下载文档原格式
SPEC19-08 10/15)Outlet: 1-1/4” tube outlet for 1-1/4” slip joint connectionACCESS PANELSHeavy-gauge steel with vandal-resistant screws. Provides access for easy hook-up of all plumbing connections. SUGGESTED SPECIFICATIONSUnit shall include powder-coated finish with vandal-resistant pushbutton actuation, vandal-resistant bubbler with integral hood guard, and contour-formed rounded basin to reduce splash and prevent standing water. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act.Outdoor TubularModel LK4410FRK is shown.2222 Camden Court Oak Brook, IL In keeping with our policy of continuing product improvement, Elkay reserves the right to change specification without notice. Please visit for the most current version.ModelColor OptionADA CompliantNSF/ANSI 61CertifiedLK4410FRK*(Refer to Finish Color Options)••* Select color option to complete model number. Example: LK4410FRK EVG Beige Black Blue Brown Evergreen GrayOrange Purple Terracotta Red White YellowN o w Av a i l a bl ei n12Co l o r s !Each 4410 FR consists of 2 cartons of the following:• Fountain• Single Freeze-Resistant Valve System - 97243CThis specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.FINISH COLOR OPTIONS – Choose color option to complete your model number, add as suffix example: LK4410FRK EVGMatte finish: Evergreen = EVG Gloss finish: Beige = BGE Gray = GRY Terracotta = TER Black = BLK Orange = ORN White = WHT Blue = BLU Purple = PUR Yellow = YLWBrown = BRN Red = REDOPTIONS• Hose Bib (Locking) - LK4471LHB * (Choose color option to complete your model number)• Hose Bib (Non-Locking) - LK4470NLHB* (Choose coloroption to complete your model number)• Direct Bury Kit - 97890CPrinted in the U.S.A.Page 2MODEL LK4410FRK Outdoor TubularFreeze-Resistant FountainOPERATING PRESSURES:Supply water 20 – 105 psi maximumMOUNTING INSTRUCTIONS and PLUMBING INSTRUCTIONSSite and drainage excavation is required for fountain installation. Refer to owner’s manual for site preparation details. Provide solid, well-drained surface to mount pedestal fountain (concrete pad recommended) with adequate support (300 lb. load minimum). (6) 3/8” minimum fasteners (not included) should be attached securely to mounting surface in order to secure fountain, (Refer to rough-in diagram), and be sure to allow an opening for the freeze-resistant valve in the ground as shown in the diagram below). Refer to local codes for any additional requirements.Locate and install plumbing through ground as required. Assemble fountain to prepared site and mounting pad.NOTE: Fountain is not furnished with service valve.Position pedestal over plumbing and secure base to fasteners. Remove access panels and connect supply and water lines. Turn on water supply and check for leaks. Refer to owner’s manual for detailed instructions.Reassemble access panels to pedestal. Trap and service stop not included.2222 Camden Court Oak Brook, IL 。
