ARINC 600 BKAD/E/F Low insertion force contacts.Both environmental and non- environmentalversions.Polarizing posts that are removable from themating face.Field replaceable inserts for size 22 andpower contacts.Up to 800 size 22 contacts in one connector.Crimp, coax, power, printed circuit and wirewrappable post style contacts.Uses standard DPX crimp, insertion/extractiontooling.Waveguide connections available.BKAD/EBKAD/E connectors represent a major milestones in presenting a new rack and panel connector for support of the air transportation market.Several important design concerns have been ad-dressed and solved in this new series. High mating forces of pluggable modules in a rack have been reduced by approximately two-thirds.The low insertion force contacts are also inter-changeable with the contacts used in the DPX series and permit retrofit of existing equipment.BKAFThis new connector is totally intermateable and intermountable with ARINC 600 connectors now in the field.The BKAF permits the user to easily replace a contact in case of problems, rather than disas-semble the entire connector--it is available with size 22 contacts in wrap post or solder-tail ver-sions. The system maintains the advantages of low insertion force technology incorporated in all ARINC 600 connectors.Rear Release/Rear Removable Size 12, 16, 20, 22 Crimp Contacts Front Release/Front RemovableSize 22 Solder Tail and Wrap Post ContactsPos-Aline Connector Construction FeatureMaterial Specifications In the ARINC 600 connector series, Size 22 con-tacts are the only size that utilize this designfeature. The hooded socket extends from its in-sulator while the pin contacts are shrouded by itsfront insulator.All other contacts used in this series employ stan-dard contact design.The result is that the complement of contacts forthe plug connectors will consist of pin contacts forsize 22 and socket contacts for all others. Thereceptacle contacts will be just the reverse, socketcontact for size 22 and pin contacts for thebalance.Shell & WaveguideBKAD BKAE BKAF SpecificationsInsulatorContactsGrommets/Seals O-Ring FinishMaterialMaterialMaterialFinishTerminationMaterialMaterial1200AlodineThermosetAluminum alloyCopper alloyGold over NickelCrimpN/AN/A1200AlodineThermosetAluminum alloyCopper alloyGold over NickelCrimpSilicone-based ElastomerSilicone-based Elastomer1200AlodineThermosetAluminum alloyCopper alloyGold over NickelP.C./Wrap PostN/AN/AMIL-C-5541N/AQQ A-591/A380QQ-C-533MIL-G-45204N/AN/AN/A* = For Polarizing Position greater then 99, add third digit. ARINC 600 BKAD/E/FCONNECTOR SERIES CLASS SHELL SIZECONNECTOR LAYOUT DESCRIPTION SIZE 1 COAX INSERT MODIFIER BOEING COAX MODIFIER SHELL STYLECONNECTOR MOUNTING MODIFIER POLARIZING POSITIONMODIFIER (Contact, Finish, Material)How to OrderBKA D 2 A234 M * 3 00 01 * F0CONNECTOR SERIESBOEING COAX MODIFIERSHELL STYLECONNECTOR MOUNTING MODIFIERCLASSNon-environmental (rear release, crimp contacts)Environmental (rear release, crimp con-tacts)Non-environmental (front release, solder and wrap post #22 contact, rear release all others)Same as E, except uses BKAD shells, and Less 0 rings on plug side.Environmental (0-ring is used to seal between connector shell and insulators)with rear release, crimp contacts.Non-environmental connector using fil-tered contacts (reference Cannon Phoe-nix)Max. contact capacity - 125Max. contact capacity - 400Max. contact capacity - 800Connector contains modified 71W1 or 2W2 insert (four MTG screw hole loca-tions and coaxial contact used in this insert are interchangeable between dif-ferent manufacturersPlug (rack side)Receptacle (box side)Standard design, .148 dia. holesWith #6-32 ESNA (#12 NCFMA2-62) clinch nuts (see chart)Size 1 receptacle only - less 3 printed circuit board mounting lugsWith #4-40 ESNA (#22 NCFMA2-40) clinch nuts (see chart)Size 2 and 3 plug and receptacle only - with #4-40 ESNA (#22 NCFMA2-40) clinch nuts (all mounting