CSE3210 CBSD Languages (9)

Dell PowerEdge C5230 系统硬件用户手册管制型号： B04S注、小心和警告本文中的信息如有更改，恕不另行通知。

©2013Dell Inc.保留所有权利。

未经 Dell Inc. 书面许可，严禁以任何形式复制这些材料。

本文中使用的商标：Dell™、DELL 徽标和 PowerEdge™ 是 Dell Inc. 的商标。

Intel ® 和 Intel ® Xeon ® 是 Intel Corporation 在美国和其他国家/地区的注册商标。

Microsoft ®和 Windows ® 是 Microsoft Corporation 在美国和/或其他国家/地区的商标或注册商标。

Red Hat ® 和 Red HatEnterprise Linux ® 是 Red Hat, Inc. 在美国和/或其他国家/地区的注册商标。

SUSE™ 是 Novell Inc. 在美国和其他国家/地区的商标。

本出版物中可能使用其他商标和商品名称来指拥有相应商标和商品名称的公司或其产品。

Dell Inc. 对不属于自己的商标和商品名称不拥有任何专有权益。

管制型号：B04S 2013-11 Rev.A00注：“注”表示帮助您更好地使用系统的重要信息。

小心：“小心”表示如果不遵循说明，就有可能损坏硬件或导致数据丢失。

警告：“警告”表示可能会导致财产损失、人身伤害甚至死亡。

目录1重要信息 (5)关于系统 (6)前面板功能部件和指示灯 (6)2使用系统设置程序 (9)Start（开始）菜单 (9)引导时的 BIOS 设置选项 (10)控制台重定向 (10)配置特殊键 (11)一般帮助 (12)服务器平台设置公用程序屏幕 (12)Main（主屏幕）菜单 (13)Advanced（高级）菜单 (15)Boot（引导）菜单 (40)Server Management（服务器管理） (42)Security（安全保护）菜单 (50)保存并退出 (51)错误处理 (53)设置选项的命令行界面 (84)3安装系统组件 (85)建议使用的工具 (85)系统内部组件 (86)目录3底座配置 (87)底座 (88)内存模块 (90)硬盘驱动器 (94)硬盘驱动器板 (100)散热器 (103)处理器 (106)4故障排除 (109)故障排除顺序 (109)更新公用程序 (112)BIOS 系统更新 (118)BIOS 恢复模式 (118)5跳线和连接器 (119)系统板跳线和连接器 (119)2.5 英寸硬盘驱动器板连接器 (122)3.5 英寸硬盘驱动器板连接器 (123)背板连接器 (123)配电板连接器 (125)PDB 电源和 SMBus 连接器 (125)6获得帮助 (127)索引 (129)4目录重要信息5重要信息•您的系统必须具有 BIOS 版本 1.0.2 或更高版本，才能支持 Intel Xeon E3-1200 v3 系列处理器。

