MyVeritas 使用指南

山西电信CFSHA安装配置报告Oct, 2008Symantec Consulting Services .文件信息版本Subject Symantec 大中国区顾问服务VersionAuthor 胡华波Comments关于作者该文件可以与下列作者取得联系胡华波ConsultantSymantec Consulting Service, Greater China Region *********************修改历史日期作者版本修改内容目录1安装CFSHA4.1 for Linux (4)1.1环境准备 (4)1.2修改安装脚本 (4)1.3安装软件 (5)1.4安装MP4补丁 (17)1.5安装RP2补丁 (25)1.6配置软件 (26)2配置信息 (35)2.1/etc/llttab (35)2.2/etc/VRTSvcs/conf/config/main.cf (35)2.3图形方式配置DG，Volume,FileSystem (38)2.4命令方式配置DG，Volume,FileSystem (45)1 安装CFSHA4.1 for Linux安装软件版本为VCS for RedHat Linux1.1 环境准备配置ssh于每台主机上建立ssh public key[root@SX-MMS-SA-1 rhel4_i686]# ssh-keygen -t rsaGenerating public/private rsa key pair.Enter file in which to save the key (/root/.ssh/id_rsa):Enter passphrase (empty for no passphrase):Enter same passphrase again:Your identification has been saved in /root/.ssh/id_rsa.Your public key has been saved in /root/.ssh/id_rsa.pub.The key fingerprint is:1e:ce:2e:19:73:10:f6:2c:d7:09:4a:b8:02:3f:45:b0 root@SX-MMS-SA-为了scp所有主机同时安装软件，需要主机间scp不用输密码，copy SX-MMS-SA-1上ssh public key至另一主机上[********************]#scpid_rsa.pubSX-MMS-SA-2:/root/.ssh/authorized_keysroot@sx-mms-sa-2's password:id_rsa.pub 100% 226 0.2KB/s 00:001.2 修改安装脚本进入安装路径[root@SX-MMS-SA-1 install]# pwd/sf/rhel4_i686/storage_foundation_cluster_file_system/scripts/install[root@SX-MMS-SA-1 install]# lsCPI41LINUX.pm messages rex vxgettext[root@SX-MMS-SA-1 install]# vi CPI41LINUX.pm将脚本内“4AS”修改为“4ES”$CMD{STOP}{vxsvc}="/opt/VRTS/bin/vxsvcctrl stop";$COMM{LINUX}{SUPPARCHES} = [ qw( i586 i686 ia64 x86_64 ) ];$COMM{LINUX}{SUPPRHRELS} = [ qw( 4AS ) ];$COMM{LINUX}{SUPPSUSERELS} = [ qw( 9 ) ];修改后为$CMD{STOP}{vxsvc}="/opt/VRTS/bin/vxsvcctrl stop";$COMM{LINUX}{SUPPARCHES} = [ qw( i586 i686 ia64 x86_64 ) ];$COMM{LINUX}{SUPPRHRELS} = [ qw( 4ES ) ];$COMM{LINUX}{SUPPSUSERELS} = [ qw( 9 ) ];1.3 安装软件[root@SX-MMS-SA-1 storage_foundation_cluster_file_system]# ./installsfcfs -installonlyVERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATIONPROGRAMCopyright (c) 2005 VERITAS Software Corporation. All rights reserved.VERITAS, the VERITAS Logo and all other VERITAS product names and slogans are trademarks orregistered trademarks of VERITAS Software Corporation. VERITAS and the VERITAS Logo Reg.U.S. Pat. & Tm. Off. Other product names and/or slogans mentioned herein may be trademarks or registered trademarks of their respective companies.Enter the system names separated by spaces on which to install SFCFS: SX-MMS-SA-2 SX-MMS-SA-1Checking system communication:installsfcfs requires that ssh commands used between systems execute without prompting forpasswords or confirmations. If installsfcfs asks for a login password, stop installsfcfsand run it again with the ssh configured for passwordless logins, or configure rsh and usethe -usersh option.Verifying communication with SX-MMS-SA-2 .............................. ping successfulAttempting ssh -x with SX-MMS-SA-2 .................................. ssh -x successfulAttempting scp with SX-MMS-SA-2 ........................................ scp successfulChecking OS version on SX-MMS-SA-2 ............................... Linux 2.6.9-78.ELsmpChecking VRTScavf rpm ................................................... not installedChecking Machine Type on SX-MMS-SA-2 (i686)Checking Linux Distribution on SX-MMS-SA-2 ................................. Redhat 4ESCreating log directory on SX-MMS-SA-2 ............................................ DoneChecking OS version on SX-MMS-SA-1 ............................... Linux 2.6.9-78.ELsmpChecking VRTScavf rpm ................................................... not installedChecking Machine Type on SX-MMS-SA-1 (i686)Checking Linux Distribution on SX-MMS-SA-1 ................................. Redhat 4ESLogs for installsfcfs are being created in /var/tmp/installsfcfs1022150043.Using /usr/bin/ssh -x and /usr/bin/scp to communicate with remote systems.Initial system check completed successfully.Press [Enter] to continue:VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMVERITAS Infrastructure rpm installation:Installing VERITAS Infrastructure rpms on SX-MMS-SA-2:Checking VRTSvlic rpm ................................................... not installedChecking VRTScpi rpm .................................................... not installedChecking file system space ................................ required space is availableCopying VRTSvlic rpm to SX-MMS-SA-2 .............................................. DoneInstalling VRTSvlic 3.02 on SX-MMS-SA-2 .......................................... DoneCopying VRTScpi rpm to SX-MMS-SA-2 ............................................... DoneInstalling VRTScpi 4.1.0.151 on SX-MMS-SA-2 ...................................... DoneInstalling VERITAS Infrastructure rpms on SX-MMS-SA-1:Checking VRTSvlic rpm ................................................... not installedChecking VRTScpi rpm .................................................... not installedChecking file system space ................................ required space is availableInstalling VRTSvlic 3.02 on SX-MMS-SA-1 .......................................... DoneInstalling VRTScpi 4.1.0.151 on SX-MMS-SA-1 ...................................... Done VERITAS Infrastructure rpms installed successfully.Press [Enter] to continue:VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMEach system requires a SFCFS product license before installation. License keys foradditional product features should also be added at this time.Some license keys are node locked and are unique per system. Other license keys, such as demo keys and site license keys, are registered on all systems and must be entered on thefirst system.SFCFS Licensing Verification:Checking SFCFS license key on SX-MMS-SA-2 ................................ not licensedEnter a SFCFS license key for SX-MMS-SA-2: [?] IZPG-I3R3-I6ON-37MG-KX7L-G943-P Registering VERITAS Storage Foundation for Cluster File System DEMO key on SX-MMS-SA-2Do you want to enter another license key for SX-MMS-SA-2? [y,n,q,?] (n)Registering IZPG-I3R3-I6ON-37MG-KX7L-G943-P on SX-MMS-SA-1Checking SFCFS license key on SX-MMS-SA-1 ... Storage Foundation Cluster File System HA DemoDo you want to enter another license key for SX-MMS-SA-1? [y,n,q,?] (n)SFCFS licensing completed successfully.Press [Enter] to continue:VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMinstallsfcfs can install the following optional SFCFS rpms:VRTSobgui VERITAS Enterprise AdministratorVRTSvcsmn VERITAS Cluster Server Man PagesVRTSvcsApache VERITAS Cluster Server Apache AgentVRTSvcsdc VERITAS Cluster Server DocumentationVRTScscm VERITAS Cluster Server Cluster ManagerVRTScssim VERITAS Cluster Server SimulatorVRTSvmdoc VERITAS Volume Manager DocumentationVRTSvmman VERITAS Volume Manager Manual PagesVRTSlvmconv VERITAS Linux LVM to VxVM ConverterVRTSap VERITAS Action ProviderVRTStep VERITAS Task ProviderVRTSfsdoc VERITAS File System DocumentationVRTSfsmnd VERITAS File System Software Developer Kit Manual Pages1) Install all of the optional rpms2) Install none of the optional rpms3) View rpm descriptions and select optional rpmsSelect the optional rpms to be installed on all systems? [1-3,q,?] (1)VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMinstallsfcfs will install the following SFCFS rpms:VRTSperl VERITAS Perl 5.8.0 RedistributionVRTSob VERITAS Enterprise Administrator ServiceVRTSobgui VERITAS Enterprise AdministratorVRTSllt VERITAS Low Latency TransportVRTSgab VERITAS Group Membership and Atomic BroadcastVRTSvxfen VERITAS I/O FencingVRTSvcs VERITAS Cluster ServerVRTSvcsmg VERITAS Cluster Server Message CatalogsVRTSvcsag VERITAS Cluster Server Bundled AgentsVRTSvcsdr VERITAS Cluster Server Disk Reservation Modules and Utilities VRTSvcsmn VERITAS Cluster Server Man PagesVRTSvcsApache VERITAS Cluster Server Apache AgentVRTSvcsdc VERITAS Cluster Server DocumentationVRTSjre VERITAS Java Runtime Environment RedistributionVRTScscm VERITAS Cluster Server Cluster ManagerVRTScssim VERITAS Cluster Server SimulatorVRTScscw VERITAS Cluster Server Configuration WizardsVRTSweb VERITAS Java Web ServerVRTSvcsw VERITAS Cluster Manager (Web Console)Press [Enter] to continue:...continued:VRTScutil VERITAS Cluster UtilitiesVRTSvxvmcommon VERITAS Volume Manager Common Package.VRTSvxvmplatform VERITAS Volume Manager Platform Specific Package.VRTSvmdoc VERITAS Volume Manager DocumentationVRTSvmman VERITAS Volume Manager Manual PagesVRTSvmpro VERITAS Volume Manager Management Services ProviderVRTSfspro VERITAS File System Management Services ProviderVRTSalloc VERITAS Volume Manager Intelligent Storage ProvisioningVRTSddlpr VERITAS Device Discovery Layer Services ProviderVRTSlvmconv VERITAS Linux LVM to VxVM ConverterVRTSvxfscommon VERITAS File System Common Package.VRTSvxfsplatform VERITAS File System Platform Specific Package.VRTSap VERITAS Action ProviderVRTStep VERITAS Task ProviderVRTSfsman VERITAS File System Manual PagesVRTSfsdoc VERITAS File System DocumentationVRTSfssdk VERITAS File System Software Developer KitVRTSfsmnd VERITAS File System Software Developer Kit Manual PagesVRTScavf VERITAS Cluster Server Agents for Cluster File SystemVRTSglm VERITAS Group Lock ManagerPress [Enter] to continue:VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMChecking system installation requirements:Checking SFCFS installation requirements on SX-MMS-SA-2:Checking VRTSperl rpm ................................................... not installedChecking VRTSob rpm ..................................................... not installedChecking VRTSobgui rpm .................................................. not installedChecking VRTSllt rpm .................................................... not installedChecking VRTSgab rpm .................................................... not installedChecking VRTSvxfen rpm .................................................. not installedChecking VRTSvcs rpm .................................................... not installedChecking VRTSvcsmg rpm .................................................. not installedChecking VRTSvcsag rpm .................................................. not installedChecking VRTSvcsdr rpm .................................................. not installedChecking VRTSvcsmn rpm .................................................. not installedChecking VRTSvcsApache rpm .............................................. not installedChecking VRTSvcsdc rpm .................................................. not installedChecking VRTSjre rpm .................................................... not installedChecking VRTScscm rpm ................................................... not installedChecking VRTScssim rpm .................................................. not installedChecking VRTScscw rpm ................................................... not installedChecking VRTSweb rpm .................................................... not installedChecking VRTSvcsw rpm ................................................... not installedChecking VRTScutil rpm .................................................. not installedChecking VRTSvxvmcommon rpm ............................................. not installed Checking VRTSvxvmplatform rpm ........................................... not installed Checking VRTSvmdoc rpm .................................................. not installedChecking VRTSvmman rpm .................................................. not installedChecking VRTSvmpro rpm .................................................. not installedChecking VRTSfspro rpm .................................................. not installedChecking VRTSalloc rpm .................................................. not installedChecking VRTSddlpr rpm .................................................. not installedChecking VRTSlvmconv rpm ................................................ not installedChecking VRTSvxfscommon rpm ............................................. not installed Checking VRTSvxfsplatform rpm ........................................... not installedChecking VRTSap rpm ..................................................... not installedChecking VRTStep rpm .................................................... not installedChecking VRTSfsman rpm .................................................. not installedChecking VRTSfsdoc rpm .................................................. not installedChecking VRTSfssdk rpm .................................................. not installedChecking VRTSfsmnd rpm .................................................. not installedChecking VRTScavf rpm ................................................... not installedChecking VRTSglm rpm .................................................... not installedChecking file system space ................................ required space is available Checking for patch(1) rpm ..................................... version 2.5.4 installedChecking vxsvc process .................................................... not runningChecking had process ...................................................... not runningChecking hashadow process ................................................. not runningChecking CmdServer process ................................................ not runningChecking notifier process ................................................. not runningChecking vxfen driver ..................................................... not runningChecking gab driver ....................................................... not runningChecking llt driver ....................................................... not running Checking SFCFS installation requirements on SX-MMS-SA-1:Checking VRTSperl rpm ................................................... not installedChecking VRTSob rpm ..................................................... not installedChecking VRTSobgui rpm .................................................. not installedChecking VRTSllt rpm .................................................... not installedChecking VRTSgab rpm .................................................... not installedChecking VRTSvxfen rpm .................................................. not installedChecking VRTSvcs rpm .................................................... not installedChecking VRTSvcsmg rpm .................................................. not installedChecking VRTSvcsag rpm .................................................. not installedChecking VRTSvcsdr rpm .................................................. not installedChecking VRTSvcsmn rpm .................................................. not installedChecking VRTSvcsApache rpm .............................................. not installed Checking VRTSvcsdc rpm .................................................. not installedChecking VRTSjre rpm .................................................... not installedChecking VRTScscm rpm ................................................... not installedChecking VRTScssim rpm .................................................. not installedChecking VRTScscw rpm ................................................... not installedChecking VRTSweb rpm .................................................... not installedChecking VRTSvcsw rpm ................................................... not installedChecking VRTScutil rpm .................................................. not installedChecking VRTSvxvmcommon rpm ............................................. not installed Checking VRTSvxvmplatform rpm ........................................... not installed Checking VRTSvmdoc rpm .................................................. not installedChecking VRTSvmman rpm .................................................. not installedChecking VRTSvmpro rpm .................................................. not installedChecking VRTSfspro rpm .................................................. not installedChecking VRTSalloc rpm .................................................. not installedChecking VRTSddlpr rpm .................................................. not installedChecking VRTSlvmconv rpm ................................................ not installedChecking VRTSvxfscommon rpm ............................................. not installed Checking VRTSvxfsplatform rpm ........................................... not installedChecking VRTSap rpm ..................................................... not installedChecking VRTStep rpm .................................................... not installedChecking VRTSfsman rpm .................................................. not installedChecking VRTSfsdoc rpm .................................................. not installedChecking VRTSfssdk rpm .................................................. not installedChecking VRTSfsmnd rpm .................................................. not installedChecking VRTScavf rpm ................................................... not installedChecking VRTSglm rpm .................................................... not installedChecking file system space ................................ required space is availableChecking for patch(1) rpm ..................................... version 2.5.4 installedChecking vxsvc process .................................................... not runningChecking had process ...................................................... not runningChecking hashadow process ................................................. not runningChecking CmdServer process ................................................ not runningChecking notifier process ................................................. not runningChecking vxfen driver ..................................................... not runningChecking gab driver ....................................................... not runningChecking llt driver ....................................................... not runningInstallation requirement checks completed successfully.Press [Enter] to continue:VERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMI/O FencingI/O Fencing requires manual configuration after SFCFS Installation.If not properly configured, I/O Fencing will become disabled.It needs to be determined at this time if you plan to configureI/O Fencing in order to properly set the expected Fencing mode.See the Storage Foundation Cluster File System Installationand Administration Guide for more information on I/O Fencing.Will you be configuring I/O Fencing? [y,n,q,?] (y) nVERITAS STORAGE FOUNDATION CLUSTER FILE SYSTEM 4.1 INSTALLATION PROGRAMSFCFS can be installed on systems consecutively or simultaneously. Installing on systems consecutively takes more time but allows for better error handling.Would you like to install Storage Foundation Cluster File System HA on all systems simultaneously? [y,n,q,?] (y)Installing Storage Foundation Cluster File System HA 4.1 on all systems simultaneously:Copying VRTSperl rpm to SX-MMS-SA-2 ............................... Done 1 of 117 stepsInstalling VRTSperl 4.1.0.0 on SX-MMS-SA-1 ........................ Done 2 of 117 stepsInstalling VRTSperl 4.1.0.0 on SX-MMS-SA-2 ........................ Done 3 of 117 stepsCopying VRTSob rpm to SX-MMS-SA-2 ................................. Done 4 of 117 stepsInstalling VRTSob 3.2.540 on SX-MMS-SA-1 .......................... Done 5 of 117 stepsInstalling VRTSob 3.2.540 on SX-MMS-SA-2 .......................... Done 6 of 117 stepsInstalling VRTSobgui 3.2.540 on SX-MMS-SA-1 ....................... Done 7 of 117 stepsInstalling VRTSllt 4.1.00.10 on SX-MMS-SA-1 ....................... Done 8 of 117 stepsCopying VRTSobgui rpm to SX-MMS-SA-2 .............................. Done 9 of 117 stepsInstalling VRTSgab 4.1.00.10 on SX-MMS-SA-1 ...................... Done 10 of 117 stepsInstalling VRTSvxfen 4.1.00.10 on SX-MMS-SA-1 .................... Done 11 of 117 stepsInstalling VRTSobgui 3.2.540 on SX-MMS-SA-2 ...................... Done 12 of 117 stepsCopying VRTSllt rpm to SX-MMS-SA-2 ............................... Done 13 of 117 stepsInstalling VRTSllt 4.1.00.10 on SX-MMS-SA-2 ...................... Done 14 of 117 stepsCopying VRTSgab rpm to SX-MMS-SA-2 ............................... Done 15 of 117 stepsInstalling VRTSvcs 4.1.00.10 on SX-MMS-SA-1 ...................... Done 16 of 117 stepsInstalling VRTSvcsmg 4.1.00.10 on SX-MMS-SA-1 .................... Done 17 of 117 steps Installing VRTSvcsag 4.1.00.10 on SX-MMS-SA-1 .................... Done 18 of 117 steps Installing VRTSgab 4.1.00.10 on SX-MMS-SA-2 ...................... Done 19 of 117 stepsCopying VRTSvxfen rpm to SX-MMS-SA-2 ............................. Done 20 of 117 stepsInstalling VRTSvcsdr 4.1.00.10 on SX-MMS-SA-1 .................... Done 21 of 117 stepsInstalling VRTSvcsmn 4.1.00.10 on SX-MMS-SA-1 .................... Done 22 of 117 steps Installing VRTSvxfen 4.1.00.10 on SX-MMS-SA-2 .................... Done 23 of 117 stepsInstalling VRTSvcsApache 4.1.00.10 on SX-MMS-SA-1 ................ Done 24 of 117 steps Installing VRTSvcsdc 4.1.00.10 on SX-MMS-SA-1 .................... Done 25 of 117 stepsCopying VRTSvcs rpm to SX-MMS-SA-2 ............................... Done 26 of 117 stepsInstalling VRTSjre 1.4 on SX-MMS-SA-1 ............................ Done 27 of 117 stepsInstalling VRTScscm 4.4.00.10 on SX-MMS-SA-1 ..................... Done 28 of 117 steps Installing VRTSvcs 4.1.00.10 on SX-MMS-SA-2 ...................... Done 29 of 117 stepsCopying VRTSvcsmg rpm to SX-MMS-SA-2 ............................. Done 30 of 117 stepsInstalling VRTScssim 4.1.00.10 on SX-MMS-SA-1 .................... Done 31 of 117 stepsInstalling VRTSvcsmg 4.1.00.10 on SX-MMS-SA-2 .................... Done 32 of 117 steps Installing VRTScscw 4.1.00.10 on SX-MMS-SA-1 ..................... Done 33 of 117 stepsCopying VRTSvcsag rpm to SX-MMS-SA-2 ............................. Done 34 of 117 stepsInstalling VRTSweb 4.2 on SX-MMS-SA-1 ............................ Done 35 of 117 stepsInstalling VRTSvcsag 4.1.00.10 on SX-MMS-SA-2 .................... Done 36 of 117 steps Copying VRTSvcsdr rpm to SX-MMS-SA-2 ............................. Done 37 of 117 stepsInstalling VRTSvcsw 4.4.00.10 on SX-MMS-SA-1 ..................... Done 38 of 117 stepsInstalling VRTSvcsdr 4.1.00.10 on SX-MMS-SA-2 .................... Done 39 of 117 stepsCopying VRTSvcsmn rpm to SX-MMS-SA-2 ............................. Done 40 of 117 stepsInstalling VRTScutil 4.1.00.10 on SX-MMS-SA-1 .................... Done 41 of 117 stepsInstalling VRTSvcsmn 4.1.00.10 on SX-MMS-SA-2 .................... Done 42 of 117 stepsCopying VRTSvcsApache rpm to SX-MMS-SA-2 ......................... Done 43 of 117 stepsInstalling VRTSvcsApache 4.1.00.10 on SX-MMS-SA-2 ................ Done 44 of 117 steps Installing VRTSvxvmcommon 4.1.00.10 on SX-MMS-SA-1 ............... Done 45 of 117 steps Copying VRTSvcsdc rpm to SX-MMS-SA-2 ............................. Done 46 of 117 stepsInstalling VRTSvcsdc 4.1.00.10 on SX-MMS-SA-2 .................... Done 47 of 117 stepsCopying VRTSjre rpm to SX-MMS-SA-2 ............................... Done 48 of 117 stepsInstalling VRTSjre 1.4 on SX-MMS-SA-2 ............................ Done 49 of 117 stepsInstalling VRTSvxvmplatform 4.1.00.10 on SX-MMS-SA-1 ............. Done 50 of 117 steps Copying VRTScscm rpm to SX-MMS-SA-2 .............................. Done 51 of 117 stepsInstalling VRTSvmdoc 4.1.00.10 on SX-MMS-SA-1 .................... Done 52 of 117 stepsInstalling VRTScscm 4.4.00.10 on SX-MMS-SA-2 ..................... Done 53 of 117 stepsInstalling VRTSvmman 4.1.00.10 on SX-MMS-SA-1 .................... Done 54 of 117 stepsCopying VRTScssim rpm to SX-MMS-SA-2 ............................. Done 55 of 117 stepsInstalling VRTSvmpro 4.1.00.10 on SX-MMS-SA-1 .................... Done 56 of 117 stepsInstalling VRTSfspro 4.1.00.10 on SX-MMS-SA-1 .................... Done 57 of 117 stepsInstalling VRTScssim 4.1.00.10 on SX-MMS-SA-2 .................... Done 58 of 117 stepsCopying VRTScscw rpm to SX-MMS-SA-2 .............................. Done 59 of 117 stepsInstalling VRTSalloc 4.1.00.10 on SX-MMS-SA-1 .................... Done 60 of 117 stepsInstalling VRTScscw 4.1.00.10 on SX-MMS-SA-2 ..................... Done 61 of 117 stepsInstalling VRTSddlpr 4.1.00.10 on SX-MMS-SA-1 .................... Done 62 of 117 stepsCopying VRTSweb rpm to SX-MMS-SA-2 ............................... Done 63 of 117 stepsInstalling VRTSlvmconv 4.1.00.10 on SX-MMS-SA-1 .................. Done 64 of 117 stepsInstalling VRTSvxfscommon 4.1.00.10 on SX-MMS-SA-1 ............... Done 65 of 117 steps Installing VRTSweb 4.2 on SX-MMS-SA-2 ............................ Done 66 of 117 stepsCopying VRTSvcsw rpm to SX-MMS-SA-2 .............................. Done 67 of 117 stepsInstalling VRTSvcsw 4.4.00.10 on SX-MMS-SA-2 ..................... Done 68 of 117 stepsCopying VRTScutil rpm to SX-MMS-SA-2 ............................. Done 69 of 117 stepsInstalling VRTScutil 4.1.00.10 on SX-MMS-SA-2 .................... Done 70 of 117 stepsInstalling VRTSvxfsplatform 4.1.00.10 on SX-MMS-SA-1 ............. Done 71 of 117 stepsCopying VRTSvxvmcommon rpm to SX-MMS-SA-2 ........................ Done 72 of 117 steps Installing VRTSap 2.00 on SX-MMS-SA-1 ............................ Done 73 of 117 stepsInstalling VRTStep 1.20 on SX-MMS-SA-1 ........................... Done 74 of 117 stepsInstalling VRTSfsman 4.1.00.10 on SX-MMS-SA-1 .................... Done 75 of 117 stepsInstalling VRTSfsdoc 4.1.00.10 on SX-MMS-SA-1 .................... Done 76 of 117 stepsInstalling VRTSvxvmcommon 4.1.00.10 on SX-MMS-SA-2 ............... Done 77 of 117 stepsInstalling VRTSfssdk 4.1.00.10 on SX-MMS-SA-1 .................... Done 78 of 117 stepsInstalling VRTSfsmnd 4.1.00.10 on SX-MMS-SA-1 .................... Done 79 of 117 stepsCopying VRTSvxvmplatform rpm to SX-MMS-SA-2 ...................... Done 80 of 117 steps Installing VRTScavf 4.1.00.10 on SX-MMS-SA-1 ..................... Done 81 of 117 stepsInstalling VRTSglm 4.1.00.10 on SX-MMS-SA-1 ...................... Done 82 of 117 stepsInstalling VRTSvxvmplatform 4.1.00.10 on SX-MMS-SA-2 ............. Done 83 of 117 steps Copying VRTSvmdoc rpm to SX-MMS-SA-2 ............................. Done 84 of 117 stepsInstalling VRTSvmdoc 4.1.00.10 on SX-MMS-SA-2 .................... Done 85 of 117 stepsCopying VRTSvmman rpm to SX-MMS-SA-2 ............................. Done 86 of 117 stepsInstalling VRTSvmman 4.1.00.10 on SX-MMS-SA-2 .................... Done 87 of 117 steps Copying VRTSvmpro rpm to SX-MMS-SA-2 ............................. Done 88 of 117 stepsInstalling VRTSvmpro 4.1.00.10 on SX-MMS-SA-2 .................... Done 89 of 117 stepsCopying VRTSfspro rpm to SX-MMS-SA-2 ............................. Done 90 of 117 stepsInstalling VRTSfspro 4.1.00.10 on SX-MMS-SA-2 .................... Done 91 of 117 stepsCopying VRTSalloc rpm to SX-MMS-SA-2 ............................. Done 92 of 117 stepsInstalling VRTSalloc 4.1.00.10 on SX-MMS-SA-2 .................... Done 93 of 117 stepsCopying VRTSddlpr rpm to SX-MMS-SA-2 ............................. Done 94 of 117 stepsInstalling VRTSddlpr 4.1.00.10 on SX-MMS-SA-2 .................... Done 95 of 117 stepsCopying VRTSlvmconv rpm to SX-MMS-SA-2 ........................... Done 96 of 117 stepsInstalling VRTSlvmconv 4.1.00.10 on SX-MMS-SA-2 .................. Done 97 of 117 steps Copying VRTSvxfscommon rpm to SX-MMS-SA-2 ........................ Done 98 of 117 steps Installing VRTSvxfscommon 4.1.00.10 on SX-MMS-SA-2 ............... Done 99 of 117 steps Copying VRTSvxfsplatform rpm to SX-MMS-SA-2 ..................... Done 100 of 117 steps Installing VRTSvxfsplatform 4.1.00.10 on SX-MMS-SA-2 ............ Done 101 of 117 steps Copying VRTSap rpm to SX-MMS-SA-2 ............................... Done 102 of 117 stepsInstalling VRTSap 2.00 on SX-MMS-SA-2 ........................... Done 103 of 117 stepsCopying VRTStep rpm to SX-MMS-SA-2 .............................. Done 104 of 117 stepsInstalling VRTStep 1.20 on SX-MMS-SA-2 .......................... Done 105 of 117 stepsCopying VRTSfsman rpm to SX-MMS-SA-2 ............................ Done 106 of 117 stepsInstalling VRTSfsman 4.1.00.10 on SX-MMS-SA-2 ................... Done 107 of 117 stepsCopying VRTSfsdoc rpm to SX-MMS-SA-2 ............................ Done 108 of 117 stepsInstalling VRTSfsdoc 4.1.00.10 on SX-MMS-SA-2 ................... Done 109 of 117 stepsCopying VRTSfssdk rpm to SX-MMS-SA-2 ............................ Done 110 of 117 stepsInstalling VRTSfssdk 4.1.00.10 on SX-MMS-SA-2 ................... Done 111 of 117 stepsCopying VRTSfsmnd rpm to SX-MMS-SA-2 ............................ Done 112 of 117 stepsInstalling VRTSfsmnd 4.1.00.10 on SX-MMS-SA-2 ................... Done 113 of 117 stepsCopying VRTScavf rpm to SX-MMS-SA-2 ............................. Done 114 of 117 stepsInstalling VRTScavf 4.1.00.10 on SX-MMS-SA-2 .................... Done 115 of 117 stepsCopying VRTSglm rpm to SX-MMS-SA-2 .............................. Done 116 of 117 steps。