holes)Size 2 and 3 plug and receptacle only - with #6-32 ESNA (#12 NCFMA2-62) clinch nuts (all mounting holes)Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with non-environmental inserts.Same as - 00 mounting modification except with nickel finished shells .0008 - .0012 thick with EMI grounding spring for plug shells and supplied with environmental inserts not potted into shell.With floating eyelets (.048 min. radial float)4 corner holes per connector.Consult factory if other modifications are requiredSHELL SIZECONNECTOR LAYOUT DESCRIPTIONSIZE 1 COAX INSERT MODIFIERNOTE: A dash must be inserted whenever code does not apply.D BKA (Per ARINC 600)E FC ST 3 -4 -00 -01 -02 -03 -08 -09 -16 -17 -23 -M123(See page 4)----------Boeing Coax Code Connector Size1234484610Number of Clinch Nuts Plug ReceptacleITTC Code Plug Connector Receptacle Connector ITTC Coax Contacts SuppliedAA AB AC AD AE AFBlank B C D E FNo Coax Supplied 349-0013-000 349-0015-000 349-0013-000 349-0017-000 349-0015-000 349-0018-000 349-0015-000 349-0017-000No Coax Supplied 349-0014-000 349-0016-000 349-0014-000 349-0002-000 349-0016-000 349-0004-000 349-0016-000 349-0002-000AR INC 600 B K AD/E/FHow to Order (Continued)CONNECTOR LAYOUT DESCRIPTION NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUESTPOLARIZING POSITIONMODIFIER (Contact, Finish, Material)01 thru 99 (per ARINC 600)Blank-Polarizing posts or keys not installed but supplied with connectorBlank -SC -WC -WD -SD -WA -WB -Rear release, crimp, signal and powercontacts supplied with connector (when applicable)Contacts not supplied with connector (FO not stamped on connector)Less contacts and waveguide (FOO notstamped on connector)Front release .025(0.63) D. x .150(3.81) solder post and crimp, rear re-lease power contacts (when applica-ble) supplied with connectorFront release .025(0.63) D. x .250(6.35) solder post and crimp, rear re-lease power contacts (when applica-ble) supplied with connectorFront release .025(0.63) D. x .375(9.53) solder post and crimp, rear re-lease power contacts (when applica-ble) supplied with connectorFront release .025(0.63) D. x .500(12.7) solder post and crimp, rear re-lease power contacts (when applica-ble) supplied with connectorFront release .025(0.63) Sq. x .250(6.35) (1 wrap) wrap post and crimp,rear release power contacts (when ap-plicable) supplied with connector Front release .025(0.63 Sq. x .375(9.53) (2 wraps) wrap post and crimp,rear relase power contacts (when ap-plicable) supplied with connectorFront release .025(0.63) Sq. x 500(12.7) (3 wraps) wrap post and crimp,rear release power contacts (when ap-plicable) supplied with connector Front release .025 (0.64) Sq. x 641(16.28) (3 wraps) wrap post and crimp, rear release power contacts (when applicable) supplied with con-nectorNOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELYFO -FOO -SA -SB -Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, yout included in the following ARINC configurations 707, 718 & 730.Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, yout included in the following ARINC configurations 701, 717, 726, 729.Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory.Shell Dimensions - Size 1PlugRetainer Plate *This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.For further information, refer to ARINC 600 specification or consult factory.Size 1 Receptacle Panel CutoutRetainer Plate Size 1 Plug Panel CutoutReceptacleFor further information, refer to ARINC 600 specification or consult factory.* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.BKAE SERIES 1.550 (39.37) MAXCBABKAE SERIES 1.670 (42.42)Shell Dimensions - Size 2 Plug11550 (39.37) MAXBKAE SERIES130 (3.30.120 (3.05)1.317 (33.45).355 (9.02)1.5301.670 (42.42)Retainer Plate*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.For further information, refer to ARINC 600 specification or consult factory.Size 2 Receptacle Panel Cutout Retainer Plate Size 2 Plug Panel Cutout ReceptacleFor further information, refer to ARINC 600 specification or consult factory.* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.Shell Dimensions - Size 3BKAE SERIES 1.550 (39.37) MAX1.670 (42.42 )MAXRetainer Plate ReceptaclePlugSize 3 Plug Panel Cutout* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.For furter information, refer to ARINC 600 specification or consult factory.Retainer Plate Size 3 Plug Panel Cutout* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.For furter information, refer to ARINC 600 specification or consult factory.Contact Arrangements - Shell Size 1Contact Arrangements - Shell Sizes 2 and 3BKAD/BKAE (Plug Rear face shown)BKAD/BKAE (Plug Rear face shown)REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS**Pending ARINC release.NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert.(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)30T228 #222 #8 TWINAX/COAX (#8 Grounded toShell)6060 #226**6 #86T6**6 #8(Metallic Insert)13W24 #20, 4 #12, 3 #162 #5 COAX24T4**20 #20, 4 #8100100 #228580 #22, 4 #20, 1 #1659**50 #22, 5 #16, 4 #1234**24 #20, 10 #1844 #125W21 #122 #162 #5 COAX4040 #226060 #225W21 #122 #162 #5 COAXBKAF - Available Receptacle Shell Only (Front Release)Shell Cavity A or BShell Cavity C or FShell CavityCShell CavityCShell CavityA or BContact Arrangements - Shell Sizes 2 and 3BKAD/BKAE (Plug Rear face shown)Shell Cavity A,B,D,E2W22 #1 COAX4W44 Modified #1 COAX (Metallic Insert)10T10**10 #8 TRIAX/COAX (#8 Grounded to Shell)(Metallic Insert)24**24 #1271W170 #221 #1 COAX 71W1B 70 #221 #1 COAX60**60 #2049T2**47 #202 #8110**100 #225 #12 & 5 #20** Pending ARINC release.(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS150150 #22120T2 **118 #222 #8 TWINAX/COAX (#8 Grounded to Shell)121**110 #225 #166 #20Contact Arrangements - Shell Sizes 2 and 3BKAF - Available Receptacle Shell ONLY (Front Release)SHELL CAVITY A, B, D, E,BKAF - Available Receptacle Shell ONLY (Front Release)SHELL CAVITY C, F** Pending ARINC release.NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS.(For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory)ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTSENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS71W170 #22150150 #226T6**6 #813W24 #203 #164 #122 #5 COAX100100 #2271W1B 70 #2210T10**10 #8121F**110 #22 6 #205 #16Waveguide ConnectionsPolarization (Engaging End)WAVEGUIDE DETAIL SHOWN FULLY ENGAGEDFULLYCENTERPOSTRIGHTPOSTLEFTPOSTCENTERPOSTRIGHTPOSTLEFTPOST INSULATOR ANDWAVEGUIDE RETAININGPLATEPlugBKA*1PLUG RECEPTACLE PLUG RECEPTACLEBKA*2BKA*3ReceptaclePolarizing PositionsPOSTDark area represents postPositionPositionLeft PostCenter PostRight PostLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPlug ShellReceptacle ShellKEYKit P/N 320-1067-000Kit P/N 320-1067-0030102030405060708091011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374750102030405060708091011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374751234561234561234561234561234561234561234561234561234561234561234561234561231111111111111111111111111111111111112222222222222222222222222222222222223331111116666665 55555444444333333222222111111666666555555444444333333222222111456123456123456123456123456123456123 456123456123456123456123456123456123456444444555555666666111111222222333333444444555555666666111111222222333333444444444444444444444444444444444444444333333333333333333333333333333333333222432165432165432165432165432165432165432165432165432165432165432165432165432444555555666666111111222222333333444444555555666666111111222222333333444444222222222222222222222222222222222111111111111111111111111111111111111666666165432165432165432165432165432165432165432165432165432165432165432165432165333333333333333333333333333333333444444444444444444444444444444444444555555111666666555555444444333333222222111111666666555555444444333333222222111111123456123456123456123456123456123456123456123456123456123456123456555555555555555555555555555555666666666666666666666666666666666666666666555555444444333333222222111111666666555555444444333333222222555555666666111111222222333333444444555555666666111111222222333333666666666666666666666666666666555555555555555555555555555555555555432165432165432165432165432165432165432165432165432165432165432165151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150Contact