H3C S3600 系列以太网交换机 命令手册-端口隔离

目录1 系统基本配置命令1.1 系统基本配置命令1.1.1 clock datetime1.1.2 clock summer-time one-off1.1.3 clock summer-time repeating1.1.4 clock timezone1.1.5 command-privilege level1.1.6 copyright-info enable1.1.7 display clipboard1.1.8 display clock1.1.9 display current-configuration 1.1.10 display diagnostic-information 1.1.11 display history-command1.1.12 display hotkey1.1.13 display this1.1.14 display version1.1.15 header1.1.16 hotkey1.1.17 quit1.1.18 return1.1.19 screen-length disable1.1.20 super1.1.21 super password1.1.22 sysname1.1.23 system-view2 设备管理命令2.1 设备管理命令2.1.1 boot-loader2.1.2 bootrom2.1.3 bootrom-update security-check enable 2.1.4 display boot-loader2.1.5 display cpu-usage2.1.6 display cpu-usage history2.1.7 display device2.1.8 display device manuinfo2.1.9 display fan2.1.10 display memory2.1.11 display power2.1.12 display reboot-type2.1.13 display schedule job2.1.14 display schedule reboot2.1.15 display system-failure2.1.16 reboot2.1.17 reboot onu2.1.18 reset unused porttag2.1.19 schedule job2.1.20 schedule reboot at2.1.21 schedule reboot delay 2.1.22 shutdown-interval2.1.23 system-failure2.1.24 update onu2.1.25 update onu onu-type3 系统维护与调试命令3.1 系统维护命令3.1.1 ping3.1.2 tracert3.2 系统调试命令3.2.1 debugging3.2.2 display debugging4 热补丁配置命令4.1 热补丁配置命令4.1.1 display patch information 4.1.2 patch active4.1.3 patch deactive4.1.4 patch delete4.1.5 patch install4.1.6 patch load4.1.7 patch location4.1.8 patch run1 系统基本配置命令1.1 系统基本配置命令1.1.1 clock datetime【命令】clock datetime time date【视图】用户视图【缺省级别】3：管理级【参数】time：当前时间，格式为HH:MM:SS（小时:分钟:秒），HH取值范围为0～23，MM和SS取值范围为0～59，除表示零点外，格式中的其他0可以省略不写。

H3CS3600系列以太网交换机命令手册-访问管理目录第1章访问管理配置命令.......................................................................................................1-1 1.1 访问管理配置命令..............................................................................................................1-1 1.1.1 am enable. (1)-11.1.2 am ip-pool................................................................................................................1-11.1.3 am trap enable........................................................................................................1-21.1.4 display am...............................................................................................................1-31.1.5 display isolate port..................................................................................................1-41.1.6 port isolate (1)-4第1章访问管理配置命令1.1 访问管理配置命令1.1.1 am enable【命令】am enableundo am enable【视图】系统视图【参数】无【描述】am enable命令用来开启访问管理功能。

H3C S3600系列以太网PON OLT交换机安装手册杭州华三通信技术有限公司资料版本：6W100-20090513声明Copyright © 2008-2009 杭州华三通信技术有限公司及其许可者版权所有，保留一切权利。

未经本公司书面许可，任何单位和个人不得擅自摘抄、复制本书内容的部分或全部，并不得以任何形式传播。

H3C、、Aolynk、、H3Care、、TOP G、、IRF、NetPilot、Neocean、NeoVTL、SecPro、SecPoint、SecEngine、SecPath、Comware、Secware、Storware、NQA、VVG、V2G、V n G、PSPT、XGbus、N-Bus、TiGem、InnoVision、HUASAN、华三均为杭州华三通信技术有限公司的商标。

