“升”声动人——美国西海岸宝马汽车音响升级套件实车试听

“迷人小钢炮”宝马118音响改装升级曼斯特CS4008 还原最靓声
音【重庆道声汽车音响改装】
随着国内生活水平的提高，越来越多的人开始追求高品质的生活，音乐就是他们所追求的目标之一。

甚至，对于越来越多的年轻人来说，完全可以用一首现代摇滚乐的歌名来概括他们的心境——只有音乐才是我的解药。

而在汽车
音响行业，更是从来不缺乏真正对音乐充满热忱的发烧友。

接下来看看迷人小钢炮的升级之作。

升级器材：德国曼斯特CS4008
再来一张原车喇叭图
曼斯特CS4008
产品参数：
实际功率：30W
最大功率：100W
频率响应：53--28000HZ
阻抗：4Ω
灵敏度：87dB
分频点：4500HZ
曼斯特CS4008中音无损安装
曼斯特CS4008高音，打孔安装在原三角板,更好的定位声场
高音安装复位在三角板。

曼斯特CS4008高品质的使用性能，最真实的现场表现力，声音自然、甜美，优秀的声压表现，应对极端嘈杂环境；
高音精准，180度的角度听音声压平坦，接近理想标准。

全国不知道有多少宝马车友在听着这套喇叭……。

SOUNDBOOST SPEAKERAttach your Moto Mods™Align the camera lens on the back of your phone with the speaker, and then align the sides and bottom of the phone with the speaker until they snap together.Note: Make sure the connectors are clean and dry. Also, remove your phone case if you use one.Caution: Before using your device, please read the safety, regulatory, and legal information at the back of this guide.Compatibility Requirements:Moto Z Phone with Moto Mods Platform 1.0or laterQuick setupWhen you attach the speaker, your phone automatically guides you through setup. Follow the on-screen instructions to get started.Play mediaOnce your speaker is attached, begin using your phone as usual to play music or watch videos. Media will automatically play through the JBL SoundBoost speaker when attached to the phone. Adjust volumeTo change the volume for your speaker, use your phone’s volume controls.Charge itFully charge before using your speaker.Tip: If your phone is still attached to the speaker,charging the phone is the best way to charge both at the same time.Charging status lights Charging port Charge levelbutton slow blinking green ChargingFull chargePartially charged:51-99%16-50%6-15%Very low power steady green, then off steady amber, then off steady red, then off rapid blinking redrapid blinking green, or steady green when chargingTips & TricksLooking for more?•Camera: You can still use your phone’s camera when the speaker is attached.•Connection vibration: When you successfully attach your Moto Mod to your phone, you feela slight vibration.IMPORTANT SAFETY INSTRUCTIONSFor all products:1.Read these instructions.2.Heed all warnings.3.Follow all instructions.4.Do not install this apparatus near any heatsources such as radiators, heat registers, stoves or other apparatus (including amplifiers) thatproduce heat.e only attachments/accessories specified bythe manufacturer.6.Do not expose batteries to excessive heat suchas sunshine, fire or the like.CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONL Y)This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2)this device must accept any interference received,including interference that may cause undesired operation.CAN ICES-3(B)/NMB-3(B)Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communica-tions. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by HARMAN could void the user’s authority to operate the equipment.WEEE NoticeThe Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on14February 2014, resulted in a major change in the treatment of electrical equipment at end-of-life.The purpose of this Directive is,as a first priority,the prevention of WEEE, and in addition, to promote the reuse,recycling and other forms of recovery of such wastes so as to reduce disposal. The WEEE logo on the product or on its box indicating collection for electrical and electronic equipment consists of the crossed-out wheeled bin, as shown below.This product must not be disposed of ordumped with your other household waste.You are liable to dispose of all yourelectronic or electrical waste equipment byrelocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.Moreover,proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.RoHS ComplianceThis product is in compliance with Directive2011/65/EU of the European Parliament and of the Council of 8 June2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.For Products That Include BatteriesEU Batteries Directive 2013/56/EUA new battery directive 2013/56/EU on Battery and Accumulator replacing directive entered into force on the 1 July 2015.The directive applies to all types of batteries and accumulators(AA, AAA, button cells, lead acid, rechargeable packs) including those incorporated into appliances except for military, medical and power tool applications.The directive sets out rules for collection,treatment, recycling