二竖维护手册(参考版)

设备维护、保养手册(标准版)Safety management is an important part of production management. Safety and production are inthe implementation process( 安全管理 )单位：_________________________姓名：_________________________日期：_________________________精品文档 / Word文档 / 文字可改设备维护、保养手册(标准版)一、设备保养润滑基本标准:1．所有设备的润滑部位，必须使用本工作手册规定的润滑油，不得使用其它规格、牌号的润滑油；不得将不同规格的润滑油混合使用；不得注入使用不清洁、已变质、带腐蚀性的润滑油。

2．清洗更换润滑油标准：将设备内残存的污油清除干净，用柴油或汽油清洗机械部件和轴承，然后再加入新润滑油。

残存污油经检验后，品质符合要求时，污油必须经清理过滤，才能继续使用。

3．初次使用的新设备，运转使用15天左右，必须更换润滑油。

4．使用润滑油的部位，润滑油注入量为部位容积的1/3-1/2：低速运转的，加润滑脂量为2/3；高速运转的，加润滑脂量为1/2。

5．六个月以上没有使用的设备，在重新开机使用前，其润滑部位必须更换润滑油。

6．加油时间和责任工作标准：6.1每班接班后两小时内为当班加油时间，由设备操作工负责加油。

6.2每天白班上午８点至10点为当天的加油时间，由设备操作工负责加油。

6.3小修时的设备加油或更换润滑油工作，由设备操作工负责。

二、通用设备的保养润滑标准：1．摆线针轮减速机的润滑：1.1润滑油选用32#机械油。

1.2润滑油注入量为减速机容积的1/3-1/2，经常观察油位，高度不足时，补充相同牌号的润滑油。

1.3每天连续运行10小时以上者，每3个月（中修时）更换润滑油一次；每天连续运行不足10小时者，每年（大修时）更换滑油一次。

日常维护一级维护二级维护的内容下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。

文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!本店铺为大家提供各种类型的实用资料，如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等，想了解不同资料格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor. I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you! In addition, this shop provides you with various types of practical materials, such as educational essays, diary appreciation, sentence excerpts, ancient poems, classic articles, topic composition, work summary, word parsing, copy excerpts, other materials and so on, want to know different data formats and writing methods, please pay attention!日常维护一级维护二级维护的内容一、日常维护的内容日常维护是保持设备长期正常运转的重要环节，它包括了设备的日常巡检、清洁和润滑等工作。

Citrix Provisioning2209ContentsCitrix Provisioning22093新增功能3已修复的问题4已知问题和注意事项5数据治理6第三方声明9弃用9系统要求和兼容性10许可22为虚拟磁盘配置Microsoft批量许可27体系结构34组件37产品实用程序41管理员角色42集合43 Citrix Provisioning控制台43安装Citrix Provisioning软件组件45安装前需执行的任务47网络组件61安装服务器组件72无提示运行配置向导73安装控制台组件79准备好主目标设备以便构建映像80使用映像向导创建虚拟磁盘83升级86服务器93虚拟磁盘95配置104控制台104场111服务器126设备集合141目标设备143获取引导程序文件151使用Boot Device Management实用程序155通过流技术推送Linux目标设备157关于SAN策略163在目标设备上使用状态托盘164虚拟磁盘167配置虚拟磁盘以实现Active Directory管理176为目标设备分配虚拟磁盘182 Microsoft Azure上的Citrix Provisioning183 Google云端平台上的Citrix Provisioning242 AWS上的Nutanix中的Citrix Provisioning285 VMware云和合作伙伴解决方案287导出设备向导307使用流VM设置向导325使用Citrix Virtual Apps and Desktops设置向导将虚拟桌面部署到VM328预配启用了vGPU的Citrix Virtual Apps and Desktops计算机343 Citrix Provisioning Accelerator346统一可扩展固件接口(UEFI)预启动环境351 Citrix Provisioning由Citrix Cloud进行管理354在目录创建过程中支持多个区域361管理363场364站点364服务器366存储369设备集合373目标设备375虚拟磁盘393为标准虚拟磁盘映像选择写入缓存目标位置398支持复制的虚拟磁盘存储399导出和导入虚拟磁盘401释放虚拟磁盘锁403复制和粘贴虚拟磁盘属性403将现有虚拟磁盘添加到虚拟磁盘池或存储中404备份虚拟磁盘404查看虚拟磁盘使用情况404删除差异磁盘上的缓存405向目标设备分配虚拟磁盘和版本406更新虚拟磁盘410报废或删除虚拟磁盘421虚拟磁盘故障排除421视图424管理角色428高级概念431通过将SQL Server限制到TLS1.2启用安全连接431启用SQL Server AlwaysOn多子网故障转移432 SQL Basic可用性组433同一主机内的存储迁移434管理以实现高可用性435脱机数据库支持435数据库镜像437用于SQL Server2012、2014、2016、2017和2019的SQL AlwaysOn438 Provisioning服务器故障转移439配置使用共享存储的高可用性环境440为实现高可用性配置引导文件442故障排除444日志记录445审核446 API448 CIS问题报告452将VM迁移到新的托管资源457Citrix Provisioning2209December15,2022Citrix Provisioning是软件流技术推送技术，用于通过共享桌面映像向多个虚拟桌面端点传送修补程序、更新和其他配置信息。

