dell服务器常用安装SERVER2008指南

T130系统安装SERVER2008说明书
1.前期准备一个8G的U盘，下载一个SERVER2008 SP1的系统，注：一定要SP1版本，因为DELL 官网只提供SP1的驱动。

下载后使用UltraISO.v.9.6.
2.3059刻录，点打开找到已经下载的ISO文件，然后点启动图标，点写入硬盘映像
光盘目录有可启动标识，不然说明下载的不能启动
2.从技嘉官网下载WindowsImageTool程序，因为T130 13代及其之前的服务器不支持关闭USB
3.0 这个选项，SERVER2008又不集成USB3.0驱动
刚做好的SERVER2008 启动U盘插入电脑，打开上面这个程序，U盘路径会自动跳出来，只把这个前面的勾点下，其它不要动，点开始，START,大约50分钟至1小时，自动加载USB3.0完成。

当然有能力，有条件的可以手动加载也可。

3.打开DELL 服务器，按F2，完成2个地方的更改，选择“SYSTEM BIOS”选“SATA
SETTING”选择RAID MODE 模式，然后选择BOOT SETTING 选项，BOOT MODE 选择BIOS 然后下面点
BIOS BOOT SETTING
BOOT SEQUENCE 这个不动，C:第一作为第一选择项，其它不用动
最后一个选项：HARD DISK DRIVE SEQUENCE
这个一定要让RAID 为第一选择项，让后ESC 选择保存重启。

4.重启后按F11,选择ONE-SHOT BIOS BOOT MENU选项
5.选择U盘启动
6.随便找个U盘，下载RAID驱动，网卡驱动，显卡驱动，RAID 驱动，最好解压到U盘根目录。

WIN2008_64位下EDP SERVER安装方法步骤一：在win2008_64位上，可以安装“安装WinPcap网卡驱动模块”、“安装远程技术支持模块”、“安装数据库初始化模块”、在安装“安装WEB管理平台模块”是会提示您安装IIS服务，由于win2008_64位是使用的IIS7.0，它的管理工具是用.NET和Windows Forms写成的，所以需要新的配置方式，下来我们就先从安装IIS7.0说起：1.1计算机（右键）-选择“管理”,打开“服务器管理器”-“角色”-（右键）添加角色-下一步（图一）-选择需要安装的服务器角色，这里选择“WEB服务器(IIS)”（图二），由于这里已经安装，所以显示（已安装），提示这里在安装IIS7.0时，在里面包含IIS6.0及WEB服务扩展选项，勾上它们，这样为了兼容性更稳定！然后，点击“安装”，直到安装结束，重新启动计算机。

（图一）（图二）步骤二：2.1 设置“默认文档”(双击即可)，添加“index.asp”(右键添加即可)，如（图八和图九）：（图八）（图九）步骤三：调试属性3.1 设置“ASP”（双击即可），选择“调试属性”，“将错误发送到浏览器”-“True”，“启用客户端调试”-“True”，选择“行为”，“启用父路径”-“True”；“启用缓冲”-“True”，如图十：（图十）步骤四：设置“应用程序池”4.1 选择“应用程序池”下的“DefaultAppPool”，右键-高级设置：“启用32位应用程序”-“True”，如（图十一）：（图十一）注册失败提示：请用超级管理员权限重新注册时，检查VRV安装目录RegionManage下bin 文件夹中有无vrvedp_m.exe；WatchClient.exe这连个文件；若没有将VRVEIS下download 文件夹中客户端注册程序DeviceRegist.exe解压将里面的vrvedp_m.exe；WatchClient.exe两个文件放到RegionManage下bin文件夹文件夹下，重新注册。

名称解释：Disk Group：磁盘组，这里相当于是阵列，例如配置了一个RAID5，就是一个磁盘组VD(Virtual Disk)：虚拟磁盘，虚拟磁盘可以不使用阵列的全部容量，也就是说一个磁盘组可以分为多个VDPD(Physical Disk)：物理磁盘HS：Hot Spare 热备Mgmt：管理1、启动服务器，出现【Press <ctrl><R> to Run Configuration Utility】提示时，按下Ctrl+R2、在[No Configuration Present !]上按F2键，选择[Create New VD]创建新的虚拟磁盘。

3、下面是创建新虚拟磁盘的界面，在RAID Level选项按回车，可以出现能够支持的RAID 级别，在RAID Level中选择RAID5，然后按回车确认。

4、确认RAID级别以后，按向下方向键，将光标移至Physical Disks列表中，上下移动至需要选择的硬盘位置，按空格键来选择（移除）列表中的硬盘，当选择的硬盘数量达到这个RAID级别所需的要求时，Basic Settings的VD Size中可以显示这个RAID的默认容量信息，有X标志为选中的硬盘。

【其中按Tab键，也可以将光标移至VD Size栏，VD Size可以手动设定大小，也就是说可以不用将所有的容量配置在一个虚拟磁盘中，即这个虚拟磁盘没有使用我们所配置的RAID5阵列所有的容量，剩余的空间可以配置为另外的一个虚拟磁盘，但一般情况下都不用修改。

