致明兴条码打印机说明书

条码打印机和条码扫码枪使用说明系统条码打印驱动设置一．驱动设置：1.点击操作系统 设备和打印机，进入设备和打印机页面，如图。

2.在设备和打印机下面找到DASCOM DL-620Z打印机。

3.右键点击DASCOM DL-620Z打印机，选择打印首选项，进入打印首选项设置页面，在卷下面选择卷名称为：USER，点击编辑对USER进行编辑，设置标签大小点击确定即可。

二.系统设置1.登录后台mange页面，在二次开发（参数制作员）→单据定义→单据设计点击功能预览进入单据设计页面，如图。

2.选择资产配置，在资产配置下面设置所有资产分类的条码打印，如图：3.具体设置以通用设备为例。

通用设备 设计进入通用设备设计界面，如图：4.通用设备下面选择打印页签，在打印页签下面选择当前打印模版为条码打印，如图。

5.在条码打印页面设计条码大小和需要打印的字段。

点击条码打印设计框空白区域，右边出现纸张设置页面即可设置纸张大小，选择纸张为自定义，然后在设置自定义纸张的高和宽（纸张大小按照条码打印机提供纸张大小设置即可），如图：6.纸张大小设置完以后，在纸张大小上面添加字段即可。

整个字段添加完以后点击保存即可。

资产系统条码打印设置1.行政事业单位登录系统，进入卡片管理 资产卡片查看页面，如图：2.资产卡片查看页面，在需要打印的资产卡片复选框中挑勾，（系统提供单张打印，多张打印及全部打印）然后点击打印下拉箭头选择打印单据，如图。

3.在打印单据页面选择打印模版为条码打印，点击确定进入打印预览页面，如图。

4.打印预览页面选择打印图标，即可弹出打印设置，打印设置下设置打印机和纸型（打印机选择DASCOM DL-620Z，纸型选择USER），如图。

条码扫码枪使用说明一、Mange后台设置1.登录后台mange页面，在资产管理（系统管理员）→系统管理→系统管理→系统选项设置下设置清查条码导入导出设置，如图。

2.系统选项设置→系统选项→清查条码导入导出设置设置具体导入导出路径（注意：到处文件路径必须为：\dc\dc.txt，导入文件路径必须为：\Storage Card\AutoRun\盘点导出单\盘点单.txt）如图。

7. Always obtain first aid or medical attention immediately after an injury. Never neglect an injury, no matter how slight it seems.
EZ-1105 / EZ-1305 User’s Manual
Only use with power supply adapter model: WDS043240 (5A).
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EMS AND EMI COMPLIANCE STATEMENT FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to electromagnetic compatibility based on the standards EN 55022:1998+A1:2000+A2:2003, CISPR 22 , Class A EN 55024:1998+A1:2001+A2:2003, IEC 61000- 4 Series EN 61000-3-2 / 2000 & EN 61000-3-3 / 1995. The equipment also tested and passed in accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits.

B A RC ODE P R I N T E R条形码打印机操作手册 R e v.C(AC220～240V 电压专用)E SW（400dpi ）安全上注意事项为了安全并正确使用打印机标记意思本手册、其它操作手册及装置上显示出各种标记。