c os 2标准教程C OS 2标准教程。

C OS 2是一种用于操作系统开发的标准，它提供了一种通用的接口，使得操作系统可以在不同的硬件平台上运行。

本教程将介绍C OS 2标准的基本概念、原理和应用，帮助读者快速掌握C OS 2的开发技术。

一、C OS 2标准概述。

C OS 2标准是由C OS 2工作组制定的，它包括了一系列的API和规范，用于定义操作系统与硬件之间的接口。

C OS 2标准的出现，使得不同厂商开发的操作系统可以在相同的硬件平台上运行，极大地提高了操作系统的兼容性和可移植性。

C OS 2标准的核心是一组API，包括文件管理、内存管理、进程管理、设备管理等功能。

开发者可以通过调用这些API来实现操作系统的各种功能，而不需要关心具体的硬件细节，大大简化了操作系统的开发过程。

二、C OS 2标准的原理。

C OS 2标准的实现依赖于硬件的支持，因此需要硬件厂商提供符合C OS 2标准的设备驱动程序。

这些设备驱动程序需要实现C OS 2定义的API，以便操作系统可以通过统一的接口与硬件进行通信。

另外，C OS 2标准还规定了操作系统的基本架构和模块化设计，使得不同的操作系统可以共享相同的代码库和资源。

这种模块化的设计有利于操作系统的维护和升级，同时也方便了应用程序的开发和移植。

三、C OS 2标准的应用。

C OS 2标准已经被广泛应用于各种操作系统中，例如Linux、Windows、macOS等。

这些操作系统都提供了符合C OS 2标准的API，使得它们可以在相同的硬件平台上运行，实现了跨平台的兼容性。

此外，许多嵌入式系统和物联网设备也采用了C OS 2标准，以实现不同设备之间的互联互通。

C OS 2标准的应用范围非常广泛，已经成为操作系统开发的重要标准之一。

四、C OS 2标准的未来。

随着物联网和人工智能等新兴技术的快速发展，C OS 2标准将继续发挥重要作用。

未来，C OS 2标准可能会进一步完善和扩展，以适应新的硬件和应用场景的需求。

Cisco 服务器安装
CISCO UCS C210 M2(R210-BUN-1)
1.用笔记本的网线直连服务器的控制口【CIMC】，用dhcp软件给控制口分发一个ip地址。

如果dhcp软件不能分发地址给服务器，就手动开启服务器电源，等到开机出现cisco 图标的时候，按【f8】键，手动设置控制口ip地址。

有的地址的cimc的地址已经有了，知道对方地址后，如果设置同网段的ip无法ping 通，那么把对方的ip地址设置成网关。

还是无法ping通，
2.确定服务器获取到ip地址后，用ie浏览器登录服务器的ip。

登录的用户名：admin 密码：password
3.
如果点击键盘图标有报错的话，在控制面板里面删除ie 增强，安装java 软件。

看到显示界面后，在点击左上角的【键盘图标】，会开启，一个新的ie可视窗口，先选
择窗口上的【tool】菜单，在选择最下面的一行，进行挂载操作系统的iso文件和raid 卡的驱动，在一般的情况下，操作系统的iso文件是被挂载到光驱中，而radi卡的驱动是被挂载到软驱中，也就是a：盘。

，
还有种方法是在加载raid卡驱动和windows2003 ，在启动的时候，按f6键选择安装raid卡驱动，在选择按S键，会弹出选择raid卡驱动，选择正确的raid卡驱动继续。

