功能涂料电子产品说明书

3A8380DZH 零配件操作便携式电动无气喷涂机适用于建筑涂料的便携式无气喷涂 (390 PC)。

用于划线材料（ES 500 Stencil）。

未获准用于爆炸性环境或危险性（分类）场所。

仅适用于专业用途。

390 PC 便携型号：25T804, 826280, 25T863, 25T943, 25T882, 25T805ES 500 Stencil 型号：25U513, 25U5143300 磅/平方英寸（228 巴，22.8 MPa）最大工作压力相关手册重要安全说明请在使用该设备之前，阅读本手册内所有的警告和说明内容，以及所有的相关手册内容。

熟悉操控装置并正确使用。

请妥善保存这些说明。

手册描述311861喷枪（Contractor/FTX）334599泵3A6285喷枪 (Contractor PC)311254Silver/Flex Plus仅使用固瑞克正品备件。

使用非固瑞克备件予以替换可能导致保修无效。

目录型号 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3重要的接地信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4警告 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5组件识别 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8架式型号. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Hi-Boy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9接地说明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10料桶 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11泄压步骤 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12扳机锁 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14安装和拆卸电池 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17启动 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18操作 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20喷嘴的安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20喷洒 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20清除喷嘴堵塞物 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22清洗 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23清洁流体的兼容性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26维护 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27故障排除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28机械/流体流量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28电气 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31零配件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Stencil 喷枪延长件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38喷枪、软管和标签. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39接线图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40技术参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41美国加州第 65 号提案. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Graco 标准保修 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Graco 信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4423A8380D3A8380D 3型号注意： 有关喷枪的信息，请参见喷枪、软管和标签，第 39 页。

