MAX6321HPUK33BZ-T中文资料

HP 瘦客户机©Copyright 2018 HP Development Company, L.P.Windows 是 Microsoft Corporation 在美国和/或其他国家/地区的注册商标或商标。

本文档中包含的信息如有更改，恕不另行通知。

HP 产品和服务附带的明示保修声明中阐明了此类产品和服务的全部保修服务。

本文档中的任何内容均不构成任何额外保证。

HP 对本文档中出现的技术错误、编辑错误或遗漏之处不承担任何责任。

第一版：2018 年 5 月文档部件号：L18409-AA1产品通告本用户指南介绍大多数机型的常见功能。

您的笔记本计算机上可能未提供某些功能。

并非所有功能在所有 Windows 版本中都可用。

系统可能需要升级和/或单独购买硬件、驱动程序或 BIOS 更新，以充分利用 Windows 功能。

Windows 10 会自动更新，此功能始终处于启用状态。

可能会收取 ISP 费用，在更新过程中可能还会有其他要求。

请参阅。

要获取最新版本的用户指南，请访问/support，然后按照说明查找您的产品。

然后选择用户指南。

软件条款如果安装、复制、下载或以其他方式使用此计算机上预安装的任何软件产品，即表明您同意受 HP 最终用户许可协议(EULA) 条款的约束。

如果您不接受这些许可协议条款，只需将未使用的产品（包括硬件和软件）在 14 天内完整地退回给您的经销商，并依据其退款政策申请全额退款即可。

有关任何其他信息或申请计算机的全额退款，请联系您的经销商。

关于此手册指示一种危险情况，如果不避免，可能导致设备损坏或信息丢失。

切记：表示重要但与危险无关的信息（例如，与财产损失相关的消息）。

系统会发出一个通知，提醒用户如果不完全按照所述的步骤进行操作，将可能导致数据丢失或硬/软件损坏。

此外还包含用于解释概念或完成任务的基本信息。

注：包含其他信息，以强调或补充正文的要点。

提示：提供完成任务的有用提示。

HP Z32 4K UHD DisplayFront 1. Power light Power LED:Active = WhiteStandby = AmberHP Z32 4K UHD Display1.Function buttons2.Power button3.Master power switch4.Power connector5.VESA release button6.HDMI port7.Mini DisplayPort™8.DisplayPort™9.Audio-out jackB Type-C™ port (upstream)B Type-A ports (2) (downstream)12.Security cable slotB Type-A port (downstream)B Type-C™ 3.1 port (downstream)NOTE: The USB Type-C™upstream port can function as a DisplayPort audio/video input, as a USB 3.0 upstream connection, or it can be used to deliver up to 65 watts of power to a device. See Power Output section below for specifications.Panel Specifications* Display Size (Diagonal) 31.5-inchDisplay Panel Type IPSMicro-Edge Bezel Yes, 4 sidedNative Resolution/Timing 3840 x 2160 @ 60 HzPanel Bit Depth 10bit (8 + 2 FRC)Aspect Ratio 16:9Brightness - Typical 350 cd/m2Static Contrast Ratio - Typical 1,300:1Dynamic Contrast Ratio -Typical 5,000,000:1NOTE: Dynamic Contrast Ratios during video playback only, depending on series of frames or timeduration.Pixel Pitch 0.18159(H)mm x 0.18159(V)mmPixels Per Inch (PPI) 140Backlight Lamp Life (to half brightness -in hours)30k hours minimumAnti-Glare Panel YesResponse Time – Typical 14ms Gray to GrayNOTE: Product default is 14ms response time and can be adjusted to as low as 6ms in the display menu.All performance specifications represent the typical specifications provided by HP's componentmanufacturers; actual performance may vary either higher or lower.Horizontal Viewing Angle(typical CR>10)178°Vertical Viewing Angle (typical CR>10) 178°Panel Active Area (w x h) 697.3056 x 392.2344 mmPreset Graphic Modes/Supported Resolutions 640×480 @60Hz 720×400 @70Hz 800×600 @60Hz 720×480 @60Hz 1024×768 @60Hz 1280×720 @60Hz 1280×768 @60Hz 1280×800 @60Hz 1280×1024 @60Hz 1440×900 @60Hz 1600×900 @60Hz 1600×1200 @60Hz 1680×1050 @60Hz 1920×1080 @60Hz 1920×1200 @60Hz 2560×1440 @60Hz 2560×1600 @60Hz 3840×2160 @30Hz 3840×2160 @60HzMaximum Resolution 3840 x 2160 @ 60 HzRecommended Resolution 3840 x 2160 @ 60 HzVertical Scan Range 29-60 HzHorizontal Scan Range 28-135 kHzMaximum Pixel Clock Speed 533.25 MHz*All performance specifications represent the typical specifications provided by HP's componentmanufacturers; actual performance may vary either higher or lower.Color Gamut Coverage sRGB 99% sRGBBT.709 100%Color Management Factory Color Calibrated YesFactory Color Presets BT.709, sRGBDefault Color Temperature D65Low Blue Light Modes YesRGB Channel Adjust Yes, GainMonitor Specifications Exterior Color of Monitor Bezel & Stand Black PearlPlug & Play YesTilt Yes, -5° to +20°Swivel Yes, 90°Height Adjustment Range Yes,120 mmVESA Mounting Yes 100 mm with integrated mountSecurity Lock Ready YesDetachable Base Yes, ships detachedWarranty 3/3/0Zero Bright Dot Guarantee YesOn Screen Display (OSD) On Screen Display User Controls Brightness, Contrast, Color Control, Input Control, ImageControl, PIP Control, Power Control, Menu Control,Management, Information, ExitMonitor Control Buttons or Switches Menu, Viewing Modes, Information, Next Active Input,PowerUser-Assignable Function Buttons Yes, 3Languages 10 (English, Spanish, German, French, Italian, Netherlands,Portuguese, Japanese, T-Chinese and S-Chinese)Connector Types DisplayPort™ 1 D isplayPort™ 1.2Mini- DisplayPort™ 1 Mini DisplayPort™ 1.2HDMI 1 HDMI 2.0USB Type-C™2, 1 upstream (rear) and 1 downstream (side)HDCP support Yes, HDCP 1.4 for D isplayPort™ and HDCP 2.2 for HDMIAudio Output 1 Line outUSB Port Specifications USB Version 3.0USB Hub YesDownstream Ports 3 USB-A downstream ports Fast Charging USB Ports 3 PortsPower Output Maximum 7.5W (BC1.2)USB-Type C™ Port Specifications USB-Type C™ Version USB 3.1 Gen1 / 5 GbpsDownstream USB-Type C™ Ports 1 PortUpstream USB-Type C™ Ports 1 PortVideo Support Rear: USB-C™ Alt mode –DisplayPort™ 1.2 Power OutputRear: 5V/3A, 9V/3A, 10V/5A, 12V/5A15V/4.33A, 20V/3.25ASide: 5V/1.5A; 5V/3APower Output MaximumRear: 65W MaxSide: 15W MaxPower & Operating Specs Power Supply InternalInput Power 100 - 240 VAC 50/60 Hz Power Consumption – Maximum 185 WEnergy Saving/Standby Mode 0.5 WPower Consumption – Typical 70 WPower cable length 1,9 m (6.2 ft)Special Features Picture-in-Picture, Picture-by-Picture Yes, 2 PIP/PBPRemote Manageability NoENERGY STAR® Data Operational Mode at 100 VAC 32.58 WOperational Mode at 115 VAC 32.65 WOperational Mode at 230 VAC 31.44 WEU Energy Efficiency Class (ERP Lot-5) On-mode Power Consumption 45WAnnual Power Consumption 66 kWhEnergy Efficiency Class GVisible Screen Size 31,5"/80,0 cm DiagonalOperating Conditions Operating Temperature - Celsius 5° to 35° COperating Temperature - Fahrenheit 41° to 95° FNon-operating Temperature - Celsius -20° to 60° CNon-operating Temperature -Fahrenheit-4° to 140°Operating Humidity 20% to 80% non-condensingNon-operating Humidity 5% to 95%Operating Altitude 0 to 5,000 m (16,404 ft)Non-operating Altitude 0 to 12,192 m (0 to 40,000 ft)Environmental Features and Certifications Mercury-free LED display backlighting Yes, Mercury-free LED backlightsArsenic-Free Display Glass YesLow Halogen YesGSE HP-00011-01B, table 2 defines low-halogen (BFR,CFR, PVC)NOTE: External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low Halogen.Agency Approvals and Certifications WW applicationCE,CB,KC/KCC/ICE/TUV-S/ISO 9241-307/EAC/UL/PSB/ISC/CCC/CEL/CECP/SEPA/TCO/EnergyStar/VCCI/FCC/BSMI/WEEEMicrosoft WHQL Certification Win 10, Win 8, Win 7ENERGY STAR® certified Yes, ENERY STAR® 7EPEAT® Registered EPEAT® 2019 RegisteredNOTE: Based on US EPEAT® registration according to IEEE 1680.1-2018 EPEAT®. Status varies by country. Visit for more information.China Energy Label CEL Grade 1TCO Certified YesSmartWay Transport Partnership - NAonlyYes (NA SKU)Contains Recycled Plastics in Back Cover 0.35Contains Recycled Plastics Contains Recycled Plastics inBase/Stand0.35Contains Recycled Plastics in OtherParts17.5%Recyclable Plastics Back cover, Middle cover, VESA cover, Hinge cover, Basetop cover, Base bottom cover, Column back cover, Columnfront coverRecyclable Packaging (Box, packingmaterials)Carton, Paper Board, Corner PaperProduct Dimensions (Unpacked withstand)Metric (W x D x H)71.45 x 24.8 x 56.44 cmImperial (W x D x H)28.13 x 9.76 x 22.22 inUnit Product/Package Specifications Product Dimensions (Packed)Metric (W x D x H) 83.3 x 32.5 x 51.5 cmImperial (W x D x H) 32.8 x 12.8 x 20.3 inDisplay Head Dimensions (Unpackedwithout stand)Metric (W x D x H) 71.45 x 4.45 x 41.09 cmImperial (W x D x H)29.16 x 1.752 x 16.18 inBase Area FootprintMetric (W x D x H) 300 x 248 mmImperial (W x D x H) 11.81 x 9.764 inProduct Weight (Unpacked with stand)Metric 12.16 kgImperial26.81 lbProduct Weight (Packed)Metric 15.28 kgImperial 33.69 lbProduct Weight (Head Only)Metric 7.59 kgImperial 16.733 lbPallet DimensionsMetric (L x W x H) 985 x 840 x 120 mm / 1310 x 840 x 120 mmPallet Information Imperial (L x W x H) 38.8 x 33.1 x 4.7 in / 51.6 x 33.1 x 4.7 inPallet Total WeightMetric 198.9 kg / 263.5kgImperial 438.1 lbs / 580.4 lbsPallet Layers 4Pallet Product per Layer 3 / 4Total Products per Pallet 12 / 16Container Load, 20-Foot 196 unitsContainer Load, 40-Foot 392 unitsContainer Load, 40-Foot HighQ 392 unitsOptions1HP B500 PC Mounting Bracket 2DW52AAHP UHD USB Graphics Adapter N2U81AAHP Business PC Security Lock v2 Kit N3R93AASoftware included HP Display AssistantSoftware Included What's in the box? AC power cord (1.9m) 6.2 ftUSB C-to-A data cable (1.8m)USB-C-to-C cable (1.8m)DP Cable (1.8m)Accessories IncludedUser Guide Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish,Dutch, Finnish, French, German, Greek, Hungarian, Italian,Japanese, Kazakh, Korean, Norwegian, Polish, BrazilianPortuguese, Russian, Slovenian, Spanish, Swedish andTurkish.Other Warranty Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish,Dutch, Finnish, French, German, Greek, Hungarian, Italian,Japanese, Kazakh, Korean, Norwegian, Polish, BrazilianPortuguese, Russian, Slovenian, Spanish, Swedish andTurkish.Service and Warranty Protected by HP, including a 3 year standard limited warranty. Optional HP Care Pack Services are extended service contracts that extend your protection beyond the standard warranties.2Copyright © 2019 HP Development Company, L.P.The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the Unite d States and other countries. ENERGY STAR is a registered trademark owned by the U.S. Environmental Protection Agency. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.1.Sold separately. See product QuickSpecs for exact device and display compatibility.2.HP Care Packs are sold separately. Service levels and response times for HP Care Packs may vary depending on your geographiclocation. Service starts on date of hardware purchase. Restrictions and limitations apply. For details, visit/go/cpc. HP services are governed by the applicable HP terms and conditions of service provided or indicated to Customer at the time of purchase. Customer may have additional statutory rights according to applicable local laws, and such rights are not in any way affected by the HP terms and conditions of service or the HP Limited Warranty provided with your HP Product.。

