Titanium Dioxide Zeolite
- 格式:pdf
- 大小:1.31 MB
- 文档页数:9
钛白粉钛白粉学名为二氧化钛(Titanium Dioxide)成分结构它有金红石型(Rutile R型)和锐钛型(Anatase 型)二种结构,金红石晶体结构致密,比较稳定,光学活性小,因而耐候性好,同时有较高的遮盖力,消色力。
应用领域钛白粉在橡胶行业中既作为着色剂,又具有补强、防老化、填充作用。
在白色和彩色橡胶制品中加入钛白粉,在日光照射下,耐日晒,不开裂、不变色,伸展率大及耐酸碱。
橡胶用钛白粉,主要用于汽车轮胎以及胶鞋、橡胶地板、手套、运动器材等,一般以锐钛型为主。
但用于汽车轮胎生产量,常加入一定量的金红石型产品,以增强抗臭氧和抗紫外线能力。
钛白粉在化妆品中应用也日趋广泛。
由于钛白粉无毒,远比铅白优越,各种香粉几乎都用钛白粉来代替铅白和锌白。
香粉中只须加入5%-8%的钛白粉就可以得到永久白色,使香料更滑腻,有附着力、吸收力和遮盖力。
在水粉和冷霜中钛白粉可减弱油腻及透明的感觉。
其他各种香料、防晒霜、皂片、白色香皂和牙膏中也可用钛白粉。
用钛白粉制得的瓷釉透明度强,具有质量小、抗冲击力强、机械性能好、色彩鲜艳、不易污染等特点。
食品和医药用钛白粉为纯度很高、重金属含量低、遮盖力强的钛白粉。
GR复合钛白颜料---替代钛白粉使用----钛白粉---钛白---钛白颜料----复合钛白颜料----二氧化钛GR复合钛白颜料是精选结构外型和粒度分布等与钛白类似,且表面具有反应活性的无机粉体为基本原料(内核),TiO2为包膜物,应用新材料改性复合制备、无机包膜、粉体均化等高新技术,通过二者的分割细化,表面羟基化改造和机械力化学反应等方式制备而成的新型复合白色颜料,它具有与钛白粉相同或近似的物化性质,因而具有二氧化钛颜料性质。
广泛应用于涂料、塑料、橡胶、油墨行业,可取得与使用钛白粉相同的技术性能,且较大幅度地降低原材料的使用成本。
GR复合钛白颜料的生产和应用,是解决钛白粉生产中的钛资源短缺、降低环境污染、提高钛白资源利用率的有效途径。
tio分子量什么是tio分子量tio分子量是指二氧化钛(Titanium dioxide)的分子量,也被称为titanium dioxide molecular weight。
二氧化钛是一种常见的化合物,化学式为TiO2。
它是一种白色固体,常用作颜料、涂料和陶瓷这类应用中。
tio分子量的计算要计算出tio分子量,我们需要知道元素钛和氧的原子量。
根据元素周期表的数据,钛的原子量为47.867 g/mol,氧的原子量为15.999 g/mol。
二氧化钛(TiO2)的分子式中包含一个钛原子和两个氧原子。
因此,我们可以将二氧化钛的分子量计算公式表示为:分子量(TiO2)= 原子量(钛)+ 2 × 原子量(氧)将具体的数值代入计算公式,我们可以得到:分子量(TiO2)= 47.867 g/mol + 2 × 15.999 g/mol分子量(TiO2)= 47.867 g/mol + 31.998 g/mol分子量(TiO2)= 79.865 g/mol因此,二氧化钛的分子量为79.865 g/mol。
tio分子量的应用tio分子量广泛应用于材料科学、化学工程和化妆品等领域。
1. 材料科学二氧化钛是一种常见的材料,被广泛应用于制备陶瓷、涂料和塑料等材料。
掌握二氧化钛的分子量可以帮助科学家了解其化学性质和应用特性,并优化材料设计和制备过程。
2. 化学工程二氧化钛在化学工程中有着重要的应用。
例如,它可以作为催化剂,在化学反应中起到催化作用。
了解二氧化钛的分子量,有助于工程师确定合适的催化剂用量,并优化反应条件。
3. 化妆品二氧化钛是许多化妆品的主要成分之一。
它常常被用作防晒剂,能够对抗紫外线的辐射。
掌握二氧化钛的分子量可以帮助化妆品生产企业确定产品中二氧化钛的含量,从而保证产品的品质和功效。
tio分子量的重要性tio分子量的正确计算和理解对于相关领域的研究和应用至关重要。
首先,准确的分子量信息可以帮助科学家更好地理解和预测化合物的性质和行为。
钛白粉一、定义:钛白粉学名为二氧化钛( Titanium Dioxide),分子式为TiO2,相对分子质量79.90。
CAS 登录号:13463-67-7 ,EINECS 登录号:236-675-5.也称钛白。
是一种白色颜料,具有无毒、最佳的不透明性、最佳白度和光亮度,是目前世界尚性能最好的一种白色颜料。
二、分类:1.按结晶形态不同分为:金红石型(Rutile R型)和锐钛型(Anatase A型)二种结构。
2.按包膜程度不同分为:A1、A2、R1、R2、R33.按生产工艺的不同分为:硫酸法钛白粉和氯化法钛白粉。
4.按表面极性的不同分为:亲水性、亲油性和两水性三种。
三、成分结构它有金红石型(Rutile R型)和锐钛型(Anatase A型)二种结构。
四、性能指标1、含量锐钛型≧98% 金红石型≧92%2、白度:白度标注大都采用和标样进行比较或采用 L、a、b 表示。
几乎所有的应用行业都要求良好的白度。
钛白粉的杂质和粒子对白度有显著的影响。
CIE(commission internationals de eclairage)是国际照明协会的简称 CIE 制定了 L,a和 b值来测量色值,这种测量方法称为 CIELAB。
L代表着明度,从明亮(此时 L=100)到黑暗(此时 L=0)之间变化。
A值表示颜色从绿色(-a)到红色(+a)之间变化,而b值表示颜色从黄色(+b)到蓝色(-b)之间变化。
影响白度的主要因素:良好的粒径分布是产品白度色相稳定的基本条件。
它包括两个方面:1)适中的力度大小,一般情况下颜料粒径的直径为可见光的波长的一半时,可以达到最好的白度,即 0.15-0.35um 2)集中的力度范围,颜料颗粒直径的分布范围要小。
表示在图像上就是要窄。
3、消色力:钛白粉与其他颜料混合后显示他本身颜色的能力,一般是同标样比较或用雷诺数来表示:和标样比较的是相对消色力。
雷诺数是利用色差计(CR-300 色差仪)测得各个光学数据后计算而得。
氧化钛介电常数氧化钛(titanium dioxide,简称TiO2)是一种重要的功能材料,在各个领域具有广泛的应用。
其中,氧化钛的介电常数是其重要的物理性质之一,对于其在电子器件、光电器件等领域的应用具有重要意义。
介电常数是描述物质对电场响应能力的物理量,也可以理解为材料在电场作用下的极化程度。
对于氧化钛而言,其介电常数与其晶体结构、化学组成、晶粒尺寸等因素密切相关。
氧化钛的晶体结构对其介电常数有重要影响。
氧化钛有多种晶型,常见的有金红石型(anatase)、锐钛矿型(rutile)和钛酸钡型(barium titanate)等。
这些不同的晶型具有不同的晶胞结构和原子排列方式,从而导致其介电常数的差异。
以锐钛矿型氧化钛为例,其介电常数可以高达几百,具有较高的介电常数,这使得其在电子器件中广泛应用。
氧化钛的化学组成也对其介电常数产生影响。
纯的氧化钛通常具有较低的介电常数,而通过掺杂其他元素或添加掺杂物,可以调控氧化钛的介电性能。
例如,铌掺杂的氧化钛具有较高的介电常数,可用于电容器等器件中。
氧化钛的晶粒尺寸也对其介电常数产生一定影响。
通常情况下,氧化钛的晶粒尺寸越小,其介电常数越高。
这是因为在较小的晶粒中,电子和离子受到晶界的影响较大,从而增强了电子和离子的极化程度,进而提高了介电常数。
因此,通过控制氧化钛的制备方法和条件,可以实现对其晶粒尺寸的调控,从而调整其介电常数。
在实际应用中,氧化钛的介电常数对于其在电子器件和光电器件中的性能起着重要的影响。
例如,在电容器中,介电常数越高,电容器的存储能力越大。
在太阳能电池中,氧化钛作为电子传输材料,其介电常数的大小会影响电子在材料中的传输速度和效率。
因此,对于氧化钛的介电常数的研究和调控具有重要的科学意义和应用价值。
氧化钛的介电常数是其重要的物理性质之一,对于其在电子器件、光电器件等领域的应用具有重要意义。
其介电常数受到晶体结构、化学组成和晶粒尺寸等因素的影响,通过调控这些因素可以实现对氧化钛介电常数的调控和优化。
酚甲酰胺25 500 酚糠醛25 520
热塑性塑料缩乙醛35 440
醇酸155 500 乙基纤维素20 340 合成橡胶30 320 醋酸纤维素35 420 四氟乙烯- 670 尼龙30 500 丙酸纤维素25 460 聚丙烯酰胺40 410 聚丙烯腈25 500 聚乙烯20 410
聚对苯二甲酸乙
酯
40 500 聚氯乙烯- 660 聚醋酸乙烯酯40 550 聚苯乙烯20 490 聚丙烯20 420
聚乙烯醇35 520 甲基纤维素30 360 木质素65 510 松香55 440
塑料一次原料己二酸35 550 酪蛋白45 520 对苯二酸50 680 多聚甲醛40 410 对羧基苯甲醛20 380
塑料填充剂软木35 470 纤维素絮凝物55 420 棉花絮凝物50 470 木屑40 430
农产品及其它玉米及淀粉45 470 大豆40 560 小麦60 470 花生壳85 570 砂糖19 410
**指游离SiO2低于10%,不含石棉和有毒物质,而尚未制定容许浓度的粉尘。
表中列出的各种粉2尘(石棉纤维尘外),游离SiO2高于10%者,却按矽尘容许浓度对待。
二氧化钛金红石砂形式英文回答:Titanium dioxide, also known as TiO2, is a widely used compound in various applications. It exists in different forms, and one of the most common forms is known as rutile. Rutile is a mineral form of titanium dioxide that has a reddish-brown color.Rutile is commonly used as a pigment in paints, coatings, and plastics due to its excellent opacity and brightness. It provides whiteness and enhances the color of the products it is used in. For example, when rutile is added to white paint, it gives the paint a brighter and more vibrant appearance. Similarly, when it is added to plastic materials, it improves their color intensity.Another important application of rutile is in sunscreen products. Due to its ability to absorb and scatter UV radiation, rutile is used as a UV filter in sunscreens. Ithelps to protect the skin from the harmful effects of the sun's UV rays. When applied to the skin, rutile particles form a protective layer that reflects and absorbs the UV radiation, preventing it from reaching the deeper layers of the skin.Rutile is also used in the production of ceramics and glass. It acts as a flux, which helps to lower the melting point of the materials and improve their workability. In addition, rutile can enhance the mechanical properties of ceramics, making them more durable and resistant to wear and tear.In summary, rutile, the sand form of titanium dioxide, has various applications ranging from paints and coatings to sunscreens and ceramics. Its unique properties make it a valuable compound in these industries.中文回答:二氧化钛,也被称为TiO2,是一种广泛应用于各种领域的化合物。