Eaton 3S550ASC 3S Eaton, 550 VA, 330 W, entrée 5-15P, Prises : (4) 5-15R,(4) 5-15R surtension uniquementSpécifications généralesASC 3S Eaton3S55074317203462513.2 in3.4 in 5.5 in7.3 lb FCC Partie 15 Classe A Sous-partie BSections 15.107b, 15.109bNOM Homologué cUL UL 1778UL 497A SÉRIE 3, Batteries remplaçables par l’utilisateur.Nom du produit Numéro du catalogue CUP Longueur du produit Hauteur du produit Largeur du produit Poids du produit Conformités Certifications Notes de catalogueGraphique sur la durée d'exécution Remplaçable par l’utilisateur 1Scellé, plomb-acide (4) 5-15R, (4) 5-15R surtension uniquement 0,6102 à 132 Vca 0,1 Hz Hors ligne/en veille5-15P57 à 70 Hz(1) port USB OuiJusqu'à 10 000 pi (3 000 m) sans déclassement < 50 dB à 1 mètre 0 ° à 40 °C (32 ° à 104 °F)De 20 à 93 % sans condensation1 ASC prête à fonctionner, Câble USB, Guide de l’utilisateur Noir 97 %OuiEaton 3S UPS Graphique sur la durée d'exécution Remplacement de batterie Quantité de batteries Type de batterie ReceptacleFacteur de puissance de sortie Plage de tension de sortie Fréq. de sortie TopologieConnexion d'entrée Plage de fréquences d'entrée Communication Interface Ethernet AltitudeNiveau de bruit Plage de température Humidité relativeContenu de l’emballageCouleur EfficacitéProtection contre les surtensions Plans de services étendus Audiovisuel BrochuresÉCHANGE DE DÉPÔT AVANCÉEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tous droits réservés. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia Eaton 3S UPS brochureEaton 3S technical specificationsEaton load protection guaranteeEaton extended warranty certificateEaton limited warrantyExtended warranty certificateEaton 3S UPS user guideCaractéristiquesGuides de garantieManuels et guides d’utilisationDÉPÔT POUR LARÉPARATION DE CINQ ANS : 3SW5Y-0750UC- Couv. sur les piècesexpédiées pendant cinq ans - Couv. des pièces, des appareils électroniques et des batteries de l’ASC- Expédition le prochain jour ouvrable- Soutien technique。
Diameter协议协议名称：Diameter协议一、引言Diameter协议是一种网络协议，用于在计算机网络中进行认证、授权和计费（AAA）服务。
该协议是对早期的RADIUS协议的改进和扩展，旨在提供更高的安全性和可扩展性。
本协议旨在准确描述Diameter协议的标准格式和相关规范，以确保在各种网络环境中实现一致性和互操作性。
二、术语和定义在本协议中，以下术语和定义适用于所有相关方：1. Diameter节点：指运行Diameter协议的网络设备或服务器。
2. Diameter客户端：指向Diameter服务器发送请求的设备或应用程序。
3. Diameter服务器：指接收和处理Diameter请求的设备或应用程序。
4. Diameter消息：指在Diameter协议中进行通信的信息单元，包括请求和响应。
5. Diameter会话：指一系列相关的Diameter消息，用于完成特定的AAA服务。
6. AVP（属性值对）：指Diameter消息中的键值对，用于携带各种协议相关的信息。
7. AAA服务：指认证、授权和计费服务，用于管理网络用户的访问和资源使用。
三、协议格式1. Diameter消息格式Diameter消息由消息头和消息体组成。
消息头包含长度、标志位、消息代码和应用标识等字段，用于识别和解析消息。
消息体包含一个或多个AVP，用于携带具体的协议信息。
2. AVP格式AVP由AVP头和AVP值组成。
AVP头包含AVP代码、标志位和长度等字段，用于标识和解析AVP。
AVP值用于携带具体的协议信息，可以是单个值或多个值的集合。
四、协议流程1. 连接建立Diameter客户端与Diameter服务器之间建立TCP或SCTP连接，并进行协议版本协商和安全性认证。
2. 请求和响应Diameter客户端向Diameter服务器发送请求消息，请求特定的AAA服务。
请求消息中包含一个或多个AVP，用于传递相关的用户和服务信息。
三坐标测量机技术协议甲方：xxxxxxxxxxx有限公司合同编号：FBGTHZ-SB20140512乙方：xxxxxxxxxxx有限公司（代理方）乙方授权方：xxxxxxxxxxx有限公司有限公司甲方就购买乙方的AtlasB256018龙门式坐标测量机经多次技术交流后达成共识，签订本技术协议，双方共同遵照执行。
一、配置清单二、技术描述三、安装调试四、验收五、培训六、服务一、配置清单二、技术描述（一）主机描述采用国际先进的有限元分析设计方法，使其具有机械结构刚性强、偏差小，具有高精度、高性能和高稳定性的优点。
●机械主体结构采用双边固定立柱、双边高架导轨、横梁移动式结构，结构简单、开敞的结构、移动重量轻，运动性能好。
●工作台采用地基平面，具有承载能力强、装卸空间宽阔、便捷。
●Y向导轨以天然花岗岩作基础，采用上燕尾式，定位精度高，动态几何误差小、稳定性能好。
●Y向采用国际最先进的海德汉光栅尺、双光栅、双驱动技术，可实现双全闭环、双反馈回路，极大地提高了Y向导轨的定位精度及运行速度。
●宽温度特性设计，使其具备良好温度适应性、抗实效变形能力，适应车间环境下的安全操作。
●三轴均采用自洁式预载荷高精度空气轴承组成的静压气浮式导轨，轴承跨距大，抗角摆能力强，阻力小、无磨损、运动更平稳。
●驱动系统采用齿轮齿条传动装置，确保传动更快捷、更精准。
●Z轴采用平衡装置，提高了Z轴的定位精度及稳定性。
