o d y S i z e 1 i n c h P B o d y S i z e 1/2 i n c h1 i n c h2 i n c h B o d y S i z e 1/2 i n c h 1 i n c h S p e c i f i c a t i o n s :R a t e d P r e s s u r e P r e s s u r e D r o p F o r c e t o F o r c e t o O p e r a t i n g S t o r a g e M a x i m u m S p i l l a g e B o d y S i z eM a t e r i a l S p r i n g s S e a l s @ 68°F R a t e d F l o w a t R a t e d F l o w C o n n e c t D i s c o n n e c t T e m p e r a t u r e T e m p e r a t u r e p e r D i s c o n n e c t V a c u u m R a t i n g 1/2 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n 100 P S I 12 G P M 11.3 P S I 32 l b s 12 l b s +40°F t o +140°F -20°F t o +140°F 0.01 c u i n (0.14 m l )27.4 H g 1 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n 60 P S I 20 G P M 3.4 P S I 54 l b s 17 l b s +40°F t o +140°F -20°F t o +140°F 0.06 c u i n (1.0 m l )C o n s u l t F a c t o r y 2 i n c hP o l y p r o p y l e n e 316 S t a i n l e s s S t e e l F l u o r o c a r b o n100 P S I50 G P M4.0 P S I 41 l b s 17 l b s +40°F t o +140°F -20°F t o +140°F 0.18 c u i n (3.0 m l )C o n s u l t F a c t o r yParker Industrial Hose ProductsDynaFlex®PVC Standard Duty Suction HoseSeries 7560 is a versatile hose for agriculture, mining, construction, and industry.Warning: Elevated temperatures can change chemical resistance ratings. Check chemical concentration and compatibility.Other Quick Coupling ProductsHydraulic Quick Couplings • Various Configurations • Double Shut-Off • Single Shut-Off • Straight ThroughSwivels• Various End Configurations • In-Line Styles • 90°StylesCheck Valves • In-line Styles • Cartridge Styles • Split-flange Styles • 5,000 Configurations Bulletin 3800-PFQuick Couplings Parker Hannifin Corporation Quick Coupling Division 8145 Lewis Road Minneapolis,MN 55427Phone:763-525-4240Fax:763-544-3418Industrial Hose ProductsParker Hannifin Corporation Industrial Hose Products 17295 Foltz Industrial Parkway Cleveland,OH 44149Phone:440-286-2120Fax:440-286-2230/quickcouplingsPRINTED IN U.S.A. GR, MP 5M 08/04For additional information:Innovative Solutions with Unique Advantages:Pneumatic Quick Couplings • Industry Interchanges • Manual Connect • Push-to-Connect • Exhaust StylesThermoplastic Couplings • Various Sizes• Chemical Compatibility • Push-to-Connect • Non-Spill StylesDiagnostic Equipment • Digital Recording Meters • Digital Gauges• Diagnostic Quick Couplings • Sensors and Accessories。

液压注意 – 用户方责任 错误或不当地选择或使用本样本或有关资料阐述的产品，可能会导致人生伤亡及财产损失！ 本样本以及其它由派克汉尼汾公司及其子公司、销售公司与授权分销商所提供的资料，仅供用户专业技术人员在对产品和系统的选型进行深入调查考证时参考。

用户应全面分析自身设备的运行工况、适用的工业标准，并仔细查阅现行的样本，以详细地了解产品及系统的相关信息，通过自己的分析和试验，对产品及系统的独立的最终选择负责，确保能满足自身设备的所有性能、耐用性、维修型、安全性以及预警功能等要求。

对于派克或其子公司或授权分销商而言，应负责按用户提供的技术资料和规范，选择和提供适当的元件或系统，而用户则应负责确定这些技术资料和规范对其设备的所有运行工况和能合理预见的使用工况是否充分和准确。

目录目录页次概述 1 订货代号 2 技术参数 4 变量控制器 5 控制选项 “C”, 压力限定(恒压)变量控制器 5 控制选项 “L”, 负载传感及压力限定变量控制器 6 控制选项 “AM”, 带遥控口的标准型先导式压力限定变量控制器 7 控制选项 “AN”, 带ISO 4401 NG06先导阀安装界面的先导式压力限定变量控制器 8 控制选项 “AE”及“AF”, 带电磁比例调节的先导式压力限定变量控制器 9 控制选项 “AMT”, “ALT”及“LOT”, 带最高压力限定的扭矩限定(恒功率)变量控制器 10 P1性能特性 11典型流量特性 11 典型总效率特性 13 典型轴输入功率特性 15 典型噪声特性 18 典型轴承寿命 20 PD性能特性 22典型流量特性 22 典型总效率特性 24 典型轴输入功率特性 26 典型噪声特性 29 典型轴承寿命 31 安装尺寸 33 P1/PD 018 33 P1/PD 028 36 P1/PD 045 40 P1/PD 060 44 P1/PD 075 49 P1/PD 100 54 P1/PD 140 59 变量控制器安装尺寸 65 可提供的扩展的液压产品 75派克汉尼汾备记派克汉尼汾概述简介, 优点派克汉尼汾简介 • 开式回路用轴向柱塞式变量液压泵 • 中压，连续工作压力280 bar • 高驱动转速型，适用于行走机械； 低噪声型，适用于工业应用 • 静音及高效的控制效能 优点 • 总结构尺寸紧凑 • 低噪声• 流量脉动小，进一步降低噪声• 采用弹性密封，不使用密封垫，从而避免外泄漏的产生• 总效率高，功耗小，减小发热• 采用带无泄漏调节装的简单变量控制器 • 符合SAE 及ISO 标准的安装法兰及油口 • 采用圆锥滚柱轴承，使用寿命长 • 全功率后驱动能力• 后部或侧面油口配置可选• 泄油口的配置对水平安装及驱动轴向上垂直安装均适用• 带有最大及最小排量调节选项 • 具有壳体至吸口单向阀选项，可延长轴封寿命 • 使用、维修方便 脉动容腔技术下列图表所示为侧向油口配置P1/PD 18, 28及45泵采用 “脉动容腔” 技术的效果，脉动容腔可降低泵出口处的压力脉动幅值40-60%，这样，无需增加成本来加装噪声缓冲元件，便可大大降低液压系统的整体噪声，P1系列 PD 系列出口压力p / bar平均压力脉动 / b a rP1 045出口压力脉动2600 rpm 无脉动容腔2600 rpm 带脉动容腔订货代号18 ml, 28 ml, 45ml派克汉尼汾P 类型 01 驱动轴 转向R 5密封材料E 油口配置0 壳体-吸口 单向阀 0 排量调节 018 排量 S 安装法兰 及油口 S 轴封 M 应用范围A 设计系列0 通轴驱动选项 C0控制选项0附加控制选项 00油漆 00修改代号系列 P D * 仅适用于045排量, “S”型安装法兰及油口00 标准型, 无修改M2 按要求修改 代号修改代号 * 适用于028及045排量 ** 仅适用于045排量 代号设计系列 A 现行设计系列5 氟碳橡胶 (FPM) 代号密封材料 A 82-2 SAE A M33x2 M27x2 BSPP 1/4”, 3/8” 101-2 SAE B M42x2 M27x2 BSPP 1/4”, 1/2” 101-2SAE B M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”B ISO M33x2 M27x2 BSPP 1/4”,3/8”ISO M42x2 M27x2 BSPP 1/4”, 1/2” ISO M48x2M33x2Ø38/25DN51/25BSPP 1/4”, 1/2”代号 018排量 028排量 045排量 安装法兰及油口 安装 法兰 螺纹 油口 辅助 油口 安装 法兰 螺纹 油口 辅助 油口 安装法兰螺纹油口法兰 油口辅助 油口 S 82-2 SAE A SAE 16/12 SAE 4/6 101-2 SAE B SAE 20/12 SAE 4/8 101-2SAE B SAE 24/16Ø38/2561系列SAE 4/10M ISO M33x2 M27x2 M12x1.5 M16x1.5 ISO M42x2 M27x2 M12x1.5 M22x1.5 ISO M48x2M33x2Ø38/25DN51/25M12x1.5M22x1.5代号 018驱动轴 028驱动轴 045驱动轴 01 SAE A 11T 花键SAE B-B 15T 花键 SAE B-B 15T 花键02 SAE 19-1平键Ø0.75” SAE B-B 平键Ø1” SAE B-B 平键Ø1” 08— SAE B 13T 花键 SAE B 13T 花键 04 ISO/DIN 平键, Ø20ISO/DIN 平键, Ø25ISO/DIN 平键, Ø25 06 SAE A 9T 花键— — PD 工业液压用 代号 系列P1 行走机械用 代号 排量 018 18 ml/rev (1.10 in 3/rev) 028 28 ml/rev (1.71 in 3/rev) 045 45 ml/rev (2.75 in 3/rev) 代号 类型 P 开式回路用变量柱塞泵 U*通用 代号应用范围 S 工业液压 (PD) M 行走机械 (P1) R 顺时针 (右转)L 逆时针 (左转)代号 转向 代号 轴封 S 单唇轴封 * 并不具有控制功能，仅在运输时予以防护，详情见第7页的控制说明。