and disposal of batteries, and aims to prohibit certain hazardous substances and to improve environmental performance of batteries and all operators in the supply chain.Instructions for Users on Removal,Recycling and Disposal of Used BatteriesT o remove the batteries from your equipment or remote control,reverse the procedure described in the owner’s manual for inserting batteries.For products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for the user.In this case,recycling or recovery centers handle the dismantling of the product and the removal of the battery.If,for any reason,it becomes necessary to replace such a battery, this procedure must be performed by authorized service centers.In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner.Contact your local waste-management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries. WARNING:Danger of explosion if battery is incorrectly replaced.T o reduce risk of fire or burns, don’t disassemble,crush,puncture, short external contacts,expose to temperature above60°C (140°F), or dispose of in fire or water.Replace only with specified batteries.The symbol indicating‘separate collection’for all batteries and accumula-tors shall be the crossed-out wheeled bin shown below:In case of batteries,accumulators and button cells containing more than0.0005 % mercury,more than 0.002 % cadmium or more than0.004 % lead, shall be marked with the chemical symbol for the metal concerned: Hg, Cd or Pb respectively. Please Refer to the below symbol:For All Products Except Those with Wireless Operation:HARMAN International hereby declares that this equipment is in compliance with the EMC2014/30/EU Directive,LVD2014/35/EU Directive and RoHS 2011/65/EU Directive.The declaration of conformity may be consulted in the support section of our Web site,accessible from.SET UP INFORMATION & PRODUCT REGISTRA-TIONCongratulations with the purchase of your new Product. We have done our utmost to make your experience the best one possible.If you have any questions when setting up your Product and would like some helpful hints, we recommend that you visit the relevant country specific support website for your Product: . There you will also find relevant contact information. If you cannot find the information you are looking for,please contact the vendor that sold the Product to you or contact the relevant JBL customer support center by electronic mail or phone.We recommend that you register your Product via the relevant country specific website for your Product. Your registration will allow us to inform you about updates for certain products, possible new offers and new Products and/or applications. Registering is easy;just follow the instructions on the relevant country specific website for your Product.NOTE: THIS LIMITED WARRANTY DOES NOT APPL Y TO CONSUMERS IN THE EUROPEAN ECONOMIC AREA (EEA) MEMBER STATES AND THE RUSSIAN FEDERATION AS THEY ARE PROTECTED BY LOCAL CONSUMER LAW AND BENEFIT FROM LOCAL STATUTORY WARRANTIESLIMITED WARRANTYWHO IS PROTECTED BY THE WARRANTYThis limited warranty (the “Limited Warranty”) protects only the original end-user (“you” or“your”), and is not transferable and is applicable only in the country (excluding EEA member states and the Russian Federation) in which you originally purchased your JBL Product (the “Product”). Any attempt to transfer this warranty shall immediately make this warranty void.LIMITED WARRANTYHARMAN International Industries, Incorporated (“HARMAN”) is the manufacturer and through its local subsidiary,warrants to you that the Product (including components provided in/with the Product) will be free from defects in workmanship and materials for a period of ONE year from the date of retail purchase by you(the“Warranty Period”). During the Warranty Period, the Product (including components),will be repaired or replaced at HARMAN’s option, without charge for either parts or labor OR at HARMAN’s sole option, the price of the Product may be refunded, subject todepreciation based on your purchase price for the Product pro-rated over the remaining balance of the Warranty Period.Any warranty service or replacement of parts will not extend the Warranty Period.This Limited Warranty does not cover defects which are a result of: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance);(2) damage