6-87962-4中文资料

Declaration of Compliancefor articles made of ceramic and metal intended to come into contact with food20.02.2019Hereby we confirm that our product:Item name: Sicomatic classic 6,5lAnthrazit w.insertItem No.: 8917.5907.11 / CMMF No.: 0,000complies with the legal regulations laid down in the German Commodity Ordinance,the Regulation (EC)No 1935/2004,in particular Article 3,11(5),15and 17,and the Regulation (EC)No 2023/2006,in their relevant versions.When used as specified,the transition of substances does not exceed the legal limits and the SRLs (Specific Release Limits)according to Council of Europe Resolution CM/Res(2013)9on metals and alloys used in food contact materials and articles (effective 2013–1st Edition).The tests are performed according to the Directive 84/500/EEC,last amended by 2005/31/EC,respectively according to the …Technical guide on metals and alloys used in food contact materials and articles “.Specification of the intended use or limitations:- Type(s) of food intended to come into contact with the material:- Intended duration and temperature of treatment and storage while in contact with the food:- Ratio of the area of the food contact surface to the volume used to determine the compliance of the food contact material or article made from metal:This declaration is valid for the product delivered by us as specified above.Under consideration of the food contact conditions stated,the product complies with the stipulations of these Directives regarding the specified foods.The user shall verify himself that the product is suitable for the intended food beyond the stipulations of the Directives.The validity of the declaration is ending if the requirements are changed.This document was created electronically and is valid without signature.Name of the document: L01_8917.5907.11_EN_20190220_Sicomatic classic 6,5lAnthrazit w.insert_kl.pdf Pot made of special steel with ceramic coating, with chromed rim, lid made of stainless steel 18/10, Inner side of the lid: Components made of stainless steel 18/10 and silicone, lid gasket made of silicone. insert and insert support made of stainless steel, handles made of black Duroplast Item No.21.2029.2081Description (material/optics)/ analogue items :repeated contact, cooking under increased pressure/ temperature3,6 dm²/ Lall types of food (aqueous, acidic, fatty)WMF Group - a Groupe SEB company WMF Group GmbHVORSITZENDER DES AUFSICHTSRATES SITZ DER GESELLSCHAFT BANKVERBINDUNG Eberhardstraße 35Bertrand Neuschwander Geislingen | Steige Commerzbank AG Göppingen 73312 Geislingen | SteigeRECHTSFORM IBAN DE06 6104 0014 0160 3000 00GermanyGESCHÄFTSFÜHRER Gesellschaft mit beschränkter Haftung BIC COBADEFFXXX Dr. Volker Lixfeld | VORSITZENDER REGISTERGERICHT telefon+49 7331 25 1Bernd Stoeppel Amtsgericht Ulm HRB 732253fax+49 7331 45 387 WEEE-Reg.-Nr. DE 78426351 USt.-ID.-Nr. DE 298 927 552email****************** St.-Nr. 62050|01224web GLN 4000530 00000 2。

第一部分化学品及企业标识化学品中文名：六氟丁醇化学品英文名：2,2,3,4,4,4-hexafluorobutan-1-olCAS No.：382-31-0分子式：C4H4F6O产品推荐及限制用途：工业及科研用途。

第二部分危险性概述紧急情况概述吞咽有害。

造成皮肤刺激。

造成严重眼刺激。

吸入有害。

可引起呼吸道刺激。

GHS危险性类别急性经口毒性类别 4皮肤腐蚀 / 刺激类别 2严重眼损伤 / 眼刺激类别 2急性吸入毒性类别 4特异性靶器官毒性一次接触类别 3标签要素：象形图：警示词：警告危险性说明：H302 吞咽有害H315 造成皮肤刺激H319 造成严重眼刺激H332 吸入有害H335 可引起呼吸道刺激●预防措施：—— P264 作业后彻底清洗。

