斯维尔三维手册2014

SIMATICInformation Server 2014 SP3 SIMATIC 信息服务器系统手册07/2019法律资讯警告提示系统为了您的人身安全以及避免财产损失，必须注意本手册中的提示。

人身安全的提示用一个警告三角表示，仅与财产损失有关的提示不带警告三角。

警告提示根据危险等级由高到低如下表示。

危险表示如果不采取相应的小心措施，将会导致死亡或者严重的人身伤害。

警告表示如果不采取相应的小心措施，可能导致死亡或者严重的人身伤害。

小心表示如果不采取相应的小心措施，可能导致轻微的人身伤害。

注意表示如果不采取相应的小心措施，可能导致财产损失。

当出现多个危险等级的情况下，每次总是使用最高等级的警告提示。

如果在某个警告提示中带有警告可能导致人身伤害的警告三角，则可能在该警告提示中另外还附带有可能导致财产损失的警告。

合格的专业人员本文件所属的产品/系统只允许由符合各项工作要求的合格人员进行操作。

其操作必须遵照各自附带的文件说明，特别是其中的安全及警告提示。

由于具备相关培训及经验，合格人员可以察觉本产品/系统的风险，并避免可能的危险。

按规定使用 Siemens 产品请注意下列说明：警告Siemens 产品只允许用于目录和相关技术文件中规定的使用情况。

如果要使用其他公司的产品和组件，必须得到 Siemens 推荐和允许。

正确的运输、储存、组装、装配、安装、调试、操作和维护是产品安全、正常运行的前提。

必须保证允许的环境条件。

必须注意相关文件中的提示。

商标所有带有标记符号 ® 的都是 Siemens AG 的注册商标。

本印刷品中的其他符号可能是一些其他商标。

若第三方出于自身目的使用这些商标，将侵害其所有者的权利。

责任免除我们已对印刷品中所述内容与硬件和软件的一致性作过检查。

然而不排除存在偏差的可能性，因此我们不保证印刷品中所述内容与硬件和软件完全一致。

印刷品中的数据都按规定经过检测，必要的修正值包含在下一版本中。

个三角形→画一个三角形顶点到盘中心的线（作为扫描路径线）→拉伸扫描（三角形为轮廓线）拉伸切除多余部分（两个方向完全贯穿）→圆周阵列（选择扫描特征、切除特征和据新华社电特征）12个→旋转阶梯轴→圆角（变半径、外缘5、内缘3）→外圆圆角5。

图67 图68图67提示：画中心杆（中心）轨迹→建立两个基准面→画圆草图→扫描中心杆（薄壁特征）在一个基准面上拉伸带孔方板→在另一个基准面上拉伸另一个方板。

图68提示：绘缺点3D封闭曲线→建立基准面→画圆草图→扫描。

图69 图70图69提示：画弯管中心轨迹→建立基准面→画圆草图→扫描弯管→拉伸法兰。

图70提示：旋转主体→生成筋板→切孔→倒角。

图71 图72图71提示：拉伸两端圆柱（两侧对称）→拉伸中间杆（两侧对称）→圆角→倒角。

12图72提示：旋转轴→建立基准面→切除键槽。

图73 图74图73提示：旋转主体→切横孔→切阶梯孔。

图74提示：旋转主体→切孔。

图75 图76 图75提示：旋转。

图76提示：拉伸侧板→拉伸底板→拉伸圆柱→盘板→切孔。

图77 图78图77提示：拉伸底板→建立基准面→拉伸斜圆柱→切孔。

图78提示：拉伸底板→拉伸上部→抽壳→拉伸法兰→切孔。

3图79 图80图79提示：旋转→切孔。

图80提示：拉伸底板→拉伸底板凸台→拉伸圆柱→拉伸侧圆柱→切中孔→切横孔→切底板孔。

图81 图82图81提示：拉伸中间圆套→切键槽→旋转一个手把→阵列。

图82提示：拉伸大板→拉伸半圆体→旋转中间圆柱→拉伸小板→切中孔→切方槽。

图83 图84图83提示：右侧板→拉伸侧圆柱→切侧圆柱孔→拉伸上板→拉伸上小板体→切小板中间部分→切小板孔→拉伸上圆柱→切上圆柱孔。

图84提示：拉伸主体→拉伸底板→拉伸上沿→拉伸一侧轴承座圆柱→加筋板→拉伸固定板→切轴承孔→切轴承压盖孔→镜象另一半→切底板孔→切连接孔→生成分隔线→拔模固定板。

