creep of copper 4-300k

ABV101............Accumulator Bleed-Down Valve......................MV15-MV17 CDP161............Double P.O. Check Valves..................................LH85-LH86 CDPH103..........Double P.O. Check Valves..................................LH83-LH84 CP044P............Single P.O. Check Valves...................................LH46-LH48 CP074P............Single P.O. Check Valves...................................LH49-LH51 CP084P............Single P.O. Check Valves...................................LH52-LH54 CPC101P..........Pilot-to-Close Check Valves...............................LH64-LH66 CPC161P..........Pilot-to-Close Check Valves...............................LH67-LH69 CPD084P..........Double P.O. Check Valves..................................LH80-LH82 CPH064P..........Single P.O. Check Valves...................................LH55-LH57 CPH104P..........Single P.O. Check Valves...................................LH58-LH60 CPH124P..........Single P.O. Check Valves...................................LH61-LH63 CS041B............Shuttle Valves....................................................LH87-LH89 CSH101B..........Shuttle Valves....................................................LH90-LH92 CSP161............Single P.O. Check Valves...................................LH78-LH79 CSPH103..........Single P.O. Check Valves...................................LH76-LH77 CV041P............Check Valves.........................................................LH1-LH3 CV081P &091P.................Check Valves.........................................................LH4-LH6 CV082P............Check Valves.........................................................LH7-LH9 CV101P............Check Valves.....................................................LH10-LH12 CV102P............Check Valves.....................................................LH13-LH15 CV103P............Check Valves.....................................................LH16-LH18 CVH061P..........Check Valves.....................................................LH25-LH27 CVH071P..........Check Valves.....................................................LH28-LH30 CVH081P &091P.................Check Valves.....................................................LH31-LH33 CVH103P..........Check Valves.....................................................LH34-LH36 CVH084P..........Check Valves.....................................................LH37-LH39 CVH104P..........Check Valves.....................................................LH40-LH42 CVH121P..........Check Valves.....................................................LH43-LH45 CVH161P..........Check Valves.....................................................LH19-LH21 CVH201P..........Check Valves.....................................................LH22-LH24 CVO101P..........Vent-to-Open Check Valves...............................LH70-LH72 CVO161P..........Vent-to-Open Check Valves...............................LH73-LH75 DF083...............Sol. Operated, P.C. Proportional Flow Cont...........PV1-PV4 DF092C............Sol. Operated, P.C. Proportional Flow Cont...........PV5-PV8 DF092N............Sol. Operated, P.C. Proportional Flow Cont.........PV9-PV12 DF102C............Sol. Operated, P.C. Proportional Flow Cont.......PV13-PV16 DF102N............Sol. Operated, P.C. Proportional Flow Cont.......PV17-PV20 DF102P............Sol. Operated, P.C. Proportional Flow Cont.......PV21-PV23 DF122...............Sol. Operated, P.C. Proportional Flow Cont.......PV24-PV27 DF161C............Solenoid Operated, Throttle Valves....................PV28-PV31 DF201C............Solenoid Operated, Throttle Valves....................PV32-PV35 DH082..............Pilot Operated, 2-Way Valves............................DC22-DC24 DH103..............Pilot Operated, Directional Valves......................DC25-DC28 DL081..............Manual, Poppet-Type, 2-Way Valves.....................DC1-DC3 DL101..............Manual, Poppet-Type, 2-Way Valves.....................DC4-DC6 DL102..............Manual, Spool-Type, 2-Way Valves.......................DC7-DC9 DL103..............Manual, Spool-Type, 3-Way Valves...................DC10-DC12 DL104..............Manual, Spool-Type, 4-Way Valves...................DC13-DC15 DM103.............Manual, Rotary, 3-Way Valves...........................DC16-DC18 DM104.............Manual, Rotary, 4-Way Valves...........................DC19-DC21 DPR083B..........Sol. Operated, Proportional Pres. Reducing......PV36-PV39 DPR083C..........Sol. Operated, Proportional Pres. Reducing......PV40-PV43 DPR083C30......Sol. Operated, Proportional Pres. Reducing......PV44-PV47 DPR083N.........Sol. Operated, Proportional Pres. Reducing......PV48-PV51 DPR103C..........Sol. Operated, Proportional Pres. Reducing......PV52-PV55DPR104C10......Sol. Operated, Proportional Pres. Reducing......PV56-PV59 DS085..............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC127-DC130 DS086C6Mand 096............Sol., Bi-Directional, Poppet-Type, 2-Way.......DC148-DC151 DS105..............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC131-DC134 DS161..............Solenoid, Poppet-Type, 2-Way Valves...............DC56-DC59 DS162..............Solenoid, Spool-Type, 2-Way Valves.................DC84-DC87 DS123B............Solenoid, Spool-Type, 3-Way Valves.............DC104-DC106 DS163..............Solenoid, Spool-Type, 3-Way Valves.............DC107-DC110 DS201..............Solenoid, Poppet-Type, 2-Way Valves...............DC60-DC63 DS083BP3........Solenoid, Poppet-Type, 3-Way Valves...............DC64-DC67 DSH08D1C.......Solenoid, Poppet-Type, 2-Way Valves...........DC139-DC141 DSH08D6C.......Solenoid, Poppet-Type, 2-Way Valves...........DC145-DC147 DSH081 & 091.Solenoid, Poppet-Type, 2-Way Valves...............DC36-DC39 DSH082 & 092.Solenoid, Spool-Type, 2-Way Valves.................DC72-DC75 DSH083............Solenoid, Spool-Type, 3-Way Valves.................DC92-DC95 DSH084............Solenoid, Spool-Type, 4-Way Valves.............DC115-DC118 DSH085............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC135-DC138 DSH101............Solenoid, Poppet-Type, 2-Way Valves...............DC44-DC47 DSH102............Solenoid, Spool-Type, 2-Way Valves.................DC80-DC83 DSH103............Solenoid, Spool-Type, 3-Way Valves.............DC100-DC103 DSH104............Solenoid, Spool-Type, 4-Way Valves.............DC123-DC126 DSH106C6........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC156-DC159 DSH121............Solenoid, Poppet-Type, 2-Way Valves...............DC52-DC55 DSL08D6C........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC142-DC144 DSL080DC........Soft Seat, Direct Act., Poppet-Type, 2-Way.......DC29-DC31 DSL081 & 091.Solenoid, Poppet-Type, 2-Way Valves...............DC32-DC35 DSL082 & 092.Solenoid, Spool-Type, 2-Way Valves.................DC68-DC71 DSL083............Solenoid, Spool-Type, 3-Way Valves.................DC88-DC91 DSL084............Solenoid, Spool-Type, 4-Way Valves.............DC111-DC114 DSL101............Solenoid, Poppet-Type, 2-Way Valves...............DC40-DC43 DSL102............Solenoid, Spool-Type, 2-Way Valves.................DC76-DC79 DSL103............Solenoid, Spool-Type, 3-Way Valves.................DC96-DC99 DSL104............Solenoid, Spool-Type, 4-Way Valves.............DC119-DC122 DSL106C6........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC152-DC155 DSL121............Solenoid, Poppet-Type, 2-Way Valves...............DC48-DC51 EHVC................Electrohydraulic Valve Controller.......................PV92-PV99 ERV091C..........Solenoid Operated, Proportional P.C.................PV60-PV63 ERV091N..........Solenoid Operated, Proportional P.C.................PV64-PV67 ERV092N..........Solenoid Operated, Proportional P.C.................PV68-PV71 ERV101C..........Solenoid Operated, Proportional P.C.................PV72-PV75 ERV101N..........Solenoid Operated, Proportional P.C.................PV76-PV79 ERV102N..........Solenoid Operated, Proportional P.C.................PV80-PV83 ERV121N..........Solenoid Operated, Proportional P.C.................PV84-PV87 ERV161N..........Solenoid Operated, Proportional P.C.................PV88-PV91 FA101...............Pressure Compensated Flow Control................VC16-VC18 FC101...............Pressure Compensated Flow Control................VC22-VC24 FCP101.............Priority-Type, P.C. Valves...................................VC38-VC40 FCPH121..........Priority-Type, P.C. Valves...................................VC41-VC43 FCR101............Restrictive-Type, P.C. Valves..............................VC29-VC31 FCR121............Restrictive-Type, P.C. Valves..............................VC32-VC34 FCR161............Restrictive-Type, P.C. Valves..............................VC35-VC37 FDC101............Flow Divider/Combiner Valves...........................VC19-VC21 FL101...............Filter Cartridge.....................................................MV7-MV9 FP101...............Priority-Type, P.C. Flow Control Valves..............VC47-VC50 FPR101............Priority-Type, P.C. Flow Control Valves..............VC51-VC53 FR101...............Restrictive-Type, P.C. Flow Control Valves.........VC44-VC46FV101 & 102 .... Flow Control Valves ........................................... VC25-VC28 HLSVH101........Hi-Lo Unloading Valve.....................................MV10-MV12 HP101..............Hand Pump.....................................................MV13-MV14 NV102..............Needle Valves........................................................VC7-VC9 NV161..............Needle Valves....................................................VC10-VC12 NV162..............Needle Valves....................................................VC13-VC15 NVH081............Needle Valves........................................................VC1-VC3 NVH101............Needle Valves........................................................VC4-VC6 Offer of Sale............................................................................................TI15 P10-2*.............Cavity Plugs................................................................MV19 PDS101............Pressure Sensing..............................................PC67-PC69 PDS161............Pressure Sensing..............................................PC70-PC72 PMK101...........Panel Mount Kit..........................................................MV18 PN 812724.......Block Off Plate............................................................MV20 PR103..............Pressure Reducing/Relieving Valves.................PC91-PC93 PRCH101..........Pressure Reducing/Relieving Valves With.........................PC79-PC81PRH081............P.O. Pressure Reducing/Relieving Valves..........PC73-PC75 PRH082............P.O. Pressure Reducing Valves..........................PC94-PC96 PRH101............P.O. Pressure Reducing/Relieving Valves..........PC76-PC78 PRH102............P.O. Pressure Reducing Valves..........................PC97-PC99 PRH121............P.O. Pressure Reducing/Relieving Valves..........PC82-PC84 PRH121V..........P.O. Pressure Reducing/Relieving Valves..........PC85-PC87 PRH122............P.O. Pressure Reducing Valves......................PC100-PC102 PRH161............P.O. Pressure Reducing/Relieving Valves..........PC88-PC90 PRH162............P.O. Pressure Reducing Valves......................PC103-PC105PRS102............Pressure Reducing Spool Valves...................PC106-PC108PRS162............Pressure Reducing Spool Valves...................PC109-PC111 RAH081 & 091.P.O. Relief Valves...............................................PC49-PC51 RAH101............P.O. Relief Valves...............................................PC52-PC54 RAH101V..........P.O. Ventable Relief Valves................................PC55-PC57 RAH121............P.O. Relief Valves...............................................PC58-PC60 RAH161............P.O. Relief Valves...............................................PC61-PC63 RAH201............P.O. Relief Valves...............................................PC64-PC66 RASPH21.........Subplate/Relief Valve...........................................MV1-MV3 RASPH31.........Subplate/Relief Valve...........................................MV4-MV6 RD042..............Direct Acting Relief Valves.....................................PC7-PC9 RD072..............Direct Acting Relief Valves.................................PC13-PC15 RD102..............Direct Acting Relief Valves.................................PC19-PC21 RD163..............Direct Acting Relief Valves.................................PC31-PC33 RDH062............Direct Acting Relief Valves.................................PC10-PC12 RDH081............Direct Acting Relief Valves.....................................PC1-PC3 RDH082............Direct Acting Relief Valves.................................PC16-PC18 RDH083............Direct Acting Relief Valves.................................PC22-PC24 RDH101............Direct Acting Relief Valves.....................................PC4-PC6 RDH103............Direct Acting Relief Valves.................................PC25-PC27 RDH104............Differential Relief Valves With..........................................PC34-PC36 RDCH103.........Direct Acting Relief Valves With..........................................PC28-PC30PC139-PC141 SVCH101..........Sequence Valves w/Free Rev. Flow Check.....PC118-PC120 SVH081............Sequence Valves............................................PC112-PC114 SVH082............P.O. Sequence Valves....................................PC127-PC129 SVH101............Sequence Valves............................................PC115-PC117 SVH102............P.O. Sequence Valves....................................PC130-PC132 SVH121............Sequence Valves............................................PC121-PC12308 & 09............Coils 1/2″ I.D..........................................................CL1-CL2 DF102P &DPR104C10......Coils 1/2″ I.D..........................................................CL3-CL4 10, 12,16 & 20............Coils 5/8″ I.D..........................................................CL5-CL6 12 & 16............Coils 1″ I.D.............................................................CL7-CL8 08 & 09............Unicoils 1/2″ I.D...................................................CL9-CL10 10 & 12............Unicoils 5/8″ I.D.................................................CL11-CL12 08 & 09............Waterproof Coils 1/2″ I.D............................................CL13 10 & 12............Waterproof Coils 5/8″ I.D............................................CL14 Installation Data.........................................................................................TI1 04.....................Two and Three Way Cavity Details..................................TI206.....................Two and Three Way Cavity Details..................................TI307.....................Two and Three Way Cavity Details..................................TI408.....................Two, Three and Four Way Cavity Details...................TI5-TI609.....................Two Way Cavity Detail....................................................TI710.....................Two, Three and Four Way Cavity Details...................TI8-TI9 12.....................Two, Three and Four Way Cavity Details...............TI10-TI11 16.....................Two, Three and Four Way Cavity Details...............TI12-TI13 20.....................Two Way Cavity Detail..................................................TI14 B04-2**...........Single Function, Two Step Bodies.........................VB1-VB2 B04-3**...........Single Function, Three Step Bodies.......................VB3-VB4 B06-2**...........Single Function, Two Step Bodies.........................VB5-VB6 B06-3**...........Single Function, Three Step Bodies.......................VB7-VB8 B07-2**...........Single Function, Two Step Bodies.......................VB9-VB10 B07-3**...........Single Function, Three Step Bodies...................VB11-VB12 B08-2**...........Single Function, Two Step Bodies.....................VB13-VB14 B08-3**...........Single Function, Three Step Bodies...................VB15-VB16 B08-4**...........Single Function, Four Step Bodies.....................VB17-VB18 B09-2**...........Single Function, Two Step Bodies.....................VB19-VB20 B10-2**...........Single Function, Two Step Bodies.....................VB21-VB22 B10-2T**.........Single Function, Two Step Bodies.....................VB23-VB24 B10-3**...........Single Function, Three Step Bodies...................VB25-VB26 B10-3L**.........Single Function, Three Step Bodies...................VB27-VB28 B10-4**...........Single Function, Four Step Bodies.....................VB29-VB30 B12-2**...........Single Function, Two Step Bodies.....................VB31-VB32 B12-3**...........Single Function, Three Step Bodies...................VB33-VB34 B12-4**...........Single Function, Four Step Bodies.....................VB35-VB36 B16-2**...........Single Function, Two Step Bodies.....................VB37-VB38 B16-3**...........Single Function, Three Step Bodies...................VB39-VB40 B16-3S**.........Single Function, Three Step Bodies...................VB41-VB42 B20-2**...........Single Function, Two Step Bodies.....................VB43-VB44 Single Function BodiesCavity DetailsCartridge Valve CoilsSVH122............P.O. Sequence Valves....................................PC133-PC135 SVH161............Sequence Valves............................................PC124-PC126 SVH162............P.O. Sequence Valves....................................PC136-PC138 TR081..............Thermal Relief Valves....................................PC142-PC144 VF101...............Velocity Fuses....................................................VC54-VC56 XR101..............Cross-Over Relief Valves...................................PC37-PC39 XRDH101.........Cross-Over Relief Valves...................................PC40-PC42 XRDH102.........Dual Relief Valves w/Anti-Cavitation Checks......PC43-PC45 XRDH103.........Cross-Over Relief Valves...................................PC46-PC48。