Triple-Lok®The universal37° fl ared fi ttingTriple-Lok®Visual indexTube to tubeBulkhead unionTube tomale NPTFTube tomale BSPTTube tomale BSPPTube to straightthread UNFTube tomale metricISO 6149-3Tube tomale metricDIN 3852-1Tube tofemale NPTFHMTX EMTX JMTX KTXp. K9 p. K10 p. K11 p. K14WMTX WEMTX WNTX WJTX WJJTX WLNMp.K15 p.K16 p.K17 p.K18 p.K19 p.K92FMTX CMTXC CTX CCCTX VMTX RMTX SMTXp.K36 p.K51 p.K52 p.K53 p.K59 p.K71 p.K65F3MX C3MX V3MX R3MX S3MXp.K37 p.K54 p.K60 p.K72 p.K66F4OMX F42EDMX C4OMX V4OMX R4OMX S4OMXp.K33 p.K32 p.K49 p.K57 p.K69 p.K63F5OMX FF5OMX C5OMX CC5OX V5OMX R5OMX S5OMX p.K29 p.K31 p.K47 p.K48 p.K56 p.K68 p.K62F87OMX C87OMX V87OMX R87OMX S87OMXp.K28 p.K46 p.K55 p.K67 p.K61F8OMX F82EDMX C8OMX V8OMX R8OMX S8OMXp.K35 p.K34 p.K50 p.K58 p.K70 p.K64GMTX WGMTX DMTX OTX MTX G6Xp.K74 p.K75 p.K76 p.K77 p.K78 p.K79KTriple-Lok ®Triple-Lok®KTriple-Lok ®BTX NutTriple-Lok ® 37° Flare end nut SAE 070110 MS51531Tube Thread Weight O.D. UN/UNF-2B C D L (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ® mm in. T6 in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 5/16-24 3/8 5 14 6 2 BTX-S 2 BTX-SS2 BTX-B 3/16 3/8-24 7/16 6 16 83 BTX-S 3 BTX-SS 3 BTX-B 6 1/4 7/16-20 9/16 8 16 11 4 BTX-S 4 BTX-SS 4 BTX-B 8 5/16 1/2-20 5/8 10 17 145 BTX-S 5 BTX-SS 5 BTX-B 10 3/8 9/16-18 11/16 11 18 18 6 BTX-S 6 BTX-SS 6 BTX-B 12 1/2 3/4-16 7/8 15 22 29 8 BTX-S 8 BTX-SS 8 BTX-B 14, 15, 16 5/8 7/8-14 1 18 25 54 10 BTX-S 10 BTX-SS 10 BTX-B 18, 20 3/4 1 1/16-12 1 1/4 21 26 73 12 BTX-S 12 BTX-SS 12 BTX-B 22 7/8 1 3/16-12 1 3/8 24 28 100 14 BTX-S 14 BTX-SS 14 BTX-B 25 1 1 5/16-12 1 1/2 28 29 104 16 BTX-S 16 BTX-SS 16 BTX-B 28, 30, 32 1 1/4 1 5/8-12 2 34 31 240 20 BTX-S 20 BTX-SS 20 BTX-B 35, 38 1 1/2 1 7/8-12 2 1/4 41 36 325 24 BTX-S 24 BTX-SS 24 BTX-B2 2 1/2-12 2 7/8 55 45 549 32 BTX-S32 BTX-SSOrder codes shown are part of our current manufacturing programme.Triple-Lok®BMTX NutTriple-Lok® 37° Flare end nutSAE 070110Tube Thread WeightO.D. UN/UNF-2B C D L (steel) Triple-Lok® Triple-Lok®Steelpiece Steel Stainless mm in. T6 mm mm mm g/16 1/4 7/16-20 14 8 16 11 4BMTXS 4BMTXSS8 5/16 1/2-20 17 10 17 14 5BMTXS 5BMTXSS10 3/8 9/16-18 19 11 18 18 6BMTXS 6BMTXSS12 1/2 3/4-16 22 15 21 29 8BMTXS 8BMTXSS14, 15, 16 5/8 7/8-14 27 18 25 42 10BMTXS 10BMTXSS 18, 20 3/4 1 1/16-12 32 22 26 73 12BMTXS 12BMTXSS5/16-12 41 28 28 104 16BMTXS 16BMTXSS25 1 128, 30, 32 1 1/4 1 5/8-12 50 34 31 240 20BMTXS 20BMTXSS 35, 38 1 1/2 1 7/8-12 60 41 36 325 24BMTXS 24BMTXSS42 21/4 65 48 40 437 28BMTXS 28BMTXSSOrder codes shown are part of our current manufacturing programme.KTriple-Lok ®Tube WeightO.D. L X (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm mm mm g/1 piece Steel Stainless Steel Brass 6 10 10 2 TXS6 TXSS6 TXB6 8 11 11 2 TXS8 TXSS8 TXB8 10 13 13 2 TXS10 TXSS10 TXB10 12 14 17 7 TXS12 TXSS12 TXB12 14 17 20 13 TXS14 TXSS14 TXB14 15 17 20 10 TXS15 TXSS15 TXB15 16 17 20 7 TXS16 TXSS16 TXB16 18 17 25 16 TXS18 TXSS18 TXB18 20 17 25 12 TXS20 TXSS20 TXB20 22 19 28 25 TXS22 TXSS22 TXB22 25 20 31 21 TXS25 TXSS25 TXB25 28 23 39 40 TXS28 TXSS28 TXB28 30 23 39 45 TXS30 TXSS30 TXB30 32 23 39 30 TXS32 TXSS32 TXB32 35 28 45 60 TXS35 TXSS35 TXB35 38 28 45 51 TXS38 TXSS38 TXB38 422955149TXS42 TXSS42 TXB42Order codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube end sleeve for metric tubes SAE 070105Triple-Lok ®Tube WeightO.D. L X (steel) T riple-Lok ® Triple-Lok ® Triple-Lok ® in. mm mm g/1 piece Steel Stainless Steel Brass 1/8 9 7 22 TX-S 2 TX-SS 2 TX-B 3/169823 TX-S 3 TX-SS 3 TX-B 1/4 10 10 2 4 TX-S 4 TX-SS 4 TX-B 5/16 11 11 25 TX-S 5 TX-SS 5 TX-B 3/8 13 13 36 TX-S 6 TX-SS 6 TX-B 1/2 14 17 68 TX-S 8 TX-SS 8 TX-B 5/8 17 20 8 10 TX-S 10 TX-SS 10 TX-B 3/4 17 25 13 12 TX-S 12 TX-SS 12 TX-B 7/8 19 28 18 14 TX-S 14 TX-SS 14 TX-B 1 20 31 23 16 TX-S 16 TX-SS 16 TX-B 1 1/4 23 39 30 20 TX-S 20 TX-SS 20 TX-B 