TRF——灯具耐久性测试报告
- 格式：docx
- 大小：15.31 KB
- 文档页数：2
TRF——灯具耐久性测试报告
TRF——灯具耐久性测试报告
————————————————————————————————作者：————————————————————————————————日期：
2
Appliance (产品名称): Model No.(型号名): Rating (额定参数):
Date (日期):
ERP No. or new sample (物料编码或新测试样品): Quantity of
test samples (测试的样品数量):
Test mothod (测试标准):Clause 12.3 of IEC 60598-1:2008
Test purpose (测试目的): To check the endurance
performance of luminaire component (检查灯具部件的耐久特性).
Comparison photos (对比图片)
测试前的原板(Original sample before test) 测试后的样板(Sample after test)
Act.(行为)Test description (测试描述) Result (结果) Remark (备注) □48h of endurance test (48小时的老化测试) □Pass □Fail
□Electric strength test (电气强度测试) □Pass □Fail
Test load(测试负载): W Test voltage (测试电压): V
Test duration(测试持续时间): h ta (环境温度): ℃
Result (结论)：
□Pass (合格) □Fail (不合格)Conclusion (结论):
□测试后没有变色(Colour of sample didn’t change after test)
□测试后轻微变色(Colour of sample changed slightly after test)
□测试后严重变色(Colour of sample changed seriously after
test)
□测试后样品的配件发生变形(Components of sample
deformed after test) □测试后样品的配件发生开裂(Components of sample cracked
after test)
□测试后样品的配件发生烧焦(Components of sample scorched
after test)
□测试后样品的配件不能正常工作(Part of item became
unserviceable after test)
□测试后样品没有配件不能正常工作(No part of item became
unserviceable after test) □测试后样品没有烧焦,变形,开裂(Sample
didn’t scorch, deform or crack after test)
□测试后样品标签仍然清晰(The label of item was still legible
after test)
Remark (备注):
3 / 3