如正确使用制品,可防止危害您和其他人以及损害财产。

下面是图例和解释。

警告注意为了安全使用本机,请遵守以下内容。

警告为了安全使用本机,请勿必遵守以下原则。

注意前言这次,购买日东电工DURA PRINTER SW,谨此表示衷心的谢意。

DURA PRINTER SW使用指定的专用标签纸和碳带,是采用热传转印感的标签纸打印机。

为了以最好的状态下长期使用DURA PRINTER SW,本书说明操作方法及维护保养方法。

使用前,请先阅读本操作说明书。

请保存操作说明书及包装说明书。

如通过个人电脑使用本打印机打印,需以SCSI接口将本打印机与个人电脑连接。

我们推荐SCSI接口在如下条件中使用。

E Adaptec社制作。

使用SCSI host adapter（于2002年2月的型号）。

型号：AVA-2915LP、AHA-2910C按照包装箱内的《设置方法手册》,安装打印机的驱动器及由打印机的驱动器设置功能设置。

由于装置改造及变更,您购买的装置会有与本书的插图及记载事项不一样的地方,请原谅。

E Windows在美国以及其它国家均为美国Microsoft Corporation的注册商标或商标。

E Adaptec均为Adaptec社的注册商标。

E在本手册以及说明书上所记载的公司名称、产品名称均为各个公司的注册商标或商标。

使用标签纸・碳带时注意事项DURA PRINTER是使用专用标签纸・碳带的热转印标签打印机。

专用标签纸有DURATACK系列,专用碳带有DURAINK 系列,可提供给顾客。

若使用指产品以外时发生的问题全归于顾客责任。

下面写DURATACK系列于DURAINK系列的使用时注意事项,请继续看下面。

P R IN T E R SDL3700 ProDL3800 Prow w w.f u j i t s u-e u r o p e.c o m S R P-378P-199911•Print Technology: Dot Matrix •Printing speed (letter, 10 cpi):113cps•Printing speed (draft, 12 cpi):432cps•Resolution: 360 x 360 dots per inch •Interface (standard): Centronics or Centronics + RS232 (Auto switching)•Print line: 80 columns (DL3700 Pro), 136 columns (DL3800 Pro)24 Wire Dot Matrix PrinterStandard FeaturesAn auto-load function offering ease and flexibility in paper handling, a built in removable bi-directional tractor for rear or bottom feeding of continuous forms.Bar Code printing, printing first row and first column are all no problem for the DL3700 Pro and DL3800 Pro. Other features include print head protection,the availability of an optional sheet feeder and having a much smallerfootprint than other printers in its class.Two outstanding bonus features are the optional colour kit and the printers’ use of an environmentally friendly refillable ribbon cartridge.Fujitsu’s DL3700 Pro and DL3800 Pro printers print at up to 432 characters per second at 12 characters per inch, and yet deliver quiet printing at 49 dBA.Technical SpecificationsModel DL3700 Pro DL3800 Pro Printing technology 24-wire dot matrix, impact type logic-seeking, bi-directional Printing speedHigh-speed draft quality: 432 cps (12 cpi) 360 cps (10 cpi)Draft quality: 432 cps (12 cpi) 360 cps (10 cpi)Correspondence/Report quality: 270 cps (12 cpi) 225 cps (10 cpi)Letter quality: 135 cps (12 cpi) 113 cps (10 cpi)Resolution Max. 360 x 360 dpi Character sets IBM PC char. sets 1 and 2, IBM PS/2 char. sets (code pages 437, 850, 851, 852, 855, 862, 863, 865, 866), ISO 8859-1/ECMA 94National character sets (USA, UK, German, French, Italian, Spanish, Swedish, Finnish, Norwegian,Danish 1 and 2, Hungarian 1 and 2, Slovenian 1 and 2, Mazowia 1 and 2, Polish 1 and 2, Latin 1 and 2, Latin P, PG-DHN, Elot 927, Lithuanian 1 and 2, Mik, Macedonian, PG-MAC, ABY-ABG, DEC GR, GREEK 11, HBR-OLD, HBR-DEC,ISO Tarkish, ISO Latin, Kamenicky 1 and 2, Turkish 1 and 2, Elot 928, and Cyrillic)Bar code (Code 3 of 9, UPC Type A, with check character, Codabar, EAN13, EAN8, Industrial 2 of 5,Matrix 2 of 5, Interleaved 2 of 5, and Code 128)Resident fonts Bitmap font: Courier 10, Prestige Elite 12, Boldface PS, Compression, Draft,High-speed draft, OCR-B, OCR-A, Correspondence, PICA 10Outline Font: Courier, Nimbus Sans ®, and Timeless.Input buffer Max. 128 KB Print line 80 columns at 10 cpi 136 columns at 10 cpi Line feed speed 60 ms at 6 lpi Form feed speed 5.6 ips Number of copies Max. 5 (including original)Paper sizes 102 mm to 267 mm 102 mm to 420 mm(4.0 in. to 10.5 in.) width (4.0 in. to 16.5 in.) widthMax. 0.35 mm (0.014 in.) thickness (depending on paper)Max. 0.35 mm (0.014 in.) thickness (depending on paper)Form feeders Standard: Friction-feed platen, convertible bi-directional tractor on rear and bottom.Optional: ASF100 Series Single-bin cut sheet feeder.Interface Centronics, Centronics and RS-232C (Centronics; Bi-directional Centronics (nibble mode))Emulations Fujitsu DPL24C PLUS, IBM ProPrinter XL24E, Epson ESC/P2Word processing functions Outline, Image overlay, Overscore, Underscore, Superscript, Subscript, Bold overprint, Shadow,Justify, Italic, Multiple height (up to 11 fold), Multiple width (up to 11 fold)Power requirements 100 V AC to 120 V AC ±10%, single-phase, 50 Hz to 60 Hz220 V AC to 240 V AC +6%, -10%, single-phase, 50 Hz to 60 HzDimensions (H x W x D)133 mm x 434 mm x 330 mm (6.2 in. x 17.1 in. x 13 in.)130 mm x 570 mm x 330 mm (5.1 in. x 22.4 in. x 13 in.)Weight 7.5 kg (16.5 lbs.) 8.5 kg (18.7 lbs.)Acoustic noise level 53 dBA MTBF (Mean time between failures) More than 8,000 power-on hours at 25% duty cycle Head life 400 million strokes (each wire)Ribbon life Black: 5.0 million charactersColor: 0.3 million characters Specifications are subject to change without notice. For the latest detailed information, contact your local representative. All brand names and product names are trademarks and registered trademarks of their respective holders.P R I N T E R SEuropean contacts:FUJITSU EUROPE LTD.2 Longwalk Road, Stockley Park,Uxbridge, Middlesex. UB11 1AB, ENGLAND.Phone: (44-20) 8573-4444 Fax: (44-20) 8573-2643FUJITSU DEUTSCHLAND GmbH Frankfurter Ring 211,80807 München, GERMANY.Phone: (49-89) 32378-0 Fax: (49-89) 32378-100FUJITSU NORDIC AB Kung Hans väg 12,S-192 68 Sollentuna, SWEDEN.Phone: (46-(0)8) 626-4500 Fax: (46-(0)8) 626-4588FUJITSU ITALIA S.p.A.Via Nazario Sauro, 3820099 Sesto San Giovanni (MI), ITALY.Phone: (39-02) 26294-1Fax: (39-02) 26294-201FUJITSU FRANCE S.A.1 Place Des Etats-Unis, SILIC 310,94588 Rungis cedex, FRANCE.Phone: (33-1) 4180-3888Fax: (33-1) 4180-3850w w w .f u j i t s u -e u r o p e .c o m。