1 1/2 28 45 51 24 TX-S 24 TX-SS 24 TX-B 2306115632 TX-S32 TX-SS32 TX-BOrder codes shown are part of our current manufacturing programme.TX SleeveTriple-Lok ® 37° Flare tube sleeve SAE 070105 MS51533KTriple-Lok ®Tube 1 Tube 2 Thread Thread Weight PN (bar)O.D. O.D. UN/UNF-2A UN/UNF-2A C D D1 L1 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. mm in. T1 T2 mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS1/8 1/8 5/16-24 5/16-24 11 2 2 30 9 2 HTX-S 500 —3/16 3/16 3/8-24 3/8-24 11 3 3 31 10 3 HTX-S 500 — 6 1/4 6 1/4 7/16-20 7/16-20 13 4 4 35 16 4HMTXS 4HMTXSS 4HMTXB 500 350 6 1/4 1/8 7/16-20 5/16-24 13 5 2 32 12 4-2 HTX-S 4-2HMTXSS 4-2HMTXB 500 350 6 1/4 3/16 7/16-20 3/8-24 13 5 3 33 14 4-3 HTX-S 4-3HMTXSS 4-3HMTXB 500 350 8 5/16 8 5/16 1/2-20 1/2-20 14 6 6 35 18 5HMTXS 5HMTXSS 5HMTXB 420 350 8 5/16 6 1/4 1/2-20 7/16-20 14 6 5 35 18 5-4 HTX-S 5-4HMTXSS 5-4HMTXB 420 350 10 3/8 10 3/8 9/16-18 9/16-18 17 8 8 36 25 6HMTXS 6HMTXSS 6HMTXB 420 350 10 3/8 6 1/4 9/16-18 7/16-20 17 8 4 36 22 6-4HMTXS 6-4HMTXSS 6-4HMTXB 420 350 10 3/8 8 5/16 9/16-18 1/2-20 17 8 6 36 25 6-5 HTX-S 6-5HMTXSS 6-5HMTXB 420 350 12 1/2 12 1/2 3/4-16 3/4-16 19 10 10 41 52 8HMTXS 8HMTXSS 8HMTXB 420 350 12 1/2 6 1/4 3/4-16 7/16-20 21 10 5 39 45 8-4 HTX-S 8-4HMTXSS 8-4HMTXB 420 350 12 1/2 10 3/8 3/4-16 9/16-18 19 10 8 39 45 8-6HMTXS 8-6HMTXSS 8-6HMTXB 420 350 14, 15,16 5/8 14, 15,16 5/8 7/8-14 7/8-14 24 12 12 48 80 10HMTXS 10HMTXSS 10HMTXB 350 350 14, 15,16 5/8 10 3/8 7/8-14 9/16-18 24 13 8 43 60 10-6HMTXS 10-6HMTXSS 10-6HMTXB 350 350 14, 15,16 5/8 12 1/2 7/8-14 3/4-16 24 12 10 45 68 10-8HMTXS 10-8HMTXSS 10-8HMTXB 350 350 18, 20 3/4 18, 20 3/4 1 1/16-12 1 1/16-12 27 16 16 55 125 12HMTXS 12HMTXSS 12HMTXB 350 350 18, 20 3/4 12 1/2 1 1/16-12 3/4-16 29 16 10 50 101 12-8 HTX-S 12-8HMTXSS 12-8HMTXB 350 350 20 3/4 14, 15,16 5/8 1 1/16-12 7/8-14 29 16 12 52 113 12-10HMTXS 12-10HMTXSS 12-10HMTXB 350 350 22 7/8 22 7/8 1 3/16-12 1 3/16-12 32 18 18 56 156 14 HTX-S 14HMTXSS 14HMTXB 280 280 25 1 25 1 1 5/16-12 1 5/16-12 36 22 22 57 131 16HMTXS 16HMTXSS 16HMTXB 280 280 25 1 20 3/4 1 5/16-12 1 1/16-12 36 22 16 56 169 16-12HMTXS 16-12HMTXSS 16-12HMTXB 280 280 28, 30, 32 1 1/4 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 46 28 28 62 271 20HMTXS 20HMTXSS 20HMTXB 280 210 28, 30, 32 1 1/4 25 1 1 5/8-12 1 5/16-12 46 28 22 61 235 20-16HMTXS 20-16HMTXSS 20-16HMTXB 280 210 35, 38 1 1/2 35, 38 1 1/2 1 7/8-12 1 7/8-12 50 33 33 70 382 24HMTXS 24HMTXSS 24HMTXB 210 210 42 42 2 1/4-12 2 1/4-12 60 39 39 71 469 28HMTXS 28HMTXSS 28HMTXB 140 150 2 2 2 1/2-12 2 1/2-12 67 45 45 87 785 32 HTX-S 32HMTXSS 32HMTXB 140 150Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.HMTX UnionTriple-Lok ® 37° Flare ends SAE 070101 MS51501Triple-Lok®EMTX Union elbowTriple-Lok® 37° Flare endsSAE 070201 MS51505(bar) Tube Thread Thread Weight PNY(steel)Triple-Lok® Triple-Lok® Triple-Lok®M1MUN/UNF2-ADD1O.D. UN/UNF-2Amm in. T T1 mm in. mm mm mm g/1 piece Steel Stainless Steel Brass S SS 1/8 5/16-24 5/16-24 2 2 20 20 11 18 2 ETX-S 500—— 3/16 3/8-24 3/8-24 3 3 21 21 11 20 3 ETX-S 500500 3506 1/4 7/16-20 7/16-20 4 4 23 23 11 25 4EMTXS 4EMTXSS 4ETX-B420 350ETX-B8 5/16 1/2-20 1/2-20 6 6 24 24 13 32 5EMTXS 5EMTXSS 5420 35010 3/8 9/16-18 9/16-18 8 8 27 27 14 44 6EMTXS 6EMTXSS 6ETX-B10 3/8 9/16-18 7/16-20 8 4 27 27 14 40 6-4 ETX-S 6-4EMTXSS 6-4 ETX-B 420 350420 350ETX-B12 1/2 3/4-16 3/4-16 10 10 32 32 19 88 8EMTXS 8EMTXSS 812 1/2 3/4-16 3/8-24 10 8 32 29 19 75 8-6 ETX-S 8-6EMTXSS 420 —350 350ETX-B 15,16 5/8 7/8-14 7/8-14 12 12 37 37 22 139 10EMTXS 10EMTXSS 1014,15,16 5/8 7/8-14 3/4-16 12 10 37 34 22 120 10-8 ETX-S 10-8EMTXSS 10-8 ETX-B 350 35014,ETX-B350 3501/16-12 16 16 42 42 27 258 12EMTXS 12EMTXSS 121/16-12 118,20 3/4 11/16-12 3/4-16 16 10 42 46 27 220 12-8 ETX-S 12-8EMTXSS 350 —20 3/4 118,1/16-12 7/8-14 16 12 42 39 27 240 12-10 ETX-S 12-10EMTXSS 350 —20 3/4 118,3/16-12 18 18 44 44 30 273 14 ETX-S 14EMTXSS 280 —22 7/8 13/16-12 1ETX-B280 2805/16-12 22 22 46 46 33 333 16EMTXS 16EMTXSS 165/16-12 125 1 122,5/16-12 11/16-12 22 16 46 45 33 310 16-12 ETX-S 16-12EMTXSS 16-12 ETX-B 280 28025 1 122,ETX-B280 21028, 30, 32 1 1/4 1 5/8-12 1 5/8-12 28 28 52 52 41 586 20EMTXS 20EMTXSS 20210 140ETX-B 35, 38 1 1/2 1 7/8-12 1 7/8-12 33 33 59 59 48 778 24EMTXS 24EMTXSS 24—1/4-12 21/4-12 39 39 74 74 63 1100 28 ETX-S 140 3/4 242 1—1/2-12 45 45 78 78 64 1680 32 ETX-S 1402 21/2-12 2Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KKKTX Union crossTriple-Lok® 