2112 Floor LightOPERATIONS/MAINTENANCE MANUAL For Parts or Technical Assistance1-800-327-0770Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembly Instructions2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Counterweight Assembly Illustration3Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hi/Lo Intensity Control4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Focus Control4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Removable Positioning Handles4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Spare Bulb And Fuse Storage4Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Counterweight Assembly Cover5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bulb Replacement5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fuse Replacement5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Schematic6Assembly Drawings and Parts Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Floor Light Final Assembly7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Base Assembly with Casters8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Counterweight Assembly9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Base Cover Assembly10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Head/Arm Post Assembly11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Head/Arm Assembly12Focus Adjustment Ring Assembly13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Focus Assembly14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lens Assembly15Handle Assembly16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Arm Assembly17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Yoke Assembly18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tension Spring Assembly19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hub Assembly20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switch Cover Assembly21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Rotary Switch Assembly22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Post Assembly23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Parts List24 Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Obtaining Parts and Service25Supplemental Warranty Coverage25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Return Authorization26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Freight Damage Claims26Assembly InstructionsThe Adel Minor Surgery Light is packed in two shipping cartons and should be assembled using the following instructions:NOTEAssemble the light on soft, protective material to avoid marring the finish of the light.Required Tools:Phillips Screwdriver3/4” Wrench HammerAssembly Instructions:1. Remove the base, counterweight assembly and head/post assembly from their cartons. Locate the pin-stripe tape on the post (tapered end) and on the base next to the center hole.2. Lay the head/post assembly on the floor with the light head above the post (pinstripe on top). Insert theend of the post into the base by threading the wires through the base center hole. Rotate the post until the pinstripe tape on the base and post are aligned. T ap the bottom of base with a hammer to secure it on the post.3. Attach the counterweight assembly by screwing the 1/2” bolt into the end of the post. The counterweightassembly hangs between the two bottom legs of the base opposite the pinstripe tape. Route the electric wires past the 1/2” bolt into the counterweight assembly area. Support the counterweight assembly with one hand while turning the 1/2” bolt.NOTEThe tab on the counterweight assembly must enter the center hole of the base.4. Ensure the pinstripe tape on the head/post assembly and base are still in alignment. Remove the tape.5. Place the light in the upright position.Counterweight Assembly Instructions (see counterweight assembly illustration on page 3):1. Remove the ground screw and the two washers from the left side of the counterweight assembly. Con-nect the single green ground wire using the following order: screw, washer, wire terminal, washer.2. Attach the black wire to the tab marked #6 on the transformer.3. Attach the red wire to the terminal strip tab with the red wire from the transformer.4. Attach the white wire to the terminal strip opposite the red wires.Transformer Cover and Positioning Handles Assembly Instructions:1. Slide the transformer cover under the edge of the leg base and snap it into position by applying pressureon the outer edge. Fasten it with the #8-32 screw provided. If the cover does not slide under the edge, loosen the bolt at the end of the post, slide the cover under the edge, and re-tighten the bolt.2. Install the positioning handles into the handle sockets on the light head until the spring loaded buttonsnaps into the locking position.Counterweight AssemblyOperating InstructionsHI/LO INTENSITY CONTROLA single knob located on one side of the arm-to-post joint turns the light on and adjusts the light intensity to a low or high level. Select the intensity that provides the best tissue discrimination and minimum eye strain. FOCUS CONTROLThe knob located on the back of the light head provides an adjustment to obtain an optimum area of shadow-less illumination. Readjustment may be required when the distance from the tissue surface changes. the focus knob provides full adjustment in 1 1/2 turns.CAUTIONDo not force the focus knob after it stops turning. Damage to the focusing mechanism may result if the knob is turned more than 1 1/2 turns.REMOVABLE POSITIONING HANDLESA positioning handle is located on each side of the light head. The handles can be easily removed by pressing the spring loaded button and pulling away from the light head. The handles can be autoclaved and reinstalled using sterile techniques.Reorder number (set of 2) - 8815-011-100SPARE BULB AND FUSE STORAGEAn extra bulb and fuse are located in the counterweight assembly at the base of the floor light.Bulb reorder number - 8815-004-500Fuse reorder number - 8815-003-200See page 5 for replacement procedures.Maintenance InstructionsCOUNTERWEIGHT ASSEMBLY COVERWARNINGUnplug the power cord before removing the counterweight assembly cover or personal injury could result. For both fuse and bulb replacement, it is necessary to remove the triangular counterweight assembly cover at the base of the light.To remove the cover: Remove the #8-32 screw. Slightly loosen the 1/2” bolt at the bottom of the post and pull the counterweight assembly cover out away from the center post. This uncovers the transformer, fuse holder, extra fuse and extra bulb and provides access to some of the wiring.When replacing the counterweight assembly cover, DO NOT over-tighten the 1/2” bolt. Light but firm pres-sure should be applied to hold the cover up against the lip of the leg base.BULB REPLACEMENTWARNINGTurn source power off before replacing the bulb or personal injury could result.1. Remove the front shroud.2. Remove the lens from the lens clips. Be careful not to over-bend the clips when removing the lens. Ifthe clips do get over-bent, be sure to straighten them before reinstalling the lens.3. Be sure the burned out bulb is cool, then remove it.4. Install the new bulb, using a clean cloth to handle the bulb. Do not touch the bulb with your bare fingersbecause skin oils cause premature failure of the bulb. Do not move the bulb from side-to-side while installing it; push it straight in.5. Replace the lens, making sure all four clips make secure contact with the lens.6. Replace the shroud.7. Turn the power back on.8. Turn light on to HI to check the light’s performance.Bulb reorder number - 8815-035-800FUSE REPLACEMENTWARNINGTurn the source power off before replacing the fuse or personal injury could result.The spare fuse is mounted next to the transformer in the counterweight assembly at the base of the floor light (see counterweight assembly illustration on page 3).Remove the blown fuse from the fuse holder and replace it with the spare fuse.Fuse reorder number - 8815-003-200Electrical Schematic120 VOLTS, 60 Hz, 1 1/4 AMP RATING105 TO 135 VAC OPERATING RANGEFloor Light Final AssemblyAssembly part number 8815-040-100(reference only)Item Part No.Part Name Qty.1(page 8)Base Assembly with Casters12(page 11)Head/Arm Post Assembly13(page 10)Base Cover Assembly14(page 9)Counterweight Assembly158815-005-700Phillips Hd. Screw168815-040-500Hub Cover18815-040-200 Base Assembly with CastersItem Part No.Part Name Qty.18815-042-800Lamp Base1 28801-790-000Caster3 38815-020-102Locking Caster2Counterweight AssemblyAssembly part number 8815-000-200Item Part No.Part Name Qty.Item Part No.Part Name Qty. 10059-154-000Fuse Block1148815-001-300Counterweight1 21502-080-002Red Hook-Up Wire35”158815-010-500Transformer1 38815-001-100Wire Anchor Clip1168815-002-200Pan Hd. Screw1 48815-007-000Phillips Hd. Screw2178815-004-800Resistor1 58815-005-500Int. Tooth Lock Washer3188800-500-300Ring Terminal3 68815-010-300Tab2198801-620-000Clip2 78815-009-600Terminal Strip1208815-004-500Exam Light Bulb1 80034-202-000Insulation Sleeve3”211502-001-003 1.25 Amp. Slo-Blo Fuse2 91502-080-003Red Hook-Up Wire35”238815-012-600Push Nut1 108815-012-700Phillips Hd. Screw4248815-012-500Hex Hd. Cap Screw1 118815-005-600Int. Tooth Lock Washer6258815-005-800Ext. Tooth Lock Washer1 128839-792-600Power Cord1278815-005-700Phillips Hd. Screw1 138815-001-400Strain Relief18815-040-400 Base Cover AssemblyItem Part No.Part Name Qty. 18815-040-600Counterweight Cover1 28815-000-800Light Serial No. Label1 38800-840-700Numerical Serial No. Label1 41502-001-004Caution Label1Head/Arm Post AssemblyAssembly part number 8815-040-300(reference only)Item Part No.Part Name Qty.1(page 23)Light Post Assembly128815-003-000Clear Button Bumper43(page 12) Head/Arm Assembly14(page 21)Switch Cover