__________________________________________________________________________________________1. PRODUCT AND COMPANY IDENTIFICATIONProduct IdentificationProduct ID:360-1322-35Product Name:35 SHEEN FP WHITE PERMAFLEX II Product Use:Paint product.Effective date:03/Jun/2010Revision Date:03/Jun/2010UN ID Number (msds):UN1263WHMIS Classification:D2B Toxic Material D2A Very Toxic Material B2 Flammable LiquidsCompany Identification Valspar, Inc.1915 Second Street West Cornwall , Ontario K6H 5T1Tech Info Phone:1-613-932-896024-Hour Medical Emergency Phone:1-888-345-57322. HAZARDS IDENTIFICATIONPrimary Routes of Exposure:Inhalation IngestionSkin absorption Eye Contact:•Severe eye irritation•Risk of serious damage to eyes.Skin Contact:•Causes skin irritation.•May cause defatting of the skin.•Harmful if absorbed through skin.•Can be absorbed through skin.•May cause sensitization by skin contact.Ingestion:•Irritation of the mouth, throat, and stomach.•Harmful if swallowed.•Aspiration hazard if swallowed - can enter lungs and cause damage.Material SafetyData SheetInhalation:•Causes respiratory tract irritation.•Harmful by inhalation.•May cause chemical pneumonia.•May cause sensitization by inhalation.•May cause damage to nasal and respiratory passages.•May cause pulmonary edema.Target Organ and Other Health Effects:•Causes headache, drowsiness or other effects to the central nervous system.•Kidney injury may occur.•Liver injury may occur.•UnconsciousnessThis product contains ingredients that may contribute to the following potential chronic health effects:•Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.•Possible sensitization.•Contains formaldehyde which is considered a potential carcinogen by the Occupational Health and Safety Administration.•Prolonged exposure over TLV may produce pneumoconiosis.Teratogens:•May cause birth defects.Carcinogens:•Possible cancer hazard. Contains material which may cause cancer based on animal data.•Cancer hazard. Contains material which can cause cancer.3. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTSIngredient Name CAS-No.Approx.Weight %Chemical Name CAS NumberTITANIUM DIOXIDE13463-67-725 - 30Titanium dioxide13463-67-7XYLENE 1330-20-720 - 25Xylenes (o-, m-, p-isomers)1330-20-7ISOBUTYL ALCOHOL78-83-110 - 15Isobutyl alcohol78-83-1ETHYLBENZENE100-41-41 - 5Ethyl benzene100-41-4TALC14807-96-61 - 5Talc (Mg3H2(SiO3)4)UNKNOWNTOLUENE108-88-31 - 5Toluene108-88-3If this section is blank there are no hazardous components per WHMIS guidelines.This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.4. FIRST AID MEASURES4. FIRST AID MEASURESEye Contact:In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. If medical assistance is not immediately available, flush an additional 15 minutes. Get medical attention immediately.Skin Contact:Remove contaminated clothing and shoes. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention, if symptoms develop or persist.Ingestion:Rinse mouth with water. Give one or two glasses of water. Only induce vomiting at the instruction of medical personnel. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. If vomiting occurs, keep head lower than hips to prevent aspiration. Get medical attention immediately.Inhalation:Move injured person into fresh air and keep person calm under observation. Get medical attention immediately. For breathing difficulties, oxygen may be necessary. If breathing stops, provide artificial respiration. Place unconscious person on the side in the recovery position and ensure breathing.Medical conditions aggravated by exposure:Any respiratory or skin condition.5. FIRE FIGHTING MEASURESFlash point (Fahrenheit):54Flash point (Celsius):12Lower explosive limit (%):1Upper explosive limit (%):11Autoignition temperature:not determinedSensitivity to impact:noSensitivity to static discharge:Subject to static discharge hazards. Please see bondingand grounding information in Section 7.Hazardous combustion products:See Section 10.Unusual fire and explosion hazards:Contaminated rags, wipes, saw dust, etc., may catch fire spontaneously. Store waste under water in closed metal containers or in approved self-closing containers designed to prevent spontaneous combustion until disposed of in compliance with applicable regulations. Oxidizing MaterialExtinguishing media:Carbon dioxide, dry chemical, foam and/or water fog.Fire fighting procedures:Firefighters should be equipped with self-contained breathing apparatus and turn out gear. Keep containers and surroundings cool with water spray.6. ACCIDENTAL RELEASE MEASURESAction to be taken if material is released or spilled:Ventilate the area. Avoid breathing dust or vapor. Use self-containing breathing apparatus or airmask for large spills in a confined area. Wipe, scrape or soak up in an inert material and put in a container for disposal. See section 7, "Handling and Storage", for proper container and storage procedures. Remove all sources of ignition. Soak up with inert absorbent material. Use only non-sparking tools. Avoid contact with eyes.7. HANDLING AND STORAGE7. HANDLING AND STORAGEPrecautions to be taken in handling and storage:Keep away from heat, sparks and open flame. - No smoking. Keep container closed when not in use. Do not store above 120 degrees F. (49 degrees C). Based on flash point and vapor pressure, suitable storage should be provided in accordance with OSHA regulation 1910.106, Ontario OH&S regulation 851 section 22. Empty containers may contain product residue, including flammable or explosive vapors. Do not cut, puncture or weld on or near container. All label warnings must be observed until the container has been commercially cleaned or reconditioned. If the product is used near or above the flashpoint, an ignition hazard may be present. Activities, uses, or operations which liberate vapor (such as mixing or free fall of liquids) may also present an ignition hazard. Please ensure containers and other interconnected equipment are properly bonded and grounded at all times.8. PERSONAL PROTECTIVE EQUIPMENT AND EXPOSURE CONTROLSPersonal Protective EquipmentEye and face protection:Wear chemical goggles with splash shields or face shield. Contact lenses should not be worn when working with chemicals because contact lenses may contribute to the severity of an eye injury in case of exposure.Skin protection:Appropriate chemical resistant gloves should be worn.Other Personel Protection Data:To prevent skin contact wear protective clothing covering all exposed areas. Ensure that eyewash stations and safety showers are close to the workstation location.Respiratory protection:If exposure cannot be controlled below applicable limits, use the appropriate NIOSH approved respirator such as an air purifying respirator with organic vapor cartridge and dust/mist filter. Consult the respirator manufacturer's literature to ensure that the respirator will provide adequate protection. Read and follow all respirator manufacturer's instructions. VentilationUse only in well-ventilated areas. Ensure adequate ventilation, especially in confined areas. Ovens used for curing should contain a fresh air purge to prevent vapours from accumulating and creating a possible explosive mixture. Where the product is used in a hazardous classified area, use explosion-proof electrical/ventilating/lighting/equipment.Exposure GuidelinesOSHA Permissible Exposure Limits (PEL's)Ingredient Name CAS-No.Approx.Weight %TWA (final)Ceilings limits (final)Skin designationsTITANIUM DIOXIDE 13463-67-725 - 3015 mg/m3 TWA dusttotalXYLENE 1330-20-720 - 25100 ppm TWA435 mg/m3 TWAISOBUTYL ALCOHOL 78-83-110 - 15100 ppm TWA300 mg/m3 TWAETHYLBENZENE 100-41-41 - 5100 ppm TWA435 mg/m3 TWATALC 14807-96-61 - 5Respirable. Listed.Total dust. Listed.TOLUENE108-88-31 - 5200 ppm TWA= 300 ppm Ceiling ACGIH Threshold Limit Value (TLV's)Ingredient Name CAS-No.Approx.Weight %TWA STEL Ceiling limits SkindesignationsTITANIUM DIOXIDE13463-67-725 - 3010 mg/m3 TWAXYLENE1330-20-720 - 25100 ppm TWA150 ppm STELISOBUTYL ALCOHOL78-83-110 - 1550 ppm TWAETHYLBENZENE100-41-41 - 5100 ppm TWA125 ppm STELTALC 14807-96-61 - 5 2 mg/m3 TWArespirable fraction,particulate mattercontaining noasbestos and <1%crystalline silicaTOLUENE 108-88-31 - 520 ppm TWA Can be absorbedthrough the skin.9. PHYSICAL PROPERTIESOdor:Normal for this product type.Physical State:liquidpH:not determinedVapor pressure:90.2255639 mmHg @ 77ºF (25ºC)Vapor density (air = 1.0): 3.7Boiling point:not determinedSolubility in water:not determinedCoefficient of water/oil distribution:not determinedDensity (lbs per US gallon):10.68Specific Gravity: 1.28Evaporation rate (butyl acetate = 1.0): 2.24Flash point (Fahrenheit):54Flash point (Celsius):12Lower explosive limit (%):1Upper explosive limit (%):11Autoignition temperature:not determined10. STABILITY AND REACTIVITYStability:Stable under normal conditions.Conditions to Avoid:Heat.Incompatibility:Strong oxidizing agentsHazardous Polymerization:None anticipated.Hazardous Decomposition Products:Carbon monoxide and carbon dioxide. Metal oxide fumes.Ammonia compounds. Nitrogen compounds.Sensitivity to static discharge:Subject to static discharge hazards. Please see bondingand grounding information in Section 7.11. TOXICOLOGICAL INFORMATIONIngredient Name CAS-No.Approx.Weight %NIOSH - Selected LD50s and LC50s11. TOXICOLOGICAL INFORMATIONTITANIUM DIOXIDE13463-67-725 - 30> 10000 mg/kg Oral LD50 RatXYLENE 1330-20-720 - 25= 4300 mg/kg Oral LD50 Rat= 47635 mg/L Inhalation LC50 Rat 4 h= 5000 ppm Inhalation LC50 Rat 4 h> 1700 mg/kg Dermal LD50 RabbitISOBUTYL ALCOHOL 78-83-110 - 15= 2460 mg/kg Oral LD50 Rat> 2000 mg/kg Dermal LD50 Rabbit> 6.5 mg/L Inhalation LC50 Rat 4 hETHYLBENZENE 100-41-41 - 5= 15354 mg/kg Dermal LD50 Rabbit= 17.2 mg/L Inhalation LC50 Rat 4 h= 3500 mg/kg Oral LD50 RatTOLUENE 108-88-31 - 5= 12.5 mg/L Inhalation LC50 Rat 4 h= 12124 mg/kg Dermal LD50 Rat= 636 mg/kg Oral LD50 Rat= 8390 mg/kg Dermal LD50 Rabbit> 26700 ppm Inhalation LC50 Rat 1 hMutagens/Teratogens/Carcinogens:Possible mutagenMay cause birth defects.Possible cancer hazard. Contains material which may cause cancer based on animal data. Cancer hazard. Contains material which can cause cancer.Contains ethylbenzene, which has been determined by NTP to be an animal carcinogen with no known relevance to humans. IARC has classified ethylbenzene as possibly carcinogenic to humans (2b) on the basis of sufficient evidence of carcinogenicity in laboratory animals but inadequate evidence of cancer in humans. Contains TIO2 which is listed by IARC as a possible human carcinogen (Group 2B) based on animal data. Neither long term animal studies, nor human epidemiology studies of workers exposed to TIO2 provide an adequate basis to conclude TIO2 is carcinogenic. TIO2 is not classified as a carcinogen by NTP, U.S. OSHA, or the U.S. EPA.Ingredient Name CAS-No.Approx.Weight %California Prop 65 - DevelopmentalToxicityCalifornia Prop 65 - Reproductive(Male)TOLUENE 108-88-31 - 5Listed. initial date 1/1/91 -developmental toxicityIngredient Name CAS-No.Approx.Weight %California Prop 65 - Reproductive(Female)California Prop 65 - CarcinogenETHYLBENZENE 100-41-41 - 5Listed. initial date 6/11/04 -carcinogenIngredient Name CAS-No.Approx.Weight %IARC Group 1 - HumanEvidenceIARC Group 2A - LimitedHuman DataIARC Group 2B -Sufficient Animal DataTITANIUM DIOXIDE13463-67-725 - 30Monograph 47 [1989]ETHYLBENZENE100-41-41 - 5Monograph 77 [2000]Ingredient Name CAS-No.Approx.Weight %NTP KnownCarcinogensNTP SuspectCarcinogensNTP Evidence ofCarcinogenicityTITANIUM DIOXIDE 13463-67-725 - 30male rat-negative;female rat-negative;male mice-negative;female mice-negativeIngredient Name CAS-No.Approx.Weight %NTP KnownCarcinogensNTP SuspectCarcinogensNTP Evidence ofCarcinogenicityXYLENE 1330-20-720 - 25male rat-no evidence;female rat-no evidence;male mice-no evidence;female mice-no evidenceETHYLBENZENE 100-41-41 - 5male rat-clear evidence;female rat-someevidence; male mice-some evidence; femalemice-some evidenceTALC 14807-96-61 - 5male rat-some evidence;female rat-clearevidence; male mice-noevidence; female mice-no evidenceTOLUENE 108-88-31 - 5male rat-no evidence;female rat-no evidence;male mice-no evidence;female mice-no evidenceIngredient Name CAS-No.Approx.Weight %OSHA - HazardCommunicationCarcinogensOSHA - SpecificallyRegulated CarcinogensACGIH CarcinogensTITANIUM DIOXIDE13463-67-725 - 30PresentETHYLBENZENE 100-41-41 - 5Present A3 Confirmed AnimalCarcinogen withUnknown Relevance toHumans12. ECOLOGICAL DATANo information on ecology is available.13. DISPOSAL CONSIDERATIONSDispose of waste at an approved hazardous waste treatment/disposal facility in accordance with applicable local, provincial and federal regulations.14. TRANSPORTATION INFORMATIONCanadian Transport of Dangerous GoodsProper Shipping Name:PAINTHazardous Ingredient (Land) 1TOLUENEHazardous Ingredient (Land) 2XYLENEHazard Class:3UN ID Number (msds):UN1263Packing Group:IITDG Clear Language Exceptions:For Dangerous Goods, the supplier may apply one of the following exceptions (TDG Reference): Limitedquantity/Consumer Commodity (1.17), Does not sustain combustion, etc. (2.18), Viscous liquid (2.19), Flammable liquid General Exemption (1.33) or US DOT Reciprocity (9.1,3 & 4). Please consult current TDG regulations before applying any of these exceptions to subsequent shipments.International Air Transport Association (IATA):Proper Shipping Name:PaintIATA N.O.S. Technical Name 1TOLUENEIATA N.O.S. Technical Name 2XYLENEHazard Class:3UN ID Number (msds):UN1263Packing Group:IIInternational Maritime Organization (IMO):Proper Shipping Name:PAINTIMDG N.O.S. Technical Name 1TOLUENEIMDG N.O.S. Technical Name 2XYLENEHazard Class:3IMO UN/ID Number (msds):UN1263Packing Group:II15. REGULATORY INFORMATIONINTERNATIONAL REGULATIONS - Chemical InventoriesCanada Domestic Substances List:All components of this product are listed on the Domestic Substances List.US TSCA Inventory:All components of this product are in compliance with U.S. TSCA Chemical Substance Inventory Requirements. Canada National Pollutant Release Inventory:Ingredient Name CAS-No.Approx.Weight %NPRI StatusXYLENE 1330-20-720 - 25Part 1, Group 1 SubstancePart 5 SubstancePart 1, Group 1 SubstanceISOBUTYL ALCOHOL78-83-110 - 15Part 1, Group 1 SubstanceETHYLBENZENE100-41-41 - 5Part 1, Group 1 SubstanceTOLUENE 108-88-31 - 5Part 1, Group 1 SubstancePart 5 SubstancePart 1, Group 1 Substance16. OTHER INFORMATIONHMIS CodesHealth:2*Flammability:3Reactivity:1PPE:X - See Section 8 for Personal Protective Equipment (PPE).16. OTHER INFORMATIONAbbreviations:OSHA - Occupational Safety and Health Administration, IARC - International Agency for Research on Cancer, NIOSH -National Institute of Occupational Safety and Health, NTP - National Toxicology Program, ACGIH - American Conference of Governmental Industrial Hygienists, SCAQMD - South Coast Air Quality Management District, TSCA -Toxic Substances Control Act, IATA - International Air Transport Association, IMO - International Maritime Organization, DOT - Department of Transportation, NA - Not applicable, NOT ESTAB - Not established, N.A.V. - Not available, RQ -Reportable quantity, WT - Weight, MG/CU M - Milligrams per cubic meter, G/L - Grams per liter, MM - Millimeters, MPPCF - Millions of particles per cubic foot, PPM - parts per million, PPT - parts per thousand, TCC/PM - Tag closed cup / Pensky-Martens, PB - Lead, PEL - Permissible exposure level, TWA - Time Weighted Average, STEL - Short term exposure limit, C - Celsius, F - Fahrenheit.Disclaimer:The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option. This MSDS contains additional information required by the state of Pennsylvania.Preparation Information:Prepared By:Regulatory Affairs DepartmentPrint date:03/Jun/2010Revision Date:03/Jun/2010Technical Information:The Valspar CorporationPO Box 1461Minneapolis, MN 55440Tech Info Phone:1-613-932-89601-888-345-573224-Hour Medical EmergencyPhone:。

