说明书PDF-转换器(全部)

FeaturesRegulated Converter• 4:1 wide input range• 3kVAC reinforced insulation for 110Vin 2.25kVDC basic insulation for 24Vin & 48Vin • Efficiency up to 93%• No minimum load required• EN50155, IEC/EN60950-1 & UL60950-1 certifiedDescriptionThe half-brick RP100H series DC/DC converters are designed for railway rolling stock and high voltage battery applications. Each series has three 4:1 input voltage range options to cover all input voltages from 9VDC up to 160VDC with isolated and regulated 5V to 48VDC outputs. The converters have high efficiencies and metal base-RP100H-RW DC/DC Converter100 Watt Half BrickEN50155 certifiedIEC/EN60950-1 certified UL60950-1 certifiedE196683RP100H-2415SRW 9-36 15 6700 4601 100 91 4460RP100H-2424SRW 9-36 24 4200 4666 101 90 1750RP100H-2448SRW 9-36 48 2100 4666 101 90 430RP100H-4805SRW 16.5-75 5 20000 2240 100 93 40000RP100H-4812SRW 16.5-75 12 8400 2333 101 90 7000RP100H-4815SRW 16.5-75 15 6700 2300 100 91 4460RP100H-4824SRW 16.5-75 24 4200 2333 101 90 1750RP100H-4848SRW 16.5-75 48 2100 2307 101 90 430RP100H-11005SRW 43-160 5 20000 1010 100 93 40000RP100H-11012SRW 43-160 12 8400 1018 101 90 7000RP100H-11015SRW 43-160 15 6700 1015 100 91 4460RP100H-11024SRW 43-160 24 4200 1018 101 90 1750RP100H-11048SRW 43-160 48 2100 1007 101 90 430Ordering ExamplesRP100H-2405SRW/N = 24V Input, 5V Output, Single, Neg. CTRL function RP100H-11012SRW/P = 110V Input, 12V Output, Single, Pos. CTRL functionRP100H-2405SRW/N-HC = 24V Input, 5V Output, Single, Neg. CTRL function, premounted Heat-sinkModel NumberingInput Voltage Output VoltageS ingleRP100H-__ __SRW/_ _Notes:Note2: standard part is with suffix “P” for positive logic (1=ON, 0=OFF) or add suffix “N” instead for negative logic (0=ON, 1=OFF) Note3: add suffix “-HC” for premounted Heat-sink CTRL Logic (2)Package (3)Notes:Note1:Efficiency is tested by nominal Vin, full load and at 25°Chttps:///pdf/Powerline_DC-DC/RSPxxx-168.pdf/eval-ref-boardsSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)RP100H-4805SRW708090100Efficiency vs. Output CurrentPower up Start-up CharacteristicON/OFF Control Start-up Rise CharacteristicSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)Efficiency vs. Input Voltage60708090100708010090RP100H-11005SRWEfficiency vs. Output CurrentPower up Start-up CharacteristicSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)OUTPUT TRIM Typical Output Ripple and NoisePower up Start-up CharacteristicOutput Voltage TrimmingRP100H-RW converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. The values for trim resistors shown in trim tables below are according to standard E96 values; therefore, the specified voltage may slightly vary; they also can be calculated with below shown equation.TRIM DOWNTRIM UPTRIM-Sense+SenseSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)OUTPUT TRIMRP100H-xx05SRWRP100H-xx12SRWRP100H-xx15SRWRP100H-xx24SRWRP100H-xx48SRWTrim Down all Vout‘sTrim up 12345678910%Vout = 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.4 5.45 5.50Volts R 1 = 30915810578.763.453.646.440.236.533.2kOhms Trim up 12345678910%Vout =12.1212.2412.3612.4812.6012.7212.8412.9613.0813.20Volts R 1 = 88745330122618215413311810595.3kOhms Trim up 12345678910%Vout =15.1515.3015.4515.6015.7515.9016.0516.2016.3516.50Volts R 1 = 1130576383294237196169150137124kOhms Trim up 12345678910%Vout =24.2424.4824.7224.9625.2025.4425.6825.9226.1626.40Volts R U = 1870953634487392324280249226205kOhms Trim up 12345678910%Vout =48.4848.9649.4449.9250.4050.8851.3651.8452.3252.80Volts R 1 = 3830196013001000806681576511464422kOhms Trim down 12345678910%R 2 = 97.647.531.623.217.814.712.110.59.098.06kOhms Trim down 11121314151617181920%R 2 =7.156.345.765.114.644.223.923.573.243.01kOhmsTrim CalculationVout = Output VoltageR 1 =100*Vout+D Vout * Vout)- (100+2D Vout) k Ω D Vout = Output Voltage Trim in %1.225*D Vout D VoutR1 =trim up resistorR2 = trim down resistor R 2 = 100 - 2 k ΩD Vout Practical Example:Trim Up:Vout = 5V, D Vout = 10% (5.5V)R 1 =100*Vout+D Vout * Vout) - (100+2D Vout) k Ω = 100*5 +10*5 - 100+2*10= 44.89 - 12 = 32.9k Ω 1.225*D Vout D Vout 1.225*10 10Trim down:Vout = 5V, D Vout = -10% (4.5V)R 2 = 100 - 2 k Ω = 100 - 2 = 8.06k ΩD Vout 10Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)REGULATIONSParameter Condition ValueOutput Accuracy±1.0%Line Regulation low line to high line at full load±0.1% Load Regulation0% to 100% load0.1% Transient Response25% load step change200µs typ.; 250µs max.Transient Response to Dynamic Load Change from 100% to 75% to 100% of Full Load at nom.VinRP100H-4805SRWRP100H-2405SRWRP100H-11005SRWSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)ENVIRONMENTALParameterCondition ValueOperating Case Temperature Range refer to derating graphMaximum Case Temperature 105°CTemperature Coefficient ±0.02%/°C max.Thermal Impedance vertical direction by natural convection (0.1m/s) without Heat-sink vertical direction by natural convection (0.1m/s) with Heat-sink6.7°C/W 4.7°C/W Operating Humidity 5% - 95% RHPollution Degree PD2Shock according to EN61373 standard Thermal Shock according to MIL-STD-810F standardVibrationaccording to EN61373 standardFire protection on railway vehicles according to EN45545-2, 2013 standardMTBFaccording to MIL-HDBK-217F standard, 25°C408.7 x 103 hoursPROTECTIONSParameterConditionValueShort Circuit Protection (SCP)below 100m Ωcontinuous, automatic recovery Over Voltage Protection (OVP)% of nom. Vout115%-130%, Hiccup Mode Over Load Protection (OLP)% Iout rated24Vin, 48Vin 110Vin120%-150%, Hiccup Mode 150% typ., Hiccup ModeOver Temperature Protection (OTP)+110°C to +120°C Isolation Voltage110VinI/P to O/P I/P or O/P to Case 3kVAC/1minute 1.5kVAC/1minute 24Vin, 48VinI/P to O/P I/P or O/P to Case2.25kVDC/1minute 1.6kVDC/1minuteIsolation Resistance 500 VDC1G Ω min.Isolation Capacitance 2500pF max.Isolation Grade110 Vin 24Vin, 48Vin reinforced insulationbasic insulationThermal CalculationNotes:Note4: Refer to local wiring regulations if input over-current protection is also required. Recommended fuse: T35A slow blow.R thcase-ambient = 6.7°C/W (vertical) T case = Case Temperature R thcase-ambientHC = 4.7°C/W (vertical) T ambient = Environment Temperature P dissipation = Internal lossesR thcase-ambient = T case - T ambientP IN = Input PowerP dissipationP OUT = Output Power h = Efficiency under given Operating ConditionsP dissipation = P IN - P OUT = P OUTapp- P OUTapp R thcase-ambient = Thermal Impedance h Practical Example:Take the RP100H-2405SRW with 9V input Voltage and 50% load. What is the maximum ambient operating temperature? Use converter vertical in application without airflow.Eff min = 91% @ V nomP OUT = 100W P OUTapp = 100 x 0.5 = 50W h = 91% (Efficiency vs. Load Graph)without Heat-sink with Heat-sinkR th = T casemax - T amb --> 6.7°C/W = 105-T amb R thHC = T casemax - T amb--> 4.7°C/W = 105-T amb P dissipation 4.95W P dissipation4.95W T amb = 72°C T ambHC = 82°CSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)DC/DC ConverterSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)RP100H-RWSeriesConducted Emission EN55022 Class AConducted Emission EN55022 Class AC4C5C6C7C8Shield PlaneL1C18+V INEMI Filtering according to EN55022/11 Class A and EN50121-1 (110Vin)DC/DC ConverterSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)RP100H-RWSeriescontinued on next pageEMI Filtering according to EN55022/11 Class B (24Vin and 48Vin)Shield Plane100-110xxSRW, Class BNNC6C9C8C3C4CaseL2C7C19C20Shield PlaneC12C13C14C10C11C16C2C4L1L2C5C8C6C7C11C3Conducted Emission EN55022 Class ADC/DC ConverterSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)RP100H-RWSeriesEMI Filtering according to EN55022/11 Class B (110Vin)C8Shield PlaneShield PlaneC9C1C2C3C11C12C10CaseL1C4C5C8C13C14C17C9C19C3C4L1L2C12C10C11C15C15Shield PlaneC9C10C12Conducted Emission EN55022 Class BSpecifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)Specifications (measured @Ta = 25°C, resistive load, nominal Vin and rated Iout unless otherwise noted)The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorizeduse of RECOM products in such safety-critical applications.PACKAGING INFORMATIONParameterTypeValuePackaging Dimension traywithout Heat-sink with Heat-sink157.0 x 88.0 x 12.8mm 157.0 x 88.0 x 24.8mmPackaging Quantity 2pcs.Storage Temperature Range -55°C to +125°C Storage Humidity5% - 95% RH。