Assembly158800-840-600Adel Label168815-007-000Phillips Head Screw178815-005-500Star Lock Washer388800-500-300Ring Terminal198815-029-400Green Ground Tape1108815-002-600Male Connector2118815-025-600Cable Tie1128815-011-400Knob113(page 16)Handle Assembly2141502-001-005Burn Caution Label1Head/Arm AssemblyAssembly part numberSTEP 1STEP 2STEP 3 8815-040-800 (reference only)Item Part No.Part Name Qty.Item Part No.Part Name Qty. 1(page 17)Light Arm Assembly1138815-008-900Plastic Screw3 2(page 13)Focus Adj. Ring Ass’y1148815-004-000Thumb Screw Knob2 38815-014-000Phillips Hd. Screw3158815-041-800Handle Mtg. Bracket2 48815-018-400Phillips Hd. Screw1168815-005-500Int. Tooth Lock Washer8 58815-019-200Closed End Connector3178815-003-700Hex Hd. Cap Screw4 68815-041-400Outer Housing1188815-007-000Round Hd. Screw4 78815-016-800Stand Off6198815-028-000Lens Clip4 88815-041-500Vent Ring2208815-009-800Coated Mirror1 98815-014-400Round Threaded Spacer3218815-016-300Front Heat Shield1 108815-016-000Spacer3228815-004-500Bulb1 118815-041-600Cap Baffle123(page 15)Lens Assembly1 128815-042-500Focus Cover1248815-041-900Lens Mount Shroud1Focus Adjustment Ring AssemblyAssembly part number8815-041-300 (reference only)Item Part No.Part Name Qty.18815-042-200Plastic Ring128815-006-200Inner Housing138815-003-900Hex Nut348815-014-800Flat Washer458815-013-900Stud368815-007-000Round Hd. Screw278800-500-300Ring Terminal188815-005-500Lock Washer498815-009-500Spacer310(page 14)Light Focus Assembly1118815-009-400Thermal Shield1128815-013-000Ground Wire 5.83’138815-013-800Spacer3148815-029-400Ground Tape2”158815-019-900Pem Fastener38815-030-000 Focus Assembly Assembly part number 8815-032-700 (reference only)Item Part No.Part Name Qty.18815-002-000Set Screw Collar128808-319-600Belleville Spring138800-210-000Flange Bushing248815-003-700Hex Hd. Cap Screw358815-005-500Int. Tooth Lock Washer368815-019-400Bulb Mounting Plate178815-025-300Screw188815-014-200Hex Socket Screw198815-006-100Focusing Hub1108815-012-800Focus Adj. Screw Ass’y1118815-007-200Socket Mtg. Block1128815-016-800Spacer1138815-010-800Lamp Socket1148815-004-100Phillips Hd. Screw28815-028-100 Lens AssemblyAssembly part number 8815-032-600 (reference only)Item Part No.Part Name Qty.18815-002-200Pan Hd. Screw1 28815-028-600Lens1 38815-017-900Spacer1 48815-013-800Spacer1 58815-007-800Front Shield1 68815-014-000Round Hd. Screw18815-032-500 Handle AssemblyItem Part No.Part Name Qty.18815-016-900Snap Button Clip128815-011-300Light Handle1 Set of two handles = part number 8815-011-100Assembly part number 8815-041-200 (reference only)Item Part No.Part Name Qty.1(page 18)Yoke Assembly12(page 20)Hub Assembly138815-02-56-00Cable Tie148815-00-55-00Lock Washer158815-01-47-00Hex Jam Nut168815-01-78-00Soc. Hd. Screw178800-22-16-00Set Screw188815-00-67-00Counterbalance Cam198800-46-00-00Cable Clamp1Assembly part number8815-042-000 (reference only)Item Part No.Part Name Qty.18815-042-400Yoke Swing Arm12(page 19)Tension Spring Assembly138815-029-000Swing Arm Cable 4 Ft.48815-016-100Bearing Spacer158815-017-200Friction Spring168815-015-600Friction Block Pivot178815-007-900Head Pivot Block188815-013-500Rectangular Closure298815-017-800Button Hd. Screw1108815-031-300Nylon Plug1118815-018-400Phillips Hd. Screw18815-034-700 Tension Spring AssemblyItem Part No.Part Name Qty. 18815-007-400Spring Fastener1 28815-011-200Counterbalance Spring1 38815-007-300Spring Anchor1 48815-010-900Counterbalance Cable1 58815-019-200Closed End Connector1 68800-630-100Adhesive Tape3”Hub AssemblyAssembly part number 8815-042-100 (reference only)Item Part No.Part Name Qty.18815-013-700Cam Thrust Washer228815-042-300Hub238815-033-600Sleeve Stop148815-013-600Hub Thrust Washer158815-025-200Hub Pivot Pin168815-018-900Groove Pin1Switch Cover AssemblyAssembly part number 8815-040-900 (reference only)Item Part No.Part Name Qty.1(page 22)Rotary Switch Assembly1 28815-042-700Switch Hub Cover1 38815-011-400Focus Intensity Knob18815-029-600 Rotary Switch Assembly Assembly part number 8815-009-700 (reference only)Item Part No.Part Name Qty. 18815-005-1003-Position Rotary Switch1 28815-002-900Red Hook Up Wire3”38815-011-700White Hook Up Wire 1.5”48815-002-600Male Connector2 58815-002-700Female Connector1Post AssemblyAssembly part number 8815-040-700(reference only)Item Part No.Part Name Qty.18815-029-000Cable 5.528815-016-100Bearing Spacer138815-041-000Vertical Tube140500-030-049Cord Clip258801-730-000Pop Rivet468815-025-600Cable Tie178815-013-000Ground Wire 5.55’98800-500-300Ring Terminal2108815-002-700Insulated Female Terminal6Replacement Parts ListPART NAME PART NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bulb, 70 Watt, 28 Volt8815-035-800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Base with Casters8815-040-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Focus Stem Kit8815-030-000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fuse, 1 1/4 Amp, Slo-Blo8815-003-200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Knob, Focus/Off, Hi/Low 8815-011-400 Lens with Deflector8815-028-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Light Handles, Pair (with Spring)8815-011-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Light Socket8815-010-800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Light Socket Mount Block (Black)8815-007-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Coated Mirror8815-009-800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transformer Kit, 110V8815-028-800 Transformer Kit, 220V8815-030-100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switch Rotary Kit8815-029-600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Stop Sleeve Assembly (with Steel Sleeve)8815-034-200Limited Warranty:Stryker Medical Division, a division of Stryker Corporation, warrants to the original purchaser that its products should be free from defects in material and workmanship for a period of one (1) year after date of delivery. Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. Stryker warrants to the original purchaser that the frame and welds on its beds will be free from structural defects for as long as the original purchaser owns the bed. If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall void this warranty. Any repair of Stryker products using parts not provided or authorized by Stryker shall void this warranty. No employee or representative of Stryker is authorized to change this warranty in any way. Stryker Medical stretchers are designed for a 10 year expected life under normal use conditions and appropri-ate periodic maintenance as described in the maintenance manual for each device.This statement constitutes Stryker’s entire warranty with respect to the aforesaid equipment. STRYKER MAKES NO OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, EXCEPT AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL STRYKER BE LIABLE HEREUNDER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.To Obtain Parts and Service:Stryker products are supported by a nationwide network of dedicated Stryker Field Service Representatives. These representatives are factory trained, available locally, and carry a substantial spare parts inventory to minimize repair time. Simply call your local representative, or call Stryker Customer Service at (800) 327-0770.Service Contract Coverage:Stryker has developed a comprehensive program of service contract options designed to keep your equip-ment operating at peak performance at the same time it eliminates unexpected costs. We recommend that these programs be activated before the expiration of the new product warranty to eliminate the potential of additional equipment upgrade charges.A SERVICE CONTRACT HELPS TO:S Ensure equipment reliabilityS Stabilize maintenance budgetsS Diminish downtimeS Establish documentation for JCAHOS Increase product lifeS Enhance trade-in valueS Address risk management and safetyStryker offers the following service contract programs:* Replacement parts and labor for products under PM contract will be discounted.** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re-sulting from abuse.Stryker Medical also offers personalized service contracts.Pricing is determined by age, location, model and condition of product.For more information on our service contracts,please call your local representative or call (800) 327-0770 (option #2).Return Authorization:Merchandise cannot be returned without approval from the Stryker Customer Service Department. An autho-rization number will be provided which must be printed on the returned merchandise. Stryker reserves the right to charge shipping and restocking fees on returned items.SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN.Damaged Merchandise:ICC Regulations require that claims for damaged merchandise must be made with the carrier within fifteen (15) days of receipt of merchandise. DO NOT ACCEPT DAMAGED SHIPMENTS UNLESS SUCH DAMAGE IS NOTED ON THE DELIVERY RECEIPT AT THE TIME OF RECEIPT. Upon prompt notification, Stryker will file a freight claim with the appropriate carrier for damages incurred. Claim will be limited in amount to the actual replacement cost. In the event that this information is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for payment of the original invoice in full.Claims for any short shipment must be made within thirty (30) days of invoice.International Warranty Clause:This warranty reflects U.S. domestic policy. Warranty outside the U.S. may vary by country. Please contact your local Stryker Medical representative for additional information.DH 5/03 1502-90-2 REV AEuropean RepresentativeStryker FrancePhone:33148632290BP 50040-95946 Roissy Ch. de Gaulle Fax:33148632175Cedex-France6300 Sprinkle Road, Kalamazoo, MI 49001-9799 (800) 327-0770。