APPLICATION: Most AD Build Lists With Fastram PistonsExcavators: Volvo EC150 (AD80819); Industrial Engines: 1004E-4TW (AD50547, AD80868, AD80879, AD80914)(10)Used When Taper Press Tooling Is Not Available (Machine Taper After Boring To Size) (11)Used With Proper Taper Press ToolingPK-243-M 10/28/2009QTY ITEM # DESCRIPTION LETTERED ITEMSINCLUDED IN KIT1 974468 In-Frame Kit I1 975468 Out-of-Frame Kit O1 976468 Major-Frame Kit M1 977468 Premium Kit (979152 Dual Spring Valve Train Kit Included) P4 4 4 4 4 4 171519 171521 171522 171367 171366 171468 Sleeve & Piston Asb (Grade J-L / 2.7640" Compression Dist) Piston Assembly (Grade J-L / 2.7640" Compression Dist)Piston Assembly (Grade F-H / 2.7677" Compression Dist)Cylinder Liner (Flange/Finished/Fire Dam/4.1035" OD) (1)Cylinder Liner (Flange/Semi-Finished/FD/4.1055" OD) (2)005 Liner ShimP M O I4 171281 Ring Set (1-3.5K 1-2.5 1-4.0)4 4 4 4 271261 271262 271263 271264 STD Rod Bearing (Locating Tangs For Notched R ods) .010 Rod Bearing (Locating Tangs For Notched Rods).020 Rod Bearing (Locating Tangs For Notched Rods).030 Rod Bearing (Locating Tangs For Notched Rods)P M O I1 1 1 1 271161 271162 271163 271164 STD Main Set, wo/Thrust Washers .010 Main Set, wo/Thrust Washers.020 Main Set, wo/Thrust Washers.030 Main Set, wo/Thrust Washers "Additional Sizes (4)"P M O I1 1 1 271119 271125 271126 STD Thrust Washer Set (Offset Lug) .007 Thrust Washer Set (Offset Lug).010 Thrust Washer Set (Offset Lug)P M O I1 1 1 8 371325 371218 371221 371143 Head Gasket Set "Head Gasket - 371155" Valve Cover Gasket (Aluminum Cover)Valve Cover Gasket (Composite Cover)Valve SealP M O I1 1 1 1 371394 371393 371167 371282 Lower Gasket Set wo/Seals Timing Cover Gasket Pan Gasket Set (Cast Pan / Incls 6 Flange Gkt) Pan Gasket (Steel Pan) P M OI1 1 1 371146 371145 371297 Front Crank Seal (Viton Lip Type) (5) Rear Crank Seal, Thru U176356H (Viton Lip Type) (6) Rear Crank Seal & Housing, After U176356H (7) (8)P P M M O O4 4 4 1 271244 271198 271289 271127 Pin Bush, Butt Split Rod (Straight / 1.563" Pin / 1.660" OD) Pin Bush, Fractured Rod (Straight/1.563" Pin/1.698" OD) (10) Pin Bush, Fractured Rod (Taper/1.563" Pin/1.698" OD) (11) Cam Bearing (Finished ID) P P MM8 8 1 771368 771323 771319 Rod Capscrew (Doweled Flat Butt Split/1/2 x 2.766 Hex Hd) Rod Capscrew (Fractured Split / 7/16 x 2.580 12 Pt Head)Head Bolt Kit (22 Bolts)P M (1).010 OS Finished Liner - 171368 (2).020 OS Semi-Finished Liner - 171511 (4).040 - 271165 / .050 - 271166 / .060 - 271167(5)Wear Sleeve-301115 (6)Lip Seal Hsg Gkt-371187 / Wear Sleeve-301143 (7)Wear Sleeve-371366 (8)Not Included In Engine KitsExcavators: Volvo EC150 (AD80819); Industrial Engines: 1004E-4TW (AD50547, AD80868, AD80879, AD80914)(12)Adjusting Screw-471226 / Lock Nut - 571139(13)Rocker Arm Shaft Snap Ring - 471228PK-243-M(14)Includes 2 Bushings - 57114410/28/2009QTY ITEM # DESCRIPTION LETTERED ITEMSINCLUDED IN KIT1 979523 Camshaft Kit C1 979157 Valve Train Kit (High Speed / 45º Intake / Dual Springs)1 979152 Valve Train Kit (High Speed / 30º Intake / Dual Springs)1 571129 Camshaft "Uses 771363 (M12 x 45) Capscrew" C1 271249 Thrust Washer8 571123 Tappet C4 4 4 471129 471116 471126 Exhaust Valve (45º / 37.5MM Hd D ia) Intake Valve (45º / 45.0MM Hd Dia) Intake Valve (30º / 45.0MM Hd D ia) V VV V4 471132 Exhaust Guide V V 4 471131 Intake Guide V V8 471144 Outer Valve Spring (8 Coils / 1.8" Free Length) V V8 471143 Inner Valve Spring (9 Coils / 1.7" Free Length) V V8 471229 Spring Seat (Stepped/.640" ID)16 471146 Keeper (Half) V V4 471288 Ex Seat, Heads w/45º Intake (1.290 x 1.681 x .374 Stepped) 4 471315 Ex Seat, Heads w/30º Intake4 471289 Intake Seat (45º / 1.584x2.019x.285)4 471292 Intake Seat (30º)4 471224 LH Rocker Arm (Adj Screw & Lock Nut Not Included) (12)4 471225 RH Rocker Arm (Adj Screw & Lock Nut Not Included) (12)1 471227 Rocker Arm Shaft (13) "Includes 471176 Plugs"1 571171 Cam Gear (Steel / 56 Teeth)1 571131 Crank Gear (28 Teeth / 1.632" Wide)1 571163 Idler Gear (Steel / 63 Teeth) (14)8 571117 Push Rod1 671115 Oil Pump 1 671176 Oil Pump Idler Gear "Includes Idler Gear Bush - 571124"1 671183 Relief Valve Assembly: AD80819, AD80879, AD809141 671182 Relief Valve Assembly: AD50547, AD808684 671157 Piston Cooling Jet4 671158 Piston Cooling Check Valve1 671181 Oil Cooler: AD80879, AD809141 671149 Oil Cooler: AD50547, AD808681 671175 Oil Cooler: AD808191 771181 Crank Kit (Spline / Lip) "Front Plate & Screws - 771361"4 771352 Connecting Rod (1.563" Pin)1 771379 Cylinder Head Assembly, Intercooled (Deep Valves / 45º Int)1 771366 Cylinder Head Assembly, Intercooled (Deep Valves / 30º Int)1 771359 Expansion Plug Kit (20 Head & Block Plugs)1 871138 Thermostat (2.125" / Bypass)1 871274 Bypass Hose Kit1 871163 Water Pump1 871255 Fuel Pump。