】如果这个虚拟磁盘没有使用我们所配置的RAID5阵列所有的容量，剩余的空间可以配置为另外的一个虚拟磁盘注：各RAID级别最少需要的硬盘数量：RAID0=1，RAID1=2 ，RAID5=3，RAID10=4 RAID50=65、上述的配置确认完成后，按Tab键，将光标移至OK处，按回车，会出现如下的提示，如果是一个全新的阵列，建议进行初始化操作。

安装设备驱动程序原本是一件非常简单的事情，很多驱动程序在安装的时候我们只要不停单击“下一步”按钮，就能让驱动程序顺利地在对应计算机系统“落户”;不过，当身边的计算机系统升级为Windows Server 2008系统后，我们发现不少设备的驱动程序根本不能按照常规思路，顺利地“落户”到Windows Server 2008系统中，这该如何进行应对呢?出现这种现象，多半是Windows Server 2008系统默认提高的安全性能，限制了设备驱动程序顺利“落户”到本地，我们只要对症下药、解除各种安全限制，就能保证目标驱动程序在Windows Server 2008系统中生根“落户”了!1、解除系统兼容性限制Windows Server 2008系统在默认状态下，对任何软件或设备的驱动程序兼容性要求非常高，如果目标设备的驱动程序或应用软件无法顺利兼容Windows Server 2008系统时，那么我们自然也就不能通过简单双击鼠标的方法将该设备驱动程序安装“落户”到本地计算机系统中。

为此，要想让设备驱动程序顺利地生根“落户”到Windows Server 2008系统中，我们必须要先尝试修改目标设备驱动程序的兼容性属性，让其能够与Windows Server 2008系统保持良好的兼容性，下面是解除系统兼容性的具体操作步骤：首先在Windows Server 2008系统中依次单击“开始”/“程序”/“附件”/“资源管理器”命令，在弹出的系统资源管理器窗口中，找到可执行的目标设备驱动安装文件，例如可以是“exe”或“msi”扩展名的文件;其次用鼠标选中目标设备驱动安装文件，并用鼠标右键单击之，从弹出的快捷菜单中点选“属性”选项，打开目标设备驱动安装文件的属性设置对话框，点选其中的“兼容性”选项卡，此时系统屏幕上会自动弹出如图1所示的选项设置页面;由于多数设备驱动安装文件都是基于Windows XP系统环境开发的，为了能让WindowsServer 2008系统“接纳”这种类型的驱动文件，我们必须在这里的“兼容性”位置处将“用兼容模式运行这个程序”项目选中，同时打开对应该项目下面的下拉列表，从中选择“Windows XP(Service Pack 2)”选项;此外，考虑到Windows Server 2008系统对用户的操作权限要求比较高，我们还应该在这里的“特权等级”设置项处选中“请以管理员身份运行该程序”复选项，最后单击“确定”按钮保存好上述设置操作，这么一来Windows Server 2008系统日后就不会对目标设备驱动程序的安装操作进行兼容性限制了，那么设备的驱动安装过程也就能比较顺利一些了。

DELLR520服务器U盘IOS模式启动安装WINserver2008R2x64系统教程
DELL R520服务器U盘IOS模式启动安装WIN server2008 R2 x64系统教程⾸先使⽤“深度U盘装机版软件或⼤⽩菜装机维护版软件”IOS模式制作IOS 启动安装U盘。

注：制作IOS启动U盘的IOS源件选择预先准备好的“Windows server2008_x64.IOS”步骤⼀：
先将制作WIN2008.IOS模式启动的U盘插⾄服务器USB接⼝，服务器开机后见到DELL R520 LOGO界⾯提⽰就按F11（BIOS Boot Manager）进⼊启动菜单选择界⾯。

温馨提⽰：DELL服务器硬件要求⾼不可以使⽤GHOST版系统软件安装，必须使⽤原版系统IOS光盘或U盘引导启动安装才能正常⼯作。

若否会出现系统崩溃或蓝屏故障等现象，切记！
步骤⼆：
设备启动，然后确定。

系统⾃动重启进⼊WIN2008安装界⾯，点击“现在安装”。

选择默认“中⽂简体”可以点击“下⼀步”。

步骤六：
然后点击“加载驱动程序”。

系统将会进⼊下⼀步⾃动安装模式，安装过程中重启就会完成整个系统安装过程。

步骤九：
系统安装完成后进⼊系统使⽤第三⽅软件“Windows Loader_2.2”激活系统。

步骤⼗：
最后安装系统对应的“⽹卡驱动、显卡驱动和主板芯⽚驱动”完成系统的驱动程序配置。

注：服务器驱动程序只能⼿动安装对应驱动，杜绝使⽤第三⽅软件如：驱动之家、驱动精灵和360软件管家等软件安装驱动，因DELL服务器硬件要求⾼这些安装的驱动会使服务器系统崩溃或蓝屏，相关驱动需要在DELL官⽹下载⽅可，驱动下载。