1-3-1 Maintenance modeThe machine is equipped with a maintenance function which can be used to maintain and service the machine.(1) Executing a maintenance item(2) Maintenance mode item list(3) Contents of maintenance mode itemsøï÷Ú·®³©¿®» ª»®-·±² îØéÁîðððòðððòðððîððçòïðòîéÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃøè÷øç÷(12 8) 27: 8Køï÷Ú·®³©¿®» ª»®-·±² îØéÁîðððòðððòðððîððçòïðòîéÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃÚ·®³©¿®» ª»®-·±² îØéÁîðððòðððòðððîððçòïðòîéÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃÅÈÈÈÈÈÈÈÈÃU000Detail of service status pageNo.Description Supplement(1)System version(2)System date(3)Engine soft version(4)Engine boot version(5)Operation panel mask version(6)Total RAM size(7)Local time zone(8)Report output date Day/Month/Year hour:minute(9)NTP server nameInstalled/Not Installed(10)Presence or absence of the optionalDP(11)Presence or absence of the optionalCassette/LCF/Not Installedpaper feeder3000-Finisher/1000-Finisher/Not Installed(12)Presence or absence of the optionaldocument finisherInstalled/Not Installed(13)Presence or absence of the optionalmailboxInstalled/Not Installed(14)Presence or absence of the optionaljob separator(15)Presence or absence of the optionalInstalled/Not Installedprinted document guard kitInstalled/Not Installed(16)Presence or absence of the optionalinternet fax kit(17)Presence or absence of the optionalInstalled/Not Installeddata security kit(18)Data security kit identification name(19)Page of relation to the A4/Letter(20)Average coverage for total Black/Cyan/Magenta/Yellow(21)Average coverage for copy Black/Cyan/Magenta/Yellow(22)Average coverage for printer Black/Cyan/Magenta/Yellow(23)Average coverage for fax Black/Cyan/Magenta/Yellow(24)Cleared date and output date(25)Coverage on the final output page(26)Fax kit information This item is printed only when the fax kit is installed.(27)Number of rings0 to 15(28)Number of rings before automatic 0 to 150 to 15(29)Number of rings before connecting toanswering machine(30)Optional DIMM size(31)FRPO setting(32)Machine serial numberU000No.Description Supplement(33)NV RAM version _ Bb 04B29 _ Bb 04B29(a) (b) (c) (d) (e) (f)(a) Consistency of the present software version and thedatabase_ (underscore): OK* (Asterisk): NG(b) Database version(c) The oldest time stamp of database version(d) Consistency of the present software version and theME firmware version_ (underscore): OK* (Asterisk): NG(e) ME firmware version(f) The oldest time stamp of the ME database versionNormal if (a) and (d) are underscored, and (b) and (e)are identical with (c) and (f).(34)Scanner firmware version(35)Fax firmware version This item is printed only when the fax kit is installed.(36)Mac address(37)The last sent date and time(38)Transmission address(39)Destination information/Area informa-tion(40)Margin settings T op margin/Left margin(41)Margin/Page length/Page widthsettings T op margin integer part/T op margin decimal part/ Left margin integer part/Left margin decimal part/ Page length integer part/Page length decimal part/ Page width integer part/Page width decimal part(42)Life counter (The first line)Machine life counter/MP tray life counter/Cassette 1 counter/Cassette 2 counter/Cassette 3 counter/Cassette 4 counter/Duplex counter Life counter (The second line)Drum unit K counter/Drum unit C counter/Drum unit M counter/Drum unit Y counter/Transfer belt unit counter/Developing unit K counter/Developing unit C counter/Developing unit M counter/Developing unit Y counter/Maintenance kit A counter/Maintenance kit B counter(43)Panel lock information0: OFF/1: Partial lock/2: Full lock(44)USB information0: Not installed/1: Full speed/2: Hi speed(45)Paper handling information0: Paper source unit select/1: Paper source unit(46)Color printing double count mode0: All single counts1: A3, Single count, Less than 420 mm (length)2: Legal, Single count, 356 mm or less (length)3: Folio, Single count, Less than 330 mm (length)(47)Black and white printing double countmode 0: All single counts1: A3, Single count, Less than 420 mm (length) 2: Legal, Single count, 356 mm or less (length) 3: Folio, Single count, Less than 330 mm (length)U000CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.No.DescriptionSupplement(48)Billing counting timing (49)Temperature (machine inside)(50)Temperature (machine outside)(51)Relative temperature (machine out-side)(52)Absolute temperature (machineout-side)(53)Fixed assets number(54)Job end judgment time-out time (55)Job end detection mode (56)Media type attributes1 to 28 (Not used: 18, 19, 20)Weight settings0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra Heavy Fuser settings0: High / 1: Middle / 2: Low / 3: Vellum Duplex settings0: Disable / 1: Enable(57)Calibration information (58)Calibration information (59)Calibration information (60)Calibration information (61)Calibration information (62)Calibration information (63)Calibration information (64)Calibration information (65)Calibration information (66)Calibration information (67)RFID information(68)RFID reader/writer version information (69)Color table version (70)Color table 2 version (71)Maintenance information (72)Drum serial numberBlack/Cyan/Magenta/Yellow。