產地：台灣品名型號調性管徑活塞喇叭管備註JTR-300LJTR-300SJTR-600MLJTR-600MSJTR-606MRLJTR-606MRSJTR-1000LJTR-1000SJTR-1010LJTR-1010SJTR-1200LJTR-1200SJTR-1402RLJTR-1402RSJTR-604LJTR-604SJTR-1414RLJTR-1414RSJPT-416LJPT-416BLJPT-416SJCR-520MLJCR-520MSJFH-846GLJFH-846SJSL-132L內管黃銅鍍鉻小管徑，附A.B.S盒JSL-432L JSL-432S JSL-438L 小管徑。

註:JSL-438L特點:1.頸部曲孤線錐型接續管設計2.槍把型握把,可調軟墊拇指掛次中音長號(Tenor Trombone)Bb0.500"黃銅內滑管為鎳合金鍍鉻外滑管為黃銅管黃銅短號(Cornet)Bb富魯格號(Fluegel Horn)Bb0.433"頂彈簧蒙耐合金(Monel)0.460"頂彈簧蒙耐合金(Monel)紅銅 手工吹口管:紅銅製附Bb總調音管黃銅黃銅袖珍小號(Pocket Trumpet)Bb0.460"頂彈簧鎳合金鍍鎳0.461"紅銅 手工單片式吹口管:紅銅製C調小號(C Trumpet)C0.461"頂彈簧蒙耐合金(Monel)黃銅附Bb總調音管0.459"黃銅 半手工附上揚型、直型喇叭管各一只0.459"黃銅 手工單片式傑普特(JUPITER)銅管樂器小號(Trumpet)Bb 0.460"頂彈簧鎳合金鍍鎳黃銅頂彈簧蒙耐合金(Monel)紅銅吹口管:紅銅製JSL-536RLJSL-536RS JSL-636LJSL-636S按鍵次中音長號JVL-528Bb 0.482"三個活塞黃銅中音號(Alto Horn)JAL-456L Eb0.433"底彈簧鎳合金鍍鎳黃銅JBR-462L0.512"底彈簧鎳合金鍍鎳黃銅JBR-762L 0.582"轉閥式黃銅德國式JEP-464L黃銅彎式三個活塞JEP-468L三個活塞JEP-470L 四個右手活塞JEP-570L三個右手，一個左手活塞法國號(Single Horn)JHR-752L F0.472"三個轉閥鍵JHR-852L0.472"JHR-854L0.472"黃銅可拆式JHR-952L 0.472"紅銅轉閥蓋雕花紋JCB-378L0.661"3/4size JCB-382L 0.709"4/4sizeJCB-582L JCB-582SJSH-594L 0.687"黃銅管體銅製JSH-596L 0.669" F.R.P 管體FRP製行進圓號(Marching Mellophone)JMP-450LF 0.462"頂彈簧蒙耐合金(Monel)黃銅行進專用，喇叭口朝前行進法國號(Marching FrenchHorn)JMH-550L Bb 0.469"底彈簧鎳合金鍍鎳黃銅行進專用，喇叭口朝前行進上低音號(Marching Baritone)JBR-560LBb 0.500"底彈簧鎳合金鍍鎳黃銅行進專用，喇叭口朝前行進粗管上低音號(Marching Euphonium)JEP-466L Bb 0.570"底彈簧鎳合金鍍鎳黃銅行進室內共用JCB-380L 0.661"行進室內共用，3/4sizeJCB-384L0.709"行進室內共用，4/4size附注: (1)所有傑普特(JUPITER)銅管樂器皆附有號嘴,活塞油及擦拭布。

7Catalog EPS 5370/USABP Cross-SectionBP Profile, Premium TPU Cap SealParker’s BP profile is a squeeze type, bi-directional piston seal for use in medium to heavy duty hydraulic applications. This seal is primarily designed for linear applications but has been successfully used as a low speed rotary seal. The standard material for this profile is Resilon ® 4304 polyurethane, compound P4304. This is a proprietary Parker polyurethane offering higher wear resistance, extrusion resistance, and extended temperature range. The Resilon 4304 cap is energized using a resilient nitrile elastomer offering low compression set. The BP profile’s geometry provides a fluid reservoir between the two sealing lips which holds system fluid, resulting in reduced breakaway and running friction. The standard style BP profile is designed to retrofit o-ring grooves. The BP profile is easy to install and will resist rolling and twisting in long stroke applications.The BP profile is sold only as an assembly (seal and energizer). See part number nomenclature.Technical DataParkerTemperature Pressure SurfaceStandard Materials Range Range† Speed CapP4304D60 -65°F to +275°F 7,000 psi < 1.6 ft/s (-54°C to +135°C) (482 bar)(0.5 m/s)Energizer A 70A Nitrile-30°F to +250°F (-34°C to +121°C)Alternate Materials: For applications that may require an alternate material, please go to /eps/FluidPower to checkcurrent tooling and part number availability, or contact your local Parker representative.†Pressure Rangewithout wear rings. If used with wear rings, see Table 2-4, page 2-5.Piston Seal BP ProfilePreferred Profile7Table 7-2. BP Profile4-Digit Material Code Example:4304 = 60D Resilon ® 4304Bore Diameter Identifier (O-ring Dash Number*)Example: 334 = 3.000A = 70A Nitrile Gland Dimensions — BP ProfilePlease refer to Engineering Section 2, page 2-8 for surface finish andadditional hardware considerations.Table 7-3. BP Profile — Piston Gland Calculation*For corresponding o-ring dash number, consult Parker O-ring Handbook, Catalog ORD 5700.** If used with wear rings, refer to wear ring piston diameter, see Section 9.Above table reflects recommended cross-sections for bore diameters shown. Alternate cross-sections and additional sizes may be considered. Consult /eps/FluidPower for additional cross-sections and sizes, hardware specifications, and part number availability. Contact your Parker representative for assistance.7Above table reflects recommended cross-sections for bore diameters shown. Alternate cross-sections and additional sizes may be considered. Consult /eps/FluidPower for additional cross-sections and sizes, hardware specifications, and part number availability. Contact your Parker representative for assistance.Catalog EPS 5370/USAPiston SealBP Metric Profile Preferred ProfileBP Profile, Premium TPU Cap SealParker’s metric BP profile is a double-acting, squeeze type, piston seal for use in medium to heavy duty hydraulic applications. Thestandard material combination for the profile’s components are a TPU cap in Resilon ® 4304 polyurethane with improved sliding and high modulus, and a rectangular cross-section NBR elastomer energizer. The BP profile is easy to install on a single part piston. The unique cap design of the BP profile makes the seal insensitive to pressure spikes. The BP profile is sold only as an assembly (seal and energizer).Technical DataStandard Temperature Pressure SurfaceMaterials Range Range† Speed CapP4304D60 -65°F to +275°F 7,000 psi < 1.6 ft/s (-54°C to +135°C) (482 bar)(0.5 m/s)Energizer A 70A Nitrile-30°F to +250°F (-34°C to +121°C)*Dimensions: Dimensions according to ISO 7425-1.†Pressure Range without wear rings. If used with wear rings, see Table 2-4, page 2-5.BP installed in Piston GlandPlease refer to Engineering Section 2, page 2-8 for surface finish and additional hardware considerations.Table 12-4. BP Metric Profile — Gland Dimensions and Part NumberSee Appendix G for tolerances.GCatalog EPS 5370/USAISO Gland TolerancesMetric Tolerances used for Seal Hardware (per ISO 286-2:1988)。

