JUMO温度传感器培训资料

Page 1/4JUMO GmbH & Co. KGDelivery address:Mackenrodtstraße 14,36039 Fulda, GermanyPostal address:36035 Fulda, Germany Phone:+49 661 6003-0Fax:+49 661 6003-607e-mail:*************Internet:JUMO Instrument Co. Ltd.JUMO HouseTemple Bank, RiverwayHarlow, Essex CM 20 2TT, UK Phone:+44 1279 635533Fax:+44 1279 635262e-mail:*************.uk Internet:JUMO PROCESS CONTROL INC.885 Fox Chase, Suite 103Coatesville PA 19320, USA Phone:610-380-80021-800-554-JUMOFax:610-380-8009e-mail:****************Internet:Block structureKey featuresk Limit monitoringk Available for resistance thermometer, thermocouple, standard current or voltage signals, according to choice k 10A relay (changeover contact)k Adjustable switching hysteresis k Programmable switch-on delay after power-on k Configurable alarm suppression k Symbols in display for temperature unit, minutes and seconds k Parameter level protected by code k Setup program for configuration and archiving via PC k Customized linearization via tabular function in the setup program k UL approvalDigital Indicator76mm x 36mm formatBrief descriptionThe JUMO di eco compact digital indicator is used for the simple visualization of temper-atures or standard signals. The measurement input permits the connection of resistance thermometers or thermocouples, or standard current or voltage signals. The measured value is shown on a 3-digit backlit display.Limit infringements are monitored by means of a 10A relay (changeover contact) and in-dicated by an LED.The 3 keys on the front panel can be used to configure, among others, the switching hys-teresis and alarm suppression.The electrical connection is made via screw terminals on the back of the instrument.A setup program and a PC interface are available as accessories, for simple configuration and parameterization from a PC.Type 701540/...Displays and controlsprogrammingincrease decrease version The instrument is linked to the PC via a PC interface withTTL/RS232 converter and adapter (3-pin).++Technical dataAdditional dataAmbient conditionsAmbient temperature range0to+55°CAmbient temperature rangewith side-by-side mounting0to+40°CStorage temperature range-40to+70°CTemperature drift≤100ppm/°C of measuring rangeClimatic conditions≤75% rel. humidity, no condensationCleaning and care of front panel The front panel can be cleaned with all the usual cleaning and rinsing agents.Do not use solvents such as methylated spirit, white spirit, P1 or xylene! OutputRelay150,000 operations at 10A 250V AC 50Hz resistive loadSupplySupply voltage230V AC +10/-15%, 48—63Hz or 115V AC +10/-15%, 48—63Hz (isolated from measurement input) 12—24V DC +15/-15%, 24V AC +15/-15%, 48—63Hz (not isolated from measurement input) Power consumption<3VAHousingElectrical dataConnection diagramType 701540/XX1-31: Measurement input and supply voltage are not isolated from each other!DimensionsMaterial polycarbonateMountingin panel cut-out with bezel sealOperating position unrestricted Weight approx. 160g Protection front IP65,rear IP20Flammability classUL 94 V0Data backup EEPROMConnectionvia screw terminals for wire cross-sections up to 4 mm 2 solid wireand 2.5 mm 2 stranded wireEMC- interference emission - immunity to interference EN 61326Class Bto industrial requirementsOperating conditions The instrument is designed as a panel-mounting unit.Electrical safetyto EN 61010, Part 1overvoltage category III, pollution degree 2Standard accessories- 1 Operating Manual B 70.1540.0-1 mounting frame -1 bezel sealAccessoriesSetup program, multilingualPC interface with TTL /RS232C converter and adapter (pins)Order details(1) Basic version 701540/JUMO di eco(2) Basic type extension Version8factory-set, configurable within the measurement input group9configured to customer specifications Measurement input group 11Pt100 in 2-wire circuit Pt1000 in 2-wire circuit KTY2X-62Fe-Con J Fe-Con L NiCr-Ni K 30—20mA 4—20mA40—10V1 1 relay (changeover contact 10A 250V)(3) Supply02230V AC +10/-15% 48—63Hz 05115V AC +10/-15% 48—63Hz 3112—24V DC +15/-15% /24V AC +15/-15% 48—63Hz (4) Approvals 000none061Underwriters Laboratories Inc. (UL)(1)(2)(3)(4)Order code / - -Order example 701540/811-02 -000factory-set1.) It is not possible to switch from one meas. input group to anotherSuitable transducers can be found in these data sheets:- 90.2005 Push-in resistance thermometers - 90.2105 Screw-in resistance thermometers- 90.1002 and subsequent ones for screw-in thermocouples - 90.1101 and subsequent ones for push-in thermocouples - 90.1221 Mineral-insulated thermocouples。

Page 1/11Data Sheet 702040Blocks tructureFeature sk S tructured operating and programming layout k S elf-optimi s ation k Ramp functionk Timer functionk Digital input filter withprogrammable filter time con s tant k 1 limit comparator k limit s witchJUMO iTRON 04/08/16/32Compact microproce ss or controller sHou s ing for flu s h-panel mounting to DIN IEC 61554Brief de s criptionThe JUMO iTRON controller s erie s compri s e s univer s al and freely programmable com-pact in s trument s for a variety of control ta sks . It con s i s t s of five model s , with the bezel s ize s 96mm x 96mm, 96mm x 48mm in portrait and land s cape format, 48mm x 48mm and 48mm x 24mm.The controller s feature a clearly readable 7-s egment di s play which, depending on the ver-s ion, i s 10 or 20 mm high, for proce ss value and s etpoint indication or for dialog s . Only three k ey s are needed for configuration. Parameter s etting i s arranged dynamically, and after two operation-free s econd s the value i s accepted automatically. S elf-optimi s ation,which i s provided a s s tandard, e s tabli s he s the optimum controller parameter s by a k ey s tro k e. The ba s ic ver s ion al s o include s a ramp function with adju s table gradient s . A timer function ha s been integrated a s an extra.All controller s can be employed a s s ingle-s etpoint controller s with a limit comparator, or as double-s etpoint controller s . The lineari s ation s of the u s ual tran s ducer s are stored. Pro-tection i s IP66 at the front and IP20 at the bac k . The electrical connection i s by a plug-in connector with s crew terminal s .The input s and output s are s hown in the bloc k s tructure below.JUMO iTRON 08Type 702042JUMO iTRON 04Type 702044JUMO iTRON 08Type 702043JUMO iTRON 32Type 702040JUMO iTRON 16Type 702041Approval s /approval mark s (s ee "Technical data")Data Sheet 702040Page 2/11Technical dataThermocouple inputRe s i s tance thermometer inputStandard s ignal inputMea s urement circuit monitoring 1De s ignation Range 1Mea s urement accuracy Ambienttemperature error Fe-Con L Fe-Con J EN 60584Cu-Con U Cu-Con T EN 60584NiCr-Ni K EN 60584NiCr S i-Ni S i N EN 60584Pt10Rh-Pt S EN 60584Pt13Rh-Pt R EN 60584Pt30Rh-Pt6Rh BEN 60584-200to +900°C -200to +1200°C -200to +600°C -200to +400°C -200to +1372°C -100to +1300°C0— 1768°C 0—1768°C +300— 1820°C≤0.4%≤0.4%≤0.4%≤0.4%≤0.4%≤0.4%≤0.4%≤0.4%≤0.4%100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°CCold junctionPt 100 internal1. The s e range s refer to the ambient temperature of 20°CDe s ignation Connection type RangeMea s urement accuracy Ambienttemperature error Pt 100 EN 607512-/3-wire -200to +850°C ≤0.1%50 ppm/°C Pt 1000 EN 607512-/3-wire -200to +850°C ≤0.1%50 ppm/°C K TY11-62-wire-50to +150°C≤1.0%50 ppm/°CS en s or lead re s i s tance 20Ω max. per lead for 2- and 3-wire circuitMea s urement current 250µALead compen s ationNot required for 3-wire circuit. For 2-wire circuit, lead compen s ation can be implemented in s oftware through proce ss value correction.De s ignation RangeMea s urement accuracy Ambienttemperature error Voltage0—10V , input re s i s tance R E > 100k Ω2—10V , input re s i s tance R E > 100k Ω0—1V , input re s i s tance R E > 10M Ω10,2—1V , input re s i s tance R E > 10M Ω1≤0.1%≤0.1%≤0.1%≤0.1%100 ppm/°C 100 ppm/°C 100 ppm/°C 100 ppm/°C Current4—20mA, voltage drop 3V max.0—20mA, voltage drop 3V max.≤0.1%≤0.1%100 ppm/°C 100 ppm/°C1. for Type 702040/41 with 2 relay output s (option)Tran s ducer Overrange/underrangeProbe /lead s hort-circuit 1Probe/lead breakThermocouple•-•Re s i s tance thermometer •••Voltage 2—10V / 0.2—1V0—10V/ 0—1V •••-•-Current4—20mA 0—20mA•••-•-1. In the event of a fault, the output s move to a defined s tatu s (configurable).