TW-2型驼峰自动化系统维护手册北京全路通信信号研究设计院第1 页共56 页TW-2型驼峰自动化系统维护手册北京全路通信信号研究设计院目录1.综述 (4)2.系统组成与结构 (5)2.1现场设备 (5)2.1.1道岔转辙设备 (5)2.1.2轨道电路 (5)2.1.3色灯信号机 (5)2.1.4车辆减速器 (5)2.1.5雷达 (5)2.1.6轮轴探测器(踏板) (5)2.1.7测长轨道电路 (5)2.1.8测重 (6)2.2驼峰控制台室内设备 (6)2.2.1调车区长站 (6)2.2.2调车长站 (6)2.2.3调速站 (6)2.2.4手动控制台（盘） (7)2.3机房及机械室设备 (7)2.3.1控制机柜 (7)2.3.2维护站 (7)2.3.3报警打印机 (8)2.3.4交流净化电源或25周变频电源 (8)2.3.5UPS不间断电源 (8)2.3.6接口继电器组合柜(架) (8)2.3.7分线柜(盘) (8)2.4系统电源连接及通道连接示意图（典型情况） (9)3.维修人员需掌握的内容 (12)4.信息窗的使用 (13)4.1信息窗的显示 (13)4.2信息窗的操作 (13)4.2.1上层操作命令 (14)4.2.2上层调试命令 (14)4.2.3报警与记录信息检索 (15)4.2.4勾车统计报告 (15)4.2.5仿真终端 (15)4.2.6系统状态监测 (15)4.2.7道岔转动次数统计 (16)4.2.8调制解调器操作 (16)4.2.9维护信息 (17)4.2.10退出 (17)4.3报警与记录信息检索窗的使用 (17)4.3.1树型窗 (17)4.3.2选择窗： (17)4.3.3参数设置窗： (18)4.3.4报警信息窗 (18)4.4报警信息窗中的菜单操作 (19)4.4.1新的查询 (19)4.4.2退出查询 (19)4.4.3打印结果 (20)4.4.4信息保存 (20)第2 页共56 页TW-2型驼峰自动化系统维护手册北京全路通信信号研究设计院4.4.5概要记录统计 (20)4.4.6查询暂停与查询继续 (20)4.4.7剔除该项与恢复剔除 (20)4.5报警与记录的检索分类及说明 (20)4.6统计报告窗操作说明 (32)4.6.1调车作业计划表： (33)4.6.2计划执行概要表： (33)4.6.3计划速度控制表 (34)4.6.4车站运营状态表 (35)4.6.5勾车详细信息 (40)4.6.6减速器控制误差统计 (41)5.上层机维护诊断命令 (43)6.下层模块的维护诊断操作 (44)6.1各微机板监控命令 (44)6.2ZB、LB板 (44)6.3CB板 (44)6.4JB板 (46)7.常见问题的分析 (49)7.1怀疑某开关量输入不正确 (49)7.2怀疑某静态输出没有 (49)7.3怀疑某动态输出没有 (49)7.4减速器出口速度偏高 (49)7.5减速器出口速度偏低 (50)7.6勾车错道 (50)7.7溜放中有不正确的报警 (50)7.8测长不准确 (51)7.9计轴不准确 (51)7.10双机不同步 (51)7.11全场输入均不正确 (51)7.12全场雷达均报故障 (51)7.13全场测长均为零，或均报故障 (51)8.有关执表的内容 (52)8.1测长轨道电路 (52)8.2交流净化电源 (52)8.3双机同步 (52)8.4主备机轮换使用 (52)8.5工作站、键盘、鼠标的清理 (52)8.6通过查询统计检查室外设备状态 (52)8.7UPS电源检查 (52)8.8无源踏板检查 (53)8.9测重检查 (53)8.10通道电源检查 (53)8.11机柜内部检查 (53)8.12接地电阻检查 (53)9.维护注意事项 (54)第3 页共56 页TW-2型驼峰自动化系统维护手册北京全路通信信号研究设计院1.综述TW-2系列组态式驼峰自动控制系统是在我单位已有的各个子系统(包括：TWJ-2溜放进路控制、TWZ-1自动集中、TWK-1溜放速度控制、TWGC-1工频测长)基础之上，统一构造，统一管理，统一操作，统一监控，其控制模块（包括硬、软件）可按需配置和组合，适合大中小不同站场规模，适合于不同功能选择与取舍的场合。

