飞利浦榨汁机产品分解实验79页PPT

1〃目的对果汁机制程检验规范做出规定，使产品满足客户要求。

2〃范围泰国单/双头果汁机产品检验 4．职责产品模具投产前由QE 全尺寸检验并制做检具提供给检质员， 检质员按本规范对产品进行检验。

5〃检验条件与环境产品BOM 、合同单、SIP 、与工程图各一份、卡具 检验工具：拉尺、游标卡、角度尺、签样样品、通止规 与产品目视距离30cm,呈45角度 目检时间为10—15秒 光线为正常光灯60W6.9907199065990699940399418-3整机前面/A检验方法1.对材质及厚度检查2.首件使用卡尺及拉尺检验，2.巡检时与首件比较。

.巡检每2PCS以上/40分飞角及冲孔应注意操作工放料定位否规范，使用限度样板比较校检，检查是否少孔。

方法重叠对准光线进行，孔位、孔数进行校对，当有遮光时就不合格/少孔管制标准/要求检具检验方法1.对材质及厚度检查。

巡检每2PCS以上/402.首件使用卡尺及拉尺检验，对角线公差控制在±0.5mm内，2.巡检时与首件比较。

飞角及冲孔应注意操作工放料定位否规范，使用限度样板比较校检，检查是否少检验项目管制标准/要求检具检验方法检具检验方法1.对材质及厚度检查。

巡检每6.5 21.7a检具检验方法表面不能有氧化、生锈、发霉等不良现 目检目检检验频次 首件2 PCS 巡检每小时一次，生产全检。

要求底板电制插孔方向在后 目检目检 方向目检 目检 组装配件数量99418D 面板检具99418D 面板试装抽检，按GB2828-2003。

离心式水果榨汁机的机械设计摘要摘要：随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。

本设计介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理，是利用刀片和离心力共同的作用下，将大块水果旋转打成糊状。

榨汁机的结构也相对简单，包括榨汁壳体榨汁部分电动机部分和出汁部分组成。

这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。

而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。

单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。

最后，我相信我们所设计的这台集专业化、智能化、自动化、高效化、小型化、简单化、环保化、安全性为一体的水果榨汁机能够早日走进千家万户。

关键词:离心式榨汁机、电机选配、壳体设计、榨汁部件设计The Mechanical Design of Centrifugal Juice ExtractorABSTRACTAbstract: With the continuous development of science and technology, agricultural mechanization technology development to a new level; with the development of agricultural mechanization technology and people living standard rise, the improvement of fruit juicer became a hot issue of consumer concern right now. Juicer this design introduced the research significance, research status quot of juicer, analyzes the prospect of juicer, centrifugal juicer is described in detail the working principle of the common is the use of blades and centrifugal force, under the action of the large fruit rotation until sticky. The structure of the juicer is relatively simple, including juice shell Motor parts and the juice of part of the juice. This group design with centrifugal juicer is more unique to better meet consumers' willingness to all in line with simple, convenient and practical for the principle from the interests of consumers. Moreover, the juicer before removing the juicer end of juice yield, fruit juice is not clear. Single-phase series motor autoimmune and high efficiency fully embodies the, miniaturization and simplification, environmental protection, etc.Finally, I believe that we can design the machine set autoimmune and high efficiency, intelligent, professional, miniaturization, simplification, environmental protection, safety of fruit juicer can walk into homes at an early date.Keywords：centrifugal juice extractor, the choice of electromagnet, The design of rind, the design of squeeze parts目录前言 (1)第1章离心式榨汁机的总体设计方案 (5)1.1 榨汁机的基本结构 (5)1.1.1 榨汁机壳体 (5)1.1.2 榨汁部件 (5)1.1.3 电动部件 (5)1.2 离心式榨汁机的工作原理 (5)1.3总体设计要点 (6)第2章电动机的选择 (7)2.1 电动机的选择 (7)2.1.1 电动机类型的选择 (8)2.1.2 电动机额定功率的确定 (10)第3章榨汁部件的设计 (12)第4章榨汁机壳体的设计 (13)4.1 榨汁机壳体材料的选择 (13)4.1.1 端盖的设计 (13)4.1.2 离心外壳的设计 (14)4.2 电机外壳的设计 (15)4.3 底座的设计 (16)4.4 料杆的设计 (17)4.5 盖锁的设计 (18)4.6 果汁杯、果渣盒的设计 (19)4.7 斜齿轮轴伸的设计 (19)第5章榨汁机的使用和保养 (21)结论 (22)谢辞 (23)参考文献 (24)前言通过大学三年对基础知识和专业知识的学习，以及各种专业实习，我较系统地学习、了解、掌握了基本理论知识和机械制造专业的专业基础知识。