1000M单模/多模转换器产品介绍》该产品是本公司针对1000M以太网实现多模光纤与单模光纤互通转换，它采用双光电模块直流直接匹配技术，对数字信号不产生任何影响，因此它有极大的通用性。

》该模块提供了对光纤接口信号的检测指示灯，便于安装和使用。

主要应用于多模850nm 或1310nm波长与单模1300nm、1310nm、1550nm波长之间转换。

产品图片产品特点◆支持1000M以太网传输速度的光电转换◆支持1000Base-LX协议与符合光纤接口特性◆支持全双工操作、支持热插拔操作◆提供光纤连接状态指示灯,多模(MM)MPL和单模(SM)SPL状态灯,调试更加直观方便◆解决工业传输与控制光纤不匹配时的应用◆光电一体化模块提供良好的光特性和电气特性，保证数据传输可靠，工作寿命长◆它支持内置、2U机架式模式转换模块，方便了用户安装的选择◆平均无故障工作时间在5万小时以上，符合电信级运营标准◆售后服务完备，提供三年的质量保证和终身维修服应用领域◆多模光纤与单模光纤相互通讯的场合◆城市智能交通监控系统（ITS）、平安城市◆高速公路监控系统、电子道路监控、网络摄像机◆大型厂矿企业安防监控系统、网络多功能系统◆远程多媒体教学/ 校园监控、远程网络电视会议系统光学特性（光纤传输特性）: 光纤接口通常为SC,可订做ST 或FC类型/ 参数 发射波长 (nm) 发射功率dBm 传输距离Km 光损耗dBm/Km 允许损耗dBm 光纤种类多模 1310-19.5~-16 0-3 1 12 1310nm(多模) 1310 -12~-7 0~20 0.5 16 单模(9/125um) 1310 -8~-50~40 0.5 20 单模(9/125um) 1550DFB -6~-2 0~60 0.25 25 单模(9/125um) 单模1550DFB -2~00~1000.2526单模(9/125um)光纤接口特性光纤接口：双光口，SC 光口光纤特点：可以单纤或双纤 光口模式：两个光口可以单模或多模设计 光纤传输距离：两个光口距离可以定制环境要求环境温度：0℃～+70℃ 贮存温度：-45 ℃～+95 ℃ 相对湿度：0～95% (无冷凝结) 额定供电电压： AC85-260V/50Hz MTBF ：≥ 10万小时电源功耗：2.5 w （Input:DC5V 1000mA ）产品认证CE,FCC,RoHS,国电认证订货信息：（包装方式：独立式与插卡式，插卡式适用于2U标准机架）型号描述规格（光纤接口为“SC”口），外置电源ONV-S/M-1000M-813 1000M以太网单多模转换器，多模850nm转单模1310nm ONV-S/M-1000M-815 1000M以太网单多模转换器，多模850nm转单模1550nm 注: 根据用户的需求可定制不同的规格，常规接口为SC，ST口可定做单模光纤传输距离有（20公里、40公里、60公里、100公里）多模光纤传输距离有（500米）产品整机配套清单:用户手册保修卡合格证开关电源适配器产品设备壹本壹份壹份壹套壹套联系我们中国深圳总公司电话：*************传真：*************技术支持：*************-6208(分机)销售邮箱：*************.cn技术邮箱：***************.cn公司邮箱：***********.cn网址：邮编：518000地址：深圳市宝安区龙华大浪街道办大浪社区华宁路西森裕泰科技园A栋五楼。

HT100系列 HART协议适配器说明书1、HT100系列 产品简介HT100系列 HART协议适配器是采用高性能的十六单片机及配置最流行HART协议调制解调集成芯片并结合大量的实践经验所研发出来的。