汽车二级维护contents •二级维护概述•发动机系统维护•底盘系统维护•电气系统维护•空调系统维护•车身及附件维护目录二级维护概述01定义与目的定义汽车二级维护是由维修企业负责执行的车辆维护作业，其作业中心内容除一级维护作业外，以检查、调整转向节、转向摇臂、制动蹄片、悬架等经过一定时间的使用容易磨损或变形的安全部件为主，并拆检轮胎，进行轮胎换位。

目的二级维护的目的是维护车辆各零部件、机构和总成具有良好的工作性能，确保其在两次二级维护之间的正常运行。

维护周期及标准维护周期二级维护的周期通常根据车辆类型、使用条件和强度等因素确定。

一般而言，营运车辆的二级维护周期为每行驶一定里程（如2万-3万公里）或根据时间间隔（如每季度或半年）进行一次。

维护标准二级维护作业项目包括基本作业项目和附加作业项目，基本作业项目是根据维护周期和车辆实际情况确定的必须进行的维护作业，附加作业项目是根据车辆使用条件和技术状况选择性进行的维护作业。

重要性及意义重要性二级维护是保障汽车安全运行的重要措施之一。

通过二级维护，可以及时发现和排除车辆存在的安全隐患，保证车辆具有良好的动力性、经济性、制动性、操纵稳定性等性能。

意义二级维护不仅关系到车辆的技术状况和使用寿命，还关系到行车安全和环境保护。

因此，车主和驾驶员应重视并定期进行二级维护，以确保车辆的安全、经济、环保运行。

发动机系统维护02检查机油液面高度检查机油质量更换机油更换机油滤清器检查与更换机油01020304确保机油液面在机油尺的上下刻度之间。

观察机油颜色、粘度等，判断是否需要更换。

按照厂家推荐的机油型号和更换周期进行更换。

更换机油时，应同时更换机油滤清器。

拆下空气滤清器，检查其是否脏污、破损。

检查空气滤清器清洗空气滤清器更换空气滤清器如果空气滤清器不太脏，可以用压缩空气从内向外吹干净。

如果空气滤清器严重脏污或破损，应及时更换。

030201清洗或更换空气滤清器检查与调整点火系统检查点火线圈和火花塞检查点火线圈和火花塞是否有裂纹、积碳等。

一、二级单位内控手册维护操作手册内控管理信息项目组目录1流程描述 (3)2流程分配 (3)3二级单位替换操作 (5)3.1在线替换 (6)3.2导入导出批量替换 (11)4替换检查 (13)5手册发布 (15)6一级单位控制点测试配置 (18)方法一：在线更改 (20)方法二：批量更改 (21)7二级单位控制点测试配置 (22)1流程描述功能描述：企业在维护二级单位内控实施细则的主要责任部门（主控部门）、参与部门、岗位、人员时，为了方便表达，会描述统一的名称，如“二级单位”、“地市分公司”，而这些部门、岗位、人员并没有落实到具体的单位、部门、岗位、人员。

信息系统的建设需要指定明确的部门、岗位、人员，系统提供对“二级单位、岗位、人员”进行替换的功能。

2流程分配操作角色：一级单位内控管理员操作步骤：1)点击【模板管理】-【二级单位对应流程设置】，显示全部二级单位列表。

2)点击“海洋采油厂”，在右侧窗口中选择该二级单位参与的流程，设置完成后，点击【保存】保存结果，如下图：3)检查【内控手册】-【手册编辑】-【业务层面控制】矩阵，如1.2流程下的1.1控制点，如果此控制点适用于二级单位，需要编辑此控制点，在【责任部门/单位】点选择按钮，在部门列表中勾选“二级单位”，确定后1.1控制点的责任部门成功增加待替换部门“二级单位”，如下图：3二级单位替换操作操作角色：二级单位内控管理员操作步骤：以“海洋采油厂”的内控管理员登录，打开【内控手册】-【手册编辑】-【业务层面控制】菜单，对适用于本单位所有的控制点进行部门、岗位和人员替换。

二级单位替换支持两种方式：在线编辑替换和导入导出批量替换。

方法一：在线替换1）二级单位内控管理员打开业务矩阵，只能在线编辑替换适用于二级单位的控制点，对于不适用二级单位的控制点，二级单位内控管理员无权编辑。

如1.2流程的1.1控制点，内控管理员有编辑按钮，可以针对此控制点进行部门岗位人员替换，点击【编辑】，弹出如下对话框，2）在【责任部门/单位】列点击选择按钮，弹出部门选择列表，勾选“财务资产管理中心”和“规划计划科”两个部门，选择的结果将显示在窗口下方，如下图：3）【确定】，完成二级单位“责任部门”的替换，如下图：4）在【控制点岗位】列点击选择按钮，弹出所选择的部门下的所有岗位列表，勾选财务资产管理中心的科员岗位和规划计划科的投资计划管理岗两个岗位，选择的结果将显示在窗口下方，如下图：5）点击【确定】，完成二级单位“控制点岗位”的替换，如下图：6）在【控制点执行人（测试人）】列点击选择按钮，弹出所选择的部门岗位下的所有人员列表，勾选财务资产管理中心的科员岗位和规划计划科的投资计划管理岗两个岗位对应的人员，选择的结果将显示在窗口下方，如下图：7）点击【确定】，完成二级单位“控制点执行人（测试人）”的替换，如下图：8）在【内控测试复核人】列点击选择按钮，弹出所选择的控制点责任部门下的所有人员列表，勾选财务资产管理中心和规划计划科两个部门对应的复核人员，复核人支持多选，即一个部门下可以选择多个复核人。