Pregledajte tehničke specifikacije i podržane vrste papira za štampač.●Tehničke specifikacije●Podržani tipovi papiraTehničke specifikacijePregledajte tehničke specifikacije za štampač.Za najnovije informacije posetite /support/ljM329MFP, /support/ljM428MFP, ili /support/ljM429MFP.Tabela 1 Tehničke specifikacije po modelu štampačaIme modela Broj proizvoda Ime modela Broj proizvoda Ime modela Broj proizvoda M428fdwW1A30AM429fdwW1A35AM428dwW1A28AM428dwW1A31AM429dwW1A33AM428fdnW1A29AM428fdnW1A32AM429fdnW1A34AM329dnW1A23AM329dwW1A24ARad sa papirom Ležište 1 (kapacitet 100 listova)Priloženo Priloženo Priloženo Priloženo Priloženo Rad sa papirom Ležište 2 (kapacitet 250 listova)Priloženo Priloženo Priloženo Priloženo Priloženo Rad sa papirom Opciono pomoćno ležište za 550listova Opcionalno Opcionalno Opcionalno Opcionalno Opcionalno Rad sa papirom Automatsko dupleks štampanje Priloženo Priloženo Priloženo Priloženo Priloženo Povezanost10/100/1000 Ethernet LAN vezasa IPv4 i IPv6 protokolima Priloženo Priloženo Priloženo Priloženo Priloženo Povezanost Hi-Speed USB 2.0Priloženo Priloženo Priloženo Priloženo Priloženo Povezanost Port za USB usputno štampanje Priloženo Priloženo Priloženo Priloženo Priloženo Povezanost Server za štampanje zapovezivanje na bežičnu mrežu Priloženo Priloženo Nije dostupno Nije dostupno Priloženo Povezanost Bluetooth Low Energy (BLE)Priloženo Priloženo Nije dostupno Nije dostupno Priloženo Povezanost Wi-Fi Direct za štampanje samobilnih uređaja Priloženo Priloženo Nije dostupno Nije dostupno PriloženoEkran i ulazni interfejs kontrolne table Kontrolna tabla sa ekranom u bojiosetljivim na dodir Priloženo Priloženo Priloženo Priloženo PriloženoSRWW1Tabela 1 Tehničke specifikacije po modelu štampača (nastavljeno)Ime modela Broj proizvoda Ime modela Broj proizvoda Ime modela Broj proizvoda M428fdw W1A30A M429fdw W1A35AM428dw W1A28A M428dw W1A31A M429dw W1A33A M428fdn W1A29A M428fdn W1A32A M429fdn W1A34A M329dn W1A23AM329dw W1A24AŠtampanjeŠtampa 38 stranica u minutu (ppm) na papiru veličine A4 i 40 stranica na papiru Letter formata Priloženo PriloženoPriloženoNije dostupnoNije dostupnoŠtampanjeŠtampa 35 stranica u minutu (ppm) na papiru veličine A4 i 37stranica na papiru Letter formata Nije dostupno Nije dostupno Nije dostupno Priloženo PriloženoŠtampanje Skladištenje zadataka i privatno štampanje Priloženo Priloženo Priloženo Priloženo Priloženo FaksFunkcije faksaPriloženo Nije dostupno Priloženo Nije dostupno Nije dostupno Kopiranje i skeniranje Kopira i skenira do 32 stranica u minutu (ppm)PriloženoPriloženoPriloženoPriloženoPriloženoKopiranje i skeniranjeDvoglavi ulagač dokumenata za 50 stranica sa automatskim dvostranim kopiranjem i skeniranjemPriloženo Nije dostupno Priloženo Nije dostupno Nije dostupnoKopiranje i skeniranjeUlagač dokumenata za 50 stranica sa jednostranim kopiranjem i skeniranjem Priloženo Priloženo Priloženo Priloženo PriloženoKopiranje i skeniranjeOpcije Skeniranja u e-poštu, Skeniranja na USB i Skeniranja u mrežnu fascikluPriloženo Priloženo Priloženo Priloženo PriloženoPodržani tipovi papiraUlazna ležišta i jedinica za dvostrano štampanje podržavaju nekoliko vrsta papira. Ležište 1 podržava papir u opsegu težine od 60 do 175 g/m 2. Ležište 2, ležište 3 (opcionalno) i jedinica za dvostrano štampanje podržavaju papir u opsegu težine od 60 do 120 g/m 2.NAPOMENA:Kako biste postigli najbolje rezultate, pre štampanja u upravljačkom programu štampača izaberite ispravan format i vrstu papira.2SRWWTabela 2 Tipovi papira koje podržavaju ulazna ležišta i jedinica za dvostrano štampanjeVrsta papira Tray 1 (Ležište3)Tray 2 (Ležište3)Ležište 3(opcionoležište za 550listova)Jedinica zadvostranoštampanje(modeli saautomatskomjedinicom zadvostranoštampanje)RučnodvostranoštampanjeRavno Podržano Podržano Podržano Podržano PodržanoHP EcoEfficient Podržano Podržano Podržano Podržano PodržanoLak 60-74 g Podržano Podržano Podržano Podržano PodržanoSrednji 85-95 g Podržano Podržano Podržano Podržano PodržanoSrednje težak 96–110 g Podržano Podržano Podržano Podržano PodržanoTežak 111–130 g Podržano Podržano Podržano Nije podržano PodržanoIzuzetno težak 131–175 g Podržano Nije podržano Nije podržano Nije podržano PodržanoOznake Podržano Nije podržano Nije podržano Nije podržano Nije podržanoMemorandum Podržano Podržano Podržano Podržano PodržanoKoverte Podržano Nije podržano Nije podržano Nije podržano Nije podržanoPrethodno štampano Podržano Podržano Podržano Podržano PodržanoPerforirano Podržano Podržano Podržano Podržano PodržanoU boji Podržano Podržano Podržano Podržano PodržanoČvrst papir Podržano Podržano Podržano Podržano PodržanoReciklirano Podržano Podržano Podržano Podržano PodržanoHrapavo Podržano Podržano Podržano Nije podržano Podržano SRWW Podržani tipovi papira34SRWW。