采用工业产品要求设计，具有很高的可靠性及稳定性，保证了数据进行实时传输。

HART 协议使用 Bell202 频移键控(FSK) 标准，在4-20mA 基础上叠加低电平的数字信号, 使得HART 协议智能仪表在不干扰4-20mA 模拟信号的同时允许双向数字通讯。

4-20mA 模拟和 HART 数字通讯信号能在一条线对上同时传递。

2、产品外形3、产品选型型号 RS232 RS485 LCD HT100A1 √ HT100B1 √ HT100A2 √ √ HT100B2 √ √4、 产品特点POWER 表示电源指灯,亮表示电源正常。

TXD 、RXD 灯详细说明见《中文HT100系列指令说明.pdf》0H T10系列接口：RS232、RS485（二者选一） 通讯速率：9600, 8 ,1 , none 输入电压：12V-24V 工作电流：<50mA工作温度：-20--75℃(显示屏除外) 相对湿度：10%-80%(显示屏除外) 尺寸：120mm *75mm *45mm5、与HART仪表连接示意图0H T10系列列系1TH3.2 与四线制HART协议仪表连接示意图6、与PC机波特率设置详见〈中文HT100系列指令说明.pdf〉7、HART协议常用命令介绍7．1 命令0X00 读取设备标识码请求：无响应：扩展的设备类型代码，版本和设备标识码。

表示的意义如下：字节0： 254字节1： 制造商ID 字节2： 制造商设备类型 字节3： 请求的前导符数0H T10系列字节4： 通用命令文档版本号 字节5： 变送器规范版本号 字节6： 设备软件版本号 字节7： 设备硬件版本号字节8： 设备标志字节9-11： 设备ID号7．2 命令0X03：读动态变量和主变量电流读主变量电流和4个（最多）预先定义的动态变量，主变量电流总是匹配设备的AO输出电流。

xxxTwo AC inputs with integrated transfer switchThe Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.Two AC OutputsThe main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.Virtually unlimited power thanks to parallel operationUp to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity.Three phase capabilityThree units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity.PowerControl – Dealing with limited generator, shore side or grid powerThe Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.PowerAssist – Boosting shore or generator powerThis feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuring - In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minuteswith a DIP switch setting procedure. - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus SystemConfigurator software. - Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT SolarChargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and control Color Control GX or other GX devices.Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.Quattro48/5000/70-100/100Color Control GX, showing a PV applicationg) input voltage ripple too highSeveral interfaces are available:Digital Multi Control PanelA convenient and low cost solution for remotemonitoring, with a rotary knob to setPowerControl and PowerAssist levels. BMV-712 Smart BatteryMonitorUse a smartphone or other Bluetoothenabled device to:customize settings,monitor all important data onsingle screen,view historical data, and toupdate the software when newfeatures become available. Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The NetherlandsGeneral phone: +31 (0)36 535 97 00 | E-mail: ***********************。

NCH软件Doxillion 文档转换器已创建此用户指南以供使用Doxillion 文档转换器版本7.xx©NCH软件技术支持如果你有困难使用Doxillion 文档转换器请在请求支持之前阅读适用的主题。

如果您的问题未在本用户指南中介绍请查看最新信息Doxillion 文档转换器在线技术支持/documentconvert/cn/support.html。

如果这不能解决您的问题，您可以使用该页面上列出的技术支持联系人与我们联系。

软件建议如果您有任何改进建议Doxillion文档转换器或者您可能需要的其他相关软件的建议，请在我们的建议页面上发布.au. 我们的许多软件项目都是在像您这样的用户提出建议后进行的。

如果我们您的建议被采用，您将获得免费升级。

Doxillion 文档转换器内容介绍 (2)开始 (3)如何使用多西利翁 (4)多西利翁支持哪些格式？ (5)转换错误和信息 (7)PDF 格式 (8)刻录到光盘 (9)提取图像 (10)打印到 PDF (11)文档密码 (12)扫描文档预览 (13)文档设置 (14)转换为表 (15)合并 PDF (16)压缩 PDF (17)通过电子邮件发送文档 (18)电子邮件设置 (19)使用多西尔利翁命令行工具 (20)快捷键引用 (21)NCH 软件套件 (22)软件许可条款 (23)图像设置JPEG 压缩设置 (24)BMP 编码设置 (25)PNG 编码设置 (26)PNM 编码设置 (27)TIFF 编码设置 (28)JPEG 2000 压缩设置 (29)PDF 编码设置 (30)网页压缩设置 (31)GIF 编码设置 (32)计划选项选项 * 覆盖 (33)选项 * 转换 (34)选项 * 其他 (35)选项 + 右键单击 (36)屏幕参考“发送电子邮件”对话框 (37)1感谢您安装多西利翁。