4图85 图86图85提示：拉伸主体→圆角主体→抽壳主体→拉伸底沿→拉伸侧固定板→拉伸一侧轴承座→切一侧轴承孔→拉伸固定板→拔模固定板→加轴承压盖孔→加筋板→镜象另一半→拉伸顶部圆柱→切顶部小孔→切底板孔。

首先，单击设置焦点
象相关联，对象移动，焦点也相应移动。

要设置无对象关联的
图17-16　焦点可视
模式：定义了几种模式的灯光效果，包括柔和、中度、金属和重金属等。

创建：创建灯光，灯光中包含有聚光灯、定向光源和定位光源。

是否为每像素显示。

选中此选项将提高显示的效果，17-17
像素不可用像素可用
图17-17　像素
4．地面
地面命令可以调节地面对象，利用地面可以为场景添加深度和真实性。

地面命令的具体效果可以通过单击各个命令进行查看。

5．需要时
需要时面板仅包含高质量命令
高质量：使用此命令可以为视图创建高质量的图形。

也可以直接按A键，执行此命令。

17.2.4　作者
在“作者”选项卡中，提供了各种协同对象的创建和编辑的命令，包含有工具、标记、面板、。

Please send feedback on this guide to: **************************************Introduction (2)Installation (4)Uninstalling the Service Pack (4)Primary issues resolved by the Service Pack (5)1.Freedom (5)2.API / SDK (5)3.Core functionality (5)4.Interoperability (5)5.Clash Detective (5)6.Quantification (6)7.Autodesk ReCap (6)8.TimeLiner (6)10. Graphics (6)Thanks for downloading Autodesk® Navisworks® 2014 Service Pack 1. This document provides a quick summary of the new features and enhancements that are included in our Service Pack.Please remember to fully review the Installation Readme document before installing the Service Pack.We want to express our appreciation to all our customers who identified the issues we have addressed in this Service Pack release. Their reports gave us the opportunity to improve the product and to provide you with the best solution. We also thank you for your continued business, and for your feedback about this release.Many thanks,We strongly recommend that you read the Installation Readme document before you apply the Autodesk Navisworks Service Pack 1 to your productDuring installation, you may be prompted for the original installation media or a network image. In order to apply this Service Pack, you must have administrative privileges to install and uninstall products.After installing Autodesk Navisworks 2014 Service Pack 1, you must ensure that other users who share your Navisworks 2014 NWF files also install the same Service Pack. Failure to do so may mean that your Selection Set data becomes corrupted. This applies to Navisworks 2014 only. Navisworks 2014 NWF files shared with Navisworks 2013 and Navisworks 2012 users are not affectedOnce installed, Autodesk Navisworks 2014 Service Pack 1 cannot be uninstalled on its own. You must uninstall the complete product and then reinstall the original release of Autodesk Navisworks 2014 in order to revert to a non-Service Pack state. This applies to Navisworks 2014 only.Autodesk Navisworks Service Pack 1 provides the following fixes and enhancements:Added Autodesk ReCap support to Autodesk Freedom 2014Crash when opening a new model after using an incorrect SQL statement for an embeddeddatabase .Net APICrash caused by model refreshNWC files are created repeatedly when opening or appending native Revit models in NavisworksThe Memory Limit global option was using the wrong limit for any value greater than 4096MBPath matching fails if a new version of a file has had GUIDs added. Customers were reportingTimeLiner losing explicit selection between Navisworks 2014 and Navisworks 2014Cancelling model streaming could result in a situation where you could not subsequently open thesame fileSome properties could be reported incorrectly after appending models with different file units andsaving to NWDCrash when signing out of Autodesk 360Crash if Navisworks could not write information about the ribbon state due to user permissionsCrash when working with DWGs in Navisworks 2014. These issues were reported via theCustomer Error Reporting (CER) systemColours in some IFC models were being displayed differently in Autodesk Navisworks 2014 whencompared to other products providing IFC support. We have also added support for IFCmaterialsSwitchback to Inventor was not highlighting the appropriate selection when a composite groupnode was selected to switch back from in Autodesk Navisworks 2014.Added support for big endian JT files to Autodesk