一、高效纳米远红外节能涂料简介：集团总部位于伦敦，公司产品涉及电气、电子、石油、化工、节能、太阳能等领域, 是世界上较早从事节能产品和电能质量产品研发和生产的专业制造厂商。

上海萨梅特机电科技有限公司把节能方面的产品引进中国，全权负责萨梅特在中国市场的产品销售以及相关服务。

工业锅炉、窑炉在企业中量多面广并且使用效率低，能耗浪费严重，存在巨大的节能空间。

研发生产的高效纳米远红外节能涂料在欧美国家广泛应用于以煤、油、气、电为能源的各种工业电炉、加热炉、退火炉、热风炉、锅炉等工业锅炉、窑炉，备受推崇！萨梅特高效纳米远红外节能涂料采用全球领先的理想黑体技术（BLACKBODY MODEL），采用优质的黑度较高的材料，节能涂料的平均粒径为1.5NM左右，接近粒子的极限细化状态，是一个接近的绝对黑体模型，具有0.98的吸收率和发射率，喷涂于锅炉、窑炉炉膛受热面，可以最大程度地提高锅炉、窑炉的热效率，实现良好的节能效果，并且施工后的涂层抗结焦、抗结渣、耐酸碱、耐氧化、耐腐蚀、耐磨损，有利用锅炉、窑炉的运行安全和延长使用寿命。

二、节能原理：传热有三种方式：对流、辐射和传导，辐射是以发射电磁波传递热量，其发射量与绝对温度的4次方成正比，并且以绝对黑体发射量为最大。

通常物体与绝对黑体相比较其吸收和发射辐射热能的大小，以“黑度”来表示。

所以，为了提高炉衬耐火材料对辐射能的吸收，就必须提高其黑度。

萨梅特高效纳米远红外节能涂料采用全球领先的理想黑体技术（BLACKBODY MODEL），采用优质的黑度较高的材料，节能涂料的平均粒径为1.5NM左右，接近粒子的极限细化状态，是一个接近的绝对黑体模型，具有接近1的吸收率，根据基尔霍夫定律得知，发射率与吸收率相等，因此也具有接近1的发射率，可以最大程度地提高窑炉、锅炉的热效率，实现良好的节能效果。