XXXXXXX(建设单位) XXXXXXXXXXXXXXXXX项目名称系统维护手册XXX公司二〇XX年X月文档修改记录目录第一章引言 (5)1.1编写目的 (5)1.2文档范围 (5)1.3项目概要 (5)1.4术语和缩写 (5)1.5参考资料 (5)第二章系统说明 (7)2.1系统用途 (7)2.2程序（功能）说明 (7)2.3安全保密 (7)第三章系统运行环境 (8)3.1系统架构 (8)3.2系统硬件和网络环境 (8)3.3系统运行平台 (8)3.4系统界面描述 (8)3.5接口 (8)第四章程序1的说明 (9)4.1程序1的描述 (9)4.2程序1的方法 (9)4.2.1输入 (9)4.2.2输出 (9)4.2.3表格 (9)4.2.4数据库特性 (9)4.2.5对非功能的需求 (10)4.2.6系统参数及系统精度 (10)4.2.7灵活性 (10)4.2.8时间管理特性 (10)4.2.9输入输出要求 (10)4.3故障处理要求 (11)4.4其他非功能需求 (11)第五章程序2的说明 (12)第一章引言1.1编写目的提示：说明编写这份系统维护手册的目的。

本文档尽量以自然语言来描述，以期用户和潜在读者能够快速理解，并方便与用户进行沟通。

1.2文档范围提示：需要描述清楚文档传播范围和读者对象。

1.3项目概要提示：描述系统相关信息。

a．待开发系统(或软件)的名称；b．本项目的任务提出者、开发者、用户及实现该系统的部门或单位；c．该项目系统同其他系统或其他机构的基本的相互来往关系。

1.4术语和缩写提示：列出本文件中用到的专门术语的定义和外文首字母组词的原词组。

1.5参考资料提示：列出用得着的参考资料，如：a．本项目的经核准的计划任务书或合同、上级机关的批文；b．属于本项目的其他已发表的文件；c．本文件中各处引用的文件、资料、包括所要用到的系统开发标准。

列出这些文件资料的标题、文件编号、发表日期和出版单位，说明能够得到这些文件资料的来源。

个贷系统5.2二级维护手册一、历史数据查询1.总行端接口机操作2.由于个贷系统是分行集中，故在总行只有接口机上分发好的核心返回文件，可以通过ftp的方式登陆到10.1.62.55，用户名密码为gedai:gedai，然后通过分行机构代码进入各分行目录进行查看。

3.分行端4.在个贷后台服务器上/usr/pcs目录下：5.backupdb目录为备份数据库目录，可通过在备机上恢复历史数据库来查看历史数据。

6.backuplog目录为备份日志目录。

7.batchbak目录为备份核心返回文件目录，内为分发好的该分行的历史核心返回八个文件。

二、全行程序更新组织1.根据更新要求和涉及的范围不同区别对待。

2.对于涉及数据库表结构更新的，则需要进行数据库备份，并进行数据库升级，再进行前后台执行程序的升级。

3.对于未涉及数据库表结构更新的，如后台服务程序及windows前端的执行程序更新，则备份原来的程序，然后用新程序覆盖原有程序。

4.具体的更新操作步骤将会根据更新范围和要求进行实际制订。

三、主机房内系统程序更新无四、新增加分支行时原有系统的配置1．新增分支行总行接口机操作2．根据总行会计部的新开机构参数表，编辑新增机构的gdjg.csv文件（用Excel），格式：所属分行号,营业机构号,机构名称。

例如：3．95 9517 乔司支行将gdjg.csv文件置于本地C盘根目录下使用MS-SQL Server的企业管理器连接接口机的数据库gedai，数据库地址为10.1.62.54，用户名密码均为pcs找到数据转换服务目录下的本地包，执行DTS：pcs_sysbranchbank执行成功后，打开数据库目录下gedai目录下的表，找到sys_branch_bank，右键点击并选择打开表->返回所有行，查看新增机构参数是否已导入本操作必须在新增机构开业前完成！4．新增支行分行端操作（由分行人员操作）5．见附录一：《后台主机管理程序5.2操作手册》五、数据维护1．由于个贷系统是分行集中，所以总行端只有接口机上的数据需要维护，维护工作：在接口机管理员的指导下进行定时清理部分历史数据。

文档编号：内部资料注意保密系统维护手册编制规范XX 公司XX 部门文档信息版本号起草 /修改人审核人批准人日期变更内容Ver 0.1关于版本号的说明：1. 初稿版本号由0.1 开始，每审核一次，版本号在递加0.1 ，未正式发布的文档版本号<1 ；2.首次发布的文档版本号为 1.0 ；3.文档发布后，对文档进行的微小调整，在原版本号的基础上依次递加 0.1 ，并在上表中说明变更内容；4.每次发布对文档的重大调整，在 1.0 版本的基础依次以 1 为单位进行递加，重大调整应重新发布。

前言维护手册编制说明：一、维护手册编制目的：结合部门 09 年度服务支撑工作的要求--形成各系统的维护手册，使维护人员更加清晰的了解系统维护支撑工作的整体架构，掌握系统维护的基本操作方法及突发事件的应对策略，深入了解各项配置信息及参数，为系统及网络的稳定运行打下坚实的基础，特制定本规范。

二、维护手册的主要内容维护手册共分三个分册：（一）维护基础信息分册1.系统的基本信息，包括系统实现的业务功能，系统基本构成及环境描述；2.维护支撑工作的内容及要求，包括管理部门的考核指标；3.系统的维护支撑体系。