Avance JuicerMicroMasticating technologyInspiring recipesfor the Philips Avance Collection Juicers 飞利浦Avance系列榨汁机激发灵感的食谱RecipesGrasshopper 9 Green Eyecatcher 1 1 Red Sensation 1 3 Cranapple Juice 1 5 Summer Sun 1 7 Piña Lavender 1 9 Beautylicious 2 1 Farmers Market Juice 2 3 Hangover Remedy 2 5 Deep Red Flamingo 2 9 Love It Up 3 1 Mixed Berry Jelly 3 3 Pear Blossom 3 5 Immunblast Juice 3 7 Bunny Delight 3 9 Pure Citrus 4 1 Fitness Wonder 4 3 Workout Punch 4 5 Veggietastic 4 7 Green Booster 4 9 Power Shot 5 1 Cold Prevention 5 3 Fresh Breeze 5 5 Yellow Thunder 5 7 Tomato Basil Soup 5 9 Heart Rocker 6 1 Purple Power Punch 6 3 Ruby 6 5 Pepperino 6 7 Sunny Peach 6 9 Red Passion 7 1 Frozen Yoghurt 7 3 Milk Shake 7 5 Soy-Milk / Almond milk 7 7 Sorbet 7 9 Sunset 8 1 Orange Vision 8 3 Melon Symphony 8 5 Berry Blast 8 7Grasshopper 9 Green Eyecatcher 1 1 Red Sensation 1 3 Cranapple Juice 1 5 Summer Sun 1 7 Piña Lavender 1 9 Beautylicious 2 1 Farmers Market Juice 2 3 Hangover Remedy 2 5 Deep Red Flamingo 2 9 Love It Up 3 1 Mixed Berry Jelly 3 3 Pear Blossom 3 5 Immunblast Juice 3 7 Bunny Delight 3 9 Pure Citrus 4 1 Fitness Wonder 4 3 Workout Punch 4 5 Veggietastic 4 7 Green Booster 4 9 Power Shot 5 1 Cold Prevention 5 3 Fresh Breeze 5 5 Yellow Thunder 5 7 Tomato Basil Soup 5 9 Heart Rocker 6 1 Purple Power Punch 6 3 Ruby 6 5 Pepperino 6 7 Sunny Peach 6 9 Red Passion 7 1 Frozen Yoghurt 7 3 Milk Shake 7 5 Soy-Milk / Almond milk 7 7 Sorbet 7 9 Sunset 8 1 Orange Vision 8 3 Melon Symphony 8 5 Berry Blast 8 7食谱开胃鸡尾酒鲜绿亮眼红色迷情越橘苹果汁夏日阳光椰香薰衣草迷人美味新鲜活力解酒汁深红火烈鸟爱意晋级什锦浆果冻梨花盛开免疫增强果汁橙趣纯柑橘汁健康惊喜健身活力奇妙蔬菜翠绿鲜活活力源泉感冒克星微风沁心激情惊雷蕃茄罗勒汤摇滚心四射紫色活力红宝石彩椒汁阳光鲜桃红色激情冷冻酸奶奶昔豆奶/杏仁奶冰糕日落云霞橙色视觉瓜果交响浆果干茶Making juicing betterPhilips is now introducing a new-generation juicer that will allow you to unleash all the goodness of fruits and vegetables into your glass, so that you can enjoy a highly nutritious glass of juice every day! Philips is a global leader in healthcare and personal well-being, and focuses on improving people’s lives through meaningful innovation. As leading juicer brand worldwide, Philips gives you the results you want by developing the most advanced products – such as the Avance juicer with MicroMasticating technology.Extract up to 90% of the whole fruitThe new Philips Avance Juicer is designed to help you toget the very best out of fruits and vegetables. Thanks to its MicroMasticating technology, you can now squeeze up to 90%of the whole fruit* into your glass. Fruits and vegetables are composed of millions of cells that contain juice rich in vitamins and nutrients. MicroMasticating technology opens up these cells by cutting the external and internal cell walls into microscopic parts, thereby releasing more of the goodness from fruits and vegetables for you to enjoy.Clean in less than one minuteYour new Philips Avance juicer was designed to make daily juicing possible even on your busiest days. It’s easy to use and quick to clean because the pre-clean function helps to get the last drops of juice into your glass while removing leftovers from the juicing chamber. Afterwards, it takes less than a minute for you to rinse all the necessary parts clean under the tap – and you don’t need to clean the sieve, because there isn’t one! Healthy, tasty juice every dayWith its slim design (only 11cm wide), the Philips Avancewas thoughtfully designed for your kitchen worktop. It’s also been created to give you the benefit of a very wide range of ingredients: you can pop in a banana, mango, avocado or even almonds, wheatgrass, leaves and nuts. Surprise yourself or your loved ones with a different healthy and tasty juice full of delicious, concentrated goodness every day.*In internal tests conducted on grapes, watermelons, tomatoes, apples, oranges, strawberries and pine-apples in Austria in 2015, the amount of juice extracted ranged from 69% to 92%, depending on the fruit.Micro Masticating technology提升果蔬汁质量飞利浦推出新一代榨汁机， 将滴滴果蔬精华释放到杯中，让您每一天都能享受到一杯富含营养的果汁。