§09030二氧化鈦Titanium Dioxide別名:Titania;CI Pigment white 6;CI (1975) No.77891;INS No. 171;CAS No. 13463-67-7。
分子式:TiO2分子量:79.881. 定義:本品可經「硫酸鹽」或「氯化物」兩種製程產之,不同製程之條件決定最終晶體為銳鈦石﹙anatase﹚或金紅石﹙rutile﹚。
採硫酸鹽製程,係利用硫酸消化鈦鐵礦﹙FeTiO3﹚或鈦礦渣後,經一系列純化步驟分離出二氧化鈦,再經水洗、煅燒及微粉化。
採氯化物製程,係利用氯氣與含鈦礦物經還原反應生成無水四氯化鈦後,直接加熱氧化或與蒸氣反應純化二氧化鈦,或者利用濃鹽酸與含鈦礦物反應生成四氯化鈦溶液,經水解純化成二氧化鈦,再經過濾、沖洗及煅燒。
為改善產品特性,二氧化鈦可能包覆著少量的鋁或矽。
2. 含量:99.0 %以上﹙以乾重計,氧化鋁及二氧化矽不予計入﹚。
3. 外觀:白色至微帶色澤粉末。
4. 溶解度:不溶於水、鹽酸、稀硫酸及有機溶劑。
在氫氟酸及熱的濃硫酸中可緩慢溶解。
5. 鑑別:本品0.5 g 加入硫酸5 mL,緩慢加熱直到硫酸冒煙後冷卻。
小心地加水稀釋至100 mL並過濾,取濾液5 mL加數滴過氧化氫試劑,立即呈現橙紅色。
6. 乾燥減重:0.5 %以下﹙105 ℃,3小時﹚。
7. 熾灼減重:1.0 %以下﹙800 ℃,以乾重計﹚。
8. 氧化鋁或二氧化矽:2 %以下(單一或共存)。
9. 酸可溶物:0.5 %以下;若含鋁或矽則在1.5 %以下。
10. 水可溶物:0.5 %以下。
11. 0.5 N鹽酸可溶物:(1)銻:2 mg/kg以下。
(2)砷:1 mg/kg以下。
(3)鎘:1 mg/kg以下。
(4)鉛:10 mg/kg以下。
12. 汞:1 mg/kg以下。
13. 分類:食品添加物第﹙九﹚類。
14. 用途:著色劑。
資料出自:.tw/foodnew/MenuThird.aspx?LanguageType=1&SecondMenuID=5&ThirdMen uID=174。
二氧化钛详细资料大全二氧化钛(化学式:TiO2,白色固体或粉末状的两性氧化物,分子量:79.9,是一种白色无机颜料,具有无毒、最佳的不透明性、最佳白度和光亮度,被认为是现今世界上性能最好的一种白色颜料。
钛白的粘附力强,不易起化学变化,永远是雪白的。
广泛套用于涂料、塑胶、造纸、印刷油墨、化纤、橡胶、化妆品等工业。
它的熔点很高,也被用来制造耐火玻璃,釉料,珐瑯、陶土、耐高温的实验器皿等。
同时,二氧化钛有较好的紫外线掩蔽作用,常作为防晒剂掺入纺织纤维中,超细的二氧化钛粉末也被加入进防晒霜膏中制成防晒化妆品。
二氧化钛可由金红石用酸分解提取,或由四氯化钛分解得到。
二氧化钛性质稳定,大量用作油漆中的白色颜料,它具有良好的遮盖能力,和铅白相似,但不像铅白会变黑;它又具有锌白一样的持久性。
二氧化钛还用作搪瓷的消光剂,可以产生一种很光亮的、硬而耐酸的搪瓷釉罩面。
二氧化钛一般分锐钛矿型(Anatase,简称A型)和金红石型(Rutile,简称R型)。
2017年10月27日,世界卫生组织国际癌症研究机构公布的致癌物清单初步整理参考,二氧化钛在2B类致癌物清单中。
基本介绍•中文名:二氧化钛•外文名:Titanium Dioxide•中文别名:钛白粉,钛糖,钛白•CAS NO:13463-67-7•EINECS:236-675-5•分子量:79.9•分子式:TiO2•主要晶型:金红石型、锐钛型•摩尔质量:79.8658 g·mol-1•折射率:2.76~2.55•莫氏硬度:6-7、5.5-6•电容率:114~31•线膨胀系数:25/℃•热导率:1.809~10.3•吸油度:16~48、18~30•溶解性:溶于热浓硫酸、盐酸、硝酸。
•性能:半导体物理性质,化学性质,表面性质,制备方法,防晒机理,套用领域,工业套用,食品套用,环境保护,防晒化妆品,分级,性能,安全信息,风险术语,安全术语,计算化学数据,物理性质相对密度:在常用的白色颜料中,二氧化钛的相对密度最小,同等质量的白色颜料中,二氧化钛的表面积最大,颜料体积最高。
钛白粉的性能及应用字体大小:大- 中- 小liuyahui发表于07-01-01 06:08 阅读(1408) 评论(0)钛白粉的性能及应用第一章概述1.1名称钛白粉的化学名称:二氧化钛,分子式TiO2,分子量79.9,其质量组成中59.95%为Ti,O占40.05%。
英文名:Titanic anhydride;Titanic oxide;Titanium dioxide;Titanium white;Titania;Titanium dioxide pigment。
别名:钛白,钛白粉。
通常人们把在涂料、油墨、塑料、橡胶、造纸、化纤、美术颜料和日用化妆品等行业中以白色颜料为主要使用目的的二氧化钛称为钛白粉、二氧化钛颜料或钛白,而把在搪瓷、电焊条、陶瓷、电子、冶金等工业部门以纯度为主要使用目的的二氧化钛称为二氧化钛或非颜料级钛白粉、非涂料用钛白粉。
1.2二氧化钛工业生产情况二氧化钛是一种重要的无机化工原料,无毒、对健康无害,是最重要的白色颜料,占全部白色颜料使用量的80%。
从全世界范围来说,所开采的钛矿90%以上用于TiO2颜料的生产。
1998年,世界总的TiO2颜料消费量为355万吨,按2000美元/吨的单价计其总价值为70亿美元,是仅次于合成氨和磷酸的第三大无机化工产品。
许多发达国家都将其列为关键化学品行列,在某些国家和地区,其生产量与国民生产总值成正比,它已成为衡量一个国家经济发展和人民生活水平高低的重要标志之一。
钛白粉的工业生产方法有氯化法和硫酸法两种,其中56%为氯化法产品,这种产品的70%以上又产自美国杜邦、克尔麦吉公司和美资美联公司,其他国家的钛白粉工厂仍以硫酸法为主。
我公司拟建的钛白装置也属于硫酸法。
我国钛资源储量居世界之首,到2000/2001年上半年,全国各钛白生产企业的产能总和将达到38万t/a。
除锦州铁合金总厂为氯化法生产外,其余厂家均为硫酸法。
世界钛白粉生产的特点是技术高度垄断,迄今为止,世界上只有20几个国家、30多家公司、50来家工厂生产钛白粉。
主要的紫外线吸收剂:◎OMC(辛-甲氧肉桂酸):最广为使用的化学性防晒成份。
能隔绝UVB,不容易引起过敏反应。
◎Octocrylene:较新的化学性防晒成份,能隔离UVB。
◎OCS(辛-水杨酸):本身是很弱的UVB阻隔剂,所以通常将它与其它UVB防晒成份一起使用,以加强防晒效果。
◎PABA(对-胺基苯甲酸):可隔绝UVB。
曾经一度被广为采用,后因发生过敏反应的比例太高,所以现在已很少使用。
后来研发出Padimate-O(辛-二甲基-对胺基苯甲酸),作为其替代品,刺激性较小,也只能隔绝UVB。
◎Oxybenzone(二苯甲酮-3):可隔绝UV A,有时会引起过敏。
◎A vobenzone(帕索1789):可隔绝UV A,常和Oxybenzone(二苯甲酮-3)混合使用。
有时会引起过敏。
◎Mexoryl SX:可阻隔波长较短的UV A。
紫外线屏蔽剂通常停留在皮肤表面,不会被吸收,也不由身体代谢。
具体是指利用防晒品中的粒子,阻挡、反射或散射掉紫外线,使到达皮肤的紫外线量得以减少。
因为不发生化学反应,所以对皮肤较温和。
紫外线屏蔽剂的缺点是透明感差,制成的产品涂在皮肤上像蒙了一层白霜。
此外,它们的用量不受国家的任何限制,可以用来制成SPF值非常高的产品,事实上SPF20以上的产品不含二氧化钛是不可能的。
◎Titanium dioxide(二氧化钛):可完全阻隔UVB,但只能隔绝波长较短的UV A,无法阻隔长光波。
◎Zinc oxide(氧化锌):几乎可以阻隔所有波长的UV A和UVB,且安全性较高。
但缺点是涂起来会发白,且较为粘腻。
后来有厂商研发出粒子较小的Z-Cote(氧化锌分子),其质地更具透明感,透气性更佳,改善了上述缺点。
Titanium Dioxide/Zeolite Catalytic Adsorbent for the Removal of NO and Acetone VaporsYan-Huei Jan,Liang-Yi Lin,Mani Karthik,and Hsunling BaiInstitute of Environmental Engineering,National Chiao Tung University,Hsinchu,Taiwan,Republicof ChinaABSTRACTThis study delineates a simple and versatile approach forthe removal of nitrogen monoxide (NO)and volatile or-ganic vapors over composites of titanium dioxide (TiO2)catalyst/zeoliteadsorbent under ultraviolet (UV)irradia-tion at ambient temperature.The catalytic adsorbentswith different TiO 2/H-ZSM-5zeolite ratios were preparedby a simple insipient wetness impregnation method.Itwas found that a 60%/40%weight ratio of TiO2/H-ZSM-5composite is most effective and can achieve over 90%efficiency for the removal of NO and acetone vapors.Thiscomposite also showed a better long-term activity thanthat of bulk TiO 2photocatalyst or zeolite adsorbent.Theexperimental results revealed that photocatalytic decom-position of NO was dramatically enhanced in the pres-ence of acetone.NO also promoted the acetone oxidationunder humid conditions.Furthermore,the co-existenceof acetone and NO in the gaseous stream could reduceacid accumulation on the surface of the catalyst as con-firmed by Fourier-transform infrared spectroscopy.Thus,the TiO 2/zeolite catalytic adsorbent could have a highpotential for the removal of multiple air pollutants in theindoor air environment.INTRODUCTIONIndoor air pollution has been recognized as one of themost important environmental problems.1Indoor air pol-lutants are emitted from various sources such as combus-tion