第51卷第5期2020年5月中南大学学报(自然科学版)Journal of Central South University (Science and Technology)V ol.51No.5May 2020基于广义Kelvin 模型的非定常盐岩蠕变模型韩伟民1，闫怡飞2，闫相祯1(1.中国石油大学(华东)储运与建筑工程学院，山东青岛，266580；2.中国石油大学(华东)机电工程学院，山东青岛，266580)摘要：针对川东北油气田盐岩地层普遍出现的套损现象，对该地层段盐岩的蠕变特性进行研究。

用非定常黏壶元件替换广义Kelvin 模型中的线性黏壶元件，建立非定常广义Kelvin 模型；将其与能够描述盐岩稳态蠕变特征的Heard 模型进行串联，构建新的四元件NGKH 盐岩非线性蠕变本构模型，可以描述盐岩的衰减蠕变阶段和稳态蠕变阶段特征。

基于室内三轴蠕变试验结果，利用Levenberg −Marquardt 算法对NGKH 模型蠕变参数进行识别。

基于FLAC 3D 的UDM 接口程序，采用C++编程语言对其进行二次开发；并通过三轴蠕变试验的数值模拟对开发NGKH 模型进行验证。

研究结果表明：NGKH 模型的拟合结果与室内试验结果吻合良好，该蠕变模型能够准确描述盐岩的非线性蠕变特性；通过黏弹性与非线性计算结果，验证了开发NGKH 模型程序的正确性和合理性。

关键词：蠕变本构模型；非定常广义Kelvin 模型；Heard 稳态蠕变模型；二次开发；有限差分法中图分类号：TU45文献标志码：A开放科学(资源服务)标识码(OSID)文章编号：1672-7207（2020）05-1337-13Non-stationary creep model for salt rock based on generalizedKelvin modelHAN Weimin 1,YAN Yifei 2,YAN Xiangzhen 1(1.College of Pipeline and Civil Engineering,China University of Petroleum,Qingdao 266580,China;2.College of Mechanical and Electronic Engineering,China University of Petroleum,Qingdao 266580,China)Abstract:The creep characteristics of salt rock were studied in northeastern Sichuan oil and gas field in view of the casing damage commonly occurring in salt rock formation.A non-stationary generalized Kelvin model was established by replacing the linear viscous component with a nonlinear viscous component.By connecting it with the Heard model,which could describe the steady creep stage of salt rock,a new non-linear four-element NGKH creep constitutive model for salt rock was constructed,which could describe the characteristics of decay creep stage and steady creep stage of salt rock.Based on the results of triaxial creep tests in laboratory,the creep parameters of NGKH model were identified by Levenberg −Marquardt algorithm.The NGKH model wasDOI:10.11817/j.issn.1672-7207.2020.05.018收稿日期：2019−07−14；修回日期：2019−09−18基金项目(Foundation item)：国家自然科学基金资助项目(51804330)；国家科技重大专项(2016ZX05017-003)；中央高校基本科研业务费专项资金资助项目(18CX02154A)(Project(51804330)supported by the National Natural Science Foundation of China;Project(2016ZX05017-003)supported by the National Science and Technology Major Program;Project(18CX02154A)supported by Fundamental Research Funds for the Central Universities)通信作者：闫怡飞，博士，讲师，从事油气安全工程研究；E-mail ：****************第51卷中南大学学报(自然科学版)redeveloped using UDM interface program of FLAC3D with C++programming language,and verified by numerical simulation of triaxial compression tests.The results show that the fitting results of NGKH model are in good agreement with the laboratory test results,and the creep model can accurately describe the non-linear creep characteristics of salt rock.The correctness and rationality of developing NGKH model can be verified by the viscoelastic and non-linear calculation results.Key words:creep constitutive model;non-stationary generalized Kelvin model;Heard steady creep model; secondary development;finite difference method四川盆地作为油气资源的重要赋存地，分布着大量厚度不一的盐岩地层。

稀土元素及其应用铈及其应用发展在稀土这个元素大家族中，铈是当之无愧的“老大哥”。

其一，稀土在地壳中总的丰度为238ppm，其中铈为68ppm，占稀土总配分的28%,居第一位;其二，铈是在发现钇（1794年）九年之后，被发现的第二个稀土元素。

1803年，瑞典化学家伯采利乌斯（J。

J.Berzelius）和他的老师黑新格尔(W。

Hisingerr）在分析瑞典产的Tungsten矿（“重石"之意）时，发现了一种与“钇土"性质十分相似但又完全不同的新元素-“铈土".在他们提出的发现报告中，将其命名为Cerium（铈），以纪念1801年发现的小行星——谷神星（Ceres）。

严格说来，最初发现的“铈土”只能算作是铈的富集物,或者说是与镧镨钕等共生在一起的轻稀土混合氧化物，当时镧镨钕等尚隐藏在“铈土”中未被发现。

但无论如何，在稀土这17个相貌极为相似的孪生兄弟姐妹中，铈最容易辨认。

因为铈有个显著的化学特性，除了象其他稀土元素通常以三价状态存在外，他还会以四价状态稳定存在.这种离子价态的差异性必然会扩大化学性质的差异性，利用这种差异性就能比较容易地把铈同相邻的其他稀土元素分离开来，因而就出现了化学法提铈.这便于化学家们对铈的提取和认识,加上他资源丰富易提取，比其他稀土产品价格便宜，也就使他成为最早有实际用途的稀土.尽管如此，由于化学家们最初被困惑在不断发现新稀土的“迷宫”中，直到发现“铈土”的83年后，才为铈（也是稀土)找到第一个用途-—用作汽灯纱罩的发光增强剂.1886年，奥地利人韦尔斯巴赫（Auer Von Welsbach）发现,将99%的氧化钍和1％的氧化铈加热时，会发出强光，用于煤汽灯纱罩可以大大提高汽灯的亮度。

而汽灯在当时电灯尚未普及的欧洲是照明的主要光源，对于工业生产、商贸和生活至关重要.而18世纪90年代开始，汽灯纱罩的大规模生产,增加了钍和铈需求，有力推动了世界范围内对稀土矿藏的勘察，在巴西和印度陆续发现了大型独居石矿,遂发展成为所谓的独居石工业,也就是早期稀土工业.尽管第一次世界大战后，电灯逐步取代了煤气灯,但铈又不断开拓出新的用途。

C r i m p e r S e l e c t i o n s & G u i d eOriginal Ferrule and Wire Size by Crimper TypeUse this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to following pages for selection and ordering information of crimpers.1.Determine the wire size(s) to be used.2.To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire.3.Based on the ferrule size, choose the crimper type appropriate for use.4.Select the crimper style best suited for your application.AWG mm²E 110.000C A E 0116C K 28C K 29C E 240&C E E 50C E 240&C E E 70C E 240&C E E 95C E 240&C E E 120C E 240&C E E 150C E 240&C E E 185C E 240&C E E 24022.01422.01522.01622.0172.030SINGLE WIRE280.08260.14240.25220.34200.5180.7518116114 2.51241068106164252351502/0703/0954/0120X250MCM 150350MCM 185500MCM 2402x202x0.5X X 2x182x0.75X X 2x162x1.5X X 2x142x2.5XX 2x122x4XX 2x102x6X 2x82x10X 2x62x16XTWIN WIRESHand Crimpers Large Crimpers Pneumatic Crimpers Vise JawsCrimpit F 4Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with or withoutplastic collars. Only one crimping profile for the entire cross-section range.Ferrules:0,5 – 4 mm2(20 – 12 AWG)Twin Ferrules:2 x 0.5 – 2 x 2.5 mm2(2 x 20 – 2 x 14 AWG)Cat. No.: Crimpit F 4Weight 448 gCrimpit F 6 AutoCrimping tool for ferrules (according to DIN 46228 part 1 and 4) with andwithout plastic collars. Feeding from front.Ferrules:0,5 – 6 mm2(20 – 10 AWG)Twin Ferrules:2 x 0.5 – 2 x 2.5 mm2(2 x 20 – 2 x 14 AWG)Cat. No.: Crimpit F 6 AutoWeight 426 gCrimpit F 6 GyraCrimping tool for ferrules (according to DIN 46228 part 1 and 4) with andwithout plastic collars. Rotatable crimp die for feeding from the front or theside.Ferrules:0,14 – 6 mm2(26 – 10 AWG)Twin Ferrules:2 x 0.5 – 2 x 4 mm2(2 x 20 – 2 x 12 AWG)Cat. No.: Crimpit F 6 GyraWeight 428 gCrimperSelectionsCrimpersCrimpit F 6 ENCrimping tool for ferrules (according to DIN 46228 part 1 and 4) with andwithout plastic collars. Crimp conforms to EN 60947-1. Five crimping profilesfor the rated conductor cross-sections. Registration in accordance with VG95211 (Military designation VG 95236 T 14 A 0001).Ferrules:0.25 – 6 mm2(24 – 10 AWG)Twin Ferrules:2 x 0.75 – 2 x 4 mm2(2 x 18 – 2 x 12 AWG)Cat. No.: Crimpit F 6 ENWeight 423 gC r i m p e r S e l e c t i o nsCrimpit F 6 LCrimping tool for ferrules (conforming to DIN 46228 part 1 and 2) with and without insulating collar. Five crimping profiles depending on the wire cross-sections.Ferrules:0.5 – 6 mm 2(20 – 10 AWG)Twin Ferrules:2 x 0.75 – 2 x 4 mm 2(2 x 18 – 2 x 12 AWG)Cat. No.: Crimpit F 6 LWeight 335 gCrimpit F 16Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with andwithout plastic collars. Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections. Registration in accordance with VG 95211 (Military designation VG 95236 T 14 A 0002).Ferrules:6 – 16 mm 2(10 – 6 AWG)Cat. No.: Crimpit F 16Weight 418 gCrimpit F 16 LCrimping tool for ferrules (according to DIN 46228 part 1 and 4) with andwithout plastic collars. Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections.Ferrules:6 – 16 mm 2(10 – 6 AWG)Cat. No.: Crimpit F 16 LWeight 380 gCrimpit F 25 LCrimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules.Ferrules:6 – 25 mm 2(10 – 4 AWG)Twin Ferrules:2 x 4 – 2 x 10 mm 2(2 x 12 – 2 x 8 AWG)Cat. No.: Crimpit F 25 L Weight 540 gCrimpersC r i m p e r S e l e c t i o nsCrimpit F 50 LCrimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules.Ferrules:35 – 50 mm 2(2 – 1 AWG)Twin Ferrules:2 x 16 mm 2(2 x 6 AWG)Cat. No.: Crimpit F 50 LWeight 540 gCrimpit F MultiMulti-function tool. Stripping and cutting of wires. Crimping tool for insulated belt-strip ferrules according to DIN 46228.Cross-section:0.5 – 2,5 mm 2(20 – 14 AWG)Ferrules:0.5 – 2.5 mm 2(20 – 14 AWG)Cat. No.: Crimpit F Multi Weight 260 gUL Crimper photos are supplied by Zoller & Fröhlich GmbH.For technical and ordering information regarding Ferrule Crimping Machines please contact Altech.CrimpersFerrule Crimping MachinesUniversal Ferrule Crimpers for Original FerrulesFront and Side Conductor EntryCrimpers work with a wide range of insulated and uninsulated ferrule sizes. Universal Ferrule Crimpers are offered to crimp different ferrule and wire size ranges up to 500MCM ).•Positive ratcheting with spring return • Trapezoidal crimp geometry •Comfort grip plastic handle • Hardened steel frameLarger Ferrule CrimpersIndividual crimp cavities conform to industry standard insulated and uninsulated ferrules from 1-500MCM AWG 50-500mm 2)•Positive ratcheting with spring return • Trapezoidal crimp geometry •Comfort grip plastic handle • Hardened steel frameUniversal Ferrule Crimper Universal Ferrule CrimperUniversal Ferrule Crimper Part No.Wire/Ferrule AWG mm 2E110.00026 - 100.14 - 6Replacement Spring Set:185140008Handle Spring Set 318001002Rachet SpringPart No.Wire/Ferrule AWG mm 200612228 - 60.08 -16Part No.Wire/Ferrule AWG mm 20061488-1/010 - 50Vise Mount Ferrule CrimperLarge Ferrule CrimperE008878CE 24022.0302/0-250 70 - 150MCMCrimping Die-Sets Sold SeperatelyLighter DutyFerrule Crimping PliersHandle Only without i ie Set 008883CE E1204/0AWG 120009204CE E150250MCM 250008884CE E185350MCM 350008885CE E240500MCM500mm 20061491/0-3/050 - 95mm 2mm 2mm 2Ferrule Crimping Pliers with Ratched Cycle Part No. For Wire SizesFerrule Crimping Pliers without Ratched Cycle Part No. For Wire SizesCrimpit 05 26-20 AWG (0.14-0.5 mm 2)Crimpit 2.4 20-14 AWG (0.5-2.5 mm 2)Pneumatic Crimping T ool for Original FerrulesAltech's pneumatic crimping tools speed the crimping process ofinsulated or uninsulated ferrules for a wide range of wire sizes up to 8 AWG.Altech pneumatic crimpers are simple and easy to use. Just install the ferrule over the end of the stripped wire and insert it into either the front or side tool opening. Then touch the actuating lever or push the foot switch pedal to initiate the crimp cycle. Once the head closes it will automatically reopen after crimping. The resulting crimp features a compact trapezoidal cross section which is mechanically very strong and provides a large surface to insure a highly efficient electrical contact.Crimp ferrules efficiently and economically. A unique dual crimping head provides convenient front or side wire entry, allowing crimping from multiple positions. This features makes crimping in tight places simple.Choose either lever actuated, hand held units or hands-free foot switch operated table top models, in two basic tool sizes.Hand held models feature a flexible coil air-hose with 1/4" NPT interchange connector for quick hook-up with a standard push-to-connect coupler.The table top units also include a flexible coil air hose to the foot switch and a 1/4" NPT interchange located on the foot switch for one hand push-to-connect supply hook-up. They feature a sturdy metal base with integral table clamp and dual storage trays for quick access to the ferrule supply. The air release port on the foot switch has been quieted with a sintered bronze air silencer. The foot switch has a metal frame and a tough fiberglass shroud. Its spring return pedal provides for short actuating cycles.Optional items for the hand held crimper include a counterbalance for maximum control and a magnetic holder for storage.•Operates on 60 - 90 psi air supply •Crimp insulated and uninsulated ferrules•Trapezoidal crimp geometry •Flexible coil air hose with 1/4" NPT interchange•Metal tool body and base •Hardened steel crimp headWire/ Ferrule Size Tool Wt. Std.ToolAWG mm 2 Cat. No. g (lbs.) Pack Hand Held Crimper with Actuating Lever24-14 0.25-2.5 22.014 430 (.95) 1Crimp Insulated Ferrules and Uninsulated Ferrules Hand Held Crimper with Actuating Lever12-8 4-10 22.015 430 (.95) 1Crimp Insulated Ferrules and Uninsulated FerrulesTable Top Crimper with Foot Switch and Storage Trays24-14 0.25-2.5 22.016 1000 (2.20) 1Crimp Insulated Ferrules and Uninsulated Ferrules Table Top Crimper with Foot Switch and Storage Trays12-8 4-10 22.017 1000 (2.20) 1Crimp Insulated Ferrules and Uninsulated Ferrules Magnetic Mounting Holder22.018 --- 1for hand held pneumatic crimpers Counterbalance22.019 --- 1for hand held pneumatic crimpersC r i m p e r S e l e c t i o n s。

Media PartnerPhotonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747 12 Photonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747SPIE Europe thanks the following sponsorsfor their generous supportAttendee Pens Stand #511www.micos.wsCoffee Breaks Stand #420www.klastech.deConference Bags Stand #Exhibitor Lounge Stand #Lanyards Stand #Pastries Stand #511www.micos.wsVertical Banner Stand #231www.hamamatsu.frExhibitor list as of 3 March 2008.AMA Association for Sensor Technology. . . . #209A.T. Wall Company. . . . . . . . . . . . . . . . . . . . . #224AFOP - French Optics and PhotonicsManufacturers Association . . . . . . . . . . . . #124AHF analysentechnik AG . . . . . . . . . . . . . . . . #316Alcatel Thales III V Lab. . . . . . . . . . . . . . . . . . #329AT -Fachverlag GmbH. . . . . . . . . . . . . . . . . . . #534Avantes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #232Becker & Hickl GmbH . . . . . . . . . . . . . . . . . . #405Bookham . . . . . . . . . . . . . . . . . . . . . . . . . . . . #317Breault Research Organization. . . . . . . . . . . . #117Brush Ceramic Products . . . . . . . . . . . . . . . . #104Carl Hanser Verlag . . . . . . . . . . . . . . . . . . . . . #530Cedrat Technologies. . . . . . . . . . . . . . . . . . . . #118CEIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #323CILAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #416Conerefringent Optics SL. . . . . . . . . . . . . . . . #508Crystal Fibre. . . . . . . . . . . . . . . . . . . . . . . . . . #306CST - Computer Simulation Technology . . . . #226CVI Melles Griot Ltd. . . . . . . . . . . . . . . . . . . . #507Draka . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #230EDP Sciences. . . . . . . . . . . . . . . . . . . . . . . . . #532EKSPLA Co.. . . . . . . . . . . . . . . . . . . . . . . . . . #330Electro Optics Magazine . . . . . . . . . . . . . . . . #430Consortium. . . . . . . . . . . . . . . . . . . . . . . . . . . #331ePIXnet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #431Epner Technology, Inc.. . . . . . . . . . . . . . . . . . #423EQ Photonics GmbH . . . . . . . . . . . . . . . . . . . #223ET Enterprises Ltd . . . . . . . . . . . . . . . . . . . . . #328European Optical Society. . . . . . . . . . . . . . . . #536EuroPhotonics . . . . . . . . . . . . . . . . . . . . . . . . #100Fibercore Ltd.. . . . . . . . . . . . . . . . . . . . . . . . . #515Fibercryst . . . . . . . . . . . . . . . . . . . . . . . . . . . . #426FiberTech Optica Inc.. . . . . . . . . . . . . . . . . . . #415Fischer Connectors . . . . . . . . . . . . . . . . . . . . #122Flexible Optical BV. . . . . . . . . . . . . . . . . . . . . #514FRAMOS GmbH. . . . . . . . . . . . . . . . . . . . . . . #106Frank Optic Products GmbH . . . . . . . . . . . . . #105Fraunhofer Heinrich Hertz Institut . . . . . . . . . #321Fujian CASTECH Crystals, Inc. . . . . . . . . . . . #501Gorman-Rupp Industries . . . . . . . . . . . . . . . . #413GWU-Lasertechnik GmbH . . . . . . . . . . . . . . . #501Hamamatsu . . . . . . . . . . . . . . . . . . . . . . . . . . #231HC Photonics Corp . . . . . . . . . . . . . . . . . . . . #501Heptagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . #521HOLOEYE Photonics AG . . . . . . . . . . . . . . . . #309HORIBA Jobin Yvon SAS. . . . . . . . . . . . . . . . #327id Quantique SA. . . . . . . . . . . . . . . . . . . . . . . #405Impex HighTech GmbH . . . . . . . . . . . . . . . . . #411Innolume GmbH. . . . . . . . . . . . . . . . . . . . . . . #115Institut d’Optique Graduate School . . . . . . . . #437International Society for Stereology. . . . . . . . #529iXFiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #126KERDRY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . #120Kimoga Material Technology Co., Ltd.. . . . . . #520KLASTECH. . . . . . . . . . . . . . . . . . . . . . . . . . . #420Laser Components GmbH. . . . . . . . . . . . . . . #220Laser Focus World . . . . . . . . . . . . . . . . . . . . . #414Laser Zentrum Hannover e.V . (LZH). . . . . . . . #505LEONI Fiber Optics GmbH. . . . . . . . . . . . . . . #406Leukos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #123LINOS Photonics France . . . . . . . . . . . . . . . . #307Lovalite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #121Lumera Laser GmbH . . . . . . . . . . . . . . . . . . . #310Lumerical Solutions, Inc. . . . . . . . . . . . . . . . . #121M.C.S.E.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . #128Mad City Labs, Inc. . . . . . . . . . . . . . . . . . . . . #214Materials Today . . . . . . . . . . . . . . . . . . . . . . . #435Menlo Systems GmbH. . . . . . . . . . . . . . . . . . #517Exhibitor ListPhotonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 47473T Advertiser Index Alcatel Thales III-V Lab. . . . . . . . . . . . . . . . . . . . . . . . . . . p. 11CVI Melles Griot Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . Cover 4ET Enterprises Ltd.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 23EPIC—European Photonics Industry Consortium . . . . . . p. 13KLASTECH—Karpushko Laser Technologies . . . . . . . . . p. 19LINOS Photonics France . . . . . . . . . . . . . . . . . . . . . . . . . p. 17Photoniques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 5RSoft Design Group. . . . . . . . . . . . . . . . . . . . . . . . . . . Cover 2Space Light srl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 21Exhibition Floor PlanMesse Stuttgart . . . . . . . . . . . . . . . . . . . . . . . #524MICOS GmbH . . . . . . . . . . . . . . . . . . . . . . . . #511Nature Publishing Group . . . . . . . . . . . . . . . . #208NEMO (Network of Excellence onMicro-Optics). . . . . . . . . . . . . . . . . . . . . . . #217New Focus, Inc. . . . . . . . . . . . . . . . . . . . . . . . #317Newport Spectra-Physics . . . . . . . . . . . . . . . #205NEYCO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #212NIL Technology. . . . . . . . . . . . . . . . . . . . . . . . #125NP Photonics . . . . . . . . . . . . . . . . . . . . . . . . . #501Nufern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #428NuSil Technology . . . . . . . . . . . . . . . . . . . . . . #525Ocean Optics . . . . . . . . . . . . . . . . . . . . . . . . #110OLLA Project . . . . . . . . . . . . . . . . . . . . . . . . . #429Omega Optical, Inc.. . . . . . . . . . . . . . . . . . . . #107OpTIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #333Optics & Laser Europe . . . . . . . . . . . . . . . . . . #312Optics Pages . . . . . . . . . . . . . . . . . . . . . . . . . #527OptiGrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . #510Optima Research . . . . . . . . . . . . . . . . . . . . . . #131OptoIndex. . . . . . . . . . . . . . . . . . . . . . . . . . . . #531Opton Laser International. . . . . . . . . . . . . . . . #130Optronis GmbH . . . . . . . . . . . . . . . . . . . . . . . #216OXXIUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #304Phoenix BV. . . . . . . . . . . . . . . . . . . . . . . . . . . #315Photon Design . . . . . . . . . . . . . . . . . . . . . . . . #204Photonex 2008. . . . . . . . . . . . . . . . . . . . . . . . #527Photonic Cleaning Technologies . . . . . . . . . . #421Photonics 4 Life - Network of Excellence . . . #427Photonics Spectra - Laurin Publishing. . . . . . #100Photonik Zentrum Hessen in Wetzlar AG. . . . #222Physik Instrumente (PI) GmbH & Co.. . . . . . . #308Point Source. . . . . . . . . . . . . . . . . . . . . . . . . . #113Quantel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #305Raicol Crystals Ltd. . . . . . . . . . . . . . . . . . . . . #206Rhenaphotonics Alsace . . . . . #533, 535, 537, 539Royal Society of Chemistry . . . . . . . . . . . . . . #541RSoft Design Group. . . . . . . . . . . . . . . . . . . . #320RSP Technology BV . . . . . . . . . . . . . . . . . . . . #424Santec Europe Ltd.. . . . . . . . . . . . . . . . . . . . . #409Scientec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #412SEDI Fibres Optiques. . . . . . . . . . . . . . . . . . . #313SEMELAB PLC. . . . . . . . . . . . . . . . . . . . . . . . #109Sill Optics GmbH & Co., KG. . . . . . . . . . . . . . #221SIOF-Italian Society of Optics and Photonics #516Space Light srl . . . . . . . . . . . . . . . . . . . . . . . . #518Spectroscopy Magazine. . . . . . . . . . . . . . . . . #433SphereOptics GmbH . . . . . . . . . . . . . . . . . . . #504Spiricon GmbH. . . . . . . . . . . . . . . . . . . . . . . . #419Springer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #211Stanford Computer Optics GmbH . . . . . . . . #114bTaylor & Francis - Contemporary Physics . . . #528Taylor & Francis - Fiber and Integrated Optics #528Taylor & Francis - Informa UK Ltd.. . . . . . . . . #528Taylor & Francis - International Journal ofOptomechatronics. . . . . . . . . . . . . . . . . . . #528Taylor & Francis - Journal of Modern Optics . #528THALES Laser . . . . . . . . . . . . . . . . . . . . . . . . #506The Institution of Engineering andTechnology (IET) . . . . . . . . . . . . . . . . . . . . #425Thorlabs GmbH . . . . . . . . . . . . . . . . . . . . . . . #517TSP Diffusion . . . . . . . . . . . . . . . . . . . . . . . . . #417UCM AG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . #116Unice E-O Services Inc.. . . . . . . . . . . . . . . . . #422Universal Photonics, Inc. . . . . . . . . . . . . . . . . #207VTT Technical Research Centre of Finland. . . #129Wiley-VCH GmbH & Co. KGaA . . . . . . . . . . . #523Xiton Photonics GmbH. . . . . . . . . . . . . . . . . . #501XLITH GmbH . . . . . . . . . . . . . . . . . . . . . . . . . #432Yole Développement . . . . . . . . . . . . . . . . . . . #225ZODIAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #322Photonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747 5The French magazine specializing in Optics-Photonics Photoniques :the magazine of theFrench Optical CommunityPhotoniques,magazine of the French OpticalSociety,establishes links and partnerships betweenall the entities working in Optics-Photonics :at national level with AFOP (French ManufacturersAssociation in Optics and Photonics)and in eachregion of France.Photoniques :The source of information for all the professionals in thefield of Optics-Photonics in France.In each issue :industry news,technical articles written by specialists,new products…A useful and efficient circulation :7500copiesAfter 7years of existence,cooperation and networking withthe specialists of the optic world in France,Photoniques hasbuilt a large qualified database of potential users :researchers,technicians,engineers and managers,fromindustry such as communications,industrial vision,lasers,test and measurements,imaging/displays…Are you interested in the French optics and photonics markets?Photoniques is your partner!How to keep you informed about Optics-Photonics in France?Become a Photoniques reader!123For additionnal information,contact:Olga Sortais :+33134042144o.sortais@ to request an issue of Photoniques and a media kit6 Photonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747As a new addition to Photonics Europe, the Industry PerspectivesProgramme will provide a series of executive briefi ngs coveringkey technologies and sectors.Come hear key members of Europe’s photonics industrydiscuss their successes, future plans and the way in which theyintend to maximize their market penetration and growth. Hearreviews of the European Innovation landscape highlightinggeographical areas of strengths in areas such as business R&D,knowledge transfer and demonstrate the outcomes from recentsuccessful European-funded industry programmes.Industry Perspectives Programme Included with Conference registration.Individual Sessions can be purchased at the Cashier. Individual sessions, €100. The sessions will deliver a strategic perspective into each application area, allowing you to uncover and confirm the future prospects for your business. Benchmark your aspirations for your business and technology against some of Europe’s leading companies and engage with them as a potential supplier or partner. You will hear presentations from Philips, Audi, PCO, Coherent Scotland, GlaxoSmithKline, Carl Zeiss, Yole Development, Koheras and Fraunhofer on their successes and strategic priorities. Tuesday 8 April Morning SessionPhotovoltaics10.15 to 10.45 hrs.Photovoltaics - Market and Technology TrendsGaëtan Rull, Market Analyst for New Energy Technologies,Yole Développement 10.45 to 11.15 hrs.High Throughput Manufacturing for BulkHeterojunction PVsMarkus Scharber, Head of Materials Group, Konarka 11.15 to 11.45 hrs.Managing JGrowth in the Production of Thin Films(To be confi rmed.)Dr. Immo Kotschau, Director of Research and Development,Centrotherm GmbH 11.45 to 12.30 hrs.End to End Mass Production of Silicon Thin FilmModulesDetlev Koch, Head of BU Solar Thin Films & Senior Vice President,O C Oerlikon Balzers AG Break – 12.30 to 14.00 hrs.Afternoon SessionMEMS/MOEMS14.00 to 14.30 hrs.Market Trends and Technical Advances in M(O)EMSDr. Eric Mounier, Manager for MEMS & Optoelectronics andMicronews Chief Editor, Yole Développement14.30 to 15.00 hrs.Inorganic/Organic Hybrid Polymers (ORMOCER) forOptical InterconnectsDr. Michael Popall, Head of Microsystems and Portable PowerSupply, Fraunhofer ISC15.00 to 15.30 hrs.Future MOEMS and Photonic MicrosystemsDr. Thomas Hessler, Director Axetris, Leister Process Technologies15.30 to 16.15 hrs.Innovations in MOEMS product developmentProf. Hubert Karl, Director, Fraunhofer IPMSWednesday 9 AprilMorning Session Multimedia, Displays and Lighting 10.15 to 10.45 hrs.Plasmonics for Photonics: Challenges and Opportunities Ross Stanley, Section Head: MOEMS & Nanophotonics, CSEM 10.45 to 11.15 hrs.Photonic Microsystems for Displays Edward Buckley, VP Business Development, Light Blue Optics Ltd.11.15 to 11.45 hrs.Matrix-Beam – the antiglaring LED-high beam Benjamin Hummel, Research for Concept Lighting T echnologies, Audi 11.45 to 12.30 hrs.High Brightness OLEDs for Next Generation LightingPeter Visser, Project Manager, OLLA Project, The Netherlands Break –12.30 to 14.00 hrs.Photonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747 7Thursday 10 AprilMorning SessionImaging10.15 to 10.45 hrs.High Resolution Imaging detectors for invisiblelight –Development and IndustrialisationHans Hentzell, CEO, Acreo10.45 to 11.15 hrs.