●22项机械几何误差补偿技术的运用，极大地提高了机器精度。
●控制系统采用国际知名品牌的高性能三坐标专用控制系统，可靠性好。
●软件采用具有独立知识产权的、功能强大的AC-DMIS测量软件包，其完善的测量功能和联机功能，为用户提供了完美的测量解决方案。
●光栅尺的安装方式为：：在导轨上安装一钢质基座，光栅尺安装于基座内，一端固定一端自由，可避免光栅尺与导轨材料不同引起的膨胀不同，以及保证光栅的自由伸缩，保证长期的精度稳定性和光栅尺寿命。
爱德华三坐标测量机技术协议1、设备名称：三坐标测量机2、规格型号：Daisy6863、配置清单：4.2、性能指标：01、测头系统：RENISHAW MH20i手动双旋转可分度测头系统技术参数：TP20测力模块一个测头座分度机构：绕 A轴（水平轴）范围 0°～90°最小步距15°绕B轴（铅垂轴）范围±180°最小步距15°02、测针组：测针（mm）：订货号型号材料测球直径长度杆直径有效长度数量（根）验收结果A-5003-0033 PS48R 红宝石测球/碳化钨杆 1 20 0.8 12.5 1A-5000-3603 PS2R 红宝石测球/不锈钢杆 2 20 1.4 14 1A-5000-4160 PS16R 红宝石测球/不锈钢杆 3 20 1.5 17.5 1A-5000-4161 PS17R 红宝石测球/不锈钢杆 4 20 1.5 20 1A-5000-7807 PS8R 红宝石测球/不锈钢杆 2 10 1 6 4A-5000-3604 PS1R 红宝石测球/不锈钢杆 3 10 1.5 7.5 1订货号型号材料直径长度数量（根）M-5000-7634 SE7 不锈钢杆 3 5 1M-5000-3647 SE4 不锈钢杆 3 10 1M-5000-3648 SE5 不锈钢杆 3 20 1M-5000-4162 SE6 不锈钢杆 3 30 1订货号型号材料中心尺寸有效长度数量（个）A-5000-3627 SC2 不锈钢杆7 7.5 1 03：校准器：标准球Φ25及万向球座T504：精度指标:长度计量系统：英国进口精密光栅尺分辨率： 0.5m；测量范围X×Y×Z: 600mm×800mm×600mm示值误差： MPEE≤2.4＋L/300m探测误差： MPEP≤2.4m4.3、环境要求（详情见附件《三坐标测量机安装使用环境技术要求自检表》）01、温度：20±2℃ 1℃/h 1℃/m 2℃/24h02、湿度：40%-70%03、电源：220V±10%, 50HZ-60HZ04、气源：≥0.55MPa4.4、控制系统： DCC 控制器是德国MORA Metrology GmbH公司高性价比的运动控制器，能够广泛适用于各种工况的高性能、高可靠性的运动控制解决方案。
Series Series O W N E R’S M A N U A LSeriescontentsINTRODUCTION02 PRoDUct DIMensIons 06-07 sAFetY InstRUctIons 02 tecHnIcAL sPecIFIcAtIons 08-09 PRoDUct IDentIFIcAtIon 03 WARRAntY stAteMent 10 stAnDARD AccessoRIes 04 DecLARAtIon oF conFoRMItY 11 InstALLAtIon GUIDeLInes 05IntRoDUctIonDesigned for a wide variety of sound reinforcement applications the Tannoy DVS is an ultra compact loudspeaker system capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail. A truly universal solution, the DVS offers outstanding durability and resistance to scuffs and knocks. Able to deliver consistent performance under a wide range of adverse conditions the DVS is suited to applications indoors or out. Available in black or white the DVS will effectively blend into most backgrounds. Utilisation of the point source loudspeaker allows the DVS to be mounted on a wall or ceiling in either horizontal or vertical orientations without affecting its performance. A range of hardware options ensures simple and effective installation. Also available with built-in line transformer. For applications requiring extended low frequency enhancement, a range of Tannoy sub-bass systems are available and can be used in conjunction with the DVS.sAFetY InstRUctIons1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. The user is responsible for fixing the hardware to the surface to ensure safe operation. The fixings must support the weight of the product – please consult the manual’s specification page for the appropriate weights. Please consult the relevant construction codes in your region for further information on suitable hardware fixing methods.6. Tannoy will not be held accountable for any damage caused by incorrect installation.SeriesPRoDUct IDentIFIcAtIonInPUt connectoRFit rubber grommet to ensure therear of the product is kept sealedstAnDARD AccessoRIesDInKLe seALYoKe BRAcKet(SUPPLIED WITHFIXINGS)SeriesInstALLAtIon GUIDLInes1. Fix the yoke bracket to the surface using asuitable fixing method.2. Feed the speakercable through the rubber grommet then connect the euro-type plug to the wires, observing the correct polarity.3. For connection to the loudspeaker, use pins 1 (+) and 2 (-).Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers ina distributed line.4. Offer the speaker up to the bracket andattach using the thumb screws provided.5. Connect the euro plug then replace the rubber grommet to ensure the speaker is sealed.6. The DVS 4t models are fitted with 30W transformers.THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE.NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOWIMPEDANCE.7. The DVS 6t and DVS 8t models are fitted with 60W transformers.THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100VOLT AMPLIFIER WHILE ITIS SET FOR LOW IMPEDANCE.tecHnIcAL sPecIFIcAtIonsDVs 4 DVs 6 DVs 8 PeRFoRMAnceFrequency Response (-3dB) (1)75Hz - 20kHz 80Hz - 20kHz 75Hz - 20kHzFrequency Range (-10dB) (1)60Hz - 30kHz 65Hz - 30kHz 60Hz - 30kHzSystem Sensitivity (1W @1m) (2) 84dB 88dB 90dBDispersion (-6dB) 110 degrees conical 90 degrees conical 80 degrees conical Transducers Coaxial Coaxial CoaxialLow Frequency 100mm (4.00”) mineral 165mm (6.5”) mineral 200mm (8.00”) mineralloaded cone material loaded cone material loaded cone materialHigh Frequency 20mm (0.79) 20mm (0.79) 20mm (0.79)Crossover 3.9kHz - 2nd order LF, 4.3kHz - 2nd order LF, 3.4kHz - 2nd order LF,2nd order HF 2nd order HF 2nd order HFDirectivity (Q) 6.5 averaged 1kHz to 10kHz 10.6 averaged 1kHz to 10kHz 12.3 averaged 1kHz to 10kHz Directivity (DI) 5.3 averaged 1kHz to 10kHz 9.6 averaged 1kHz to 10kHz 10.0 averaged 1kHz to 10kHzRated Maximum SPL (2)100dB (average) 105dB (average) 108dB (average)106dB (peak) 111dB (peak) 114dB (peak)Power HandlingAverage 40W 60W 70WProgramme 80W 120W 140WPeak 160W 240W 280WRecommended Amplifier Power 80W @ 6 Ohms 120W @ 6 Ohms 140W @ 6 OhmsNominal Impedance 6 Ohms 6 Ohms 6 OhmsDistortion 10% Full Power(4.9V) 2nd Harmonic 3rd Harmonic (6.0V) 2nd Harmonic 3rd Harmonic (6.48V) 2nd Harmonic 3rd Harmonic 250Hz 0.738% 0.772% 0.934% 0.316% 1.86% 0.12%1kHz 0.145% 0.234% 0.292% 0.560% 1.17% 0.54%10kHz 0.070% 0.070% 0.740% 0.050% 1.10% 0.04% Distortion 10% Full Power(5.5V) 2nd Harmonic 3rd Harmonic (1.9V) 2nd Harmonic 3rd Harmonic (2.05V) 2nd Harmonic 3rd Harmonic 250Hz 0.320% 0.311% 0.225% 0.326% 1.86% 0.12%1kHz 0.078% 0.174% 0.082% 0.363% 1.17% 0.54%10kHz 0.087% 0.087% 0.147% 0.066% 1.10% 0.04% constRUctIonenclosure ABS ABS ABSGrille Steel, plated and painted Steel, plated and painted Steel, plated and paintedconnectors Euroblock type removable Euroblock type removable Euroblock type removablelocking connector with locking connector with locking connector withscrew terminals with screw terminals with screw terminals with“loop through” facility “loop through” facility “loop through” facility supplied Accessories Yoke Bracket Yoke Bracket Yoke Bracket Dimensions 277.0 x 170.4 x 165.6mm 340.5 x 212.2 x 216.5mm 451.8 x 290.0 x 296.0mm (H x W x D) (10.91” x 6.71” x 6.52”) (13.41” x 8.36” x 8.52”) (17.79” x 11.42” x 11.65”)net Weight 1.8kg (3.96lbs) 3.1kg (6.83lbs) 5.3kg (11.67lbs)Shipped Weight 5.4kg (11.9lbs) 8.6kg (11.9lbs) 14.6kg (32.16lbs)Packed quantity 2 2 2SeriestecHnIcAL sPecIFIcAtIonsDVs 4tDVs 6tDVs 8ttRAnsFoRMeR VeRsIonstransformer setting Rotary switch Rotary switch Rotary switchTransformer Taps 70V30W / 115W / 7.5W / 3.75W / 60W / 30W / 15W / 7.5W 60W / 30W / 15W / 7.5W & low Impedance operation & low Impedance operation & low Impedance operation100V 30W / 7.5W / 15W & 60W / 30W / 15W &60W / 30W / 15W &low Impedance operation low Impedance operation low Impedance operation net Weight 2.3kg (5.07lbs) 4.1kg (9.03lbs) 6.3kg (13.88lbs)Shipped Weight6.2kg (13.66lbs) 10.6kg (23.35lbs) 16.6kg (36.56lbs)Packed quantity222Notes(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamberA full range of measurements, performance data, and Ease™ Data can be downloaded from Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal orexceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.WARRAntYno maintenance of the DVs loudspeaker is necessary.All of our products have been produced and tested with care and precision to give first-class service.All passive components are guaranteed for a period of five years from the date of purchase from an authorised Tannoy dealer subject to the absence or evidence of misuse, overload, or accidental damage.If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage.If you suspect a problem with a Tannoy product then, in the first instance, discuss it with your Tannoy dealer. If you require further assistance then we ask that you deal directly with your local Tannoy distributor. If you cannot locate your distributor please contact Customer Services, Tannoy Ltd at the address given below.Customer Services, Tannoy Ltd., Rosehall Industrial Estate, Coatbridge, Strathclyde ML5 4TF, ScotlandTelephone: 01236 420199 (National)+44 1236 420199 (International)Fax: 01236 428230 (National)+44 1236 428230 (International)E-mail: **************************************Service Info, TC Group AmericasTelephone: (800) 565-2523 (toll free)(519) 745-1158Fax: (519) 745-2364E-mail: ************************Web: Do not sHIP AnY PRoDUct to tAnnoY WItHoUt PReVIoUs AUtHoRIsAtIonPLeAse note: In order to direct you to the appropriate service facility a return authorization and instructions must be issued in advance- do not send any equipment to any Tannoy or TC Group Americas facility without prior authorization or it will be refused. In some cases a local service facility can be recommended.Our policy commits us to incorporating improvements to our products through continuous researchand development. Please confirm current specifications for critical applications with your supplier.DVS OWNER MANUAL_011Series DecLARAtIon oF conFoRMItY The following apparatus is manufactured in China for Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate as intended, and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation as specified and intended.Details of the Apparatus:Tannoy Contractor Loudspeaker Model number: DVS Associated technical File:EMCi6Applicable standards: EN 50081-1 Emission EN 50082-1 Immunity signed:Position: Director of Engineering Date:19th Jan. 11012_ DVS OWNER MANUAL Tannoy adopts a policy of continuous improvement and product specification is subject to change.6481 0584 / 1111Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E:********************TCGI (ROW sales) T: 00 45 8742 7000 E:******************************TCGA (Americas sales) T: 00 1 (519) 745 1158 E:*************************Tannoy Middle East T: 00 971 (04) 4401208 E:********************。