processes,cooking stoves,office equipment,con-struction materials,consumer products,etc.1,2Variouskinds of air pollutants may be presented in the indoor airbecause of different sources of indoor air pollution,butnitrogen oxides (NO x )and volatile organic compounds(VOCs)have always been two of the most common air pollutants.For the protection of indoor air quality,adsorption is one of the traditional pollutant control techniques.Ad-sorbent such as activated carbon is most commonly used for the removal of air pollutants because of its high ad-sorption capacity and low operation cost.However,the adsorbent merely transfers pollutants from the gaseous phase to the solid phase.3–5For the past 2decades,it has been recognized that photocatalytic oxidation (PCO)using titanium dioxide (TiO 2)semiconductors is one of the attractive and effi-cient techniques for the complete destruction of harmful pollutants into nontoxic final products.6,7Furthermore,the semiconductor catalysts are inexpensive and capable of effectively destroying the gaseous pollutants.In this regard,numerous investigations have been conducted on TiO 2semiconductors for the photocatalytic destruction of various air pollutants such as VOCs 8–10and NO x .11–13Several studies have been investigated on the photo-chemical reaction and photodegradation mechanism of VOCs and NO x .For example,Atkinson 14–16reviewed the gas-phase reaction and photodegradation mechanism of VOCs and NO x in the troposphere.Ao et al.3,17–19have also demonstrated that the photoreaction and mecha-nism of nitrogen monoxide (NO);benzene,toluene,ethyl benzene,and xylenes (BTEX);NO;nitrogen dioxide (NO 2);and carbon monoxide (CO)at typical indoor air levels using TiO 2as a photocatalyst.Although it is not possible to evaluate the interactions of all indoor air pol-lutants by photocatalysis,a study of the interactions be-tween the major and common air pollutants using pho-tocatalysis is feasible and valuable.Most of the studies in the literature have mainly described removal of air contaminants by adsorption or photocatalytic destruction methods.The research works of Ao and co-workers 3,17–20have been the few references that have conducted the enhancement or inhibition ef-fects due to the simultaneous presence of multiple air pollutants.The composite materials of photocatalyst/ad-sorbent they used were TiO 2supported on activated car-bon (AC).Tao and co-workers 21,22have investigated the photocatalytic removal of methanol over a dual func-tional TiO 2/AC composite material.They found that a well dispersion of TiO 2particles on AC composite mate-rial prepared by dry impregnation method has a high photocatalytic activity for methanol removal.However,IMPLICATIONSIndoor air pollution has always been a problem that involvesmore than one air pollutant.However,there is usually onlyone air cleaner for removing several air pollutants,so thecombination of effective adsorbents/catalysts in one aircleaning device is a viable method to achieve this goal.Inthis study,the composite of TiO 2/H-ZSM-5as photocata-lytic sorbent under UV irradiation has been used to study itseffectiveness in removing common air pollutants of NO andvolatile organic compounds.The promotion effect on theremoval of these two air pollutants has been observed,andthis composite material has shown its high potential appli-cation to indoor air cleaning.TECHNICAL PAPER ISSN:1047-3289J.Air &Waste Manage.Assoc.59:1186–1193DOI:10.3155/1047-3289.59.10.1186Copyright 2009Air &Waste Management Association1186Journal of the Air &Waste Management Association Volume 59October 2009Thevenet et al.23conducted the photocatalytic enhance-ment of acetylene on TiO 2/AC and TiO 2/zeolite and com-pared with the bulk TiO 2,they found that zeolite signif-icantly improved the photoactivity,whereas AC was only identified as a pollutant pool.TiO 2-supported zeolites have attracted research inter-est as an active composite photocatalyst for the removal of toxic contaminants.24,25However,there is still limited information available on the photochemical interactions between VOCs and NO x during the simultaneous adsorp-tion and PCO process.In this regard,the purpose of this study was to evaluate the combined effects of TiO 2cata-lyst and zeolite adsorbent for the removal of NO and acetone vapors under ultraviolet (UV)irradiation at am-bient temperature.The removal efficiency of the catalyst/adsorbent composites was compared with those of bulk TiO 2(ST-01)catalyst and zeolite (H-ZSM-5)adsorbent,and optimal catalyst/adsorbent composition was ob-tained.Furthermore,the promotion effects of NO and acetone removal efficiencies because of the co-presence of the two pollutants were addressed.EXPERIMENTAL PROCEDURESPreparation of TiO 2/Zeolite Composite Materials The Na-form of ZSM-5zeolite (silicon/aluminum ratio 50,particle size 1.5–2m;Zeotyst,Ltd.)was converted into the H-form by repeated ion exchange.The zeolite and 0.05M ammonium nitrate solution (15mL/g of zeolite)were stirred at 80°C for 12hr.Then the material was filtered and washed with distilled water.The resulting filtered material was dried at 120°C for 6hr and subse-quently calcined at 550°C for 6hr.This H-form of ZSM-5zeolite was used as an adsorbent and