37° Flare end (four ends)SAE 070501 MS51517Tube Thread Weight PN(bar)Triple-Lok® Triple-Lok® Triple-Lok®(steel)O.D. UN/UNF-2AD M YSSSteel Brass Spiece Steel Stainless mm in. T mm mm mm g/11/4 7/16-20 4 23 11 41 4 KTX-S 4 KTX-SS 4 KTX-B 500 35065/16 1/2-20 6 24 14 50 5 KTX-S 5 KTX-SS 5 KTX-B 420 350810 3/8 9/16-18 8 27 14 68 6 KTX-S 6 KTX-SS 6 KTX-B 420 35012 1/2 3/4-16 10 32 19 144 8 KTX-S 8 KTX-SS 8 KTX-B 420 35014, 15,16 5/8 7/8-14 12 37 22 220 10 KTX-S 10 KTX-SS 10 KTX-B 350 350 18, 20 3/4 1 1/16-12 16 42 27 345 12 KTX-S 12 KTX-SS 12 KTX-B 350 350 5/16-12 22 46 33 588 16 KTX-S 16 KTX-SS 16 KTX-B 280 28025 1 1Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WMTX Bulkhead unionTriple-Lok ® 37° Flare ends SAE 070601 MS51520Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I1 L4 (steel) Triple-Lok ® Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm g/1 piece Steel Stainless Steel BrassS SS6 1/4 7/16-20 17 4 31 53 41 4WMTXWLNMS 4WMTXWLNMSS 4WMTXWLNMB 500 3508 5/16 1/2-20 19 6 31 53 49 5WMTXWLNMS 5WMTXWLNMSS 5WMTXWLNMB 420 350 10 3/8 9/16-18 22 8 33 55 64 6WMTXWLNMS 6WMTXWLNMSS 6WMTXWLNMB 420 350 12 1/2 3/4-16 24 10 37 62 111 8WMTXWLNMS 8WMTXWLNMSS 8WMTXWLNMB 420 350 14, 15,16 5/8 7/8-14 30 12 40 70 157 10WMTXWLNMS 10WMTXWLNMSS 10WMTXWLNMB 350 350 18, 20 3/4 1 1/16-12 36 16 44 79 254 12WMTXWLNMS 12WMTXWLNMSS 12WMTXWLNMB 350 350 22 7/8 1 3/16-12 38 18 45 80 296 14 WTX-WLN-S 14WMTXWLNMSS 14WMTXWLNMB 280 280 25 1 1 5/16-12 41 22 44 80 337 16WMTXWLNMS 16WMTXWLNMSS 16WMTXWLNMB 280 280 28, 30, 32 1 1/4 1 5/8-12 50 28 46 84 462 20WMTXWLNMS 20WMTXWLNMSS 20WMTXWLNMB 280 210 35, 38 1 1/2 1 7/8-12 55 33 46 89 695 24WMTXWLNMS 24WMTXWLNMSS 24WMTXWLNMB 210 140Order codes shown are part of our current manufacturing programme. Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WMTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.WEMTX Bulkhead union elbowTriple-Lok® 37° Flare endsSAE 070701 MS51507(bar) Tube Thread Weight PNM4YM3(steel) Triple-Lok® Triple-Lok® Triple-Lok®I2C2O.D. UN/UNF-2ADmm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel Brass S SS6 1/4 7/16-20 17 4 26 25 40 11 44 4 WETX-WLN-S 4 WETX-WLN-SS 4 WETX-WLN-B 500 3508 5/16 1/2-20 19 6 26 27 44 13 59 5 WETX-WLN-S 5 WETX-WLN-SS 5 WETX-WLN-B 420 35010 3/8 9/16-18 22 8 28 28 46 14 72 6WEMTXWLNMS 6 WETX-WLN-SS 6 WETX-WLN-B 420 35012 1/2 3/4-16 24 10 32 36 54 19 145 8WEMTXWLNMS 8 WETX-WLN-SS 8 WETX-WLN-B 420 350 14,15,16 5/8 7/8-14 30 12 35 40 61 22 212 10WEMTXWLNMS 10 WETX-WLN-SS 10 WETX-WLN-B 350 350 1/16-12 36 16 40 45 68 27 345 12WEMTXWLNMS 12 WETX-WLN-SS 12 WETX-WLN-B 350 35020 3/4 118,3/16-12 38 18 40 49 71 33 370 14 WETX-WLN-S 14 WETX-WLN-SS 280 —22 7/8 15/16-12 41 22 40 49 71 33 474 16 WETX-WLN-S 16 WETX-WLN-SS 280 —25 1 128, 30, 32 1 1/4 1 5/8-12 48 28 41 55 80 41 753 20 WETX-WLN-S 20 WETX-WLN-SS 280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLNM” (e. g. 16WETX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.For Brass parts reduce pressures by 35%.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead union Shape bulkhead unionMax. thickness Max. thicknessSize inch metric mm mm4 1/4 6 8.4 5.35 5/16 8 8.4 5.36 3/8 10 10.7 7.18 1/2 12 11.2 8.410 5/8 14–16 10.9 8.112 3/4 18–20 11.2 8.614 7/8 10.4 7.916 1 22–25 9.9 7.41/4 28–32 10.2 7.420 11/2 35–38 7.1 —24 132 2 7.1 —KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WNTX 45° Bulkhead union elbowTriple-Lok ® 37° Flare ends SAE 070801 MS51509Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M2 M9 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 18 39 11 324 WNTX-WLN-S 4 WNTX-WLN-SS 500 350 8 5/16 1/2-20 19 6 26 20 42 14 415 WNTX-WLN-S 420 —10 3/8 9/16-18 21 8 28 21 42 14 48 6 WNTX-WLN-S 6 WNTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 25 49 19 105 8 WNTX-WLN-S 8 WNTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 28 55 22 152 10 WNTX-WLN-S 10 WNTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 33 62 27 245 12 WNTX-WLN-S 12 WNTX-WLN-SS 350 350 22, 25 1 1 5/16-12 41 22 40 37 65 33 355 16 WNTX-WLN-S 16 WNTX-WLN-SS 280 28028, 30, 321 1/41 5/8-12 48 28 41 40 67 4146520 WNTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WNTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.Maximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJTX Bulkhead branch teeTriple-Lok ® 37° Flare ends SAE 070959 MS51515Tube Thread WeightPN (bar) O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS6 1/4 7/16-20 