ZHE JIANG UNIVERSITY QWARE TECHNOLOGY GROUP Veritas Netbackup 安装、配置及维护手册目录第 1 部分 VERITAS NBU简介 (2)第 2 部分 NBU基本概念 (5)第 3 部分 NBU 管理界面 (7)3.1 配置存储单元 (7)3.1.1 存储单元配置要求 (7)3.1.2 配置一个介质管理的存储单元 (8)3.1.3 配置一个磁盘类型的存储单元 (10)3.2 配置备份策略（Policy） (13)3.2.1 备份策略的组成 (13)3.2.2 如何规划一个Policy (16)3.2.3 如何创建一个Policy (21)3.2.4 其它安装配置 (34)3.3 任务监视器（Activity Monitor） (38)3.4 NetBackup报告 (40)3.5 设备管理（device manager） (47)3.5.1 增加一个机械手 (47)3.5.2 增加一个驱动器 (50)3.5.3 机械手与驱动器配置实例 (51)3.6 介质管理 (54)3.6.1 如何启动介质管理 (54)3.6.2 配置Volume Pool (55)3.6.3 增加一个Volume Pool (55)3.6.4 Scratch Volume Pool (56)3.6.5 增加卷 (56)3.6.6 使用Robot Inventory功能增加一个机械手控制的卷 (56)3.6.7 不使用Robot Inventory功能增加一个卷 (58)3.6.8 移动卷 (59)3.6.9 Deassign一个卷 (60)3.6.10 改变一个卷的属性 (60)3.6.11 更换一个卷 (62)第 1 部分 VERITAS NBU简介NBU是VERITAS 公司提供的企业级备份管理软件，它支持多种操作系统，包括UNIX、Microsoft Windows、OS/2以及Macintosh等。

VERITAS9.0实用操作手册（经验版）Kernel ()目录●安装指南一、服务器端的安装二、服务器端的配置二、客户端的安装三、安装过程中的常见问题●应用指南一、WIN2000系统的备份/恢复1、提交备份作业1、恢复到同一台计算机上2、异机的恢复（恢复到到不同的计算机上）●SQL数据库服务器的备份与恢复1、仅仅数据库损坏，手工恢复系统库以及用户数据库2、灾难恢复SQL数据库3、重定向恢复数据库安装指南说明：本操作指南中使用的VRITAS的版本号为9.1.4691,是目前最新版的VERITAS EXEC版本。

本操作手册仅仅是一个快速入门手册，更详细的操作请参考《Veritas Exec用户参考手册》对于VRITAS9.0的安装有两种方式：升级安装和全新安装。

升级安装是指企业中原先在使用VRITAS8.6产品，那么你得到新的9.0产品时一般是VERITAS 公司的升级光盘，这个升级光盘是不能够全新安装的，只能从V8.6版本上升级到9.0。

在光盘的协议中会提供一组升级用的序列号。

这样就麻烦一些，要先安装V8.6然后再升级到9.0。

关键就是序列号的问题，因为只有升级序列号，如果有全新的序列号，那么就可以全新安装的。

因为在从V8.6升级到V9.0的时候，VERITAS会生成一组新的安装序列号。

因此只要把安装后的SN记录下来，就可以把升级安装变成全新的完全安装了。

全新安装问题会少很多,但是客户机必须要把原来的V8.6组件全部卸载掉，然后再安装V9.0组件。

安装前客户端和服务器端有几个前提要注意一下：1．MDAC的版本也有要求，要2.7以上，WINDOWS 2000 SERVER中的是2.6 看MDAC的版本号在注册表的：\HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\DataAccess中可以看到。

2．介质服务器端需要的安装SQL2000客户端（注意是客户端，不是服务器端），主要是为了备份SQL2000 SERVER需要。

Veritas User Guide Quick Reference GuideTHANK YOU FOR VOTING TEXECOM THANK YOU FOR VOTING TEXECOMUSER GUIDESecurity Control PanelsIssue 21 INS167Overview Premier Series User Guide 2 INS221 IntroductionUsers of the alarm system will be assigned a unique 4, 5 or 6 digit User code. User codes are used to arm and disarm the system. Some User codes can also access additional options such as, system tests and omitting zones.Keypads will be installed throughout the premises, usually one at each entry/exit door. The keypads are used to perform all of the system operations i.e. Arming, Disarming etc. Most User codes can be used at any keypad on the system. However, Local Users will only be able to use certain keypads on the system.The Emergency KeysIn case of emergency, the alarm system can provide three immediate emergency alarms by pressing and holding two specific keys for two seconds. !"The emergency keys can be enabled/disabled for each keypad on the system.The Panic alarm can be programmed for either audible or silent operation.The Panic alarm can be programmed for either instant or delayed operation. Emergency AlarmPress KeysPanic Alarm (PA)! & " Fire# & $ Medical% & &The Quick Arm Keys The ‘Quick Arm’ keys allow the system to be armed without having to enter a User code first. !"The ‘Quick Arm’ keys will only work if the keypad has been programmed to allowarming in this way.To FULL arm the system, press '.To PART arm the system, press !, ( or " followed by ).Keypad LockThe keys on the keypad can be locked to prevent unwanted access to the system. !"The Emergency keys will NOT operate with the keys locked.To Lock the keys, press * and + together.To Unlock the keys, press * and + together again.Premier Serie s User Guide Overview INS221 3LED IndicatorsFive LED indicators have been provided to indicate the status of the system. LEDStatus Meaning PowerOn AC mains is present on the control panelFlashing AC Mains is not present, the control panel is running on the standby battery ServiceOn The system requires attention, contact your installerOff The system does NOT require attention ReadyOn All zones are secure and the system is ready to be armedOff One or more zones are activeFlashing The system has zones (with the ‘Force Omit’ attribute) that are active Info.On The system is armed (can also be programmed for other indications)Off The system is unarmed (can also be programmed for other indications) OmitOn One or more zones are omitted Off No zones are omittedZone Faults During ArmingBefore attempting to arm the system, ensure that the premises are secure (all doors and windows closed etc.) and the Ready light is on.If an attempt is made to arm the system with any zones active (e.g. door ajar, open window, etc.) the internal sounders will bleep repeatedly (fault tone) and the display will show the zones that are active.The fault tone will stop and the exit tone will resume when all zones are secure. If it is necessary to leave a zone open then it must be omitted (see page 8 for details). !"If an active zone cannot be secured then it may be ‘in fault’, in this case contact the alarm company immediately. Arm Fail - Failing to Arm If the exit procedure is started and zones are still ‘Active’ at the end of the exit procedure, an Internal alarm will occur (internal sounders only) and the strobe light on the external sounder will flash. !"If this occurs the arm fail must be cleared and the zone in fault identified before the system can be armed (see page 6 for details on clearing an Arm Fail). The Ready LED To help prevent faults during arming a Ready light has been provided, see table above for details on how the Ready LED operates.Operating the Alarm System Premier Series User Guide 4 INS221 To FULL Arm the SystemThe