SnapShare安装使用手册

SNAP-LCM4DINSNAP TEX Mounting/Wiring Tools and Spare PartsPAGE1DATA SHEETForm 1772-130109SNAP TEX Mounting/Wiring Tools and Spare PartsOpto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • SALES800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT800-835-6786•951-695-3080•FAX951-695-3017•******************© 2008–2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.FeaturesSecurely mount SNAP I/O racks, controllers, and power supplies to DIN railsEasily jumper 4-channel digital I/O modules Commission high-density digital modules Replace lost or damaged partsUse legacy and current brains and mounting racks togetherDescriptionSNAP TEX mounting and wiring tools and spare parts are all part of the SNAP TEX family of wiring and mounting accessories. The parts in this data sheet are used for:•Securely mounting SNAP I/O racks, controllers, power supplies, and other devices on DIN rails•Wiring and commissioning SNAP I/O modules •Replacing lost or damaged parts•Adapting legacy parts to newer SNAP PAC parts For cables and breakout boards in the SNAP TEX family, see form #1756, the SNAP TEX Cables and Breakout Boards Data Sheet .DIN-Rail Mounting Clips and KitsOpto 22 SNAP I/O mounting racks, controllers, power supplies, breakout boards, etc. can be panel mounted or DIN-railmounted. For DIN-rail mounting, these clips and kits adapt the bottom of the hardware to attach securely to DIN rails. Choose the kit or clips you need based on the table on page 2.Operator Interface for SNAP HDD ModulesThe OptoTerminal-G20 makes it easier to commission and troubleshoot SNAP high-density digital (HDD) modules such as the SNAP-IAC-16 and the SNAP-ODC-32-SRC.The OptoTerminal-G20 displays the status of a high-density digital module’s points on a two-line LCD display and can also be used to turn output points on and off. See Opto 22 form 1547, the SNAP High-Density Digital Modules User’s Guide , for more details.SNAP TEX FamilyPart NumbersPartDescriptionDIN-Rail MountingSNAP-PSDIN DIN-rail adapter kit for most SNAP power supplies and controllers SNAP-PSUDIN DIN-rail adapter kit for large-footprint SNAP power suppliesSNAP-ROKDIN DIN-rail adapter kit for SNAP-PAC-SRA or SNAP-RPSWSNAP-TEX-DRC10SNAP PAC rack DIN-rail adapter clip, 10-packSNAP-TEX-REC10W Wide end cap for SNAP PAC racks DIN-rail assemblies, 10-pack SNAP-TEX-REC10N Narrow end cap for SNAP PAC racks DIN-rail assemblies, 10-pack SNAP-S2DIN DIN-rail adapter kit for SNAP-PAC-S2SNAP-LCM4DIN DIN-rail adapter kit for SNAP-LCM4SNAP-CDBBDINDIN-rail adapter kit for classic digital brain boards (E1, B1, B5, B100)Other Tools and PartsOPTOTERMINAL-G20Operator interface for commissioning SNAP high-density digital modules SNAP-STRAPB Pack of 10 jumper straps for digital SNAP I/O modulesSNAP-WIRESTRAPB Pack of 10 jumper connectors for digi-tal SNAP I/O modulesSNAP-MODTOOL SNAP I/O module removal tool, 10-packSNAP-FIELDCONB SNAP module field connector, 10-packSNAP-RCK-B2M Adapter for using legacy SNAP brain on SNAP PAC or M-series racks SNAP-RCK-M2B Adapter for using SNAP PAC or SNAP M brains on SNAP B-series racks SNAP-MR10Mechanical relay replacement for breakout boards, 10 ASNAP TEX Mounting/Wiring Tools and Spare PartsS N A P T E X M o u n t i n g /W i r i n g T o o l s a n d S p a r e P a r t sPAGE 2D A T A S HE E TF o r m 1772-130109Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • SALES800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT800-835-6786•951-695-3080•FAX951-695-3017•******************© 2008–2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.DIN-Rail Clips and KitsFor these SNAP productsClips needed Use this adapter clip Use this end capPower Supplies SNAP-PS5SNAP-PS24SNAP-PS5-24DC 1 kit SNAP-PSDIN N/A SNAP-PS5USNAP-PS24U1 kitSNAP-PSUDINN/AControllers SNAP-PAC-S1SNAP-PAC-S1-W SNAP-PAC-S1-FM 1 kit SNAP-PSDIN N/A SNAP-PAC-S2SNAP-PAC-S2-W1 kitSNAP-S2DINN/AMounting Racks SNAP-PAC-RCK4SNAP-PAC-RCK4-FM 2 clips SNAP-TEX-DRC10* (10 clips in package)SNAP-TEX-REC10W* (10 in package; use 2 per rack)SNAP-PAC-RCK8SNAP-PAC-RCK8-FM SNAP-PAC-RCK12SNAP-PAC-RCK12-FM 3 clips SNAP-PAC-RCK16SNAP-PAC-RCK16-FM4 clipsBreakout Boards SNAP-TEX-MR10-4 2 clips SNAP-TEX-DRC10* (10 clips in package)SNAP-TEX-REC10W* (10 in package; use 2 per rack)SNAP-TEX-MR10-16SNAP-TEX-MR10-16C 3 clipsSNAP-AIMA-HDB SNAP-AIMA-HDB-FM SNAP-AIV-HDB SNAP-AIV-HDB-FM SNAP-IDC-HDB SNAP-IDC-HDB-FM SNAP-TEX-32SNAP-TEX-FB16-H SNAP-TEX-FB16-L 2 clipsSNAP-TEX-DRC10* (10 clips in package)SNAP-TEX-REC10N* (10 in package; use 