during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface;(4)damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs by someone other than an authorized JBL service center;(6)deterioration of component parts, the nature of which is to become worn or depleted with use,such as batteries and headphone ear pads. Furthermore, this Limited Warranty covers only actual defects within the Product itself, and doesnot cover the cost of installation or removal from a fixed installation, setup or adjustments, claims based on misrepresentation by the seller, performance variations resulting from installa-tion-related circumstances such as source quality or AC power or Product modifications, any unit on which the serial number has been effaced, modified or removed, or units used for other than home use. This Limited Warranty is valid only for JBL products purchased from an authorized dealer.Except to the extent expressly prohibited in your jurisdiction by applicable law,all implied warranties, including fitness for a particular purpose and merchantability are hereby excluded and in no event shall HARMAN or any HARMAN subsidiary be liable for any indirect, direct, incidental, special or consequential loss or damages whatsoever(including, without limitation, other pecuniary loss) arising out of the use of or inability to use the Product, even if HARMAN and/or a HARMAN subsidiary have been advised of the possibility of such damages. T o any extent that HARMAN cannot lawfully disclaim implied warranties under this Limited Warranty, all such implied warranties are limited in duration to the duration of this warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by jurisdiction.HOW TO OBTAIN WARRANTY SERVICEContact the dealer who sold you this Product, or contact JBL customer support using the contact information on the relevant country specific support website for your Product to request warranty service.T o validate your right to this Limited Warranty,you must provide the original sales invoice or other proof of ownership and date of purchase.Do not return your Product without prior authorization from the corresponding dealer or HARMAN. Warranty repair of the HARMAN Product must be carried out by an authorized dealer or service center. Unauthorized warranty repair will void the warranty and is performed at your sole risk. You are also welcome to consult the relevant country specific HARMAN support website for your Product for helpful hints.WHO PAYS FOR WHATThis Limited Warranty covers all expenses for labor and materials required for the repair OR replace-ment of the Product that is found to be defective, and a reasonable return shipping charge within the country of repair. Please be sure to save the original shipping carton(s), because a charge will be madefor additional cartons/packaging.You will be charged for the cost of examining a unit that is not in need of repair (including resulting shipping costs), or for necessary repairs not covered by this Limited Warranty.We sincerely thank you for your expression of confidence in JBL.We wish you many years of listening pleasure.Open source information:This Moto Mod accessory is intended to be interfaced with a Motorola mobile device and may include Open Source Software (the “Software”) copyrighted and distributed under an MITlicense and BSD-style licenses, including a modified BSD license, a BSD-like license and acompatible BSD license.The Software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICU-LAR PURPOSE.T o view the text of the licenses, acknowledgments, required copyright notices and fulldisclaimer provisions for the Software used on this Moto Mod, please go to APPS > Settings >Moto Mods > Legal Information > Open source licenses on the Motorola mobile device after itis connected to this Moto Mod.Manufactured, distributed and sold by Harman International a Moto Mod™ licensee, who has certified that this product meets the applicable Moto Mod performance standards. Motorola Mobility LLC and Motorola Trademark HoldingsLLC are not responsible for the operation of this product or its compliance with safety and regulatory standards.MOTOROLA, the Stylized M Logo, MOTO and the MOTO family of marks are trademarks of Motorola Trademark Holdings, LLC.All other trademarks are the property of their respective owners. © 2016 Motorola Mobility LLCTR02778_B。