—— P270 使用本产品时不要进食、饮水或吸烟。

—— P280 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

—— P261 避免吸入粉尘/烟/气体/烟雾/蒸气/喷雾。

—— P271 只能在室外或通风良好处使用。

●事故响应：—— P301+P312 如误吞咽：如感觉不适，呼叫解毒中心/ 医生—— P330 漱口。

—— P302+P352 如皮肤沾染：用水充分清洗。

—— P332+P313 如发生皮肤刺激：求医/就诊。

—— P362+P364 脱掉沾染的衣服，清洗后方可重新使用—— P305+P351+P338 如进入眼睛：用水小心冲洗几分钟。

如戴隐形眼镜并可方便地取出，取出隐形眼镜。

继续冲洗。

—— P337+P313 如仍觉眼刺激：求医/就诊。

—— P304+P340 如误吸入：将人转移到空气新鲜处，保持呼吸舒适体位。

—— P312 如感觉不适，呼叫解毒中心/医生●安全储存：—— P403+P233 存放在通风良好的地方。

保持容器密闭。

—— P405 存放处须加锁。

●废弃处置：—— P501 按当地法规处置内装物/容器。

物理和化学危险：无资料。

健康危害：吞咽有害。

Anderson Power Products®HEADQUARTERS: 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700EUROPE: Rathealy Road, Fermoy Co. Cork, Ireland T:353-(0)25-32277 F:353-(0)25-32296ASIA/PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:852-2636-0836 F:852-2635-9036CHINA: IDEAL Anderson T echnologies (Shenzhen) Ltd., Block A8 T antou W. Ind. Par, Songgang Baoan District, Shenzhen, PR. China 51810 T: 86-755-2768-2118 F: 86-755-2768-2218TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: 886-4-2310-6451 F:886-4-2310-6460SB ®175ConnectorPRODUCT SPECIFICATIONSThe innovative SB ® connectors provide cost-effective reliability, design flexibility and safety for your products' manufacture, installation and maintenance.APP's 2 & 3 pole connectors are availablewith a 175 amp rating, 600 Volts continuousAC or DC operation. There are SB ®connectors for many applications and wire sizes, #4 to 1/0 AWG (21.1 to 53.5mm²). Mechanical keys ensure connectors will only mate with connectors of the same color. Different color housings are selected to identify voltages, thus preventingmismatching of the power supply system.11111111116325G6 Gray #4 21.16326G6 Blue #4 21.16327G6 Orange #4 21.16328G6 Yellow #4 21.16329G6 Red #4 21.1111382 Individual 1/0 53.5947 Contact set (2) #2 33.61383 Individual #2 33.6948 Contact set (2) #4 21.11384 Individual #4 21.2948G 1* Contact set (2) #6 13.31348* Individual #6 13.3944G 1Contact set (2) #142.41347 Individual #1 42.4180BBS Bus bar contact N/A N/AFEATURES• Mechanical keyed housingsPrevents accidental mating of componentsoperating at different voltage levels • Flat wiping contact systemAllows for minimal contact resistance at high current, wiping action cleans contact surface during disconnection• Genderless designMakes assembly quick and easy and reduces number of parts stocked11* Thin wallNote: For additional colors please contact customer serviceAnderson Power Products®HEADQUARTERS: 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700EUROPE: Rathealy Road, Fermoy Co. Cork, Ireland T:353-(0)25-32277 F:353-(0)25-32296ASIA/PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:852-2636-0836 F:852-2635-9036CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 T antou W. Ind. Par, Songgang Baoan District, Shenzhen, PR. China 51810 T : 86-755-2768-2118 F: 86-755-2768-2218TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: 886-4-2310-6451 F:886-4-2310-6460SB ®175 ConnectorORDERING INFORMATION & DIMENSIONSTEMPERATURE RISE CHARTAccessoriesPartNumber Description 995G1 Handle, hardware & lock washers - Gray 995G3 Handle, hardware & lock washers - Red 923 Manual release, locking half with clamps and hardware 924 Manual release, mounting half with clamps and hardware110G56 Lock nut for use with Bus bar contact SB175-lockout Safety lockout 111197G1 Charger key 134G2 Dust cover945 Cable clamps 945G3 Cable clamps-2 single conductor with hardware. Use with "A" frame only.946G1 Cable clamps-1 twin conductor with hardware. Use with "A" frame only.BushingsPart WireNumber Description AWG sq. mm 5648 Use with 944 1/0 to #10 53.5 to 5.15663 Use with 944 1/0 to #6 53.5 to 13.35687 Use with 944 1/0 to #1 53.5 to 42.45690 Use with 944 1/0 to #2 53.5 to 33.65693Use with 944 1/0 to #4 53.5 to 21.2ToolingPartNumber Description 1368 Hand tool for 1/0 to #1 (53.5/42.4)1387G 1Pneumatic tool1388G3 - die for 1/0 to #1 (53.5/42.4)1388G5 - die for #41389G5 - locator for #41389G3 - locator for 1/0 to #1 (53.5/42.4)1303G4 - die for 1/0 to #4 (53.5/21.1)1304G4- locator for 1/0 to #4 (53.5/21.1)020*******800100012000.528321285122048SB175Pulse Current CapabilityDuration of Current (seconds)A m p e r e s01020304040801201602001/01 AWG 2 AWG 4 AWGSB175Temperature Rise at Constant CurrentAmperes AppliedT e m p e r a t u r e (°C)1/01 AWG 2 AWG 4 AWGContactsPart -A--B- -C- -D- Bus Bar LayoutPart - J - - K - - L- - M -Number mm in. mm in. mm in. mm in.180BBS26.8 1.05 26.8(min) 1.05(min) 9.53 0.375 3.43 0.135Mounting DimensionsHousingBus Bar Mounting TablePart - E - - F - Number mm in. mm in. 180BBS88.9 3.50 10.2 0.40Part - J -Number mm in.[53.1]2.09[25.4]1.0DS-SB175 REV05。