2 per board)SNAP-ODC-HDB SNAP-ODC-HDB-FM SNAP-SCM-BB43 clipsOther SNAP Devices SNAP-PAC-SRASNAP-RPSW1 kitSNAP-ROKDINN/A* Requires the black plastic extrusion that comes with new racks and boards. Older racks and boards have a light-colored plastic extrusion. The black plastic extrusion is not sold separately. It is included with a new board or rack.SNAP-PSDIN SNAP-TEX-DRC10SNAP-TEX-REC10WSNAP TEX Mounting/Wiring Tools and Spare PartsSNAP TEX Mounting/Wiring Tools and Spare PartsDATA SHEETForm 1772-130109PAGE 3Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • SALES800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT800-835-6786•951-695-3080•FAX951-695-3017•******************© 2008–2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Racks: Installing SNAP Rack DIN-Rail Clips1.For racks with three or more clips only: Slide one DIN clip to the middle position and secure with the providedrivet. For racks with four clips, add an additional middle clip.2.Insert one edge of the circuit board into the extrusion.3.Push down hard on the other edge to snap the board into place.4.Attach one DIN clip to each end cap using the slots in the end caps as shown.5.Using the screws provided, secure an end cap and DIN clip assembly to each end of the extrusion.Attaching the Adapter Clip to a DIN Rail1.Hook the DIN-rail clip over the top of the DIN rail.ing a screwdriver, pry open the DIN-rail clip flange at the bottom of the clip. Push the clip towards the DIN rail.3.Snap the DIN-rail clip into place.To remove : Use a screwdriver to pry open the DIN-rail clipflange.Power Supplies: Installing SNAP-PSDIN Adapters1.Remove the four screws that fasten the panel mounting base plate to the power supply.2.Remove the panel mounting base plate making sure to save the screws .3.Using the two flat-head screws included with the kit, assemble the SNAP-PSDIN-RAIL adapter as shown.ing the four screws removed in step 1, fasten the DIN-rail adapter to the power supply.5.Mount the power supply on the DIN rail next to the rack or controller it will power.Rivet23154321DINExtrusio nNOTE: The SNAP-PS5-24DC power supply is shown. Other power supplies have similar base plates.SNAP TEX Mounting/Wiring Tools and Spare PartsS N A P T E X M o u n t i n g /W i r i n g T o o l s a n d S p a r e P a r t sPAGE4D A T A S HE E TF o r m 1772-130109Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • SALES800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT800-835-6786•951-695-3080•FAX951-695-3017•******************© 2008–2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Installing the SNAP-ROKDIN Adapter KitThis adapter kit is for the SNAP-PAC-SRA arbiter or the SNAP-RPSW redundant power switch. The DIN-rail clip adds an additional 0.375 inches (0.95 cm) to the device’s height. You need one adapter kit per device.1.Turn the device over. Unscrew the four flat-head screwsand remove the base plate. Save the screws.2.Attach the new, plain base plate to the device using thesaved screws.3.Align the DIN-rail clip to the new base plate so that thespring will be at the bottom of the device when it is mounted on the DIN rail. Use the two round-head screws provided with the kit to attach the clip..4.To mount, align the spring clip with the bottom edge of the DIN rail, push up to engage the spring, and slip the two top flanges over the top edge of the DIN rail.Wiring AccessoriesJumper Straps for SNAP Digital I/OSNAP I/O module jumper straps let you easily make jumper connections on a 4-channel digital SNAP I/O module. The SNAP-STRAPB plugs into individual wire connections on a module’s pluggable field connector. SNAP-STRAPBs on multiple modules can be connected using the SNAP-WIRESTRAPB .Both parts are Factory Mutual approved.For other wiring options, see form #1756, the SNAP TEX Cables and Breakout Boards Data Sheet .Length of wire between connectors = 3.25" (8.26 cm)SNAP TEX Mounting/Wiring Tools and Spare PartsSNAP TEX Mounting/Wiring Tools and Spare PartsDATA SHEETForm 1772-130109PAGE 5Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • SALES800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT800-835-6786•951-695-3080•FAX951-695-3017•******************© 2008–2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Other AccessoriesReplacement PartsThe SNAP-FIELDCONB replaces lost or damaged fieldconnectors (pack of 10). The connector plugs into the top of a SNAP I/O module and is used for wiring field devices to the module. Used with most 1-, 2-, and 4-channel digital and