= factory s etting •recogni s ed-not recogni s edData Sheet 702040Page 3/11Output sControllerTimerElectrical dataHou s ingA ss ignment Type 702040/41Type 702042/43/44Output 1relayrelay Output 2logic 0/5V or logic input logic 0/5V Output 2 (option)logic 0/12V or logic input logic 0/12V Output 2 (option)relay not po ss ible Output 3not availablerelayTechnical data Relay ratingcontact life n.o. (ma k e) contact 3A at 250VAC re s i s tive load 150 000 operation s at rated loadLogiccurrent limiting load re s i s tance 0/5V 20mAR load 250Ω min .Logiccurrent limiting load re s i s tance 0/12V 20mAR load 600Ω min.= factory s ettingController types ingle-s etpoint controller with limit comparator, double-s etpoint controllerController s tructure s P/PD/PI/PIDA/D converter re s olution better than 15 bitS ampling time210m s ec/250m s ec with activated timer functionAccuracy0.7% ± 10ppm/°CS upply (s witch-mode power s upply)110—240V -15/+10%AC 48—63Hz, or 20—30V AC/DC 48—63Hz, or10—18V DC (Connection to S ELV or PELV)Te s t voltage s (type te s t)to EN 61010, Part 1, March 1994,overvoltage category II, pollution degree 2, for Type 702040/41overvoltage category III, pollution degree 2, for Type 702042/43/44Power con s umption max. 7VA Data bac k upEEPROMElectrical connectionat the rear, via plug-in s crew terminal s ,conductor cro ss -s ection up to 1.5mm 2 (1.0mm 2 for Type 702040/41) or2x 1.5mm 2 (1.0mm 2 for Type 702040/41) with ferrule sElectromagnetic compatibility interference emi ss ion interference immunity EN 61 326Cla ss Bto indu s trial requirement sS afety regulationto EN 61010-1In s tallation height maximum 2000 m above s ea levelCa s e typePla s tic ca s e for panel mounting acc to. IEC 61554 (indoor u s e)Dimen s ion s in mm (for Type)702040702041702042702043702044Bezel s ize48x 2448x 4848x 96(portrait)96x 48(land s cape)96x 96Depth behind panel100100707070Panel cut-out45+0.6x 22.2+0.345+0.6x 45+0.645+0.6x 92+0.892+0.8x 45+0.692+0.8x 92+0.8Ambient/s torage temperature range 0—55°C /-40 to +70°CData Sheet 702040Page 4/11Approval s /approval mark sDi s play and control sSelf-optimi s ation (SO)The s tandard s elf-optimi s ation facility produce s an automatic adju s tment of the controller to the proce ss .S elf-optimi s ation determine s the controller parameter s for PI and PID controller s (proportional band, re s et time, derivative time), a s well a s the cycle time and the filter time con s tant of the digital input filter.Ramp functionClimatic condition s not exceeding 75% rel. humidity, no conden s ationOperating po s ition unre s tricted Protection to EN 60529,IP66 at the front, IP20 at the bac kWeight75g approx.95g approx.145g approx.160g approx.200g approx.Approval mark Te s ting agencyCertificate/certification numberIn s pection ba s i sValid forUL Underwriter Laboratorie s E201387UL 61010-1all device s C S A C S A-Approval232831CAN/C S A-C22.2No. 61010.1-04all device sData Sheet 702040Page 5/11Limit comparatorLimit s witch (extra code)If the limit comparator function i s active, then the s witched s tate will have to be re s et by hand.Precondition: the condition that cau s ed the alarm i s no longer pre s ent (for l k 8: proce ss value < AL). The di s play s how s the alarm s tatu s .The alarm s tatu s will be retained after a power failure.Timer function (extra code)U s ing the timer function, the control action can be influenced by mean s of the adju s table time t i 0. After the timer ha s been s tarted by power ON, by pre ss ing the k ey or via the logic input, the timer s tart value t i 0 i s counted down to 0, either in s tantly or after the proce ss value ha s gone above or below a programmable tolerance limit. When the timer ha s run down, s everal event s are triggered, s uch a s control s witch-off (output 0%) and s etpoint s witching. Furthermore, it i s po ss ible to implement timer s ignalling during or after the timer count, via an output.The timer function can be u s ed in conjunction with the ramp function and s etpoint s witching.Table: Timer function s (u s ing the example of a rever s ed s ingle-s etpoint controller)Data Sheet 702040Page 6/11Tolerance limitThe po s ition of the tolerance limit depend s on the controller type:- S ingle-s etpoint controller (rever s ed, heating): Tolerance limit i s below the s etpoint - S ingle-s etpoint controller (direct, cooling): Tolerance limit i s above the s etpoint - Double-s etpoint controller: Tolerance limit i s below the s etpointIf, during the control proce ss , the proce ss value goe s above/below the tolerance limit, then the timer will be s topped for the duration of the infringement.Di s play and operationThe timer value i s di s played at the operating level and remain s s o permanently (no time-out).Operation i s from the k eypad, when the timer value i s vi s ible in the di s play, or via the logic input. The operating option s compri s e s tart,s top, continue and cancel timer function, and are s hown differently in the di s play.The current timer value and the timer s tart value are acce ss ible and adju s table at any time at a s eparate timer level.Data Sheet 702040Page 7/11Parameter and configurationOperating levelParameter levelConfiguration levelDe s ignation Di s play Factory s ettingValue range S etpointSP /SP1/SP20S PL—S PH Ramp s etpointSPr 0S PL—S PH Timer value/timer s tart valuet i /t i 00 —999.9hDe s ignation Di s play Factory s ettingValue range S etpoint 1SP 10S PL—S PH S etpoint 2SP 20S PL—S PH Limit value for limit comparator AL 0-1999to +9999digit Proportional band 1Pb:100—9999digit Proportional band 2Pb:200—9999digit Derivative time dt 80s ec 0—9999s ec Re s et time rt 350s ec 0—9999s ec Cycle time 1CY 120.0s ec 1.0—999.9s ec Cycle time 2CY 220.0s ec1.0—999.9s ec Contact s pacingdb 00—1000digit Differential (hy s tere s i s ) 1HYS.110—9999digit Differential (hy s tere s i s ) 2HYS.210—9999digit Wor k ing point Y:00%-100to +100%Maximum output Y:1100%0to 100%Minimum output Y:2-100%-100to +100%Filter time con s tant dF 0.6s ec 0.0—100.0s ec Ramp s loperASd—999digitDe s ignation Di s play Factory s etting Value range/s electionTran s ducerC111Pt100Pt100, Pt1000, K TY11-6, T, J, U, L, K , S ,R, B, N, 0 (4)—20mA, 0 (2)—10VDecimal place/unitC112none/°C none, one, two/°C, FController type/output s C113s ee table on next pageLimit comparator function C114no function no function, l k 1—8Ramp functionC115no function no function, °C/min, °C/h Output s ignal on overrange/ underrange C1160% output limit comparator off 0%, 100%, -100% limit comparator on/offLogic inputC117no function k ey / level inhibit,ramp s top, s etpoint s witchingOutput s 1, 2 and 3(only Type 702042/43/44)C118function s a s defined under C113freely configurable(s ee table on next page)Timer functionC120no function s ee de s cription “Timer function”S tart condition for timerC121from k eypad/logic input - power ON - k eypad/logic input- tolerance limitTimer s ignalling C122no function - timer s tart to timer run-down- after run-down for 10s ec - after run-down for 1 min.