工业炉内的加热，因为炉温很高，其传热方式以辐射为主。

燃料燃烧将热量以辐射的方式传递给工件及炉衬，由炉衬传递给工件的辐射热占加热工件总量的60%。

2Two-Component Spraying –made Easy and AffordableThe trend for the coatings industry is toward high solids coatings.Formulated with less solvent, these coatings reduce VOCemissions and speed production with faster cure times.The Graco XP70 Plural-Component Sprayer is designed to pump,mix and atomize high-viscosity, materials with superior results.The spray system handles:• E nvironmentally-friendly high solids coatings,with little or no solvent• Hybrid polyurethanes• Epoxies• V ery high solids coatings – up to 100% solids content• M aterials requiring heat (requires optional heaters)• F ast-curing materialsIf you spray several different materials each week, the XP70is the right choice. That’s because you can change the ratioby simply changing one or two pump lowers. Six fixed mixratios are available: 1:1, 1.5:1. 2:1, 2.5:1, 3:1 and 4:1.Applications• Tanks• Pipes• Marine/shipbuilding• Bridges• Wind towers• Railcars• Water towers• Wastewater treatment• Manhole and sewer reconditioning• Secondary containment• Structural steel• Refineries• Roof coatings3Engineered specifically for Two-Component CoatingsThe Graco XP70 Plural-Component Sprayer provides the high-pressure performance you need to spray high-viscosity, high-solids coatings. In addition, the unit is designed to maximize gravity feed, which may eliminate the need for feed pumps, saving you money.Mix Manifold• P rovides simple fluid control for mixing or flushing• A ccurately dispenses A and B fluids to the static mix tube• H andles high-solids coatings with large ports and low pressure drop • C hoose to use mix manifold remotely to reduce solvent and material wasteOutlet Manifold and Valves• Fluid pressure gauges to monitor pump output • Provides automatic overpressure relief • I ncludes circulation back to the supply for pump priming, purging, or relieving outlet pressure• A llows fluid warm-up circulation when optional heaters are usedNXT Air Motor• S tandard anti-icing feature means production won’t stop due to motor icing • M odular design for easier maintenance • R ugged body armor won’t rust or dentMaterial Hoppers• Side-mounted 26 liter (7-gallon)hoppers hold A and B components until it’stime to spray • Made of rugged polyethylene –unaffected by harsh solvents• Optimized for directpump feedCompact Cart-mounted• Designed for easy handling by one person• Can be floor mounted afterremoving wheels • Easy mounting of optionalflush pump and heatersHigh-pressure to handle High-viscosity Coatings• Rated for 500 bar (50 MPa, 7250 psi) to handleviscous materials and long hose lengthsXtreme ® Pump Lowers• Standard Severe Duty coatingon rods and cylinder maximizes wear life• Quick knockdown design and throat seal cartridges provide fast and easy maintenance• Six sizes available to providevarious fixed mix ratios• Easily change one or both lowers to getdesired mix ratio (see pg. 5)Visit and upgrade from hand-mixing today!4Visit Quick Return on your InvestmentYou’ll discover that the Graco XP70 Plural-Component Sprayer pays for itself when you switch from hand-mixing. Here’s how:Reduces material costsWith the Graco XP70, you eliminate waste and save money because you only mix as much material as you need. No more throwing away unused material at the end of the day. No more residue left over in smaller pails or cans. You can buy material in bulk as well.Saves money by using less clean-up solventOnly the parts that come in contact with mixed material must be cleaned. Instead of flushing out an entire pump system that contains mixed material, you only need to flush the static mix tube and hose to the gun. Reduced cleaning time means you save labour costs and increase uptime.Provides consistent material qualityNo more guesswork or human error in measuring means you can improve throughput, cut back on material waste, andreduce rework. Materials are proportioned by precision positive displacement pumps and mixed accurately and on-ratio at the mix manifold.Easy to operateOperators are up and running in just minutes, with a minimum amount of training time. The Graco XP70 runs right out of the box with nothing to set up.Reduces maintenance costsEngineered to proportion with two pumps instead of three, the Graco XP70 cuts preventive maintenance by at least one-third. It reduces cost of ownership because you only rebuild two pumps instead of three. Built with standard components, quick knock-down Xtreme lowers and NXT Air Motors, you use standard spare parts and repair kits that are readily available from Graco’s global network of distributors.5Typical Pay Back in less than 12 monthsCompare XP70 to hand-mixing and see how much you’ll save. XP70 provides a substantial return on investment compared to hand mixing because you throw away less mixed material, and you use less solvent. Visit to calculate an ROI for your application.XP Ratio Selection GuideAverage cost of coating per liter Amount of wasted material per day Average cost of wasted coating per dayTOTAL SAVINGS (assumes 200 working days per year)Material volume in shortened hose (assumes 3/8" hose x 15 m = 1.1 l)Average cost of wasted coating per day (F = E x A)TOTAL SAVINGS (assumes 200 working days per year) Average cost of potlife extender/reducer per literAmount of potlife extender/reducer used per day (assumes 2l solvent per 20 l)Average cost of potlife extender/reducer used per dayTOTAL SAVINGS (assumes 200 working days per year) Average cost of solvent per literMaterial volume of pump, siphon hose, siphon tube(220 cc pump + 1320 cc from siphon hose and tube)Amount of solvent used per day (N = M x 3 flush factor x L)TOTAL SAVINGS (assumes 200 working days per year)12.002.75 l 33.006.6001.10 l 13.202.6404.0016 l 64.0012.8004.001.50 l 18.003.60025.640A B C = AxB D = Cx200E FG = Fx200H I J = Hxl K = Jx200L M NO = Nx200Example is based on spraying 160 l in an 8-hour shift1:176:1Xtreme 85 (L085CO)Xtreme 85 (L085CO)173 6.5 (95)500 (7250) 6.92 (1.83)1.5:191:1Xtreme 85 (L085CO)Xtreme 58 (L058CO)144 5.5 (80)500 (7250) 5.76 (1.52)2:176:1Xtreme 115 (L115CO)Xtreme 58 (L058CO)174 6.5 (95)500 (7250) 6.96 (1.84)2.5:165:1Xtreme 145 (L14ACO)Xtreme 58 (L058CO)203 6.9 (100)448 (6500)8.12 (2.14)3:168:1Xtreme 145 (L14ACO)Xtreme 48 (L048CO)193 6.9 (100)469 (6800)7.72 (2.04)4:173:1Xtreme 145 (L14ACO)Xtreme 36 (L036CO)1816.9 (100)500 (7250)7.24 (1.91)6Technical SpecificationsXP70 Options for Added ProductivityFluid filtrationXP pump outlets ........................................................................................... 30 mesh XTR-7 Spray Gun .......................................................................................... 60 mesh Air inlet filtration ........................................................................................... 40 micron Ambient temperature rangeOperating ........................................................................... 4° to 54°C (40° to 130°F) Storage............................................................................. -1° to 71°C (30° to 160°F)Max fluid temperature ............................................................................. 71°C (160°F) Environmental rating .............................................................................Indoor/Outdoor Hazardous areas ........................................................................................... Ex II 2 G Fluid viscosity range (gravity feed hoppers) ............................ 200-20,000 cps (pourable)Higher viscosities with pump feed ........... Pump feed recommended for mix-at-the-gunapplications to pre-compress fluids Max air pressure supply to the machine .............................. 12 bar (1.2 MPa, 175 psi) Sprayer air consumption (see performance charts in 3A0420) ....... 0.56 m 3/min at 7 bar/liter/min(75 cfm at 100 psi inlet/gpm) DimensionsBare machine ............................................................................ 132 x 152 x 81.6 cm With 26 liter (7 gal) hoppers ........................................................... 132 x 152 x 89 cmWeightBare system ................................................................................................... 192 kg(No heaters, hoppers or junction box)Full system ..................................................................................................... 260 kg(Includes 2 heaters, solvent pump and empty hoppers)Air inlet connection ............................................. 3/4" npsm (f) union in 3/4" npt (f) port Fluid pump inlets (for non-hopper models) ........................................... 1-1/4" npt (m)Fluid gauge manifold “A” and “B” outlets ...................................................1/2" npt (f)Fluid gauge manifold ................................................................................ 1/4" npt (m)(combination pressure relief / circulatioin / prime) outlets back to supplyFluid mix manifold inlets .......................................................... 3/8" npt (m) ball valves Mix manifold material outlet .......................................................................1/2" npt (f)Static mix tube outlet ............................................................................... 3/8" npt (m)Wetted partsHard parts ......................... Nickel or zinc plated carbon steels, stainless steels, carbide Soft parts ................................. PTFE, UHMWPE, nylon, acetal, solvent resistant o-rings Max recommended feed pressure .............................. Less than 15% of outlet pressure Sound pressure ....................................................... 86 dBA at 7 bar (0.7 MPa, 100 psi)Sound power ........................................................... 98 dBA at 7 bar (0.7 MPa, 100 psi)Operation and repair manual (English) ............................................................ 3A0420Merkur ™ Solvent Flush Pump• Q uickly flushes mixed materials from hose and gun• P rovides enough pressure to push good paint out the mix hose with a spray pattern, resulting in less wasted material• M ounts easily to slotted holes provided on XP cart• P rime valve can be used to supply flush solvent for tip cleaning, or to flush a second hose and gun that have been removed from the tee in the mix lineViscon ® Fluid Heaters• R educes coating viscosity so it can be sprayed at lower pressure • P rovides consistent spray temperature, resulting in consistent spray pattern and better thickness control • M ounts easily to slotted holes on XP cart (requires heater mounting kit 262450)• A vailable in standard or hazardous atmosphere designRemote Mount Mix Manifold• M ix manifold on cart is removable and can be located closer to the spray gun to reduce mixedcoatings and the volume of flush solvent required - results in less wasted materials• A and B hoses from the XP cart to the mix manifold don’t need to be flushed and can be sized for less pressure loss over long runs • G reat for materials with very short pot life• U se carriage 262522 to protect mix manifold and valvesXtreme Pump Lowers• C hange one or both lowers for desired mix ratio (see page 5)• X P uses specific Xtreme pump lowers with spring-loaded inlet valves, Tuff stack packings, 30 mesh filters, and no prime valves• O ver pressure rupture protection included on 36 cc, 48 cc and 58 cc sizes• S ix sizes available to provide fixed mix ratios: 1:1, 1.5:1, 2:1, 2.5:1, 3:1, and 4:17Sprayers - All cart-mounted pump packages include material hoses and XTR -7 gun, and use an NXT 6500 Air Motor (N65DN)Pump Lowers - All Xtreme XP pump lowers include built-in filter and Tuff-Stack™ (carbon filled PTFE packings)Supply Processing EquipmentTemperature Controlling EquipmentMixing and AtomizingWater Jacketed Heated Hoses - (Approved for explosive atmospheres) 15.2 m (50 ft) sectionsXtreme-Duty ™ 500 bar (7250 psi) High-Pressure Hoses571100 1:1 Bare sprayer, no cart, no guns, no hose 571101 1:1 Cart-mounted sprayer without hoppers 571102 1:1 Cart-mounted sprayer with hoppers571150 1.5:1 Bare sprayer, no cart, no guns, no hose 571151 1.5:1 Cart-mounted sprayer without hoppers 571152 1.5:1 Cart-mounted sprayer with hoppers 571200 2:1 Bare sprayer, no cart, no guns, no hose 571201 2:1 Cart-mounted sprayer without hoppers 571202 2:1 Cart-mounted sprayer with hoppers 571250 2.5:1 Bare sprayer, no cart, no guns, no hose 571251 2.5:1 Cart-mounted sprayer without hoppers 571252 2.5:1 Cart-mounted sprayer with hoppers 571300 3:1 Bare sprayer, no cart, no guns, no hose 571301 3:1 Cart-mounted sprayer without hoppers 571302 3:1 Cart-mounted sprayer with hoppers 571400 4:1 Bare sprayer, no cart, no guns, no hose 571401 4:1 Cart-mounted sprayer without hoppers 571402 4:1 Cart-mounted sprayer with hoppersL036C0 Xtreme XP 36 lower L048C0 Xtreme XP 48 lower L058C0Xtreme XP 58 lowerL085C0 Xtreme XP 85 lower L115C0 Xtreme XP 115 lower L14AC0Xtreme XP 145 lower245866Heated hose kit (Includes diaphragm pump, fittings, tubes, mounting bracket and reservoir tank.Actual hose assembly and heater must be ordered separately.) Ref. manual 309525.245841 1/4" (6.3 mm), 500 bar (50 MPa, 7250 psi)245843 3/8" (9.5 mm), 500 bar (50 MPa, 7250 psi)245845 1/2" (12.7mm), 500 bar (50 MPa, 7250 psi)248118 Dual hose bundles, 1/2" & 1/2" (12.7 mm) 345 bar (34.5 MPa, 7250 psi)248119 Dual hose bundles, 3/8" & 3/8" (9.5 mm) 345 bar (34.5 MPa, 7250 psi)248120 Dual hose bundles, 1/2" & 3/8" (12.7 mm x 9.5 mm) 345 bar (34.5 MPa, 7250 psi)248121 Dual hose bundles, 3/8" & 1/4" (9.5 mm x 6.3 mm) 345 bar (34.5 MPa, 7250 psi)246078 Scuff Guard, 15.2 m (50 ft) braided polyester mesh. Blue 63 mm nominal diameter 246456 Scuff Guard, 15.2 m (50 ft) polyethylene clear tubing 130 mm diameterH72503 0.9 m (3 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f) H72506 1.8 m (6 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f)H72510 3.0 m (10 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f)H72525 7.6 m (25 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f)H72550 15.2 m (50 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f)H7251X 30.5 m (100 ft), 6.3 mm (1/4"), 500 bar (50 MPa, 7250 psi), 1/4" npsm (f)H73803 0.9 m (3 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H738061.8 m (6 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H73810 3.0 m (10 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H73825 7.6 m (25 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H73850 15.2 m (50 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H7381X 30.5 m (100 ft), 9.5 mm (3/8"), 500 bar (50 MPa, 7250 psi), 3/8" npsm (f)H75010 3.0 m (10 ft), 12.7 mm (1/2"), 500 bar (50 MPa, 7250 psi), 1/2" npsm (f)H75025 7.6 m (25 ft), 12.7 mm (1/2"), 500 bar (50 MPa, 7250 psi), 1/2" npsm (f)H75050 15.2 m (50 ft), 12.7 mm (1/2"), 500 bar (50 MPa, 7250 psi), 1/2" npsm (f)H7501X30.5 m (100 ft), 12.7 mm (1/2"), 500 bar (50 MPa, 7250 psi), 1/2" npsm (f)Remote Mix Manifold258989 Mix manifold, no carriage 262522 Carriage only - no mix manifold Static Mixing, 500 bar (50 MPa, 7250 psi)248927 25 pack, disposable, 1/2" (12 mm), 12 element 262478 Static mix housing, 12 mm x 127 mm (1/2" x 5")511352 Static mixer, SST, 9.5 mm x 241 mm (3/8" x 9.5")Spray Guns, 500 bar (50 MPa, 7250 psi)XTR700 XTR-7, round handle, four-finger trigger, no tip XTR701 XTR-7, round handle, four-finger trigger, flat tip XTR702 XTR-7, oval insulated handle, four-finger trigger, HD RAC tip XTR703 XTR-7, oval insulated handle, two-finger trigger, HD RAC tip XTR704 XTR-7, round handle, four-finger trigger, HD RAC tip XTR705 XTR-7, round handle, two-finger trigger, HD RAC tip Hoppers 24F376 Blue for resin side(26 liter (7-gallon) hopper kits with bracket and hardware to mount on an XP cart)24F377 Green for hardener side(26 liter (7-gallon) hopper kits with bracket and hardware to mount on an XP cart)262454 Desiccant dryer kit. Bulkhead fitting and 2-pack of cartridges for one hopper 119974 Replacement 2-pack of desiccant cartridges Pressure Monitoring kitMonitors pressure of two pump lowers and shuts down sprayer if off-pressure condition exists 262940 Kit, pressure monitor, wall power with Light-Tower 262941 Kit, pressure monitor, wall power, no Light-Tower 262942 Kit, pressure monitor, Turbine power with Light-Tower 262943 Kit, pressure monitor, Turbine power, no Light-Tower Miscellaneous 234026 Gun splitter manifold. Allows two spray guns to be individually selected and/or flushed NXT606 DataTrak conversion kit. Can be added to the NXT 6500 Air Motor for totalizer and flow rate data, and to provide runaway protection. Approved for hazardous atmospheres 24F375 Ratio check kit (see manual 3A0421 for details)Supply Pump Kits (see manual 312769 for more selections)256275 T 2 2:1 drum pump with 3/4 x 3.0 m (10 ft) fluid hose, air regulator kit,air hose, fluid strainer, ball valve and pump union256276 M onark 5:1, drum pump with 3/4 x 3.0 m (10 ft) fluid hose, air regulator kit, air hose,fluid strainer, ball valve and pump unionAgitator Kit248824 Twistork with air connection to work with feed pump kits (reference manual 310863)Solvent Flush Kit 262393M erkur 45:1. Mounts to XP cart. Includes air controls, pail siphon, prime valve and 0.9 m (3 ft) hose to mix manifold (reference manual 310863)262450H eater mounting kit. Includes hose and fittings to mount one heater on the XP cart. Two heaters can be mounted on an XP cart.Viscon Fluid HeatersApproved for explosive atmospheres 245848 Hazardous location, 120 VAC single phase, 2300 watts, 19.2 amps 245862 Hazardous location, 200 VAC single phase, 4000 watts, 20 amps 245863 Hazardous location, 240 VAC single phase, 4000 watts, 16.7 amps 246254 Hazardous location, 380 VAC single phase, 4000 watts, 10.5 amps 245864Hazardous location, 480 VAC single phase, 4000 watts, 8.3 ampsNot approved for explosive atmospheres 245867 Non-hazardous location, 120 VAC single phase, 2300 watts, 19.2 amps 245868 Non-hazardous location, 200 VAC single phase, 4000 watts, 20 amps 245869 Non-hazardous location, 240 VAC single phase, 4000 watts, 16.7 amps 246276 Non-hazardous location, 380 VAC single phase, 4000 watts, 10.5 amps 245870Non-hazardous location, 480 VAC single phase, 4000 watts, 8.3 ampsBand Heaters - Not approved for explosive atmospheres 15F028 Heater, drum, 1000 watts, 240V+32 89 770 700。