Diameter协议协议名称：Diameter协议一、介绍Diameter协议是一种用于网络认证、授权和计费（AAA）的应用层协议。
它是RADIUS（远程身份验证拨号用户服务）协议的继任者，被广泛应用于3G、4G、5G移动网络和互联网服务提供商（ISP）等领域。
本协议旨在提供一种可靠、安全和可扩展的AAA解决方案。
二、协议结构Diameter协议采用客户端-服务器模型，其中客户端发起请求，服务器对请求进行处理并返回响应。
协议基于TCP或SCTP（流控制传输协议）进行传输，使用基于XML的语法进行消息编码。
1. 消息格式Diameter协议定义了多种类型的消息，包括请求消息、答复消息和错误消息。
每个消息由消息头和消息体组成。
消息头包含以下字段：- Version：指定协议的版本号。
- Length：指定整个消息的长度。
- Flags：包含一些标志位，如请求标志位、答复标志位等。
- Command Code：指定消息的类型，如认证请求、授权答复等。
- Application ID：指定应用程序标识符。
- Hop-by-Hop Identifier：用于跟踪消息的唯一标识符。
- End-to-End Identifier：用于跟踪请求和响应的唯一标识符。
消息体包含特定类型消息的参数和属性。
每个参数由以下字段组成：- AVP Code：指定属性的类型。
- Vendor ID：指定属性所属的供应商。
- Data Type：指定属性的数据类型。
- Length：指定属性值的长度。
- Value：包含属性的值。
2. 安全性Diameter协议提供了多种安全机制，确保消息的机密性、完整性和可靠性。
其中包括：- 消息加密：使用TLS（传输层安全）协议对消息进行加密，防止信息泄露。
- 消息完整性：使用消息摘要算法对消息进行签名，确保消息在传输过程中不被篡改。
- 认证和授权：使用数字证书对通信双方进行身份验证，并授权访问特定资源。
ASAHI/AMERICA•***********************•Tel:800-343-3618•781-321-5409•Fax:800-426-7058Rev 2211DSpecificationsMotor Type: Reversing, brushless DC Sizes: S20 for 1/2” – 2” ball valves S50 for 2-1/2” – 3” ball valves S110 for 4” ball valves Torque: 177 in-lbs to 973 in-lbsVoltage: 95 VAC to 265 VAC multi-voltage Amp Draw: 0.18 Amp for S20 0.24 Amp for S50 0.84 Amp for S110Max Ambient Temp:150° F• Compact: Perfect for OEM and skidmanufacturers•• OLED Screen: Displays input command, positionstatus, alert conditions• Push Buttons: Used to calibrate/adjust end positions,local controls • Multi-voltage: 95 VAC to 265 VAC or 24 VAC/VDC • Motor: Reversing, brushless DC motor• Gear Train: Permanently lubricated steel gears• Corrosion Resistant Enclosure: NEMA 4X PC/PETenclosure with stainless steel trim • ISO mounting configuration• Electrical Connection: NEMA 4X cable gland with two-meter cable• Position Indication: Highly visible beacon positionindicator• LED Alarm Indication: RED closed, GREEN open, BLUEfault• Manual Override: Manually cycle valve via electrolessnickel-plated hex key• Selectable Control Signal: User can select 4-20 mA,0-20 mA, 0-10 VDC, 2-10 VDC, or 1-5 VDC (size 20 is specifically a current control signal or a voltage control signal)• Reverse Acting: User can select standard operationor reverse acting• Selectable Fail Position: If control signal is lost, theunit can be calibrated to fail as is, fail open, or fail close • Transmitter: Current or voltage transmitter (matchingthe control signal) is standard equipment• Alarm Contacts: Dry Contact rated 0.1 Amp @ 250VAC, 0.5 Amp @ 30 VDC for alarm status (over torque, as an example)• Space Heater: Internally wired to limit condensation • CE Compliant: All actuators are CE labeled andcompliant• 75% Duty Cycle: Extended duty cycle is ideal for highcycling/modulating applications• Output Torque: Series 19 electric actuators have anoutput torque range from 177 in-lbs to 973 in-lbs• QR Code: Links to user manual; includes wiringschematic• Simple