多西利翁文档文件转换软件是 Windows的文档格式转换器。

KGW3204/KPS3204系列协议转换器硬件安装手册出版日期：2017年10月版本：V1.0KGW3204/KPS3204系列协议转换器硬件安装手册免责声明：北京东土科技股份有限公司竭力使本手册中的信息尽可能准确、最新。

然而本公司不能保证本手册完全没有任何技术错误或笔误，并保留在未通知用户的情况下对其修改的权利。

保留所有权限：本手册著作权属北京东土科技股份有限公司所有。

未经著作权人书面许可，任何单位或个人不得以任何方式摘录、翻版、复制、翻译或者用于商业目的分发等行为。

侵权必究。

Copyright © 2017 Kyland Technology Co.,Ltd.安全使用须知本产品在设计使用范围内具有良好可靠的性能，但需要避免人为对设备造成的损害或破坏。

使用设备前，请仔细阅读该手册，以保障用户人身和设备的安全。

阅读后请妥善保管本手册，以备将来参考。

对于违反安全使用须知造成的人身伤害或设备损坏，我司不承担任何责任。

●请勿将设备放置、安装在接近水源或潮湿的地方，保持设备周边的相对湿度在5%～95%范围内且无凝结。

●请勿将设备放置、安装在高磁、强震或高温的地方，保持设备的工作、存储温度在规定范围内。

●保持设备放置稳妥，防止坠落；保持设备安装紧固，防止滑脱。

●保持设备及周边环境清洁，必要时可用干软棉布擦拭。

●请勿在设备或线缆上放置杂物，保持设备散热通畅，线缆顺畅无打结。

●操作设备时需佩戴防静电手套或采取其他安全防护。

●接线时避免金属线裸露，防止金属线高温氧化或联电。

●需按照本国、本地电器法规安装设备。

●上电前需确认设备支持的电源规格，防止电压过高损坏设备。

●保持电源插头及其它设备连接件连接牢固，防止接触不良影响使用。

●请勿用湿手插拔电源，断电前请勿用湿手触摸设备及设备配套零件。

●操作带电设备前，请取下首饰（戒指、手镯、手表、项链等）或其他金属物品，防止触电或烫伤。

●雷电天气时，请勿操作设备或连接、断开线缆。

PAF700F Series700W 48V InputFull Brick DC-DC ConvertersKey Market Segments & ApplicationsCentral Office:ATM, Sonet, DSL, ISDN, Frame Relay Broadband:Switching Equipment, RoutersWireless/Cellular:Micro Cells (larger in size/10 sq. mi.)Pico Cells (smaller in size/1 to 2 sq. mi.)Remote Electronics:Fixed Local Loop, Fibre OpticTransmission, Microwave Transmission,Wireless Local LoopBase Station Power Amplifiers Intermediate Bus Architectures • 12V output for driving non-isolated converters • 12V, 28V output for BTS amps• Full power at +85°C baseplate, operation to +100°C • Opto Isolated Remote On / Off • Wide Adjustable Output RangePAF700F Features and BenefitsFeaturesBenefits• Wide adjustment range • Reduces need for custom modules• Parallel Pin • Modules can be connected together for higher current • ASIC Design• Reduced component count, increased MTBFSpecificationsNotes: See Installation Manual for full details, test methods of parameters and application notes.MODEL PAF700F48-12PAF700F48-28ITEMSNominal Output Voltage VDC 1228Output Current (Max)A 58.525Output Power (Max)W 702700Efficiency (Typ)%90% 91%Input Voltage Range VDC 36-76Input Current(Typ)A 16.516.4Output Voltage Accuracy %±1Output Voltage Adjustment VDC 7.2 - 13.816.8 - 32.2Ripple & Noise (Max)mV 200280Line Regulation (Max)mV 2456Load Regulation (Max)mV 2456Temperature Coefficient -0.02%/°C Overcurrent Protection %105 - 140%Overvoltage Protection %120 - 135%Parallel Operation Yes Series Operation YesSignals & Control-Remote sense, remote On/Off, Parallel Pin, DC Good, 7-10V Auxiliary voltageOperating Temperature --40°C to +100°C baseplate Humidity (operating)-20 - 95% RH Non condensing Humidity (storage)-10 - 95% RH Non condensingCooling-Conduction (See Installation Manual for heatsink selection)Isolation Voltage VDC Input - Baseplate 1500V, Input - Output 1500V, Output-Baseplate 500V (for 1 min.)Shock -196.1m/s 2Vibration-Non Operating, 10-55Hz (sweep for 1 min.)Amplitude 0.825mm constant (Max 49 m/s 2) X,Y,Z 