对于本手册中出现的其它公司的商标、产品标识及商品名称，由各自权利人拥有。

由于产品版本升级或其他原因，本手册内容有可能变更。

H3C保留在没有任何通知或者提示的情况下对本手册的内容进行修改的权利。

本手册仅作为使用指导，H3C尽全力在本手册中提供准确的信息，但是H3C并不确保手册内容完全没有错误，本手册中的所有陈述、信息和建议也不构成任何明示或暗示的担保。

技术支持用户支持邮箱：customer_service@技术支持热线电话：800-810-0504（固话拨打）400-810-0504（手机、固话均可拨打）网址：相关资料及其获取方式相关资料手册名称用途《H3C S3600系列以太网PON OLT交换机快速入门》介绍了H3C S3600系列以太网PON OLT交换机的产品外观、安装过程、以及交换机的防雷等内容。

《H3C S3600系列以太网PON OLT交换机操作手册》介绍了EPON系统配置、用户界面、VLAN、以太网端口、MAC地址表管理、组播协议、ACL、QoS、SNMP-RMON、NTP、系统维护与调试等模块的配置。

SNMP-RMON 目录目录第1章 SNMP配置命令...........................................................................................................1-11.1 SNMP配置命令..................................................................................................................1-11.1.1 display snmp-agent.................................................................................................1-11.1.2 display snmp-agent community...............................................................................1-11.1.3 display snmp-agent group.......................................................................................1-21.1.4 display snmp-agent mib-view..................................................................................1-31.1.5 display snmp-agent statistics..................................................................................1-51.1.6 display snmp-agent sys-info....................................................................................1-61.1.7 display snmp-agent trap-list....................................................................................1-61.1.8 display snmp-agent usm-user.................................................................................1-71.1.9 enable snmp trap updown.......................................................................................1-81.1.10 snmp-agent...........................................................................................................1-91.1.11 snmp-agent community.......................................................................................1-101.1.12 snmp-agent group...............................................................................................1-111.1.13 snmp-agent local-engineid..................................................................................1-121.1.14 snmp-agent log...................................................................................................1-131.1.15 snmp-agent mib-view..........................................................................................1-131.1.16 snmp-agent packet max-size..............................................................................1-141.1.17 snmp-agent sys-info............................................................................................1-151.1.18 snmp-agent target-host.......................................................................................1-161.1.19 snmp-agent trap enable......................................................................................1-171.1.20 snmp-agent trap life............................................................................................1-181.1.21 snmp-agent trap queue-size...............................................................................1-191.1.22 snmp-agent trap source......................................................................................1-201.1.23 snmp-agent usm-user.........................................................................................1-20第2章 RMON配置命令...........................................................................................................2-12.1 RMON配置命令..................................................................................................................2-12.1.1 display rmon alarm..................................................................................................2-12.1.2 display rmon event..................................................................................................2-22.1.3 display rmon eventlog.............................................................................................2-32.1.4 display rmon history................................................................................................2-42.1.5 display rmon prialarm..............................................................................................2-52.1.6 display rmon statistics.............................................................................................2-72.1.7 rmon alarm..............................................................................................................2-82.1.8 rmon event............................................................................................................2-102.1.9 rmon history...........................................................................................................2-112.1.10 rmon prialarm......................................................................................................2-122.1.11 rmon statistics.....................................................................................................2-14第1章 SNMP配置命令1.1 SNMP配置命令1.1.1 display snmp-agent【命令】display snmp-agent { local-engineid | remote-engineid }【视图】任意视图【参数】local-engineid：本地SNMP实体引擎ID。

目录第1章IP地址配置命令...........................................................................................................1-1 1.1 IP地址配置命令..................................................................................................................1-1 1.1.1 display ip interface..................................................................................................1-11.1.2 ip address................................................................................................................1-3第2章IP性能配置命令...........................................................................................................2-1 2.1 IP性能配置命令..................................................................................................................2-1 2.1.1 display fib................................................................................................................2-12.1.2 display fib ip-address..............................................................................................2-22.1.3 display fib acl...........................................................................................................2-32.1.4 display fib |..............................................................................................................2-42.1.5 display fib ip-prefix..................................................................................................2-52.1.6 display fib statistics.................................................................................................2-62.1.7 display icmp statistics..............................................................................................2-62.1.8 display ip socket......................................................................................................2-82.1.9 display ip statistics..................................................................................................2-92.1.10 display tcp statistics............................................................................................2-112.1.11 display tcp status.................................................................................................2-132.1.12 display udp statistics...........................................................................................2-142.1.13 ip forward-broadcast...........................................................................................2-152.1.14 reset ip statistics..................................................................................................2-162.1.15 reset tcp statistics................................................................................................2-162.1.16 reset udp statistics..............................................................................................2-172.1.17 tcp timer fin-timeout.............................................................................................2-172.1.18 tcp timer syn-timeout...........................................................................................2-182.1.19 tcp window...........................................................................................................2-18第1章IP地址配置命令1.1 IP地址配置命令1.1.1 display ip interface【命令】display ip interface [ brief [ interface-type [ interface-number ] ] | [ interface-type interface-number ] ]【视图】任意视图【参数】interface-type interface-number：interface-type为接口类型，interface-number为接口编号。

