7B33-01-2中文资料

编号日文名中文名GS码001 フシギダネ妙蛙种子082F043503A4E7ED 002 フシギソウ妙蛙草483E2A861BCE6E30 003 フシギバナ妙蛙花D2AEB9BC6D67A9B8 004 ヒトカゲ小火龙45764D46FFD611A9 005 リザード火恐龙270E4C82D4A0EA8A 006 リザードン喷火龙F451FABE23684D86 007 ゼニガメ杰尼龟BC5F4BC19E504314 008 カメール卡咪龟0643C214E99FD01B 009 カメックス水箭龟B3127F0459359295 010 キャタピー绿毛虫D86CD11895139F73 011 トランセル铁甲蛹F54A12F77B2099F5 012 バタフリー巴大蝴2AAC7F1DF6000594 013 ビードル独角虫1B88DA73E9F717CE 014 コクーン铁壳昆ECD014342D064460 015 スピアー大针蜂98498DB9B8EF3A96016 ポッポ波波6E93A2B7D174B891 017 ピジョン比比鸟71A4E4E126E92B3F 018 ピジョット比雕823812920DFDD282 019 コラッタ小拉达95F2785C6FC1B39B020 ラッタ拉达3D51D8904ED40E65 021 オニスズメ烈雀36CC9670F7B72D4F 022 オニドリル大嘴雀7ABA8A240B43D8B0023 アーボ阿柏蛇4E8EC670690E8BA5 024 アーボック阿柏怪F51E51FA6577292C 025 ピカチュウ皮卡丘ED186531EE2DC737 026 ライチュウ雷丘70AEB016B7A46A34027 サンド穿山鼠4F27932231109752 028 サンドパン穿山王92676644500CFFBD 029 ニドラン♀ 尼多兰803D970B3C4D48FF 030 ニドリーナ尼多娜B3B4E37E5A0953B4 031 ニドクイン尼多后CAE6B5418DBF002B 032 ニドラン♂ 尼多朗7CED4776C9BC5FFF 033 ニドリーノ尼多利诺637E912A7D26948D 034 ニドキング尼多王C91A7E975E30F8F1 035 ピッピ皮皮0C29B3E6E87A80D7 036 ピクシー皮可西D6069AA6B178F47E037 ロコン六尾DF5136F259619CCA 038 キュウコン九尾DB9E0DD4DC880795 039 プリン胖丁54AAF8399CFE3578 040 プクリン胖可丁D2EDF2A4682C6E04 041 ズバット超音蝠BD503F7F0F3B6CCC 042 ゴルバット大嘴蝠3D6CA3B47B8DC92B 043 ナゾノクサ走路草4E2667A2888B1ADE 044 クサイハナ臭臭花EB3DEB5E8F3F0762 045 ラフレシア霸王花78D94F49A59AD633046 パラス派拉斯9FC73DD37A6857E3 047 パラセクト派拉斯特CB5FEB78A1832458 048 コンパン毛球0C53A30CB3B74FA1 049 モルフォン末入蛾D0AC0DDF28E2C76A 050 ディグダ地鼠3A9AA0A39F036981 051 ダグトリオ三地鼠E3E97E4907793FD1 052 ニャース喵喵0128F01179EA209C 053 ペルシアン猫老大DF7EC698E086864B 054 コダック可达鸭2BC83B45A68BFDE5 055 ゴルダック哥达鸭66641EA91F326429056 マンキー猴怪087074EC24E5C796 057 オコリザル火爆猴53E68CBEA3AED5B7 058 ガーディ卡蒂狗DA853A26ED454B3E 059 ウインディ风速狗5250ED1E7BFACDDE 060 ニョロモ蚊香蝌蚪A94A3E55C8A239EA 061 ニョロゾ蚊香蛙6FD99E1996B6B086 062 ニョロボン快泳蛙67E8B7645554B888 063 ケーシィ凯西E7450B71C498B8B9 064 ユンゲラー勇吉拉1F33E3D39805522B 065 フーディン胡地3D6614CAEB74A686 066 ワンリキー腕力0FFD43DF66E662C0 067 ゴーリキー豪力47D305AF7342D668 068 カイリキー怪力F62201DA0E9508BB069 マダツボミ喇叭芽186FA2C634DD0F8D070 ウツドン口呆花2DF82722F7DA5123071 ウツボット大食花96DE266F2184512A 072 メノクラゲ玛瑙水母22F15FD590E8F0BD 073 