PX439XS/BK/100PX439XS/BK/250PX439XSA rigid, thermally conductive epoxy resin with excellent heat resistance and dimensional stability ApplicationKey Properties• Power supplies • Encryption devices • Security encapsulation • Deep sea electronics •High voltage capacitors• High electrical insulating characteristics • High dimensional stability • Low shrinkage• Approved to UL94 V-0• Excellent chemical & heat resistance•Does not contain halogens or heavy metalsDescription● Basic Two-component epoxy system ● Resin RX439XS ●HardenerHX439XSPhysical Data (approx. – values)Resin Hardener Mixed ColourBlack Beige Amber Amber Black Beige Specific Gravity2.16 0.96 1.96 Viscosity (mPas) @ 25°C95000200 12500Cure Schedule (150ml sample)TemperatureWorking Life(minutes)Gel Time (minutes) Light Handling(hours) Full Cure (hours) RT 40 480 36 168 60°C 20 - 8 16 80°C 10 - 4 8 100°C --24*RT is defined as 20-25°CThe above are typical values and will vary depending on the cured mass and application. Hotter temperatures may be used for faster cure but will result in higher post cure shrinkage and higher cure exotherm. Experimentation and testing is suggested to avoid side effects. For maximum properties a post cure may be required – Contact our technical service department for advice.Mix ratio by weight 8.55: 1 Mix ratio by volume4.03: 1TestResult Unit Peak Exotherm (150ml @ RT) 40 °C Shrinkage (Volume) 0.3 % Thermal conductivity 1.3 W/mK Thermal expansion30-40Operating temperature range -60 to +200 °C (application & geometry dependent ) Dielectric strength 20kV/mm Volume Resistivity 3.4 x 1012 ohm.cm Hardness90Shore D Flame retardant Approved (follow link below) UL94 V-0 Tensile strength70 MPa Deflection Temperature 145 °CCo-efficient of expansion 30 - 40 ppm/°C Loss Tangent 0.040 @ 50 Hz Permittivity4.8 @ 50 Hz Compressive strength105 MPaComparative tracking index>850 V (Method IEC 60112) Water absorption (30 days @ RT) 0.1 % Elongation at break 1-3 % Flexural strength105MPa Glass transition temperature 140 – 150 °C Tg120-145°CProcessing Typical PropertiesRoHS compliant YesUL94 V-0 /cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=QMFZ2.E76072&ccnshorttitle=Plastics+-+Component&objid=1073830268&cfgid=1073741824&version=versionless&parent_id=1073827222&sequence=1REACH (SVHC concentration) 0%PX439XS is available in Bulk, Twinpacks, kits and sets*******************************************************************.ukNot availableIt is essential for best results that the cartridge is ‘balanced’ before use to ensure correct mixing.Loading the cartridge into the gun before attaching the mixer element and pumping the gun to push a small amount of the contents forward will achieve this. Wipe the excess from the cartridge tip and add the static mixer. The cartridge is now ready for use.PX439XS/BK/050 PX439XS/BK/500PX439XS/BK/100 PX439XS/BK/1000PX439XS/BK/250Twinpacks are pre-weighed resin and hardener components contained in a tough flexible film, separated by a removable clip and rail. Once the clip and rail is removed the resin and hardener is thoroughly mixed within the bag and is immediately ready for use. Mixing will normally take ~ 3 minutes due to the viscosity; but pay special attention to the corners. Twinpacks are ideal for small to medium production runs, prototyping and on-site or field use. The twinpack weight/volume may also be tailored to a specific size on request.For further details please visit RX439XS/BK/5KG HX439XS/NC/200GRX439XS/BK/10KG HX439XS/NC/1KGRX439XS/BK/25KG HX439XS/NC/2.5KGHX439XS/NC/5KGHX439XS/NC/20KGBoth resin and hardener are supplied in 5kg, 25kg and 200ltr drums and fully evacuated and ready for use.Care should be taken to ensure when mixing the resins air is not entrained in the mixture. If this is unavoidable the mixed resin and hardener should be re-evacuated before dispensing. The bulk resin and hardener materials can be dispensed from suitable dispensing machinery and Robnor Resins produce a range of these machines, details that can be provided on request. PX439XS/BK/500GKIT PX439XS/BK/2KGSETPX439XS/BK/5KGKIT PX439XS/BK/27KGSETPX439XS/BK/10KGKITPX439XS/BK/20KGKITKits and Sets are provided in separate containers to the correct ratio.In Kit form, pour the hardener into the larger resin container and use it as a mixing vessel.Stir well using an appropriate mixer until homogeneous.Note: Incomplete mixing will be characterised by erratic or partially incomplete cure even after extended time periods.All equipment contaminated with mixed material should be cleaned before the material has hardened. TS130 is a suitable non-flammable cleaning agent, although other solvents may be found suitable. TS130 will also remove cured material provided it is allowed to soak for a number of hours.Material stored in the original unopened containers under cool dry condition between 15° and 25°C will have a shelf life of at least 18 months.Once used the containers must be kept sealed to prevent effects from water, air or contaminants.Epoxy resin systems may cause sensitisation by skin contact or inhalation may be corrosive, harmful or toxic. It is therefore strongly recommended that skin and eye contact is avoided by the using of appropriate personal protective equipment such as gloves, safety glasses or goggles and overalls. Wash any contamination from the skin immediately and thoroughly and do not eat, smoke or drink in the working vicinity.Under normal working conditions a good source of ventilation is adequate, however if the material is heated, or where vapour levels are likely to exceed the occupational exposure limits appropriate respiratory protection must be worn. Local exhaust ventilation (LEV) may be required especially for curing ovens or where large volumes of material are curing. The above is given as a guide only; please refer to RX/HX439XS Health and Safety data or our Technical Service Department for individual/specific advice.The results and information above does not constitute a specification and is given in good faith and without warranty. The information is derived from test/or extrapolations believed to be reliable and is quoted for guidance only. The product is offered for evaluation on the understanding the customer satisfies himself that the product is suitable for his intended by proper evaluation and testing.Robnor Resins LimitedHunts RiseSouth Marston ParkSwindon SN3 4TEUnited KingdomTel: +44 (0) 1793 823741Fax: +44 (0) 1793 827033Email: *****************.ukWeb: Buy Online: (UK only)PX439XS/BK/100PX439XS/BK/250。