system is FULL Armed when ALL zones are ON (not omitted). !"Your Installer may have programmed the system so that it can be set by just pressing', if this is the case then there is no need to enter the User code below.1. Ensure that the premises are secure (all doors and windows closed etc.) and the Ready light is on2. Enter a valid User code ,,,,3. Press * to armThe exit tone will sound4. Leave the premisesWhen the system has armed the exit tone will stopTo PART Arm the SystemThe system is PART Armed , when ONE OR MORE zones have been left OFF (omitted) i.e. the landing or a bedroom. !"The system is only Part Armed when zones are omitted using the ‘Part Arm’ procedure(omitting zones manually (see page 8 for details) is not classed as Part Arming).The bottom line of the display is programmable for each Part Arm.Your Installer may have programmed the system so that it can be Part Armed by just pressing !, ( or " followed by ), if this is the case then there is no need to enter the User code below.1. Ensure that the premises are secure (all windows and doors not being omitted are closed) and the Ready light is on2. Enter a valid User code ,,,,3. Press )4. Use keys ! - " to select the required Part Arm5. Press * to arm normally or press - to arm silentlyThe exit tone will sound (if silent arm has not been selected)6. Leave the protected areaWhen the system has armed, the exit tone (if sounding) will stopPremier Serie s User Guide Operating the Alarm System INS221 5 To ARM Individual AreasIf the system has been split up into separate areas of protection i.e. Area 1 = House, Area 2 = Garage, Area 3 = Shed etc. These areas can be individually selected for FULL or PART arming as required. !"Areas are selected by using keys ! - . (the / key can also be used toselect an area followed by ' or +).Only areas that exist on the system can be selected. (A ‘Star’ means the area can be selected and a ‘Dot’ means the area cannot be selected).Pressing 0 will select/deselect all areas, pressing ' will toggle between the first 8 areas and the second 8 areas (where applicable).1. Ensure that the premises are secure (all windows and doors not being omitted are closed) and the Ready light is on2. Enter a valid User code ,,,,3. Press '4. Use keys ! - . to select the required areas5. Press * or - to FULL arm the areasOr5. Press )!, ( or " followed by * or - to PART arm the areas The exit tone will sound (if silent arm has not been selected)6. Leave the premisesWhen the system has armed, the exit tone (if sounding) will stop To DISARM the SystemThe entry time is divided into two sections, the Entry time and the 2nd Entry time. If the Entry time expires, an Internal alarm will occur and the 2nd Entry time will start. If the 2nd Entry time expires, an Intruder alarm will occur (all internal and external sounders). !"It is perfectly normal for the 2nd Entry time to be programmed as zero, in whichcase, an Intruder alarm will occur as soon as the Entry time expires.1. Enter the premises via the designated entry pointThe entry tone will start2. Enter a valid User code ,,,,The entry tone will stopOperating the Alarm System Premier Series User Guide 6 INS221 To DISARM the System When Not in Entry1. Enter a valid User code ,,,,2. Press * To CANCEL the Exit ModeOnce the exit mode has been started you should leave the premises immediately, however, if for some reason you decide not to leave, the exit mode must be cancelled.1. Enter a valid User code ,,,,2. Press *The exit tone will stop. To CLEAR an Arm FailWhen the system tries to arm with zones active (open), the internal sounders will sound and the external strobe will be flashing to indicate a problem. For details on preventing an Arm Fail condition, please refer to page 3. !"If you were not present when the Arm Fail occurred or you do not clear the ArmFail, the internal sounders will continue to sound and the external strobe will continue to flash.1. Enter a valid User code ,,,,The internal and external sounders will stop, the external strobe will continue to flash and the number of the zone that caused the Arm Fail will be displayed.2. Enter a valid User code ,,,, and press 12 To SILENCE an AlarmWhen an alarm occurs on the system, the internal and external sounders will normally sound for a pre-programmed time (normally 15 minutes). !"If you were not present when the alarm activated, the internal and externalsounders may have already stopped but the external strobe will still be flashing. When alarm information is being displayed, pressing the SCROLL key will slow down the display and also allow manual scrolling through the events.1. Enter a valid User code ,,,,The internal and external sounders will stop and the number of the zone that caused the alarm will be displayed.The alarm now needs to be reset.Premier Serie s User Guide Operating the Alarm System INS221 7 To RESET After an AlarmUSER ResetOnce the alarm has been silenced (see page 6 for details), the system will need to be reset. !"If the system has been programmed, to be reset by an Engineer, pressing 1 willnot return the display to normal, if this is the case see ENGINEER Reset for details. The system may have been programmed to be reset by Anti-code, if this is the case, see ANTI-CODE Reset for details.1. Enter a valid User code ,,,,2. Press 1The external strobe will stop, the system will chime and the display will return to normal. ENGINEER ResetIf the system has been programmed to be reset by an Engineer following an alarm activation, you will still be able to silence the alarm by entering a valid User code (see page 6 for details). !"The system cannot be armed again until the alarm has been reset.1. Contact the telephone number on the display (if programmed) or the telephone