support in this study.The TiO 2/zeolite-based composite photocatalysts were prepared by a simple incipient wetness impregnation method.An appropriate amount of TiO 2(ST-01,particle size 7nm,Ishihara Sangyo Kaisha,Ltd.)was added into 20mL of deionized (DI)water and stirred for 1hr.Then H-ZSM-5zeolite was added into the aqueous colloidal suspension of TiO 2.The above colloidal mixture was thor-oughly stirred for additional 1hr and agitated with son-ication bath (Tohama DC-400)for 10min.Then the above mixture was sprayed on a heating glass plate of 110°C.The total weight of all samples for comparison tests was fixed at 0.1g regardless of the weight percentageof TiO 2or zeolite.Repeated spraying,cooling,and weighting of the composite samples confirmed the total weight of sample.Characterization of TiO 2/Zeolite Composite Materials The crystalline nature of the calcined samples was ob-tained with Rigaku X-ray diffractometer equipped with nickel-filtered CuK ␣(ϭ1.5405Å)radiation.The diffrac-tograms of the calcined samples were recorded in the 2range between 2°and 60°in steps of 1°with a count time of 60sec at each point.The BET (Brunauer-Emmett-Teller)specific surface areas of the samples were measured by nitrogen gas (N 2)adsorption-desorption isotherms at 77K using a surface area analyzer (Micromeritics,ASAP 2000).All of the samples were degassed for 6hr at 350°C under vacuum (10Ϫ6mbar)before the adsorption experiments.The elemental titanium in the samples was analyzed by a SCIEX ELAN 5000inductively coupled plasma mass spec-trometer (ICP-MS).The infrared (IR)spectra of the sam-ples were obtained from a Fourier-transform IR (FTIR;FT-730)spectrophotometer using a potassium bromide pellet technique.Adsorption and Photocatalytic Experiments A photoreactor (dimensions of 5.5-cm height ϫ63-cm length ϫ10-cm width)was made up of acrylic resin-type material and a glass plate with 300mm of length,50mm of width,and 1mm of thickness was used as a coating substrate that was placed inside of the photoreactor.The photocatalysts were dispersed in DI water by using soni-cation method.The photocatalytic degradation of NO and acetone vapors was carried out using a continuous flow photoreactor under UV irradiation at ambient tem-perature.Figure 1shows a schematic diagram of the ex-perimental setup used in this study.A feed gas of reactant mixture containing NO (10parts per million by volume [ppmv]),acetone (110ppmv),and air (balance)were passed through two different mass flow controllers to the photoreactor.It is noted that typ-ical concentrations of indoor air pollutants such as VOCs and NO x are usually in a few parts per million (ppm)to sub-ppm levels.26,27However,for the sake of analytical quantification of the deterioration of photocatalyst dueto Figure 1.Schematic diagram of the continuous gas flow photoreactor system.Jan,Lin,Karthik,and BaiVolume 59October 2009Journal of the Air &Waste Management Association 1187the formation of nitric acid and to speed up the adsorp-tion breakthrough time,NO and acetone vapors were tested at relatively higher concentration levels in this study.The concentration of acetone was selected to be much higher than that of NO because the total concen-tration of volatile organic vapors in ambient air is usually much higher than that of the NO x .The source of NO gas was supplied from cylinder and diluted by a separate airstream.The concentration of acetone (VOC)vapors was controlled by passing carrier gas through an impinger containing acetone and the impinger was kept in a con-stant-temperature controller maintained at Ϫ10°C.The diluted air was controlled by a mass flow controller and passed into an impinger containing DI water to adjust the relative humidity (RH)to be approximately 55Ϯ5%in the outlet gas flow,which corresponds to a water vapor concentration of around 17,500ppmv under 25°C and 1atm.The level of RH used in this study was in the range of recommended levels by the American Society of Heating,Refrigerating and Air-Conditioning Engineers 28(30–60%)and by the Taiwan Indoor Air Association 29(40–70%).The desired flow of gas stream of NO,acetone,and water vapors was controlled by a mass flow controller and the gas stream was premixed by using a stainless steel mixer.The concentrations of the gas mixture were mea-sured before each experimental test to ensure the desired stable concentrations.The total flow rate of gas mixture was set at two different flow rates of 180and 500mL/min,which correspond to residence times of 75and 27sec,respectively.The photocatalytic decomposition reaction was carried out under UV irradiation with a 365-nm UV lamp (Sparkie UVA-S;10W)being used as a light source.The UV lamp was horizontally placed at the upper part of the reactor,and the photocatalyst-coated glass plate was horizontally fixed at the lower part of the reactor at a vertical distance of approximately 20cm from the UV lamp.UV intensity measured in all experiments was 2.5mW/cm 2as measured on the surface of the photocata-lysts.The inlet and outlet concentrations of NO and NO 2were continuously monitored by an online NO x (SIR Model S5012)analyzer,which monitors NO,NO 2,and NO x ,and then the selectivity of NO 2was calculated.The inlet and outlet