Jotamastic Smart Pack HB Comp B液体。

产品名称产品类型应急咨询电话（带值班时间）:::企业标识:化学品的推荐用途和限制用途产品代码:34803好易涂1+1厚浆底漆 组份B产品描述:固化剂。

用于涂料 - 工业用用于涂料 - 用于专业领域佐敦涂料（张家港）有限公司中国江苏扬子江国际化学工业园南海路39号 215634电话: +86 512 58937988传真: +86 512 58937986Jotun Coatings (Zhangjiagang) Co. LtdNO.39 Nanhai Road Jiangsu Yangtze River International Chemical Industry Park,Jiangsu Province 215634 China Tel: +86 512 58937988Fax: +86 512 58937986中远佐敦船舶涂料（青岛）有限公司中国山东省青岛市高新区春阳路800号总机电话： +86-532-68689888总机传真： +86-532-66726750Jotun COSCO Marine Coatings (Qingdao) Co. Ltd.No. 800, Chunyang Road, High-tech Zone, Qingdao, P. R. China Tel: +86-532-68689888Fax: +86-532-66726750******************中国化学事故应急服务 Tel: +86 532 83889090易燃液体 - 类别 3皮肤腐蚀/刺激 - 类别 2严重眼损伤/眼刺激 - 类别 1皮肤致敏物 - 类别 1致癌性 - 类别 2危害水生环境一急性危险 - 类别 3GHS危险性类别:标签要素物质或混合物的分类根据 GB13690-2009 和 GB30000-2013警示词:危险.危险性说明:H226 - 易燃液体和蒸气。

常温固化EGA247一种低VOC含量、双组份、厚膜型、高固体份的低表面处理环氧保养涂料。

产品说明用于施工在各种底材上，包括：手工处理的锈蚀钢材，磨料喷砂清理钢材和水力喷砂清理钢材，以及完整的老化涂层上。

可为处于大气暴晒和浸渍环境中的工业结构物、沿海结构物、造纸厂、桥梁和海上结构物，提供杰出的防腐蚀保护作用。

设计用途可提供多种颜色，包含铝粉色。

半光 (铝粉是蛋壳光)82％ ± 3% (视颜色而定)干膜厚100-250微米 (4-10密耳) 相当于 湿膜厚122-305微米 (4.9-12.2密耳)在125微米干膜厚度和所述体积固体份的情况下，6.56 平方米/公升在 5 密耳干膜厚度和所述体积固体份的情况下，263 平方英尺/美制加仑允许适当的损耗系数适用于无气喷涂,空气喷涂,刷涂, 滚涂涂装数据INTERSEAL 670HS颜色光泽体积固体份典型厚度理论涂布率实际涂布率施工方法干燥时间温度表干硬干最小最大¹ 参考应用于浸水区域的数据。

对于非浸水区域，最大复涂间隔为“无限制”；参见阿克苏诺贝尔的《定义与缩略语》。

使用聚硅氧烷面漆时，最长复涂间隔时间将缩短。

关于详细情况，请向国际油漆工业涂料公司咨询。

也可提供低温版本；请参考低温版本的产品说明书自重涂间隔10°C (50°F) 8 小时32 小时32 小时 6 周¹15°C (59°F) 7 小时26 小时26 小时 4 周¹25°C (77°F) 5 小时18 小时18 小时14 天¹40°C (104°F)2 小时6 小时6 小时7 天¹A组份 36°C (97°F); B组份 56°C (133°F); 混合后 33°C (91°F)1.6 千克/升 (13.4 磅/加仑) 法规符合性数据闪点（典型）产品重量挥发性有机化合物关于更多详细资料，请见关于“产品特性”的章节2.00 磅/加仑 (240 克/升) 美国环境保护局第24号方法114 克/公斤欧共体溶剂排放指令含量1999年第13号委员会指令151 克/升中国国家标准 GB 23985第1 页，共 4页发行日期：2021/10/15Protective Coatings此产品性能取决于表面处理的程度。

LG DEBUTS ‘MATTE BLACK STAINLESS STEEL’ FINISHIN NEW SUITE OF KITCHEN APPLIANCES‘Embrace the Dark Side’ of the Kitchen with LG’s Versatile Luxe Line Combining Innovative Functionality and SmartThinQ Technology with Stunning Design ENGLEWOOD CLIFFS, N.J., Dec. 6, 2017 –LG Electronics USA today launched an exclusive line of premium kitchen appliances featuring LG’s new “Matte Black Stainless Steel” finish, combining the timeless sophistication of stainless steel with a luxe, low-gloss finish that complements any kitchen decor. Bringing understated elegance to traditional, modern and country kitchens alike, the new low-gloss finish blends beautifully with other matte finishes and provides a dramatic contrast to gloss surfaces in the kitchen.The new LG Matte Black line builds on the success of the popular black stainless steel finish pioneered by LG, and offers more options for today’s design-focused consumer who has a keen eye for superior design, performance and connectivity.“When it comes to the kitchen, it’s all in the finish, and LG again is pushing the boundaries of innovation in design and technology with our new Matte Black kitchen appliances,” said David VanderWaal, vice president of marketing for LG Electronics USA. “Not only will this finish turn heads, but LG’s new line also comes packed with advanced features and smart functionality – not to mention the reliability that American consumers expect from LG –to make consumers quite literally the masters of their own kitchen.”Looks Smart and Acts It, TooThe LG Matte Black Stainless series offers cutting-edge design that also delivers advanced functionality with features like LG PrintProof™ – a fingerprint- and smudge-resistant finish that easily wipes clean with a soft, dry cloth without the need for special cleaners or constant attention.The series is the newest addition to the company’s industry-leading offering of nearly 100 smart appliances featuring LG SmartThinQ™technology. Through the touch a button on the LGSmartThinQ app for Android and iOS devices or via simple voice commands using Google Assistant or Amazon Alexa, consumers can enjoy the benefits of smart controls –whether it’s preheating the oven while stuck in traffic to get dinner ready on time, or asking the refrigerator to make more ice before a dinner party.Innovation and Design Consumers TrustPlus, LG home appliances are consistently recognized as the industry leader in innovation, reliability and customer satisfaction. In fact, LG holds the number one spot in the coveted American Customer Satisfaction Index®*, marking its third consecutive year leading in reliability, features and performance. In the comprehensive 2017 J.D. Power Kitchen and Laundry Appliance Satisfaction Studies**, "LG has received more J.D. Power awards for Kitchen & Laundry Appliances than any other manufacturer."Meet LG Matte Black Kitchen AppliancesLG MATTE Black Stainless Steel appliances include a new refrigerator, ranges, dishwashers and microwave oven and are available now through select U.S. retailers nationwide at the following manufacturer’s sugge sted retail prices:Refrigerator: Ultra-Capacity Meets Sleek DesignDebuting in MATTE Black Stainless Steel finish, the 28-cubic-foot ultra-large-capacity 3-door French door refrigerator makes it easy to grab your go-to snacks and drinks with the LG Door-in-Door® technology, which the company pioneered. With your favorite items at your fingertips, LG Door-in-Door technology also allows consumers to reduce cold air loss, keeping food fresher, longer. This French-Door refrigerator alerts consumers if the refrigerator door is left open, while enabling consumers to ask the refrigerator to make more ice, or adjust the temperature through LG SmartThinQ app or voice commands.LG MATTE Black Stainless Steel 28-cubic-foot refrigerator (model LFXS28566M):$3,349Ranges: Professional Quality Helps You Cook (and Clean) in a FlashMake cooking dinner quicker and more sophisticated than ever before with Eve nJet™ Fan Convection technology, which preheats faster and delivers more precise cooking, allowing consumers to focus on things other than dinner. Adding to the sophisticated MATTE Black Stainless Steel finish, the gas oven boasts SmoothTouch™ glass controls and its sleek, smooth surface easily wipes clean so the range stays looking its best. The EasyClean® interior lets you clean everyday spills with just water and low heat in only 20 minutes.***∙LG MATTE Black Stainless Steel 6.3-cubic-foot electric range (model LRE3193BM):$1,149∙LG MATTE Black Stainless Steel 5.4-cubic-foot gas range(model LRG3193BM): $1,249Dishwashers: Sophisticated, High-Performance Clean – the First TimeMake post-dinner clean up a breeze with LG QuadWash™ MATTE Black Stainless Steel dishwashers, offering the ultimate in cleaning power and loading flexibility. With four spray arms, opposed to the traditional two, the Multi-Motion arms provide maximum cleaning coverage, getting dishe s clean the first time. It’s now easier than ever to load the dishes with EasyRack™ Plus – a height-adjustable third rack that provides the flexibility to fit more dishes, including extra-long stemware. The PrintProof™ MATTE Black Stainless Steel finish makes it easy to ensure the outside of the LG QuadWash is as sparkling as the dishes inside.∙LG MATTE Black Stainless Steel dishwasher (model LDT7797BM): $1,149∙LG MATTE Black Stainless Steel dishwasher (model LDTP6797BM): $1,049Microwave: Quick, Quiet and Stylish Convenience for the Modern ChefLG’s new 2-cubic-foot over-the-range microwave combines the MATTE Black Stainless Steel Finish with sleek intuitive SmoothTouch™ controls located on the front of the stylish glass door, ensuring your microwave looks just as good as your meal tastes. And with Sensor Cooking taking the guesswork out of cooking, QuietPower™ Ventilation removing steam and cooking aromas quickly and quietly, and EasyClean interior that cleans with a simple wipe,***dinner isn’t just done—it’s something to admire.LG MATTE Black Stainless Steel over-the-range microwave oven (model LMVM2033BM): $499To learn more about LG appliances visit .# # #* LG holds the number one spot in a U.S. consumer satisfaction survey among home appliance brands, according to the 2016 and 2017 American Customer Satisfaction Index® (ACSI).** LG received the highest numerical score in the respected segments of the J.D. Power 2017 Laundry and Kitchen Appliance Satisfaction Study, based on 6,241 (kitchen) and 14,745 (laundry) total responses, measuring customer opinions about their new appliance purchased in the previous 12 months, surveyed February-March 2017. Your experiences may vary. Visit . For the full J.D. Power press release and scores, visit /industry/home-improvement.*** Additional buildup may require manual effort.About the American Customer Satisfaction IndexThe American Customer Satisfaction Index (ACSI) is a national economic indicator of customer evaluations of the quality of products and services available to household consumers in the United States. The ACSI uses data from interviews with roughly 180,000 customers annually as inputs to an econometric model for analyzing customer satisfaction with more than 300 companies in 43 industries and 10 economic sectors, including various services of federal and local government agencies. More information on ACSI can be found at .About J.D. PowerJ.D. Power is a global leader in consumer insights, advisory services and data and analytics. These capabilities enable J.D. Power to help its clients drive customer satisfaction, growth and profitability. Established in 1968, J.D. Power is headquartered in Costa Mesa, Calif., and has offices serving North/South America, Asia Pacific and Europe. J.D. Power is a portfolio company of XIO Group, a global alternative investments and private equity firm headquartered in London, and is led by its four founders: Athene Li, Joseph Pacini, Murphy Qiao and Carsten Geyer.About LG Electronics USALG Electronics USA, Inc., based in Englewood Cliffs, N.J., is the North American subsidiary of LG Electronics, Inc., a $48 billion global force and technology leader in home appliances, consumer electronics and mobile communications. LG Electronics sells a range of stylish and innovative home appliances, home entertainment products, mobile phones, commercial displays, air conditioning systems and solar energy solutions in the United States, all under LG’s " “Life’s Good” marketing theme. For more news and information on LG Electronics, please visit .Media Contacts:LG Electronics USATaryn Brucia201 816 2187********************Amanda Trcka212 237 4188***********************。