用户指南版本 3©Copyright 2019 HP Development Company, L.P.法律通告本文档中包含的信息如有更改，恕不另行通知。

HP 产品和服务的唯一保证在该产品或服务附带的明示保修声明中列出。

本文中的任何内容都不应被引申为补充保证。

HP 对本文档中出现的技术错误、编辑错误或疏漏之处概不负责。

支持 IPv6商标Adobe®、Acrobat®、Adobe Photoshop®和 Adobe® PostScript® 3™ 是 AdobeSystems Incorporated 的商标。

ENERGY STAR 和 ENERGY STAR 标志是美国的注册商标。

Microsoft® 和 Windows® 是Microsoft Corporation 在美国的注册商标。

PANTONE® 是 Pantone, Inc. 的标准颜色检查商标。

目录1 简介 (1)欢迎使用您的打印机 (2)安全防范措施 (2)主要组件 (6)打开和关闭打印机 (10)前面板 (11)HP Utility (14)HP 打印预览 (14)内嵌式网站服务器 (15)示范打印件 (15)配置打印机 (16)移动打印 (23)辅助功能 (23)其他信息资源 (23)2 纸张操作 (25)一般建议 (26)将纸卷装到卷轴上 (26)将纸卷装入打印机 (29)取出卷筒 (31)装入单张纸 (31)取出单张纸 (34)敏感纸张模式（仅限 Z6dr 和 Z9+dr） (34)查看有关纸张的信息 (35)纸张预设 (35)打印纸张信息 (37)移动纸张 (37)进纸并裁切纸张 (38)保持纸张 (38)更改晾干时间 (38)打开和关闭自动水平裁纸器 (39)打开和关闭自动垂直修剪器（仅限 Z6dr 和 Z9+dr） (39)使用收纸器 (39)ZHCN iii3 使用两个卷筒（仅限 Z6dr/Z9+dr） (47)多卷筒打印机的优点 (48)打印机如何向纸卷分配作业 (48)4 网络 (50)简介 (51)控制网络协议 (51)前面板上的菜单项 (51)链路配置方法 (54)故障排除 (54)5 打印 (58)简介 (59)从 U 盘打印 (59)使用打印机驱动程序从计算机进行打印 (60)高级打印设置 (60)6 移动打印 (73)移动打印 (74)从操作系统中打印 (74)通过电子邮件打印 (HP ePrint) (75)从 HP Smart 应用程序中进行打印和共享 (75)移动规格 (75)7 作业队列管理 (76)前面板中的作业队列 (77)内嵌式网站服务器或 HP DesignJet Utility 中的作业队列 (82)8 颜色管理 (85)简介 (86)如何再现色彩 (86)颜色管理流程简介 (86)颜色校准 (86)颜色配置 (88)打印机驱动程序中的颜色管理 (90)在前面板中执行颜色管理 (95)9 实际打印示例 (96)根据正确的大小调整比例打印草稿以便修订 (97)从 Adobe Acrobat Reader 或 Adobe Acrobat Pro 中打印 PDF 多页作业 (97)用正确的颜色打印文档 (99)iv ZHCN打印项目 (105)打印演示文稿 (108)在 Microsoft Office中执行打印操作与大小调整操作 (111)使用垂直修剪器打印无边界作业 (113)10 检索打印机用量信息 (116)获取打印机统计信息 (116)检查用量统计信息 (116)检查作业的用量统计信息 (119)检查成本分配 (120)11 处理墨盒和打印头 (121)关于墨盒 (122)检查墨盒状态 (122)卸下墨盒 (122)插入墨盒 (123)关于打印头 (125)检查打印头状态 (125)卸下打印头 (125)插入打印头 (128)安全模式 (131)12 维护打印机 (132)检查打印机状态 (133)清洁打印机表面 (133)维护墨盒 (133)移动或存放打印机 (133)更新固件 (134)更新软件 (135)打印机维护套件 (135)安全文件擦除 (136)磁盘清理 (136)13 附件 (137)如何订购耗材和附件 (138)附件简介 (142)处置说明 (144)14 纸张问题的故障排除 (145)无法成功装入纸张 (146)纸张类型不在驱动程序、HP Utility 或前面板中 (147)ZHCN v打印机在错误的纸张类型上打印 (149)自动裁切不可用 (149)暂停以等待纸张 (149)卷筒纸张不进纸 (150)纸张卡塞 (150)出纸盘中留有纸带，因而发生卡纸 (153)出纸区域和裁纸器轨道区域留有纸带，因而发生卡纸（仅限 Z6dr 和 Z9+dr） (153)打印机在有纸时显示缺纸 (153)打印件未准确落入纸筐 (153)打印完毕后纸张留在打印机中 (153)打印完毕后裁剪纸张 (153)水平裁纸器裁切不正常 (154)垂直修剪器裁切不正常（仅限 Z6dr 和 Z9+dr） (154)垂直修剪器裁切不准确（仅限 Z6dr 和 Z9+dr） (155)垂直修剪器：打印机报告模块缺失（仅限 Z6dr 和 Z9+dr） (156)垂直修剪器在废纸上留下痕迹 (157)卷轴上的卷筒松弛 (157)重新校准进纸 (157)15 打印质量问题的故障排除 (160)一般建议 (161)水平线条（条纹）横贯图像 (161)条纹表现为不整齐的水印 (162)整幅图像模糊或呈颗粒状 (162)纸张不平 (162)打印件出现磨损或刮花 (163)纸张上出现墨渍 (163)接触打印件时黑色墨水脱落 (164)对象的边缘呈阶梯状或不清晰 (164)对象的边缘比预期亮度暗 (165)裁切纸打印件底端出现水平线条 (165)不同颜色的垂直线条 (165)打印件上出现白点 (165)颜色不准确 (166)我的打印件缺乏光泽均匀性（仅限 Z9+） (167)图像不完整（底部被裁剪） (167)图像被截切 (167)打印的图像丢失某些对象 (168)线条过粗、过细或丢失 (168)线条呈阶梯状或参差不齐 (169)打印的线条为双线或颜色错误 (169)线条不连续 (170)vi ZHCN图像诊断打印件 (171)如果仍然存在问题 (173)16 墨盒和打印头问题的故障排除 (174)无法插入墨盒 (175)墨盒状态信息 (175)打印机未检测到光亮剂墨盒（仅限 Z9+） (175)无法插入打印头 (175)前面板建议重新安装或更换打印头 (175)清洁打印头 (176)清洁打印头墨滴检测器 (177)对齐打印头 (179)打印头状态消息 (181)17 打印机一般问题的故障排除 (182)打印机不打印 (183)前面板无法初始化 (183)打印机速度非常慢 (183)计算机和打印机之间的通信失败 (184)无法访问内嵌式 Web 服务器 (184)无法连接到 Internet (184)Web 服务问题 (185)自动文件系统检查 (185)警报 (185)18 前面板错误消息 (186)系统错误日志 (186)19HP 客户服务 (187)简介 (188)HP 专业服务 (188)客户自行维修 (189)与 HP 支持部门联系 (189)20 打印机规格 (190)功能规格 (191)物理规格 (192)内存规格 (192)电源规格 (192)ZHCN vii噪音规格 (193)术语表 (194)索引 (197)viii ZHCN1简介●欢迎使用您的打印机●安全防范措施●主要组件●打开和关闭打印机●前面板●HP Utility●HP 打印预览●内嵌式网站服务器●示范打印件●配置打印机●移动打印●辅助功能●其他信息资源ZHCN1欢迎使用您的打印机您的打印机是一种彩色喷墨打印机，适合在最大宽度为 610 毫米或 1118 毫米的纸张上打印高质量的图像。