4．选择power on开启服务器电源，然后等待系统自动检测iso文件，正常安装操作系统。

IBM Maximo Asset Configuration ManagerVersion 7.6.2Quick Start GuideThis guide introduces IBM Maximo Asset Configuration Manager Version 7.6.2, provides a link to a list of prerequisite software, gets you started with a typical installation, and provides a roadmap to other important information.National Language Version:To obtain the Quick Start Guide in other languages, print the language-specific PDF file from the installation media.Product overviewIBM®Maximo®Asset Configuration Manager provides organizations with features to manage the builds of high-value, complex, and regulated assets such as aircraft, locomotives, or missiles. Maximo Asset Configuration Manager is a rules-based configuration management system that is based on MIL-STD-1388-2B, a United States military standard that uses the Logistics Support Analysis Record (LSAR).Before you install the product, read the IBM Maximo Asset Configuration Manager version 7.6.2 Installation Guideexisting release notes for this product (/support/knowledgecenter/SSLKSJ_7.6.2/com.ibm.acm.doc/common/relnotes.html). Release notes contain the latest information that is relevant to the installation of this product. If no additional information is available, this link returns no search results.For complete information, including installation instructions, see the Maximo Asset Configuration Manager in IBMKnowledge Center (/support/knowledgecenter/SSLKSJ_7.6.2/com.ibm.acm.doc/welcome.html).2Step 2: Plan the installationYou install Maximo Asset Configuration Manager on a Microsoft Windows administrative workstation. Ensure that IBM Maximo Asset Management version 7.6.0.3 is installed on the same administrative workstation where you plan to install Maximo Asset Configuration Manager version 7.6.2, and in the same language as Maximo Asset Configuration Manager version 7.6.2.You must have system administrator rights and privileges to install the product.For information about the hardware, software, and network requirements for your product, see the System Requirements section in the Overview and Planning page on the Maximo Asset Management wiki (https:///developerworks/community/wikis/home?lang=en#!/wiki/IBM%20Maximo%20Asset%20Management/page/Overview%2 0and%20planning)3Step 3: Install the productTo install Maximo Asset Configuration Manager:1.Review the software requirements.2.If you are upgrading to Maximo Asset Configuration Manager version 7.6.2 from an earlier version of Maximo AssetConfiguration Manager, see the Upgrade Guide for IBM MaximoProducts on the IBM Support Portal(/support/entry/portal/Overview/Software/Tivoli/Maximo_Asset_Management).3.Prepare to install.4.Install Maximo Asset Configuration Manager.5.For Oracle WebLogic Server environments only: you must deploy the Enterprise Application Archive (EAR) files.6.For the IBM WebSphere®Application Server environments: The EAR files are installed when you install the processautomation engine. If this task was deferred during the Maximo Asset Configuration Manager installation, deploy the EAR files.Detailed instructions are in the IBM Maximo Asset Configuration Manager 7.6.2 Installation Guide in IBM Knowledge Center (/support/knowledgecenter/SSLKSJ_7.6.2/com.ibm.acm.doc/welcome.html).IBM®More informationAfter you install the product, use IBM Knowledge Center to learn more about the product.For more information, see the following resources:v Product support (/support/entry/portal/Overview/Software/Tivoli/Maximo_Asset_Configuration_Manager)v IBM User Communities (https:///social/aggregator/ibm)Maximo Asset Configuration Manager Licensed Materials - Property of IBM. © Copyright IBM Corp. 2008, 2015. U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.IBM, the IBM logo, and ®are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at “Copyright and trademark information” (/legal/copytrade.shtml).Printed in Ireland。

X20(c)BC00831 General informationThe bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler.POWERLINK is a standard protocol for Fast Ethernet with hard real-time characteristics. The POWERLINK Stan-dardization Group (EPSG) ensures openness and continuous advancement. •POWERLINK•I/O configuration and Firmware update via the fieldbus•Integrated hub for efficient cabling2 Coated modulesCoated modules are X20 modules with a protective coating for the electronics component. This coating protects X20c modules from condensation and corrosive gases.The modules' electronics are fully compatible with the corresponding X20 modules.For simplification purposes, only images and module IDs of uncoated modules are used in this data sheet.The coating has been certified according to the following standards:•Condensation: BMW GS 95011-4, 2x 1 cycle•Corrosive gas: EN 60068-2-60, method 4, exposure 21 days2.1 Starting temperatureThe starting temperature describes the minimum permissible ambient temperature when the power is switched off at the time the coated module is switched on. This is permitted to be as low as -40°C. During operation, the conditions as specified in the technical data continue to apply.Information:It is important to absolutely ensure that there is no forced cooling by air currents in a closed control cabinet, for example using a fan or ventilation slots.3 Order dataTable 1: X20BC0083, X20cBC0083 - Order data 4 Technical dataTable 2: X20BC0083, X20cBC0083 - Technical dataTable 2: X20BC0083, X20cBC0083 - Technical data1)See Automation Help under "Communication / POWERLINK / General information / Hardware - CN" for more information.2)The minimum cycle time specifies the time up to which the bus cycle can be reduced without communication errors occurring.3)Spacing is based on the width of bus base X20BB80. In addition, power supply module X20PS9400 or X20PS9402 is always required for the bus controller.5 Operating and connection elements5.1 LED status indicators1)The Status/Error LED "S/E" is a green/red dual LED. LED status indicators - Blink times5.2 POWERLINK node numberThe node number for the POWERLINK node is set using the two number switches.5.3 Ethernet interfaceFor information about wiring X20 modules with an Ethernet interface, see section "Mechanical and electrical con-figuration - Wiring guidelines for X20 modules with Ethernet cables" of the X20 user's manual.Ethernet RXD 6 Dynamic node allocation (DNA)Most POWERLINK bus controllers have the ability to dynamically assign node numbers. This has the following advantages:•No setting of the node number switch •Easier installation•Reduced error sourcesFor information regarding configuration as well as an example, see Automation Help → Communication → POW-ERLINK → General information → Dynamic node allocation (DNA)Information:Interface IF1 must always be used as the input from the preceding node.7 SG3This module is not supported on SG3 target systems.8 SG4The module comes with preinstalled firmware. The firmware is also part of the Automation Runtime operating system for the PLC. With different versions, the Automation Runtime firmware is loaded onto the module.The latest firmware is made available automatically when updating Automation Runtime.。