and Termination Tooling DataBKA* (LIF) Crimp ContactsBKAF-ARINC 600 Size 22 Wrap Post Socket Contacts With .025(6.35) Square Wire-Wrappable Tails-Receptacle Only.BKA* Thermocouple ContactsBKAF Printed Circuit Solder Post Socket Contacts Size 22 with .025(6.35) Dia. Printed Circuit Tails-Receptacle Only.The new low insertion force, front-insertable, front-removable #22 socket contacts with .025(6.35) dia., PC tails are now availble for use in the BKAF non-environmental receptacle version only.These contacts can be sold separately or they can be supplied with a connector (see How to Order). Use part numbers shown in the table on the right when ordering separately.BKAD/F Solder Post, Power Pin Contacts (Captive)-Receptacle Only.Contacts are captivated between two unbonded insulator halves.BKAF Solder Post Pin Contact Front ReleaseFront Release Pin Contacts Size 20 and 16The new low insertion force, front-insertable, front-removable #22 socketcontacts with .025(6.35) square wire wrappable tails are now available for use in the BKAF non-enviornmental receptacle version only.These contacts can be sold separately or they can be supplied with a connector (see How to Order). Use part numbers shown in the table on the right when ordering separately.*Applies to BKAF 13W2 and 5W2 inserts only*Consult facotry for other available lengthsSize 5 Coax Contact (Rear insertable/removable)Size 12 Shielded Contact (Rear insertable/removable)Size 1 Modified Coaxial Contacts (4W4 Layout Only)Crimp Center Contact-Conforming to ARINC 600Part Number Style Solder Type Replacement Termination KitsCrimpType CoaxCoaxReplacement Termination KitsCable AccommodationPart Number Style Solder Type CrimpType Cable AccommodationRG316 DS RG142Various349-1051-002349-1044-000349-1042-000Straight Straight SMA Adapter320-1066-008320-1066-007N/A N/A RG214AA-5886RG393ECS 311201AA-5887AA-5888RG142Various349-1043-001349-1048-000349-1051-000349-1046-000349-1049-000349-1050-000349-1047-000349-1047-001Straight Straight Straight Straight Straight Straight Straight TNC Adapter320-1066-000320-1066-002320-1066-003320-1066-001320-1066-004320-1066-005320-1066-006320-1066-016320-1066-018320-1066-019320-1066-017320-1066-013320-1066-014320-1066-015----Plug ConnectorCustomer Use Drawings:All Coax contacts (except 349-1047-001) customer use drawing #349-0000-305Crimp termination kits: Customer use drawing #320-0000-305Solder termination kits: Customer use drawing #320-0000-304Receptacle ConnectorCustomer Use Drawings:Coax contacts 349-1051-002 and 349-1044-000 are located on cusomter use drawing #349-0000-304Coax contacts 349-1042-000 is located on cusomter use drawing #320-1042-000Sizes 1 Coax Contacts (71W1 layout only)Sizes 1 Coax Contacts (To be used with connectors containing 71W1A, 71W1B and 2W2 insert modifier-"M")Same standard coax contacts as used in ITT Cannon's DPX (ARINC 404) connector series.Designed to be interchangeable with contacts made by other manufacturers.Receptacle ConnectorPlug ConnectorSize 8 Coaxial ContactsSize 8 Twinax ContactsSize 8 Ground ContactsPlug ConnectorReceptacle ConnectorPlug ConnectorReceptacle ConnectorReceptacle ConnectorPlug ConnectorContact Type Socket Part Number *Engagement**TerminationShort Long Crimp RR-RR X -----349-1087-000-----349-1087-001349-1084-000349-1084-001349-1084-002349-1084-003349-1086-000349-1086-001349-1006-000349-1081-000----X X349-1007-000349-1080-000349-1080-001349-1080-002349-1080-003349-1082-000349-1082-001349-1088-000031-3300-000--X8, 10 