Single-Output Autoranging: 200 W to 1000 W Power SuppliesRemote Sensing:Up to 2 V drop in each lead. Voltage regulation degrades for greater than 0.5 V drop.Regulatory Compliance:Listed to UL-1244; certified to CSA 556B; complies with EN 61010-1, carries the CE mark RFI Suppression: Complies with CISPR-11, Group 1, Class A Inductive Load:HP 6023A, 6028A are stable in CC mode for loads up to 1 H. HP 6010A–6012B, 6015A are stable in CC mode for loads up to 100 mH.Size: HP 6030A–32A, 6035A: 425.5 mm W x 132.6 mm H x 503.7 mm D (16.75 in x 5.25 in x 19.83 in). HP 6033A, 6038A, 6023A, 6028A: 212.3 mm W x 177.0 mm H x 516.4 mm D (8.36 in x 6.97 in x 17.87 in). HP 6010A–12B, 6015A: 425.5 mm W x 132.6 mm H x 516.4 mm D (16.75 in x 5.25 in x 20.33 in).Key Literature 1999/00 HP Power ProductsCatalog, p/n 5968-2199For more information, visit our web site:/go/autorangingPS Ordering Information Standard: 104 to 127 VAC, 48 to 63 Hz Opt 001Front panel has only line switch, line indicator, and OVP adjust (HP 6030A–33A and 6038A only)Opt 002Provides extra programming and monitoring capabilities (HP 6010A–12B, 6023A, 6028A only) Opt 10087 to 106 Vac, 48 to 63 Hz (power supply output is derated to 75%) HP 6030A–33A, 6035A, 6038A only Opt 220191 to 233 Vac, 48 to 63 HzOpt 240209 to 250 Vac, 48 to 63 HzOpt 800Rackmount Kit for Two Half-rack UnitsSide by Side. HP p/n 5061-9694 and 5062-3978Opt 908Rackmount Kit for a Single Half-rack UnitHP Models 6023A, 6028A, 6033A and 6038A (with blank filler panel); HP p/n 5062-3960HP Models 6010A–12B, 6015A, 6030A–32A and 6035A; HP p/n 5062-3977Opt 909Rackmount Kit with Handles. For HP 6010A–12B, 6015A, 6030A–32A, 6035A; HP p/n 5062-3983Opt 910Service Manual and extra Operating GuideFor HP Models 6010A–12B, 6015A, 6023A, 6028A For HP Models 6030A–33A, 6035A, 6038AA line cord option must be specified for HP 6010A–12B, 6015A, 6030A–32A, 6035A. See page 180 for orderinginformation.AccessoriesHP 5080-2148 Serial Link Cable, 2 m (6.6 ft) for HP 6030A,6031A, 6032A, 6033A, 6035A, and 6038AHP 1494-0060 Rack Slide Kit Abbreviated Specifications and CharacteristicsSystem Autorangers (GPIB)HP 6030A HP 6031A HP 6032A HP 6033A HP 6035A HP 6038AAutorangers (w/o GPIB) HP 6010A HP 6011A HP 6012B HP 6023A HP 6015A HP 6028A Output ratings Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A Maximum power Watts 1,200 W 1,072 W 1,200 W 240 W 1,050 W 240 W Autoranging output V1, P1200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A V2, P2120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 AV3, P360 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 AProgramming accuracy Voltage 0.035% +145 mV 0.035% +15 mV 0.035% +40 mV 0.035% +9 mV 0.25% +400 mV 0.035% +40 mV (at 25˚ C ±5˚ C)Current 0.2% +25 mA 0.25% +250 mA0.2% +85 mA0.15% +20 mA 0.3% +63 mA 0.09% +10 mA System models onlyRipple and noise,Voltage rms 22 mV 8 mV 5 mV 3 mV 50 mV 3 mV (20 Hz to 20 MHz)p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mVCurrent rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mAReadback accuracy Voltage 0.08% + 80 mV 0.08% +7 mV 0.08% +20 mV 0.07% +6 mV 0.5% +200 mV0.07% +50 mV (at 25˚ C ±5˚ C)Current 0.36% +15 mA 0.4% +100 mA 0.36% +35 mA 0.3% +25 mA 0.5% +50 mA 0.2% +11 mA System models onlyLoad regulation Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV Current 0.01%+10 mA 15 mA 10 mA 9 mA .03+34 mA 5 mA Line regulation Voltage 0.01%+ 5 mV 2 mV 3 mV 1 mV 13 mV 2 mV System models only Current 0.01%+ 5 mA 25 mA 10 mA 6 mA .03+17 mA 2 mA Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms 10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 75 mV dc floating voltage (either terminal can be ±550 V ±240 V ±240 V ±240 V ±550 V ±240 V grounded or floated from chassis ground)ac input current 100 Vac (system only)24 A 24 A 24 A 6.0 A 24 A 6.0 A 120 Vac 24 A 24 A 24 A 6.5 A 24 A 6.5 A220 Vac 15 A 15 A 15 A 3.8 A 15 A 3.8 A240 Vac 14 A 14 A 14 A 3.6 A 14 A 3.6 AWeight Net 16.3 kg (36 lb)17.2 kg (38 lb)16.3 kg (36 lb)9.6 kg (21 lb)16.3 kg (36 lb)9.6 kg (21 lb)Shipping 21.7 kg (48 lb)22.7 kg (50 lb)21.8 kg (48 lb)11.4 kg (25 lb)21.7 kg (48 lb)11.4 kg (25 lb)System Autorangers (GPIB)HP 6030A/ HP 6031A/ HP 6032A/ HP 6033A/ HP 6035A/ HP 6038A/ Autorangers (w/o GPIB) HP 6010A/ HP 6011A/ HP 6012B/ HP 6023A/ HP 6015A/ HP 6028A/ Above:HP 6023A, HP 6028A Below:HP 6010A, 6011A, 6012A and 6015A Above:HP 6033A and HP 6031A(Option 001 on right)Below:HP 6030A, 6031A, 6032A, and 6035A,4HP 6010A HP 6011A HP 6012A HP 6015A HP 6023A HP 6028A HP 6030A HP 6031A HP 6032A HP 6033A HP 6035A HP 6038A 175。

bk7231英文规格书Title: BK7231 English Specification BookIntroduction:The BK7231 English Specification Book serves as a comprehensive guide to understanding the technical specifications and features of the BK7231 model. This article aims to provide an accurate and detailed overview of the book's content. It will be structured as follows: an introduction, a main body consisting of five major points with 3-5 sub-points each, and a conclusion summarizing the key aspects covered in the book.Main Body:1. Hardware Specifications:1.1 Processor: The BK7231 is equipped with a high-performance processor, providing efficient data processing capabilities.1.2 Memory: The device offers ample memory capacity, enabling smooth multitasking and storage of large files.1.3 Connectivity: The BK7231 supports various connectivity options, including Wi-Fi, Bluetooth, and Ethernet, ensuring seamless integration with other devices and networks.1.4 Power Consumption: The device is designed to optimize power usage, maximizing battery life and energy efficiency.1.5 Interfaces: The BK7231 features multiple interfaces, such as USB, HDMI, and audio ports, facilitating versatile connectivity with external peripherals.2. Software Features:2.1 Operating System: The BK7231 runs on a reliable and user-friendly operating system, providing a stable and intuitive user experience.2.2 Security: The device incorporates robust security measures, including encryption protocols and firewall protection, ensuring data privacy and preventing unauthorized access.2.3 Application Support: The BK7231 supports a wide range of applications, allowing users to customize their experience and enhance productivity.2.4 Firmware Updates: The device offers regular firmware updates, ensuring compatibility with the latest technologies and providing access to new features and improvements.2.5 Multilingual Support: The BK7231 is equipped with multilingual support, enabling users from different regions to operate the device in their preferred language.3. Performance and Functionality:3.1 Speed and Efficiency: The BK7231 delivers high-speed data processing and seamless performance, enabling smooth multitasking and quick response times.3.2 Wireless Range: The device offers an extensive wireless range, ensuring reliable connectivity even in large or obstructed environments.3.3 Signal Strength: The BK7231 is engineered to provide strong and stable signals, minimizing interruptions and ensuring consistent network performance.3.4 Data Transfer Rates: The device supports high data transfer rates, enabling fast and efficient file sharing and streaming.3.5 Compatibility: The BK7231 is compatible with various operating systems and devices, allowing for seamless integration and interoperability.4. Design and Ergonomics:4.1 Compact and Lightweight: The BK7231 boasts a compact and lightweight design, making it portable and easy to carry.4.2 User-Friendly Interface: The device features an intuitive and user-friendly interface, enabling effortless navigation and operation.4.3 Ergonomic Keyboard: The BK7231 is equipped with an ergonomic keyboard, providing comfortable typing experience and reducing strain on the wrists.4.4 Display Quality: The device offers a high-resolution display, delivering sharp and vibrant visuals for an enhanced viewing experience.4.5 Durability: The BK7231 is built to withstand daily wear and tear, ensuring long-lasting performance and reliability.5. Technical Support and Warranty:5.1 Customer Support: The BK7231 comes with comprehensive customer support, providing assistance for any queries or issues that may arise.5.2 Warranty Coverage: The device is backed by a warranty, offering coverage for manufacturing defects and malfunctions within a specified period.5.3 Troubleshooting Guide: The BK7231 English Specification Book includes a detailed troubleshooting guide, helping users resolve common technical issues independently.Conclusion:The BK7231 English Specification Book provides a detailed and accurate overview of the hardware specifications, software features, performance, design, and technical support offered by the BK7231 model. By understanding the content presented in this book, users can make informed decisions about the device's suitability for their needs and maximize its potential.。