17 4 26 25 40 11 454 WJTX-WLN-S 4 WJTX-WLN-SS 500 35010 3/8 9/16-18 21 8 28 28 46 14 71 6 WJTX-WLN-S 6 WJTX-WLN-SS 420 350 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJTX-WLN-S 8 WJTX-WLN-SS 420 350 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 297 10 WJTX-WLN-S 10 WJTX-WLN-SS 350 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 379 12 WJTX-WLN-S 12 WJTX-WLN-SS 350 35022, 25 1 1 5/16-12 42 22 40 49 71 33 420 16 WJTX-WLN-S 280 — 28, 30, 321 1/41 5/8-12 48 28 41 55 79 4150020 WJTX-WLN-S280 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJTX)PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.KMaximum bulkhead wallthicknessTube O.D. Straight bulkhead unionShape bulkhead unionMax. thicknessMax. thicknessSize inch metric mmmm4 1/4 6 8.4 5.35 5/16 8 8.4 5.3 6 3/8 10 10.7 7.18 1/2 12 11.2 8.4 10 5/8 14–16 10.9 8.1 12 3/4 18–2011.2 8.6 14 7/8 10.4 7.9 16 1 22–25 9.9 7.4 20 1 1/4 28–32 10.2 7.4 24 1 1/235–387.1 — 3227.1—WJJTX Bulkhead run teeTriple-Lok ® 37° Flare ends SAE 070958 MS51516Tube Thread Weight O.D. UN/UNF-2A C2 D I2 M3 M4 Y (steel) Triple-Lok ® PN mm in. T mm mm mm mm mm mm g/1 piece Steel (bar)6 1/4 7/16-20 17 4 26 25 40 11584 WJJTX-WLN-S 50010 3/8 9/16-18 21 8 28 28 46 14756 WJJTX-WLN-S 420 12 1/2 3/4-16 25 10 32 35 54 19 158 8 WJJTX-WLN-S 420 14, 15,16 5/8 7/8-14 29 12 35 40 61 22 309 10 WJJTX-WLN-S 350 18, 20 3/4 1 1/16-12 35 16 40 45 68 27 340 12 WJJTX-WLN-S 350 22, 25 1 1 5/16-12 42 22 40 49 71 36 390 16 WJJTX-WLN-S 280 28, 30, 32 1 1/4 1 5/8-1248 28 41 55 79 4145020 WJJTX-WLN-S280Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.For the version without the locknut remove “WLN” (e.g. 16 WJJTX)PN (bar)= PN (MPa)10Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 3/16 3/8-24 3/8-24 13 3 21 25 16 11273 C6X-S 500 — 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 37 4C6MXS 4C6MXSS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 43 5C6MXS 5C6MXSS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 54 6C6MXS 6C6MXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 105 8C6MXS 8C6MXSS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 162 10C6MXS 10C6MXSS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 260 12C6MXS 12C6MXSS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 293 14 C6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 420 16C6MXS 16C6MXSS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 679 20 C6X-S 20C6MXSS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 747 24 C6X-S 24C6MXSS 170 140 22 1/2-12 2 1/2-12 73 45 78 89 62 6692032 C6X-S 110 —Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.C6MX Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel end SAE 070221 MS51521KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M2 M6 M11 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 14 4 18 24 15 11 30 4 V6X-S 4 V6X-SS 500 350 8 5/16 1/2-20 1/2-20 16 6 20 25 16 14 45 5 V6X-S 5 V6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 21 28 19 14 47 6 V6X-S 6 V6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 25 33 22 19 89 8V6MXS 8 V6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 28 37 24 22 131 10 V6X-S 10 V6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 33 38 24 27 203 12 V6X-S 12 V6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 35 41 28 30 291 14 V6X-S 250 — 25 1 1 5/16-12 1 5/16-12 38 22 37 44 29 33 335 16 V6X-S 16 V6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 51 27 40 52 36 41 572 20 V6X-S 20 V6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 45 58 39 48 715 24 V6X-S 24 V6X-SS 170 140 2 2 1/2-12 2 1/2-12 72 45 56 70 50 66 960 32 V6X-S 32 V6X-SS 110 110Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.V6MX 45° Swivel nut elbowTriple-Lok ® 37° Flare end / Triple-Lok ® 37° Flare female swivel endSAE 070321 MS51522Tube Thread Thread Weight PN (bar)O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/47/16-20 7/16-20 16 4 23 25 17 11 44 4 S6X-S 4 S6X-SS 500 350 8 5/161/2-20 1/2-20 17 6 24 27 17 13 58 5S6MXS 5 S6X-SS 420 350 10 3/89/16-18 9/16-18 19 8 27 32 22 14 71 6S6MXS 6 S6X-SS 350 350 12 1/23/4-16 3/4-16 22 10 32 35 24 19 133 8S6MXS 8 S6X-SS 350 350 14, 15,16 5/87/8-14 7/8-14 27 12 37 41 28 22 203 10S6MXS 10 S6X-SS 350 350 18, 20 3/41 1/16-12 1 1/16-12 32 16 42 44 30 27 328 12S6MXS 12 S6X-SS 350 350 25 11 5/16-12 1 5/16-12 38 22 46 51 36 33 483 16S6MXS 16 S6X-SS 250 250 28, 30, 32 1 1/41 5/8-12 1 5/8-12 50 28 52 59 43 