analog modules, it accepts up to 14 AWG wire. Torque specifications for connector screws: 5.26 inch lbs (0.6 Newton m.)The SNAP-MR10 is a replacement mechanical relay (10 A) and clip for SNAP-TEX-MR10-16, SNAP-TEX-MR10-16C, and SNAP-TEX-MR10-4 breakout boards. Typical life expectancy (Electrical): 1 x 105.SNAP I/O Module Removal ToolThe SNAP-MODTOOL , included with each I/O mounting rack, is used to remove a SNAP I/O module from the rack. If you need extra tools, order this pack of 25.To remove a module:1.If the modules are held in place with screws, removethem.2.Holding the SNAP module tool (provided) as shown inthe illustration below, insert it into the notch at the base of the module.3.Squeeze the module tool against the module to openthe release latch, and pull straight up on the module to remove it.Rack Adapters for Mixing Legacy and Current Brains and RacksWhile it’s always best to use brains and racks designed to work together, sometimes mixing them is temporarily necessary. Two rack adapters are available:•SNAP-RCK-B2M allows a legacy SNAP brain such as a SNAP-B3000-ENET (blue connector) to be used on a SNAP PAC rack or a SNAP M-series rack (black connector). •SNAP-RCK-M2B allows a newer SNAP PAC brain or rack-mounted controller, such as a SNAP-PAC-EB2 or a SNAP-PAC-R1 (black connector), to be used on an older SNAP B-series rack (blue connector). Please note that the adapter does not change thefunctionality or limitations of the older products. For example, when used with a newer brain or controller, a SNAP B-series rack is still limited to using digital modules only in its first eight slots.For additional information, see form #1688, SNAP PAC System Migration Technical Note and form #1693, Legacy and Current Product Compatibility Charts .More About Opto 22 • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-121210SALES 800-321-6786•951-695-3000•FAX951-695-3095•****************•SUPPORT 800-835-6786•951-695-3080•FAX951-695-3017•******************© 2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.ProductsOpto 22 develops and manufactures reliable, flexible, easy-to-use hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications.OptoEMU Energy Management SystemThe easy-to-use OptoEMU Sensor monitors electrical energy use in your facility and delivers detailed, real-time data you can see, analyze, and use in building and control systems. The Sensor can monitor energy data from pulsing meters,electrical panels or subpanels, and equipment. View energy data online using a software service or incorporate the data into your control system for complete energy management.SNAP PAC SystemDesigned to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components:•SNAP PAC controllers•PAC Project ™ Software Suite •SNAP PAC brains •SNAP I/O ™SNAP PAC ControllersProgrammable automation controllers(PACs) are multifunctional, modular controllers based on open standards.Opto 22 has been manufacturing PACs for over twodecades. The standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-series, and the software-based SoftPAC™ allhandle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing.SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. Wired+Wireless™ models are also available.PAC Project Software SuiteOpto 22’s PAC Project Software Suite provides full-featured, cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, . PAC Project Professional, available for separate purchase, adds oneSoftPAC, OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial mistic ™ I/O units.SNAP PAC BrainsWhile SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouplelinearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement.SNAP I/OI/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs.Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller).QualityFounded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula,California. Because we test each product twice before it leaves our factory, rather than only testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life.Free Product SupportOpto 22’s California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday–Friday, 7 a.m. to 5 p.m. PST.Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user’s guides, and OptoForums.In addition, hands-on training is available for free at ourTemecula, California headquarters, and you can register online .Purchasing Opto 22 ProductsOpto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-321-6786 or 951-695-3000, or visit our website at .SNAP-LCM4DIN。