1 hour eachSafety Agency Approvals -IEC/UL/CSA/EN62368-1, 60950-1, CE MarkWeight (Typ)g 200Size (WxHxD)mm (in) 61 x 12.7 x 116.8 (2.4 x 0.5 x 4.6) See outline drawingWarrantyyrs2Note1Use external fuse of fast blow type, for each unit2Put input capacitor, C1 and C2, greater than 220uf for each. If the impedance of input line is high, C1 and C2 capacitance must be greater than above.3Put output capacitor, C3 (12v: more than 470uF,28V: greater than 220uF). If the ambient temperature is less than -20C, use 4 pieces of therecommended capacitor above.4Refer to instruction manual for further details.Full Brick Max Power Full Nominal Input Output Option SuffixWatts Function VoltageVoltage PAF700F4812 or 28Blank = M3 Tapped insertsT = 3.3mm Non-threaded through holeConnection ExampleDerating CurvePart Number SchemeOutline Drawing PAF700FNoteA:Model name, input voltage range, nominal output voltage, maximum output current,country of manufacture are shown here in accordance with the specificationsB:M3 tapped holes for customer chassis mounting (FG)C:Input and output pin: 8-02D:Signal pin : 8-01E:Unless otherwise specified dimensional tolerance +0.3mmPinoutPin Description Function-Vin Negative Input Terminal+Vin Positive Input Terminal- ON/OFF Remote On/Off Negative Terminal+ON/OFF Remote On/Off Positive Terminal+V Positive Output Terminal-V Negative Output TerminalAUX7-10V Aux VoltageIOG DC GoodPC Parallel Control ConnectionTRIM Output Adjustment Trim Pin+S Positive Remote Sense-S Negative Remote SensePAF700F Oct20 v3TDK-Lambda France SAS3 Avenue du CanadaParc TechnopolisBâtiment Sigma91940 les UlisFranceTel:+33 1 60 12 71 65Fax:+33 1 60 12 71 66********************.com/frItaly Sales OfficeVia Giacomo Matteotti 6220092 Cinisello Balsamo (MI)ItalyTel:+39 02 61 29 38 63Fax:+39 02 61 29 09 00*************************.com/itNetherlands******************.com/nlTDK-Lambda Germany GmbHKarl-Bold-Strasse 4077855 AchernGermanyTel:+49 7841 666 0Fax:+49 7841 5000**************************.com/deAustria Sales OfficeAredstrasse 222544 LeobersdorfAustriaTel:+43 2256 655 84Fax:+43 2256 645 12******************.com/atSwitzerland Sales OfficeEichtalstrasse 558634 HombrechtikonSwitzerlandTel:+41 44 850 53 53Fax:+41 44 850 53 50******************.com/chNordic Sales OfficeHaderslevvej 36BDK-6000 KoldingDenmarkTel:+45 8853 8086******************.com/dkTDK-Lambda UK Ltd.Kingsley AvenueIlfracombeDevon EX34 8ESUnited KingdomTel:+44 (0) 12 71 85 66 66Fax:+44 (0) 12 71 86 48 94******************.com/ukTDK-Lambda Ltd.1 Alexander YanaiSegulaPetah-TikvaIsraelTel:+9 723 902 4333Fax:+9 723 902 4777******************.il/ilC.I.S.Commercial Support:Tel:+7 (495) 665 2627Technical Support:Tel:+7 (812) 658 0463******************/ruLocal Distribution。

©福昕软件保留所有权未经福昕公司授权，此文档禁止以任何形式复制、转移、分配或储存。

Anti-Grain Geometry -Version 2.4© Maxim Shemanarev ()本产品的某些部分属于© [2001-2017] Solid Documents所有。