41 708 20 S6X-S 20 S6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 68 49 48 1100 24 S6X-S 24 S6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.S6MX Swivel nut branch teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070433 MS51524KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2B C3 D M M5 M10 Y (steel) Triple-Lok ® Triple-Lok ®mm in. T T6 mm mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 7/16-20 7/16-20 16 4 23 25 17 11 44 4 R6X-S 4 R6X-SS 500 350 8 5/16 1/2-20 1/2-20 17 6 24 27 17 13 56 5R6MXS 5 R6X-SS 420 350 10 3/8 9/16-18 9/16-18 19 8 27 32 22 14 69 6R6MXS 6 R6X-SS 350 350 12 1/2 3/4-16 3/4-16 22 10 32 35 24 19 136 8R6MXS 8 R6X-SS 350 350 14, 15,16 5/8 7/8-14 7/8-14 27 12 37 41 28 22 207 10R6MXS 10 R6X-SS 350 350 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 42 44 30 27 319 12R6MXS 12 R6X-SS 350 350 22 7/8 1 3/16-12 1 3/16-12 35 18 46 45 34 33 622 14 R6X-S 14 R6X-SS 250 250 25 1 1 5/16-12 1 5/16-12 38 22 46 51 36 33 489 16R6MXS 16 R6X-SS 250 250 28, 30, 32 1 1/4 1 5/8-12 1 5/8-12 50 28 52 59 43 41 712 20R6MXS 20 R6X-SS 250 210 35, 38 1 1/2 1 7/8-12 1 7/8-12 57 33 59 66 47 48 1100 24 R6X-S 24 R6X-SS 170 170Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar)= PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.R6MX Swivel nut run teeTriple-Lok ® 37° Flare ends / Triple-Lok ® 37° Flare female swivel endSAE 070432KKTubeThread Thread Weight PN (bar) O.D.Metric UN/UNF-2A L D C U (steel) Triple-Lok ® Triple-Lok ® mm in. T87 T mm mm mm mm g/1 piece Steel Stainless Steel S SS 6 1/4 M10 × 1.0 7/16-20 30 14 14 9 25 4M10F87OMXS 4M10F87OMXSS 500 350 8 5/16 M10 × 1.0 1/2-20 30 14 14 9 30 5M10F87OMXS 5M10F87OMXSS 420 350 8 5/16 M12 × 1.5 1/2-20 33 14 19 11 37 5M12F87OMXS 5M12F87OMXSS 420 350 8 5/16 M14 × 1.5 1/2-20 34 14 19 11 40 5M14F87OMXS 5M14F87OMXSS 420 350 10 3/8 M14 × 1.5 9/16-18 34 14 19 11 44 6M14F87OMXS 6M14F87OMXSS 420 350 10 3/8 M16 × 1.5 9/16-18 36 14 22 12 53 6M16F87OMXS 6M16F87OMXSS 420 350 10 3/8 M18 × 1.5 9/16-18 37 14 24 13 60 6M18F87OMXS 6M18F87OMXSS 350 350 12 1/2 M14 × 1.5 3/4-16 36 17 19 11 41 8M14F87OMXS 8M14F87OMXSS 420 350 12 1/2 M16 × 1.5 3/4-16 38 17 22 12 57 8M16F87OMXS 8M16F87OMXSS 420 350 12 1/2 M18 × 1.5 3/4-16 39 17 24 13 71 8M18F87OMXS 8M18F87OMXSS 350 350 14, 15,16 5/8 M14 × 1.5 7/8-14 41 19 24 11 73 10M14F87OMXS 10M14F87OMXSS 350 350 14, 15,16 5/8 M18 × 1.5 7/8-14 43 19 24 13 75 10M18F87OMXS 10M18F87OMXSS 350 350 14, 15,16 5/8 M22 × 1.5 7/8-14 44 19 27 13 98 10M22F87OMXS 10M22F87OMXSS 350 350 14, 15,16 5/8 M27 × 2.0 7/8-14 46 19 32 16 75 10M27F87OMXS 10M27F87OMXSS 350 350 18, 20 3/4 M22 × 1.5 1 1/16-12 48 22 27 13 104 12M22F87OMXS 12M22F87OMXSS 350 350 18, 20 3/4 M27 × 2.0 1 1/16-12 51 22 32 16 158 12M27F87OMXS 12M27F87OMXSS 350 350 25 1 M27 × 2.0 1 5/16-12 51 23 36 16 206 16M27F87OMXS 16M27F87OMXSS 280 280 25 1 M33 × 2.0 1 5/16-12 53 23 41 16 273 16M33F87OMXS 16M33F87OMXSS 280 280 28, 30, 32 1 1/4 M42 × 2.0 1 5/8-12 55 24 50 16 431 20M42F87OMXS 20M42F87OMXSS 280 210 35, 38 1 1/2 M48 × 2.0 1 7/8-12 59 28 55 18 564 24M48F87OMXS 24M48F87OMXSS 210 140Steel, stainless steel and brass Triple-Lok ® parts are delivered with NBR elastomeric seals as standard. For more details on other seal materials see page K93.Order codes shown are part of our current manufacturing programme.Imperial and metric parts may vary in hexagon dimensions.PN (bar) = PN (MPa)10Pressure ratings – PN shown, apply to Steel and Stainless Steel versions of the product.F87OMX Male stud connectorTriple-Lok ® 37° Flare end / Male metric thread – O-ring (ISO 6149)KTube Thread Thread Weight PN (bar) O.D. UN/UNF-2A UN/UNF-2A C4 D D2 L5 LL (steel) Triple-Lok ® Triple-Lok ®mm in. T5 T mm mm mm mm mm g/1 piece Steel Stainless Steel S SS 1/8 5/16-24 5/16-24 11 2 2 27 19 8 2 F5OX-S 500 — 3/16 3/8-24 3/8-24 13 3 3 28 20 10 3 F5OX-S 500 — 3/16 5/16-24 3/8-24 13 3 2 28 20 9 3-2 F5OX-S 500 — 6 1/4 7/16-20 7/16-20 14 4 4 31 22 15 4F5OMXS 4F5OMXSS 500 350 6 1/4 3/8-24 7/16-20 14 5 3 30 23 12 4-3 F5OX-S 4-3F5OMXSS 500 350 6 1/4 1/2-20 7/16-20 16 4 6 31 22 25 4-5 F5OX-S 4-5F5OMXSS 420 350 6 1/4 9/16-18 7/16-20 17 4 4 33 23 27 4-6F5OMXS 4-6F5OMXSS 420 350 6 1/4 3/4-16 7/16-20 22 4 10 35 24 35 4-8 F5OX-S 4-8F5OMXSS 420 350 6 1/4 7/8-14 7/16-20 25 5 5 38 25 60 4-10 F5OX-S 4-10F5OMXSS 350 350 8 5/16 1/2-20 1/2-20 16 6 6 31 22 18 5F5OMXS 5F5OMXSS 420 350 8 5/16 7/16-20 1/2-20 14 6 5 31 22 18 5-4 F5OX-S 5-4F5OMXSS 420 350 8 5/16 9/16-18 1/2-20 17 