Wiring: Wiring technique is the same for allvoltage units• Local Controls: Used with OLED and push buttons, auser can locally open or close units via passwordStandard Features (1/2” – 4”)Dimensions (inch)Weight (lbs)Amp draw is considered locked rotor *Cycle times are approximateDuty cycle shown for ambient temp (73° F)Engineering DataASAHI/AMERICA•***********************•Tel:800-343-3618•781-321-5409•Fax:800-426-7058Rev 2211DAll Series 19 SAV smart modulating electric actuators shall have a brushless DC motor that accepts multiple voltages, permanently lubricated steel gears, NEMA 4X PC/PET enclosure with stainless steel trim, visual beacon indication, ISO 5211 valve mounting platform, manual override, and be CE compliant. Standard features shall include a heater, transmitter, field selection of various control signals, field selection of fail position (upon loss of command signal), one set of dry contacts for alarm reporting, LED indicator for alarm conditions, an OLED screen with push buttons, local controls, and a QR code that links to its user manual and wiring schematic.Sample SpecificationWiring Diagrams。
User ManualRTKA223011DR0040BUDemonstration BoardThe RTKA223011DR0040BU demonstration board is a high voltage buck converter that demonstrates a low-cost high performance non-isolated AC/DC conversion from a universal input of 85V AC ~ 265V AC to a 24V output with output current up to 200mA.The board has built-in overcurrent, short-circuit, input brownout, and over-temperature protections.RTKA223011DR0040BU comes with a RAA223011 in TSOT23-5 package.Key Features▪Universal input▪Standby power less than 13mW▪No audible noise▪Low cost external componentsSpecificationsThis board is optimized for the following operating conditions:▪Input voltage: 85V AC ~ 265V AC▪Output voltage: 24V DC▪Output current: 200mA max (at 230V AC or higher)▪Efficiency: >74% at 100% load; 82% at 50% load▪No-load power: 11.3mW at 120V AC; 12.4mW at 230V AC▪Load regulation: -2.3%, load range 10% to 100%▪Operating temperature: -45°C ~ 70°C▪Board dimension: 29mm x 52mmOrdering InformationPart Number DescriptionRTKA223011DR0040BU RAA223011 TSOT23-5 demonstration boardRelated LiteratureFor a full list of related documents, visit our website:▪RAA223011 device page1.Circuit DescriptionThe RTKA223011DR0040BU is a buck regulator implemented with a high-side float-switching topology, withswitching frequency up to 30kHz. Its input has D1, D5, D6, and D7 operating as a full-bridge rectifier. FR is a 1W fusible resistor providing input overcurrent protection and inrush current limiting.C1, L1, and C2 consists of the input filter that provides the energy buffer after rectification and reduces conducted EMI noises to the input. L2, D2, and C OUT are the buck converter components. RFB1, RFB2, CFB2, and CFB1 provide the output feedback signal to the IC. D4 and R2 provide V CC biasing current after startup, to increase the efficiency. They can be optional for low-cost, low-power applications. C VCC is the IC supply capacitor.1.1Recommended Equipment▪AC power supply capable of generating AC voltage from 85V AC to 265V AC at 60Hz/50Hz, with at least 100mA