在所有副本中的版权提示允许的情况下，您可以复制、使用、修改、出售和分配该软件。

此软件不含任何隐藏条款，对于使用本软件所产生的任何后果，均由用户本人承担。

目录目录 (2)第一章–概述 (5)福昕高级PDF编辑器概述 (5)功能新增和改进 (6)关于手册 (8)快速安装指南 (8)关于福昕插件 (8)GPO功能 (10)使用Foxit Setup Customization Tool (10)第二章–使用入门 (12)工作区域 (12)自定义工作区 (18)偏好设置 (18)第三章–阅读 (29)打开PDF文档 (29)保存PDF文档 (30)关闭PDF文档 (31)导出PDF文件 (31)Foxit PDF IFilter (32)PDF行业标准验证及创建符合PDF相应标准的文档 (32)阅读 (33)查看PDF文档中的3D内容 (45)选择&复制 (46)字数统计 (48)检查PDF的辅助功能 (48)东亚语言包 (49)第四章–创建 (50)用不同方式创建PDF文档 (50)创建和定制PDF文件包 (63)将PDF文档识别成可搜索和可编辑的PDF文档 (63)从书签中创建PDF文档的目录 (66)第五章–编辑 (67)链接 (67)附件 (70)书签 (72)图像 (75)PDF优化 (80)动作向导（仅适用于企业版） (81)多媒体 (83)段落编辑 (86)对象 (86)关于图像编辑窗口（仅适用于企业版） (98)拼写检查 (106)PDF属性 (107)第六章–页面管理 (109)插入页面 (109)旋转、移动、交换和删除页面 (111)提取、复制和替换页面 (113)拆分文档到多个文件 (115)裁剪页面 (115)扁平化页面 (116)添加页眉页脚、水印和背景 (116)贝茨数（仅适用于企业版） (118)格式化页码 (119)第七章–注释 (120)注释工具 (120)更改注释外观 (131)管理注释 (132)第八章–共享文档 (139)将PDF文档作为邮件附件发送 (139)SharePoint集成 (139)共享审阅和邮件审阅 (141)NetDocuments集成 (144)iManage WorkSite集成 (145)福昕企业文件柜插件 (147)第九章–表单 (148)交互式表单和非交互式表单 (148)添加表单注释 (151)管理表单数据 (151)表单域 (153)运行JavaScript (171)第十章–安全 (174)查看PDF文档安全性 (174)密码保护和证书保护 (174)活动目录权限管理服务（AD RMS，仅适用于企业版） (178)删除敏感信息 (191)密文（仅适用于企业版） (191)使用AD RMS功能保护密文（仅适用于企业版） (193)第十一章–签名 (194)数字签名 (194)PDF快速签名 (200)第十二章–打印 (202)打印PDF文档 (202)设置“打印”对话框 (203)设置Foxit PhantomPDF Printer属性 (205)第十三章–附录 (210)快速安装指南 (210)组策略手册 (217)福昕高级PDF编辑器多语言安装包的组策略分发 (226)SharePoint配置 (229)Windows Azure活动目录权限管理快速入门 (231)Web Service配置 (231)键盘快捷键 (243)命令行 (247)联系我们 (248)第一章–概述福昕高级PDF编辑器概述欢迎使用福昕PDF电子文档处理套装软件。