C. A im the Camera - Power on the camera and log in to see the live view (see other side of QSG).Aim the camera and then tighten the setscrews.Package Contents• (1) WPS-300-DOM-IP Camera • (1) Extension Mount • (2) Mounting Templates • (1) DC Power Adapter Pigtail• (3) Surface Mounting Screws & Anchors (1 spare)• (3) Surface Extension Mounting Screws (1 spare)• (3) Black Extension Mount Setscrews (1 spare)• (1) Quick Start GuideI. Hardware SetupWARNING! THIS PRODUCT IS NOT WEATHERPROOF. INSTALL INDOORS ONLY!IMPORTANT! DO NOT REMOVE THE PLASTIC FILM FROM THE CAMERA DOME UNTIL INSTALLATION IS COMPLETE!WPS-300-DOM-IPIP Surveillance CamerasQuick Start GuideThank you for purchasing a Wirepath™ IP Surveillance Camera. This quick start guide shows the basics of installing the camera and accessing it from the local network.A.N etwork Connection - The camera must be connected to a LAN using cable that meets TIA/EIA Category 5e standards. Test the cable after termination if possible.Requirements for Network Cable:• Type: Cat5e/6+ ONLY• Terminations: 568B recommended • Max Length: 100 meters (328 feet)PoE Power - If the network equipment supports PoE standard IEEE 802.3af then power can be provided on the Cat5e/6 connection, and no separate 12V DC connection is needed.Requirements for PoE Equipped Port:• Voltage: 44V DC • Wattage: 15.4W • Amperage: 350mAB. 12V DC Power - If PoE is not used, power must be supplied to the external power connector. The correct cable size must be used to prevent voltage drop (minimum 16 AWG).Connect the included power pigtail to the power supply wiring using appropriate connectors (not included). Attach the red lead to the positive conductor and the black lead to the negative conductor.Requirements for Power Supply:• Voltage: 12V DC • Wattage: 12W • Amperage: 1ACamera Cabling and Power RequirementsNeeded for this step:Mounting and Adjustments (Ceiling Mounting Recommended)Needed for this step: Phillips screwdriver for mounting screws, drill for mounting anchors if used, keyhole saw to cut drywall if needed.A. M ark the Location - Use the correct template with the “Front” arrow pointed toward the field-of-view to mark the ceiling.B.M ount the Camera - Install the camera or extension mount using the included hardware. If the extension mount is utilized, use 2 of the small setscrews to secure the camera.Leave the camera screws loose enough to allow field-of-view adjustment using the screw slots.D. C lose the Camera - After installing and adjusting the camera, remove the protective film from the dome and attach it to the camera.Without Ext. MountWith Ext. MountWithout Ext. Mount Tilt RangePan RangeImportant! - When attaching the dome, make sure both release buttons snap into place. If the dome is not securely attached, there could a be a gap between the foam lens grommet and the dome which will cause a halo effect in the camera image.First Time AccessThe fi rst time the camera is accessed from any PC, a plug-in must be installed for the web browser to enable communication with the camera. Afterward, the camera may be accessed by that PC at any time by navigating to the camera’s web address and logging in.a. Connect the PC to the same local network (LAN) the camera is connected to.b. Open the web browser and enter the IP Address that was assigned to the camera. The address should include the port numberassigned to the camera if one was set. See the example:• IP Address using default port 80: http://192.168.1.015•IP Address using port 8015: http://192.168.1.015:8015c. A window will open, asking for a user name and password. Defaultsettings:• User Name: admin •Password: admind.Install the ActiveX control if prompted:e. After installing ActiveX, the camera should be visible in the web browser interface. If the web browser interface does not appear,verify the address using the IP Installer.Next Steps:After the camera is accessible, further setup can be completed using the Confi g menus. Visit the Support Tab on the product page for this camera at to download the manual, IP Installer utility software, and latest fi rmware. Refer to the manual to:a. Set up User Accounts, including administrator access b. Set up remote access using c. Set up NVR connections (if using an NVR for network recording)d. Optimize image and video settingse. Set up advanced sharing and integration of the camera’s four video streamsf.Set up scheduling and motion detection to optimize recording timeWirepath™ IP Installer utility software streamlines identifi cation of the cameras on the network and allows basic IP settings to be established. After the cameras are set up, they can be accessed over the local network by computers and NVRs.Important! The IP Installer can only be used on a PC with a Windows operating system.Initial Setupa. Make sure that all cameras are connected to the network and powered on.b. Get access to a PC connected to the local network with administrator rights in the operating system (must be a Windows PC to use the IP Installer)c. Disable any active VPN connections on the network. These will prevent the IP Installer from working correctly.d. Download the IP Installer utility from the camera’s support tab at . No installation is required for use. Extract the software (if compressed in “.zip”) and move it to the Desktop or folder of your choice.e. Log into the router, set up static IP addresses for each new camera, and record the network settings to be assigned to the camera(s).How to Use the IP Installer Utilitya. Double-click the IP Installer icon to run the software. Allow or accept any Windows system warnings. (No changes will be made to system fi les.) Depending on the computer’s security settings, it may be necessary to log in using the computer’s administrator account for the IP Installer to run.b. Click “Search Device” to scan the network for connected Wirepath™ IP Cameras, NVRs, and Encoders. Wait 30 seconds after powering up a camera to search for it.c. Click the “Exit ” button to close the IP installer when all devices are confi gured.Important! Windows may display an error stating that the software did not install correctly when it closes, but this should be disregarded.How to Confi gure a Camera for AccessCameras are set to DHCP mode by default so that an IP address is automatically assigned for fi rst time access. To ensurecontinuous access to the camera, the address must be changed to a static address reserved for the camera (as detailed in step “1e”, above).a. Click on an item in the Device List to highlight it blue.b. Click the “Static” button over the right column information fi elds. Now the settings can be confi gured. (IP Settings fi elds are greyed out until the mode is set to Static). Enter a value for each of the fi elds in the right column:II. Network Setup - Identifying CamerasIII. Accessing Cameras on the NetworkDevice ListDisplays the Wirepath IP devices connected to the network.Search Device-Click the button torefresh the Device List and see new devices.a. Select “Static” to change settingsb. Name for the camera (limited to 31characters, no spaces)Examples: FrontDoor1, SideDoor c. IP address (static) reserved for thecamera (step 1e)d. Net Mask - usually 255.255.255.0(set all cameras the same)e. Gateway address - found in the router.f.DNS 1 - found in the routerg. DNS 2 - found in the router.Set DNS 2 to“0.0.0.0” if no DNS 2 is set in the router.h. Port - include the last octet of the IPaddress in the port:Examples:Camera IP Address Port Patio192.168.1.0508050Front Door 192.168.1.1008100i.Click “Submit” to update the camerasettings.WPS-300-BUL-IP IP Surveillance CamerasQuick Start Guide。