ドククラゲ毒刺水母04D90CDFC05A5514 074 イシツブテ小拳石0AA34327D6893732075 ゴローン隆隆石610329D74685888F076 ゴローニャ隆隆岩9BBA394BF03F9C85077 ポニータ小火马5F5000BA70E22EDA078 ギャロップ烈焰马C1F6A71D4D836334079 ヤドン呆呆兽81051F88DDEA905D080 ヤドラン呆河马EDF4DEB6A1CD3B43081 コイル小磁怪72C47D7FDA7497A8082 レアコイル三合一磁怪DEFBD36BEB91B231 083 カモネギ大葱鸭5274B2331C3AB5A9084 ドードー嘟嘟82E21AC20E5C5323085 ドードリオ嘟嘟利5A12018B1DBAE403086 パウワウ小海狮ECC827399FF61ED1087 ジュゴン白海狮8130BAEBD40F9B20088 ベトベター臭泥33FC175C38273B1D089 ベトベトン臭臭泥C8A3092E85ABF252 090 シェルダー大舌贝A0921CEE9B1435DF 091 パルシェン铁甲贝6E9B9A58CEA840E4092 ゴース鬼斯6F41ABE1874E212E 093 ゴースト鬼斯通CCC4429BA1AFE787094 ゲンガー耿鬼5A2C3F170F3C8E8D095 イワーク大岩蛇2CF19EE240C3A811096 スリープ素利普48F8962E040E4DD0 097 スリーパー素利柏5F68CE65571B24D7098 クラブ大钳蟹34A91C9B09D163F1 099 キングラー巨钳蟹C2FCE4DC1063A38F 100 ビリリダマ雷电球D7EDD4010B653DD6 101 マルマイン顽皮弹760D57F52D2FDECE 102 タマタマ蛋蛋534DC146108B2E58103 ナッシー椰蛋树4FD6DD8E43C42AE5 104 カラカラ可拉可拉FBE4E786112D8B22 105 ガラガラ嘎拉嘎拉4B3B9D02EE88FDF6 106 サワムラー沙瓦郎E942CCC5C5CC1B5A 107 エビワラー艾比郎8C72BA83E6ED40A1 108 ベロリンガ大舌头2BDEFE899CE3324F 109 ドガース瓦斯弹C0F811884C467FAB 110 マタドガス双弹瓦斯6DCBE85BA9FDBDB3 111 サイホーン铁甲犀牛FCEF8534EE8C31A3 112 サイドン铁甲暴龙1692A749C598C0C1 113 ラッキー吉利蛋79C0D7110F3CB283 114 モンジャラ蔓藤怪FDC8FD03BB1849E5115 ガルーラ袋龙72A6E419ACB9733F116 タッツー墨海马D34D0F32017EAC15117 シードラ海刺龙692936C6E0F03247 118 トサキント角金鱼E8BED70F5123881D 119 アズマオウ金鱼王A3C37E32F8421AAC 120 ヒトデマン海星星696000963AD8D3F6 121 スターミー宝石海星5BC4EEB96E96EFA5 122 バリヤード吸盘魔偶627452613EC2FFDE 123 ストライク飞天螳螂1EE17933164C6E7F 124 ルージュラ迷唇姐F3A9EC3C992834F6 125 エレブー电击兽F01E742CCE099315 126 ブーバー鸭嘴火龙C241F30DD8A85532 127 カイロス大甲3E597B183B3306E4 128 ケンタロス肯泰罗2E5B8430F18EE879 129 コイキング鲤鱼王99E0AA74F854F3D0 130 ギャラドス暴鲤龙DC48D07310002AE8 131 ラプラス乘龙1DE60C08620820A1132 メタモン百变怪F5F276806A896E85133 イーブイ伊布7E412C931CA2F132 134 シャワーズ水精灵C768CF5C2E57CFC4 135 サンダース雷精灵DD9AABAF6073EB75 136 ブースター火精灵39F6D058BDAC1E0F 137 ポリゴン3D龙5B0E30B7D44E55B6138 オムナイト 菊石兽 323788633ADA92C0 139 オムスター 多刺菊石兽 1EEFF7814DFC1293140 カブト 化石盔 CA61B3F1211C2582141 カブトプス 镰刀盔 51AAD0E24D35452F 142 プテラ 化石翼龙 706703EF10641042143 カビゴン 卡比兽 8A5767AF63429CB7144 フリーザー 急冻鸟 A41D0ACEFF8012A1 145 サンダー 闪电鸟 DDF12C1C65CEDB4C 146 ファイアー 