6 6 33 23 25 5-6 F5OX-S 5-6F5OMXSS 420 350 8 5/16 3/4-16 1/2-20 22 6 6 35 24 40 5-8 F5OX-S 5-8F5OMXSS 420 350 10 3/8 9/16-18 9/16-18 17 8 8 33 23 25 6F5OMXS 6F5OMXSS 420 350 10 3/8 7/16-20 9/16-18 16 8 4 32 23 40 6-4 F5OX-S 6-4F5OMXSS 420 350 10 3/8 1/2-20 9/16-18 16 8 6 32 23 56 6-5 F5OX-S 6-5F5OMXSS 420 350 10 3/8 3/4-16 9/16-18 22 8 8 35 24 44 6-8F5OMXS 6-8F5OMXSS 420 350 10 3/8 7/8-14 9/16-18 25 8 12 38 25 85 6-10 F5OX-S 6-10F5OMXSS 350 350 10 3/8 1 1/16-12 9/16-18 32 8 16 42 27 100 6-12 F5OX-S 6-12F5OMXSS 350 350 12 1/2 3/4-16 3/4-16 22 10 10 38 27 58 8F5OMXS 8F5OMXSS 420 350 12 1/2 7/16-20 3/4-16 21 10 5 38 29 40 8-4 F5OX-S 8-4F5OMXSS 420 350 12 1/2 9/16-18 3/4-16 19 10 10 37 27 44 8-6F5OMXS 8-6F5OMXSS 420 350 12 1/2 7/8-14 3/4-16 27 10 10 41 28 73 8-10F5OMXS 8-10F5OMXSS 350 350 12 1/2 1 1/16-12 3/4-16 32 10 10 45 30 126 8-12F5OMXS 8-12F5OMXSS 350 350 12 1/2 1 5/16-12 3/4-16 41 10 10 45 30 160 8-16 F5OX-S 8-16F5OMXSS 310 310 14, 15,16 5/8 7/8-14 7/8-14 27 12 12 43 31 75 10F5OMXS 10F5OMXSS 350 350 14, 15,16 5/8 9/16-18 7/8-14 18 13 8 43 34 60 10-6 F5OX-S 10-6F5OMXSS 350 350 14, 15,16 5/8 3/4-16 7/8-14 24 12 10 42 31 65 10-8F5OMXS 10-8F5OMXSS 350 350 14, 15,16 5/8 1 1/16-12 7/8-14 32 12 12 47 32 132 10-12F5OMXS 10-12F5OMXSS 350 350 14, 15,16 5/8 1 5/16-12 7/8-14 41 13 13 48 33 170 10-16 F5OX-S 10-16F5OMXSS 310 310 18, 20 3/4 1 1/16-12 1 1/16-12 32 16 16 50 35 134 12F5OMXS 12F5OMXSS 350 350 18, 20 3/4 3/4-16 1 1/16-12 29 16 10 49 38 104 12-8 F5OX-S 12-8F5OMXSS 350 350 18, 20 3/4 7/8-14 1 1/16-12 27 16 12 48 35 108 12-10F5OMXS 12-10F5OMXSS 350 350 18, 20 3/4 1 3/16-12 1 1/16-12 35 16 16 50 35 170 12-14 F5OX-S 12-14F5OMXSS 310 310 18, 20 3/4 1 5/16-12 1 1/16-12 38 16 16 51 35 197 12-16F5OMXS 12-16F5OMXSS 310 310 18, 20 3/4 1 5/8-12 1 1/16-12 48 16 16 53 38 230 12-20 F5OX-S 12-20F5OMXSS 280 280 22 7/8 1 3/16-12 1 3/16-12 35 18 18 51 36 174 14 F5OX-S 14F5OMXSS 280 280 22 7/8 1 5/16-12 1 3/16-12 38 18 22 51 36 223 14-16 F5OX-S 14-16F5OMXSS 280 280 25 1 1 5/16-12 1 5/16-12 38 22 22 52 37 203 16F5OMXS 16F5OMXSS 280 280 25 1 3/4-16 1 5/16-12 35 22 10 45 34 160 16-8 F5OX-S 16-8F5OMXSS 280 280Continued on page K30F5OMX Male stud connectorTriple-Lok ® 37° Flare end / Male UN/UNF thread – O-ring (ISO 11926)SAE 070120 MS51525。

Catalog HY15-3502/USLogic Elements ContentsParker Hannifin CorporationSERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.LPM/GPM BAR/PSIPOPPET TYPE10SLC1-A.........C10-3S........Normally Closed, Pilot to Close.......................57/15......240/3500......................LE7 16SLC1-A.........C16-3S........Normally Closed, Pilot to Close.....................189/50......240/3500......................LE8 20SLC1-A.........C20-3S........Normally Closed, Pilot to Close.....................303/80......240/3500......................LE916SLC1-C.........C16-3S........Normally Closed, Vent to Open.....................189/50......240/3500....................LE10SPOOL TYPE10SLC2-A.........C10-3S........Normally Closed, Pilot to Close.......................57/15......240/3500....................LE11 16SLC2-A.........C16-3S........Normally Closed, Pilot to Close.....................189/50......240/3500....................LE12 20SLC2-A.........C20-3S........Normally Closed, Pilot to Close.....................303/80......240/3500....................LE13R04E3...............C10-3S........Normally Closed, Pilot to Close.....................170/45......420/6000....................LE14 R06E3...............C16-3S........Normally Closed, Pilot to Close..................400/106......420/6000....................LE15 R08E3...............C20-3S........Normally Closed, Pilot to Close..................500/132......420/6000....................LE1610SLC2-B.........C10-3S........Normally Closed, Vent to Open.......................57/15......240/3500....................LE17 16SLC2-B.........C16-3S........Normally Closed, Vent to Open.....................189/50......240/3500....................LE18 20SLC2-B.........C20-3S........Normally Closed, Vent to Open.....................303/80......240/3500....................LE19R04F3...............C10-3S........Normally Closed, Vent to Open.....................170/45......420/6000....................LE20 R06F3...............C16-3S........Normally Closed, Vent to Open..................400/106......420/6000....................LE21 R08F3...............C20-3S........Normally Closed, Vent to