Figure 1. Vermason Conductive Polyurethane Paint.DescriptionA single layer, two-component paint for a permanently conductive, abrasion and chemically resistant coating.It can be applied to new and existing PVC floors, concrete floors as well as other surfaces (check with our technical service). Resistance to earth = 103-105 ohm (as per IEC 61340-5-1).PropertiesCombination of acrylate resin with aliphaticpolyisocyanateConductivity unaffected by humidity Very low charging (<10V) walk test Semi-gloss finish Odourless when dryAvailable in colours as well as transparentOrdering InformationTECHNICAL HardenerMixture250 +/- 20 mPa.sThis data is for stone grey paint and may vary for other colours2.2Because the mixed paint has a very short usable life after mixing,worker will cover an area of approximately 80m2 in one hour with apaint roller.2.3Thoroughly stir the hardener (H40.02).2.4Thoroughly stir the conductive resin (M17.17). Check that thecolour is the one desired - grey, buff or beige.2.5Mix the hardener and the resin in a proportion of 15:100 by weight.For example: 0.9kg hardener is to be added to 6kg of resin. Thisamount of paint will cover approximately 60m2 of PVC floor.2.6The hardener must be added to the resin while being thoroughlystirred with a mechanical stirrer. Allow the mixture to stand for 2 to3 minutes before application.2.7Check that earthing facility (copper strip) is in place!2.8To improve ease of application with a roller, up to 5% by weight ofsolvent (C210) can be added to the mixture. Adding more solventdulls the paint's sheen. Matt coatings mark more easily. Ensurethat the area is well ventilated. Ensure that the area is wellventilated.2.9Apply an even coat with a short-haired (15mm or less) paint roller.Note:Some roller marks on the finished floor can occur.2.10Clean all tools immediately after use with solvent. Wear gloves:dry paint on skin is very difficult to remove.2.11For application by spraying the mixture must be diluted with 10-15% by weight of solvent (C210).3. Drying:3.1Allow at least 12 hours drying time depending on ambienttemperature before walking on the surface.Odour will be strongduring this time but will disappear once the floor is dry.3.2The surface will be fully cured and able to take full loading after tendays.4. Number of coats:4.1PVC and fine concrete floors will usually require only one coat.Coarser surfaces may require two coats to ensure electricalcontinuity.5. Testing the static dissipative floor coating5.1Connect the end of the copper tape to the building ground. Werecommend a one megohm resistor be built-in to the earth lead.5.2Resistivity measurements can be performed after 3 days.Readings will even over the area of the floor in a range from 20kto 100k at 100V test voltage.5.3An adhesion test can be performed after 8 to 10 days once thecoating is fully cured. High mechanical and chemical resistancewill also be achieved by then.SafetyIt is the responsibility of the user to provide a safe working environment and to comply with all Health and Safety Laws. Consult Vermason Material Safety Data SheetsMSDS 2A and MSDS 2B for specific information on this product.7. HANDLING AND STORAGEHandling Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtureswith air. Prevent the creation of flammable or explosive mixtures with air. Prevent the creation offlammable or explosive concentrations of vapour in air and avoid vapour concentration higher thanthe occupational exposure limits.Additionally, the product should only be used in areas from which all naked lights and other sourcesof ignition have been excluded. Electrical equipment should be protected to the appropriate standard.Preparation may charge electrostatically: always use earthing leads when transferring from onecontainer to another. Operators should wear antistatic footwear and clothing and floors should be ofthe conducting type. Keep container tightly closed. Isolate from sources of heat, sparks and openflame. No sparking tools should be used.Avoid skin and eye contact. Avoid inhalation of vapour and spray mist. Smoking, eating anddrinking should be prohibited in application area.Never use pressure to empty: container is not a pressure vessel. Always keep in containers of samematerial as the original one. Comply with the Health & Safety at Work laws.Storage Store in accordance with the regulations for storing flammable liquids VbF-Class (InflammableLiquid Regulation). Store between -20°C and 40°C in a dry, well ventilated place away from sourcesof heath and direct sunlight. Keep away from sources of ignition. Keep away from oxidising agents,from strongly alkaline and strongly acid materials.No smoking. Prevent unauthorised access. Containers, which are opened, must be carefully resealedand kept upright to prevent leakage.8. EXPOSURE CONTROL/PERSONAL EXPOSUREEngineering Measures Provide adequate ventilation. Where reasonable practicable this should be achieved by the use oflocal exhaust ventilation and good general extraction. If these are not sufficient to maintainconcentrations of particulates and solvent vapour below the OEL, suitable respiratory protection mustbe worn.Exposure Limits:Occupational exposure limit for:CAS-No Name TLV-Value1330-20-7 Xylol (o.m.p)100.0 ml/m3435.0 mg/m3100-41-4Ethylbenzol100.0 ml/m3435.0 mg/m384540-57-8Methoxypropylacetat100.0 ml/m3550.0 mg/m3108-10-14-methyl - 2-pentanon50.0 ml/m3205.0 mg/m3According to TRGS 900 (Germany)Personal Protection:Respiratory Protection When workers are facing concentrations above the exposure limit they must use appropriate certifiedrespirators.Hand Protection For prolonged or repeated contact, barrier creams may help to protect the exposed areas of the skin,they should however, not be applied once exposure has occurred.Eye Protection Use safety eyewear designed to protect against splash of liquids.Skin Protection Personnel should wear antistatic clothing made of natural fibre, or of high temperature resistantsynthetic fibre. All parts of the body should be washed after contact.9. PHYSICAL AND CHEMICAL PROPERTIESPhysical state:Liquid colour:211421442194Yellow211921492199Beige211821482198GreyOdour:solventFactor Unit MethodFlash point:20°C DIN 53213Ignition temperature:480.0°C DIN 51794Lower explosion limit: 1.1V ol.%Upper explosion limit:8.0V ol.%Steam pressure (20°C):50.0Density 20°C): 1.358g/ml DIN 53217Viscosity (23°C):200-300Solubility in water:not miscibleContent of solvents:32.7%7. HANDLING AND STORAGEPersons with a history of asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this preparation is used.Handling Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtureswith air. Prevent the creation of flammable or explosive mixtures with air. Prevent the creation offlammable or explosive concentrations of vapour in air and avoid vapour concentration higher thanthe occupational exposure limits.Additionally, the product should only be used in areas from which all naked lights and other sourcesof ignition have been excluded. Electrical equipment should be protected to the appropriate standard.Preparation may charge electrostatically: always use earthing leads when transferring from onecontainer to another. Operators should wear antistatic footwear and clothing and floors should be ofthe conducting type.Keep container tightly closed. Precautions should be taken to minimise exposure to atmospherehumidity or water; CO2 will be formed which can result in pressurisation. Care should be takenwhen re-opening partly used containers. Isolate from sources of heat, sparks and open flame. Nosparking tools should be used.Smoking, eating and drinking should be prohibited in application area.Never use pressure to empty; container is not a pressure vessel. Always keep in containers of samematerial as the original one. Comply with the Health & Safety at Work laws. Avoid skin and eyecontact. Avoid inhalation of vapour and spray mist.Storage Store in accordance with the regulations for storing flammable liquids VbF-Class (InflammableLiquid Regulation). Observe label precautions. Store between -10 C and 40 C in a dry, wellventilated place away from sources of heat and direct sunlight. Keep away from sources of ignition.Keep away from oxidising agents, from strongly alkaline and strongly acid materials as well asamines, alcohols and water.No smoking. Prevent unauthorised access. Containers, which are opened, must be carefully resealedand kept upright to prevent leakage.8. EXPOSURE CONTROL/PERSONAL EXPOSUREPersons with a history of asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this preparation is used.Engineering Measures Provide adequate ventilation. This should be achieved by the use of local exhaust ventilation andgood general extraction. Airfed protective respiratory equipment must be worn by spray operatoreven when good ventilation is provided. In other circumstances, if local exhaust ventilation and goodgeneral extraction is not sufficient to maintain concentrations of particulates and solvent vapourbelow the EOL, suitable respiratory protection must be worn.Exposure Limits:Occupational exposure limit for:CAS-No Name TLV-Value100-41-4Ethylbenzene100.0 ml/m3435.0 mg/m31330-20-7 Xylene (o.m.p)100.0 ml/m3435.0 mg/m31320-67-8Propyleneglycol monomethylether100.0 ml/m3375.0 mg/m3 According to TRGS 900 (Germany)Personal Protection:Respiratory Protection By spraying: air fed respirator.By other operations than spraying: in well ventilated areas, air fed respirators could be replaced by acombination of charcoal filter and particulate filter mask.Hand Protection For prolonged or repeated contact, barrier creams may help to protect the exposed areas of the skin,they should however, not be applied once exposure has occurred.Eye Protection Use safety eyewear designed to protect against splash of liquids.Skin Protection Personnel should wear protective clothing made of natural fibre or of high temperature resistantsynthetic fibre. All parts of the body should be washed after contact.9. PHYSICAL AND CHEMICAL PROPERTIESPhysical state:Liquid, colourlessOdour:SolventFactor Unit MethodFlash point:25C DIN 53213Ignition temperature:480.0C DIN 51794Lower explosion limit: 1.0V ol.%Upper explosion limit:8.0V ol.%Steam pressure (20 C):50.0Density 20 C): 1.070g/ml DIN 53217Viscosity (23 C):240-260Solubility in water:not miscibleContent of solvents:25.0%10. STABILITY AND REACTIVITYStable under recommended storage and handling conditions. When exposed to high temperatures, may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen as well as from hydrogen cyanide, amines, alcohols and water. Keep away from oxidising agents, strongly alkaline and strongly acid materials. Exothermic reactions occur with amines and alcohols. Preparation reacts slowly with water resulting in evolution of CO2, which produces a risk of bursting in closed containers.11. TOXICOLOGICAL INFORMATIONBased on the properties of the isocyanate components and considering toxilogical data on similar preparations, this preparation may cause acute irritation and/or sensitisation of the respiratory system leading to an asthmatic condition, wheeziness and a tightness of the chest. Sensitized persons may subsequently show asthmatic symptoms when exposed to atmospheric concentrations well below the OEL. Repeated exposure may lead to permanent respiratory disability.Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in adverse health effects including mucous membrane and respiratory system irritation, adverse health effect on kidney, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and in extreme cases, loss of consciousness. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin resulting in non-allergenic contact dermatitis and absorption through the skin. Liquid splashes in the eye may cause irritation and reversible damage.12. ECOLOGICAL INFORMATIONThere is no data available on the preparation itself.The product should not be allowed to enter drains or water courses.13. DISPOSAL CONSIDERATIONSDo not allow into drains or water courses.Residues in empty containers should be neutralised with decontaminant (see cleaning procedure page 2). Wastes and emptied containers should be disposed of according to local regulations.14. USER’S RESPONSIBILITYThe supplier cannot anticipate all conditions of handling and use of this product and therefore cannot accept responsibility for results obtained by the application of this information, of the safety and suitability of the product either alone or in combination with other products. It is the responsibility of the user to handle in a safe workplace, using the Health & Safety information contained herein as a guideline. The supplier cannot accept any liability for damage or loss incurred from improper handling and use of this product.。