随着中国广大车主的要求逐渐向个性化转变，汽车后市场的个性化产品日趋受到欢迎，特别是富有浓厚DIY色彩的汽车音响更是受到了前所未有的的青睐。

然而，许多车主对于汽车音响的态度恐怕是基于家庭音响认知，习惯用家用动辄数万元的发烧Hi-Fi标准来衡量汽车音响。

在家用音响的领域中，同样也有5000元以下就配套齐全、效果不错的家庭影院，汽车音响产品的研发当然也要考虑消费者的接受能力。

大多数情况下，初次改汽车音响的车主，对于汽车音响的完整系统（车载CD主机、汽车音响、功放、超低音）认知不全，通常会从自身的体验考虑。

最常见的，就是在不改动原车的CD主机或者原车DVD的情况下，拆掉原车成本低廉的纸盆喇叭，换上一套能够有明显音质改善的套装喇叭。

而且，出于对原厂喇叭形象的阴影，绝大多数的会选择入门级的进口汽车音响品牌。

为了让更多的车主能够有一个明确的选择指导，CarCA V依据网络平台收集了改装次数最多、口碑反应最好、质量有保证的原车CD主机或原车DVD就能够直接推动的进口汽车音响。

在不加装汽车音响功放、超低音其它等器材，只是简单更换套装喇叭的情况下，就能让车主感受明显的音质提升。

通过初步筛选，经CarCA V中国汽车影音网统计暂时确定以下型号：主机直推的进口汽车套装喇叭音响系列：法国FOCAL劲浪165A1套装喇叭主机直推的进口汽车套装喇叭音响系列：美国JBL GTO608C 套装喇叭主机直推进口汽车音响套装喇叭系列：意大利赫兹HERTZ ESK165套装喇叭主机直推的进口汽车音响套装喇叭系列：德国Maestro曼斯特CS6508IV套装喇叭主机直推的进口汽车音响套装喇叭系列：德国彩虹DL-C6.2套装喇叭以色列摩雷（Morel） MAXIMO玛仕舞两分频套装喇叭瑞典德利仕（DLS） RS6N两分频套装喇叭美国来福（Rockford）R1652-S /1675两分频套装喇叭美国金凤凰（Phoenix Gold）R65CS 两分频套装喇叭德国喜力士（HELIX）B62C两分频套装喇叭美国豪客（MOHAWK）MG6.2两分频套装喇叭德国零点（GROUND ZERO）165T两分频套装喇叭以上是初步筛选型号，欢迎CarCA V中国汽车影音网广大网友添加补充！以色列摩雷玛仕舞套装喇叭（原车主机直推）在以色列摩雷（Morel）的经济型汽车音响产品中，摩雷玛仕舞（Maximo）系列喇叭是续6x之后的又一高性价比的入门级尤物，它将成为6x的“继承者”，此款产品在观感和音质上都优于6x！另外它的高音单元设计也很特别，可以进行微小角度的调整。

SOUNDBAR 850重要安全说明请阅读并保留所有安全、安全性和使用说明。

重要安全说明请阅读这些说明。

请仅用干布进行清洁。

请勿堵塞任何通风口。

请按照制造商的说明安装。

请勿安装在任何热源旁，例如暖气片、热调节装置、火炉或可产生热量的其他设备（包括扩音器）。

只能使用制造商指定的附件/配件。

任何维修事宜均请向合格的人员咨询。

如果设备有任何损坏，均需进行维修，例如电源线或插头受损、液体溅入或物体落入设备内、设备受雨淋或受潮、不能正常工作或跌落。

警告/小心此符号表示产品外壳内存在未绝缘的危险电压，可能会造成触电危险。

此符号表示产品指南中提供了重要的操作和维护说明。

包含小部件，可能会导致窒息。

不适合 3 岁以下的儿童使用。

本产品含有磁性材料。

关于是否会影响可植入医疗设备的情况，请咨询医生。

本产品含有钢化玻璃表面。

请小心使用以避免撞击。

如果破损，请小心处理破碎的玻璃。

• 为降低火灾或触电危险，切勿将本产品暴露在雨中、液体中或湿气中。

• 本产品不得受液体淋溅或喷洒，不得将装有液体的物体（如花瓶等）置于本产品上或本产品附近。

• 请将本产品放置到远离火源和热源的地方。

请勿将明火火源（如点燃的蜡烛）置于本产品上或靠近本产品。

• 未经授权切勿改装本产品。

• 请勿将本产品与逆变器配合使用。

• 请勿在汽车或船舶上使用本产品。

• 如果将电源插头或设备耦合器作为断路设备，那么此类断路设备应当保持可随时恢复工作的状态。

• 只能使用以下硬件安装本产品：Bose 条形音箱壁挂架。

• 放置产品时，请确保它没有阻塞电视或显示器上的任何通风孔。

请参阅电视或显示器随附的用户指南，并按照制造商的说明进行安装。

• 由于有通风需求，Bose 不推荐将本产品放置在有限的空间中，比如墙洞或封闭式橱柜。

• 请勿让儿童接触电池。

• 如果处理不当，电池可能导致着火或化学灼伤。

请勿对其进行充电、拆解、加热或焚化。

中国危险物质限用表生产日期：序列号中第八位数字表示生产年份；“1”表示 2011 年或 2021 年。

路虎极光顶配英国之宝汽车音响再次无损升级改装_优美声8.12NT 小编平常总说，不同的人对于汽车音响的追求是不同的，有人原车就能满足、有人需要改装十多万才能满足。