2,4-二甲基苯胺和2,6-二甲基苯胺产品简介一、产品介绍1、2,4-二甲基苯胺产品英文名2,4-Dimethylaniline;2,4-Xylidine分子式(CH3)2C6H3NH2产品用途染料中间体，可制备乳胶成色剂，亦可用于有机合成及药物制造。

毒性防护高毒。

通过吞咽、吸入蒸气或经皮肤吸收而引起中毒，其中毒类似于苯胺的血液中毒，生成高铁血红蛋白，造成对组织供氧不足。

家兔经口LD50为620mg/kg，空气中最高容许浓度5mg/m3。

防护方法参照“苯胺”。

包装储运采用铁桶密封包装，贮存于阴凉、通风处。

物化性质无色油状液体。

在光和空气中颜色变深。

相对密度0.9723(40/4℃)。

沸点214℃。

熔点-14.3℃。

折射率nD(20℃)1.5569。

能与空气一同挥发。

易燃。

微溶于水，溶于乙醇、乙醚、苯及酸溶液。

2、2,6-二甲基苯胺英文名称：2,6-Dimethylaniline分子式:C8H11N产品用途：是农药、医药及兽药的中间体。

外观和性状：无色油状液体，在光照和空气中颜色会变深，能与空气一同挥发，遇明火燃烧，高热分解，与氧化剂反应，有毒。

微溶于水，溶于乙醇，乙醚，苯及酸溶液。

包装：采用铁桶密封包装，每桶净重200kg，储存于阴凉通风处。

二、生产工艺利用2，4-二甲基硝基苯和2，6-二甲基硝基苯加氢制得2,4-二甲基苯胺和2,6-二甲基苯胺。

或利用间二甲基苯进行硝化、分离、加氢还原制得2,4-二甲基苯胺和2,6-二甲基苯胺。

硝化制2，4-二甲基硝基苯和2，6-二甲基硝基苯按一定的比例，前者多后者少。

三、原料市场专门生产2，4-二甲基硝基苯和2，6-二甲基硝基苯的厂家较少，大部分厂家主要生产2,4-二甲基苯胺和2,6-二甲基苯胺。

当前原料市场价格：2，4-二甲基硝基苯约16000元/四、生产厂家五、市场状况2，4-二甲基苯胺主要用于生产单甲脒、双甲脒、2，4-二甲基乙酰基乙酰苯胺、3，5-二甲基苯胺、杀螨咪、荧光黄FGP、耐晒黄GP等。

化学品安全技术说明书4,6-二硝基邻甲苯酚第一部分化学品及企业标识化学品中文名：4,6-二硝基邻甲苯酚化学品英文名：2,4-dinitro-o-cresol；4,6-dinitro-o-cresol供应商名称：天津****化工有限公司供应商地址：天津市**区**路**号**室供应商电话：4571-5858****邮编：248***供应商传真：4571-5858****电子邮件地址：4527**************产品推荐及限制用途：用作果树杀虫剂、除草剂。

第二部分危险性概述紧急情况概述：吞咽致命，皮肤接触会致命，吸入致命，造成皮肤刺激，造成严重眼损伤，可能导致皮肤过敏反应，怀疑可造成遗传性缺陷，对水生生物毒性非常大并具有长期持续影响。

GHS危险性类别：急性毒性-经口-类别2;急性毒性-吸入-类别2;皮肤腐蚀/刺激-类别2;严重眼损伤/眼刺激-类别1;皮肤致敏物-类别1;生殖细胞致突变性-类别2;危害水生环境-急性危害-类别1;危害水生环境-长期危害-类别1标签要素：象形图：警示词：危险危险信息：H300:吞咽致命H330:吸入致命H315:造成皮肤刺激H318:造成严重眼损伤H317:可能导致皮肤过敏反应H341:怀疑可造成遗传性缺陷（如果最终证明没有其他接触途径会产生这一危害时，应说明其接触途径）H410:对水生生物毒性极大并具有长期持续影响防范说明：预防措施：P264:作业后彻底清洗……。