isc bind (multiple issues)ISC Bind（也称为BIND或BIND9）是一个用于将域名解析为IP地址的DNS服务器。

它是由Internet Systems Consortium（ISC）开发的开源软件。

关于ISC Bind的多个问题，其中包括两个已被广泛讨论的安全漏洞。

第一个漏洞涉及DNAME解析记录的签名校验。

攻击者可以利用此漏洞让服务器对包含恶意DNAME解析记录签名校验的请求进行响应，这可能导致resolver.c或db.c发生断言错误，最终导致BIND named主进程崩溃，造成拒绝服务攻击。

递归解析器和在特定条件下的权威服务器（例如，当Slave master发起SOA查询时）都可能受到影响。

即使授权服务器不进行身份验证或完全禁止DNSSEC配置，只要其接受包含恶意签名校验的应答，也将受到影响。

第二个漏洞存在于ISC BIND rndc控制实例中，对请求输入处理存在设计缺陷。

该漏洞可导致sexpr.c或alist.c发生断言失败，最终导致在给named进程发送畸形数据包时，named 进程退出。

此外，还有一个漏洞（CNVD-2020-29429，对应CVE-2020-8617）涉及BIND代码对TSIG资源记录消息的正确性检查。

攻击者可以通过发送精心构造的恶意数据，使进程在tsig.c位置触发断言失败，导致BIND域名解析服务崩溃。

为了解决这些问题，建议采取以下措施：1. 及时更新BIND软件：确保使用的是最新版本，其中包含了针对这些漏洞的修复程序。

2. 限制网络访问：通过配置防火墙或访问控制列表（ACL），限制对BIND服务器的网络访问，以减少攻击面。

3. 禁用不必要的服务：关闭不需要的DNS服务或功能，以减少潜在的安全风险。

4. 监控和日志记录：启用详细的日志记录功能，并定期检查日志以发现任何可疑活动或攻击迹象。

5. 安全配置：对BIND进行安全配置，例如限制递归查询、启用DNSSEC等，以提高安全性。

Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System xProduct Guide (withdrawn product)The Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x delivers high-bandwidth and industry leading low latency 10 GbE connectivity. With industry-leading performance, power-efficiency, integration and feature set, ConnectX-2 EN with RDMAoE (RDMA over Ethernet) adapters provide an optimized, low-latency solution for high-transaction databases, financial services, cloud computing, and virtualized server and storage data center environments. The ConnectX-2 Dual-Port 10 GbE Adapter improves network performance by increasing available bandwidth to the CPU and providing enhanced performance especially in virtualized server environments.The adapter is shown in Figure 1.Figure 1. Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System xDid you know?Click here to check for updatesDid you know?The Mellanox ConnectX-2 Dual Port 10GbE Adapter for IBM System x is a a high-performance, dual-port network adapter for 10Gb/s Ethernet (10GbE) networks with performance requirements for low latency. It provides an ideal solution for all servers needing high- performance, low-latency data transfer in LAN connectivity for mission-critical applications. This network adapter provides support for 10GbE networking with optical or copper connectivity.Part number informationThe part number to order this card is shown in Table 1.Table 1. Ordering part number and feature codeDescription Part number Feature code Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x81Y9990A1M4The adapter has two empty SFP+ cages that support