目录第1章端口基本配置命令.......................................................................................................1-1 1.1 端口基本配置命令..............................................................................................................1-1 1.1.1 broadcast-suppression............................................................................................1-11.1.2 copy configuration...................................................................................................1-21.1.3 description...............................................................................................................1-41.1.4 display brief interface..............................................................................................1-51.1.5 display interface......................................................................................................1-61.1.6 display loopback-detection......................................................................................1-91.1.7 display transceiver-information interface..............................................................1-101.1.8 display port............................................................................................................1-111.1.9 display unit............................................................................................................1-111.1.10 duplex..................................................................................................................1-131.1.11 flow-control..........................................................................................................1-141.1.12 flow-interval.........................................................................................................1-141.1.13 giant-frame statistics enable...............................................................................1-151.1.14 interface...............................................................................................................1-161.1.15 jumboframe enable.............................................................................................1-171.1.16 loopback..............................................................................................................1-171.1.17 loopback-detection control enable......................................................................1-181.1.18 loopback-detection enable..................................................................................1-191.1.19 loopback-detection interval-time.........................................................................1-201.1.20 loopback-detection per-vlan enable....................................................................1-201.1.21 mdi.......................................................................................................................1-211.1.22 multicast-suppression.........................................................................................1-221.1.23 port access vlan..................................................................................................1-231.1.24 port hybrid pvid vlan............................................................................................1-231.1.25 port hybrid vlan....................................................................................................1-241.1.26 port link-type........................................................................................................1-251.1.27 port trunk permit vlan..........................................................................................1-261.1.28 port trunk pvid vlan..............................................................................................1-271.1.29 reset counters interface.......................................................................................1-281.1.30 shutdown.............................................................................................................1-281.1.31 speed...................................................................................................................1-291.1.32 unicast-suppression............................................................................................1-301.1.33 virtual-cable-test..................................................................................................1-30第1章端口基本配置命令1.1 端口基本配置命令1.1.1 broadcast-suppression【命令】broadcast-suppression { ratio | pps max-pps }undo broadcast-suppression【视图】系统视图/以太网端口视图【参数】ratio：指定以太网端口允许接收的最大广播流量的带宽百分比，取值范围为1～100，缺省值为100，步长为1。

目录第1章GVRP配置命令...........................................................................................................1-1 1.1 GARP配置命令..................................................................................................................1-1 1.1.1 display garp statistics..............................................................................................1-11.1.2 display garp timer....................................................................................................1-11.1.3 garp timer................................................................................................................1-21.1.4 garp timer leaveall...................................................................................................1-41.1.5 reset garp statistics.................................................................................................1-41.2 GVRP配置命令..................................................................................................................1-5 1.2.1 display gvrp statistics..............................................................................................1-51.2.2 display gvrp status..................................................................................................1-61.2.3 gvrp.........................................................................................................................1-61.2.4 gvrp registration.......................................................................................................1-7第1章GVRP配置命令1.1 GARP配置命令1.1.1 display garp statistics【命令】display garp statistics [ interface interface-list ]【视图】任意视图【参数】interface-list：需要显示的以太网端口列表，表示方式为interface-list＝{ interface-type interface-number [ to interface-type interface-number ] } &<1-10>。