P270:使用本产品时不要进食、饮水或吸烟。

P260:不要吸入粉尘/烟/气体/烟雾/蒸气/喷雾。

P271:只能在室外或通风良好之处使用。

P284:戴呼吸防护装置。

P280:戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

P261:避免吸入粉尘/烟/气体/烟雾/蒸气/喷雾。

P272:受沾染的工作服不得带出工作场地。

P201:使用前获特别指示。

P202:在明白所有安全防范措施之前请勿搬动。

P273:避免释放到环境中。

FEATURES AND SPECIFICATIONS2.00 by 2.25mm (.079 by .089") Pitch 5-Row, 6-Row and 8-Row VHDM-HSD ™Module-to-BackplaneConnector SystemFeatures and Benefitss Up to 5.0 Gbps bandwidth per signal pair enables state-of-the-art system design and performance s2.00 by 2.25mm (.079 by .089”) pitch provides real signal density of 10 differential pairs for 5-row and 6-row and 15 differential pairs for 8-row per centimeter (25 and 38 pairs respectively per inch) sMinimum distance between daughtercards:– 5-row system offers 15.00mm (.591")– 6-row system offers 18.00mm (.709")– 8-row system offers 22.00mm (.866")sGround planes between signal columns provide tightly controlled impedance for rise times down to 50 picoseconds (10-90%). This ensures very low cross talk between signals within and between columnssGround pins are in the same grid as signal pins, allowing wider channels for PCB routing and traces up to 0.25mm (.010”) wides6-row or 8-row VHDM-HSD wafers can be applied to the same stiffener as standard VHDM ® 6-row or 8-row wafers. The combination of VHDM and VHDM-HSD wafers, grouped together in the same stiffener, provides cost effective solutions to different performance parametersThe Very High Density Metric High Speed Differential (VHDM-HSD) connector system has been expanded to include 5-row, 6-row and 8-row daughtercard and backplane modules. VHDM-HSD is designed for differential-pair architecture applications that require very high interconnect density and signal integrity in a single-ended configuration.The same great modularity features and components ofVHDM are provided in the VHDM-HSD. The 5-row and 6-row systems feature 2 signal pairs per column and the8-row system features 3 signal pairs per column inincrements of 10 and 25 columns. All circuits areutilized as signal circuits without the need to use some asground circuits.The daughtercard connector consists of a metal stiffener just as with the VHDM system. The system combines the signal wafers, power modules and guidance modules into one continuous connector that can be ordered as a single specific part number. The card pitch of the VHDM-HSD 8-row system is the same as the standard VHDM 8-row system, allowing both signal wafer types for single ended and differential pair to be used together. Thismodularity and design flexibility allow engineers toincorporate both connector systems on the sameplatforms. The system is based on a 2.00mm (.079")pitch and includes vertical and right angle products thatcan be configured up to 2000 circuits. The maximumlength of a daughtercard connector on a single stiffeneris 300mm (12").The backplane connectors feature headers with open ends for continuous side-to-side stacking and headers with guide pins and polarizing keys on either end to aid in proper alignment of the mating daughtercard. The power modules occupy just a small width and hold sequentially matable pins that each manage 10.0 amps of current.Molex offers application tooling for pressing VHDM-HSD connectors into PCBs as separate modules or as complete assemblies. VHDM-HSD cable assemblies are also available for connecting backplane headers to high-performance cables.Note: VHDM and VHDM-HSD are trademarks or registered trademarks of Teradyne,Inc.元器件交易网FEATURES AND SPECIFICATIONS2.00 by 2.25mm (.079 by .089") Pitch 5-Row, 6-Row and 8-Row VHDM-HSD ™Module-to-Backplane Connector SystemPress Fit Right Angle ReceptacleApplicationsThe VHDM-HSD products are used in very high speed, short rise-time, high circuit count applications connecting daughtercards to the backplane:s Network Switches s Routerss Computer Serverss Telecommunication Equipment sInternetworking DevicesORDERING INFORMATIONDaughtercard AssemblyConfiguration 5-Row 6-Row 8-Row Signal wafers, power modules and guide modules sequentiallyassigned by application VHDM-HSD wafers74670-XXXX 74880-XXXX 74680-XXXX Combination of VHDM and VHDM-HSD wafers74686-XXXX 74886-XXXX74686-XXXXBackplane Header Signal Module Standard Loaded Pin Height 0.76µm (30µ”) Gold5-Row6-Row8-Row10-Column 25-Column 10-Column 25-Column 10-Column 25-Column Open Ended4.25mm (.167”)74695-100374695-250374979-100374979-250374649-100374649-25034.75mm (.187”)74695-100174695-250174979-100174979-250174649-100174649-25015.15mm (.203”)74695-100474695-250474979-100474979-250474649-100474649-25046.25mm (.266”)74695-100274695-250274979-100274979-250274649-100274649-2502Left Guide PinNo Polarizing Key 4.25mm (.167”)74696-100374696-2503––74650-100374650-25034.75mm (.187”)74696-100174696-2501––74650-100174650-25015.15mm (.203”)74696-100474696-2504––74650-100474650-25046.25mm (.266”)74696-100274696-2502––74650-100274650-2502Left Guide Pin“A” Polarizing Key 4.25mm (.167”)74696-101374696-2513––74650-101374650-25134.75mm (.187”)74696-101174696-2511––74650-101174650-25115.15mm (.203”)74696-101474696-2514––74650-101474650-25146.25mm (.266”)74696-101274696-2512––74650-101274650-2512Right Guide PinNo Polarizing Key 4.25mm (.167”)74697-100374697-2503––74651-100374651-25034.75mm (.187”)74697-100174697-2501––74651-100174651-25015.15mm (.203”)74697-100474697-2504––74651-100474651-25046.25mm (.266”)74697-100274697-2502––74651-100274651-2502Right Guide Pin“A” Polarizing Key 4.25mm (.167”)74697-101374697-2513––74651-101374651-25134.75mm (.187”)74697-101174697-2511––74651-101174651-25115.15mm (.203”)74697-101474697-2514––74651-101474651-25146.25mm (.266”)74697-101274697-2512––74651-101274651-2512Backplane Power and Guide Components5-Row and 6-Row 8-Row Power Module 74029-600074029-8000Keying Post 74069-001074069-0010Guide Pin74076-0001/000274076-0001/0002Americas Headquarters Lisle, Illinois 60532 U.S.A.1-800-78MOLEX amerinfo@ Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324feninfo@ Far East South Headquarters Jurong, Singapore 65-6-268-6868fesinfo@ European Headquarters Munich, Germany 49-89-413092-0eurinfo@ Corporate Headquarters 2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Visit our Web site at /product/backplan/hsd.htmlOrder No. USA-158 Rev. 2Printed in USA/2.5K/JI/JI/2003.03©2003, MolexNote: VHDM and VHDM-HSD are trademarks or registered trademarks of Teradyne,Inc.元器件交易网。