either SFP+ SR transceivers or twin-ax direct-attached copper (DAC) cables as listed in Table 2.Table 2. Supported transceivers and direct-attach copper (DAC) cablesDescription Part number Feature code Optical TransceiversQLogic 10Gb SFP+ SR Optical Transceiver49Y42180064Brocade 10Gb SFP+ SR Optical Transceiver49Y42160069IBM SFP+ SR Transceiver46C34475053Active Direct-attach copper (DAC) cables1m IBM Active DAC SFP+ Cable95Y0323A25A3m IBM Active DAC SFP+ Cable95Y0326A25B5m IBM Active DAC SFP+ Cable95Y0329A25CPassive Direct-attach copper (DAC) cables0.5m IBM Passive DAC SFP+ Cable00D6288A3RG1m IBM Passive DAC SFP+ Cable90Y9427A1PH3m IBM Passive DAC SFP+ Cable90Y9430A1PJ5m IBM Passive DAC SFP+ Cable90Y9433A1PK7m IBM Passive DAC SFP+ Cable00D6151A3RH Features and benefitsSupported serversThe adapter is supported in the IBM System x servers listed in Table 3.Table 3. Supported System x servers (Part 1)Mellanox ConnectX-2 Dual Port 10 GbE AdapterN N N N N N N N Y N N N Y N NTable 3. Supported System x servers (Part 2)Mellanox ConnectX-2 Dual Port 10 GbE AdapterY Y Y N N N Y N Y N Y N N Y YSupported operating systemsTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Intelligent ClusterServerProven®System x®The following terms are trademarks of other companies:Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.Mellanox ConnectX-2 Dual Port 10 GbE Adapter for IBM System x (withdrawn product)11。

产品概述可实现快速安装的 DSP — Bose CSP -1248 商用音频处理器是包括扬声器、控制中心和软件在内的综合平台的一部分，可帮助安装人员高效地配置优质音响系统。

板载 CSP 配置实用程序和基于浏览器的直观用户界面可提供快速设置工作流。

以逻辑性的方式呈现常见任务，因此您可以更快地配置系统，从而缩短安装时间，同时提高安装准确性。

安装后，Bose 专有算法带来可预测的性能，同时 ControlCenter 数字区域控制器和 ControlSpace Remote 远程控制应用程序等可选配件可让终端用户实现轻松操作。

关键特性连接尺寸适中，适合经济型商业安装 - 8 x 4 平衡模拟输入/输出，4 对混音单声道 RCA 输入、8 个控制输入、1 个控制输出、静音触点、以太网接口和 Bose AmpLink 连接CSP 配置实用程序具有基于浏览器的用户界面，便于实时显示和设置电平、路由、阈值、 优先级、设定事件、Bose 扬声器 EQ 、输入和区域 EQ后面板以太网接口适用于 PC/Mac 配置；同时还可以连接 ControlCenter 数字区域控制器和 ControlSpace® Remote 远程控制应用程序自动音量补偿会根据环境噪声不断调整区域输出电平，只需与 Bose AVM-1 感应麦克风 （单独出售）配合使用即可Opti -voice 寻呼功能可提供音乐和广播之间的平滑过渡Opti -source 电平管理可监控多达 4 个音源的输入电平，在切换音源时保持一致的音量SmartBass 处理可在任何音量下对支持的 Bose 扬声器扩展低音的性能和响应Bose AmpLink 输出可简单地将数字音频与兼容的功率放大器连接，减少中断和相关故障点直观的终端用户操作 — 可选的 ControlCenter CC-1D 、CC-2D 和 CC-3D （单独出售） 数字区域控制器和 ControlSpace Remote 远程控制应用程序能够提供轻松的音量控制和音源选择应用零售餐厅酒店技术数据Bose CSP -1248 商用音频处理器技术规格q RCA 输入 – 四对混音单声道用于连接非平衡音源w 平衡输入 – 八路平衡模拟麦克风/线路输入（配备可选的 +48V 幻象电源）ePBX 输入 – 用于 600 Ω 电话系统的专用寻呼控制输入r 平衡输出 – 四路平衡模拟线路输出t MOH 输出 – 标准平衡输出或用于 600 Ω 音乐保持 (Music On Hold) 电话系统的音源。