AWG030-3306-000030-3306-001030-3676-000---X X8, 10 AWG 8, 10 AWG 8, 10 AWGX X -X-X -X -X ----X X X-X X X-X X XXXXXX X XX X XX X XX XX Crimp FR-RRSolder .250 (6.35)FR-FR .375 (9.52)RF Cable NumberContact Type Socket Part Number *Engagement**TerminationShort Long Crimp RR-RRCrimp FR-RRFR-FR .250 (6.35)Solder .375 (9.52)RF Cable NumberContact Type Socket Part Number *Engagement**TerminationShort Long Crimp RR-RR Crimp FR-RRSolder .250 (6.35)FR-FR .375 (9.52)RF Cable Number Contact Type Socket Part Number *Engagement**TerminationShortLong Crimp RR-RR Crimp FR-RRSolder .250 (6.35)FR-FR .375 (9.52)RF Cable Number Contact Type Socket Part Number * The electrical engagement of "Long" contacts is .150 (3.81) greater than the electrical engagement of "Short" contact.**RR-RR indicates rear release, rear removal. FR-RR indicates front release, rear removal. FR-FR indicates front release, front removal.*Engagement**TerminationShortLong Crimp RR-RRCrimp FR-RRSolder .250 (6.35)FR-FR .375 (9.52)Wire Size Contact Type Socket Part Number *Engagement**TerminationShortLong Crimp RR-RRCrimp FR-RRSolder .250 (6.35)FR-FR .375 (9.52)Wire Size Adams-Russell Co. Inc.FC11Z Adams-Russell Co. Inc.FC14ZAdams-Russell Co. Inc.FC11Z Adams-Russell Co. Inc.FC14ZM17/176-00002Tensolite Co.24463/9 B017X-2 (LD)Tensolite Co.24463/9 B017X-2 (LD)Tensolite Co.24463/9 B017X-2 (LD)Tensolite Co.24463/9 B017X-2 (LD)M17/176-00002Sealing Plugs-BKAE Environmental Connnectors OnlyFiller Plugs-BKAD Non-Environmental Connectors OnlyCavity ReducerDust CapsPart Number Contact Size Color A B C Part Number #5 Coax to #12 ContactCavity reducers are available when additional circuits are required for siz 12 power contacts. These reducers, having the internal configuration of size 12 power contact, are inserted into the size 5 coaxial insulator cavity to create size 12 power contact cavity.225-0094-000225-1013-000225-0070-000225-0071-000225-0072-000225-0090-000225-0095-000225-0096-000225-0097-000225-0098-000225-0099-000025-1121-001025-1122-001025-1123-001025-1124-001PinP/N 021-8756-000SocketP/N 021-8757-000Note: Supplied as standard for BKA product line only.BKAD 1-A & B-Plug BKAD 1-C-Plug BKAD 2&3-A & B-Plug BKAD 2&3-C-Plug025-1155-001025-1156-001025-1157-001025-1158-001BKAD 1-A&B-Receptacle BKAD 1-C-Receptacle BKAD 2&3-A & B-Receptacle BKAD 2&3-C-Receptacle22201612#5 Coax (Pin)22201612#5 and #9 Coax#5 and #9 Coax(Socket)Black Red Blue Yellow White Black Red Blue Yellow White.063 (1.6).085 (2.2).115 (2.9).171 (4.3).365 (9.3).040 (1.0).065 (1.6).075 (1.9).121 (3.1).287 (7.3).469 (11.9).469 (11.9).469 (11.9).564 (14.3).835 (21.2)White.069 (1.7).083 (2.1).131 (3.3).187 (4.7).275 (7.0).275 (7.0).051 (1.3).069 (1.7).108 (2.7).156 (4.0).251 (6.4).251 (6.4).420 (10.7).350 (8.9).320 (8.1).320 (8.1).450 (11.4)1.061 (26.9)Part Number Part Number Description Description Contact Size Color A B C P/N 225-0090-000Material: Teflon(All others thermoplastic)P/N 225-0099-000Material: Teflon(All others thermoplastic)BKAF P/N 225-1058-000(Size 22 - Black)(See Customer Use Drawing for details)Conductive dust caps protect against static electricity.AAAABBBBCCCCReplaceable InsertsPart NumberSocket AssemblyPin AssemblyClassBKAD BKAE BKAE BKAD BKAE BKAD BKAE BKAF BKAE BKAD BKAE BKAF BKAD BKAE BKAD BKAE BKAF BKAD BKAE BKAD BKAE BKAE BKAE BKAE BKAD BKAE BKAF BKAD BKAE BKAF BKAD BKAE BKAF BKAD BKAE BKAF BKAD BKAE BKAF BKAD BKAE BKAF BKAE BKAD BKAE BKAF BKAD BKAE BKAD BKAE BKAF 