FSCFlexible Silicone CoatingProduct DescriptionFSC is fast drying and is designed to protect printed circuit boards, particularly those exposed to high humidity environments. Based on a high quality silicone resin, FSC exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range.Features•Fluoresces under UV light for ease of inspection.•Wide operating temperature range and resistant to mould growth.•Can be soldered through without fear of highly toxic gases being produced (contains no isocyanates).•Non-corrosive to Cadmium and Zinc plate (contains no phenols).•Cured coating can be removed with Electrolube Ultrasolve (ULS).•Excellent Dielectric propertiesApprovals RoHS Compliant (2002/95/EC): YesliquidLiquid Properties Appearance:translucentClearSpecific Gravity (Density) @ 20°C: 1.05 (Bulk) g/ml(Bulk)Content:50%VOC(Bulk)Solids50%content:Viscosity @ 20°C: 550 Centipoise (Bulk)minutes10-15TouchDry:Recommended Drying Time: 24 Hours @ 20°C4 Hours @ 60°C2 Hours @ 90°CCoverage @ 25µm:15m2 per litre (Bulk)ColourlessDry Film Coating Colour:+125°Cto-50°CTemperatureRange:OperatingSelf-extinguishingFlammability:Thermal Cycling (MIL-1-46058C): Meets approvalCoefficient of Expansion: 150ppmkV/mmStrength:80Dielectric2.7Constant:DielectricInsulation Resistance: 1 x 1020 Ohms/cmDissipation Factor @ 100Hz @ 25°C 0.001Moisture Resistance (MIL-1-46058C): Meets approvalSalt Spray (ASTM B117-03) Meets approvalElectrolube, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0ANPackaging Description Order Code Shelf LifeFSC Conformal Coating 400ml Aerosol FSC400 24 MonthsFSC05L 36BulkMonthsLitre5DCT01L 36Months1LitreNon-Acrylic ThinnersDCT05L 36MonthsLitre5ULS200D 36MonthsAerosolRemoval Solvent 200mlMonthsULS400D 36Aerosol400mlULS01L 72MonthsBulkLitre1BulkMonthsULS05L 72Litre5ULS25L 72MonthsLitre25BulkDirections For UseFSC can be sprayed, dipped or brushed. The thickness of the coating depends on the method of application (typically 25 microns). Temperatures of less than 16°C or relative humidity in excess of 75% are unsuitable for the application of FSC. As is the case for all solvent based conformal coatings, adequate extraction should be used (refer to MSDS for further information).Substrates should be thoroughly cleaned before coating. This is required to ensure that satisfactory adhesion to the substrate is achieved. Also, all flux residues must be removed as they may become corrosive if left on the PCB. Electrolube manufacture a range of cleaning products using both hydrocarbon solvent and aqueous technology. Electrolube cleaning products produce results within Military specification.Spraying – BulkFSC needs to be diluted with the appropriate thinners (DCT) before spraying. The optimum viscosity to give coating quality and thickness depends on the spray equipment and conditions, but normally a suitable spray viscosity is typically 50-80 centipoise. If bulk coating material has been agitated, allow to stand until air bubbles have dispersed.FSC is suitable both for use in manual spray guns and selective coating equipment.The selected nozzle should enable a suitable even spray to be applied in addition to suiting the prevailing viscosity. The normal spray gun pressure required is 274 to 413 kPa (40 - 60 lbs/sq.inch). After spraying, the boards should be placed in an air-circulating drying cabinet and left to dry.Spraying - AerosolWhen applying FSC in aerosol form care must be taken to ensure the can is not shaken before use. Shaking the can will introduce excessive air bubbles and will give a poor coating finish.The can should be held at 45°, and 200mm from the substrate to be coated. The valve should then be depressed when the can is pointing slightly off target and moved at about 100mm / second across the target. To ensure the best coating results are achieved try to use a smooth sweeping motion with small overlap for successive rows.To ensure penetration of the coating beneath the components and in confined spaces, spray the assembly from all directions to give an even coating. After spraying, the boards should be placed in an air-circulating drying cabinet and left to dry.Electrolube, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0ANDip CoatingEnsure that the coating material in the container has been agitated thoroughly and has been allowed to stand for at least 2 hours for all the air bubbles to disperse.Non acrylic conformal coating thinners (DCT) should be used to keep the FSC coating at a suitable viscosity for dipping. DCT is added periodically as the solvent evaporates. The viscosity should be checked using a viscosity meter or "flow cup".The board assemblies should be immersed in the FSC dipping tank in the vertical position, or at an angle as close to the vertical as possible. Connectors should not be immersed in the liquid unless they are very carefully masked. Electrolube Peelable Coating Mask (PCM) is ideal for this application.Leave submerged for approximately 10 seconds until the air bubbles have dispersed. The board or boards should then be withdrawn slowly (1 to 2 Seconds / mm) so that an even film covers the surface. After withdrawing, the boards should be left to drain over the tank or drip tray until the majority of residual coating has left the surface.After the draining operation is complete, the boards should be placed in an air-circulating drying cabinet and left to dry. BrushingEnsure that the coating material has been agitated thoroughly and has been allowed to settle for at least 2 hours. The coating should be kept at ambient temperature.When the brushing operation is complete the boards should be placed in an air-circulating drying cabinet and left to dry. InspectionFSC contains a UV trace, which allows inspection of the PCB after coating to ensure complete and even coverage. The stronger the reflected UV light, the thicker the coating layer is.Copyright Electrolube 2007All information is given in good faith but without warranty. Properties are given as a guide only and should not betaken as a specification.Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product.Electrolube, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN。