黑色电泳TE-8800操作说明书

23Thermostat features . . . . . . . . . . . . . . . . . . . . . . . . . . .3Controls & display overview . . . . . . . . . . . . . . . . . . .4-5AbOUT yOUR NEW THERMOSTATOpERATIONSelect system mode (HEAT/COOL) . . . . . . . . . . . . . . . .6Change temperature set point . . . . . . . . . . . . . . . . . . . .6Select fan setting (ON/AUTO/CIRC) . . . . . . . . . . . . . . .7Clean screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Maintenance reminders . . . . . . . . . . . . . . . . . . . . . . . . .7Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . .8THERMOSTAT fEATURES• L arge touch screen with adjustable backlight – constant backlight available.• M essage center provides feedback and instructions.• 7 day programmability or separately programmable weekday/weekend schedules.• T hermostat can be removed from the wall for easy programming (batteries must be installed).• F ront battery door access for fast, easy replacement.• D isplays room temperature, room humidity, temperature setting, and optional outdoor temperature.• A ir filter, humidifier, dehumidifier, and HVAC service indicators.• P rogrammable fan control with fan circulation mode.• E asy to use temperature control can override program schedule at any time.• P rogressive recovery ensures proper temperature at the start of a program event.• B uilt in compressor protection prevents damage to your equipment.• R S485 communications ready.• U niversal system compatibility.• C onfigurable to control a humidifier and dehumidifier.pROGRAMMINGSet time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Understanding program schedules . . . . . . . . . . . .13-14Progressive recovery . . . . . . . . . . . . . . . . . . . . . . . . . .14Changing program schedules . . . . . . . . . . . . . . . .15-16Program schedule holdsTemporary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Permanent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Vacation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19SETUp MENUHow to enter the setup menuto change settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .20User system settings table . . . . . . . . . . . . . . . . . .21-22WARRANTyLimited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Warranty registration . . . . . . . . . . . . . . . . . . . . . . . . . .23Humidistat control screen . . . . . . . . . . . . . . . . . . . . . . .9How to enter the setup menuto change Humidistat Mode . . . . . . . . . . . . . . . . . . . .10HUMIDISTAT fUNCTIONSNetwork override . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11NETWORK fEATURES45 CONTROlS & DISplAy OVERVIEW – HOME SCREENNOTE: BACkLigHT iS ACTiVATED wiTH FiRST BUTToN PRESS AND AUToMATiCALLy TURNS oFF.BUTTONSETTINGBUTTONSETTINGSTATUSCENTERCONTROlS & DISplAy OVERVIEW – MAIN MENUBUTTONDoNE BUTToN(EXiT MENU)67press [MODE] to select:EM HEAT: (only for heat pumps with auxiliary heat) Thermostat controls auxiliary heat . Heat pump will not operate in EM HEAT mode .HEAT: Thermostat controls only the heating system .Off: Heating and cooling systems are off .COOl: Thermostat controls only the cooling system .AUTO: (if enabled in installer setup) Thermostatautomatically selects heating or cooling depending on the indoor temperature .press [DONE] to save and exit, or [CANCEl] to exit without saving . The thermostat will save and exit ifnothing is pressed within 10 seconds .press or to adjust the current set point.(See Program Schedule Holds on pages 17-19 for more information .)SElECT SySTEM MODE(EM HEAT/HEAT/OFF/COOL/AUTO)CHANGE TEMpERATURE SET pOINTpress [MENU] to enter the main menu .press [ClEAN SCREEN] to disable the touch screen for 30 seconds for cleaning .Note: Use a soft damp cloth to clean the screen . Use water or household glass cleaner. Do not spray liquids directly on the screen .ClEAN SCREENSElECT fAN SETTING (ON/AUTO/CIRC)press [fAN] to select:ON: Fan runs continuously. Use this mode for maximum air circulation/cleaning .AUTO: Fan runs only when the heating or cooling system is on .CIRC: Same as AUTo, but ensures the fan is on for at least 20 minutes per hour. Use this mode for a balance of energy savings and air circulation/cleaning .press [DONE] to save and exit, or [CANCEl] to exit without saving . The thermostat will save and exit ifnothing is pressed within 10 seconds .When the fan mode is changed during a program event it remains in that mode until the next event starts . The fan must be programmed to FAN oN in the schedule torun continuously through all events .MAINTENANCE REMINDERSMaintenance reminders are set up by the installer to indicate when the equipment is due for service. if a maintenance reminder is displayed, call your HVAC dealer for service. They can be cleared by pressing [MENU] to enter the main menu, then [Next] to clear each reminder .89& DATEHUMIDISTAT fUNCTIONSThe Model 8800 has the option of being configured as a humidistat that can control a humidifier and dehumidifier.HUMIDISTAT CONTROl SCREENCENTER1011NETWORK OVERRIDEThe network override feature is only available to be enabled when the thermostat is set to non-programmable modeor humidistat mode. when enabled, this feature can be used by pressing[HOlD] .SECURITyA four digit security PiN can be enabled to restrict access to the system. if you forget your PiN, you can access thethermostat with the master PiN 7777.STATUS INDICATORSThe status indicator is located at the top of the screen. when the thermostat sends or receives messages, thebars flash across the screen. The message center will display “CoMMUNiCATioN LoST” if the thermostat has notreceived communications in the last 15 minutes .BARS FLASHACROSS SCREENHOW TO ENTER THE SETUp MENU TO CHANGE HUMIDISTAT MODEpress [MENU] to enter the main menu .press [SETUp] to enter the setup menu .press or to adjust the setting. (Selected optionflashes .)Press [DONE] to save and exit, or [CANCEl] to exitwithout saving .The thermostat will discard changes and exit if nothingis pressed within 60 seconds .press [Next] or [back]to page through the settings,until you get to the Humidistat Mode Setting (thesetting is displayed in the message center) .1213press [Next], then or to set the minute .press [DONE] to save and exit, or [CANCEl] to exit without saving . The thermostat will save and exit ifnothing is pressed within 20 seconds .press [MENU] to enter the main menu . press [SET DATE] to enter date menu .SET DATEpress [MENU] to enter the main menu . press [SET ClOCK] to enter clock menu.SET TIMEpressorto set the hour .press [Next], then or to set the day .press [Next], thenorto set the year .press [DONE] to save and exit, or [CANCEl] to exitwithout saving . The thermostat will save and exit ifnothing is pressed within 20 seconds .press orto set the month .UNDERSTANDING pROGRAM SCHEDUlES The daily schedule is split into four events:WAKE: temperature you would prefer to wake up to.lEAVE: temperature when you are away from the house .RETURN: temperature you would prefer to return home to .SlEEp: temperature you would prefer while sleeping .The times shown in the table below are the defaults. The start time and temperature of each section can be changed to fit your schedule. (See Changing Program Schedules section on pages 15-16.)This thermostat is pre-set to use the following program settings recommended by the Department of Energy(see table below). These settings are intended to reduce your heating/cooling expenses. The fan program is pre-setto AUTO for all events .1415UNDERSTANDING pROGRAM SCHEDUlES (CONTINUED)optionally, the thermostat can be set to a two event or commercial schedule. (See Setup Menu on page 20.)pROGRESSIVE RECOVERyThe Progressive Recovery feature allows the thermostat to activate the heating and cooling equipment prior to an event in order to reach the desired temperature at the start of the next scheduled event .Example: if the wAkE time is 6 am, and the set temperature is 70°, the heat will come on before 6 am, so the temperature is 70° by the time you wake at 6 am.press [Next], then orto set the start time ofthe first event .press [MENU] to enter the main menu .press [SET SCHEDUlE] to enter schedule programming .CHANGING pROGRAM SCHEDUlES pressorto select the day .press [Next], then orto set the setpoints of the first event .Note: This step is not displayed for weekday/weekend schedules .1617press [Next], then [fAN] to set the fan mode of the first event .CHANGING pROGRAM SCHEDUlES(CONTINUED)press [Next] to advance to the next event . Repeat above process for each remaining event.press [DONE]to save the schedule for the day .The thermostat will display the CoPy option.press [COpy] to copy the schedule of the day just programmed to any other day .ORpress [CANCEl] to proceed to the next day and repeat the above process.TEMpORARy pROGRAM HOlDpress or to immediately adjust the temperature when the schedule is running . This will temporarily hold the temperature setting until the next scheduled event .pROGRAM SCHEDUlE HOlDS– TEMpORARy press or to adjust the end time of the hold. if end time is not adjusted, the Temporary Hold will end at the start of the next event .To cancel the Temporary Hold, press [CANCEl HOlD].1819pERMANENT pROGRAM HOlDpress [HOlD] to permanently hold the temperature at its current setting while the schedule is running . This will override the temperature settings for all events . with the thermostat in Permanent Hold, the temperature setting and fan mode can be adjusted and will stay atthat setting until the hold is cancelled .To cancel the Permanent Hold, press [CANCEl HOlD] .VACATION pROGRAM HOlDThis energy saving feature allows you to suspend the programmed schedule for extended periods of time . The temperature you select will be maintained 24 hours a day until the vacation program hold end date and time . once the end date and time have been surpassed, the previously programmed schedule will resume . If you return earlier than expected, press [CANCEl HOlD] to resume the programmed schedule .press orto adjust thetemperature setting .pROGRAM SCHEDUlE HOlDS – pERMANENT press [MENU] to enter the main menu . press [SET VACATION] to enter vacation program hold .pROGRAM SCHEDUlE HOlDS – VACATION VACATION pROGRAM HOlD (continued)press [Next], then[fAN] to set the fan mode .press [Next], thenorto set end date .press [Next], thenor to set end time .press [DONE] to save and exit, or [CANCEl]to exitwithout saving . The thermostat will save and exit if nothing is pressed within 20 seconds .pROGRAM SCHEDUlE HOlDS – VACATION (CONTINUED)2021HOW TO ENTER THE SETUp MENU TO CHANGE SETTINGS press [MENU] to enter the main menu . press [SETUp] to enter the setup menu .press or to adjust the setting. (Selected optionflashes .)Press [DONE] to save and exit, or [CANCEl] to exitwithout saving .The thermostat will discard changes and exit if nothingis pressed within 60 seconds .press [Next] or[back] to page through the settings (the setting is displayed in the message center) .USER SySTEM SETTINGS TAblEThe following table is the list of the settings and their details. Default settings are shown in bold.2223USER SySTEM SETTINGS TAblE (CONTINUED)Please…Take a few minutes to visit us on-line at to register your Aprilaire product.if you do not have on-line access, please mail a postcard with your name, address, phone number, product purchasedand date of purchase to: Research Products Corporation, P .o. BoX 1467, Madison, wi 53701your Research Products Corporation Aprilaire ® Thermostat unit is expressly warranted for five (5) years from date of installation to be free from defects in materials or workmanship.Research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for any thermostat which is found to be defective within such five (5) year period and which is returned, together with the date of installation, no later than thirty (30) days after said five (5) year period by you to either your original supplier or to Research Products Corporation, Madison, wisconsin 53701.THiS wARRANTy SHALL NoT oBLigATE RESEARCH PRoDUCTS CoRPoRATioN FoR ANy LABoR CoSTS AND SHALL NoT APPLy To DEFECTS iN woRkMANSHiP oR MATERiALS FURNiSHED By yoUR iNSTALLER AS CoNTRASTED To DEFECTS iN THE THERMoSTAT iTSELF.iMPLiED wARRANTiES oF MERCHANTABiLiTy oF FiTNESS FoR A PARTiCULAR PURPoSE SHALL BE LiMiTED iN DURATioN To THE AFoRESAiD FiVE yEAR PERioD. RESEARCH PRoDUCTS CoRPoRATioN’S LiABiLiTy FoR iNCiDENTAL oR CoNSEQUENTiAL DAMAgES, oTHER THAN DAMAgES FoR PERSoNAL iNJURiES, RESULTiNg FRoM ANy BREACH oF THE AFoRESAiD iMPLiED wARRANTiES oR THE ABoVE LiMiTED wARRANTy iS EXPRESSLy EXCLUDED. THiS LiMiTED wARRANTy iS VoiD iF DEFECT(S) RESULT FRoM FAiLURE To HAVE THiS THERMoSTAT iNSTALLED By A QUALiFiED HEATiNg AND AiR CoNDiTioNiNg CoNTRACToR. iF THE LiMiTED wARRANTy iS VoiD DUE To FAiLURE To USE A QUALiFiED CoNTRACToR, ALL DiSCLAiMERS oF iMPLiED wARRANTiES SHALL BE EFFECTiVE UPoN iNSTALLATioN.Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state .This equipment if installed in strict accordance with the manufacturer’s instructions, complies with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules.WARRANTy REGISTRATIONyour Warranty Registration information will not be sold or shared outside of this company.。

在线微量水分析仪Model 8800A & 8800B操作手册Teledyne Analytical InstrumentsA Business Unit of Teledyne Electronic Technologies前言制造商保留更改或修改权利，如产品规格或外观有改动恕不另行通知；因此，在此文件中的信息并不代表制造商的承诺，如有变更，恕不另行通知。

在收件时，如果有明显的损害请及时通知承运人，并要求签收现场开箱检查。

开箱，检查8800系列微量水分析仪的包装是否损坏、清点器件已确认是否有丢失、缺件或误发。

开箱，它应包括：8800系列微量水分测定仪，传感器干燥剂的容器中，外接式电缆，本手册。

注意：由于传感器属须密封保存的精密附件，请勿在阅读完本手册之前，拆卸或安装传感器；以免造成不必要的损失。

本手册分为三部分：第1节是对8800系列微量水分析仪的概述。

第2节描述了传感器和采样技术。

第3节介绍了仪器的机械、电气和用户操作界面。

本手册是为已经安装使用和维修仪器分析或提供熟悉过程。

与其它Teledyne公司的露点测量产品，如8800P便携表或8800T变送器对比，将受益于所有用户操作界面的通用和一致性。

警告标铭下面显示的符号出现在仪器上，以提醒用户潜在的危险状况。

保护接地高压警告-有触电危险接线警告-请参考文件说明保修这台仪器是从工艺和材料上保证其无缺陷。

本保修责任仅限于提供服务，校准和更换仪器有缺陷的部件退回为此工厂跟换。

保险丝被明确排除的保修和责任意外。

本担保是从原始购买之日起生效。

该设备损坏，必须由生产厂家来判定是否由于设计缺陷造成的；如果是，保修是有效的。

本保证适用于如下：•电子器件为一年•传感器的机械故障为一年•出厂校准的有效期为六个月如果损坏判断是因误操作引起的异常情况，将通知用户；在获得修理批准后，将按标准费率收取费用。

目录1. 8800系列微量水分析仪的概述 12. 传感器和取样技术 4 2.1 传感器的使用注意事项 4 2.2 传感器的技术规格 5 2.3 传感器的安装及取样技术 5 2.3.1 在现场安装 5 2.3.2 采样安装 6 2.4 机械安装72.5 意外读数的故障排除73.仪器8 3.1 8800系列使用注意事项8 3.1.1 电磁兼容性注意事项8 3.2 仪器的技术指标8 3.3 安装9 3.3.1 仪器的机械安装9 3.3.1.1 8800A（DIN43700）附件的安装9 3.3.1.2 8800B（IP65）附件的安装9 3.3.2 电气连接9 3.3.2.1 电源连接10 3.3.2.1.1 交流电源或电器连接10 3.3.2.1.2 电源连接-低压直流供电(选项)10 3.3.2.2 传感器的连接10 3.3.2.3 报警触点接线10 3.3.2.4 模拟输出接口10 3.3.2.5 RS-232接口（选项）10 3.4 仪器的操作11 3.4.1 仪器的开启11 3.4.2 显示的设置11 3.4.3 按键功能11 3.4.4 运行状态12 3.4.4.1 查看露点模式12 3.4.4.2 报警12 3.4.4.3 开始校准13 3.4.4.3.1 量程校准模式13 3.4.4.3.2 单点自校正，手动或定期13 3.4.4.4 查看序列号模式14 3.4.5 设置状态14 3.5 能复位的声光报警（选项；NFPA兼容）15 3.6 仪器的故障排除15 3.7 维护16 词汇表（已忽略；详见英文手册）-- 附录A：用户操作过程流程图16 附录B：设置状态下的用户操作流程图18 附录C：传感器机械图（外形尺寸图）19 附录D：传感器可选的外形结构图20 附录E：8800系列微量水分析仪壳体与电路板尺寸图21附录F：传感器量程/校准及工作原理24 附录G：露点响应时间分析25 附录H：样气过滤器的注意事项26 附录I：8800系列微量水分析仪的接地注意事项27 附录J：露点与模拟输出的关系28 附录K：RS-232C接口协议（已忽略；详见英文手册）-- 附录L：8800系列更换传感器的步骤29 附录M：LBS & ppmV计算中的不确定性29 附录N：采集系统的组成装配图30 索引附录（已忽略；详见英文手册）--1. 8800系列微量水分析仪的概述8800系列微量水分析仪是基于微处理器技术设计，用于测量气体中的水分含量从-100℃ to +20℃范围，露点的量程取决于传感器的订购。

User Guide BlackBerry 8800 SmartphoneSWD-280419-022*******-001ContentsBlackBerry basics (9)Switch applications (9)Assign an application to a Convenience key (9)Set owner information (9)Turn on standby mode (9)About links (9)Create a link for a PIN (10)BlackBerry basics shortcuts (10)BlackBerry basics troubleshooting (10)Shortcuts (11)BlackBerry basics shortcuts (10)Phone shortcuts (11)Media shortcuts (11)Message shortcuts (12)Typing shortcuts (13)Search shortcuts (13)Attachment shortcuts (13)Browser shortcuts (14)Map shortcuts (15)Calendar shortcuts (15)Phone (17)Phone basics (17)Emergency calls (19)Volume (19)Voice mail (20)Speed dial (20)Conference calls (21)Caller ID (22)Call logs (23)Call waiting (24)Call forwarding (25)Call blocking (27)Fixed dialing (27)Smart dialing (29)TTY support (30)Multiple phone numbers (31)Phone options (31)Phone shortcuts (11)Phone troubleshooting (33)Voice dialing (35)Make a call using a voice command (35)Dial an extension using a voice command (35)Check your phone number using a voice command (35)Check the wireless coverage level using a voice command (35)Check the battery power level using a voice command (35)Change the voice dialing language (35)Turn off choice lists for voice commands (36)Turn off voice prompts (36)Set playback options for voice dialing (36)Set the matching sensitivity level for voice commands (36)Improve voice recognition of numbers (37)Voice dialing troubleshooting (37)Media (39)Transferring and downloading media files (39)Playing media files and recording voice notes (41)Managing media files (43)Viewing pictures (47)Managing pictures (48)Media card options (50)Media shortcuts (11)Media troubleshooting (52)Messages (55)Message basics (55)Email messages (60)PIN messages (67)SMS text messages (68)MMS messages (71)Message list options (75)Message shortcuts (12)Message troubleshooting (80)Typing (85)Typing basics (85)Typing input methods (87)Spelling checker (88)Custom dictionary (90)AutoText (91)Typing shortcuts (13)Typing troubleshooting (93)Search (95)Messages, attachments, and web pages (95)Organizer data (97)Search shortcuts (13)Attachments (99)Attachment basics (99)Document attachments (101)Spreadsheet attachments (101)Media attachments (102)Presentation attachments (103)vCard contact attachments (104)Attachment shortcuts (13)Attachment troubleshooting (105)Synchronization (107)About synchronization (107)Reconcile email messages over the wireless network (107)Delete email messages over the wireless network (107)Prerequisites: Wireless data synchronization (108)Synchronize organizer data over the wireless network (108)About synchronization conflicts (108)Manage email reconciliation conflicts (108)Manage data synchronization conflicts (109)About backing up and restoring device data (109)Prerequisites: Wireless data restoration (109)Delete all device data (109)Empty the deleted items folder on your computer from your device (109)Synchronization troubleshooting (110)Browser (113)Browser basics (113)Browser bookmarks (117)Web feeds (119)Browser options (121)Browser security (124)Browser push (126)Browser shortcuts (14)Browser troubleshooting (128)Applications (129)Add an application (129)View properties for an application (129)Delete a third-party application (129)Receive a device password prompt before you add an application (129)View the size of an application database (129)About upgrading the BlackBerry Device Software (130)Prerequisites: Upgrading the BlackBerry Device Software over the wireless network (130)Upgrade the BlackBerry Device Software (130)Return to the previous version of the BlackBerry Device Software (130)Delete the previous version of the BlackBerry Device Software (131)Application troubleshooting (131)Maps (133)Map basics (133)Navigation (134)Maps bookmarks (135)Map options (136)Map shortcuts (15)Maps troubleshooting (138)GPS technology (139)About GPS technology (139)Get your GPS location (139)Prevent others from tracking your location (139)GPS technology troubleshooting (139)Contacts (141)Contact basics (141)Customizing contacts (143)Categories (144)Mailing lists (146)Multiple address books (147)SIM card phone book (148)Contact list options (149)Contact troubleshooting (150)Calendar (151)Calendar basics (151)Meetings (153)Calendar options (155)Multiple calendars (158)Calendar shortcuts (15)Calendar troubleshooting (159)Tasks (161)Task basics (161)Categories (144)Task list options (164)Memos (167)Memo basics (167)Categories (144)Memo list options (169)Alarm (171)About the alarm (171)Turn on the alarm (171)Silence the alarm (171)Calculator (173)Use the calculator (173)Convert a measurement (173)Bluetooth technology (175)Bluetooth technology basics (175)Bluetooth technology options (177)Bluetooth technology troubleshooting (180)Date and time (183)Set the date and time (183)Get the date and time from the wireless network automatically (183)Date and time troubleshooting (183)Notification profiles (185)Notification basics (185)LED notification (187)Custom notification (188)Notification profile troubleshooting (190)BlackBerry Messenger (191)Contacts (191)Conversations (193)Availability (195)Display and keyboard (197)Backlighting (197)Display options (198)Keyboard options (199)Themes (200)Display troubleshooting (201)Language (203)Change the display language (203)Add a display language (203)Delete a display language (203)About typing input languages (203)Change the typing input language (88)Switch typing input methods (87)Turn off the shortcut for switching typing input languages (204)Change the input options for SureType technology (204)Change the voice dialing language (35)Change the display options for contacts (149)Language troubleshooting (205)Wireless network coverage (207)Find information about wireless coverage indicators (207)Turn off a wireless connection (207)Network connection indicators (207)Turn on wireless coverage notification (188)Check the wireless coverage level using a voice command (35)About the preferred wireless network list (208)Add a wireless network to the preferred wireless network list (208)Change the order of preferred wireless networks (209)Delete a wireless network from the preferred wireless network list (209)Turn off data service (209)About roaming (210)Switch wireless networks manually (210)Verify the status of network connections and services (210)Wireless network coverage troubleshooting (210)Power, battery, and memory (213)Turn off your device (213)Set your device to turn on and turn off automatically (213)Check the battery power level (213)Check the battery power level using a voice command (35)Reset the device (213)Extend battery life (213)View the amount of available memory on your device (214)Best practice: Optimizing your device performance (214)SIM card (215)About the SIM card phone book (148)Add a contact to your SIM card (148)Copy contacts from your SIM card to your address book (148)Copy a contact from your address book to your SIM card (148)Change a SIM card contact (149)Delete a SIM card contact (149)Store SMS text messages on your SIM card (69)About SIM card security (216)Protect your SIM card with a PIN code (217)Change the SIM card PIN code (217)Change the display name for a phone number (217)Security (219)Security basics (219)Password keeper (220)Encryption (222)Memory cleaning (224)Certificates (225)Certificate servers (231)Key stores (233)Smart cards (235)Software tokens (238)About PGP keys (238)About security self-tests (239)Verify security software (239)Security troubleshooting (239)Third-party application control (241)About permissions for third-party applications (241)Reset connection permissions for third-party applications (241)About direct Internet connections for third-party applications (241)Set up a direct Internet connection for a third-party application (241)Set permissions for a third-party application (241)Connection permissions for third-party applications (242)Interaction permissions for third-party applications (242)Data permissions for third-party applications (243)BrickBreaker (245)About BrickBreaker (245)BrickBreaker capsules (245)BrickBreaker scoring (246)Play BrickBreaker (246)Adjust the volume (19)Set the paddle speed (246)Submit a score to the BrickBreaker high score web site (247)Check the high scores on the BrickBreaker web site (247)Service books (249)About service books (249)Accept a service book (249)Delete a service book (249)Troubleshooting (251)BlackBerry basics troubleshooting (10)Phone troubleshooting (33)Voice dialing troubleshooting (37)Media troubleshooting (52)Message troubleshooting (80)Typing troubleshooting (93)Attachment troubleshooting (105)Synchronization troubleshooting (110)Browser troubleshooting (128)Application troubleshooting (131)Maps troubleshooting (138)Contact troubleshooting (150)Calendar troubleshooting (159)Bluetooth technology troubleshooting (180)Date and time troubleshooting (183)Notification profile troubleshooting (190)Display troubleshooting (201)Language troubleshooting (205)Wireless network coverage troubleshooting (210)Security troubleshooting (239)Diagnostic reports (263)Glossary (265)Legal notice (269)BlackBerry basicsSwitch applications1.In any application, press the Menu key.2.Click Switch Application.3.Perform one of the following actions:•If the application that you want to switch to appears, highlight an application and press the Enter key.•If the application that you want to switch to does not appear, highlight Home Screen and press the Enter key.Assign an application to a Convenience keyYour BlackBerry® device has one Convenience key on the left side of the device. Depending on your theme, you might not be able to change the application that is assigned to a Convenience key.1.In the device options, click Screen/Keyboard.2.Set the Convenience Key Opens field.3.Press the Menu key.4.Click Save.Set owner informationOwner information appears on your BlackBerry® device screen when the device is locked.1.In the device options, click Owner.2.Type your contact information.3.Press the Menu key.4.Click Save.Turn on standby modeIf you are not on a call, you can turn on standby mode to avoid pressing keys accidentally when you are not using your BlackBerry® device. Hold the Mute key.To turn off standby mode, press the Mute key again.About linksLinks appear on your BlackBerry® device as underlined text. You can have links to various items such as phone numbers, web sites, and email addresses and can use these links to make calls, visit web sites, or start composing messages quickly.Create a link for a PINYou can create a link for a PIN in messages, calendar entries, tasks, or memos. If you click the link, you can send a PIN message. When typing text, type pin: and the PIN.BlackBerry basics shortcuts•To move the cursor, roll the trackball.•To move back a screen, press the Escape key.•To move to a list item or menu item, type the first letter of the item.•To select or clear a check box, press the Space key.•To view available values in a field, press the Alt key.•To switch applications, hold the Alt key and press the Escape key. Continue to hold the Alt key and highlight an application.Release the Alt key.•To return to the Home screen or application list, press the End key.•To delete a highlighted item, press the Backspace/Delete key.BlackBerry basics troubleshootingNo application opens when I press a Convenience keyVerify that you have not deleted the application that you assigned to the key.Assign a different application to the key.Some features are not available on my deviceDepending on your wireless service plan or the type of email account that is associated with your BlackBerry® device, some features might not be available on your device.If your device is associated with an email account that uses a BlackBerry® Enterprise Server, your organization might not have set up some features or might prevent you from using some features or options. If an administrator has set an option for you, a red lock indicator appears beside the option field.For more information about the features that are available on your device, contact your wireless service provider or administrator.ShortcutsBlackBerry basics shortcuts•To move the cursor, roll the trackball.•To move back a screen, press the Escape key.•To move to a list item or menu item, type the first letter of the item.•To select or clear a check box, press the Space key.•To view available values in a field, press the Alt key.•To switch applications, hold the Alt key and press the Escape key. Continue to hold the Alt key and highlight an application.Release the Alt key.•To return to the Home screen or application list, press the End key.•To delete a highlighted item, press the Backspace/Delete key.Phone shortcuts•To answer a call, press the Send key.•To insert a plus sign (+) when typing a phone number, press the O key.•To add an extension to a phone number, press the X key. Type the extension number.•To set up speed dial for a contact, on the Home screen or in the phone, hold a key.•To turn on the speakerphone during a call, press the Speakerphone key. To turn off the speakerphone during a call, press the Speakerphone key.•To switch the audio path to wired headphones during a call, press the Speakerphone key. To switch back to the previous audio path, press the Speakerphone key again.•To check your voice mail, hold 1.•To type a letter in a phone number field, press the Alt key and the letter key.•To view your contact list in the phone, hold the Send key.•To switch phone numbers, in the phone, click your active phone number. Click a phone number.Media shortcuts•To pause a video or song, press the Mute key. To resume playing a video or song, press the Mute key.•To move to the controls at the bottom of the screen when you are viewing a list of songs, press the Space key.•To play the next song in a category, press N.•To play the previous song in a category, press P.•To rotate a picture, press L.•To zoom in to a picture, press 3. To zoom to the original picture size, press 7.•To zoom out from a picture, press 9. To zoom to the original picture size, press 7.•To fit a picture to the screen size, press 1.Message shortcutsIn a message•To reply to a message, press R.•To reply to all in an email message or a PIN message, press L.•To forward a message, press F.•To file a highlighted email message, press I.•To view the email address of a contact, highlight the contact in an email message. Press Q. To view the display name, press Q again.•To move to the last cursor position after you close and reopen a received email message or PIN message, press G.In a message list•To open a highlighted message, press the Enter key.•To compose a message from a message list, press C.•To mark a message as opened or unopened, press the Alt key and U.•To view received messages, press the Alt key and I.•To view sent messages, press the Alt key and O.•To view voice mail messages, press the Alt key and V.•To view SMS text messages, press the Alt key and S.•To view call logs, press the Alt key and P.•To view all your messages, press the Escape key.Move around a message list•To move up a screen, press the Shift key and the Space key.•To move down a screen, press the Space key.•To move to the top of a message list, press T.•To move to the bottom of a message list, press B.•To move to the next date, press N.•To move to the previous date, press P.•To move to the next unopened item, press U.•To move to the next related message, press J.•To move to the previous related message, press K.Typing shortcuts•To insert a period, press the Space key twice. The next letter is capitalized.•To capitalize a letter, hold the letter key until the capitalized letter appears.•To type the alternate character on a key, press the Alt key and the character key.•To type an accented or special character, hold the letter key and roll the trackball to the left or right. For example, to type ü, hold U and roll the trackball to the left until ü appears. Release the letter key when the accented or special character appears.•To type a number in a number field, press a number key. You do not need to press the Alt key.•To type a number in a text field, hold the Alt key and press the number key.•To turn on NUM lock, press the Alt key and the Left Shift key. To turn off NUM lock, press the Shift key.•To turn on CAP lock, press the Alt key and the Right Shift key. To turn off CAP lock, press the Shift key.•To switch typing input languages, in the device options, on the Language screen, verify that the Use Input LanguageShortcut field is set to Yes. Hold the Alt key and press the Enter key. Continue to hold the Alt key and highlight a language.Release the Alt key.Insert symbols•To insert an at sign (@) or a period (.) in an email address field, press the Space key.•To type a symbol, press the Symbol key. Type the letter that appears below the symbol.Work with text•To highlight a line of text, press the Shift key and roll the trackball up or down.•To highlight text character by character, hold the Shift key and roll the trackball left or right.•To cancel a text selection, press the Escape key.•To cut highlighted text when typing, press the Shift key and the Backspace/Delete key.•To copy highlighted text when typing, press the Alt key and click the trackball.•To paste highlighted text when typing, press the Shift key and click the trackball.Search shortcuts•To search for a contact in a list of contacts, type the contact name or initials separated by a space.•To search for text in a message, press S.•To search for text in an attachment or on a web page, press F.•To search for text in a presentation attachment, verify that you are viewing the presentation in text view or in text and slide view.Press F.Attachment shortcuts•To search for text in an attachment, press F.•To move to the last cursor position after closing and reopening an attachment, press G.In a spreadsheet•To move to a specific cell, press G.•To view the content of a cell, press the Space key.•To switch worksheets, press V. Highlight a worksheet. Press the Enter key.•To view hidden columns or rows, press H. To hide the columns or rows, press H.In a presentation•To switch presentation views, press M.•To move to the next slide, verify that you are viewing the presentation in slide view. Press N.•To move to the previous slide, verify that you are viewing the presentation in slide view. Press P.•To move to the last cursor position after closing and reopening a presentation attachment, verify that you are viewing the presentation in text view or in text and slide view. Press G.Browser shortcuts•To insert a period (.) in the web address field, press the Space key.•To insert a slash mark (/) in the web address field, press the Shift key and the Space key.•To stop loading a web page, press the Escape key.•To close the browser, hold the Escape key.On a web page•To switch between Column view and Page view, press Z.•To move to a specific web page, press G.•To return to the home page, press H.•To open the bookmark list, press K.•To add a bookmark, press A.•To view a list of web pages that you have visited recently, press I.•To refresh a web page, press R.•To view the web page address for a link, highlight a link. Press L.•To view the web page address for a web page, press P.•To save a web page to a message list, press S.•To follow a link, highlight or pause on the link. Press the Enter key.•To hide the banner, press U. To view the banner, press U.•To open the browser options, in the browser, press O.•To hide the browser, press D.Navigate a web page•To move up a screen, press the Shift key and the Space key.•To move down a screen, press the Space key.•To move to the top of a web page, press T.•To move to the bottom of a web page, press B.Map shortcuts•To zoom in to a map, press I.•To zoom out from a map, press O.•To view status information at the top of a map, press U. To hide status information at the top of a map, press U.•To view tracking information at the bottom of a map, press the Space key. To hide tracking information at the bottom of a map, press the Space key.•To move to the next direction on a route, press N.•To move to the previous direction on a route, press P.Calendar shortcutsFor shortcuts to work in Day view, in the general calendar options, change the Enable Quick Entry field to No.•To schedule an appointment, press C.•To change to Agenda view, press A.•To change to Day view, press D.•To change to Week view, press W.•To change to Month view, press M.•To move to the next day, week, or month, press the Space key.•To move to the previous day, week, or month, press the Shift key and the Space key.•To move to the current date, press T.•To move to a specific date, press G.PhonePhone basicsFind your phone numberIn the phone, your phone number appears at the top of the screen. If you have more than one phone number associated with your BlackBerry® device, your active phone number appears at the top of the screen.Make a call1.On the Home screen or in the phone, perform one of the following actions:•Type a phone number.•Type part of a contact name. Highlight a contact or phone number.2.Press the key.To end the call, press the key.Answer a second call1.Press the Menu key.2.Perform one of the following actions:•To answer the incoming call and place the current call on hold, click Answer - Hold Current.•To answer the incoming call and end the current call, click Answer - Drop Current.To return to the first call, press the Menu key.Click Swap.Mute a callDuring a call, press the Mute key.To turn mute off, press the Mute key again.Place a call on hold1.During a call, press the Menu key.2.Click Hold.To resume a call, press the Menu key. Click Resume.Turn on the speakerphoneDuring a call, press the Speakerphone key.To turn off the speakerphone, press the Speakerphone key again.Do not hold the BlackBerry® device near your ear while you use the speakerphone. Hearing damage can occur. For more information, see the safety and product information booklet for your device.Dial an extension1.Press the X key.2.Type the extension number.Dial using numbers or lettersWhen you type a letter in a phone number, your BlackBerry® device dials the number that is associated with the letter on a conventional phone keypad.•To type a number, press a number key.•To type a letter, hold the Alt key. Press the letter key.Switch applications during a call1.During a call, press the Menu key.2.Click Home Screen.Note: If you switch to a different application and you want to end the call, press the End key.Make a call when the device is lockedVerify that dialing from the Lock screen is turned on.1.On the Lock screen, press the Enter key.2.Click Place Call.3.Perform one of the following actions:•Type a phone number.•Type part of a contact name. Click a contact or phone number.4.Press the Send key.To end the call, press the End key.About using a headsetYou can purchase an optional headset to use with your BlackBerry® device.In the phone, you can use a headset button to answer or end a call, or turn on or turn off mute during a call. You can also use a headset button to make a call using a voice command.Depending on your headset, you might also be able to use a headset button to pause, resume, skip, or adjust the volume of a song or a video in the media application.For more information about using the headset, see the documentation that came with your headset.Emergency callsAbout emergency callsYour BlackBerry® device is designed to make emergency calls even when it is locked or the SIM card is not inserted. If the connection to the wireless network is turned off when you initiate an emergency call, your device is designed to connect to the wireless network automatically. If you are outside of a wireless coverage area and the SOS wireless coverage indicator appears, you can only call emergency numbers.You can only make emergency calls by typing official emergency access numbers (for example, 911 in North America or 112 in countries that are part of the European Union).Make an emergency call•If your keyboard or BlackBerry® device is unlocked, in the phone, type the emergency number. Press the Send key.•If your keyboard or device is locked, press the Enter key. Click Emergency Call. Click Yes.VolumeAdjust the volume•To increase the volume, press the Volume Up key.•To decrease the volume, press the Volume Down key.Change the default volume for callsYou can increase or decrease the default volume for calls. The higher the volume percentage, the louder the volume.1.In the phone, press the Menu key.2.Click Options.3.Click General Options.4.Change the Default Call Volume field.5.Press the Menu key.6.Click Save.Improve sound quality during a callYou can only change sound quality for the earpiece on your BlackBerry® device.1.During a call, press the Menu key.2.Click Enhance Call Audio.3.Select a bass or treble option.Improve sound quality for all callsYou can only change sound quality for the earpiece on your BlackBerry® device.1.In the phone, press the Menu key.2.Click Options.3.Click General Options.4.Change the Enhance Call Audio field.5.Press the Menu key.6.Click Save.Voice mailCheck your voice mailVerify that you have a voice mail access number.Depending on your theme, you might be able to check your voice mail from the Home screen.1.In the phone, press the Menu key.2.Click Call Voice Mail.Change the voice mail access numberIf a voice mail access number is not already set on your BlackBerry® device, you can type the access number for a different voice mail system. If you have more than one phone number associated with your device, you can only set the voice mail access number for the active phone number.1.In the phone, press the Menu key.2.Click Options.3.Click Voice Mail.4.Type a voice mail access number and a password.5.Press the Menu key.6.Click Save.Speed dialSet up speed dial for a contact1.In the phone, press the Menu key.2.Click View Speed Dial List.3.Click an unassigned key.4.Click New Speed Dial.。

十、运行操作软件说明：当计算机进入windows后，并双击“回流焊图标”。

将显示下图画面此界面是设备的主监控界面，主界面是监控和操作设备的重要窗口，主界面可对设备的运行动画和工作状态进行操作和监控。

在监控画面里可以监控设备的运行数据、运行动画和操作设备的工作状态。

注：此界面支持操作员密码功能，当密码打开时才能对设备进行操作和参数设置，否则只能监控设备运行情况，密码关闭时快捷菜单和下拉菜单都为无效灰白色，不能进行操作。

密码打开时快捷菜单和下拉菜单都为有黑色，可以进行操作。

输入打开密码方法：单击密码锁快捷图标，将出现输入安全密码对话框，在对话框里输入安全密码即可，关闭密码方法：单击密码锁快捷图标，快捷按钮又变成灰白色。

语言选择功能：可直接在文件/语言/中进行中文简体、中文繁体、英文切换。

在转换得时候可能会出现乱码，一般从新启动软件即可，如果还是不能解决可能是您系统没有相应得子库。

在英文系统下中文一定会出现乱码属正常。

运行参数设置：单击参数设定弹出参数设定画面在运行参数设定画面里可以对每个温区的加热温度、网链的运输速度、以及预热、升温的焊接风机的速度进行设定。

此画面的参数可以保存，以便以后焊接同样的PCB时可以直接调用，不必逐一修改，操作方法：如下图：打开设定窗口，点击“另存”图标将弹出“另存”窗口，输入相应的文件名即可保存。

下次使用时要调出存储的运行参数：单击“打开”图标，选择相应得文件名即可打开，单击“确定”图标便可把参数下载到PLC运行。

此画面为防止非相关操作人员错误操作，设有保护密码，（出厂时未设密码）客户可根据需要设置密码，点击“修改密码”降弹出输入密码画面，在此画面里输入密码确定即可，在下次设定此参数时将提示你输入操作密码.在设置下拉菜单里单击PID参数设置将出现PID参数设置画面。

PID参数是温度控制的重要参数，准确设定PID的参数为控制温度的必要条件。

在PID 参数中P I为最重要的参数，D值设定：此值为提前PID控制温度， ( 如设定温度为 260 ，D值为10；即当温度升到250度开始PID占空比控制一般D值在10-60之间。

+GF+ SIGNET 3-8800 Conductivity TransmitterInstruction ManualGEORGE FISCHER +GF+SAFETY INSTRUCTIONS1.Do not remove from pressurized lines.2.Do not exceed maximum temperature/pressurespecifications.3.Do not install/service without followinginstallation instructions (see sensor manual). 4.Wear safety goggles and faceshield duringinstallation/service.5.Do not alter product construction.6.Failure to follow safety instructions could resultin severe personal injury!Chapter Page 1Introduction1 1.1Description12Calibration3 2.1Wet Calibration3 2.2Calibration Procedure4 2.3Installing Optional Display Board5 2.4Display Board Range Adjustment63Installation7 3.1General7 3.2Positioning7 3.3In-Line Installations8 3.4In-line Fitting Options8 3.5Submersible Installations10 3.6Electrical Installation11 4Conductivity Sensor Maintenance13 4.1Maintenance Tips13 4.2Replacement Parts14 4.3Troubleshooting Guide15 Specifications16Dimensional View17Warranty18Table of ContentsUnpacking and InspectionThe following items are included in your Conductivity transmitter package:• 8800 Conductivity Transmitter 3-8800.103-XX • Instruction manual 3-8800.090Please fill out and return the warranty card as soon as possible.Warranty recordFor your protection, record the purchase informa-tion for future reference. The serial number decal is located within the enclosureModel: +GF + SIGNET 8800 Conductivity TransmitterPurchase date:__________________________Serial number:__________________________Purchased from:_________________________Purchase order number:___________________-XX Refers to electronic range options:-1P= 0 to 20 µS, 0.5 cell -2P= 0 to 200 µS, 0.5 cell -3P= 0 to 2,000 µS, 2.0 cell -4P= 0 to 10,000 µS, 2.0 cellChapter 1IntroductionThis manual contains description, instructions and specifications for the installation, calibration and care of the +GF + SIGNET 8800 Conductivity Transmitter. Should you require further assistance,please contact your +GF + SIGNET dealer.1.1 DescriptionThe +GF + SIGNET 8800 Conductivity system is used in conjunction with an insertion type sensor that continuously measures the conductivity (total dissolved solids or gases) of a solution in a wide variety of process applications.The Conductivity Transmitter consists of aconductivity sensor and an electronics package (transmitter). The electronics package is housed in a NEMA 4X/IP65 enclosure.The +GF + SIGNET 8800 transmitter system can be converted for submersible applications such as water wells, tanks etc. Optional submersion kit,p/n 3-2700.391 includes the necessary parts and assembly instructions for extending the sensor length up to 12 ft. The submersible kit requires a 3/4 inch pipe with male NPT threads on both ends, (user supplied) that is used to physically extend the sensors' length.1The submersion kit also requires an extended cable, (purchased separately) which is used to interface the sensor to the electronics. Optional extension cable p/n 3-8800.261-XX (-03, -06, -09 or -12 ft.). Refer to Figure 1 below:2Figure 1 Transmitter submersion kit and required extension cable.Chapter 2Calibration2.1 Wet CalibrationYour 8800 Conductivity transmitter has been electronically calibrated at the factory before shipment. You will need to perform a wetcalibration to compensate for electrode variations.Wet calibration compares the output of thetransmitter against the conductivity value of a test solution.Wet Calibration should be performed while the 8800 Conductivity transmitter is beingpermanently installed. When done carefully, you can trim the transmitter accuracy to within ±1% of full scale.3Figure 2Adjustment pots and connectorsEquipment Required• Small screwdriver• Power supply (10 to 30 VDC)• Ammeter2.2 Calibration Procedure1.Connect power supply to transmitter input placing an ammeter in series with the input power, see Figure 3.4Figure 3Transmitter Hook-up2.With the Conductivity electrode in the air (0 conductance) adjust the Zero pot (R26) for 4.00 mA.3.Place the electrode into a solution of known conductance and adjust the Span pot (R17) for the corresponding mA value.4.Remove the sensor from solution and verify that the sensor reads 4.00 mA.5.Repeat steps 2 through 4 as necessary.mA =[(Known Cond./Full Scale Cond.) • 16 mA] + 4 mA NOTE:The current output can be monitored in several ways (see Figure 8)5Figure 4Display BoardInstallation Drawing part no. 3-8000.3902.3 Installing Optional Display BoardThe addition of the display board option (p/n 3-8000.390) to the conductivity transmitter is done in the following manner.1. Remove snap-on cover allowing access to the P4 connector.2. Plug the four conductor ribbon cable into the P4 connector, see Figure 4.3. If necessary use a small blade (e.g Exacto knife)to remove any conformal coating from the standoff holes or calibration pot access holes.4. Carefully snap the display board onto the three standoffs.5. Re-calibrate the instrument as explained in section 2.2.62.4 Display Board Range AdjustmentThe display board displays from zero to one hundred percent of range. This PCB has aone-point calibration which may need to be done at installation.1. Re-calibrate per section2.22. Calculate percentage of full scale and adjust Range pot on display board so that the display shows the proper percent of Full Scale.Model no. Full Range 3-8800.103-1P 20 µS 3-8800.103-2P 200 µS 3-8800.103-3P 2,000 µS 3-8800.103-4P 10,000 µSZERO SPANInterface cableconnection to main PC board. Located on underside of LCD boardRange Potentiometer;Located on underside of LCD board. Can be adjusted through the hole in the electronics housing.Figure 5Range Potentiometer LocationT he display board drawsapprox. 200 µA of current.When added, the transmitter requires recalibration.(Solution value ÷ Full Range) • 100 = Percentage3.1 GeneralThis transmitter may be installed in harshenvironmental locations. However, when possible the transmitter should be located so as to minimize the effects of temperature gradients and to avoid vibration and shock.3.2 PositioningIn order to achieve good repeatable results care must be taken in the placement of the sensor. It is important that the sensor electrodes are fully immersed in the process fluid. Flow rates around the sensor must be limited so as not to produce air pockets which will affect the signal path through the fluid. We recommend that you do not mount completely upside-down as sediments may become trapped in the sensor and that you do not mount at the very top of the pipe because the pipe might not always be full.7The information provided on sensor positioning are recommendations only. The primary consideration is that the electrodes are in full contact with the process fluid.If sediments are present we recommend avoiding the 6O'clock position. Figure 6I n-line Sensor Positioning DiagramChapter 3Installation3.3 In-Line InstallationsThe 8800 Conductivity transmitter sensor system is designed for installation into a pipe using standard +GF + SIGNET fittings, (up to 4 inch) or the optional +GF + SIGNET pipe adaptor fitting (p/n P31515-0V200). Refer to section 3.4 for additional information.3.4 In-line Fitting Options These fittings provide the proper installation parameters that are critical to the calibration of the conductivity system.Fitting Installation/Plastic Fittings Tees:•All tee fittings sold by +GF + SIGNET are "glue-on" type except for the PVDF tees which are thermally fused. Be aware that PVC and CPVC tees require different types of primer and cement.•Tee fittings are available for pipes from 0.5 to 4 inches in diameter.Saddles:•Plastic "glue-on" saddles are available for lines from 2 to 4 inches in diameter.•2 to 4 inch "glue-on" saddles require a 1-7/16inch hole in the pipe. (O-ring not used with glue-on type)•The hole must be completely deburred to be free of any projections.•When assembling plastic saddles, the arrows on the wedges must match the direction of the arrows on the pipe saddle.Misc:+GF + SIGNET also offers a pipe adaptor specifically designed for installing +GF + SIGNET analytical sensors into in-line applications8Caution: Wheninstalling saddlefittings, depressur-ize and drain pipebefore drilling fitting hole.+GF + SIGNETplastic "glue-on" Tee Fitting+GF + SIGNET Plastic"glue-on" Saddle Fitting(p/n P31515-0V200). This pipe adaptor can be installed in any standard 1-1/4 inch FNPT pipe fitting.Fitting Installation/Metal FittingsWelded fittings MUST be installed by a certified welder.The plastic sensor insert in the Weldolet fitting MUST be removed during the welding process.When reinstalled, it is important that the insert be threaded to the proper height "H" dimension to ensure full insertion of the sensor electrodes,see page 10.• 2 to 4 inch Weldolet fittings require a 1-7/16inch hole in the pipe.•The hole must be completely deburred to be free of any projections before installing the Weldolet fitting.Pipe Tees: Metal Pipe Tees are available for 0.5to 2 inch metal pipes. Materials include iron,carbon steel, stainless steel, and copper or bronze. All tees are threaded with NPT threads except for copper and bronze tees, which have solder or braze type fittings.•Use thread sealant compound on fittings with threaded connections.9+GF + SIGNET "weld-on"Weldolet Fitting +GF + SIGNET Metal Pipe Tee Fitting+GF+ SIGNET Weldolet Fitting103.5 Submersible InstallationsThe 8800 Conductivity transmitter sensor system can be made submersible through the use of the submersible kit p/n 3-2700.391 and extension cable, p/n 3-8800.261-XX (-XX designates overall cable length from -01 to -12 ft., see Figure 1.3.6 Electrical InstallationThe transmitter has a 1/2 inch conduit opening for power/signal wiring, see Figure 7.The sensor input connection is located on the lower PCB (below optional Display PCB). To access the connector, remove the housing cover followed by the electronics cover (snap on/off).The connector is now accessible between theFigure 78800 ConductivityTransmitter In-lineInstallation11Signal wiring should not run in conduitor in open trays with HVAC wiring and should not be run near heavy electrical equipment. Leads should be color coded for polarity identification.The conduit connection on the transmitter housing should be sealed or plugged to avoid accumula-tion of moisture in the housing. If the conduit is not sealed, the transmitter should be mounted with the opening downward for draining.Signal wiring may be ungrounded or grounded at any place in the signal loop. Power supply regula-tion is not critical. Make sure that the power supply source conforms to the requirements of thetransmitter and that the current rating of the supply is not exceeded, particularly if more than one transmitter is connected to the supply in parallel.NOTE:This transmitter is designed to eliminate ground loops and other electrical interactions between system components even if several transmitters are powered by a common supply in parallel.Make sure that electrical characteristics of the remote output device are compatible with the transmitter output: Total load resistance must not exceed 700 ohms using a 24 VDC power supply. Total load resistance is the sum of the individual resistances of all devices which are connected in series with the signal output lead.Equation:RL = V S -10/0.02where R L = Load Resistance in ohms V S = Supply Voltage 10 = Minimum operating voltage0.02 = 20 mA (maximum current)1213Chapter 4Conductivity Sensor Maintenance 4.1 Maintenance TipsThe electrodes contact the solution and transfer a signal through the solution being measured. It is recommended that the electrodes maintain contact with fluid. If allowed to air dry, precipitates may form on the electrodes causing higher than normal readings and possibly contaminating the process fluid. If precipitates form, the electrodes may be cleaned by immersing the sensor in warm water and scrubbing the electrodes with a soft nylon brush.It is important that the sensor is not exposed to oils which may coat the electrodes. This may seriously affect the readings.In extreme cases it may be necessary to clean the sensor with alcohol to remove oils. Werecommend using a cotton swab and brushing the electrode clean instead of dipping the entire sensor body in acetone.In submersible applications the sensor should be located fully immersed and away from the presence of any bubbles.In some instances it may be necessary to devise a periodic maintenance schedule to clean the electrodes and verify calibration.4.2 Replacement Parts144.3 Troubleshooting Guide Problem Action Cause• Gain pot set too high • Incorrect operating range • Excessive Quiescent current •Application range exceeds the electronics range.•Unit is not properly calibrated•Range pot misadjusted• Check unit model number, see Unpacking and Inspection section (opposite page #1) • Re-calibrate, see page 4 • Re-calibrate display, see page 5•Application range belowthe electronics range • Sensor not connected Display/outputreads off scale •Check unit model number, see Unpacking and Inspection section (opposite page #1)•Check sensor connection Display/outputreads zero(4 mA)• System power or ground OPEN • Check system wiringDisplay is blank/no current • Reduce Gain/Span potadjust• Check unit model number, see Unpacking andInspection section (opposite page #1)• Send for repairTransmitter cannot be calibrated (insufficient Zero adjust)• Incorrect operating range • Unit not calibrated • Output transistor damaged • Check unit model number, see Unpacking andInspection section (opposite page #1)• Re-calibrate, see page 4• Send for repair• Air bubbles contacting sensor • Coated electrodes • Leaking submersion kit• Check installation• Clean sensor, see page 11• Clean/replace cableinstall new seal Transmitter output changes erratically Transmitter cannot be calibrated (insufficient Gain adjust)15Specifications Optional Display:0 - 100%, 2-1/2 digit LCD(factory installation recommended),#3-8020.390Loop power:10 to 30 VDCLoop impedance:•1Ω @ 10 VDC•100Ω @ 12 VDC•1000Ω @ 30 VDCElectronics operating temp:•-15 to 50 °C (5 to 122 °F)Max sensor pressure/temperature:•7 bar @ 20 °C (100 psi @ 68 °F)• 1.7 bar @ 90 °C (25 psi @ 194 °F)Operating ranges:•-1P0 to 20 µS0.05 cell•-2P0 to 200 µS0.05 cell•-3P0 to 2,000 µS 2.0 cell•-4P0 to 10,000 µS 2.0 cellCurrent output:2-wire, 4 to 20 mA signalAccuracy:±1% of rangeRelative Humidity:0 to 95%, non-condensingEnclosure materials:•Electronics enclosure:Glass-filled PP, NEMA 4X/IP65•Enclosure seal:Viton®•Window:PolycarbonateWetted sensor materials:•Sensor body:Glass-filled PP•Electrodes:Titanium•Sensor o-rings (2):Viton®•Optional o-rings:EPR, #1224-0021Kalrez, #1228-0021Immunity:EN50082-1Emissions:EN55011Agency Approvals:CE16Figure 98800 Conductivity TransmitterDimensional Views 2.0 Cell Constant -3 (0 to 2,000 µS)-4 (0 to 10,000 µS)0.05 Cell Constant -1 (0 to 20 µS) -2 (0 to 200 µS)17Warranty Limited Two-Year WarrantySignet Scientific Company warrants its instrumentsto be free from defects in material and workman-ship under normal use for a period of two yearsfrom the date of purchase by the initial owner, orthree years from date of manufacture, whichevercomes first, as described in the followingparagraphs.This warranty does not cover defects caused byabuse or electrical damage. Signet ScientificCompany will not cover under warranty anyinstruments damaged during shipment to thefactory less case or if improperly packed. Repairattempts by anyone other than authorized servicepersonnel will void the warranty. Proof of date ofpurchase will be required before warranty repairscan begin. Transducers and cables will not becovered after installation.Parts which prove to be defective in the first yearwill be repaired or replaced free of chargeincluding labor, shipped F.O.B. our factory or adesignated service center (addresses furnishedupon request).Only non-moving parts, such as electricalcomponents, which prove defective during thesecond year are warranted. Meter movements willnot be covered. All units qualifying for warrantyservice after one year are subject to a servicecharge for replacement of non-moving parts.Items returned for warranty repair must be shippedprepaid and insured. Warranty claims areprocessed on the condition that prompt notificationof a defect is given to Signet Scientific Companywithin the warranty period.18Signet Scientific Company shall have the sole rightto determine whether in fact a warranty situationexists.Signet Scientific Company is continually makingdesign changes and improvements that adapt tothe original circuit configuration. These will beincorporated as required in older units on aminimal charge basis while under warranty.Consequential DamagesSignet Scientific Company shall not be liable forspecial consequential damages of any nature withrespect to any merchandise or service sold,rendered or delivered.This warranty gives you specific legal rights andyou may also have other rights which vary fromstate to state.19+GF + SIGNETSales Offices:USAGeorge Fischer, Inc., 2882 Dow Avenue, Tustin, CA 92780/USA,Tel. (714) 731-8800, Fax (714) 731-6201SwitzerlandGeorg Fischer Rohrleitungssysteme AG, P.O. Box 671, CH-8201 Schaffhausen/Switzerland,Tel. 052/631 1111, Fax 052/631 2830SingaporeGeorge Fischer Pte. Ltd., 15 Kaki Bukit Road 2, KB Warehouse Complex, Singapore 1441,Tel. 65/747 0611, Fax 65/747 0577JapanKubota George Fischer, 2-47 Shikitsuhigashi, 1-Chome, Naniwa-Ku, Osaka, 556-91 Japan,Tel. 816/648 2545, Fax 816/648 2565ChinaGeorg Fischer Ltd., Rm 1503, Business Residence Bldg. of Asia Plaza,2-3 Bldg. No. 5th Qu Anzhenxili, Chaoyang Qu, Beijing 100029, P.R. China,Tel. 86/10 6443 0577, Fax 86/10 6443 0578Australia George Fischer Pty. Ltd., Suite 3, 41 Stamford Road, Oakleigh, Victoria 3166, Australia,Tel. 61/3 9568 0966, Fax 61/3 9568 0988Signet Scientific Company, 3401 Aerojet Avenue, El Monte, CA 91731-2882 U.S.A.,Tel. (626) 571-2770, Fax (626) 573-2057GEORGE FISCHER +GF + Piping Systems© Signet Scientific Company 1992 Printed in U.S.A.PRINTED ON RECYCLED PAPER 3-8800.090B-11/97。

TEMI880中文操作手册温湿度氙灯可程式控制器操作流程图打开电源图1开始图21. 监视画面图2中点击监视画面，显示进入监视画面定值停止程式停止⑤①③②④⑥⑦图3 图4①温度设定值：显示当前温度的设定值；②湿度设定值：显示当前湿度的设定值；③程式编号：显示当前运行程式的编号；④该程式段数：显示当前程式的总段数；⑤温度显示值：显示当前温度的实际值；⑥湿度显示值：显示当前湿度的实际值；⑦时间键：显示当前时间，并按按键，LCD画面就会关闭。

虽然看不到画面，但仍然正常运行。

按画面任何位置就会自动开启。

注：当点击运行时会出现确认信息确认运行确认运行定值运行程式运行⑤①②⑥⑦③图5④图6①温度设定值：显示当前温度的设定值；②湿度设定值：显示当前湿度的设定值；③温度整定：从当前设定温度值，执行或取消自动整定；④湿度整定：从当前设定湿度值，执行或取消自动整定；⑤运行实验名：显示当前运行的程式名称；⑥程式/段数：显示当前运行的程序的程式编号和段的编号；⑦运行时间：显示当前程序已运行的总时间；注：当点击切换时会出现传感器输入信号：0—5V模拟输入信号（AI）：0—5V 模拟输出信号（AO）：4—20MA注：当点击下一页时会出现切换切换图7 图8注：当点击设定时会出现运行任务的设定状态，温度、光照、淋雨、湿度、凝露是5个功能选项按纽，相应的选中的红色即为控制状态。

注：当点击详细时会出现显示当前运行信息的功能状态PV—当前状态的显示值SV—设定状态的设定值MV—出力值2. 操作设定图2中点击操作设定，显示进入操作设定画面图9运行方式：选择运行方式为程式或定值。