Ratings• UL ா 1008 Listed•CSA ா C22.2 No. 178 CertifiedIndustrial design highlights•Double-throw, mechanically interlocked transfer mechanism • Front accessible •Top, bottom and side cable entry•Internal cable gutter space•Seismic Zone 4 qualified (CBC and IBC)• OSHPD certification •Field-selectable, multi-tap transformer permits wide range of system voltages •Manual operation under load with permanently affixed handle• Internal deadfront cover • Padlock provision •Self-protecting switching contacts•Mechanical lug terminationStandard and optional controller featuresDescriptionAutomatic ControllerATC-100ATC-300+ATC-900Basic transfer control, plant exerciser, timedelays, self diagnostics and system settings Standard Standard Standard Source mimic diagram with LED indication Standard Standard Standard Engine test and start contact Standard Standard Standard Dual source control power input StandardStandard Standard Liquid crystal display (LCD)Standard Standard Programmable set points and plant exerciser Standard Standard Password protectionStandard Standard Time-stamped history and event log Standard Standard Time delay bypassStandard Standard Go to source 2 control input Standard Standard Pre-transfer and general alarm control outputsStandard Standard Lockout and monitor modesStandard Standard Source status output relay contacts Standard Standard Modbus ா RTU communication Standard Standard Manual retransfer control input Optional Standard Source 2 inhibit / load shed inputOptionalStandard USB port—profile and data management Standard Preferred source selection Standard Dual generator capabilityStandard User configurable inputs/outputsStandard Advanced diagnostics and troubleshooting with pre-/post-event data capture Standard Integrated load meteringOptional Load management with selective load shed Optional DC voltage control power inputOptional Three-source ATS—master/slave control Optional Modbus TCP/IP communication AOptionalOptionalA Modbus TCP/IP option requires use of Modbus RTU port.Unmatched performance, reliability and versatilityEaton’s molded-case switch/circuit breaker (MCS/MCCB) type automatic transfer switch (ATS) is designed toprovide unmatched performance, reliability and versatility for critical standby power applications requiring open transition with time delay. Configurable features include integral overcurrent protection and service entrance rated equipment.Product confi gurations• 30–1000 A, 100% rated • Two-, three- and four-pole • Single- and three-phase • 120–600 Vac, 50/60 Hz •NEMA ா 1, 3R, 12, 4X enclosure types• Open frame•Open transition with time delay•ATC-100, ATC-300+, ATC-900 controller • Service entrance rated •Integrated meteringEaton is a registered trademark.All other trademarks are property of their respective owners.Eaton1000 Eaton Boulevard Cleveland, OH 44122United States © 2014 EatonAll Rights Reserved Printed in USAPublication No. PA140005EN / Z15340July 2014Catalog numbering systemotee:N The catalog numbering system for molded-case switch/breaker ATS offers a wide variety of standard configurations to meet your application needs. Please be advised that some catalog number combinations are not available. Please contact your local Eaton sales representative with any quotation-related questions.Service entrance equipmentEaton’s MCS/MCCB type transfer switch can easily be configured to be suitable for use as service equipment in the standard enclosure size.Service equipment rated transfer switches may be installed at the point of service entrance without the need for separate upstream disconnect devices and additional power connections.All service equipment is UL 1008 Listed and includes integral overcurrent protection, keyed service disconnect switch and fused disconnect of control power.UL 1008 short-circuit withstand/close-on ratings (kA)Switch Ampere UL 1008 Short-Circuit “Any Breaker” RatingUL 1008 Rating When Used With Upstream Fuse Maximum Fuse Fuse A Four-pole configuration is 35 kA.Optional accessories• Overcurrent protection with thermal-magnetic trip • Integrated distribution circuit breaker panel• Automatic controller protective cover with padlock provision • Surge protection device (UL 1449 3rd Edition)•Remote annunciator controller—monitor and control single or multiple automatic transfer switches •Ethernet gateway with Web server (Modbus TCP/IP , SNMP , BACnet)•Space heater with thermostatEnclosure dimensions and approximate shipping weightMCS/MCCB Frame Transfer Switch Ampere Enclosure Dimensions (Inches) A Approx.Shipping Weight lbs (kg) ATC-300+ATC-900A NEMA 1 and 3R type.B Standard three-pole configuration.C Applies to single-phase, 120/240 Vac or 120/208 Vac, three-wire and three-phase, 208/120 Vac,four-wire standard configurations without multi-tap transformer.D All other three-phase, standard configurations that include multi-tap transformer.Standard cable terminal connectionsSwitchAmpere MCS/MCCB Standard Cu/Al Terminal Lugs (kcmil)Normal and Emergency A Applies to standard two- and three-pole configurations with solid neutral.CUSTOM ORDER ENGINEERINGIn many cases, standard product can be custom- order engineered to meet your application needs. For additional information, please contact your local Eaton sales representative.。

PDF文电通3 专业版最新功能PDF文档处理功能Gaaiho PDF 反向转换器：批量精确转换PDF文档为其他格式文件Gaaiho PDF 反向转换器可以批量将多个PDF文档精确转换为Word、Excel、图片或文本文件，并通过不同格式的高级设置，加强转换文件后文本、表格和图片的正确性。

专为批量转档设计。

拖拽文件即能添加至程序内进行文件转换。

不同文件格式有各自的高级设置，加强转换文件后文字、表格及图片的正确性。

支持多种转换格式：Word (*.doc, *.docx)、Excel (*.xls, *.xlsx)、图片(JPEG, JPEG2000, PNG, TIFF)、文本(Unicode, Simple)。

Microsoft AD RMS (Active Directory Rights Management Services)为提供企业用户全面的文件保护，Gaaiho PDF套件3.0支持Microsoft AD RMS功能。

利用权限设置，让特定的域用户使用指定功能，大幅增加文件安全性。

PDF管理器：整合及管理计算机中所有PDF文档PDF管理器能快速扫描计算机中所有的PDF文档，并进行组织化的管理。

让您能于管理窗口内轻松浏览、快捷搜索或同步修改、复制、删除、重新命名文件。

特色：组织化管理，快速扫描计算机内全部的PDF文档，并支持快捷搜索功能。

在窗口内轻松浏览并管理PDF文档。

协作：多人同步编辑模式，提高会议效率只要利用局域网络，用户即能同时邀请多位参与者共同编辑文档。

发起共同编辑的用户能够在邀请前设定密码或选择安全设置，还能在过程中邀请或移除参与者。

通过跟踪与动作提示一起查看文档，能快速地汇整各方意见、提高会议效率。

在同一个局域网络进行联机，即可进入多人共同编辑模式。

能够设定密码或选择安全设置，加强信息安全。

发起者能随时邀请或移除参与者，掌握自主性。

通过跟踪与动作提示，可以看见参与者光标的位置与正在使用的功能。