两用物项和技术进出口许可证管理目录说明：一、本目录分为《两用物项和技术进口许可证管理目录》与《两用物项和技术出口许可证管理目录》。

二、本目录所列物项和技术是指《中华人民共和国核出口管制条例》、《中华人民共和国核两用品及相关技术出口管制条例》、《中华人民共和国导弹及相关物项和技术出口管制条例》、《中华人民共和国生物两用品及相关设备和技术出口管制条例》、《中华人民共和国监控化学品管理条例》、《中华人民共和国易制毒化学品管理条例》、《中华人民共和国放射性同位素与射线装置安全和防护条例》和国务院批准的《有关化学品及相关设备和技术出口管制办法》等相关行政法规、规章所附清单和名录以及国家依据相关法律、行政法规和规章予以管制、临时管制或特别管制的物项和技术。

三、进出口本目录的物项和技术，不论该物项和技术是否在本目录中列明海关商品编号，均应依法办理两用物项和技术进出口许可证。

四、本目录所列物项和技术及其商品名称和描述与相关法律、行政法规和规章规定不一致时，以相关法律、行政法规和规章规定为准。

- 1 - / 135Ⅰ、两用物项和技术进口许可证管理目录- 3 - / 135- 5 - / 135- 7 - / 135三、放射性同位素注释：豁免的放射性同位素及其化合物除外Ⅱ、两用物项和技术出口许可证管理目录一、核出口管制清单所列物项和技术- 9 - / 135（二）核反应堆及为其专门设计的设备和部件- 11 - / 135- 13 - / 135（三）核反应堆用非核材料（四）辐照元件后处理厂以及为其专门设计或制造的设备- 15 - / 135（五）用于制造核反应堆燃料元件的工厂和为其专门设计或制造的设备- 17 - / 135（六）天然铀、贫化铀或特种可裂变材料同位素分离厂以及为其专门设计或制造的（除分析注释：离心机转动构件所用材料是:（a）极限抗拉强度为1.95×109N/m2或更高的马氏体钢；（b）极限抗拉强度为0.46×109N/m2或更高的铝合金；- 19 - / 135（c）适合于复合结构用的纤维材料，其比模量应为3.18×106m或更高，比极限抗拉强度应为7.62×104m或更高。