摘要随着社会的不断发展，食品机械化技术发展到了一个新的水平；随着食品机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。

本文介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了水果榨汁机的工作原理。

希望设计的水果榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。

而且，该榨汁机祛除了以前榨汁机出汁率低、果汁不清的弊端。

单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。

最后，我相信所设计的这台集专业化、智能化，自动化、高效化、小型化、简单化、环保化、安全性为一体的榨汁机能够早日走进消费者的家庭。

【关键词】水果榨汁机、电机选配、壳体设计、榨汁部件设计。

ABSTRACTSince the continuous development of today's society,food mechanization technology development to a new level; As food mechanization technology development and people living standard rise, the improvement of fruit juicer became a hot issue of consumer concern right now. This paper introduces the research significance of the juicer, juicer, research status, analyzes the prospect of juicer, fruit juicer working principle is described in detail. Hope fruit juicer can design more unique to better meet consumers' willingness to all for the principle of simple, convenient, and practical in the interests of the consumers. Moreover, the juicer before removing the juicer end of juice yield, fruit juice is not clear. Single-phase series motor automatization and high efficiency fully embodies the, miniaturization and simplification, environmental protection, etc.Finally, I believe that can design the machine set professional, intelligent, automation,and high-effectiveness, miniaturization, simplification, environmental protection, security, as one of the juicer can into the consumer's family at an early dateKeywords: Fruit juicer The choice of electromotor The design of rind The design of squeeze parts目录摘要 (I)ABSTRACT .................................................................. I I 目录 ................................................................... I II一. 引言 (1)1.1毕业论文选题的背景意义产品现状 (1)1.2目前市面上热销水果榨汁机品牌 (2)1.3目前市面上能见到的榨汁机类型 (2)二.水果榨汁机的总体结构设计 (4)2.1 榨汁机的基本结构 (4)2.1.1榨汁机壳体 (4)2.1.2榨汁部分 (4)2.1.3电动机 (4)2.2 水果榨汁机的工作原理 (4)三.榨汁机壳体设计 (5)3.1榨汁机壳体材料的选择 (5)3.2榨汁机壳体的设计 (5)3.2.1端盖的设计 (5)3.2.2榨汁机外壳的设计 (6)3.2.3电机外壳的设计 (7)3.2.4底座的设计 (8)3.2.5推杆的设计 (8)3.2.6刀座的设计 (8)3.2.7滤杯的设计 (9)四.榨汁部分设计 (10)五.电机的选择 (11)5.1电动机的选择要求 (11)5.2电动机类型的选择 (12)5.3电动机额定功率的确定 (14)六.榨汁机的使用与维护保养 (15)6.1使用与维护 (15)6.2使用注意事项 (15)结论 (16)参考文献 (17)附录I (18)致 (19)一. 引言通过大学几年年对基础知识和专业知识的学习，以及各种专业实习，学习和了解的掌握了基本理论知识和机械制造专业的专业基础知识。