将DELL的驱动光盘放入光驱装载 FOR：技术支持部 开机按“F11”安装界面如下面图例：注：上图是IDE接口的光区，现在多半是采用SATA接口的，选择SATA Optical Drive稍等片刻，屏幕出现如下界面（不同版本的DOSA光盘界面可能略有不同，但所有步骤一样）引导光碟将检测您的服务器硬件，这里需要5-10分钟左右，请耐心等待。

（安装时，没有出现“创建公用程序分区”选项）注：windows server 2008 X64(64bit edition)跟windows server 2008 X86(32bit edition)是有区别的，目前公司（xys）的产品只支持在X86也就是32位的系统上运行。

另外需要注意一下的是R2，我们采用的是sp1的标准版。

开始复制驱动并应用 ，完成后弹出驱动光盘（换成win2008)，并重启电脑。

↑正在读取文件Windows↑ 启动安装程序↑ 选择语言、日期、键盘方式等(预设是中文)点击“现在安装”，开始安装此处约需要等一分钟，弹出如下图选择操作系统；英文图暂代勾上我接受许可条款，然后点“下一步”点击此项，升级为不可用状态驱动器选项（高级）↑ 正在安装windows server 2008↑重启准备启动进入“完成安装”阶段等待几分钟即可↑完成安装第二次重启我们终于看到登入画面了!按确定，输入密码。

密码必需同时包含字母、数字、字符等。

输入二次密码后登陆进windows 2008哇~~在准备桌面了耶....心里小鹿乱撞!!如果您刚刚是在虚拟机中安装的windows 2008,一定别忘了“创建虚拟快照”附：修改登陆密码复杂性要求的方法在开始——运行中输入gpedit.msc 在打开的组策略窗口中选择“计算机配置”——windows设置——安全设置——帐户策略——密码策略，选择“密码必需符合复杂性要求”右键属性，选择“已禁用”即可。

然后回到桌面，对着“我的电脑”右键“管理”——配置——本地用户和组——用户，选择用户右键“设置密码”，输入新密码后确定。

适用于 Dell™PowerEdge™ 系统的Microsoft®Windows®Small BusinessServer®2008安装 Windows Essential BusinessServer 2008w w w.d e l l.c o m|s u p p o r t.d e l l.c o m注和小心注：“注”表示可以帮助您更好地使用计算机的重要信息。

小心：“小心”表示如果不遵循说明，就有可能损坏硬件或导致数据丢失。

____________________本说明文件中的信息如有更改，恕不另行通知。

©2009Dell Inc.版权所有，翻印必究。

未经 Dell Inc. 书面许可，严禁以任何形式复制这些材料。

文中使用的商标：Dell、DELL徽标和PowerEdge是 Dell Inc. 的商标；Microsoft、Windows和Essential Business Server 是 Microsoft Corporation 在美国和（或）其它国家/地区的商标或注册商标。

本说明文件中述及的其它商标和产品名称是指拥有相应商标和产品名称的公司或其制造的产品。

Dell Inc. 对其它公司的商标和产品名称不拥有任何所有权。

2009 年 10 月修订版 A00安装 Windows Essential Business Server 3预安装要求您可通过使用 Unified Server Configurator (USC) 或 Dell System Management Tools and Documentation 媒介安装Microsoft ® Windows ® Essential Business Server ® 2008 操作系统。

在开始升级前，请确认您有：•随操作系统说明文件附带的 Microsoft Getting Started （Microsoft 使用入门）文档•Dell Systems Management T ools and Documentation 介质，或包括 USC 的系统•Microsoft Windows Essential Business Server 2008 安装介质•同时完成 Windows Essential Business Server Planning 和 Windows Essential Business Server Preparation 向导和对您的网络的必要更改。

Dell服务器安装server2008系统安装步骤
1、检查raid，保证至少有一个raid处于online状态；退出重启
2、开机按F10 进入lifecycle controller
3、进入OS Deployment（OS部署）
4、右边选择Deploy OS
5、选择Go Directly 同OS Deployment
6、进入之后选择自己需要安装的server版本类型
7、Manual Install （手动）
8、BIOS（该处是选择引导模式）
9、检查是否插入启动盘，若无检测到，则无法进入下一步（点击完成之后，至此安装前设
置已完全配置完成，直接重启进入系统）
注：在配置完成之后重启的过程中，跳过bios选项的时候会出现一个“按任意键进入引导盘”的英文选项，此时要及时操作，若无操作则会跳过系统的安装。

DELL服务器安装windows server 2008 R2系统原创2017年06月07日14:39:48•标签：•201706•1911一、配置服务器RAID1.开机自检界面按照屏幕提示，按Ctrl+R进入RAID配置界面，如图1-1所示：图1-1 开机自检界面2.等待一小会儿，系统自动进入虚拟磁盘管理器(Virtual Disk Management)，准备开始配置RAID，如图1-2所示：注：此界面中按Ctrl+N和Ctrl+P可进行界面切换。

图1-2 虚拟磁盘管理器界面3.此时虚拟磁盘为空，按上下键使光标停留在阵列卡型号所在行(图中的PERC H310 Mini)，按F2弹出菜单，选择Create New VD创建新的虚拟磁盘，如图1-3所示：图1-3 创建虚拟磁盘菜单项4.在RAID Level选项按回车会出现支持的RAID级别，RAID卡能够支持的级别有RAID0/1/5/10/50，根据硬盘数量不同，此处出现的选项可能也会有所区别。

选择不同的级别，选项会有所差别。

此处我们选择RAID1，按回车确认。

如图1-4所示：图1-4 RAID Level菜单5.确认RAID级别后，按向下方向键，将光标移至Physical Disks列表中，上下移动至需要选择的硬盘位置，按空格键来选择列表中的硬盘，当选择的硬盘数量达到上一步设置的RAID级别所需的要求时，Basic Settings的VD Size中可以显示这个RAID的默认容量信息。

有X标志为选中的硬盘。

选择完硬盘后按Tab键，可以将光标移至VD Size栏，VD Size可以手动设定大小，也就是说可以不将所有的容量配置在一个虚拟磁盘中。

如果这个虚拟磁盘没有使用我们所配置的RAID阵列所有的容量，剩余的空间可以配置为另外的一个虚拟磁盘，但是配置下一个虚拟磁盘时必须返回VD Mgmt创建。

VD Name根据需要设置，也可为空。

如图2-5所示：注：各RAID级别最少需要的硬盘数量，RAID0=1 RAID1=2 RAID5=3 RAID10=4 RAID50=6图1-5 配置RAID6.关于高级设置（Advanced Settings），如果没有特殊要求，不建议更改。

DELL R520服务器U盘IOS模式启动安装WIN server2008 R2 x64系统教程首先使用“深度U盘装机版软件或大白菜装机维护版软件”IOS模式制作IOS 启动安装U盘。

注：制作IOS启动U盘的IOS源件选择预先准备好的“Windows server2008_x64.IOS”步骤一：
先将制作WIN2008.IOS模式启动的U盘插至服务器USB接口，服务器开机后见到DELL R520 LOGO界面提示就按F11（BIOS Boot Manager）进入启动菜单选择界面。

温馨提示：DELL服务器硬件要求高不可以使用GHOST版系统软件安装，必须使用原版系统IOS光盘或U盘引导启动安装才能正常工作。

若否会出现系统崩溃或蓝屏故障等现象，切记！
步骤二：
设备启动，然后确定。

系统自动重启进入WIN2008安装界面，点击“现在安装”。

选择默认“中文简体”可以点击“下一步”。

步骤六：
然后点击“加载驱动程序”。

选择硬盘C分区安装，然后点击“下一步”。

系统将会进入下一步自动安装模式，安装过程中重启就会完成整个系统安装过程。

步骤九：
系统安装完成后进入系统使用第三方软件“Windows Loader_2.2”激活系统。

步骤十：
最后安装系统对应的“网卡驱动、显卡驱动和主板芯片驱动”完成系统的驱动程序配置。

注：服务器驱动程序只能手动安装对应驱动，杜绝使用第三方软件如：驱动之家、驱动精灵和360软件管家等软件安装驱动，因DELL服务器硬件要求高这些安装的
驱动会使服务器系统崩溃或蓝屏，相关驱动需要在DELL官网下载方可，驱动下载。

1 .打开下载下来的镜像文件解并保存在D盘目录下winser2008文件名
2. 从winser2008文件中复制boot 文件夹到C盘目录下
3. 从winser2008文件中复制bootmgr文件到C盘目录下
4. 在C盘目录下新建一下文件夹取名为sources,找到winser2008\sources\boot.wim 把boot.wim复制到C盘目录下sources 中，并记下C盘的磁盘名字
5. 在运行中输入CMD，进入命令提示符输入: c:\boot\bootsect.exe \nt60 c: 回车后重起，会自己动进入winser2008 安装
6. 在进入系统安装时会有一个窗口上显示是否马上安装，不要点马上安装，刚才复制到C盘的启动文件要删除，要不然选择安装后会进不去，会报启动错误
7. 不选马上安装，选择左下角的“修复”，之后要选择左下角的命令提示符，进入命令提示后输入以下：dir c: 查看C盘文件，这一步主要是看格式化的磁有不有错，确定没有错后，可以格式化C盘。

Format c: 会弹一下磁盘卷标，这个意思是C盘的磁盘名字就是第四步记下的C盘的名字，按Y 开始格式化，时间有点久。

8. 格式化完之后，dir D: 这个主要是为了找到D盘目录下winser2008 文件夹目录下的Sources 文件夹目录下的setup.exe 文件最后输入：d:winser2008\sources\setup.exe 回车后马上安装系统这只是一种没有光驱动的环境下安装第8步最后输入的路径不要搞错啊，dir D: 再dir winser2008 要是没有setup.exe 再从里面找。

服务器重装WindowsServer2008R2操作系统说明：因现场两台数据处理服务器感染病毒，服务器上也没有⽐较重要的内容，因此直接选择进⾏重装，这⾥记录⼀下重装过程，便于后续使⽤。

硬件：两台Dell台式机，不⽀持光盘读写。

步骤：1、制作系统启动U盘因为机器不⽀持光盘读写，因此直接使⽤U盘进⾏系统安装，另外，因我这⾥两台机器⽆需要备份内容，直接进⾏安装，建议重装系统前做好数据备份⼯作。

制作启动U盘，我这⾥使⽤的是UltraISO⼯具（建议可以使⽤绿⾊版）进⾏制作的（如果是Win10，建议使⽤官⽅提供的MediaCreationTool ⼯具），镜像⽤是“MSDN我告诉你”⽹站上下载的官⽅原版镜像（个⼈强烈建议使⽤官⽅原版镜像）。

使⽤UltraISO⼯具制作启动U盘也⽐较简单，打开软件，直接在启动——》写⼊硬盘映像，选择需要写⼊的ISO⽂件进⾏写⼊即可。

2、系统安装插上启动U盘重启服务器，按F12后，选择插⼊的U盘作为启动项开始安装。

（对于Dell的台式机，启动项选择是通过F12键实现的，其他品牌的电脑有各⾃的快捷键，请根据⾃⼰电脑品牌和型号选择）。

安装过程中，选择⾼级驱动器选项对硬盘进⾏格式化。

（这⾥是因为中病毒原因，所以直接格式化，如果是普通情况，建议只格式化备份后的C盘即可），另外，可以在这⾥进⾏重新分区以及分区⼤⼩调整等。

系统安装过程中按照⼀步步操作即可，⽐较简单，这⾥不再进⾏赘述，安装完成后可以通过激活软件或者激活码进⾏系统激活。

3、驱动安装刚安装好的系统往往是缺少驱动的，对于⽹卡驱动，我这⾥是直接根据型号在官⽹进⾏下载的，其他显卡、声卡等驱动通过360驱动⼤师进⾏联⽹安装更新。

这⾥推荐使⽤360驱动⼤师，个⼈⽐较讨厌捆绑的软件，因此使⽤的是独⽴exe版本，也试过驱动⼈⽣等，但是对于Server的驱动有些不兼容。

问题：在安装王凯驱动时，提⽰下图问题，通过安装Windows6.1-KB2533623-x64.msu补丁程序并重启后解决。

Microsoft®Windows®Small Business Server 2008 for Dell™PowerEdge™ SystemsInstallation GuideNotes and CautionsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.Information in this document is subject to change without notice.©2010Dell Inc.All rights reserved.Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell, the DELL logo, Dell OpenManage, and PowerEdge are trademarks of Dell Inc.; Microsoft, Windows, and Windows Server are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.February 2010 A00This document provides the instructions to install your Microsoft® Windows® Small Business Server2008 operating system and includes the following topics:•“Pre-Installation Requirements” on page4•“Installing Microsoft Windows Small Business Server 2008 Using the USC” on page4•“Installing Microsoft Windows Small Business Server 2008 Using the Dell Systems Management Tools and Documentation Media” onpage6•“Installing Microsoft Windows Small Business Server 2008 Using the Operating System Media” on page8NOTE: If you purchased a Dell™ system without the operating system installed on your system, it is strongly recommended that you use the Unified ServerConfigurator (USC) or the supported version of the Dell Systems Management Tools and Documentation media to guide you through the operating system installation. NOTE: If you use the operating system media to install the operating system,you must install the latest device drivers located either on the Dell Systems Management Tools and Documentation media or at/support/downloads.Installing Windows Small Business Server 200834Installing Windows Small Business ServerPre-Installation RequirementsCAUTION:The following installation procedures erase all data on your hard drive. It is recommended that you backup all important data before you begin installation.To determine the devices that are installed on your system:1Boot your system from the Dell Systems Management T ools and Documentation media.2Select View Hardware in the System Software Manager window.The devices installed on your system are listed on your screen.Before you install the operating system:•Read any additional document that ships with your operating system.•Ensure that your system has the latest BIOS, firmware, and driver updates. If required, download the latest BIOS, firmware, and driver updates from or use the Dell Server Update Utility available on the Dell Server Updates media.•Create a device driver media (diskette, USB drive, CD, or DVD). NOTE: If you are not using the Dell Systems Management Tools andDocumentation media or the USC, and the operating system does not have the driver for the storage controller, you must create a device driver media. For more information, see “Creating a Device Driver Media” on page 10.Installing Microsoft Windows Small Business Server 2008 Using the USC1Connect the keyboard, monitor, mouse, and any peripherals to the system that you have chosen to configure as the management server.2T urn on the system and the attached peripherals.3Press <F10> to enter System Services .The Unified Server Configurator menu is displayed with several options.4Select OS Deployment .The Configure RAID now or Go directly to OS deployment screen is displayed.5Configure the RAID at this time. If the RAID is already configured, select OS deployment, and click Next.The Select Operating System screen is displayed with a list of compatible operating systems.NOTE: Ensure that the RAID is properly configured to enable the requiredWindows Small Business Server 2008 configuration. For information onrecommended partition sizes and configurations, see the Getting Starteddocument and other reference documentation from . 6Select Microsoft Windows Small Business Server 2008, and click Next. 7Insert the operating system media when prompted, and click Finish to reboot the system.8Press <F11> to ensure that you boot from the operating system media and select the DVD drive or press a key when prompted.The Install Windows screen is displayed.9Select the appropriate option for Language, Time and Currency Format, and Keyboard or Input Method, and click Next.The Operating System Install screen is displayed.10Select the operating system you want to install, and click Next.The License Agreement screen is displayed.11Read the information carefully. If you agree with all the information, selectI accept the license terms and then click Next.The Which T ype of Installation Do Y ou Want screen is displayed.12Click Custom(advanced), if it is not selected.The Disk Partition screen is displayed.13Select the partition on which you want to install Windows Small Business Server 2008 and click Next.The Installing Windows screen is displayed and the installation process begins.Installing Windows Small Business Server 200856Installing Windows Small Business Server14Complete the instructions in the Windows Small Business Server 2008 Installation wizard.To complete the operating system installation, perform the procedure described in "Completing the Operating System Installation " onpage 12.Installing Microsoft Windows Small Business Server 2008 Using the Dell Systems Management Tools and Documentation MediaY ou must configure the system to boot from the CD/DVD drive. To install the operating system using the Dell Systems Management T ools and Documentation media:1Connect the keyboard, monitor, mouse, and any additional peripherals to your system.2T urn on the system and the attached peripherals.3Insert the Dell Systems Management T ools and Documentation media into the CD/DVD drive.4Press <F2> when prompted to run the setup utility.The BIOS Settings screen is displayed.5Using the arrow keys, scroll to the Boot Sequence field and press <Enter>.6Configure the DVD ROM drive to be the first boot option and press <Esc> to exit the BIOS Setting screen.The system prepares to boot from the CD/DVD drive. NOTE: Alternatively, you can press <F11> to enter the Boot Device Menu to select the DVD ROM drive as the boot option.The Dell Systems Management T ools and Documentation media menu is displayed with several options.Installing Windows Small Business Server 200877Select Dell Systems Build and Update Utility.The system boots from the selected option.NOTE: This may take several minutes depending on the speed of the drive.The Dell Systems Build and Update Utilityscreen is displayed.8Select the Server OS Installationoption in the Single Server Solutionsection.The Select Operating System screen is displayed with a list of compatible operating systems.9Select Microsoft Windows Small Business Server 2008.Ensure Create Utility Partition option is checked if you want to create a utility partition and click Continue .NOTE: If you select the Create Utility Partition option, you can run system diagnostics and memory tests using the <F10> key during post.The Configure or Skip RAID screen is displayed.10Select Skip Raid Configuration if RAID is already configured and click Continue .NOTE: If the RAID is configured, then the existing RAID configuration details are displayed.NOTE: Ensure that the RAID is properly configured to enable the required Windows Small Business Server 2008 configuration. For information onrecommended partition sizes and configurations, see the Getting Starteddocument and other reference documentation from .The Installation Summary screen and the installation options that you have selected, are displayed.11Click Back to change the installation options. If the options displayed are accurate, click Continue .CAUTION: All system partitions are erased along with all data on the local hard drives.The Server OS Installation screen is displayed and the operating system installation begins.8Installing Windows Small Business ServerCAUTION: TheDell Systems Build and Update Utility screen prompts you toremove the media after all the installation settings are finalized. Remove the Dell Systems Management Tools and Documentation media. The system reboots to local hard drives and then prompts for the Windows Installation media. Do not boot directly to the CD/DVD drive at this stage.12Click Finish after you have inserted the Windows installation media in the CD/DVD drive.The system may display messages during installation.13Press OK to continue with installation.14Follow "Installing Microsoft Windows Small Business Server 2008 Using the USC" on page 4.To complete the operating system installation, perform the procedure described in "Completing the Operating System Installation" on page 12.Installing Microsoft Windows Small Business Server 2008 Using the Operating System MediaNOTE: It is recommended that you use the USC or Dell Systems Management Tools and Documentation media as it includes the latest drivers and fixes for your Dell system.1Connect a keyboard, monitor, mouse, and any additional peripherals to your system.2T urn on your system and any attached peripherals.Several BIOS screens appear during startup, but do not require any user intervention.3Insert the Microsoft Windows Small Business Server 2008 media into the DVD drive.NOTE: If a Windows operating system is installed on your system, thefollowing message is displayed: Press any key to boot from the CD/DVD ...Press any key to begin the installation.The following message is displayed:Windows is Loading FilesAfter the files are loaded, the Install Windows screen is displayed.Installing Windows Small Business Server 200894Select the appropriate Language , Time & Currency , and Keyboard values and click Next .The Windows Small Business Server 2008 screen is displayed.5Click Install Now .The T ype your product key for activation screen is displayed.6Enter the 25-character product key located on your Certificate of Authenticity (COA) label and clickNext .NOTE: The COA label is shipped along with your operating system.NOTE: If you are using the Dell recovery media to install or reinstall youroperating system, you will not be prompted for the product key.The Please read the license terms screen is displayed along with the software license terms.7Read the license terms, select the I accept the license terms option, and click Next to continue with the installation.The Which type of installation do you want screen is displayed.8Select Custom (advanced) for a new operating system installation.The Where do you want to install Windows screen is displayed.9Specify the partition on which you want to install the operating system.NOTE: If the storage controller driver is not installed on your system, youcannot create the hard-drive partitions. You may need to provide massstorage drivers during installation. Download the required driver file to adriver diskette, CD, DVD, or USB drive in the root directory of the media. For more information, see "Creating a Device Driver Media" on page 10. To provide the driver during setup, click Load Driver . You can browse to locate the driver or use Setup to search the media.To create a partition and begin installation:aClick New .b Specify the size of the partition in MB, and click Apply .NOTE: The recommended minimum partition size for the Primary partition is 60 GB. If you are installing additional memory on your system, you may require additional primary partition space to accommodate the page file. For moreinformation on page files, see Microsoft Knowledge Base (KB) article 99768 and KB article 889654 on .c Select the newly-created partition and click Next.The Installing Windows screen displays the progress bar for the installation of the operating system.NOTE:The installation procedure may take some time to complete.After the first phase of operating system installation is complete, thesystem reboots.The Continue Installation screen is displayed.10Click Next if you are not migrating from Windows Small Business Server 2003 to Windows Small Business Server 2008. For more information onmigrating from Windows Small Business Server 2003 to Windows SmallBusiness Server 2008, see the Windows Small