Navisworks Manage 2014 and AutodeskNavisworks Simulate 2014A number of issues around DGN native file readingIssue where Autodesk Navisworks 2014 NWC exporter from Revit was missing elements for wallsIssue where the Autodesk Navisworks 2014 NWC exporter from Revit would not export if youhave activated the View Template in the 3D viewIssue where clashing parametric primitives could give false negativesA number of issues around object identity, which means clash result status is preserved when areferenced model is updatedCrash in Autodesk Navisworks 2014 on Grouping Clash Results Containing Multiple ObjectsCrash when working with Clash Results. These issues were reported by customers via theCustomer Error Reporting (CER) systemCrash when loading a workspace while Clash Select tab is activeCrash when clicking on the title of grid column when trying to change clash statusIssue where Saving the Clash Viewpoint fails if user has not navigated in the modelIssue with auto-update on deleting a clash saved viewpoint will immediately generate a savedviewpoint for the default viewIssue where a message box stating "Redline requires a saved viewpoint..." if the Display Settings> Viewpoint > Manual is setIssue where using the Explode Group command in Clash results (when applied to multipleselection positions) results in all exploded items being collected together. We fixed this issue so that the exploded items are shown in the position of the group they belonged toIssue where the formula could not accept formula=if(true,,) and if(true,)Crash when choosing to Use New Master resourceA German Locale-specific issue where properties were not being mapped correctly afterperforming a Take OffIssue where the current selection was being reset to the first row each time a formula cell wasdeletedCrash when performing a Takeoff and running the command Delete Takeoff , if the user had usedthe column header to select allA number of positioning / rotation issues when opening Reality capture modelsAdded Autodesk ReCap support to Autodesk Navisworks Freedom 2014Issue where an un-mapped Display ID would map to the Start Date field automatically (CSV Link)Crash when clicking the cancel button on the 'working' dialog (when finding attached items inTimeLiner)Issue where pressing the Help button on the PMDB DS Login screen locks Autodesk Navisworks2014Crash when refreshing a linked schedule and then going to the Task paneIssue where overlay text won't be displayed in simulations when Autodesk Render is selected insimulation settingsFile locking issue where Asta projects could not be connected to in Autodesk Navisworks 2014 ifthey are open in Asta first.Issue when opening an Asta project in Autodesk Navisworks 2014 and then performing updatesin Asta would cause the synchronisation in Autodesk Navisworks 2014 to failCrash when selecting a steering wheel for navigationSignificant performance improvements when using Autodesk RenderingIssue where exporting a TimeLiner simulation using Autodesk Rendering results in an empty setof JPEGs.Issue where the pre-processing was hanging when exporting an image with Autodesk Renderingafter performing an interactive Ray Trace.A number of Ray Trace related crashes reported by customers via the Customer Error Reporting(CER) systemA number of lighting related crashes reported by customers via the Customer Error Reporting(CER) system.。

图17-22　标注“样式”选项卡允许查看样式库、为角色应用样式以及为角色定制样式。

使用样式工作间创
图17-23 “样式”选项卡
样式是显示对象属性的集成。

在属性面板上的所有可用属性都可以应用样式，如3D箭头在样式里能够设置颜色、不透明度等。

其实，样式是经常使用的，每一个对象可能都会创建_Default样式。

当创建一个新对象时，那么样式就可以应用到新对象。

样式面板中的命令如下：
自动定制：样式改变时，应用样式到所选对象和更新的对象。

自动给新对象制定样式。

17.2.6　变换
图17-24 “变换”选项卡。

BIM—三维算量For Revit快速入门手册V1.0版本2015年3月发行深圳市斯维尔科技有限公司第一章软件安装指南一、配置环境软件在运行过程中，有大量的数据进行处理。

特别是在进行分析统计时如果您的计算机硬件配置过低，则会用上很长的时间，甚至会出现计算机停止运行现象。

推荐配置如下：系统环境：采用win7以上系统软件环境：推荐使用Revit2014、Revit Architecture2014、Revit 2015、Revit Architecture2015版本。