榨汁机造型与结构设计说明书(总43页)-CAL-FENGHAI.-(YICAI)-Company One1-CAL-本页仅作为文档封面，使用请直接删除长春工业大学毕业设计、毕业论文题目榨汁机造型与结构设计学院机电工程学院专业班级工业设计100108班指导教师侯力莉姓名滕怀志2014年6月10日摘要本文从工业设计的角度出发，对家用榨汁机进行造型与结构设计。

通过前期的市场调研，并查阅了大量的文献资料，了解并掌握了榨汁机的工作原理，对现有榨汁机的造型有了深入认识和设计想法。

此款榨汁机采用手动榨汁的方式，通过手摇把手转动，带动齿轮传动系统将力传递给螺旋推进杆进行榨汁，榨汁效率高，可以很好地实现渣汁分离。

在结构造型方面，可以让使用者操作起来更加的协调舒适。

榨汁机色彩主要以绿色为主，意味着新鲜的果汁给人们带来健康、安全的生活。

整个榨汁机的材料使用食品级安全塑料PP，对于健康有保证，让人们可以放心安全使用。

在电器充斥生活每个角落的年代，采用传统的手动方式进行榨汁，可以让人们体验劳动的快感，燃起对生活的热爱。

关键词：榨汁机；手动；健康生活；设计THE SHAPE AND STRUCTURE DESIGN OF JUICERAbstractFrom the perspective of industrial design,the essay introduces the modeling and structural design of juicer machine. Through the pre-research about market of the juicer machine ,with the access to a large number of documents,it understands and master the working principle of juicer machine .What’s more,it has in-depth understanding of the shape and design ideas about the existing juicers.The design of the juicer uses manual control rotating hand grip,the driving force is transmitted to screw that is used to juice by the gear transmission system . The juicing efficiency is high ,you can achieve a good separation of the residue and juice of the fruits .In terms of structural modeling,it allows users to operate more coordinated and color is mainly based on green,it means that the fresh juices can bring people healthy and safe Juicer material uses food grade safe plastic material PP,it is guaranteed for that people can be assured to use safely.In the age of electric equipment,juicing by conventional way can allows people to experience the thrill of labor and arouse the love of life.Key Words：Juicer；Manual ；Healthy Lifestyle；Design目录中文摘要 ................................................................ 英文摘要 (I)引言 01 课题分析 (1)选题背景 (1)研究目的 (1)研究意义 (1)2 市场调研分析 (2)国内市场 (2)国外市场 (2)产品对比 (3)现有榨汁机分析 (4)预景和展望 (5)设计定位 (5)3 设计方案 (6)方案一 (7)方案二 (7)方案三 (9)方案四 (10)方案评估 (10)评估方法 (11)最终方案的确定 (11)4 设计要素分析 (11)形态分析 (11)色彩分析 (12)材质分析 (12)食品级安全塑料材质分类： (12)材料的确定 (14)人机工程分析 (14)5 三维造型设计 (15)建模软件的选择 (15)建模过程 (15)产品效果图 (21)6 工程图设计 (23)7 制作产品模型 (25)快速成型机的工作原理 (25)模型的加工过程 (26)模型的后期处理 (29)8 制作设计展板 (30)结论 (30)致谢 (32)附录A 调查问卷 (33)参考文献 (35)引言产品设计会涉及到众多因素，而产品设计的关键所在是在设计中如何协调诸多要素间的关系。

湘潭大学兴湘学院毕业设计说明书题目：高速离心式果汁机的结构设计学院：兴湘学院专业：机械设计制造及其自动化学号： 2010963011 姓名：指导教师：完成日期：2014年6月目录摘要 (1)第一章榨汁机设计前期调查 (1)、研究方法和榨汁机的现状 (3) (3) (4) (4) (5)榨汁机的设计 (6).1榨汁机的类型 (6)榨汁机的现状分析 (7).3对新型榨汁机设计的一般要求 (7)榨汁机的发展前景 (8)第二章离心式榨汁机的总体设计方案 (9)榨汁机方案的比较 (9) (9)低速挤压式果汁机 (9)第三章电机的选择与校核 (9)电动机的选择要求 (10)电动机类型的选择 (10)电动机额定功率的确定 (13)键的强度校核 (13)第四章榨汁部件的设计 (17)回转篮的设计 (17) (17)榨汁机壳体材料的选择 (17) (18)第五章榨汁机的使用和保养 (23)摘要随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。