- after run-down until ac k nowledgementUnit of time (timer)C123mm.ss - mm.ss- hh.mm - hhh.hS tart value of value range SCL0-1999 to +9999 digitData Sheet 702040Page 8/11Controller type/output s (C 113)Expanded configuration option s for the output s on Type 702043/44 (C118)End value of value range SCH 100-1999 to +9999 digit Lower s etpoint limit SPL -200-1999 to +9999 digit Upper s epoint limitSPH 850-1999 to +9999 digit Proce ss value correction OFFS 0-1999 to +9999 digit Differential (hy s tere s i s )HySt 1 0—9999 digitController typeOutput 1Output 2 + 3S ingle s etpoint rever s ed controller limit comparator/timer s ignalling S ingle s etpoint direct controllerlimit comparator/timer s ignallingDouble s etpointcontroller rever s edcontroller direct S ingle s etpoint rever s ed limit comparator/timer s ignalling controller S ingle s etpoint direct limit comparator/timer s ignallingcontrollerDouble s etpoint controller directcontroller rever s ed= factory s ettingOutput 1: Relay (K1)Output 2: Logic (K2)Output 3: Relay 1-s e t p o i n t c o n t r o l l e rFunction s of the output s a s defined under C 113controller output limit comparator timer s ignalling controller output timer s ignalling limit comparator limit comparator controller output timer s ignalling limit comparator timer s ignalling controller output timer s ignalling controller output limit comparator timer s ignalling limit comparator controller output 2-s e t p t .c o n t r o l l e rcontroller output 1controller output 2limit comparator/timer controller output 1limit comparator/timer controller output 2controller output 2controller output 1limit comparator/timer controller output 2limit comparator/timer controller output 1limit comparator/timer controller output 1controller output 2limit comparator/timercontroller output 2controller output 1Data Sheet 702040Page 9/11Dimen s ion sType 702040 / …Type 702043/...Type 702041 / …Type 702044/...Type 702042 / …Typehorizontal vertical 70.2040/418mm min.8mm min.70.2042/43/4410mm min.10mm min.Edge-to-edge mounting(minimum s pacing s of the panel cut-out s)Data Sheet 702040Page 10/11Connection diagram sJUMO iTRON 32, Type 702040, 48mm x 24mm format JUMO iTRON 16, Type 702041, 48mm x 48mm formatJUMO iTRON 08, Type 702042, 48mm x 96mm format (portrait)JUMO iTRON 08, Type 702043. 96mm x 48mm format (land s cape)JUMO iTRON 04, Type 702044, 96mm x 96mm formatStandard ver s ion / Ver s ion with 12V logic outputVer s ion with 2 relay outputs2014-09-01/00357838Data Sheet 702040Page 11/11Order detail sExtra order code s for cu s tomized configuration(2)Ba s ic type exten s ion(3)Input s(1)(2)(3)(4)(5)(6)Type de s ignation 7020../..-...-...-../...,...** Li s t extra code s in s equence, s eparated by comma s(1)Ba s ic type(bezel s ize in mm)40=48x 24, 41 = 48x 48, 42 = 48x 96 (portrait), 43 = 96x 48 (land s cape), 44 = 96x 96(2)Ba s ic typeexten s ion 8899==controller type configurable 1controller type configured to cu s tomer s pecification 2(3)Input s 888999==input s configurable 1input s configured to cu s tomer s pecification 2(4)Output s000=S tandardType 702040/41Type 702042/43/44Output 1relay (n.o. ma k e)relay (n.o. ma k e)Output 2logic 0/5V , optionally configurable a s logic input logic 0/5V Output 3not available relay (n.o. ma k e)Option sType 702040/41Type 702042/43/44113=Output 2(output s 1+3 a s for S tandard)logic 0/12V , optionally configurable a s logic input logic 0/12V 101=Output 2(output 1 a s for S tandard)relay (n.o. ma k e)(logic input i s alway s available)not po ss ible(5)Supply162523===10—18V DC20—30V AC/DC 48—63Hz110—240V AC -15/+10% 48—63Hz (6)Extra code069=UL and C S A approval 210=Timer function220=Timer function + limit s witch 3Delivery package ex-factory for Type 702040/41Type 702042/43/441 mounting frame2 mounting brac k et s1 s eal, 1 Operating In s truction s 70.20401. s ingle-s etpoint with limit comparator, s ee factory s etting s under configuration and parameter level2. s ee extra order code s (below) or factory s etting s under configuration and parameter level3. The linearization s for K TY11-6 and thermocouple B have been deletedController typeOutput 1Output 2 and 310=s ingle s etpoint rever s ed 1controller limit comparator/timer s ignalling 11=s ingle s etpoint direct 2controllerlimit comparator/timer s ignalling 30=double s etpoint controller rever s edcontroller direct 20=s ingle s etpoint rever s ed 1limit comparator/timer s ignalling controller 21=s ingle s etpoint direct 2limit comparator/timer s ignalling controller33=double s etpointcontroller directcontroller rever s ed1. controller output i s active when proce ss value i s below s etpoint, e. g. heating2. controller output i s active when proce ss value i s above s etpoint, e. g. cooling001=Pt1003-wire 040=Fe-Con J 045=Pt13 Rh-Pt R 063=0—10V 003=Pt1002-wire041=Cu-Con U 046=Pt30 Rh-PtRh B 071=2—10V 005=Pt1000 2-wire 042=Fe-Con L 048=NiCr S i-Ni S i N601=K TY11-6 (PTC)006=Pt1000 3-wire 043=NiCr-Ni K 052=0—20mA 039=Cu-Con T044=Pt10Rh-PtS053=4—20mA= factory-s et。

Data Sheet 909710 (909721)Page 1/6Screw-in and weld-in pockets■for thermocouples and RTD temperature probes■thermometers can be replaced without draining the system ■pockets in different materials ■operating pressure up to 450 bar■available with acceptance certificate 3.1(machined from solid)Screw-in and weld-in pockets are used for installing thermocouples and RTD temperature probes whenever replacement without draining the system and/or pressure resistance are re-quired.The dimensions specified for EL refer to the fitting lengths of the thermometers; the dimension L indicates the fitting length of the pocket.The pressure resistance is dependent on the temperature and is specified for each item. The maximum pressure that can be sealed on the thread depends on the installation conditions and may be lower. The pressure specifications contain no safety margin for additional loading through flow velocity.Calculations of the permitted pressure under given conditions of flow, temperature and medium can be provided as a service to the user. Acceptance test certificate:3.1, can be requested when ordering.Further sheaths, data sheet 902440Technical dataProcess connection for screwing in: G 1/2 (1/2" pipe), G 3/4 (3/4" pipe)for welding in: dia. 24H7, dia. 30H11SheathMaterial:steel 1.0305stainless steel 1.4571steel 1.7335others on requestOperating temperature rangeup to 450°C, take note of loading diagrams!Data Sheet 909710 (909721)Page 2/6DimensionsBasic type 909710/10Basic type 909710/11Basic type 909712/15Basic type 909712/50Basic type 909712/51Data Sheet 909710 (909721)Page 3/6Loading diagramsLoad limits on sheaths, for various sheath dimensionsThe diagram shows the load limits (guide values) for different sheath dimensions. The ma-ximum pressure loading of cylindrical sheaths is shown in relation to the wall thickness with different sheath diameters. The data refer to sheaths in stainless steel 1.4571, fitting length 100mm, flow velocity 10m/sec in air or 4m/sec in water and a temperature range from -20 to +100°C. A safety factor of 1.8 has been taken into account. For higher temperatures, or different materials, the maximum pressure loading has to be reduced by the percentage valu-es given in the table.Loading of sheathsForm D according to 43763Basic type 909712/50 and /51Sheath: st. steel X6 CrNiMoTi 17 12 2,Material Ref. 1.4571Sheaths D1 and D4:Permissible flow velocity forair, water, superhtd. steam: up to 60m/sec Sheaths D2 and D5:Permissible flow velocity for air: up to 60m/secfor water, superheated steam: up to 30m/secLoading on sheathsForm D according to 43763Basic type 909712/50 and /51Sheath: steel 13 CrMo 44,Material Ref. 1.7335Permissible flow velocity forair and superheated steam: up to 60m/sec Loading in water: up to 450 bar and up to 5m/sec Wall thickness in mmP r e s s u r e l o a d i n g i n b a rMaterial Temperature ReductionCrNi 1.4571up to +200°C -10%CrNi 1.4571up to +300°C -20%CrNi 1.4571up to +400°C -25%CrNi 1.4571up to +500°C -30%CuZn 2.0401up to +100°C -15%CuZn 2.0401up to +175°C-60%Data Sheet 909710 (909721)Page 4/6Order details: Screw-in pockets(1)Basic type909710/10Screw-in pocket, cylindrical,with female thread G 1/2 (1/2" pipe)(similar according to 16179 Form D)909710/11Screw-in pocket, cylindrical,with female thread G 1/2 (1/2" pipe)(DIN 16179 Form D)(2)Operating temperature in °C (also see loading diagram)x x 8480 to 400°C (3)Sheath diameter D in mm x 8outside diameter 8 mm/inside diameter 6.2 mm x 13outside diameter 13 mm/inside diameter 11 mm (4)Fitting length EL in mmx x 100100mm x 150150mm x 160160mm x x 250250mm(5)Process connectionx x 104screw fitting G 1/2 (1/2" pipe thread)(6)Sheath material x x 26stainless steel 1.4571 (max. 400°C)(7)Extra codes x x000none(1)(2)(3)(4)(5)(6)(7)Order code -----/Order example909710/10-848-8-100-104-26/000Data Sheet 909710 (909721)Page 5/6Order details: Weld-in pockets(1)Basic type909712/15Weld-in pocket, tapered,with male thread G 3/4 (3/4" pipe)and acceptance test certificate 3.1 material 909712/20Weld-in pocket, tapered,with female thread G 1/2 (1/2" pipe)(DIN 16179 Form S)909712/50Weld-in pocket,with female thread M 18x1.5(DIN 43763 Form D1/D2)909712/51Weld-in pocket,with female thread M 18x1.5(DIN 