Business Server 2008Migration Guide at .To complete the operating system installation, perform the proceduredescribed in "Completing the Operating System Installation" on page12.Creating a Device Driver MediaUse one of the methods described in the following sections to create a device driver media:Downloading Drivers From the Dell Systems Management Tools and Documentation Media:1Insert the Dell Systems Management T ools and Documentation media into the system.The Welcome to Dell Service and Diagnostic Utilities screen is displayed.2Select your server model and operating system and click Continue.The list of drivers is displayed.3Select the required driver, the self-extracting zip file and click Run. Copy the driver to a diskette drive, CD, DVD, or USB drive.Repeat this step for all the drivers that you require.4Use the media that you created with the Load Driver option, to load mass storage drivers.NOTE: To provide the driver during setup, click Load Driver. You can browseto locate the driver or use Setup to search the media.10Installing Windows Small Business ServerDownloading Drivers From the Dell Support Site1Go to .2Click Drivers and Downloads.3Enter the service tag of your system in the Choose by Service Tag field or select your system’s model.4Select the System T ype, Operating System, Driver Language, Category, and Importance from the drop-down list.NOTE: On the primary server, select Microsoft Windows Small BusinessServer 2008 x64 to install the operating system. On the secondary server(Premium only), depending on the operating system you want to install, selectMicrosoft Windows Server 2008 x64 or Microsoft Windows Server 2008 x86.The drivers that are applicable to your selection are displayed.5Download the drivers that you require to a diskette drive, USB drive, CD, or DVD.6Use the media that you created with the Load Driver option, to load mass storage drivers.NOTE: To provide the driver during setup, click Load Driver. You can browseto locate the driver or use Setup to search the media.Using the DRAC Diskette ImageInstall the Dell mass storage drivers using Dell Remote Access Controller DRAC 4, DRAC 5 or iDRAC diskette images located at . For information on setting up the virtual diskette drive media, see the DRAC documentation available at /manuals.NOTE: You can install drivers using the DRAC diskette image only if your system has a DRAC installed and configured.Completing the Operating System InstallationAfter installing the operating system, perform the following procedure to enter the required information:1In the Verify the clock and time zone settings screen, click Open Date and Time to verify the clock and time zone settings to change the clock and time zone settings.Click Next.The Get important updates screen is displayed.NOTE: If the operating system does not have the driver for the networkcontroller, A network adapter not found screen is displayed. Use one of thefollowing options to install a network controller driver:•Open Device Manager to install drivers•BrowseNOTE: You cannot proceed with the installation unless you install the networkcontroller driver.2Select Go online and get the most recent installation updates.NOTE: You can select this option only if the system is connected to theInternet. Select Do not get the most recent installation updates if the system isnot connected to the Internet.The Connecting your server screen is displayed along with the progress of the installation updates.Once the updates are completed, the Company information screen isdisplayed.3Enter the details of the company(optional) and click Next.The Personalize your server and your network screen is displayed.4Enter the server name, the internal domain name and click Next.NOTE: The server name and internal domain name cannot be changed afterthe installation.The Add a network administrator account screen is displayed.5Enter the network administrator user name and password and click Next.The Install Security services screen is displayed.6Select the appropriate security service(optional) and click Next.NOTE: The security services listed in the Install Security services screen aretrial versions valid for four months. You have to buy the full license separately.Check the details of the network administrator account, server name, anddomain name in That is all the information needed screen, and click Next toconfirm.The Expanding and Installing files screen is displayed along with the progress of installation.NOTE: The installation may take 30 mins to an hour to complete dependingupon the hardware you are using.NOTE: During the operating system installation, the system reboots multipletimes.The Successful installation screen is displayed once the installation is complete.7Click Start using the server.NOTE: If the system encounters problems during installation, the InstallationIssues screen displays the list of problems.The Windows SBS Console screen is displayed.8Select the appropriate initial configuration tasks to complete the system setup and close the window once the configuration is complete.Installing Windows Small Business Server 2008 Premium EditionTo install the Premium edition of Microsoft Windows Small Business Server 2008, you must install two servers.1To install the first server, use this document.2To install the second server, ensure that you select the required media architecture (x86 or x64), and follow one of the installation proceduresexplained in this document to install the operating system using USC,Dell Systems management T ools and Documentation media, or theoperating system media.NOTE: If you require specific instructions, see Installing Windows Server2008 available at /ostechsheets. After installing, join the secondserver to the Windows Small Business Server 2008 domain using the nativemethod.3To view the second server in the Windows Small Business Server 2008 console, click Network→ Computers. The second server is listed under Client computers.Installing SQL Server 2008For information on installing SQL Server 2008 on your system, see How to: Install SQL Server 2008 at .NOTE: The SQL Server 2008 license is included in Windows Small BusinessServer 2008 Premium Edition that you can use to install SQL Server 2008 on thesecond server in the Windows Small Business Server 2008 domain.NOTE: Product keys for SQL Server are available on the Product Key labels,found inside the DVD case.。