本文介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理。

这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。

而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。

单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。

最后，我相信我们所设计的这台集专业化、智能化，自动化、，高效化、小型化、简单化、环保化、安全性为一体的榨汁机能够早日走进消费者的家庭。

关键词离心式榨汁机、电机选配、壳体设计、榨汁部件设计全套图纸，加153893706AbstractIn recent years, the rotary digging pile driver has obtained the fast development of our country "but compared with rotary digging pile driver in a foreign country for decades, the development history of domestic rotating drill in key components and core technology, there is still a gap compared with abroad, the development of rotary digging pile driver in China is still a long way to go.This paper studied the power head as an important item of the rotary digging pile driver host, has been the key components of the host research "the performance is good or not directly affect drilling efficiency" the development of the driver in a foreign country has several ten years of history, the development of the power head has a superior performance!Unique technology and new design concept of "the development of the current domestic power head can meet the construction work of rotary digging pile driver basic reliability and function extension but still need further development.It is difficult to retrieve the rotary digging pile driver power head system design and development of related literature, no literature at home and abroad and use for reference ", therefore, this topic for power system analysis and research, as important item in the rotary digging pile driver development projects, hope will bring the rotary digging pile driver product development as a reference.Keywords: rotary digging pile driver, power head, drive way, the driver, the speed reducer第一章榨汁机设计前期调查及现状论文选题的依据和研究意义春夏秋冬，任何一个季节都有它的独特性，但对于热爱生活的人来说，无论是初夏季节还是如今的严寒冬日，“补水“都变得格外重要。

离心式水果榨汁机的机械设计摘要摘要：随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。

本设计介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理，是利用刀片和离心力共同的作用下，将大块水果旋转打成糊状。

榨汁机的结构也相对简单，包括榨汁壳体榨汁部分电动机部分和出汁部分组成。

这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。

而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。

单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。

最后，我相信我们所设计的这台集专业化、智能化、自动化、高效化、小型化、简单化、环保化、安全性为一体的水果榨汁机能够早日走进千家万户。

关键词:离心式榨汁机、电机选配、壳体设计、榨汁部件设计The Mechanical Design of Centrifugal Juice ExtractorABSTRACTAbstract: With the continuous development of science and technology, agricultural mechanization technology development to a new level; with the development of agricultural mechanization technology and people living standard rise, the improvement of fruit juicer became a hot issue of consumer concern right now. Juicer this design introduced the research significance, research status quot of juicer, analyzes the prospect of juicer, centrifugal juicer is described in detail the working principle of the common is the use of blades and centrifugal force, under the action of the large fruit rotation until sticky. The structure of the juicer is relatively simple, including juice shell Motor parts and the juice of part of the juice. This group design with centrifugal juicer is more unique to better meet consumers' willingness to all in line with simple, convenient and practical for the principle from the interests of consumers. Moreover, the juicer before removing the juicer end of juice yield, fruit juice is not clear. Single-phase series motor autoimmune and high efficiency fully embodies the, miniaturization and simplification, environmental protection, etc.Finally, I believe that we can design the machine set autoimmune and high efficiency, intelligent, professional, miniaturization, simplification, environmental protection, safety of fruit juicer can walk into homes at an early date.Keywords：centrifugal juice extractor, the choice of electromagnet, The design of rind, the design of squeeze parts前言 0第1章离心式榨汁机的总体设计方案 (4)1.1 榨汁机的基本结构 (4)1.1.1 榨汁机壳体 (4)1.1.2 榨汁部件 (4)1.1.3 电动部件 (4)1.2 离心式榨汁机的工作原理 (4)1.3总体设计要点 (5)第2章电动机的选择 (6)2.1 电动机的选择 (6)2.1.1 电动机类型的选择 (7)2.1.2 电动机额定功率的确定 (9)第3章榨汁部件的设计 (11)第4章榨汁机壳体的设计 (12)4.1 榨汁机壳体材料的选择 (12)4.1.1 端盖的设计 (12)4.1.2 离心外壳的设计 (13)4.2 电机外壳的设计 (14)4.3 底座的设计 (15)4.4 料杆的设计 (16)4.5 盖锁的设计 (17)4.6 果汁杯、果渣盒的设计 (18)4.7 斜齿轮轴伸的设计 (18)第5章榨汁机的使用和保养 (20)结论 (21)谢辞 (22)参考文献 (23)通过大学三年对基础知识和专业知识的学习，以与各种专业实习，我较系统地学习、了解、掌握了基本理论知识和机械制造专业的专业基础知识。