Data SheetRBK753Whole Home Tri-band Mesh WiFi 6 SystemOverviewBreak free from limitations with strong,reliable, and lightning fast WiFi in every room of your home. From the top floor down to the basement, Orbi Tri-band Mesh WiFi 6 Systems bring you higher performance & simultaneous WiFi streaming, gaming & browsing on even more devices. This system includes NETGEAR Armor ™, advanced cyber security for your connected devices.Robust smart home WiFi.FeaturesCutting Edge Performance.Get the ultimate experience with 8 Streams of WiFi 6 a nd speeds up to 4.2Gbps.† Enjoy 4K/8K UHD streaming, l ag-free gaming & smooth streaming.It’s Easy.Enjoying your WiFi has never been easier. With the Orbi app, s et up your WiFi, customize your settings & enjoy your new O rbi WiFi in minutes.Gigabit Speeds Where You Need Them.Don’t let your home be a maze of dead zones. Get consistent speeds everywhere with Tri-band dedicated wireless backhaul & 8 Gigabit Ethernet ports.Cybersecurity With NETGEAR Armor ™.Protect your connected home devices from Internet threats with best-in-class anti-virus, anti-malware & data protection.1More Capacity, More Battery Life.Don’t be held back by limited capacity. Enjoy more devices simultaneously with 4X the capacity than before & improvedefficiency for longer battery life.Manage Your Kids’ Screen Time.NETGEAR Smart Parental Controls ™ let you easily manage your kids’ time online across their connected devices.2Data Sheet RBK753Whole Home Tri-band Mesh WiFi 6 SystemHouse DiagramRobustSmart Home ExperienceBuilt for Gigabit Internet Speeds EverywhereYou’ve paid for the fastest Internet speeds, now experience it everywhere in your home.Orbi AppUse the Orbi app to setup and manage your Orbi WiFi.NETGEAR Armor empowers you to eliminatevulnerabilities or simply know the status of your home network and devices, anytime, anywhere. Get instant notifications when malicious threats are detected, block unknown devices from joining your Orbi home network or take action on vulnerabilities as they are discovered easily through the Orbi App.Data SheetRBK753 Whole Home Tri-band Mesh WiFi 6 SystemOrbi Router (RBR750)Orbi Satellite (RBS750)Data Sheet RBK753Whole Home Tri-band Mesh WiFi 6 SystemWhat’s In the Box?• One (1) Orbi Router (RBR750)• Two (2) Orbi Satellites (RBS750)• One (1) 2m Ethernet cable• Three (3) 12V/2.5A power adapters • Quick start guideWhat Do I Need for Orbi to Work?• High-speed Internet connection• Connect to existing modem or gatewayTechnical Specifications• O rbi AX4200 Router & AX4200 Satellites (600 + 1200 + 2400Mbps)†• Simultaneous Tri-band WiFi - R adio 1: IEEE ® 802.11b/g/n/ax2.4GHz—1024-QAM support - R adio 2: IEEE ® 802.11a/n/ac/ax5GHz—1024-QAM support - R adio 3: IEEE ® 802.11a/n/ac/ax5GHz—1024-QAM supportPhysical Specifications• Dimensions: 9.1 x 7.2 x 2.8 in each • Weight: 1.9 lb eachSoftware Features• Orbi Mobile App• M U-MIMO capable for simultaneous data streaming • I mplicit & Explicit Beamforming for 2.4GHz & 5GHz bands• Processor - Router & Satellite - P owerful quad-core 1.4GHz processor • Memory – Router - 512MB NAND flash and 1GB RAM • Antenna – Router & Satellite (each) - S ix (6) high-performance internal antennas withhigh-power amplifiers • Ports – Orbi Router - T hree (3) 10/100/1000Mbps Gigabit EthernetLAN ports - O ne (1) 1Gbps Gigabit Ethernet WAN port • Ports – Orbi Satellite (each) - T wo (2) 10/100/1000Mbps Gigabit EthernetLAN ports • L ink aggregation using WAN port and a Gigabit Ethernet port • Security - C omprehensive anti-virus & data theftprotection for your PC, Mac ® and mobile devices with NETGEAR Armor ™-S tandards-based WiFi Security(802.11i, 128-bit AES encryption with PSK) - G uest WiFi Network is easy to setup separate &secure Internet access for guests • Voice Control - A mazon Alexa ™- The Google © Assistant • N ETGEAR Smart Parental Controls ™ — Manage your kids’ time online across their connected devices. Learn more at /spcThis product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller. /warranty *90-day complimentary technical support following purchase from a NETGEAR authorized reseller.‡Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage will vary and be lowered by network and environmental conditions, including network traffic volume, device limitations, and building construction. NETGEAR makes no representations or warranties about this product’s compatibility with future standards. Up to 4,200Mbps wireless speeds achieved when connecting to other 802.11ax 4,200Mbps devices. 1NETGEAR Armor ™ is free during the trial period. A yearly subscription, after the trial period, protects your connected devices. Visit /armor 2NETGEAR Smart Parental Controls™ fees apply for a Premium Plan. Visit /spc for more information. For regulatory compliance information, visit /about/regulatory For indoor use only.NETGEAR, the NETGEAR Logo, NETGEAR Armor, NETGEAR Smart Parental Controls, and Orbi are trademarks of NETGEAR, Inc. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC. Any other trademarks mentioned herein are for reference purposes only. © 2021 NETGEAR, Inc. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, /supportD-RBK753-3。