Open..................500/132......420/6000....................LE2210SLC3-A.........C10-3S........Normally Open, Vent to Close.........................57/15......240/3500....................LE23 16SLC3-A.........C16-3S........Normally Open, Vent to Close.......................189/50......240/3500....................LE24R04H3..............C10-3S........Normally Open, Vent to Close.........................57/15......420/6000....................LE25 R06H3..............C16-3S........Normally Open, Vent to Close.......................160/42......420/6000....................LE2610SLC3-B.........C10-3S........Normally Open, Vent to Close.........................57/15......240/3500....................LE27 16SLC3-B.........C16-3S........Normally Open, Vent to Close.......................189/50......240/3500....................LE28R04G3..............C10-3S........Normally Open, Vent to Close.........................57/15......420/6000....................LE29 R06G3..............C16-3S........Normally Open, Vent to Close.......................160/42......420/6000....................LE30LE1Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE2LE3Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationCatalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE4LE5Logic ElementsCatalog HY15-3502/USTechnical TipsParker Hannifin CorporationDIRECTIONAL CONTROL EXAMPLESTHREE-WAY BRIDGE CIRCUITS Circuit 1, with **SLC1A poppet logic element.Circuit 2, with **SLC2A/R0*E3spool logic element.Circuit 3, with **SLC2A/R0*E3spool logic element.NOTE: Pilot pressure must exceed load pressure in order for valve to close.FOUR-WAY BRIDGE CIRCUITSCircuit 1, with **SLC1A poppet logic elements.Circuit 2, with **SLC2A/R0*E3 spool logic elements.Required Flow PathPilot Pressure Applied To PA PB 123Available From CircuitNONOXXYESNO X X XRequired Flow PathPilot Pressure Applied To PA PB 123Available From CircuitNOYESXXNO YES X XPilot Pressure Applied To P1P2P3P4P5Required Flow PathPilot Pressure Applied To P1P2P3P4P5Required Flow PathPilot Pressure Applied To P1P2P3P4P5Required Flow PathYES YES YES YES YESNO NO NO NO NOYES YESNO NO NONONO YES YES NOYES YES YES YESNOYESNONOYES YESNO YES YES NO YESYES YES NO YES YESNO YES YES YES YESNO YES NO YES YESYESNOYESNOYESYES YES YES NO YESYES NO YES YES YESP APBBACBAP APB CPB BP A ACABC ABCABC ABCPP5TP1P2A P3BP4P2A P1PP5TP4BP3ABP T ABPTABP T ABPTABP T ABP T ABP T ABP T ABP T ABPTABP T ABP T ABP T NOTE: Pilot pressure must exceed load pressure in order for valve to close.Catalog HY15-3502/USLogic Elements Technical TipsParker Hannifin CorporationLE6LE7Catalog HY15-3502/USPoppet Type Logic Valve Series 10SLC1-AParker Hannifin CorporationTechnical Information(3)Poppet Type Logic ValveSeries 16SLC1-A Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(3)(2)LE8LE9Catalog HY15-3502/USPoppet Type Logic Valve Series 20SLC1-AParker Hannifin CorporationTechnical Information(1)(3)(2)Poppet Type Logic ValveSeries 16SLC1-C Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(3)(2)LE10LE11Catalog HY15-3502/USSpool Type Logic Valve Series 10SLC2-AParker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries 16SLC2-A Catalog HY15-3502/USParker Hannifin CorporationTechnical Information(1)(3) (2)LE12LE13Catalog HY15-3502/USSpool Type Logic Valve Series 20SLC2-AParker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries R04E3Catalog HY15-3502/USParker Hannifin CorporationTechnical InformationLE14LE15Catalog HY15-3502/USSpool Type Logic Valve Series R06E3Parker Hannifin CorporationTechnical InformationSpool Type Logic ValveSeries R08E3Catalog HY15-3502/USParker Hannifin CorporationTechnical InformationLE16LE17Catalog HY15-3502/USSpool Type Logic Valve Series 10SLC2-BParker Hannifin CorporationTechnical Information(1)(3) (2)LE18Parker Hannifin CorporationLE19Parker Hannifin CorporationSeries R04F3Parker Hannifin CorporationTechnical InformationLE20LE21Parker Hannifin CorporationSeries R08F3Parker Hannifin CorporationTechnical InformationLE22LE23Parker Hannifin CorporationSeries 16SLC3-AParker Hannifin CorporationTechnical Information(2)(3) (1)LE24LE25Parker Hannifin CorporationSeries R06H3Parker Hannifin CorporationTechnical InformationLE26LE27Parker Hannifin CorporationLE28Series 16SLC3-BParker Hannifin CorporationTechnical Information (2)(3)(1)LE29Parker Hannifin CorporationLE30Spool Type Logic Valve Series R06G3Catalog HY15-3502/USParker Hannifin CorporationHydraulic Cartridge SystemsTechnical Information。