page 1 / 3 Digital Clamp Meter
CMP-1006
index:
WMXXCMP1006
Measurement functions
•INRUSH function for measuring current drawn by an elec-
trical device when first turned on
•AC and DC current measurement up to 1000 A
•True RMS AC voltage and current measurement for accu-
rate and reliable readings of non-sinusoidal signals
•AC and DC voltage measurement up to 600 V
•resistance measurement up to 66 MΩ
•continuity test with acoustic signalling (beeper) for resist-
ance below 40 Ω
•temperature measurement (Fahrenheit and Celsius)
•frequency measurement
•duty cycle measurement
•diode testAdvanced measurements
by using the CMP-1006
Digital Clamp Meter
Overview
Sonel CMP-1006 Clamp Meter is designed to work in difficult
measuring conditions. A special housing, covered with an
elastomer coating, provides protection against drops and me-
上海岭通电子科技有限公司 2004-2009版权所有 用户文档 卫星钟校时测试软件 GpsClock3 使用说明书 版本1.1 发布日期 - November 25, 2009 GpsClock3 软件使用说明 修订版本 1.0
上海岭通电子科技有限公司 2004-2009版权所有 第 2 页共 13页 目录 目录 .................................................................................................................................................. 2 1 简介........................................................................................................................................... 3 2 安装........................................................................................................................................... 3 3 启动GpsClock3 ........................................................................................................................ 3 3.1 程序验证....................................................................................................................... 4 4 运行模式设置........................................................................................................................... 4 4.1 本地计算机作为一级时间服务器 ............................................................................... 5 4.2 本地计算机作为时间客户端 ....................................................................................... 5 5 作为NTP时间服务器运行 ..................................................................................................... 5 6 作为时间客户端运行............................................................................................................... 6 6.1 通讯接口选择............................................................................................................... 6 6.2 数据接收指示............................................................................................................... 6 6.3 校准本地计算机时间................................................................................................... 6 6.4 时间显示....................................................................................................................... 7 6.5 卫星钟双网络模块/双本地计算机网口的网络冗余实现 .......................................... 7 7 卫星钟设备远程配置（网络模块） ....................................................................................... 8 7.1 修改IP地址 ................................................................................................................. 8 7.2 工作模式选择............................................................................................................. 10 8 常见问题................................................................................................................................. 10 8.1 网络模块相关问题..................................................................................................... 10 8.1.1 “Internet 时间”选项卡设置......................................................................... 10 8.1.2 “no route to host”错误 .................................................................................... 12 8.1.3 “Address in use，……” .................................................................................. 12 8.1.4 Run-time error'429': ........................................................................................ 13 GpsClock3 软件使用说明 修订版本 1.0
雷泰红外说明书(总16页)
-CAL-FENGHAI.-(YICAI)-Company One1
-CAL-本页仅作为文档封面，使用请直接删除 技术参数
测温范围 MR1SASF 600℃~1400℃
MR1SBSF 700℃~1800℃
MR1SCSF 1000℃~3000℃
探测器 硅/硅层探测器，通常1.0μm
精度 满量程的±0.75%
重复精度 ±0.3%，满量程
温度分辨率 1℃或℉
响应时间 10ms
发射率(单色) 0.10-1.0，步长0.01
坡度(双色) 0.85-1.15，步长0.001
信号处理 峰值保持和平均值
光学参数
型号 D:S * 焦距
MR1SASF 44：1 600mm(24in)~?∞
MR1SBSF 82：1 600mm(24in)~?∞
MR1SCSF 130：1 600mm(24in)~?∞
MR1SACF 44：1 300~600mm(12~24in)
MR1SBCF 82：1 300~600mm(12~24in)
MR1SCCF 130：1 300~600mm(12~24in)
* 95%能量时，CF=近焦，SF=标准焦距
最小焦距时的最小光点尺寸
型号 最小的光点尺寸直径 最小的光点直径
MR1SASF 44：1 14mm(0.55in)@600mm(24in)
MR1SBSF 82：1 7.3mm(0.55in)@600mm(24in)
MR1SCSF 130：1 4.6mm(0.55in)@600mm(24in)
MR1SACF 44：1 7.0mm(0.55in)@600mm(12in)
MR1SBCF 82：1 3.7mm(0.55in)@600mm(12in)
MR1SCCF 130：1 2.3mm(0.55in)@600mm(12in)
* 最小的光点尺寸直径=最小焦距/最小的D:S
一般参数
环境标准 NEMA-4(IEC529，IP65)
Manufacturer Information
for users regarding software updates (following the NAMUR recommendation 53)
MI01255K/09/EN/01.14 1 Type of device
Field device / signal processing device Monitoring- / operation system / hand held terminal etc. Modem / interface Manufacturer : Endress+Hauser
Device : Process indicator / transmitter
Type : RIA45, RIA46, RMA42
Previous software version : 1.02.zz
How can the previous software version number be identified:
Display of current firmware version at device start-up, nameplate, parameter in configuration software, parameter in local set-up 2 Firmware/Software
New firm-/software version : 1.03.zz
Description of the modification in comparison with the predecessor version: New parameter "Failure delay" to delay error messages; parameter is only visible if Signal range=4-20mA or 1-5V and Namur NE43=on is set. 3 Compatibility Is the newly installed firmware/software compatible with the operating tools?