43763 Form D4/D5)(2)Operating temperature in °C (also see loading diagram)x x x x 8480 to 400°C x x x 8540 to 500°C(3)Sheath diameter D in mm x12outside diameter 12mm stepped down to 8mm/inside diameter 6.5mm x x 24outside diameter 24mm stepped down to 12.5mm/inside diameter 7mm x 25outside diameter 25 mm stepped down to 17mm/inside diameter 11mm(4)Fitting length EL in mmx 65 (140)65mm (L = 140mm)1 (Form D1)x65 (200)65 mm (L = 200mm) (Form D4)x100100 mmx 1235 (200)125 mm (L = 200mm) (Form D2)x125 (260)125 mm (L = 260mm) (Form D5)x x 160160 mm x 190190 mm x 220220 mm x 250250 mm (5)Process connectionx x x x 000weld-in pocket(6)Sheath materialx 03steel 1.0305x x x 26stainless steel 1.4571 (max. 400 °C)x x x 36steel 1.7335 (max. 500°C)(7)Extra codes x x x 000none x x x374acceptance test certificate 3.1 material(1)(2)(3)(4)(5)(6)(7)Order code -----/Order example909712/15-848-12-100-000-03/3741Example: 65mm (L = 140mm); 65mm = EL taper, 140mm = L pocket.Data Sheet 909710 (909721)Page 6/6Stock versions(1)(2)(3)(4)(5)(6)(7)Part No.909710/10-848-8-100-104-26/00090/00489140909710/10-848-8-150-104-26/00090/00489141909710/10-848-8-250-104-26/00090/00531795909710/11-848-13-100-104-26/00090/00044862909710/11-848-13-160-104-26/00090/00044863909710/11-848-13-250-104-26/00090/00044864909712/15-848-12-100-000-03/00090/00039349909712/15-848-12-160-000-03/00090/00032010909712/15-848-12-190-000-03/00090/00038739909712/15-848-12-220-000-03/00090/00035520909712/20-848-25-160-000-26/00090/00045048909712/20-848-25-250-000-26/00090/00045049909712/20-854-25-160-000-36/00090/00045411909712/20-854-25-250-000-36/00090/00045412909712/50-848-24- 65 (140)-000-26/00090/00348538909712/50-848-24-125 (200)-000-26/00090/00340509909712/51-848-24- 65 (200)-000-26/00090/00340384909712/51-848-24-125 (260)-000-26/00090/00348540909712/50-854-24- 65 (140)-000-36/00090/00348539909712/50-854-24-125 (200)-000-36/00090/00317838909712/51-854-24- 65 (200)-000-36/00090/00102673909712/51-854-24-125 (260)-000-36/00090/00340381。

Data Sheet 902006Page 1/12RTD Temperature Probefor Device s and Plant s Te s ted/In s pected According to DIN EN 14597DIN EN 14597•For heat tran s mi ss ion plant s according to DIN 4754•For temperature s of up to 700°C•A s s ingle, double, or triple RTD temperature probe s •For water, oil, or air •For te s ted control and limitation device sThe RTD temperature probes specified in this data sheet can be used in connection with tem-perature control and limitation devices tested/inspected according to DIN EN 14597 (DIN 3440)in heat transmission plants according to DIN 4754.RTD temperature probes are the preferred choice for measuring temperatures in liquids and gases. Application areas include air conditioning and refrigeration technology as well as heat-ing, furnace/kiln, and apparatus engineering.Form B terminal heads are suitable for ambient temperatures up to 100°C.Protection tubes made of various materials protect the measuring insert against chemical influ-ences and mechanical damage. The appropriate protection tube material is selected according to the conditions on site.A Pt100 temperature sensor according to DIN EN 60751, classB is used in the measuring insert in a 2-wire-circuit as standard.Change s to the de s cribed ver s ion s require new de s ign approval.Important information: state the part no. from price sheet 902006 when ordering!Data Sheet902006Page 2/12 Dimen s ion sPo s. 1Po s. 2Po s. 3Po s. 4Po s. 5Po s. 6Data Sheet 902006Page 3/12In s ertion length EL in mmNominal length NL in mm Thread G in inche sTemperaturerange in °CType up to February 28, 20131× Pt100Type up to February 28, 20132× Pt100Typea s of March 01, 2013Order codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457165to 670710G 1/2-170to +55090.272-F03-902006/54-227-1003-1-15-710-254/00065to 670710G 1/2-170to +550-90.272-F02902006/54-227-2003-1-15-710-254/000Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating media: water and oilOperating pressure: max. 27bar up to 100°C, 20bar up to 400°C, pressureless as of 400°CPos. 1Versions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length EL in mmNominal length NL in mm Thread G in inche s Temperaturerange in °C1× Pt1002× Pt100TypeOrder codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457165to 670710G 1/2-170to +550x -902006/54-227-1003-1-15-710-254/92265to 670710G 1/2-170to +550-x902006/54-227-2003-1-15-710-254/922Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating media: water and oilOperating pressure: max. 27bar up to 100°C, 20bar up to 400°C, pressureless as of 400°CPos. 1Data Sheet 902006Page 4/12In s ertion length EL in mmThread G in inche sTemperature range in °CTypeup to February 28, 20131× Pt100Typeup to February 28, 20132× Pt100Typea s of March 01, 2013Order codeSteel protection tube St 35.8, material-no. 1.0305250G 1/2-170to +48090.239 ●-902006/10-226-1003-1-9-250-104/000 ●250G 1/2-170to +480-90D239902006/10-226-2003-1-9-250-104/000Stainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.4571100G 1/2-40to +400902006/10-402-1003-902006/10-402-1003-1-9-100-104/000150G 1/2-40to +400x -902006/10-402-1003-1-9-150-104/000200G 1/2-40to +400x -902006/10-402-1003-1-9-200-104/000100G 1/2-40to +400-902006/10-402-2003902006/10-402-2003-1-9-100-104/000150G 1/2-40to +400-x 902006/10-402-2003-1-9-150-104/000200G 1/2-40to +400-x902006/10-402-2003-1-9-200-104/000Operating media: water and oilOperating pressure: max. 35bar up to 100°C, 20bar up to 400°C, pressureless as of 400°C ● Available from stock.Pos. 2Versions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length EL in mmThread G in inche s Temperature range in °C1× Pt1002× Pt100TypeOrder codeSteel protection tube St 35.8, material-no. 1.0305250G 1/2-170to +480x -902006/10-226-1003-1-9-250-104/922250G 1/2-170to +480-x 902006/10-226-2003-1-9-250-104/922Stainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.4571100G 1/2-40to +400x -902006/10-402-1003-1-9-100-104/922150G 1/2-40to +400x -902006/10-402-1003-1-9-150-104/922200G 1/2-40to +400x -902006/10-402-1003-1-9-200-104/922100G 1/2-40to +400-x 902006/10-402-2003-1-9-100-104/922150G 1/2-40to +400-x 902006/10-402-2003-1-9-150-104/922200G 1/2-40to +400-x902006/10-402-2003-1-9-200-104/922Operating media: water and oilOperating pressure: max. 35bar up to 100°C, 20bar up to 400°C, pressureless as of 400°CData Sheet 902006Page 5/12In s ertion length a EL in mmLength L in mm Length L1in mm Temperature range in °C Type up to February 28, 20131× Pt100Type up to February28, 20132× Pt100Type up to February 28, 20133× Pt100Typea s of March 01, 2013Order codeSteel welding s houlder 15 Mo 3, material-no. 1.5415Steel protection tube St 35.8, material-no. 1.03051008096-40to +48090.239-F01--902006/53-507-1003-1-12-100-815/00016014096-40to +48090.239-F11--902006/53-507-1003-1-12-160-815/000190170146-40to +40090.239-F03--902006/53-505-1003-1-12-190-815/00022020096-40to +48090.239-F21 ●--902006/53-507-1003-1-12-220-815/000 ●1008096-40to +480-90.239-F02 ●-902006/53-507-2003-1-12-100-815/000 ●16014096-40to +480-90.239-F12-902006/53-507-2003-1-12-160-815/000190170146-40to +400-90D239-F03 ●-902006/53-505-2003-1-12-190-815/000 ●22020096-40to +480-902006/53-507-2003 ●-902006/53-507-2003-1-12-220-815/000 ●1008096-40to +400--90.239-F07902006/53-505-3003-1-12-100-815/00016014096-40to +400--90.239-F17902006/53-505-3003-1-12-160-815/00022020096-40to +400--90.239-F27902006/53-505-3003-1-12-220-815/000Operating media: water and oilOperating pressure: max. 103bar up to 100°C, 30bar up to 480°C ● Available from stock.Pos. 3aInsertion length of the RTD temperature probeVersions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length a EL in mmLength L in mm Length L1in mm Temperature range in °C1× Pt1002× Pt1003× Pt100TypeOrder codeSteel welding s houlder 15 Mo 3, material-no. 1.5415Steel protection tube St 35.8, material-no. 1.03051008096-40to +480x --902006/53-507-1003-1-12-100-815/92216014096-40to +480x --902006/53-507-1003-1-12-160-815/922190170146-40to +400x --902006/53-505-1003-1-12-190-815/92222020096-40to +480x --902006/53-507-1003-1-12-220-815/9221008096-40to +480-x -902006/53-507-2003-1-12-100-815/92216014096-40to +480-x -902006/53-507-2003-1-12-160-815/922190170146-40to +400-x -902006/53-505-2003-1-12-190-815/92222020096-40to +480-x -902006/53-507-2003-1-12-220-815/9221008096-40to +400--x 902006/53-505-3003-1-12-100-815/92216014096-40to +400--x 902006/53-505-3003-1-12-160-815/92222020096-40to +400--x 902006/53-505-3003-1-12-220-815/922Operating media: water and oilOperating pressure: max. 103bar up to 100°C, 30bar up to 480°CData Sheet 902006Page 6/12In s ertion length a EL in mmaInsertion length of the RTD temperature probeLength L in mmTemperature range in °CTypeup to February 28, 20131× Pt100Typea s of March 01, 2013Order codeSteel welding s houlder 15 Mo 3, material-no. 1.5415Steel protection tube St 35.8, material-no. 1.030510080-170to +48090.280-F32902006/40-226-1003-1-12-100-815/000160140-170to +48090.280-F31902006/40-226-1003-1-12-160-815/000220200-170to +48090.280-F30902006/40-226-1003-1-12-220-815/000Operating media: water and oilOperating pressure: max. 103bar up to 100°C, 30bar up to 480°CPos. 4Versions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length a EL in mmaInsertion length of the RTD temperature probeLength L in mm Temperature range in °C1× Pt100TypeOrder codeSteel welding s houlder 15 Mo 3, material-no. 1.5415Steel protection tube St 35.8, material-no. 1.030510080-170to +480x 902006/40-226-1003-1-12-100-815/922160140-170to +480x 902006/40-226-1003-1-12-160-815/922220200-170to +480x902006/40-226-1003-1-12-220-815/922Operating media: water and oilOperating pressure: max. 103bar up to 100°C, 30 bar up to 480°CPos. 4Data Sheet 902006Page 7/12Pu s h-in RTD temperature probeIn s ertion length EL in mmNominal length NL in mmTemperature range in °CType up to February 28, 20131× Pt100Type up to February 28, 20132× Pt100Typea s of March 01, 2013Order codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457150to 460500-170to +700x -902006/65-228-1003-1-15-500-668/00050to 670710-170to +700x -902006/65-228-1003-1-15-710-668/00050to 9601000-170to +700x -902006/65-228-1003-1-15-1000-668/00050to 460500-170to +700-90.271-F01902006/65-228-2003-1-15-500-668/000 ●50to 670710-170to +700-90.272-F01902006/65-228-2003-1-15-710-668/00050to 9601000-170to +700-90.273-F01902006/65-228-2003-1-15-1000-668/000Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating medium: air●Available from stock. Pos. 5Versions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length EL in mmNominal length NL in mm Temperature range in °C1× Pt1002× Pt100TypeOrder codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457150to 460500-170to +700x -902006/65-228-1003-1-15-500-668/92250to 670710-170to +700x -902006/65-228-1003-1-15-710-668/92250to 9601000-170to +700x -902006/65-228-1003-1-15-1000-668/92250to 460500-170to +700-x 902006/65-228-2003-1-15-500-668/92250to 670710-170to +700-x 902006/65-228-2003-1-15-710-668/92250to 9601000-170to +700-x902006/65-228-2003-1-15-1000-668/922Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating medium: airData Sheet 902006Page 8/12In s ertion length EL in mmThread G in inche sNominal length NL in mm Temperature range in °CType up to February 28, 20131× Pt100Type up to February 28, 20132× Pt100Typea s of March 01, 2013Order codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457150to 460G 1/2500-170to +700x -902006/55-228-1003-1-15-500-254/00050to 670G 1/2710-170to +700x -902006/55-228-1003-1-15-710-254/00050to 960G 1/21000-170to +700x -902006/55-228-1003-1-15-1000-254/00050to 460G 1/2500-170to +700-x 902006/55-228-2003-1-15-500-254/000 ●50to 670G 1/2710-170to +700-x 902006/55-228-2003-1-15-710-254/00050to 960G 1/21000-170to +700-x902006/55-228-2003-1-15-1000-254/000Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating medium: air ● Available from stock.Pos. 6Versions only for connecting aJUMO safetyM STB/STW Ex type 701155In s ertion length EL in mmThread G in inche s Nominal length NL in mm Temperature range in °C1× Pt1002× Pt100TypeOrder codeStainle ss s teel protection tube X 6 CrNiMoTi 17 12 2, material-no. 1.457150to 460G 1/2500-170to +700x -902006/55-228-1003-1-15-500-254/92250to 670G 1/2710-170to +700x -902006/55-228-1003-1-15-710-254/92250to 960G 1/21000-170to +700x -902006/55-228-1003-1-15-1000-254/92250to 460G 1/2500-170to +700-x 902006/55-228-2003-1-15-500-254/92250to 670G 1/2710-170to +700-x 902006/55-228-2003-1-15-710-254/92250to 960G 1/21000-170to +700-x902006/55-228-2003-1-15-1000-254/922Important information:Please observe the internal lead wire resistance with respect to the operating temperature;see the final page for the resistance values.Operating medium: airData Sheet 902006Page 9/12Allocation li s t of temperature probe s to the re s pective JUMO device sFor connection to...JUMO s afetyM STB/STW type 701150The temperature probes are suitable for use according to DIN EN 14597.Based on the test report from TÜV-Nord no. SAS-110-2006TB-2.Temperature probe s for airTemperature probe s for water and oilTypea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/65-228-1003-1-15-500-668/000-1× Pt100-170to +700-902006/65-228-1003-1-15-710-668/000-1× Pt100-170to +700-902006/65-228-1003-1-15-1000-668/000-1× Pt100-170to +700-902006/65-228-2003-1-15-500-668/00090.271-F012× Pt100-170to +700-902006/65-228-2003-1-15-710-668/00090.272-F012× Pt100-170to +700-902006/65-228-2003-1-15-1000-668/00090.273-F012× Pt100-170to +700-902006/55-228-1003-1-15-500-254/000-1× Pt100-170to +700-902006/55-228-1003-1-15-710-254/000-1× Pt100-170to +700-902006/55-228-1003-1-15-1000-254/000-1× Pt100-170to +700-902006/55-228-2003-1-15-500-254/000-2× Pt100-170to +700-902006/55-228-2003-1-15-710-254/000-2× Pt100-170to +700-902006/55-228-2003-1-15-1000-254/000-2× Pt100-170to +700-Typea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/54-227-1003-1-15-710-254/00090.272-F031× Pt100-170to +550-902006/54-227-2003-1-15-710-254/00090.272-F022× Pt100-170to +550-902006/10-226-1003-1-9-250-104/00090.2391× Pt100-170to +480-902006/10-226-2003-1-9-250-104/00090D2392× Pt100-170to +480-902006/10-402-1003-1-9-100-104/000902006/10-402-10031× Pt100-40to +400-902006/10-402-1003-1-9-150-104/000-1× Pt100-40to +400-902006/10-402-1003-1-9-200-104/000-1× Pt100-40to +400-902006/10-402-2003-1-9-100-104/000902006/10-402-20032× Pt100-40to +400-902006/10-402-2003-1-9-150-104/000-2× Pt100-40to +400-902006/10-402-2003-1-9-200-104/000-2× Pt100-40to +400-902006/53-507-1003-1-12-100-815/00090.239-F011× Pt100-40to +480x 902006/53-507-1003-1-12-160-815/00090.239-F111× Pt100-40to +480x 902006/53-505-1003-1-12-190-815/00090.239-F031× Pt100-40to +400x 902006/53-507-1003-1-12-220-815/00090.239-F211× Pt100-40to +480x 902006/53-507-2003-1-12-100-815/00090.239-F022× Pt100-40to +480x 902006/53-507-2003-1-12-160-815/00090.239-F122× Pt100-40to +480x 902006/53-505-2003-1-12-190-815/00090D239-F032× Pt100-40to +400x 902006/53-507-2003-1-12-220-815/000902006/53-507-20032× Pt100-40to +480x 902006/53-505-3003-1-12-100-815/00090.239-F073× Pt100-40to +400x 902006/53-505-3003-1-12-160-815/00090.239-F173× Pt100-40to +400x 902006/53-505-3003-1-12-220-815/00090.239-F273× Pt100-40to +400x 902006/40-226-1003-1-12-100-815/00090.280-F321× Pt100-170to +480xData Sheet 902006Page 10/12For connection to...JUMO s afetyM TB/TW type 701160JUMO s afetyM TB/TW 08 type 701170JUMO DICON 500 type 703570JUMO DICON 501 type 703580The temperature probes are suitable for use according to DIN EN 14597.Based on the test report from TÜV-Süd no. C-T 1487-00/12.Temperature probe s for airTemperature probe s for water and oilTypea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/65-228-1003-1-15-500-668/000-1× Pt100-170to +700-902006/65-228-1003-1-15-710-668/000-1× Pt100-170to +700-902006/65-228-1003-1-15-1000-668/000-1× Pt100-170to +700-902006/65-228-2003-1-15-500-668/00090.271-F012× Pt100-170to +700-902006/65-228-2003-1-15-710-668/00090.272-F012× Pt100-170to +700-902006/65-228-2003-1-15-1000-668/00090.273-F012× Pt100-170to +700-902006/55-228-1003-1-15-500-254/000-1× Pt100-170to +700-902006/55-228-1003-1-15-710-254/000-1× Pt100-170to +700-902006/55-228-1003-1-15-1000-254/000-1× Pt100-170to +700-902006/55-228-2003-1-15-500-254/000-2× Pt100-170to +700-902006/55-228-2003-1-15-710-254/000-2× Pt100-170to +700-902006/55-228-2003-1-15-1000-254/000-2× Pt100-170to +700-Typea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/54-227-1003-1-15-710-254/00090.272-F031× Pt100-170to +550-902006/54-227-2003-1-15-710-254/00090.272-F022× Pt100-170to +700-902006/10-226-1003-1-9-250-104/00090.2391× Pt100-170to +480-902006/10-226-2003-1-9-250-104/00090D2392× Pt100-170to +480-902006/10-402-1003-1-9-100-104/000902006/10-402-10031× Pt100-40to +400-902006/10-402-1003-1-9-150-104/000-1× Pt100-40to +400-902006/10-402-1003-1-9-200-104/000-1× Pt100-40to +400-902006/10-402-2003-1-9-100-104/000902006/10-402-20032× Pt100-40to +400-902006/10-402-2003-1-9-150-104/000-2× Pt100-40to +400-902006/10-402-2003-1-9-200-104/000-2× Pt100-40to +400-902006/53-507-1003-1-12-100-815/00090.239-F011× Pt100-40to +480x 902006/53-507-1003-1-12-160-815/00090.239-F111× Pt100-40to +480x 902006/53-505-1003-1-12-190-815/00090.239-F031× Pt100-40to +400x 902006/53-507-1003-1-12-220-815/00090.239-F211× Pt100-40to +480x 902006/53-507-2003-1-12-100-815/00090.239-F022× Pt100-40to +480x 902006/53-507-2003-1-12-160-815/00090.239-F122× Pt100-40to +480x 902006/53-505-2003-1-12-190-815/00090D239-F032× Pt100-40to +400x 902006/53-507-2003-1-12-220-815/000902006/53-507-20032× Pt100-40to +480x 902006/53-505-2003-1-12-100-815/00090.239-F073× Pt100-40to +400x 902006/53-505-3003-1-12-160-815/00090.239-F173× Pt100-40to +400x 902006/53-505-3003-1-12-220-815/00090.239-F273× Pt100-40to +400x 902006/40-226-1003-1-12-100-815/00090.280-F321× Pt100-170to +480xData Sheet 902006Page 11/12For connection to...JUMO s afetyM STB/STW Ex type 701155The temperature probes are suitable for use in potentially explosive areas according to DIN EN 14597.Based on the test report from TÜV-Nord no. 12 203 556139.Temperature probe s for airTemperature probe s for water and oilTypea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/65-228-1003-1-15-500-668/922-1× Pt100-170to +700-902006/65-228-1003-1-15-710-668/922-1× Pt100-170to +700-902006/65-228-1003-1-15-1000-668/922-1× Pt100-170to +700-902006/65-228-2003-1-15-500-668/92290.271-F012× Pt100-170to +700-902006/65-228-2003-1-15-710-668/92290.272-F012× Pt100-170to +700-902006/65-228-2003-1-15-1000-668/92290.273-F012× Pt100-170to +700-902006/55-228-1003-1-15-500-254/922-1× Pt100-170to +700-902006/55-228-1003-1-15-710-254/922-1× Pt100-170to +700-902006/55-228-1003-1-15-1000-254/922-1× Pt100-170to +700-902006/55-228-2003-1-15-500-254/922-2× Pt100-170to +700-902006/55-228-2003-1-15-710-254/922-2× Pt100-170to +700-902006/55-228-2003-1-15-1000-254/922-1× Pt100-170to +700-Typea s of March 01, 2013Order codeTypeup to February 28, 2013Mea s uring probe Temperature range in °C Weld-in s leeve902006/54-227-1003-1-15-710-254/92290.272-F031× Pt100-170to +550-902006/54-227-2003-1-15-710-254/92290.272-F022× Pt100-170to +700-902006/10-226-1003-1-9-250-104/92290.2391× Pt100-170to +480-902006/10-226-2003-1-9-250-104/92290D2392× Pt100-170to +480-902006/10-402-1003-1-9-100-104/922902006/10-402-10031× Pt100-40to +400-902006/10-402-1003-1-9-150-104/922-1× Pt100-40to +400-902006/10-402-1003-1-9-200-104/922-1× Pt100-40to +400-902006/10-402-2003-1-9-100-104/922902006/10-402-20032× Pt100-40to +400-902006/10-402-2003-1-9-150-104/922-2× Pt100-40to +400-902006/10-402-2003-1-9-200-104/922-2× Pt100-40to +400-902006/53-507-1003-1-12-100-815/92290.239-F011× Pt100-40to +480x 902006/53-507-1003-1-12-160-815/92290.239-F111× Pt100-40to +480x 902006/53-505-1003-1-12-190-815/92290.239-F031× Pt100-40to +400x 902006/53-507-1003-1-12-220-815/92290.239-F211× Pt100-40to +480x 902006/53-507-2003-1-12-100-815/92290.239-F022× Pt100-40to +480x 902006/53-507-2003-1-12-160-815/92290.239-F122× Pt100-40to +480x 902006/53-505-2003-1-12-190-815/92290D239-F032× Pt100-40to +400x 902006/53-507-2003-1-12-220-815/922902006/53-507-20032× Pt100-40to +480x 902006/53-505-3003-1-12-100-815/92290.239-F073× Pt100-40to +400x 902006/53-505-3003-1-12-160-815/92290.239-F173× Pt100-40to +400x 902006/53-505-3003-1-12-220-815/92290.239-F273× Pt100-40to +400x 902006/40-226-1003-1-12-100-815/92290.280-F321× Pt100-170to +480x 902006/40-226-1003-1-12-160-815/92290.280-F311× Pt100-170to +480x 902006/40-226-1003-1-12-220-815/92290.280-F301× Pt100-170to +480xData Sheet 902006Page 12/12Temperature error sThe internal lead wire causes a systematic measure-ment error in the versions 902006/54 and 902006/65.This depends on both the nominal length (NL) as well as the measured temperature. In the table, the error is shown per 100mm in s ertion length (EL) depending on the temperature measurement.Lead wire resistance of a 0.5mm NiCr wire per 100mm in s ertion length (EL) (double wire length).The specifications are to be viewed as reference values.L e a d w i r e r e s i s t a n c e R /ΩM e a s u r e m e n t e r r o r Δt /KMeasured temperature t/°C_______ Resistance --------- Temperaturet/°C R/ΩΔt/K 00.73 1.871000.75 1.982000.77 2.093000.79 2.224000.81 2.355000.83 2.496000.85 2.647000.87 2.808000.892.98。

Data Sheet 90.2120 (90.2102)Page 1/5Push-in RTD temperature probes with terminal head form B■For temperatures from -50to +600°C ■with replaceable measuring insert■As single or double RTD temperature probes ■Connection head form B, BUZ, BUZH, BBK ■Available with transmitterPush-in RTD temperature probes are preferentially used for measuring temperatures in liquids and gasses. Application areas encompass, among others, the air conditioning technology and refrigeration engineering, as well as the heating system, kiln and apparatus engineering sector,and in process technology.The connection head is suitable for ambient temperatures up to +100C. The versions BUZ,BUZH and BBK are also available in addition to the standard connection head, form B.The measuring insert is normally fitted with a Pt100 temperature probe as per DIN EN 60751,class B in 2-wire circuit, versions with Pt500 or Pt1000 are also possible. Connection is available in 3-wire or 4-wire-circuitry as an option. A transmitter can be optionally integrated into the connection head.Technical dataTerminal headForm B DIN 43729, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40to +100°C Form BUZ, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40to +100°C Form BUZH, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40to+100°C Form BBK, plastic, M 20x1.5; IP54, ambient temperature -30to +130°C Caution: reduced ambient temperature range when using transmitters,data sheets 70.7010, 70.7030 and 70.7060Process connectionSheet steel flange Ø9mm, Ø11mm, galvanized steel Stop flange Ø15mm, DIN 43734, gray cast ironPipe screw-connection Ø12mm, Ø15mm, stainless steel SheathStainless steel 1.4571, Ø9mm, Ø11mm, Ø 15mmMeasuring insert Replaceable, Pt100 temperature probe, DIN EN 60751, class B, 2-wire circuit Transmitteranalog transmitter, 4to 20mA output, data sheet 70.7030analog transmitter, 0to 10V output, data sheet 70.7030programmable transmitter, 4to 20mA/20to 4mA output, data sheet 70.7010Wtrans B programmable head transducer with radio transmission, data sheet 70.7060(suitable Wtrans receivers, data sheet 90.2931)Data Sheet 90.2120 (90.2102)Page 2/5DimensionsBasic type 902120/10Basic type 902120/11Data Sheet 90.2120 (90.2102)Page 3/5Order specifications:Push-in RTD temperature probe with connection head form B(1)Basic type902120/10Push-in RTD temperature probes with continuous sheath(2)Operating temperature in °Cx150-200to+600°Cx402-50to+400°C (standard)x415-50to+600°C(3)Measuring insertx10011x Pt100 in 3-wire-circuitx10031x Pt100 in 2-wire circuitx10111x Pt100 in 4-wire circuitx20012x Pt100 in 3-wire circuitx20032x Pt100 in 2-wire circuit(4)Tolerance class as per DIN EN 60751x1Class B (standard)x2Class A(5)Sheath diameter D in mmx9Ø9mmx11Ø11mmx15Ø15mm(6)Nominal length NL in mm (100≤ΝΛ£1000) x180180mm, fitting length (EL) 100to140mm x270270mm, fitting length (EL) 100to230mm x290290mm, fitting length (EL) 100to250mm x350350mm, fitting length (EL) 100to310mm x410410mm, fitting length (EL) 100to370mm x420420mm, fitting length (EL) 100to400mmx500500mm, fitting length (EL) 100to460mmx710710mm, fitting length (EL) 100to670mmx10001000mm, fitting length (EL) 100to960mmx...Specification in plain text (50mm steps)(7)Process connectionx000without process connectionx254Sheath screw connection G1/2 (for a 15mm