火焰鸟 30E6775F95A264DE 147 ミニリュウ 迷你龙 3F9501D587B284BD 148 ハクリュー 哈克龙 4021C6C9E11E7AA9 149 カイリュー 快龙 B7B5DC94CD642A93150 ミュウツー 超梦 04213FE23BFBBB48151 ミュウ 梦幻 85D457A423876A92回复 引用举报离线高攻只看该作者 9楼 发表于: 2006-01-24152 チコリータ 菊草叶 055DF79CAEDC63E6 153 ベイリーフ 月桂叶 2858DEA02E895B发帖574帅气金钱2510在线时间0 小时注册时间2006-01-15 ∙加关注∙发消息28154 メガニウム大菊花A63AA02F660986F0155 ヒノアラシ火球鼠3B81E34E19F077AA156 マグマラシ火岩鼠7AC7F62E1680E1BE157 バクフーン火爆兽AA81FF5A264F354F158 ワニノコ小锯鳄3A24D35C5C34EFC3159 アリゲイツ蓝鳄A6E78325C594109D160 オーダイル大力鳄C03ED3C894BD6C1D161 オタチ尾立926D27E1675BF1C6 162 オオタチ大尾立9857BFC6C28A3DA7163 ホーホー咕咕7DB7CB2C21FC8D8B 164 ヨルノズク猫头夜鹰D615D168D59BA45B165 レディバ巴瓢虫FC1A579B9C7F875A166 レディアン安瓢虫BD9D2F2E3364AE3C167 イトマル线球68093FF912BF7D77 168 アリアドス阿利多斯F1AB3F439528E52B169 クロバット叉字蝠56599D12BDF50F2E170 チョンチー灯笼鱼3E8A50744277E337171 ランターン电灯怪001FDFFF21882F68172 ピチュー皮丘714D6B298BC6EC22 173 ピィ皮宝宝1F35494A1DCE6EDE 174 ププリン宝宝丁68CE86AFDDB75669175 トゲピー波克比9BE04CB6EB4A9965176 トゲチック波克基古AE05D51F3C251E59177 ネイティ天然雀0AE12087E4497B1E178 ネイティオ天然鸟A96C3FDD7387A1A8179 メリープ咩利羊BEACBE962568D1CE180 モココ绵绵05EB2EEA908D3FE5 181 デンリュウ电龙8142ACCA3E9521C9182 キレイハナ美丽花833055E891AFFAC1183 マリル玛力露A85CECECE6A8B050 184 マリルリ玛力露力0C6B34898965528E185 ウソッキー胡说树7F874B2BB9A4E769186 ニョロトノ牛蛙君3A1C188D9D317AD9187 ハネッコ毽子草D92133ABC22965D9188 ポポッコ毽子花E6E5C2C4B87E2217189 ワタッコ毽子棉3E3A1A4844B18551190 エイパム长尾怪手78E03E5BC1A6873C191 ヒマナッツ向日种子260461FCCEF855D9192 キマワリ向日花怪DE2CCF951521BDF2193 ヤンヤンマ阳阳玛B5A29AA795844206194 ウパー乌波75CE0975A57E63BC 195 ヌオー沼王DAF45ACC2DE4BE53 196 エーフィ太阳精灵26891F77B0BF1A6A197 ブラッキー月精灵5CB6CB2D968C4B64198 ヤミカラス黑暗鸦2EBA5B47D7F7C439199 ヤドキング呆兽王F7D72DA3BAFB25EE200 ムウマ梦妖5254BFFD294B828D201 アンノーンＡ未知图腾Ａ723BEADF1411A322BC391B39201 アンノーンＣ未知图腾Ｃ94FEA989F6B4B04E201 アンノーンＤ未知图腾ＤBDC945D77111BF0E201 アンノーンＥ未知图腾ＥA572825E80AD79F2201 アンノーンＦ未知图腾ＦC2F5FA16733C7807201 アンノーンＧ未知图腾Ｇ8BE9D4DCA2F95FD6201 アンノーンＨ未知图腾Ｈ30EA5B87DCF75901201 アンノーンＩ未知图腾Ｉ7577BD419F62A2EC201 アンノーンＪ未知图腾Ｊ3ED7A829A50633AA201 アンノーンＫ未知图腾Ｋ8803EF14961360E2201 アンノーンＬ未知图腾ＬD2BAC2BBB2AE1D0432B73A8201 アンノーンＮ未知图腾Ｎ3E420717EB0CBD15201 アンノーンＯ未知图腾Ｏ748C5CCD51225A39201 アンノーンＰ未知图腾Ｐ6220ABFC4FC2AD90201 