华为share安装说明
华为Share是华为公司推出的一款文件共享和传输应用。

它可以帮助用户快速方便地在华为设备之间共享文件，例如图片、视频、音乐和文档等。

以下是华为Share的安装说明：
1.打开华为应用商店或者华为官网，搜索并下载华为Share应用。

2.安装完成后，打开应用并登录你的华为账号。

如果没有账号，可以点击注册新账号。

3.在应用的主界面，你可以看到两个选项：发送和接收。

4.如果你想发送文件，点击发送选项，然后选择要发送的文件。

你可以通过WiFi直连或者扫描二维码的方式将文件发送给其他华为设备。

5.如果你想接收文件，点击接收选项，然后等待其他华为设备发送文件给你。

一旦收到文件，你可以选择保存到手机或者其他存储设备。

请注意，为了确保正常使用华为Share，你需要保证你的设备已经连接到稳定的WiFi网络。

此外，华为Share只能在华为设备之间进行文件传输，无法与其他品牌的设备进行互通。

高清日剧片源的下载---Share的使用教程献给所有对日剧有爱的朋友在CG发布日剧整整一年了，很多网友都在询问我这些日剧的高清片源在哪里？其实，日剧的片源无非通过三个途径来获得：通过日本的P2P工具下载，通过BT拖，还有就是直接购买。

但是用P2P的下载是获取片源最快的方法，国内很多字幕组都是采用P2P的方式下载并制作日剧的。

而关于的P2P软件很多，比如：Share，WINNY等等。

个人感觉还是用Share最舒服，更新及时，下载速度快。

这是Share的界面（由于是中文版，所以在使用中还是感觉挺方便的）：接下来，开始一步一步的设置。

点击左上角的设置，弹出下面的菜单：分别有：群集设置、常规设置、插件设置、过滤器设置根据使用的经验，只需要对前三项进行设置即可。

打开群集设置，会显示如下对话框：所谓群集设置，是对你需要搜索的文件类型进行归类。

你可以按照自己的喜好，多多的设置你需要下载的类型。

但最多只能在自己设置的类型里，选择五项作为主要的搜索类型。

也就是说，如果你并没有把DVDISO选择进去，那么你在搜索中很可能搜不到你想要的DVDISO。

所以请尽量将你需要下载的群集选择进去。

为了方便大家，提供几个常用的。

大家只需要复制粘贴就可以了。

动画---アニメ漫画---コミック游戏---ゲーム杂志---雑誌DRAMA---ドラマ专辑&原声带---アルバムサントラ单曲---シングル高质量音乐---EACDVD镜像文件---DVDISO程序---アプリ接下来是常规设置，首先是ID设置。

在“设置文件”里点击“设置”在“昵称”里填上你个人喜好的名字，并在“代号文字”里也可以根据自己的喜好来填。

完成之后，点击“添加”，“确定”退出。

这个ID等于share里的一个标志，如果想下载这个ID的共享文件，直接输入ID scan你的资源名就可以了。

“网络”里的上传和下载速度可以根据自己的情况来填写。

不过，不要把上传速度设的太低，否则下载的速度也不会很快。