Utility for MGate MB3660 Series (MCC Tool for Linux) ReleaseNotesSupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsLinux Kernel 2.6.x, Linux Kernel 3.x, Linux Kernel 4.xMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate MB3660-8-J-2AC, MGate MB3660I-16-2AC,MGate MB3660-16-J-2AC, MGate MB3660-8-2AC, MGate MB3660-8-2DC, MGate MB3660I-8-2AC,MGate MB3660-16-2AC, MGate MB3660-16-2DC, NPort 5110A, NPort 5110A-T, NPort 5130A, NPort 5130A-T, NPort 5150A, NPort 5150A-T, NPort 5210A, NPort 5210A-T, NPort 5230A, NPort 5230A-T,NPort 5250A, NPort 5250A-T, NPort 5150AI-M12, NPort 5150AI-M12-CT, NPort 5150AI-M12-T, NPort 5150AI-M12-CT-T, NPort 5250AI-M12, NPort 5250AI-M12-CT, NPort 5250AI-M12-T, NPort 5250AI-M12-CT-T, NPort 5450AI-M12, NPort 5450AI-M12-CT, NPort 5450AI-M12-T, NPort 5450AI-M12-CT-T,NPort 6150, NPort 6150-T, NPort 6250, NPort 6250-M-SC, NPort 6250-S-SC, NPort 6250-T, NPort 6250-M-SC-T, NPort 6250-S-SC-T, NPort 6450, NPort 6450-T, NPort 6610-8, NPort 6610-8-48V,NPort 6610-16, NPort 6610-16-48V, NPort 6610-32, NPort 6610-32-48V, NPort 6650-8, NPort 6650-8-T, NPort 6650-8-HV-T, NPort 6650-8-48V, NPort 6650-16, NPort 6650-16-48V, NPort 6650-16-T,NPort 6650-16-HV-T, NPort 6650-32, NPort 6650-32-48V, NPort 6650-32-HV-T, ioLogik E1210,ioLogik E1210-T, ioLogik E1211, ioLogik E1211-T, ioLogik E1212, ioLogik E1212-T, ioLogik E1213,ioLogik E1213-T, ioLogik E1214, ioLogik E1214-T, ioLogik E1240, ioLogik E1240-T, ioLogik E1241,ioLogik E1241-T, ioLogik E1242, ioLogik E1242-T, ioLogik E1260, ioLogik E1260-T, ioLogik E1262,ioLogik E1262-T, ioThinx 4510, ioThinx 4510-T• Support for plugins.• Support for ioThinx 4510.• Support for new error code -16.• Support for new commands: (1) mcc_tool -install "plugin" (2) mcc_tool -mlNew FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsLinux Kernel 2.6.x, Linux Kernel 3.x, Linux Kernel 4.xNPort 6250-T, NPort 6250-M-SC-T, NPort 6250-S-SC-T, NPort 6450, NPort 6450-T, NPort 6610-8,NPort 6610-8-48V, NPort 6610-16, NPort 6610-16-48V, NPort 6610-32, NPort 6610-32-48V, NPort 6650-8, NPort 6650-8-T, NPort 6650-8-HV-T, NPort 6650-8-48V, NPort 6650-16, NPort 6650-16-48V,NPort 6650-16-T, NPort 6650-16-HV-T, NPort 6650-32, NPort 6650-32-48V, NPort 6650-32-HV-T,ioLogik E1210, ioLogik E1210-T, ioLogik E1211, ioLogik E1211-T, ioLogik E1212, ioLogik E1212-T,ioLogik E1213, ioLogik E1213-T, ioLogik E1214, ioLogik E1214-T, ioLogik E1240, ioLogik E1240-T,ioLogik E1241, ioLogik E1241-T, ioLogik E1242, ioLogik E1242-T, ioLogik E1260, ioLogik E1260-T,ioLogik E1262, ioLogik E1262-T, ioThinx 4510, ioThinx 4510-T, MGate MB3180, MGate MB3280,MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270, MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate MB3660-8-J-2AC, MGate MB3660I-16-2AC, MGate MB3660-16-J-2AC,MGate MB3660-8-2AC, MGate MB3660-8-2DC, MGate MB3660I-8-2AC, MGate MB3660-16-2AC,MGate MB3660-16-2DC, NPort 5110A, NPort 5110A-T, NPort 5130A, NPort 5130A-T, NPort 5150A,NPort 5150A-T, NPort 5210A, NPort 5210A-T, NPort 5230A, NPort 5230A-T, NPort 5250A, NPort 5250A-T, NPort 5150AI-M12, NPort 5150AI-M12-CT, NPort 5150AI-M12-T, NPort 5150AI-M12-CT-T,NPort 5250AI-M12, NPort 5250AI-M12-CT, NPort 5250AI-M12-T, NPort 5250AI-M12-CT-T, NPort 5450AI-M12, NPort 5450AI-M12-CT, NPort 5450AI-M12-T, NPort 5450AI-M12-CT-T, NPort 6150,NPort 6150-T, NPort 6250, NPort 6250-M-SC, NPort 6250-S-SC• First release.New FeaturesN/AN/A。

MYZxA微型针式打印机使用说明书V1.02蚂蚁(东莞)科技发展有限公司MYZXA使用说明书目录目录 (i)一.特征与性能指标 (3)1.1主要特征 (3)1.2 性能指标 (3)1.3 型号说明 (5)二．安装说明 (5)2.1 打印机外形 (5)2.2 外观尺寸 (6)三．操作说明 (6)3.1 接口说明 (6)3.1.1 电源接口 (6)3.1.2 串行接口一 (7)3.1.3 串行接口二 (8)3.1.4 并行接口 (9)3.2 指示灯说明 (10)3.3按键操作说明 (10)3.3.1 走纸 (10)3.3.2 打印自检 (10)3.3.3 参数设置 (10)四．打印命令 (11)4.1 纸进给命令 (11)4.1.1 打印并换行 (11)4.1.2 打印并进纸 (11)4.1.3 设置行间距 (11)4.1.4 设置字间距 (11)4.1.5 换页 (12)4.2 选择字符集命令 (12)4.2.1 选择字符集1 (12)4.2.2 选择字符集2 (12)4.2.3 选择汉字打印 (12)4.3 格式设置命令 (12)4.3.1 设置页长 (12)4.3.2 设置装订长 (13)4.3.3 设置装订长 (13)4.3.4 设置垂直造表值 (13)4.3.5 执行垂直造表 (13)4.3.6 设置水平造表值 (13)4.3.7 执行水平造表 (14)4.3.8 打印空格或空行 (14)4.3.9 设置左限 (14)4.3.10 设置右限 (14)4.4 字符设置命令 (14)4.4.1 横向放大 (14)4.4.2 纵向放大 (15)MYZXA使用说明书4.4.3 横纵向放大 (15)4.4.4 字符放大一倍 (15)4.4.5 横纵向放大不同倍数 (15)4.4.6 允许/禁止上划线 (15)4.4.7 允许/禁止下划线 (15)4.4.8 选择上下标 (16)4.4.9 设置错位打印 (16)4.4.10 取消错位打印 (16)4.4.11 允许/禁止反白打印 (16)4.4.12 设置/取消反向打印 (16)4.4.13 设置纵向打印 (16)4.4.14 设置横向打印 (17)4.4.15 字符旋转打印 (17)4.4.16 设置打印方向 (17)4.5 图形打印命令 (17)4.5.1 打印点阵图形 (17)4.5.2 打印曲线 (18)4.5.3 打印条形码 (18)4.6 初始化命令 (18)4.6.1 打印机初始化 (18)4.7 数据控制命令 (18)4.7.1 回车 (18)4.7.2 允许/禁止打印 (19)五．使用与维护 (19)5.1 产品维护 (19)5.2.1 打印机使用注意事项 (19)5.2.2 打印机故障分析及排除 (19)附录西文字符集1 (20)附录西文字符集2 (21)版本说明 (21)MYZXA使用说明书一.特征与性能指标1.1主要特征◎采用针式打印方式◎采用高性能进口机芯◎集机芯与控制板于一体的独立打印模块◎体积小、外型美观、便于安装、功能完备、操作简单等特点◎自带单片机处理，具有标准的串行接口(RS232/485/TTL)接口、并口◎支持汉字、字符、图形等实时打印命令◎指令集与传统打印机兼容◎支持低功率模式打印◎广泛适用于医用器材、消防控制、工业控制、各种仪器仪表等需要打印的行业1.2 性能指标MYZXA使用说明书1.3 型号说明二．安装说明2.1 打印机外形说明：1、LF键/状态指示灯4、纸仓/纸卷2、纸仓开关5、固定架3、打印机头6、色带2.2 外观尺寸尺寸说明：外形尺寸：长X宽X高= 107.4 X 61.4 X 66.8 mm开孔尺寸：长X 宽= 102.4+0.5 mm X 56.4+0.5 mm嵌入深度：58.8 mm三．操作说明3.1 接口说明3.1.1 电源接口MYZXA打印机支持两种供电方式：1、5V /15W直流电源；2、9~24V/30W 直流电源。