number on the last page of this User GuideANTI-CODE ResetIf the system has been programmed to be reset using an Anti-Code following an alarm activation, you will still be able to silence the alarm by entering a valid User code (see page 6 for details).!"The system cannot be armed again until the alarm has been reset.1. Enter a valid User code ,,,,2. Press 1The display will show a random code number i.e. 4281.3. Contact the telephone number on the display (if programmed) or the telephone number on the last page of this User Guide and quote the random code number You will be given a 4-digit Anti-Code i.e. 5624.4. Enter the Anti-code that has been given to you ,,,,5. Press *If the Anti-code is correct, the keypad will bleep to indicate that the system has been reset and the display will return to normal.Operating the Alarm System Premier Series User Guide 8 INS221 To OMIT ZonesIt is possible to exclude (omit) individual zones when arming i.e. if a zone is ‘in fault’. Users with access to this function can only omit zones that have been programmed as ‘Omittable’. !"If the zone can be omitted, there will be a ‘Star’ to the right of the zone number.Only zones that have the ‘Omit’ attribute assigned to them can be omitted.A ‘Star’ will appear to the left of the zone number to indicate that the zone has been selected for omitting.All omitted zones will be automatically reinstated the next time the system is disarmed, unless programmed otherwise.To re-instate zones manually, simply follow the instructions again. However, when the 3 key is pressed on this occasion, the zones will be re-instated.1. Enter a valid User code ,,,, and press 32. Enter the zone number ,,,3. Press 3 to omit the selected zoneRepeat for other zones if required.4. Press 4 when finishedContinue to arm the system as normal. The Turn CHIME On and OffThe system can be set up so that activating (opening) certain zones will cause the internal sounders to chime. This would normally be used on a front door, exit button etc. !"Zones will only cause the internal sounders to chime if they are selected for chime (see page Master User Guide for details on selecting which zones chime). Once a zone has been selected for chime, the Chime facility can be manually turned on and off as required.!"The system can also be programmed to automatically turn chime on and off under certain conditions i.e. certain times of the day, door left open etc.If no zones have been programmed for Chime, then turning Chime on and off will have no effect.To turn CHIME OnTo turn CHIME Off 1. Press -1. Press - The Chime tone will sound.The Error tone will sound.Premier Serie s User Guide Operating the Alarm System INS221 9 To CHANGE Your User CodeUsers with access to this option can change their own User codes. User codes are unique to each user and can be 4, 5 or 6 digits long.!"Only the User code that is entered to access the change code menu will be changed. Before changing your code, it is vital that you memorise or write down the new code you are about to program. Failure to remember your code will require an engineer visit to re-program a new code for you. This may incur a call-out charge.1. Enter the User code that requires changing ,,,,2. Press 43. Press *4. Press (5. Press *6. Enter a new 4, 5 or 6-digit User code ,,,,7. Press * to accept the new code8. Press 1 to exit the menuThe display will return to normal.Quick Reference Guide Premier Series User Guide10 INS221 OperationDescription Action To Full Arm the SystemEnter a valid User code ,,,, Press Yes (or press Chime to arm silently) * or - To Part Arm the System Enter a valid User code ,,,, Press Part ) Select Required Part Arm !, ( or " Press Yes (or press Chime to arm silently) * or - To Arm Individual Areas Enter a valid User code ,,,, Press Area ' Select Required Area using keys 1 - 8 ! - . Press Yes (or press Chime to arm silently) * or - To Disarm the System Enter a valid User code ,,,, Press Yes (if the entry mode was not started) *To Cancel the Exit Mode Enter a valid User code ,,,, Press Yes * To Clear an Arm Fail Enter a valid User code ,,,, Press Reset 1 To Silence an Alarm Enter a valid User code ,,,, To Reset After an Alarm Enter a valid User code ,,,, Press Reset 1 To Engineer Reset Contact Your Installation Company_____________ To Anti-code Reset Enter a valid User code ,,,, Press Reset 1 Contact Your Alarm Receiving Centre_____________ Quote 4-digit code shown on display !"#$%&'((((' Enter 4-digit code given by Receiving Centre ,,,, Press Yes *To Omit Zones Enter a valid User code ,,,, Press Omit 3 Enter Zone Number(s) ,,,… Press Menu when finished 3 Press Yes to Arm * Turn Chime On/Off Press Chime Once to Turn ON - Press Chime Again to Turn OFF - To Change User Code Enter a valid User code ,,,, Press Menu followed by Yes 4* Press 2 followed by Yes (* Enter a new 4, 5 or 6 digit User code ,,,, Press Yes to accept * Press Reset to return to the normal display 1Premier Series User Guide Installation DetailsINS221 11AreasNo. DescriptionExit TimeEntry Time 1Entry Time 2Bell DelayBell DurationAbort TimeSec. Sec. Sec. Min. Min. Sec. Sec. Sec. Sec. Min. Min. Sec. Sec. Sec. Sec. Min. Min. Sec.Sec.Sec.Sec.Min.Min.Sec.KeypadsEmergency Keys No. LocationArea Quick Arm PA Fire MedUser CodesUser Name Type Default New Code Area Time Lock 01 Master 5678N/AN/AN/AN/AN/AZonesPart ArmsNo. DescriptionType Area Omit 12 3Installation Company DetailsInstallation Engineer:Installation Company:Address:Telephone Number:Installation Date:Service RecordDate Serviced Comments EngineerEmergency Telephone NumbersFor 24 Hour Call Out For Anti-Code ResetControl PanelDetailsModel Premier 24 ❏Premier 48 ❏Premier 88 ❏Premier 168 ❏ Premier 640 ❏Location© TEXECOM LTD. 2000 - 2005INS221-2。