停电方式：在运行中停电，复电的模式。

▶停止：停电后复归程式/定值停止。

▶冷起：停电后复归自动从程序起始点运行/定值运行。

▶热起：停电后复归从停电时的段数继续运行/定值运行。

▶FUZZY SELECT：模糊选择。

▶锁定：按键锁定。

注：当点击切换时会出现切换图10温度斜率：定值时温度的升降斜率。

SureCycler 8800梯度PCR仪标准操作流程1．仪器开机打开SureCycler 8800仪器前面的电源开关，在大约1分钟的时间内，仪器进行自检并启动操控系统。

2．主要界面功能介绍2．1操控系统主界面功能2．2操控系统程序设置界面功能2．2．1 程序设置Command List(命令菜单)界面功能介绍3．PCR程序建立3．1 PCR Wizard方法快速PCR程序建立PCR Wizard根据客户选择的DNA聚合酶种类、引物序列、PCR扩增产物长度、DNA 类型等内容确定PCR程序步骤的参数。

(1) 在操控系统主界面点击按钮，进入PCR Wizard向导系统Polymerase Selection Primer Information(2) 在Polymerase Selection界面中，选择实验中采用的DNA聚合酶(分别)，点击“Next”按钮，进入Primer Information(引物序列信息)界面。

(3) 在Primer Information界面中，点击“A、G、T、C”按钮输入引物序列信息，缺少引物序列信息的情况下，输入引物的TM值，输入完成后，点击“Next”按钮进入Product Length(PCR 产物长度)界面。

软件TM值计算方法：TM=69.3+(0.41×GC%)-(650-N)，其中GC%为引物序列GC含量，N为引物长度；PCR程序退火温度的设置为比上、下游引物平均TM值低5℃。

Product Length DNA Source Information(4) 在Product Length界面中，输入PCR扩增产物长度，点击“Next”按钮，进入DNA Source Information(DNA类型信息)界面。

(5) 在DNA Source Information界面中，选择实验中采用的DNA模板类型(分别为cDNA模板、gDNA模板和载体模板)，点击“Next”按钮，进入Adjustments(调整)界面。

一种双组分，低VOC，高固体份，快干型环氧磷酸锌防锈底漆。

产品说明专门设计用于大气环境中的经过喷砂处理的钢结构。

理想用于中等腐蚀环境和需要快速干燥/快速重涂的情况。

设计用途氧化铁红淡光83％干膜厚75-200微米 (3-8密耳) 相当于 湿膜厚90-241微米 (3.6-9.6密耳)在125微米干膜厚度和所述体积固体份的情况下，6.64 平方米/公升在 5 密耳干膜厚度和所述体积固体份的情况下，266 平方英尺/美制加仑允许适当的损耗系数适用于无气喷涂,不要让涂料残留在软管、喷枪或喷涂设备内。

采用国际牌 GTA203(或Ceilcote T410)彻底冲洗所有设备。

一组油漆一经混合，不应再行密封，如果工作中断时间过长，建议重新混合一组涂料，再开始喷涂。

滚涂,不要让涂料残留在软管、喷枪或喷涂设备内。

采用国际牌 GTA203(或Ceilcote T410)彻底冲洗所有设备。

一组油漆一经混合，不应再行密封，如果工作中断时间过长，建议重新混合一组涂料，再开始喷涂。

刷涂涂装数据 INTERDUR 8800颜色光泽体积固体份典型厚度理论涂布率实际涂布率施工方法干燥时间温度表干硬干最小最大推荐面漆重涂间隔5°C (41°F) 8 小时18 小时18 小时 无限制10°C (50°F) 6 小时8 小时8 小时 无限制25°C (77°F) 2 小时 5 小时 5 小时 无限制40°C (104°F)50 分钟2 小时2 小时无限制A组份 25°C (77°F); B组份 27°C (81°F); 混合后 27°C (81°F)1.63 千克/升 (13.6 磅/加仑)法规符合性数据闪点（典型）产品重量挥发性有机化合物关于更多详细资料，请见关于“产品特性”的章节1.70 磅/加仑 (204 克/升)美国环境保护局第24号方法144 克/公斤欧共体溶剂排放指令含量1999年第13号委员会指令185 克/升中国国家标准 GB 23985第1 页，共 4页资料来源10191发行日期：2021/1/12Protective Coatings这个产品的性能取决于表面处理的等级。

黑莓手机8800操作宝典【1- 全键盘区】BB正面除了屏幕正下方一排中央区键以外的所有正面按键。

字母键+空白键+DEL+ENTER：类似pc键盘无需多说；SPACE：空格键，他有几个非常重要的功能–同时也是中文输入的选字键，按一下选下一个字，再回车则选定，非常常用和重要的一个键；在短信、浏览器等浏览界面下，按space有向下翻页的作用，相当于pagedown，如果要向上翻页返回去，住按BB最左下角键+再按space，找短信，看页面会用到，也比较常用；在calendar（日历）界面，space可以进行按日（周、月）翻页，根据你日历当时设置的日（周、月）浏览状态不同；在msn和qq等即时通讯软件下，space键也很重要，选定一个要说话的联系人，按space往往是进入打字界面，经常用到；其他，不一一列举，经常使用慢慢积累，会越来越方便的；alt+enter：切换输入法，关于输入法，后面有大课详细说；alt+字母键（0-9）：在中文输入状态下输入数字,alt+其他字母键则为输入字母键上对应的标点符号；Num+字母键（A-Z）：在中文输入状态下输入大写英文字母（适合大段中文输入，少许英文夹杂情况的输入）；SYM键：特殊字母键，先按sym然后用轨迹球选，或者直接按对应的字母键；钱键/免提键：在全区的右下角附近，有一个颜色特殊黑白脸的就是了，功能是对应货币符号，比如￥，第一次按的时候会提醒你定义，中国人一般用￥即可，另外一个功能是电话免提切换，按一下可以从贴耳转换到免提，声音清晰响亮，遇到私密话题切换回贴耳状态，也属于必须掌握的BB技巧；其他：比如@键，在右上角P对应，alt+P=@，常用，但贴心的BB在默认email输入状态提供了细微的设计–比如在丰富地址本，填写输入某一个联系人的email地址时候，输入完”username”按space即为”@”，再输入”sina”按空格即为”.”，接着输入”com”即可，连按alt的机会都没留给你，此为BB众多体贴入微的细节之一；【2-中央区】键盘正下方的那几个键，不同型号些许不同。

长城徐水底盘阴极电泳生产线操作说明书中国航空规划建设发展有限公司目录一. 生产线概述 (2)二. 生产线设备简介 (2)三. 自行小车操作及维护指导说明 (7)四. 前处理设备操作及维护指导说明 (12)五. 电泳设备操作及维护指导说明 (21)六. 纯水设备的操作及维护指导说明 (30)七. 制冷机组的操作及维护指导说明 (41)八. 烘干炉、强冷室的操作及维护指导说明 (44)九. 输送系统操作及维护指导说明 (46)十. 生产线的维护保养指导 (48)十一. 备品备件清单 (50)一. 生产线概述：本生产线采用间歇输送方式，为浸渍+出槽喷淋通过式前处理设备；由热水洗、预脱脂、脱脂、水洗1、水洗2、纯水洗1、硅烷、纯水洗2、纯水洗3、电泳、UF1、UF2、纯水洗4部分组成。

电泳：将工件浸入槽内作为阴极，通以直流电，电泳漆中的树脂和颜料沉积在工件表面，形成不溶于水的涂层。

设备所在地：保定市徐水县设备内容：1）前处理设备2）电泳设备3）电泳烘干室4）强冷室5）输送设备6）电控设备7）纯水设备8）制冷设备9）超滤设备10）阳极设备11）整流电源加工产品1）材质：钢铁2）组框尺寸：4000*2000*2000（mm）3）单框最大荷载：2T4）单框最大面积：100m2生产纲领1）产能：25万台套车桥及7万台车架2）工作时间：250天/年，2班/天（480分钟/班）设备可动率90% 厂房建筑信息：1）厂房面积长（m）X宽（m）X高（m）：175X24X102）厂房地坪承载能力：5t/ m23）厂房高度：10 m（下弦高度）4）厂房湿度：≤ 80%5）厂房温度：5℃～40℃工艺流程：上工件 ---→热水洗 ---→预脱脂---→脱脂1---→脱脂2---→水洗1---→水洗2---→纯水洗1---→硅烷---→纯水洗2---→纯水洗3---→喷淋加湿---→电泳1 ---→电泳2---→ UF1 ---→ UF2 ---→纯水洗4 ---→吹水 --→下工件 ---→烘干 ---→强冷 ---→转运二．生产线设备简介：（一）自行小车输送系统系统组成a)系统环形输送线：一条。