今天为大家呈现的是路虎极光顶配版英国之宝的再次升级（原车无损再次升级优美声AUTO 8.12NT）。

车主的要求是原车的喇叭不动，提升音质。

根据车主的要求我们为车主推荐优美声的自动调音dsp这款产品，将前后门的喇叭全部发挥出更好的。

成都九戈汽车音响改装店 1
今天到店的这款路虎极光是全车11路主动系统，如果想要将整车升级则需要11路的输出，前门6路，后门四路，外加一只中置喇叭（这款喇叭没有中置喇叭）。

成都九戈汽车音响改装店 2
原车自带一款功放，需要先将原车的功放拆下来使用设备测试一下原车的线路哪条是哪个喇叭。

一次将原车的每一根线都一一标记，以便于优美声dsp加装接线的方便。

成都九戈汽车音响改装店 3
此为这款车的原车功放。

路虎极光11路主动，需要单独接线到dsp。

路虎极光的座椅下方空间很小，所以只有放置再后备箱备胎下方才不会占用任何的空间。

成都九戈汽车音响改装店 4
成都九戈汽车音响改装店 5
轮胎放置在这些产品的上方（轮胎和后备箱铁皮还有一定的空间），不会直接压在产品的上方。

很多朋友就会问：“产品散热问题大吗？”，后备箱备胎处的空间很大，产品自身也有一定的散热功能。

但是产品不散热肯定是不可能的。

加装的这样一款产品就能让原车配置英国之宝的路虎揽胜整体音质再上一层，屏幕前开路虎的你还在犹豫什么呢？？
成都九戈汽车音响改装店 6。

车主是通过上门咨询了解到我们的，车主本来一开始只是准备单单的做一下隔音，但是知道我们推出了一部分音响优惠套餐之后，就把自己的音响系统进行了升级，车主说：本来一开始准备后来再把音响系统进行升级的，但是如果现在进行升级的话，可以省下一比可观的费用。

所以车主当时立马决定了把自己的音响系统也升级一下。

配置清单：隔音：全车大能隔音隔音部位：四门底盘后备箱引擎盖后尾盖叶子板前声场：意大利TEC SPL/6K后声场：德国喜力士B6X功放：美国ARC XDI80.4低音：德国喜力士B12E此次的主人公，闪亮登场我们从车主车上拆下来的东西会把他放置好。

只要车主的车一进了我们店里并确认施工之后，我们师傅就会把他当做是自己的车一样，把它给保护好。

隔音篇：首先开始的当然是四门咯思铂睿的车门和其他车型的车门一样，基本上都没有什么隔音处理。

车门隔音：车门是风噪的主要来源，对这个部位的有效隔音处理，将很明显的降低风噪，更可以大幅度提高车门上喇叭的音质，减少共振，让喇叭能在类似家用的音箱一样发挥出好的音质。

贴好第一层的样子，这层主要是强化车身：四门双层隔音，不仅有效的抵挡风噪的侵袭，还可以使车门形成一个类似箱体的空间，增加车门的厚度，使车门更加结实，这样就可以让汽车音响有更大的提升空间：底盘距离地面比较近，而且面积也比较大很容易受到胎噪和路噪的侵入，做好底盘可以后可以有效的降低胎噪和路噪而且在过颠簸路面的时候会感觉到车子更加扎实紧凑，小沙石撞击底盘的声响也得到了明显的降低。

贴好第一层的效果：贴好第二层的效果：后备箱隔音：后备箱为车内噪音的主要来源，对这个部位的有效隔音处理，将大幅度降低路噪，更可以大幅度提高安装在后备箱低音炮的音压音质，后备箱和车门隔音共同组成汽车隔音的基础工程。

贴好第一层的样子：贴好第二层的样子：技术支持：音响篇：前声场意大利TEC SPL/6K这款喇叭适合听人声、古典、流行风格的音乐爱好者。

后声场德国喜力士B6X这款同轴喇叭喜力士入门级别的同轴喇叭，功率相对较小，灵敏度较高。

杭州道声拒绝平庸——奥迪Q7汽车音响改装，集结顶级器材奥迪Q7的音响系统比起一般车型的音质好很多，对于对音乐细节要求不会太高的车主来说可以听听了，原车音响系统虽然解析力可以，但是中频部分偏薄，低频有点浑，对于对音响比较发烧的车友来说，自然无法满足其耳朵。