（二）维护操作手册（分册）维护操作手册的内容应确保对操作人员具有指导性，维护操作手册的内容包括以下几个方面：1.值班监控手册2.日常维护手册3.应急处置手册其中：日常维护手册应依据系统的维护角色定制，可以包括主机及操作系统分册，数据库及中间件分册，应用软件分册，业务手册等，各手册的内容应包括日常检查，备份及安全管理等内容。

应急处置手册可结合系统应急预案制定，确保维护人员对故障的迅速定位及排除。

（三）技术支撑文档（分册）详细说明系统的配置信息，配置参数，并详细的列出相关技术支撑文档信息，以便维护人员进行相关技术数据的查询。

三、维护手册的编制要求（一）以系统为单位进行编写；（二）可根据手册应用的迫切性，有重点，分阶段的完成。

目录系统基本信息分册 .............................................................................................................................................- 1 -1系统概述 .....................................................................................................................................................- 1 -1.1系统基本信息 ......................................................................................................................................- 1 -1.2业务功能描述 ......................................................................................................................................- 1 -1.3系统构成及环境 ..................................................................................................................................- 1 -2维护支撑工作范围 .....................................................................................................................................- 2 -2.1系统平台运行支持与保障..................................................................................................................- 2 -2.2应用系统支持与保障..........................................................................................................................- 3 -2.3业务运营支持服务 * ............................................................................................................................- 3 -3系统维护支撑组织架构 .............................................................................................................................- 3 -3.1运维管理 /服务支撑组织体系： .........................................................................................................- 3 -3.2职责与分工界面 ..................................................................................................................................- 4 -3.3干系人表 ..............................................................................................................................................- 4 -3.4集中系统省级支撑架构* ....................................................................................................................- 5 -4系统维护指标： .........................................................................................................................................- 6 -4.1维护指标 ..............................................................................................................................................- 6 -4.2运行指标 ..............................................................................................................................................- 6 -维护操作手册 .....................................................................................................................................................- 1 -1系统监控手册 .............................................................................................................................................- 1 -2系统维护手册 .............................................................................................................................................- 1 -2.1系统巡检要求 ......................................................................................................................................- 1 -2.2系统备份管理 ......................................................................................................................................- 1 -2.3安全管理 ..............................................................................................................................................- 2 -3应急处置 .....................................................................................................................................................- 2 -3.1故障级别定义 ......................................................................................................................................- 2 -3.2应急处置流程 ......................................................................................................................................- 2 -3.3常见问题及故障的处理......................................................................................................................- 3 -主机及操作系统类 .....................................................................................................................................- 3 -数据库类 .....................................................................................................................................................- 3 -应用类 .........................................................................................................................................................- 3 -网络类 .........................................................................................................................................................- 3 -关联系统类 * ...............................................................................................................................................- 4 -4系统操作指导 .............................................................................................................................................- 4 -4.1启停步骤及流程 ..................................................................................................................................- 4 -4.2系统常用仪器仪表使用说明..............................................................................................................- 4 -4.3系统安装及配置流程* ........................................................................................................................- 5 -技术支撑文档 .....................................................................................................................................................- 1 -1物理拓扑图 .................................................................................................................................................- 1 -1.1网络环境描述： ..................................................................................................................................- 1 -1.2内部连接信息 ......................................................................................................................................- 1 -2系统连接图 .................................................................................................................................................- 2 -3机房布局图 .................................................................................................................................................- 2 -4配线及线缆 .................................................................................................................................................- 2 -5设备配电信息 .............................................................................................................................................- 2 -6业务功能说明 .............................................................................................................................................- 3 -7系统设备说明 .............................................................................................................................................- 3 -7.1业务引擎区 ..........................................................................................................................................- 3 -7.2平台用户访问区 ..................................................................................................................................- 4 -7.3平台数据区 ..........................................................................................................................................- 5 -7.4平台应用区 ..........................................................................................................................................- 6 -8系统软件及补丁说明 .................................................................................................................................- 6 -8.1操作系统 ..............................................................................................................................................- 6 -8.2数据库及中间件 ..................................................................................................................................- 6 -8.3应用软件 ..............................................................................................................................................- 7 -8.4业务应用系统 ........................................................................................................错误！未定义书签。

标准维护指导书范本概述本文档旨在提供一份标准维护指导书的范本，以帮助组织编写和维护自己的维护指导书。

维护指导书是组织中维护人员的参考手册，涵盖了设备、软件或服务的维护相关信息，以确保维护工作的高效和一致性。

编写维护指导书的步骤1. 确定目标受众: 确定维护指导书的受众群体，例如维护人员、技术支持团队或用户。

确定目标受众: 确定维护指导书的受众群体，例如维护人员、技术支持团队或用户。

2. 收集相关信息: 收集与维护对象相关的信息，包括设备规格、软件配置、故障排除步骤等。

确保收集到的信息准确可靠。

收集相关信息: 收集与维护对象相关的信息，包括设备规格、软件配置、故障排除步骤等。

确保收集到的信息准确可靠。

3. 制定章节结构: 根据维护指导书的功能和内容，制定章节结构，例如设备介绍、维护流程、故障排除等。

制定章节结构: 根据维护指导书的功能和内容，制定章节结构，例如设备介绍、维护流程、故障排除等。

4. 编写内容: 根据章节结构，依次编写每个章节的内容。

使用简洁明了的语言，确保指导书易于理解和操作。

编写内容: 根据章节结构，依次编写每个章节的内容。

使用简洁明了的语言，确保指导书易于理解和操作。

5. 进行内部审查: 将编写好的指导书进行内部审查，确保其准确性和完整性。

修订和修改必要的内容。

进行内部审查: 将编写好的指导书进行内部审查，确保其准确性和完整性。

修订和修改必要的内容。

6. 格式化和排版: 对维护指导书进行格式化和排版，确保整齐清晰的布局。

使用合适的字体、标题和图表元素提高可读性。

格式化和排版: 对维护指导书进行格式化和排版，确保整齐清晰的布局。

使用合适的字体、标题和图表元素提高可读性。

7. 发布和更新: 发布维护指导书，并定期进行更新以反映任何变更和改进。

发布和更新: 发布维护指导书，并定期进行更新以反映任何变更和改进。

维护指导书的最佳实践以下是一些编写维护指导书时的最佳实践：- 使用简明扼要的语言，避免使用过于专业或复杂的术语。