diameteronly)x663Sheet steel flange Ø 9mmx665Sheet steel flange Ø 11mmx668Stop flange Ø 15mm, DIN 43734(8)Extra codesx000no extra codex320terminal head Form BUZx321terminal head Form BUZHx322Connection head form BBKx3301x analog transmitter, 4to20mA2 output, data sheet 70.7030x3311x transmitter programmable output 4to20mA/20to4mA3, data sheet 70.7010x3331x analog transmitter, 0to10V2 output, data sheet 70.7030x3342x analog transmitters, 4to20mA2 output, data sheet 70.7030x3352x transmitter programmable output 4to20mA/20to4mA3, data sheet 70.7010x3372x analog transmitters, 0to10V2 output, data sheet 70.7030x8591x Wtrans B programmable head transducer with radio transmission, data sheet 70.7060(1)(2)(3)(4)(5)(6)(7)(8)Order code------/, (1)Order example902120/10-402-1001-1-9-410-663/000Data Sheet 90.2120 (90.2102)Page 4/5Order specifications:Push-in RTD temperature probe with connection head form B(1)Basic type902120/11Push-in RTD temperature probes with stepped sheath(2)Operating temperature in °Cx150-200to+600°Cx402-50to+400°C (standard)x415-50to+600°C(3)Measuring insertx10011x Pt100 in 3-wire-circuitx10031x Pt100 in 2-wire circuitx10111x Pt100 in 4-wire circuitx20012x Pt100 in 3-wire circuitx20032x Pt100 in 2-wire circuit(4)Tolerance class as per DIN EN 60751x1Class B (standard)x2Class A(5)Sheath diameter D in mmx12Ø12mm stepped down to 9mm(6)Nominal length NL in mm (100≤ΝΛ£700) x180180mm, fitting length (EL) 100to140mm x270270mm, fitting length (EL) 100to230mm x290290mm, fitting length (EL) 100to250mm x350350mm, fitting length (EL) 100to310mm x410410mm, fitting length (EL) 100to370mm x500500mm, fitting length (EL) 100to460mm x...Specification in plain text (50mm steps)(7)Process connectionx000without process connectionx254Sheath screw-connection G1/2(8)Extra codesx000no extra codex320terminal head Form BUZx321terminal head Form BUZHx322Connection head form BBKx3301x analog transmitter, 4to20mA2 output, data sheet 70.7030x3311x transmitter programmable output 4to20mA/20to4mA3, data sheet 70.7010x3331x analog transmitter, 0to10V2 output, data sheet 70.7030x3342x analog transmitters, 4to20mA2 output, data sheet 70.7030x3352x transmitter programmable output 4to20mA/20to4mA3, data sheet 70.7010x3372x analog transmitters, 0to10V2 output, data sheet 70.7030x8591x Wtrans B programmable head transducer with radio transmission, data sheet 70.7060(1)(2)(3)(4)(5)(6)(7)(8)Order code------/, (1)Order example902120/11-402-1001-1-12-410-000/000Data Sheet 90.2120 (90.2102)Page 5/5Accessories for programmable 2-wire transmitter type 707010in the accessories data sheet 70.9770Accessories for Wtrans B, programmable head transmitter with radio transmission Type 707060Stock versions(1)(2)(3)(4)(5)(6)(7)(8)Sales No.:902120/10-415-1003-1-15-500-668/00090/00055514902120/10-402-1003-1-11-180-665/00090/00055681PartSales No.:PC interface with TTL/RS232 converter and adapter (socket connector)70/00350260PC interface with USB/TTL converter, adapter (socket connector) and adapter (pins)70/00456352Special programming (standard measuring range 0to 100°C)-Setup program on CD-ROM, multilingual70/00378733PartSales No.:Lithium battery 3.6V, 2.2Ah (size AA)70/00547559PC interface with USB/TTL converter, adapter (socket) and adapter (pins)70/00456352PC interface with TTL/RS232 converter and adapter (socket connector)70/00350260Setup program on CD-ROM, multilingual70/00488887Setup program including OnlineChart on CD-ROM, multilingual 70/00549067OnlineChart activation70/00549188。

Page 1/4Fax:+49 661 6003-607e-mail:Internet: Fax:+44 1279 635262e-mail:Internet: Fax:315-697-5867e-mail:Internet:Screw-in RTD temperature probewith terminal head form J■For temperatures from -50 to +400°C■As single or double RTD temperature probes ■Available with transmitter ■Protection class IP65Screw-in RTD temperature probes are preferentially used for measuring temperatures in liquids and gases. A decisive selection criterion is the reliable sealing feature of this installation type with vacuum and with overpressure. The application areas are, among others, in the air conditioning technology and refrigeration engineering as well as the HVAC, kiln and apparatus engineering sector.The measuring insert is normally fitted with a Pt100 temperature sensor according to DIN EN 60751, Class B in 2-wire circuit; versions with Pt500 or Pt1000 temperature sensors can also be supplied, as well as 3- and 4-wire circuit connections. A transmitter can be optionally integrated into the connection head.Technical DataTerminal headForm J, die-cast aluminum, M 16x1.5; IP65, ambient temperature -40 to +100°C Caution: reduced ambient temperature range when using transmitters,Data Sheet 70.7030Process connection thread, stainless steel 1.4571Protection tube Stainless steel 1.4571, Ø6mm and Ø8mmMeasuring insert Pt100 temperature sensor according to DIN EN 60751, Class B, two-wire circuit Response times t 0.5 = 5 sec, t 0.9 = 14 sec, in water 0.4m/sec, 6mm dia.Transmitter Analog transmitter, output 4 to 20mA, Data sheet 70.7030AccessoriesSheath, Data Sheet 90.9710 (90.9721)Page 2/4Fax:+49 661 6003-607e-mail:*************Internet: Fax:+44 1279 635262e-mail:*************.uk Internet: Fax:315-697-5867e-mail:************Internet:DimensionsType 902030/10Type 902030/11Type 902030/31Type 902030/80Page 3/4Fax:+49 661 6003-607e-mail:*************Internet: Fax:+44 1279 635262e-mail:*************.uk Internet: Fax:315-697-5867e-mail:************Internet:Order details:Screw-in RTD temperature probe with terminal head form J(1)Basic type902030/10Screw-in RTD temperature probes with continuous sheath902030/11Screw-in RTD temperature probes with stepped sheath(with Ø6 to Ø3.8mm; with Ø8 to Ø6mm)902030/31Screw-in RTD temperature probes with stepped sheath for air measurement902030/80Screw-in RTD temperature probes with spring-loaded connection,12mm spring deflection,connection head rotatable by 360°(2)Operating temperature in °Cx x647-20 to +150°C (only in conjunction with class B and 1x Pt100/1x Pt1000 in 2-wire circuit)x378-50 to +180°C x x x380-50 to +200°C x x 386-50 to +260°C x x 402-50 to +400°C (3)Measuring insertx x x x 10011x Pt100 in 3-wire-circuit x x x x 10031x Pt100 in 2-wire circuit x x x x 10051x Pt1000 in 2-wire circuit x x x x 10111x Pt100 in 4-wire circuit x x x x20032x Pt100 in 2-wire circuit(4)Tolerance class according to EN 60751x x x x 1Class B (standard)x x x x 2Class A(5)Protection tube diameter D in mm x x x 6Ø6mm (standard)x x 8Ø8mm (6)Fitting length EL in mm (100≤EL ≤1000)x x 5050mm x x x x 100100mm x x x x 150150mm x x x x 250250mm x x x x 300300mmxx xx...Specification in plain text (50mm steps)(7)Process connection x x x 102Screw connection (thread) G 1/4x x x 103Screw connection (thread) G 3/8x x x x 104Screw connection (thread) G 1/2(8)Extra codesx x x x 000without extra codesx x x x3301x analog transmitter, 4 to 20mA 1 output, Data sheet 70.7030(1)(2)(3)(4)(5)(6)(7)(8)Order code ------/Order example902030/10-402-1001-1-6-100-104/0001Specify measuring range in plain text.Page 4/4Fax:+49 661 6003-607e-mail:*************Internet: Fax:+44 1279 635262e-mail:*************.uk Internet: Fax:315-697-5867e-mail:************Internet:Stock versions(1)(2)(3)(4)(5)(6)(7)(8)Part No.902030/10-380-2003-1-6-50-104/00090/00533450902030/10-380-2003-1-6-100-104/00090/00533451902030/10-380-2003-1-6-150-104/00090/00533452902030/10-402-1003-1-6-50-104/00090/00055692902030/10-402-1003-1-6-100-104/00090/00055693902030/10-402-1003-1-6-150-104/00090/00055694902030/10-402-1003-1-6-300-104/00090/00065691902030/10-402-1003-1-6-250-104/00090/00533433902030/10-402-2003-1-6-50-104/00090/00383011902030/10-402-2003-1-6-100-104/00090/00526429902030/10-402-2003-1-6-150-104/00090/00533442902030/10-402-1003-1-6-50-103/00090/00478984902030/10-402-1003-1-6-100-103/00090/00424045902030/10-380-1003-1-6-100-104/330(-40 to +60°C)90/00533453902030/10-647-1003-1-6-100-104/330(0 to 100°C)90/00533454902030/10-647-1003-1-6-150-104/330(0 to 100°C)90/00533468902030/10-402-1005-1-6-100-104/00090/00359611902030/10-402-1005-1-6-150-104/00090/00411610902030/10-647-1003-1-6-50-104/00090/00533448902030/10-647-1003-1-6-100-104/00090/00533449902030/10-647-1003-1-6-150-104/00090/00508957902030/31-380-1003-1-6-75-104/00090/00438406902030/31-380-1003-1-6-100-104/00090/00438408902030/31-380-1003-1-6-150-104/00090/00438409。