(Presentation to be confi rmed.)11.15 to 11.45 hrs.Raman Spectroscopy, Raman Imaging and FutureTrendsSopie Morel, Sales Manager, Molecular & Microanalysis Division,HORIBA Jobin Yvon 11.45 to 12.30 hrs.World Markets for Lasers and Their Application Steve Anderson, Associate Publisher/Editor-in-Chief,Laser Focus World Break – 12.30 to 14.00 hrs. Afternoon SessionBiomedical and Healthcare Photonics 14.00 to 14.30 hrs.Photonic Systems for Biotechnology Research Karin Schuetze, Director of R&D, Carl Zeiss Microimaging 14.30 to 15.00 hrs.Photonics 4 Life Prof. Jeürgen Popp, Director, IPHT Germany 15.00 to 15.30 ser System Development for Biophotonics Chris Dorman, Managing Director, Coherent Scotland15.30 to 16.15 hrs.Supercontinuum Light - a paradigm shift in lasersources for biophotonicsJakob Dahlgren Skov, CEO, Koheras Husain Imam, Business Development Manager, Koheras Industrial Perspectives ProgrammeWednesday 9 April Afternoon Session OPERA 2015: European Photonics - Corporate and Research Landscape 13.30 to 13.45 hrs.Optics and Photonics in the 7th Framework ProgrammeGustav Kalbe, Head of Sector - Photonics, Information Society andMedia, Directorate General, European Commission 13.45 to 14.00 hrs.OPERA 2015: Aims, Results and link to Photonics 21Markus Wilkens, VDI 14.00 to 14.20 hrs.European Photonics Industry Landscape Bart Snijders, TNO 14.20 to 14.40 hrs.European Photonics Research Landscape Marie-Joëlle Antoine, Optics Valley 14.40 to 15.00 hrs.Resources for Photonics Development Peter Van Daele, IMEC Break – 15.00 to 15.15 hrs. 15.15 to 15.35 hrs.Towards the Future on Optics and Photonics ResearchDr. Eugene Arthurs, SPIE Europe (UK)15.35 to 16.15 hrs.Strategic Opportunities for R&D in EuropeMike Wale, Bookham, UK16.15 to 16.45 hrs.A Sustainable Business Model for Optics andPhotonicsDavid Pointer, Managing Director, Point Source (Pending)16.45 to 17.15 hrs.Final Open DiscussionChaired by: Gustav Kalbe, Head of Sector - Photonics, InformationSociety and Media, Directorate General, European Commission8Photonics Europe 2008 · /pe · info@ · TEL: +44 29 2089 4747Photonics Innovation Village Tuesday to Thursday during Exhibition HoursThe Photonics Innovation Village will showcase the latest projects and breakthroughs from optics-photonics researchers at universities, research centres and start-up companies. This is a great opportunity to see how EU R&D and project funds are being used by some of the great young innovators in Europe.A window on creative products developed by universities and research centres. Under the patronage of the European Commission, fi fteen entrants from across Europe complete to win categories ranging from Best Marketability to Best Design, Best Technology, and Best Overall Product.Low power remote sensing system Y. A. Polkanov, Russia (Individual work)New approach is based on use of a low-power radiation source with specifi ed gating, when time of source radiation interruption is equal to a pulse duration of ordinary lidar. We propose to reconstruct the average values of these characteristics over the parts commensurable with the sounding path length. As scanning systems is offered with speed of circular scanning is determined by time of small linear moving of a laser beam. It allows to predict a reduction of the meteorological situation stability from an anticipatory change of the revealed structure character of optical heterogeneities of a atmosphere ground layer atmosphere.Point of care sensor for non-invasive multi-parameter diagnostics of blood biochemistry Belarusian State University, Belarus; Ruhr-Universität-Bochum, Germany; Second Clinical Hospital, Belarus Compact fi bre optical and thermal sensor for noninvasive measurement of blood biochemistry including glucose, hemoglobin and its derivatives concentrations is developed as a prototype of the point-of-care diagnosticdevices for cardiologic, tumour and diabetic patients. Integrated platform for data acquisition, data processing and communication to remote networks has been developed on the pocket PC.Polarization-holographic gratings and devices on their basisLaboratory of Holographic Recording & Processing of Information, Institute of Cybernetics, GeorgiaWe have developed the technology of obtaining of polarization-holographic gratings that have anisotropic profi le continuously changing within each spatial period and also the technology of obtaining of polarization-holographic elements on the basis of such gratings. Special highly effective polarization-sensitive materials developed by us are used for obtaining such gratings and elements. We can present samples of gratings and elements and give a demonstration of their work.Ultra-miniature omni-view camera moduleImage Sensing group of the Photonics Division of CSEM (Centre Suisse d’Electronique et de Microtechnique), SwitzerlandA live demonstration with a working prototype of a highly integrated ultra-miniature camera module with omni-directional view dedicated to autonomous micro fl ying devices is presented.Femtosecond-pulse fi bre laser for microsurgery and marking applicationsMultitel, BelgiumMultitel presents a new prototype of an all-fi bred femtosecond amplifi ed laser. The device has been specifi cally developed for micromachining and microsurgery applications and operates at 1.55µm, which corresponds to a high absorption peak of water (molecule contained in large quantity in living tissue and cells). Since no free-space optics is used for pulse compression or amplifi cation the prototype is compact and very stable. Moreover, the seed laser source has a high repetition rate therefore enabling multiphoton absorption applications and use in multi-pulse and burst modes.Flexible artifi cial optical robotic skinsDepartment of Applied Physics and Photonics (VUB-TONA) and Robotics & Multibody Mechanics Research Group (VUB-R&MM) of the Vrije Universiteit Brussel, Belgium; Thin Film Components Group (UG-TFCG) and Polymer Chemistry & Biomaterials Research Group (UG-PBM) of the Universiteit Gent, BelgiumWe will present a paradigm shifting application for optical fi bre sensors in the domain of robotics. We propose fi bre B ragg gratings (FB Gs) written in highly-birefringent microstructured optical fi bres integrated in a fl exible skin-like foil to provide a touch capability to a social pet-type robot for hospitalized children named “Probo”. The touch information is complementary to vision analysis and audio analysis and will be used to detect where Probo is being touched and to differentiate between different types of affective touches such as tickling, poking, slapping, petting, etc.Co-Sponsored by: Location: Galleri de Marbre Under the patronage of the European Commission, Photonics Unit Join us for the Photonics Innovation Village Awards 2008 which will take place on Wednesday, 9th April 2008, from 17.00 hrs. in the Galerie de Marbre.3D tomographic microscopeLauer Technologies, FranceThe 3D tomographic microscope generates 3D high-resolution images of non-marked samples. The demonstration will show 3D manipulation of images obtained with this microscope.Polar nephelometerInstitute of Atmospheric Optics of Tomsk, RussiaMaterial comprising a matrix, apatite and at least one europium composite compound with particle medium sizes more 4-5 micron. The composition for the production of the material comprises (wt. %) apatite 0.01-10.0; composite compound. 0.01-10.0, and the balance is a matrix-forming agent, such as a polymer, a fibre, a glass-forming composition, or lacquer/adhesive-forming substance.High speed Stokes portable polarimeterMIPS Laboratory of the Haute Alsace University, FranceThe implementation of an imaging polarimeter able to capture dynamic scenes is presented. Our prototype is designed to work at visible wavelengths and to operate at high-speed (a 360 Hz framerate was obtained), contrary to commercial or laboratory liquid crystal polarimeters previously reported. It has been used in the laboratory as well as in a natural environment with natural light. The device consists of commercial components whose cost is moderate. The polarizing element is based on a ferroelectric liquid crystal modulator which acts as a half-wave plate at its design wavelength.Diffractive/refractive endoscopic UV-imaging system Institut für Technische Optik (ITO) of the University of Stuttgart, GermanyWe present a new optical system with an outstanding high performance despite of demanding boundary conditions of endoscopic imaging to enable minimal invasive laser-based measurement techniques. For this purpose the system provides a high lens speed of about 10 times the value of a conventional UV-endoscope, a multiple broad band chromatic correction and small-diameter but wide-angle access optics. This was realized with a new design concept including unconventional, i.e. diffractive components. An application are UV-LIF-measurements on close-to-production engines to speed up the optimization of the combustion and produce aggregates with less fuel consumption and exhaust gases like CO2.Light-converting materials and composition: polyethylene fi lm for greenhouses, masterbatch, textile, sunscreen and aerosolUsefulsun Oy, Finland; Institute Theoretical and Experimental Biophysics Russian Academy of Sciences, RussiaThe composition for the production of the material comprises (wt. % ) composite compound (inorganic photoluminophore particles with sizes 10-800nm) -0.01-10.0; coordination compound of metal E (the product of transformation of europium, samarium, terbium or gadolinium ) - 0,0-10,0 and the balance is a matrix-forming agent, such as, a polymer, a fi ber, a glass-forming composition or gel, aerosol, lacquer/adhesive-forming substance. The present invention relates to composite materials, in particular to light-converting materials used in agriculture, medicine, biotechnology and light industry.HIPOLAS - a compact and robust laser sourceCTR AG (Carinthian Tech Research AG), AustriaThe prototype covers a robust, compact and powerful laser ignition source for reciprocating gas and petrol engines that could be mounted directly on the cylinder.We have developed a diode pumped solid-state laser with a monolithic Neodymium YAG resonator core. A ring of 12 high power laser diodes pumps the resonator. Due to the adjustment-free design, the laser is intrinsically robust to environmental vibrations and temperature conditions. With overall dimensions of Æ 50 x 70 mm the laser head is small enough to be fi tted at the standard spark plug location on the cylinder head. The dimensions can be reduced for future prototypes. OLLA OLED lighting tile demonstratorOLLA project-consortiumOLED technology is not only a display technology but also suited for lighting purposes. The OLLA project has the goal to demonstrate viability of OLED technology for general lighting applications. The demonstrator tile shown here combines the current results of the project : a large sized (15x15cm2) white OLED stack with high effi cacy (up to 50 lm/W), combined with long lifetime (>10.000 hours).During Photonics Europe, we will show several OLEDs tiles in different colors. The demonstrators are made by the OLLA project-consortium members. The large OLED demonstrator tile was fabricated on the inline tool at Fraunhofer IPMS in Dresden.Analyze-IQNanoscale Biophotonics Laboratory, School of Chemistry,and Machine Learning / Data Mining Group, Department ofInformation Technology, National University of Ireland, Galway, IrelandAnalyze-IQ is the next generation spectral analysis software tool for optical and molecular spectroscopies such as Raman, Mid-IR, NIR, and Fluorescence. The Analyze-IQ software is based on patented machine-learning algorithms and a model based approach in which the software learns to recognise the relevant information in complex mixtures from sample spectra. It then uses these models to rapidly and accurately identify or quantify unknown materials such as narcotics and explosives, in complex mixtures commonly found in law-enforcement and industrial applications.Micro-optical detection unit for lab-on-a-chipDepartment of Applied Physics and Photonics (VUB-TONA) of the Vrije Universiteit Brussel, BelgiumWe present a detection unit for fl uorescence and UV-VIS absorbance analysis in capillaries, which can be used for chromatography. By usinga micro-fabrication technology (Deep Proton Writing) the optics aredirectly aligned onto the micro-fl uidic channel. This integration enables the development of portable and ultimately disposable lab-on-a-chip systems for point-of-care diagnosis. We will explain the working principle of our detection system in a proof-of-concept demonstration set-up while focusing on some specifi c applications of micro-fl uidics in low-cost lab-on-a-chip systems.Photonics Innovation Village。