144-2944-000144-2944-000143-1156-001177-1000-002177-1000-002143-1912-000143-1912-001143-1141-000143-1154-001228-1026-002228-1026-001N/A228-1027-002228-1027-001143-1908-000143-1908-001143-1142-000143-1173-000143-1173-001143-1159-001143-1097-005143-1171-001143-1167-001143-3714-003143-1910-000143-1910-001N/A143-1958-000143-1958-002N/A143-2085-001143-2085-000N/A143-1113-000143-114-000N/A143-3877-000143-3879-000N/A143-2015-000143-2015-001N/A143-1182-000N/A143-1165-001N/A143-1150-002143-1150-001143-1906-000143-1906-001N/A144-2945-000144-2945-000143-1157-001177-1001-004177-1001-004143-1913-000143-1913-001N/A143-1155-001228-1012-003228-1012-001228-1015-001N/A228-1014-002143-1909-000143-1909-001N/A143-1174-000143-1174-001N/A143-1098-005143-1172-001143-1170-001143-3715-003143-1911-000143-1911-001143-2065-000143-1960-000143-1960-002143-2090-000143-2086-001143-2086-000143-2066-000143-1111-000143-1112-000143-1118-000143-3878-000143-3880-000143-1178-000143-2016-000143-2016-001143-2067-000143-1183-000143-1166-002143-1166-001143-1177-000143-1158-002143-1158-001143-1907-000143-1907-001143-2068-000Layout2W2**A4W4**5W266T610T1013W230T2344059*60-#20**60-#22**71W171W1A*71W1B85100110120T2121150Consult factory for Insert Part Numbers not listed.*Modified 71W1 insert to be used with connectors containing 71W1 insert modifier "M"**"Pin Inserts' accept receptacle coax contacts. "Socket Inserts" accept plug coax contacts.AR INC 600 R ack and Panel Connectors B K AD/E/FCross Reference-Part Number/Customer-Use DrawingCOMPONENT PART NUMBER CUSTOMER USE DRAWING NUMBERCOMPONENT PART NUMBER CUSTOMER USE DRAWING NUMBERCOMPONENT PART NUMBERCUSTOMER USE DRAWING NUMBER030-1975-009030-1975-010030-2259-000030-2273-000030-2280-000030-2286-000030-2356-000030-2357-000030-2358-000031-1113-009031-1113-010031-1287-000031-1302-000031-1303-000031-1308-000031-1351-000031-1351-001031-1351-002031-1351-003031-1352-000031-1252-000031-1252-002031-1352-003143-1908-000143-1908-001143-1909-000143-1909-001143-1910-000143-1910-001143-1911-000143-1911-001143-1912-000143-1912-001143-1913-000143-1913-001143-1958-000143-1958-002143-1960-000143-1960-002143-2015-000143-2015-001143-2016-000143-2016-001143-2065-000143-2066-000143-2067-000143-2068-000143-2085-000143-2085-001143-2086-000143-2086-001249-1521-002249-1522-009249-1522-010249-1554-002249-1604-003249-1604-004249-2201-000249-2202-000249-5027-013249-5027-015249-5027-016320-0051-000320-1066-000320-1066-001320-1066-002320-1066-003320-1066-004320-1066-005320-1066-006249-1521-002249-1522-010249-1522-010249-1554-002249-1604-003249-1604-004249-1521-002249-1522-010249-5027-013249-5027-007249-5027-0161250Y320-000-305025-1121-001025-1122-001025-1123-001025-1124-001025-1155-001025-1156-001025-1157-001025-1158-001025-0000-054(Conductive Only)025-0000-055(Conductive Only)225-0000-014225-0094-000225-0095-000225-0096-000225-0097-000225-0098-000225-0099-000225-1058-000225-0072-000225-0090-000225-1013-000225-1014-000225-1015-000225-0000-006225-0090-000225-0000-008143-0000-081143-0000-077143-0000-080143-0000-079143-0000-0781247Y 143-0000-079249-1521-000249-1522-000249-1522-002249-1554-000249-1604-000249-1604-001249-5027-008249-5027-017249-5027-000249-5027-007349-0000-306249-1521-000249-1522-000249-1522-002249-1554-000249-1604-000249-1604-001249-1604-002249-1882-000249-1882-002249-1885-002249-5027-008249-5027-017249-5123-000249-5123-001349-1053-000349-1053-001349-1053-002349-1053-003349-1053-0043491053-005349-1053-006349-1053-007349-1053-008349-1053-009030-1975-009030-1975-010030-2259-000030-2273-000030-2280-000030-2286-000030-2356-000030-2357-000030-2358-000031-1113-009031-1113-010031-1287-000031-1302-000031-1303-000031-1308-000031-0000-343031-0000-344021-0144-000021-0144-001021-0144-002021-0144-003021-0144-004021-0144-006021-0144-008021-0144-011021-0144-000021-0144-001021-0144-002021-0144-003021-0144-004021-0144-006021-0144-008021-0144-011349-0013-000349-0014-000349-0015-000349-0016-000349-1003-000349-1009-000349-0000-000349-0000-001349-0000-002349-0000-001349-000-301249-1767-000249-1767-001249-1768-000249-2203-000249-1767-000249-1767-001249-1768-000249-2203-000143-1906-000143-1906-001143-1907-001143-1907-001143-0000-079ContactsReplacement Coax Termination KitDust CapsFiller PlugsSealing PlugsReplacement Coax Body AssemblySize #1 Coax ContactsSize #5 Coax ContactsSize #12 Shielded ContactReplaceable InsertsFor part numbers not listed, consult ITT Cannon for applicalbe customer-use drawing.。