902810久茂JUMO温度传感器技术参数德国久茂JUMO温度传感器----食品制药行业专用热电阻902810久茂JUMO温度传感器详细说明特点:测温范围-50 -- +250° C德国久茂卫生温度变送器不锈钢保护管单支或双支型一体化温度变送器可选|符合CIP要求的安装方式接线盒:可配不锈钢接线盒、铸铝接线盒或塑料接线盒可提供满足食品和制药行业应用的各种过程连接保护管为不锈钢材质测温范围-50 -- +250° C.采用单支或双支Pt100温度传感器EN 60 751，3线制，确保高精度测量当传送距离较远时，可选内置模拟或智能的温度变送器德国久茂JUMO温度传感器----食品制药行业专用技术数据不锈钢接线盒:材质1. 4571，电连接M16x1. 5，防护等级IP67,环境温度-20 -一+100C铸铝连线盒,电连接M20x1.5，防护等级IP54 -- IP65, 环境温度-20 --+100塑料(PA 66),电连接M20x1.5，防护等级IP54,环境温度-20 -- +100°C注意:带温度变送器时允许的环境温度降低(见数据单95.6530/95. 6550)德国久茂JUMO温度传感器----食品制药行业专用延长管不锈钢，长度大约70mm， 9mm 外径过程连接符合CIP要求具有锥台密封的螺纹连接，不锈钢316 L卡箍连接，DIN 32 676，不锈钢316 L带环形螺母的锥形管接头(牛奶管接头)，DIN 11 851, 不锈钢316 L球形焊座，不锈钢316 L，聚四氟Z烯密封符合CIP的焊座，不锈钢316 L，聚四氟乙烯密封VARIENT(变径)连接，不锈钢316 L球形焊套，不锈钢316 Ti保护套管不锈钢316 L, 6mm外径不锈钢316 Ti,可选热电阻插芯Pt100 温度传感器，EN 60 751，3线制久茂集团的产品范围涵盖了温度、压力、水质分析、流量、液位以及湿度领域的从传感器到自动化解决方案整条测量链。

90.2050 (90.2005)Page 1/5Fax:+49 661 6003-607E-mail:Internet: Fax:+44 1279 63 52 62E-mail:Internet: Fax:315-697-5867E-mail:Internet:Screw-in RTD temperature probes with connectingcable■for temperatures from -50 to +400°C■as single or twin RTD temperature probe ■in 2-wire, 3-wire or 4-wire circuit■connecting cable in PVC, silicone, PTFE or with metal braidingScrew-in RTD temperature probes are mainly used for measuring temperatures in liquids and gases. An important selection criterion is their reliable sealing against both negative and positive pressures. Applications include HVAC, refrigeration, heating installations, ov-ens, furnaces and plant engineering.Depending on the version, the connecting cables are suitable for use in dry and humid ar-eas within the temperature range -50 to +350°C. The junction between cable and protec-tion tube incorporates strain relief. A cable protector can be supplied as an option.The measuring insert is normally fitted with a Pt100 temperature sensor to EN 60 751,Class B in 2-wire circuit. Versions with Pt500 or Pt1000 are also available. In addition,there is a choice of 3-wire or 4-wire circuit connections.Technical dataConnection available with cable ends as: bare wires, with ferrules, receptacles or multipole connector Connecting cablePVC, ambient temperature -5 to +80°C (+105°C)silicone, ambient temperature -50 to +180°C PTFE, ambient temperature -190 to +260°Cmetal braiding, ambient temperature -50 to +350°Cconnecting cable can optionally be supplied with shielding Process connection thread, stainless steel 1.4571Protection tube stainless steel 1.4571 (Type 902050/30 Inconel 2.4816), 5mm, 5.4mm, 6mm and 8mm dia.Measuring insert Pt100 temperature sensor, EN 60 751, Cl. B, 2-wire circuit Response times t 0.5 approx. 2sec, t 0.9 approx. 6sec, in water 0.2m/sec, 6mm dia.Accessoriespocket, see Data Sheet 90.9721 and 90.244090.2050 (90.2005)Page 2/5Fax:+49 661 6003-607E-mail:*************Internet: Fax:+44 1279 63 52 62E-mail:*************.uk Internet: Fax:315-697-5867E-mail:************Internet:DimensionsType 902050/10Type 902050/20Type 902050/30Type 902050/4090.2050 (90.2005)Page 3/5Fax:+49 661 6003-607E-mail:*************Internet: Fax:+44 1279 63 52 62E-mail:*************.uk Internet: Fax:315-697-5867E-mail:************Internet:Order details:Screw-in RTD temperature probes with connecting cable(1)Basic version902050/10Screw-in RTD temperature probe with fixed screw fitting902050/20Screw-in RTD temperature probe with loose screw fitting(2)Operating temperature in °C / connecting cablex x 130-200 to +400°C / metal braiding x x 380-50 to +200°C / silicone x x 386-50 to +260°C / PTFEx x 402-50 to +400°C / metal braiding x x 724-5 to +80°C / PVCx x 912 5 to 105°C / PVC (only with 1 x 2-wire or 3-wire circuit)(3)Measuring insertx x 1001 1 x Pt100 in 3-wire circuit x x 1003 1 x Pt100 in 2-wire circuit x x 1011 1 x Pt100 in 4-wire circuit x x 2001 2 x Pt100 in 3-wire circuit xx20032 x Pt100 in 2-wire circuit (4)Tolerance class to EN 60 751x x 1Class B (standard)x x 2Class A (5)Protection tube diameter D in mm x x 55mm x x 66mm (6)Fitting length EL in mm (50≤ EL ≤500)x 1717mm x 3737mm x x 5050mm x x 100100mm x 137137mm x x 200200mm x 250250mmx x ...please specify in plain text (50mm steps)(7)Process connectionx 102thread 1/4"pipe x 104thread 1/2"pipe x 114thread M 10 x 1(8)Connecting cable endx x 03bare cable endsx x 11ferrules to DIN 46 228 Part 4 (standard)x x 13receptacle 6.3 to DIN 46 247x x 80multipole connector (please specify type in plain text)x x99to customer specification (9)Connecting cable length AL in mm (500≤ AL ≤500000)x x 25002500mmx x ...please specify in plain text (500mm steps)(10)Extra codesx x 000no extra codex x 310stepped protection tube x x 315cable protector: coil x x 316cable protector: tubex x317shielded connecting cable(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)Order code --------/ ,...Order example902050/10-380-1001-1-6-100-104-11-2500/00011.List extra codes in sequence, separated by commas.90.2050 (90.2005)Page 4/5Fax:+49 661 6003-607E-mail:*************Internet: Fax:+44 1279 63 52 62E-mail:*************.uk Internet: Fax:315-697-5867E-mail:************Internet:Order details:Screw-in RTD temperature probes with connecting cable(1)Basic version902050/30Screw-in RTD temperature probe with loose screw fitting and stepped protection tube(2)Operating temperature in °C / connecting cablex 380-50 to +200°C / silicone (3)Measuring insertx 1001 1 x Pt100 in 3-wire circuit x 10031 x Pt100 in 2-wire circuit(4)Tolerance class to EN 60 751x 1Class B (standard)x 2Class A (5)Protection tube diameter D in mm x 5.4 5.4mm dia. stepped down to 3.3mm (6)Fitting length EL in mm x 27.527.5mm (7)Process connection x 114thread M 10 x 1(8)Connecting cable endx 03bare cable endsx 11ferrules to DIN 46 228 Part 4 (standard)x 13receptacle 6.3 to DIN 46 247x 80multipole connector (please specify type in plain text)x 99to customer specification(9)Connecting cable length AL in mm (500≤ AL ≤500000)x 25002500mm x ...please specify in plain text (500mm steps)(10)Extra codesx 000no extra codex 315cable protector: coil x 316cable protector: tubex317shielded connecting cable(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)Order code--------/ ,...Order example902050/30-380-1003-1-5.4-27.5-114-11-2500/00011.List extra codes in sequence, separated by commas.90.2050 (90.2005)Page 5/5Fax:+49 661 6003-607E-mail:*************Internet: Fax:+44 1279 63 52 62E-mail:*************.uk Internet: Fax:315-697-5867E-mail:************Internet:Order details:Screw-in RTD temperature probes with connecting cable(1)Basic version902050/40Screw-in RTD temperature probe, screw-in protection tube(2)Operating temperature in °C / connecting cablex 380-50 to +200°C / siliconex 390-50 to +300°C / metal braiding x 724-5 to +80°C / PVCx 9125 to 105°C / PVC (only with 1 x 2-wire or 3-wire circuit)(3)Measuring insertx 1001 1 x Pt100 in 3-wire circuit x 1003 1 x Pt100 in 2-wire circuit(4)Tolerance class to EN 60 751x 1Class B (standard)x 2Class A(5)Protection tube diameter D in mmx 8M 8(6)Fitting length EL in mmx 2525mm (7)Process connectionx 111thread M 8(8)Connecting cable endx 03bare cable endsx 11ferrules to DIN 46 228 Part 4 (standard)x 13receptacle 6.3 to DIN 46 247x 80multipole connector (please specify type in plain text)x 99to customer specification (9)Connecting cable length AL in mm (500≤ AL ≤500000)x 25002500mmx ...please specify in plain text (500mm steps)(10)Extra codesx 000no extra codex 315cable protector: coil x 316cable protector: tubex317shielded connecting cable(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)Order code--------/ ,...Order example902050/40-390-1003-1-8-25-111-11-2500/00011.List extra codes in sequence, separated by commas.Stock versions:(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)Sales No.--------/902050/10-380-1001-1-6-100-104-11-2500/31690/00065232902050/10-380-1001-1-6-250-104-11-2500/31690/00065235902050/20-130-1003-1-6-37-114-11-2500/315,31790/00055644902050/20-130-1001-1-6-37-114-11-2500/315,31790/00055646902050/30-380-1001-1- 5.4-27.5-114-11-2500/31690/00089972902050/40-390-1003-1-8-25-111-11-2500/315,31790/00055722902050/40-390-1001-1-8-25-111-11-2500/315,31790/00055732。