Isobar Surge SuppressorPremium surge, spike and line noise protectionModel #: EURO-44 outlets/2 m cord330 joule ratingAll metal housing with LEDsIsolated filter banksDESCRIPTIONFor more than 20 years, America's leading companies have trusted Tripp Lite's Isobar Premium surge and noise suppressors to protect sensitive computer, networking and telecom equipment. With more than 14 million satisfied customers, the Isobar remains the world's #1 selling premium surge suppressor. Loaded with a generous combination of high quality components, near indestructible all-metal case and unique noise filtration system, the isobar offers the highest level of protection attainable in a multi-outlet strip. Robust surge suppression circuits with sine-wave tracking offer extreme levels of protection against the heaviest surge conditions exceeding IEEE 587 category A & B specifications. Isobar’s unique protection system combines large torroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference, even noise generated by other pieces of connected equipment. EURO-4 offers 4 outlets arranged in two filter banks to prevent system crashes, reboots and performance problems common as noisy system peripherals are powered off and on. Surge suppression rated at 330 joules offers network-grade protection. Widely spaced IEC320-C13 outlets accommodate up to 2 large transformer plugs without blocking outlets. Detachable IEC-320 C14 inlet connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles. Two-meter C13 to C14 interconnection cable and keyhole mounting tabs included. Lifetime warranty.PLUG / OUTLETS: Input: IEC320 C14 inlet / Output: 4 IEC320 C13 outlets / 2m C13 to C14 interconnection cable includedELECTRICAL: 200-240V AC, 50/60Hz (Use at 120V supported)SUPPRESSION: AC: 300V RMS Clamping / 330 joulesFORMAT: Corded all-metal strip with transformer spaced outletsKEY BUYING POINTSTripp Lite's ISOBAR is the world's #1 selling premium suppressor series with more than 14 million satisfied customers and a safety-tested history of 20+ yearsRobust surge suppression with sine-wave tracking protects against the heaviest of surge conditions, exceeding IEEE category A&B specificationsMulti-component suppression circuits combine torroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference, even noise from other pieces of connected equipment.4 outlets arranged in two filter banks prevent system crashes, reboots and performance problems common as noisy peripherals arepowered off and on.Network grade surge suppression rated at 330 joulesWidely spaced outlets accommodate up to 2 large transformer plugs without blocking outletsLighted power switch confirms power on/off status2m C13 to C14 interconnection cable includedKeyhole mounting tabs allow permanent installation200-240VAC, 50/60Hz electrical compatibilityLifetime product warrantyTYPICAL APPLICATIONSIdeal for premium protection of personal computers with peripherals, network and CAD/CAM/CAE workstations, internetworking accessories, telecommunications systems, point of sale equipment, audio/video and home theater systems in any home, office or industrial application.PACKAGE INCLUDESEURO-4 premium surge suppressorInstruction manual with warranty informationCOMPLETE SPECIFICATIONSSystem overview:ISOBAR premium surge and noise suppression system for 220-240V prevents equipmentdamage and performance problems resulting from damaging transient surges and line noise.Active filter network maintains noise-free output with zero reaction / response time. Ruggedall-metal, mountable housing fitted with 4 IEC-320 C13 outlets. 330 joules AC protectionlevel.Voltage compatibility:220/240 VACFrequency compatibility:50/60 HzOutput volt amp capacity (amps):9Outlet quantity / type: 4 IEC-320 C13 output receptaclesInput connection type:IEC-320 C14 inlet connection accepts a variety of detachable cordsets to match country orsite-specific wall receptaclesInput cord length (ft.): 6.6Input cord length (m): 2.0Input plug features:Includes 1 detachable IEC-320 C13 to C14 cableRecommended electrical service:220/240 10ASwitches:Two position red illuminated on/off power switchProtection modes:Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppressionAC suppression joule rating:330 joulesClamping voltage (RMS):300VAC suppression response time:NM = 0 ns. CM = <1 nsAC suppression components used:Metal oxide varistors, toroidal balanced chokes, ferrite rod-core inductors and VHFcapacitors.Isolated filter banks:Unique isolated filter bank design offers additional filtering between each duplex pair ofoutlets on the strip to prevent electrical noise interference between connected loads. Includes2 filter banks.Immunity:Conforms to IEE 587 / ANSI C62.41Unit Dimensions (HWD/in): 3.5 x 7 x 2.5Unit Dimensions (HWD/cm):8.9 x 17.8 x 6.4Material of construction:Extruded aluminumIntegrated keyhole mounting tabs:Metal end caps are fitted with keyhole mounting tabs for wallmount installationHousing color:GrayReceptacle color:BlackAC line cord color:GrayApprovals:TUV (German)Product warranty:LifetimeAppearance:Rugged all-metal strip format with high quality duplex receptacles and detachable line cordThe policy of Tripp Lite is one of continuous improvement.Specifications are subject to change without notice. Therefore, your product may vary slightly from what is currently listed.Tripp Lite World Headquarters1111 W. 35th StreetChicago, IL 60609 USACustomer Support(773) 869-1234© 2004 Tripp Lite. All Rights Reserved.。