奥迪Q7是豪车的代名词！豪车是归于豪车。

但是原车音响并不豪华，而是那么的简陋，音响效果更是那么的简单！对于听音要求稍微有点高的车友，那是难以接受的！原车音响的缺点：虽然说前声场是三分频，而且是主动式的，光看起来这样的配置是很高的了！但是其整体声音的层次感，饱和度，力度，远远不够！声音比较干涩，偏硬！低频与中音的频段衔接很差！其优点就是平衡感相当不错的，这是无可否认的事实！这也是原车音响的一贯风格，追求整体声音的平衡感；所以，在更高的音乐追求之下，车主来到我们杭州道声汽车音响改装旗舰店，为自己的爱车更换一套更好更“狠”的音响系统：奥迪Q7汽车音响改装配置单：主机：原车主机+Lasixi信号处理器频谱仪/储物盒：阿尔派H800+C800前声场喇叭：美国K牌QS顶级两分频套装喇叭后声场喇叭：美国K牌RS65.2套装喇叭超低音单元：美国K牌CVX12寸低音2个功放1：意大利欧迪臣A V5.1功放功放2：美国K牌2500.1功放电容：傲铁马军用电瓶隔音：STP航空炸弹、航空金卫士、航空晶片、SPL08四门、尾箱隔音汽车音响改装店家：杭州道声专业汽车音响改装旗舰店奥迪Q7进入到改装室，将车身保护好，准备进行改装：车门内层第一层STP 航空炸弹减震隔音：Q7门板挺不错，双层钢板，留有小部分孔，这让施工增加了不少难度。

车门第二层外层密封隔音：车门实际上却是一个空间不规则、充满孔洞的薄钢板，如果不做任何隔音处理，喇叭装在上面会有超过50%的音乐表现力由于这种安装环境的缺陷而损失，而做过隔音的车门好比是经过加强的音箱，达到试音柜的作用，可以让喇叭重放出较佳的效果，因此车门音响的改装隔音必不可少。

ix3模拟声浪音效实测摘要：I.引言A.ix3 模拟声浪音效的背景介绍B.文章目的和结构II.ix3 模拟声浪音效的实测过程A.测试设备与方法B.测试环境与条件C.测试结果与分析III.ix3 模拟声浪音效的优缺点A.优点1.高保真度2.环绕立体声效果3.高度还原真实声浪B.缺点1.部分用户可能觉得过于刺激2.音效可定制性不高IV.ix3 模拟声浪音效的应用场景A.驾驶体验1.提升驾驶乐趣2.提高驾驶安全性B.娱乐产业1.游戏音效设计2.音乐制作V.结论A.ix3 模拟声浪音效的实测总结B.对未来音效技术的展望正文：【引言】近年来，随着科技的发展，汽车音响系统逐渐成为提升驾驶体验的重要元素。

其中，模拟声浪音效作为提升驾驶乐趣的一种手段，备受广大车主和音响爱好者的关注。

ix3 作为一款具有高保真度和环绕立体声效果的模拟声浪音效产品，受到了市场的热烈欢迎。

本文将通过对ix3 模拟声浪音效的实测，分析其优缺点及应用场景，以帮助读者更好地了解和选择该产品。

【ix3 模拟声浪音效的实测过程】为了全面评估ix3 模拟声浪音效的性能，我们采用了以下测试设备与方法：1.测试设备：专业音频分析仪、高保真音响系统、ix3 模拟声浪音效设备2.测试方法：在多个测试环境下，分别对ix3 模拟声浪音效的音质、音效、立体声等方面进行评估。

【ix3 模拟声浪音效的实测结果与分析】经过多次测试，我们发现ix3 模拟声浪音效在音质、音效和立体声方面表现出色。

其高保真度和环绕立体声效果为用户带来了高度还原的真实声浪体验。

然而，部分用户可能觉得其音效过于刺激，且音效的定制性不高。

【ix3 模拟声浪音效的优缺点】总的来说，ix3 模拟声浪音效具有以下优点：1.高保真度：ix3 模拟声浪音效能够准确还原声浪的细节，为用户带来沉浸式的驾驶体验。