output current capability. ▪Load resistor box with adjustable value of 120Ω and up, or an electronics load that can emulate a resistor load or current load up to 200mA. ▪Multi-meters to measure the output voltage and current. ▪Power meter to measure the AC input power.1.2Quick Start Guide1.Program the AC power supply with a voltage between 85V AC and 265VAC at the corresponding frequency of60Hz or 50Hz. 2.While the AC power supply is off, connect the output cables of the AC power supply to the L and N terminal ofthe RTKA223011DR0040BU. An optional power meter can be added in between AC power supply output and the input of the board.3.Connect the load to the output terminals VOUT and GND.4.Connect a voltage meter to VOUT and GND and connect a current meter between board outputs and the load.5.Turn on AC power supply.Figure 1.RTKA223011DR0040BU Connection Diagram2.Board Design2.1PCB Layout GuidelinesFor detailed PCB guidelines, see the RAA223011 datasheet.2.2RTKA223011DR0040BU Evaluation BoardFigure2.RTKA223011DR0040BU Evaluation Board (Top)Figure3.RTKA223011DR0040BU Evaluation Board (Bottom)RTKA223011DR0040BU User ManualRTKA223011DR0040BU Circuit SchematicFigure 4.RTKA223011DR0040BU SchematicJ1U2J4J32.4Bill of MaterialsQty Ref Des Description Manufacturer Part NumberGeneric Diode, 1kV, 1A, DO41Various1N4007 5D1, D3,D5-D71COUT CAP ALUM 330µF 20% 35V RADIAL Rubycon35ZLH330MEFCT810X12.5 1FR Miniature Metal Film Resistor, 10Ω, 1W, Wirewound Yageo FKN1WSJR-52-10R 2C1, C2CAP ALUM 4.7µF 20% 400V RADIAL Kemet ESG475M400AH2AA 0CVCC Do Not Populate1CVCCA Multilayer Cap, 1µF, 50V, 10%, 0603Murata Generic1CFB2Multilayer Cap, 820PF, 50V, 10%, 0603Generic Various2C3, CFB1Multilayer Cap, 0.1µF, 50V, 10%, 0603Generic Various1C4Multilayer Cap, 0.47µF, 50V, 10%, 0603Generic Various1RFB2Thick Film Chip Resistor, 102k, 1/16W, 1%, 0603Generic Various1R1Thick Film Chip Resistor, 137k, 1/16W, 1%, 0603Generic Various1RFB1Thick Film Chip Resistor, 887k, 1/10W, 1%, 0603Generic Various1D41A 600V Fast Rectifier Diode, DO214Fairchild ES1J1D2Ultrafast Power Rectifier, 600V, 2A, SMB OnMURS160T3Semicondutor1U2700V, Off-line Regulator, TSOT23-5Renesas RAA2230114GNP#JA0 0U1Do Not Populate1R2Thick Film Chip Resistor, 120k, 1/16W, 1%, 0603Generic VariousBourns RLB0608-102KL 1L1RLB Series Radial Lead Inductor, 1mH, 10%,100MA, Type21L2Power Inductor, 1.5mH, 10%, 0.45A, SMD Bourns SDR1006-152KL2.5Board LayoutTo download our design files, visit our website.Figure5.Top Layer[1]Figure6.Bottom Layer1.RTKA223011DR0040BU and RTKA223011DR0030BU share the same PCB3.Typical Performance CurvesV in = 85V AC ~ 265V AC, V OUT = 24V, I OUT = 200mA (maximum), T A = +25°CLoad Current (mA)4.Revision HistoryRevision Date Description1.0Feb 11, 2021Initial releaseCorporate HeadquartersTOYOSU FORESIA, 3-2-24 Toyosu,Koto-ku, Tokyo 135-0061, Japan Contact InformationFor further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit:/contact/TrademarksRenesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.IMPORTANT NOTICE AND DISCLAIMERRENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDINGREFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products.(Rev.1.0 Mar 2020)。