concentrations of acetone samples were taken at designated time intervals during the experiment using a microsyringe,and the samples were analyzed by a gas chromatograph (GC;Model-SRI 8610)using a capil-lary column (30m)equipped with a flame-ionization detector (FID).RESULTS AND DISCUSSION X-Ray Diffraction and BET Analysis The crystalline nature of H-ZSM-5,TiO 2(ST-01),and TiO 2/H-ZSM-5composite materials was confirmed by X-ray diffraction (XRD)analysis and the results are depicted in Figure 2.It can be seen that the XRD pattern of TiO 2clearly indicates characteristic peaks of the anatase form of TiO 2crystals.30The major peaks that appeared in the 2range between 22°and 25°and 7°and 9°correspond to the specific peaks of H-ZSM-5zeolite.31As the content of H-ZSM-5zeolite is increased in the TiO 2/zeolite compos-ites,the gradual increase in the intensity of the zeolite peaks and the decrease in the intensity of the TiO 2peaks are clearly observed.To confirm the accuracy of the weight percentage mixing of the TiO 2/zeolite composites,the titanium con-tents of the TiO 2/H-ZSM-5composite materials were an-alyzed by ICP-MS,and the specific surface areas of H-ZSM-5,TiO 2,and TiO 2/H-ZSM-5composites were analyzed by nitrogen adsorption-desorption measure-ments.ICP-MS and BET results of the samples are pre-sented in Table 1.Because the surface area of H-ZSM-5zeolite (410m 2/g)is much higher than that of bulk TiO 2(82m 2/g),the specific surface area of the TiO 2/H-ZSM-5composites gradually decreased with increasing TiO 2loading.One can see that the surface area of the TiO 2/H-ZSM-5composites and the titanium content corre-sponded well to the weight percentage of thecomposites.Figure 2.XRD patterns of the bulk TiO 2,H-ZSM-5,and TiO 2/H-ZSM-5composite catalysts.Table 1.Physicochemical characterization of the photocatalytic sorbents.Photocatalytic SorbentCatalyst/Sorbent Content (wt%)ICP-MS Titanium Contents (wt%)Surface Area (m 2/g)TiO 2(ST-01)Zeolite (H-ZSM-5)H-ZSM-5–100–410TiO 2/H-ZSM-520809.42343TiO 2/H-ZSM-5406019.47292TiO 2/H-ZSM-5604030.24224TiO 2/H-ZSM-5802040.53158TiO 2100––82Jan,Lin,Karthik,and Bai1188Journal of the Air &Waste Management Association Volume 59October 2009Removal of NO and Acetone VaporsBlank tests on the removal of NO and acetone vapors were conducted first.The photochemical reaction was tested in the absence of catalyst and zeolite.The blank test results indicated that there was no photochemical reaction un-der UV irradiation in the absence of catalyst for NO and acetone vapors;hence,the results are not shown.Further-more,blank tests were also conducted on TiO2/zeolitecomposites in the absence of UV irradiation to evaluatethe acetone and NO removal via pure adsorption.The adsorption results indicated that there was no adsorption of NO on the surface of the TiO 2/zeolite composites,but the acetone vapors were predominately adsorbed on the surface of the catalysts.Figure 3a shows the acetone removal efficiency over H-ZSM-5,TiO 2,and 40and 60wt %TiO 2/H-ZSM-5com-posites as a function of operation time.It can be seen that the acetone removal efficiencies are in the order of H-ZSM-5zeolite Ͼ40wt %TiO 2/H-ZSM-5Ͼ60wt %TiO 2/H-ZSM-5ϾTiO 2.The higher acetone removal efficiency of H-ZSM-5zeolite as compared with that of TiO 2could be due to its higher BET surface area.This was confirmed bythe correlation between specific surface area of the mate-rial and the saturated adsorption capacity of acetone as shown in Figure 3b.It can be clearly seen that the adsorp-tion capacity of acetone is linearly correlated to the spe-cific surface area of the material.Adsorption and Photocatalytic Effects The adsorption and photocatalytic degradation for mix-ture of NO and acetone vapors were carried out in the continuous flow photoreactor system under UV irradia-tion at ambient temperature.Figure 4shows the NO re-moval over bulk TiO 2,H-ZSM-5,and TiO 2-supported ze-olite composites as a function of irradiation time.As can be expected,when no TiO 2was present,there was no photocatalytic reaction at all.As the weight percentage of TiO 2on the H-ZSM-5zeolite was increased to 20%(w/w),the initial NO removal rate was gradually increased with increasing irradiation time and it reached approximately 100%removal after 100min of irradiation time.On the other hand,at high TiO 2loading of 80wt %TiO 2/H-ZSM-5composite and bulk TiO 2catalyst,they showed quite high initial NO removal of approximately 100%up to 80min,then the NO removal decreased with increas-ing irradiation time.This could be ascribed to the deacti-vation of the catalyst by accumulation of unreactive by-products.The deactivation rate is much faster as the TiO 2content increases.As a result,the best TiO 2/zeolite com-posites appeared to be 40and 60wt %TiO 2/zeolite,the NO removal of which was near 100%for all irradiation time.The adsorption and PCO of acetone vapors from streams of NO and acetone mixture by H-ZSM-5,bulk TiO 2,and TiO 2/H-ZSM-5composites are depicted in Fig-ure 5.The acetone vapor removal by H-ZSM-5zeolite,which is expected to be due to its adsorption effect,was around 90%up to 60min and then decreased to 0%because of saturated adsorption.On the other hand,the removal efficiency of acetone over bulk TiO 2catalyst,Figure 3.(a)The acetone removal from streams of NO ϩacetone mixture as a function of operation time without UV irradiation under a flow residence time of 75sec.(b)The correlation between specific surface area of the material and the saturated adsorption capacity ofacetone.Figure 4.Effect of TiO 2content in the TiO 2/zeolite composites on the NO removal from streams of NO ϩacetone mixture under a flow residence time of 75sec.Jan,Lin,Karthik,and Bai Volume 59October 2009Journal of the Air &Waste Management Association 1189which is expected to be due to photocatalytic effect,was above 80%initially then gradually decreased to around 70%.For the TiO 2/zeolite composites,it showed that 20and 40wt %TiO 2-supported zeolites have less acetone removal efficiency as compared with those of 60and 80wt %TiO 2-supported zeolite and even bulk TiO 2catalyst.This could be because the TiO 2loading is not enough so that the ad-sorption process dominates and the photocatalytic reac-tion can proceed only to some extent.The results reveal that the optimal composite ratio seems to be 60–80wt %TiO 2/H-ZSM-5composites.Therefore it seems that com-bining a small amount of H-ZSM-5zeolite with the TiO 2photocatalyst can help to enhance acetone removal and prevent the deactivation of the photocatalysts.Effect of Residence Time on the Optimal TiO 2/Zeolite Composite RatioFigure 6shows the influence of residence time on removal of NO and acetone over TiO 2,H-ZSM-5,and TiO 2/H-ZSM-5composites.In this study,two residence times of 75and 27sec were chosen to evaluate the removal effi-ciency of the catalysts.When decreasing the residence time from 75to 27sec,the acetone removal was drasti-cally decreased over all catalysts.On the other hand,the removal of NO does not seem to be significantly affected by the residence time.It implies that the acetone mole-cules might first be adsorbed on the surface of the catalyst and then the photocatalytic decomposition of acetone takes place.But the NO molecule might be immediately photodecomposed into N 2or oxidized to NO 2.32,33The best TiO 2/zeolite composites appeared to be 20–60wt %TiO 2supported on H-ZSM-5zeolite for the removal of NO,and 80wt %TiO 2supported on H-ZSM-5zeolite for the removal of acetone vapors.For the removal of NO and acetone vapors,60wt %TiO 2/H-ZSM-5composite was found to be the most effective and optimal catalyst/ad-sorbent composite.Effect of NO on Acetone Removal Figure 7illustrates the removal of acetone in the presence and absence of NO in the gaseous stream using 60wt %TiO 2/H-ZSM-5composite at a flow residence time of 75sec.It was found that the PCO of acetone was dramati-cally enhanced in the presence of NO and the photocat-alytic activity was almost the same up to 240min of irradiation time.On the other hand,the acetone removal under the absence of NO was initially very high at 100%,but it then decreased drastically to around 60–65%after 60min.On the basis of the results,it is possible to propose that the formation of some intermediate species from NO oxidation could react immediately with acetone mole-cules.Therefore,the oxidation of acetone is strongly pro-moted by some intermediate species formed from NO.During the photocatalytic reaction,NO is generally con-tinuously oxidized to form NO 2,and then NO 2isfurther Figure 5.Effect of TiO 2content in the TiO 2/zeolite composites on the acetone removal from streams of NO ϩacetone mixture under a flow residence time of 75sec.Figure 6.Effect of flow residence time on NO and acetone removal from streams of NO ϩacetone mixture at an irradiation time of 240min.Figure 7.PCO of acetone in the presence and absence of NO over 60wt %TiO 2/H-ZSM-5composite.Jan,Lin,Karthik,and Bai1190Journal of the Air &Waste Management Association Volume 59October 2009converted into nitric acid (HNO 3)under PCO in the at-mosphere.The general reactions of NO oxidation by pho-tocatalysis are given in the following equations:H 2O ϩO 23OH ⅐ϩHO 2⅐(1)NO ϩHO 2⅐3NO 2ϩOH ⅐(2)NO 2ϩOH ⅐3HNO 3(3)Atkinson and co-workers 14–16demonstrated the rate con-stant and mechanism for the combination reaction of the OH radical with NO 2to form HNO 3in the tropo-sphere.They also calculated the rate constant for the gas-phase reactions of OH radical with acetone mole-cules with various temperature ranges.15The calculated room temperature rate constants for the reactions of OH radicals with acetone molecule and NO2is around 0.22ϫ10Ϫ12cm 3⅐molecule Ϫ1⅐sec Ϫ1and 1.42ϫ10Ϫ11cm 3⅐molecule Ϫ1⅐sec Ϫ1,respectively.14,34Furthermore,methods also exist for estimating rate constants for the reactions of VOCs with OH and NO x radicals,which can be used when data are not available.14–16Under the simultaneous presence of NO and acetone,the acetone could take up the OH radical formed in eq 2;hence,the acetone removal is enhanced.On the other hand,HNO 3is usually formed as a final byproduct.35This HNO3species is strongly adsorbed on the surface of thecatalyst,which causes catalyst deactivation and hence decreased photocatalytic activity with respect to irradia-tion time.13,33But if the OH radical is taken up by acetone,then the HNO 3formation of eq 3should be hindered.Effect of Acetone on NO RemovalTo further understand the mutual effect of