HP WORKSTATIONS FOR HIGHER EDUCATIONHP Workstations can help higher education institutions attract, motivate, and keep students. Offering a rangeof premium technology and tools that most students can’t match at home,HP Workstations prepare studentsfor their careers as soon as theyenter the classroom—creating better problem solvers, critical thinkers, and collaborators. HP Workstations include technology tools that:ENHANCE THE STUDENT EXPERIENCENext-generation technology and cutting-edge applications provide a professional-grade classroom experience, eliminating the sluggish program performance often experienced with mainstream desktops and notebooks. HP Workstations are designed to run out of the box in high-demand environments—this means less downtime and minimal IT support requirements, so you can focus on teaching and keep students engaged.HP Z Workstations take innovation, performance, and reliability to the next level. Boasting Intel® QuickPath Architecture, Intel® Turbo Boost1 and Hyper-Threading2 technologies, the latest multi-core Intel® Core™ processors and Intel® Xeon® processors3,4 and Intel chipsets, models are available for every need and budget—from the affordable HP Z200 and HP Z400 Workstations to the maximum computing power of the HP Z600 and the HP Z800 Workstations.PREPARE STUDENTS FOR PROFESSIONAL CAREERSHP has longstanding relationships with the leading application partners in the engineering, oil and gas,financial, and media and entertainment fields your students are training to join. HP Workstations are tested and designed to work with these solutions, providinga hands-on professional-grade experience right in the classroom. All HP Z Workstations for example are tested and certified for Autodesk and Adobe applications. Coupled with HP’s engineering expertise, HP Workstations provide the right combination of innovation, reliability, and performance to support higher education’s student training needs for years to come.INCLUDE THE INNOVATIVE SOFTWARE STUDENTS WANT TO USEHP provides a unique tool to improve student productivity on HP Workstations. HP Remote Graphics Software,a high-performance real-time 3D screen sharing and remote access application, enables students to connect and collaborate with peers and professionals around the world at the click of a mouse.HP Z200 SFF (Small Form Factor) Workstation2into environments (like multimedia labs and design/production studios) where performance and quiet acoustics are equally important.HP Z800 WORKSTATIONThe HP Z800 Workstation delivers ultimate performance where you need it—in high-end design and engineering tasks, animation and Digital Media and Entertainment (DME) projects, or supporting editing and video bays. The powerhouse HP Z800 can handle the biggest, most complex engineering and design projects and offers the expandability, performance, and data storage required by power users.HP ELITEBOOK MOBILE WORKSTATIONS The HP EliteBook 8540w and 8740w MobileWorkstations deliver workstation-caliber graphics and performance for students, instructors, and staff who need to run demanding applications on the go. The industrial design is well-suited for field and lab work, meeting military standards for vibration, dust, humidity, altitude, and high temperatures.HP PERFORMANCE MONITORSHP Performance Monitors offer world-class display technology designed for compatibility with the full line of HP Workstations. They offer a range of connectivity (USB/DVI/DisplayPort) with the latest peripherals and graphics devices, and environmental responsibility with ENERGY STAR ® and EPEAT ® certifications. The new HPZR widescreen monitors feature enhanced color accuracyat ultra-wide viewing angles and full HD 5. The HPDreamColor monitor is based on HP DreamColor Enginetechnology and is great for low-light design environmentslike animation and video production facilities.The table on the next page highlights typical higher education usage scenarios for each HP Workstation.The HP Workstation family takes innovation, performance, and reliability to the next level—to help your staff, instructors, and students work better and smarter. HP Workstations are available in a wide range of configurations, from entry-level to powerhouse. They include: HP Z200 WORKSTATIONThe HP Z200 offers advanced workstation power andproductivity at starting prices that allow you to offersworkstations instead of traditional desktop computing systems in administrative areas, labs, and classrooms. The HP Z200 Workstation is one of two HP Workstations that are AutoCAD Certified by Autodesk.HP Z200 SFF WORKSTATIONThe second AutoCAD Certified HP Workstation is the surprisingly nimble, dynamic, and affordable HP Z200 Small Form Factor (SFF) Workstation, which is well suited to compact work environments such as cubicles or shared desks. These two aggressively-priced HPZ200 Workstations help you provide a workstation-class experience and pass the savings on to your students.HP Z400 WORKSTATIONThe HP Z400 Workstation delivers enhancedmulti-processor and high memory performance in bothclassroom and administrative areas, to help transform howyour staff, instructors, and students work.HP Z600 WORKSTATIONThe HP Z600 Workstation packs compute andvisualization power to help your instructors and students work faster and meet their due dates. It delivers maximum performance in a small, quiet design that integrates wellMEET THE HP WORKSTATION FAMILYHP Z Workstation family“We decided to try the Z-series based on the performance rating ofthe CPUs. According tothe ratings we’ve seen, you get a 30% to 40% increase in performance for a very small difference in price. Ourstudents and faculty aredefinitely pleased with the speed and graphics capability.”–Emil Henry, manager of information systems, College of Engineering and Computer Science, California State University, Northridge, Calif.Type of software3Subject/departmentArea of useSuggested HP Workstation HP Z200 WorkstationSAmPle AreAS And APPlicATionS for HP WorkSTATionSHP Workstations don’t stop at the hardware—they also include a range of software and toolsdesigned to help higher education markets provide a complete technology solution.HP STABLE & CONSISTENT OFFERINGSWith HP Stable & Consistent Offerings, you can choose long lifecycle hardware and software components when you customize selectHP Workstations, with the assurance that they’ll last alongside it, from launch until retirement (approximately three years). Choose from a range of options that include: • Processors• Graphics cards • Hard drives• Optical drives • Memory• Operating systems • PeripheralsHP REMOTE GRAPHICS SOFTWAREHP Remote Graphics Software (RGS) is an advanced 3D screen-sharing utility that allows remote access and workstation sharing. For engineering and design students looking to speed the design process, HP RGS enables real-time sharing of high-resolution imagery so creativeteams from multiple remote sites can collaborate instantly, regardless of remote distances. For more information see the HP Remote Graphics Software Users Guide at /go/rgs .HP PERFORMANCE ADVISORHP Performance Advisor makes it easy to stay up and running and helps identify trouble spots for your IT staff. The tool monitors system resource usage over time toidentify bottlenecks and provides a detailed configuration report so your IT department can easily see what’s on each system. For more information, visit /go/performanceadvisor .HP SUPPORT ASSISTANTHP Support Assistant makes it easier than ever to own and use an HP Workstation. It comes pre-installed on every HP Workstation with the latest version of Windows ® 76 and offers automatic updates, reminders, and self-service utilities to help resolve common issues.HP offers higher education a full range ofHP Workstation hardware, software, tools, and solutions so you can provide the best technology available to your best and brightest. For more information, please visit /go/wseducation .HP WORKSTATION EXTRASThis is the official AutoCAD certification label*authorized by Autodesk. All HP Z Workstations are tested and certified for AutoCAD.For more information about HP Workstations for higher education,please visit /go/wseducation© Copyright 2010-2011 Hewlett-Packard Development Company, L.P . The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Intel, Core, and Xeon aretrademarks of Intel Corporation in the U.S. and other countries. Autodesk, AutoCAD and the Certified for AutoCAD 2011 logo are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. ENERGY STAR is a registered mark owned by the U.S. government. Adobe is a trademark of Adobe Systems Incorporated. 4AA3-1091ENW, March 2011Screen images courtesy of Autodesk and Landmark.1 Intel Turbo Boost technology requires a PC with a processor with Intel Turbo Boost capability. Intel Turbo Boost performance varies depending on hardware, software, and overall system configuration. See /technology/turboboost for more information.2 The hyper-threading feature is designed to improve performance of multi-threaded software products; please contact your software provider to determine software compatibility. Not all customers or software applications will benefit from the use of hyperthreading. Go to /info/hyperthreading/ for more information including which processors support HT Technology.3 M ulti-core technologies are designed to improve performance of multithreaded software products and hardware-aware multitasking operating systems and may require appropriate operating system software for full benefits. Not all customers or software applications will necessarily benefit from use of these technologies.4 64-bit computing on Intel® architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers and applications enabled for Intel ® 64architecture. Processors will not operate (including 32-bit operation) without an Intel 64 architecture-enabled BIOS. Performance will vary depending on your hardware and software configurations. See /info/em64t for more information.5 H D content required to view HD images. Internet access required. Performance dependent on network latency and image frame content.6 W indows 7 systems may require upgraded and/or separately purchased hardware and/or a DVD drive to install the Windows® 7 software and take full advantage of Windows 7 functionality. See /windows/windows-7 for details.* Certification based on testing of specific system configurations. Requires a certified graphics card be installed. See /acad2011graphics for a complete list of certified graphics cards.。