2.环绕立体声效果：ix3 模拟声浪音效采用环绕立体声技术，让用户仿佛置身于真实的赛车场景。

3.高度还原真实声浪：ix3 模拟声浪音效通过对声浪的采集、分析和处理，实现了对真实声浪的高度还原。

每一次的升级也是一次自我成长的过程，宝马3系的这位客位之前是在别人换过了一套“哈曼卡顿”至于市面上的哈曼卡顿是真是假，我只能呵呵了，我相信哈曼卡顿公司应该不是只有一次声明过，市面上在售的所有哈曼卡顿全新，都是假货！但这也难不过此品牌的号召力，还是有一大批人在改这样的假哈曼！宝马的原车音响差，应该是很多宝马车主深切的体会过了的！
歌德主张，一切以结果为导向，声音才是客户最终追求的东西！一套德国ETON伊顿宝马专用的方案应声出来了！客户是玩耳机出声，相对来说，对品质的要求会更一些。

中高频选用的是来自德国ETON伊顿的双项技术加声的RSE系列中音和陶瓷系列高音！
全车配置：
车型：宝马3系改音响
前声场：德国ETON伊顿RSE80+陶瓷高音
前声场：德国EOTN伊顿宝马专用系列低音195
功放：美国ARC XDI1200.6六声道功放
线材：正力线材
系统点评：
整套系统是一个全主动分频系统（有配一个DSP），通过歌德调音师的精细调试后，中高频表现声音干静，层次感明显！低频因为配的是宝马专用的8寸低音单元，整体的低频下潜较深！整体氛围感出来了！。

融会贯通作者：马凯玲等来源：《音响改装技术》2014年第04期去年年底业内忽然掀起一股名为“西海岸”的风潮，这对于一个刚涉足国内汽车音响行业的品牌来说，是非常罕见的。

如果没记错的话，让他迅速打起名号的应该便是它那宝马专用产品。

包括笔者在内，相信很多人都认为这是一个以宝马专用音响为核心产品的品牌，但通过在网上查找资料发现，西海岸这个品牌，远远没有我们想象的那么简单。

作为一个由美国本土汽车音响爱好者创立的汽车音响品牌，西海岸在当地有着极大的影响力，他们早期成名是由于他们强大的汽车改装能力。

如我们熟知的美国歌手Justin Bieber贾思丁·比伯以及前NBA巨星大鲨鱼奥尼尔座驾的改装，都是出自西海岸技师们的巧手。

更令人惊讶的是，除了西海岸在汽车音响领域中名气极大，在如轮毂，美容产品都有着更大的突破。

外观工艺如果说要用一句话总结对西海岸的HE650C-3way第一印象，我想我会用时下最热的网络用词高端大气上档次。

如果不说品牌的话，其实你很难感觉HE650C-3way是来自美国品牌的产品。

比起以往以粗犷见称的美国品牌包装，它多了几分精致和细腻。

HE650C-3way的产品分别安放在两个白桦木盒之内，打开其中一个木盒我们可以看到套装中的中低音喇叭以及高音喇叭整齐地摆放在内。

也许是为了更好地保护产品，我们在木盒内也发现了一套丝质的白手套，一般来说这样的包装规格只有在欧洲品牌的高端产品上才能看到。

如果要说原因的话，西海岸之所以如此“另类”，也许是得益于其销售公司Maxxsonics在美国多年来的销售运营经验。

据了解，除了西海岸之外，Maxxsonics同时也是MB Quart等音响品牌的执行公司，凭借多年来高端音响品牌的包装及销售经验，再搭配上西海岸对于产品质量的执着，成就了西海岸的品牌名声。