NO and ace-tone,the experiment was also conducted over 60wt %TiO 2/H-ZSM-5composite in the presence and absence of acetone in the gas mixtures under UV irradiation.The effects of acetone on the NO removal and on the selec-tivity of NO 2are shown in Figure 8.It can be seen that thephotocatalytic decomposition of NO was significantly en-hanced in the presence of acetone.Thus,from Figures 7and 8it was found that the photocatalytic decomposition of acetone and NO was enhanced under the simultaneous presence of NO and acetone vapors.Similar results have also been identified by Higashimoto et al.36for the pho-tocatalytic decomposition of NO in the presence of pro-pane (C 3H 8)over VS-1zeolite used as a catalyst.The photocatalytic decomposition of NO in the ab-sence of acetone was found to be less efficient,as seen in Figure 8.This may be due to the rapid photooxidation of NO into NO 2and the active NO 2species reacting imme-diately with OH radical to form HNO 3,as shown in eq 3.Hence,the nitrate ions (NO 3Ϫ)from acid could be ad-sorbed on the surface active sites of the catalyst,which causes the catalyst deactivation.13,35On the other hand,the enhancement in NO removal in the presence of ace-tone could be expected from the rapid formation of OH radical that can be utilized for the simultaneous oxidation of NO and acetone.Therefore,the formation of HNO 3could be reduced with the co-existence of acetone and NO,and hence the photocatalytic decomposition of NO and acetone vapors could be maintained without any significant deactivation by HNO 3.As also observed in Figure 8,the selectivity of NO 2was increased with increasing irradiation time in the pres-ence and absence of acetone vapors.However,it is inter-esting to note that the selectivity of NO 2in the presence of acetone was lower than the selectivity of NO 2in the absence of acetone.Therefore eq 2may not be the only pathway for the further reaction of NO.It is possible that the NO reduction can also be favorable in addition to the NO oxidation mechanism.The formation of some inter-mediate organic radicals that reduced the NO x (NO and NO 2)into N 2and oxygen gas (O 2)because of the presence of hydrocarbons has been discussed by Higashimoto et al.36Therefore,oxidation and reduction of NO could oc-cur in the presence of acetone because acetone can act as a reducing agent in this system.However,because of instrument limitation,the NO reduction intermediates such as nitrous oxide (N 2O)and its final product,N 2,could not be detected at the present time.The confirma-tion of the NO oxidation/reduction mechanisms requires further study.On the other hand,the selectivity of NO 2was reached finally at approximately 100%in the absence of acetone.These results clearly indicate that the NO mole-cules were predominately oxidized into NO 2in the ab-sence of acetone.The generated NO 2may react immedi-ately with freely available OH radical to form HNO 3by eqs 2and 3;hence,the acid accumulation can cause the catalyst deactivation.To further confirm this,catalyst samples for the PCO of NO in the presence and absence of acetone were analyzed by FT-IR and the results are de-picted in Figure 9.It can be seen that the peaks appearing at 1385cm Ϫ1are due to the formation of nitrate species on the surface of the catalyst.11,35The FT-IR spectrum of the sample in the presence of NO and acetone clearly indicates that it has a less intense peak at 1385cm Ϫ1,which suggests less formation of HNO 3on the surface of the catalyst.On the other hand,when only NO was pre-sented in the gas stream,the increase in peak intensityat Figure 8.Removal of NO and the corresponding NO 2selectivity in the presence and absence of acetone over 60wt %TiO 2/H-ZSM-5composite.The flow residence time was 75sec.Jan,Lin,Karthik,and Bai Volume 59October 2009Journal of the Air &Waste Management Association 11911385cm Ϫ1indicates the formation of more HNO3on the surface of the catalyst.Thus the hypothesis that the co-existence of acetone and NO in the gaseous stream could diminish the acid formation is confirmed.CONCLUSIONSCombined effects of TiO 2catalyst/zeolite adsorbent com-posite was suggested as an effective photocatalytic sys-tem for the simultaneous removal of multiple pollutants in the ambient air under UV irradiation.The 60wt %TiO2/H-ZSM-5composite was found to be the optimalcomposite ratio for better removal efficiencies (Ն90%)of NO and acetone vapors than those of commercial TiO 2(ST-01)catalyst and zeolite (H-ZSM-5)adsorbent under humid conditions.It was found that the co-existence of acetone and NO in the gaseous stream could reduce the acid accumulation on the surface of the catalyst and enhance their removal as compared with their individual presence in the gas stream.The results on the selectivity of NO 2also indicated that the possibility of simultaneous NO oxidation/reduction mechanisms are present with the co-existence of NO and acetone in a humid environ-ment;however,further studies are required to confirm this hypothesis.ACKNOWLEDGMENTSThe authors gratefully acknowledge the financial support received from the National Science Council (NSC)of Tai-wan through research grant no.95-2221-E-009-112-MY3.M.Karthik is thankful for the postdoctoral research