CPU：推荐使用Intel Core i3以上内存：推荐使用2.0GB内存以上说明：Revit升级至最新版本，推荐更新至update2。

Revit升级补丁包步骤，升级前请先查看Revit关于对话框版本号：Revit信息Revit2014更新包下载地址：/support/revit-products/dow nloads/caas/downloads/content/revit-2014-update-release-2.ht mlRevit Architecture2014更新包下载地址：/support/revit-products/dow nloads/caas/downloads/content/revit-architecture-2014-update-release-2.htmlRevit2015（包含Revit Architecture2015）Update Release5升级步骤：1、安装UR3或UR4（如果已经安装，请跳过该步骤）UR3适用于：原始版本(Build:20140223_1515)Update Release1(Build:20140322_1515)Update Release2(Build:20140323_1530)Revit/support/revit-products/dow nloads/caas/downloads/content/autodesk-revit-2015-update-rel ease-3.htmlArchitecture/support/revit-products/dow nloads/caas/downloads/content/autodesk-revit-architecture-201 5-update-release-3.htmlUR4适用于：原始版本(Build:20140223_1515)Update Release3(Build:20140606_1530)Revit/support/revit-products/dow nloads/caas/downloads/content/autodesk-revit-2015-update-rel ease-4.htmlArchitecture:/support/revit-products/downloads/caas/downloads/content/autodesk-revit-arc hitecture-2015-update-release-4.html2、安装UR5UR5适用于：Update Release3(Build:20140606_1530)Update Release4(Build:20140903_1530)Revit:/support/revit-product s/downloads/caas/downloads/content/autodesk-revit-2015-upda te-release-5.htmlArchitecture:/support/revit-products/downloads/caas/downloads/content/autodesk-revit-arc hitecture-2015-update-release-5.htmlUR5For Revit2015R2(Build:20140905_0730)：Revit:/support/revit-product s/downloads/caas/downloads/content/autodesk-revit-2015-upda te-release-5-for-revit-2015-r2.htmlArchitecture:/support/revit-products/downloads/caas/downloads/content/autodesk-revit-arc hitecture-2015-update-release-5-for-revit-architecture-2015-r2.h tml二、软件的安装启动安装程序，软件将为用户提供安装向导，按照提示操作即可（如需修改安装路径，按照提示选取放置位置）。

SolidWorks是一款由达索系统公司开发的三维计算机辅助设计软件，主要应用于工程领域的产品设计和机械设计。

SolidWorks的版本不断更新，其中2014版是较为经典的一代，具有多种功能和特点，特别是在结构构件设计方面有着很高的应用价值。

本文将介绍SolidWorks2014在结构构件设计方面的应用及其特点。

一、SolidWorks2014的基本介绍1. SolidWorks2014是一款强大的三维CAD软件，具有直观、易学易用的特点，广泛应用于机械、电子、汽车等领域的产品设计和工程设计中。

2. SolidWorks2014拥有丰富的功能模块，包括零件设计、装配设计、结构分析、流体分析等，支持用户进行全方位的设计和分析。

3. SolidWorks2014的界面简洁清晰，操作流畅，可以帮助用户快速完成复杂的设计任务。

二、SolidWorks2014在结构构件设计中的应用1. 结构构件设计是SolidWorks2014的重点领域之一，在工程设计中占有重要地位。

2. SolidWorks2014可以通过零件设计模块，实现结构构件的建模和细节设计，支持多种常见的结构构件类型，如轴承、齿轮、联轴器等。

3. SolidWorks2014的装配设计模块可以将各种结构构件进行组装，模拟结构的整体装配情况，检查构件之间的相互作用和配合。

4. SolidWorks2014还支持结构分析，可以对设计的构件进行强度、刚度、稳定性等方面的分析，评估构件在实际工作条件下的性能。

三、SolidWorks2014在结构构件设计中的特点1. 精确建模：SolidWorks2014支持用户进行精确的建模操作，可以准确地表达结构构件的几何特征和尺寸要求。

2. 模拟仿真：SolidWorks2014的结构分析模块可以进行多种仿真分析，帮助用户评估结构构件的性能，发现设计中的问题并及时改进。

3. 高效装配：SolidWorks2014具有高效的装配设计功能，用户可以通过装配模块将各种结构构件快速组装成整体，提高设计效率。