General DescriptionThe MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX6348 microprocessor (µP) supervisory circuits moni-tor the power supplies in µP and digital systems. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 2.5V, 3V, 3.3V, and 5V powered circuits.These circuits perform a single function: they assert a reset signal whenever the V CC supply voltage declines below a preset threshold, keeping it asserted for at least 100ms after V CC has risen above the reset threshold.The only difference between the devices is their output.The MAX6326/MAX6346 (push-pull) and MAX6328/MAX6348 (open-drain) have an active-low reset output.The MAX6327/MAX6347 have an active-high push-pull reset output. All of these parts are guaranteed to be in the correct state for V CC down to 1V. The reset compara-tor is designed to ignore fast transients on V CC . Reset thresholds are factory-trimmable between 2.2V and 4.63V, in approximately 100mV increments. Twenty-one standard versions are available. Contact the factory for availability of nonstandard versions.Ultra-low supply currents (1µA max for the MAX6326/MAX6327/MAX6328) make these parts ideal for use in portable equipment. All six devices are available in space-saving SOT23 and SC70 packages.ApplicationsComputers Intelligent Instruments Controllers AutomotiveCritical µP and µC Portable/Battery-Powered Power MonitoringEquipmentFeatures♦Ultra-Low 1µA (max) Supply Current (MAX6326/MAX6327/MAX6328)♦Precision Monitoring of 2.5V, 3V, 3.3V, and 5V Power-Supply Voltages♦Reset Thresholds Available from 2.2V to 4.63V ♦Fully Specified Over Temperature♦100ms (min) Power-On Reset Pulse Width ♦Low Cost♦Available in Three Versions: Push-Pull RESET ,Push-Pull RESET, and Open-Drain RESET ♦Power-Supply Transient Immunity ♦No External Components ♦3-Pin SC70/SOT23 Packages♦Pin Compatible with MAX803/MAX809/MAX810MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX63483-Pin, Ultra-Low-Power SC70/SOTµP Reset Circuits________________________________________________________________Maxim Integrated Products 1Pin Configuration19-1294; Rev 4; 12/05†The MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX6348 are available in factory-set V CC reset thresholds from 2.2V to 4.63V, in approximately 0.1V increments. Choose the desired reset-threshold suffix from Table 1 and insert it in the blank spaces following “R.”There are 21 standard versions with a required order increment of 2500 pieces. Sample stock is gen-erally held on the standard versions only (see the SelectorGuide). Required order increment is 10,000 pieces for nonstan-dard versions (Table 2). Contact factory for availability. All devices available in tape-and-reel only.Devices are available in both leaded and lead-free packaging.Specify lead-free by replacing “-T” with “+T” when ordering.Selector Guide appears at end of data sheet.For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at .M A X 6326/M A X 6327/M A X 6328/M A X 6346/M A X 6347/M A X 63483-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits 2_______________________________________________________________________________________ABSOLUTE MAXIMUM RATINGSELECTRICAL CHARACTERISTICS(V CC = full range, T A = -40°C to +85°C, unless otherwise noted. Typical values are at T A = +25°C and V CC = 3V.) (Note 1)Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Terminal Voltage (with respect to GND)V CC ...........................................................................-0.3V to +6V RESET, RESET (push-pull).........................-0.3V to (V CC + 0.3V)RESET (open drain)..................................................-0.3V to +6V Input Current (V CC ).............................................................20mA Output Current (RESET, RESET ).........................................20mA Rate of Rise (V CC )...........................................................100V/µsContinuous Power Dissipation (T A = +70°C)3-Pin SC70 (derate 2.7mW/°C above +70°C)...............174mW 3-Pin SOT23 (derate 4mW/°C above +70°C)................320mW Operating Temperature Range ...........................-40°C to +85°C Storage Temperature Range.............................-65°C to +150°C Lead Temperature (soldering, 10s).................................+300°CNote 1:Overtemperature limits are guaranteed by design and not production tested.MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX63483-Pin, Ultra-Low-Power SC70/SOTµP Reset Circuits_______________________________________________________________________________________3__________________________________________Typical Operating Characteristics(T A = +25°C, unless otherwise noted.)00.30.20.10.40.50.60.70.80.91.0-400-2020406080SUPPLY CURRENT vs. TEMPERATURE TEMPERATURE (°C)S U P P L Y C U R R E N T(µA)050100150200-400-2020406080POWER-DOWN RESET DELAY vs. TEMPERATURE TEMPERATURE (°C)R E S E T D E L A Y(µs)130150140160170180190200210-400-2020406080POWER-UP RESET TIMEOUT vs. TEMPERATURE M A X6326-03TEMPERATURE (°C)P O W E R-U P R E S E T T I M E O U T(m s)500011001000MAXIMUM TRANSIENT DURATION vs. RESET THRESHOLD OVERDRIVE (SC70)100300400200M A X6326-04RESET THRESHOLD OVERDRIVE,V TH - V CC (mV)M A X I M U M T R A N S I E N T D U R A T I O N(µs)10______________________________________________________________Pin DescriptionM A X 6326/M A X 6327/M A X 6328/M A X 6346/M A X 6347/M A X 63483-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits 4___________________________________________________________________________________________________Applications InformationInterfacing to µPs with Bidirectional Reset PinsSince the RESET output on the MAX6328/MAX6348 is open drain, these devices interface easily with micro-processors (µPs) that have bidirectional reset pins,such as the Motorola 68HC11. Connecting the µP supervisor’s RESET output directly to the microcon-troller’s (µC’s) RESET pin with a single pull-up resistor allows either device to assert reset (Figure 1).Negative-Going V CC TransientsIn addition to issuing a reset to the µP during power-up,power-down, and brownout conditions, these devices are relatively immune to short-duration, negative-going V CC transients (glitches).The Typical O perating Characteristics show the Maxi-mum Transient Duration vs. Reset Threshold Overdrive graph, for which reset pulses are not generated. The graph shows the maximum pulse width that a negative-going V CC transient may typically have when issuing a reset signal. As the amplitude of the transient increas-es, the maximum allowable pulse width decreases.Figure 1. Interfacing to µPs with Bidirectional Reset PinsTable 1. Factory-Trimmed Reset Thresholds ‡‡Factory-trimmed reset thresholds are available in approximately 100mV increments with a 1.5% room-temperature variance.MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX63483-Pin, Ultra-Low-Power SC70/SOTµP Reset Circuits_______________________________________________________________________________________5Table 1. Factory-Trimmed Reset Thresholds‡(continued)‡Factory-trimmed reset thresholds are available in approximately 100mV increments with a 1.5% room-temperature variance.Table 2. Device Marking Codes and Minimum Order IncrementsM A X 6326/M A X 6327/M A X 6328/M A X 6346/M A X 6347/M A X 63483-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits 6__________________________________________________________________________________________________________Chip InformationTRANSISTOR COUNT: 419Table 2. Device Marking Codes and Minimum Order Increments (continued)Selector Guide(standard versions*)*Sample stock is generally held on all standard versions.Package Information MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX63483-Pin, Ultra-Low-Power SC70/SOTµP Reset Circuits_______________________________________________________________________________________ (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to /packages.)7M A X 6326/M A X 6327/M A X 6328/M A X 6346/M A X 6347/M A X 63483-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.8_____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600©2005 Maxim Integrated ProductsPrinted USAis a registered trademark of Maxim Integrated Products, Inc.Package Information (continued)(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to /packages .)。

LM-380A微电脑线号打印字机操作说明书●使用前，请先阅读本说明书。

●请妥善保管此说明书。

●未经许可，严禁转载本书内容。

●本书相关之内容若有修改，恕不另行通知。

●本公司对本说明书之内容，拥有最后解释权。

【Microsoft、Windows、Excel等，是微软公司在美国和其它国家的注册商标】1. 请仔细阅读1-1 前言感谢您购买MAX LETATWIN LM-380A。

本机器具备多样化的设计功能，可在贴纸和套管上印字。

特别是在大量的贴纸和套管的印字上，有其独特的功能。

请妥善保管机器和阅读本说明书，接下来的介绍，将使您能完全的操作本机器。

1-2 使用上的注意■指示图本操作说明书用不同的符号显示，来帮助您安全和正确的使用LM-380A线号印字机。

在本节里将说明，这些符号所代表的意义。

警告如果不注意此警告，可能会导致使用者受到伤害。

注意如对此注意不加留意，将使操作人员受到伤害，损失您的设备，或流失所输入的资料。

表示机器出状况，需要修理，或要重新设定等，以使本机器能顺利的运作。

帮助您了解工作的要点，或给予一些指导。

★功能之注意事项。

■符号: 需注意事项。

:〝不能做的事〞。

在此显示中，您要特别留心。

:〝必须做的事〞。

此符号出现时，您必须跟随他的指示去做。

警告•千万别拆解或重组机器，这可能会引起火灾、电击或其它问题。

•请勿插入外来物品到本机器里面，如手指、笔、电线等。

这可能会损坏机器，或引起火灾。

•请使用正确的电压，否则将导致机器的损坏。

•请勿将重物至于电源线上，这会容易导致火灾或电线走火。

•请勿用湿的手去插或拔插头，此动作会引起电击。

•请勿洒水或化学药剂在机器上，以避免机器损坏、引起火灾或电击。

万一液体进入机器时，请立即切断电源，并联络您的经销商。

•机器故障时请勿再使用。

如机器在故障时使用，比如有异声或异味时，这可能会引起火灾或触电。

此时请立即切断电源，并联络您的经销商。

注意•资料不能保证永久储存在记忆卡或机器的内部存储器。