美国品牌走音质路线早已经不是什么新鲜的事，西海岸的这款HE650C-3way也正是走SQ 音质型路线。

下面来简单介绍一下产品的特性，中低音单元采用子弹头式纸盆振膜，音盆振膜是纸质并掺入特种纤维，以获得更佳的刚性与音色表现。

海南汽车音响改装：本田思域再度乐动施工类型：音响、隔音升级施工材料：法國勁浪Utopia Be Kit N°7/N°7 Active、大白鲨隔音隔热、英國創世紀功放Dual Mono(DM)、美國捷力汽車功放Slash500/1v2导读：随着科技的发展，物质更新换代的频率也逐渐加快，从人们使用的手机便可从中发现，现在的手机不再是大哥大，也不再是以前的只是接电话、发短信的工具，现在的手机已经发展成浓缩版的电脑，作为苹果手机迷的粉丝更是深切体会，从第一部苹果手机开始，便一直拥护至今，且不论现如今感想如何，但这条追逐的历程，却是真实的反应出作为苹果手机拥护者的心理。

汽车音响也不例外，对于汽车音响爱好者的车主而言，追逐一款适合自己听音效果的音响成为爱好，就像苹果迷一样，没有所谓的攀比，只是单纯爱好它，它能满足自身的需求，作为本田思域的车主亦是如此，为了使爱车更进一步的升级，车主在前几次的升级下决定再升级一次，寻求更高的聆听效果。

本田思域前脸造型，质感而英气俊朗，大气的尾部造型设计，更富质感与张力。

内饰做工较为精细，设计也比较时尚，层次感较为突出，功能配置比较丰富，只是大面积采用硬质塑料导致手感欠佳；座椅舒适性较好。

而作为本田思域的车主，是位音响小发烧友，为此，为爱车升级音响成为车主追求卓越音质的表现，旨在打造更舒适的车内环境。

以下为施工详解图：点评：为了打造更舒适的车内环境，聆听更美的音质效果，车主在前几次的升级下，这次再来，无非是想为爱车再度创新，这次车主选用了法国劲浪乌托邦，外加3个英国创世纪功放及后尾箱大白鲨隔音隔热，这次的组合使得车身喇叭达到了一种极致，法国劲浪乌托邦本身的音质效果优美、扎实，耐听，加之众多功放的推动，更将效果表现得淋漓尽致，一场听觉盛宴就此产生。

发烧级汽车音响主机有哪些？十大顶级品牌不得不看好的汽车音响需要配好的主机，汽车音响界现在流行的主机，从重视纯音质型的简单主机，到具有强大DSP处理的数字高端机，都是日本美国的。

这些主机大部分都成为行业耳熟闻详的发烧主机，从阿尔派的入门级发烧机9887，至先锋的RS-D7X，高端主机成为发烧友梦寐以求的音源。

发烧级汽车音响主机有哪些？今天合肥车之港汽车音响改装就来看看全球最知名的发烧主机，让我们充分领略汽车音响文化的无限魅力。

1、汽车音响发烧主机鼻祖：Alpine 7909首先请大家捡起一段历史，请要请大家一起为它的出现而致敬，它就是阿尔派的7909，从CD机刚出现不久后的1989年，日本阿尔派公司就开发了这款CD机。

这款CD机连当时最著名的音乐人ERIC在他的别克GRAND National上都采用了这款顶级主机，无论是从外观还是音质，在当时的汽车音响世界都可谓突破，如采用两个DAC处理器，18倍率的超取样，以及数位长度达18，而不是传统的16bit。

这些技术在当今都有超前意义，从现在回首当时的7909，无疑是非常地超前。

2、时下最流行的至尊：日本先锋RS-D7XRS - D7X，是日本先锋在本土的高端品牌carrozzeriaX的最顶级的产品，它也是由以前先锋的ODR系列产品的主机发展而来的。

日本先锋为了提升D7X的音质，每年都在东京为其举行一次比赛，因此，我们现在可以看到D7X现在已到第四代了。

D7X的技术优势有很多，而最顶尖的就是它的完全无谐振的抗振机芯，采用可吸收高速振动而影响控制电流的部件，在材料上应用最大限度减少光盘的皮卡振动的M2052阻尼合金材料，完全消除振动和噪声信号而影响读碟，使光头读取数据有更高的准确性。

在与原车风格的配套方面，D7X也是作了许多非常好的调整。

如全铝面板加工，色调采用深黑色，照明用LED灯显示颜色可用白色照明和琥珀色双色调整。

珍珠白色256X16的有机显示屏，支持中文汉字显示。