TH-S560BAudio Home Theater System Soundbar With Wireless SubwooferBluetooth SIG, Inc. and any use of such marks by AJS Electronics Limited is under license. Other trademarks and trade names are those of their respective owners.by E & S International Enterprises, Inc. “JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license."NOTE: For Spanish and French Manual, please visit /supportNOTA: Para el Manual de Español y Francés, por favor visite /support REMARQUE: Pour l’espagnol et Français manuel,s’il vous plaît visitez/supportIC: 26551-AT212560BIC: 26551-AT212S560BFCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment.The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a été évalué à répondre général rf exposition exigence.pour maintenir la conformité avec les directives d'exposition du RSS-102-Radio Fréquence (RF). ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.Supplier’s Declaration of ConformityModel No. TH-S560BTrade Name: JVCResponsible Party: Russell Distribution CompanyAddress: 7801 Hayvenhurst Avenue, Van Nuys, Ca 91406 USATelephone No. 888-582-8870Contact Information: https://Warning Caution:Notice:Unpacking and Set Up Protect Your Furniture Power SourceUSB PORT: Audio input from a USB storage device.Upgrade software of this product.OPTICAL: Connect to an optical audio output on TV or digital devices.511124 1. LED Subwoofer indicator: It indicates pairing and paired between the soundbar and the subwoofer. (Make sure that both soundbar and subwoofer are connected to the power supply at the same time, and then switch on sound bar and subwoofer.)2. WPS Button: It automatically pairs the sound bar with subwoofer. Press and hold it to reset the connection between the sound bar and subwoofer.3. USB Port (CAN'T PLAY MP3 MUSIC, FOR SOFTWAREUPGRADE ONLY)4. AC IN (Connect to the power supply.)Note:Software upgrading Soundbar Upgrade Subwoofer upgrade2. Pair button: long-press pair button more than 2 seconds to conect and disconect last device. short-press pair button, the display will be shown “Surround e ectiveness will only work when the signal source is from a Dolby Atmos device”, it is indicated that the surroundshown “OFF3. VOL+: to increase the volume.4.Previous button: Skip to the previous track in USB & BT mode.5. VOL-: to decrease the volume.7. Treble-up button: to increase the treble volume.8. Treble-down button: to decrease the treble volume.10. Source input button: to select an input source for playback:ARC: sound from connected HDMI ARC deviceHd 1: sound from connected HDMI 1 portHd 2: sound from connected HDMI 2 portbLUE: sound from connected Bluetooth drive.AUX: sound from connected Auxiliary Line-inUSb: sound from connected USB driverOPTI: Sound from connected Digital Optical device.11.Next button: Skip to the next track in USB & BT mode.12.Play/Pause button: Start, pause or resume play in USB & BT mode.Reset button: Press and hold the button more than 2 seconds to restore factory default settings.15. Bass+ button: To increase the bass. 16. Bass- button: To decrease the bass.Risk of explosion if the battery is replaced by an incorrect type Handling the batteryHandling the Remote ControlPlease noteMount the unit on a wallPower ON and OFF3. After 10 seconds with no input the screen will go black. Pressing the power or increasing/decreasing the volume on either the remote or soundbar will wake up the screen.What you needINPUTTH-S560B4. Select and play audio files or music on your Bluetooth device.• During play, if a call is coming, music play is paused. Play resumes when the call ends• If your Bluetooth device supports AVRCP profile, on the remote control you can press / to skip to a track,or short-press to pause/ resume play; Press and hold the RESET button more than 2 seconds to restore factory default settings; Hold Pair button on the remote control for more than 2 seconds to disconnect paired BT device or connect back last disconnect BT device.5. You can use the volume buttons on the sound bar or on the remote controller to adjust the volume to your requirements6. To exit Bluetooth, select other relevant input source.• When your switch back to Bluetooth mode, Bluetooth connection remains active.7. Press the VOL +/– buttons to adjust the volume to your desired level.N otes:• Having connection problems? Remove TH-S560B from your device's Bluetooth history and ensure it’s lessthan 8 meters away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your sound bar.• If your pairing device or connected device is switched off or manual disconnected, the sound bar willautomatically enter pairing mode.•The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall,metallic casing that covers the device, or other devices nearby that operate in the same frequency.• If you want to connect your Soundbar with another Bluetooth device, press and hold Pair on the remote controlto disconnect the currently connected Bluetooth device.13VOL +/–Playing Audio via Audio input(Aux)Connection Note:Optical Mode. .VOL +/–Connect to HDMI (ARC) SocketOption 1: ARC (Audio Return Channel)VOL +/–Option 2: Standard HDMITIPS: (OPTICAL / HDMI ARC / HDMI 1 / HDMI 2 / DOLBY ATMOS)BluetoothAudio18Select predefined sound modes to suit your video or musicMovie/Music/News/3D:Select Equalizer (EQ) Effect•The Soundbar will still function when connected via other methods (such as a Digital Optical cable) but these a re unable to support all of the Dolby features. Given this, our recommendation is to connect via HDMI, in order to ensure full Dolby support.Note:1. To use Dolby Atmos in HDMI 1 /HDMI 2 / HDMI ARC mode, your TV has to support Dolby Atmos.2. Make sure that “No Encoding” is selected for bistram in the digital audio output of the connected external device (e.g. Blu-ray DVD Player, etc.)3. While entering Dolby Atmos / Dolby Digital Plus format, the soundbar will show Dolby Atmos.4. Set the audio output sampling rate to 192 kHz if you can adjust it. Then you can play wish supports 4K video signal, the signal can be delivered to your TV. Supports the pass-through function of 4K and Dolby vision signals.Dolby Atmos ® transport you from the ordinary into the extraordinary with breathtaking, moving audio that fills your room and flows above and around you. Dolby Atmos® gives you amazing experience you have never hear before by overheard sound, and allthe richness, clarity and power of Dolby Sound.Dolby Atmos ® is only available in HDMI IN and HDMI OUT (ARC) mode. For details of the connection,please refer to “HDMI Connection”.Adjust the Volume TREB+ / TREB-T +5 T –5Adjust the Bass/Treble LevelPackage Contents20This product is manufactured, distributed, serviced and warranted exclusively by E & S International Enterprises, Inc.“JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.T o obtain a warranty service, please call 1 (888) 582-8870 or send an email to*****************Claims and Dispute ResolutionRUSSELL DISTRIBUTION COMPANY, LLC AND YOU AGREE THAT ALL CLAIMS OR DISPUTES ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT, WHETH- ER BASED IN CONTRACT, TORT, STATUTORY, FRAUD, MISREPRESENTATION OR ANY OTHER LEGAL THEORY, AND ALL CLAIMS THAT ARE SUBJECT OFA PURPORTED CLASS ACTION LITIGATION THAT YOU ARE NOT A MEMBER OF THE CERTIFIED CLASS, SHALL BE RESOLVED THROUGH ARBITRATION AS PROVIDED FOR HEREIN, OR IN SMALL CLAIMS COURT, AND NOT BY A TRIAL BY JURY. YOU WAIVE THE RIGHT TO A TRIAL BY JURY, AND WAIVE THE RIGHT TO PARTICIPATE IN CLASS ACTIONS ARISING FROM OR RELATING TO ANY AND ALL CLAIMS AND DISPUTES WITH Russell Distribution. YOU AGREE THAT YOU MAY ARBITRATE CLAIMS AGAINST Russell Distribution ONLY IN YOUR INDIVIDUAL CAPACITY AND NOT AS A PLAINTIFF, A CLASS REPRE- SENTATIVE, OR CLASS MEMBER IN ANY CLASS OR REPRESENTATIVE PROCEEDING. THIS AGREEMENT EVIDENCES A TRANSACTION IN INTERSTATE COMMERCE, AND THUS THE FEDERAL ARBITRATION ACT GOVERNS THE INTERPRETATION AND ENFORCEMENT OF THIS PROVISION. THIS PARAGRAPH SHALL SURVIVE THE TERMINATION OF THIS LIMITED WARRANTY.RUSSELL DISTRIBUTION REQUIRES THAT YOU ARBITRATE YOUR CLAIMS AGAINST RUSSELL DISTRIBUTION PURSUANT TO THE ARBITRATION DESCRIBED BELOW PRIOR TO YOUR EXERCISE OF YOUR RIGHTS PURSUANT TO TITLE I OF THE MAGNUSON-MOSS WARRANTY ACT. TITLE I OF THE MAGNUSONMOSS WARRANTY ACT DOES NOT REQUIRE YOU TO PURSUE RIGHTS AND REMEDIES AVAILABLE TO YOU THAT ARE NOT PROVIDED BY TITLE I OF THE MAGNUSON- MOSS WARRANTY ACT.Any such arbitration shall not be combined or consolidated with a claim or dispute involving any other person's or entity's product or claim or dispute, and specifically, without limitation of the foregoing, shall not under any circumstances proceed as part of a class action or class arbitration. If you intend ****************************************************************************************, at least thirty (30) days in advance of initiating the arbitration. The notice must include: (i) a description of your claim and the basis of the dispute; and (ii) a description of the relief you are seeking. If Russell Distribution and you do not reach an agreement to resolve the claim within thirty (30) days after Russell Distribution receives your notice, you or Russell Distribution may commence an arbitration proceeding.The arbitration will take place in Los Angeles, California or a mutually agreed upon location. Arbitration shall be administered by JAMS, or alternatively a mutually agreed upon arbitrator or arbitration service, under the applicable commercial arbitration rules for JAMS or the mutually agreed upon arbitration service, excluding any rules or procedures governing or permitting class actions. The arbitrator, and not any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising out of or relating to the interpretation, applicability, enforceability or formation of this Limited Warranty, including, but not limited to any claim that all or any part of this Limited Warranty is void or voidable, or whether a claim is subject to arbitration. The arbitrator shall be empowered to grant whatever relief would be available in a court under law or in equity. The arbitrator's award shall be written. and binding on the parties and may be entered as a judgment in any court of competent jurisdiction. To the extent the filing fee for the arbitration exceeds the cost of filing a lawsuit; Russell Distribution will pay the additional cost. The arbitration rules also permit you torecover attorney's fees in certain cases. The parties understand that, absent this mandatory provision, they would have the right to sue in court and have a jury trial. They further understand that, in some instances. the costs of arbitration could exceed the costs of litigation and the right to discovery may be more limited in arbitration than in court.This arbitration provision also applies to claims and disputes by you, the purchaser of the Product. and all those in privity with you, including your family members, beneficiaries and assigns against Russell Distribution subsidiaries and affiliates and any person or entity that licensed, supplied, sold or distributed the Product and each of their officers, employee, representatives, licensors/licensees, Agents, beneficiaries, predecessors in interest, successors, and/or assigns. You may opt out of this dispute resolution procedure by providing notice to Russell Distribution no later than thirty (30) calendar days after the date of the first consumer purchaser's purchase of the Product. To opt out you must send notice by*************************.Theopt-outnoticemustinclude(a)yourname,emailaddress.mailing address and phone number; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the Serial Number. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the benefits of the Limited Warranty. If you opt-out of these arbitration provisions, Russell Distribution also will not be bound by them.TH-S560BAudio Home Theater System Soundbar With Wireless Subwoofer。