fel-lowship from NSC grant no.95-2221-E-009-112-MY3.REFERENCES1.Wang,S.;Ang,H.M.;Tade,M.O.Volatile Organic Compounds in Indoor Environment and Photocatalytic Oxidation:State of the Art;Environ.Int.2007,33,694-705.2.Namiesnik,J.;Gorecki,T.;Kozdronzabiegala,B.;Lukasiak,J.Indoor Air-Quality (IAQ),Pollutants,Their Sources and Concentration Levels;Build.Environ.1992,27,339-356.3.Ao,C.H.;Lee,bination Effect of Activated Carbon with TiO 2for the Photodegradation of Binary Pollutants at Typical Indoor Air Level;J.Photochem.Photobiol.A Chem.2004,161,131-140.4.Guillemot,M.;Mijoin,J.;Mignard,S.;Magnoux,P.Volatile Organic Compounds (VOCs)Removal over Dual Functional Adsorbent/Cata-lyst System;Appl.Catal.B Environ.2007,75,249-255.5.Blocki,S.W.Hydrophobic Zeolite Adsorption:a Proven Advancement in Solvent Separation Technology;Environ.Prog.1993,12,226-230.6.Fujishima,A.;Rao,T.N.;Tryk,D.A.Titanium Dioxide Photocatalysis;J.Photochem.Photobiol.C Photochem.Rev.2000,1,1-21.7.Kitano,M.;Matsuoka,M.;Ueshima,M.;Anpo,M.Recent Develop-ments in Titanium Oxide-Based Photocatalysts;Appl.Catal.A Gen.2007,325,1-14.8.Coronado,J.M.;Kataoka,S.;Tejedor,I.T.;Anderson,M.A.Dynamic Phenomena during the Photocatalytic Oxidation of Ethanol and Ac-etone over Nanocrystalline TiO 2:Simultaneous FT-IR Analysis of Gas and Surface Species;J.Catal.2003,219,219-230.9.Deng,X.;Yue,Y.;Gao,Z.Gas-Phase Photo-Oxidation of Organic Compounds over Nanosized TiO 2Photocatalysts by Various Prepara-tion;Appl.Catal.B Environ.2002,39,135-147.10.Augugliaro,V.;Coluccia,S.;Loddo,V.;Marchese,L.;Martra,G.;Pal-misano,L.;Schiavello,M.Photocatalytic Oxidation of Gaseous Tolu-ene on Anatase TiO 2Catalyst:Mechanistic Aspects and FT-IR Investi-gation;Appl.Catal.B Environ.1999,20,15-27.11.Lim,T.H.;Jeong,S.M.;Kim,S.D.;Gyenis,J.Photocatalytic Decompo-sition of NO by TiO 2Particles;J.Photochem.Photobiol.A Chem.2000,134,209-217.12.Zhang,J.;Ayusawa,T.;Minagawa,M.;Kinugawa,K.;Yamashita,H.;Matsuoka,M.;Anpo,M.Investigations of TiO 2Photocatalysts for the Decomposition of NO in the Flow System:the Role of Pretreatment and Reaction Conditions in the Photocatalytic Efficiency;J.Catal.2001,198,1-8.13.Tseng,Y.H.;Kuo,C.-S.;Huang;C.-H.;Li,Y.-Y.;Chou,P.-W.;Cheng,C.-L.;Wong,M.-S.Visible-Light-Responsive Nano-TiO 2with Mixed Crystal Lattice and Its Photocatalytic Activity;Nanotechnology 2006,17,2490-2497.14.Atkinson,R.Atmospheric Chemistry of VOCs and NO x ;Atmos.Envi-ron.2000,34,2063-2101.15.Kwok,E.S.C.;Atkinson,R.Estimation of Hydroxyl Radical Reaction Rate Constants for Gas-Phase Organic Compounds Using a Structure-Reactivity Relationship:an Update;Atmos.Environ.1995,29,1685-1695.16.Atkinson,R.Gas Phase Tropospheric Chemistry of Volatile Organic Compounds:1.Alkanes and Alkenes,J.Phys.Chem.Ref.Data 1997,26,215-290.17.Ao,C.H.;Lee,S.C.Enhancement Effect of TiO 2Immobilized on Acti-vated Carbon Filter for the Photodegradation of Pollutants at Typical Indoor Air Level;Appl.Catal.B Environ.2003,44,191-205.18.Ao,C.H.;Lee,S.C.;Yu,J.Z.;Xu,J.H.Photodegradation of Formalde-hyde by Photocatalyst TiO 2:Effects on the Presences of NO,SO 2and VOCs;Appl.Catal.B Environ.2004,54,41-50.19.Ao,C.H.;Lee,S.C.;Mak,C.L.;Chan,L.Y.Photodegradation of Volatile Organic Compounds (VOCs)and NO for Indoor Air Purification Using TiO 2:Promotion Versus Inhibition Effect of NO;Appl.Catal.B Environ.2003,42,119-129.20.Yu,H.;Lee,S.C.;Yu,J.;Ao,C.H.Photocatalytic Activity of Dispersed TiO 2Particles Deposited on Glass Fibers;J.Mol.Catal.A Chem.2006,246,206-211.21.Tao,Y.;Wu,C.-Y.;Mazyck,D.W.Removal of Methanol from Pulp and Paper Mills Using Combined Activated Carbon Adsorption and Pho-tocatalytic Regeneration;Chemosphere 2006,65,35-42.22.Tao,Y.;Schwartz,S.;Wu,C.-Y.;Mazyck,D.W.Development of a TiO 2/AC Composite Photocatalyst by Dry Impregnation for the Treat-ment of Methanol in Humid Airstreams;Ind.Eng.Chem.Res.2005,44,7366-7372.23.Thevenet,F.;Guaitella,O.;Herrmann,J.M.;Rousseau,A.;Guillard,C.Photocatalytic Degradation of Acetylene over Various Titanium Diox-ide-Based Photocatalysts;Appl.Catal.B Environ.2005,61,58-68.24.Yamashita,H.;Ichihashi,Y.;Anpo,M.;Hashimoto,M.Louis,C.M.Photocatalytic Decomposition of NO at 275K on Titanium Oxides Included within Y-Zeolite Cavities:the Structure and Role of the Active Sites;J.Phys.Chem.1996,100,16041-16044.25.Hu,Y.;Rakhmawaty,D.;Matsuoka,M.;Takeuchi,M.;Anpo,M.Syn-thesis,Characterization and Photocatalytic Reactivity of Ti-Contain-ing Micro-and Mesoporous Materials;J.Porous Mat.2006,13,335-340.26.Ao,C.H.;Lee,S.C.;Zou,S.C.;Mak,C.L.Inhibition Effect of SO 2on NO x and VOCs during the Photodegradation of Synchronous Indoor Air Pollutants at Parts per Billion (ppb)Level by TiO 2;Appl.Catal.B Environ.2004,49,187-193.27.Chan,C.C.;Ozkaynak,H.;Spengler,J.D.;Sheldon,L.Driver Exposure to Volatile Organic Compounds,Carbon Monoxide,Ozone and Ni-trogen Dioxide under Different Driving Conditions;Environ.Sci.Tech-nol.1991,25,964-972.28.American Society of Heating,Refrigerating,and Air-Conditioning En-gineers;available at /education/page/1481(ac-cessed March 13,2009).Figure 9.FT-IR spectra of 60wt %TiO 2/H-ZSM-5composite catalyst before and after photocatalytic reaction.Jan,Lin,Karthik,and Bai1192Journal of the Air &Waste Management Association Volume 59October 2009。