1.将 2008 安装光盘插入 DVD 光驱; 2，开机的时候按 F11 进入 boot menu,从 boot menu 中选择从光驱启动（optical drive);
3，选择好语言与区域
4，点击 Install Now 继续安装


5，输入 CD-KEY，如果是 DELL 的 OEM 系统，那么序列号在服务器机箱上贴着
如果暂时没有没有 CD-KEY，可以点击 NEXT 跳过继续，但在操作系统安装完毕后会要求你输入序列号
6，同意协议并继续
7，选择需要的模式进行安装，这里我们选择 Custom (Advanced).


8，确认安装的硬盘及分区继续（如果需要加载 SCSI 驱动，点击 load driver 即可） (因您的服务器有配置 raid 卡，在这个界面无法直接识别到硬盘，需要加载阵列卡驱动) 加载阵列卡驱动步骤为： 1. 首先下载阵列卡驱动； 2. 解压驱动至 U 盘； 3. 在以下界面点击 load drives（加载驱动）加载即可识别到硬盘.


9，
10，
11，
12，


13，
14,
15,


16
安装完毕









。

注：此版本dosa支持相应系统为：1、Server 2003 sp2 ；2、Server 2003 sp2 64 bit ；3、windows 2003 SBS sp2；4、Server 2008；5、windows 2008 SBS\EBS x64；6、Red hat Linux4.7 32bit；7、Red hat Linux 4.7 64bit； 8、Red hat Linux5.2 32bit； 9、Red hat Linux 5.2 64bit； 10、Suse Linux10 sp2 64bit； 11、ESX 3.5 U4操作系统光盘版本一定要和DOSA 安装时选择的版本一致，否则DOSA会报告插入无效光盘。

安装步骤:1、在开机自检时按F10 进入USC 安装界面：2、进入F10界面，这里需要耐心等待5分钟左右：3、进入安装界面选择os deployment :4、配置raid （在raid卡bios 中也可进行配置，这里就可以选择跳过raid 配置）：本文选择配置，配置raid会格式化硬盘一定确认硬盘所有数据都备份5、Raid 配置界面：（1）:现有的raid 配置，如果需要重新设置可选下一步：（2）：确认raid卡型号，点击下一步：（3）：可以选择高级或快速配置：（本文选择高级向导）（4）：选择需要配置的raid级别：（5）:将光标移到Disk，选中需要做成阵列的硬盘：（6）:可根据需要设置磁盘大小读写等（7）:最后确认raid 信息符合要求后点击完成：6、选择要安装的操作系统，点击下一步：7、将2008盘放入光驱，点击下一步：8、确认盘已放好点击完成：9、机器自动重启后从光驱引导：10、选择好语言与区域：11、点击Install Now继续安装：12、输入CD-KEY，如果是DELL的OEM系统，那么序列号在服务器机箱上贴着：13、如果暂时没有没有CD-KEY，可以点击NEXT跳过继续，但在操作系统安装完毕后会要求你输入序列号14、同意协议并继续：15、选择需要的模式进行安装，这里我们选择Custom (Advanced)：16、确认安装的硬盘及分区继续：17、复制文件：18、复制完成进入2008 界面：19：登入后设置登入密码：20：设置密码：21、密码设置成功: 至此2008 安装完毕。