アンノーンＱ未知图腾ＱAA8E07719AB45062201 アンノーンＲ未知图腾ＲB25A472574A144B3201 アンノーンＳ未知图腾ＳDA6BC901AF744483201 アンノーンＴ未知图腾Ｔ10729C6128F2E8C8201 アンノーンＵ未知图腾ＵAEC7AE5120EF592D201 アンノーンＶ未知图腾Ｖ3FD87557225E8CC8201 アンノーンＷ未知图腾Ｗ360E89CB3B5401A380873789201 アンノーンＹ未知图腾Ｙ148BF7B756890CF0201 アンノーンＺ未知图腾Ｚ8A9740A4966404F2202 ソーナンス果然翁FE7B04A31BC9CC0B203 キリンリキ麒麟奇580DB3ED8B3C2A2A204 クヌギダマ榛果球E5776A5DF552CB4D205 フォレトス佛烈托斯4A868ED3C0FCC74F206 ノコッチ土龙弟弟848FCE9AAA4AAE76207 グライガー天蝎9479CA9A0D23258E208 ハガネール大钢蛇508FA304F5375F02209 ブルー布卢EBB0073358998224 210 グランブル布卢皇E1EA29F49FD12A211 ハリーセン千针鱼EEF3D5C732A65F7F212 ハッサム巨钳螳螂8DCE3BFDC7A14ADD213 ツボツボ壶壶D61497A93D03FA5F 214 ヘラクロス赫拉克罗斯7EF393ADD62F87DC215 ニューラ狃拉4DAF280FBF15051C 216 ヒメグマ熊宝宝A1A4CE4013657A70217 リングマ圈圈熊D8DA7BAA4F588281218 マグマッグ熔岩虫05C3397946EB303E219 マグカルゴ熔岩蜗牛2AB43205FABC6FF5220 ウリムー小山猪CB0B64348D12FC36221 イノムー长毛猪54F6DC63EA15CACD222 サニーゴ太阳珊瑚11E07E0899B3CB223 テッポウオ铁炮鱼E8BA3E38409543FB224 オクタン章鱼桶C1DEAC4C64D851A5225 デリバード信使鸟B90C6ECB6BC2229B226 マンタイン巨翅飞鱼B3FFB0A666823D98227 エアームド盔甲鸟668AD40AE7BA8E4E228 デルビル戴鲁比53545F05FCDBBE8F229 ヘルガー黑鲁加0BCB0303DFF91E2D230 キングドラ刺龙王28E8D73C14B7B12F231 ゴマゾウ小小象FB7D5413967AA153 232 ドンファン顿甲6834E032DC77BB07 233 ポリゴン3D龙2 7A4E73E665C95482234 オドシシ惊角鹿68E60EAA3A91D7D3235 ドーブル图图犬1AFD8F3F08D85085236 バルキー巴尔郎61292A76CFD22B51237 カポエラー柯波朗40D79A22365A2A6D238 ムチュール迷唇娃BDEB47F4CB5EB6B8239 エレキッド电击怪399BABA7E2C0B2CD240 ブビィ小鸭嘴龙5E2FE0CC1A3120F4241 ミルタンク大奶罐9623903001C7BF60242 ハピナス幸福蛋CF930C385D5C75B6243 ライコウ雷公5782AA1383518AAC 244 エンテイ炎帝11BF55279E0ED4DA 245 スイクン水君BA3A82D5992149F4246 ヨーギラス由基拉E8747E3B65B231BA247 サナギラス沙基拉223B12243790D12E248 バンギラス班吉拉E6601D6D74A2F234249 ルギア洛奇亚B2417B603CEE43EC250 ホウオウ凤王17FF9CD47344A847251 セレビィ雪拉比A8FBA16EE5D92BC9回复引用举报离线高攻发帖574帅气只看该作者10楼发表于: 2006-01-24252 キモリ木守宫26FD6C0632F789E2253 ジュプトル森林蜥蜴7A30CB39018FD4EA254 ジュカイン蜥蜴王A086978C56076E69255 アチャモ火稚鸡AA0D5A4DD866D8DC金钱2510在线时间0 小时注册时间2006-01-15 ∙加关注∙发消息256 ワカシャモ力壮鸡574C1447BAD9D091257 バシャーモ火焰鸡08D073D31845BB05258 ミズゴロウ水跃鱼9DA259E119D91BCB259 ヌマクロー沼跃鱼8F063467E95EB6C5260 ラグラージ巨沼怪771DF2A2EF16293E261 ポチエナ土狼犬46D472F2FD7AF29C262 グラエナ大狼犬F0A7B4DF4BD58023263 ジグザグマ蛇纹熊2FC992E3212F1A17264 マッスグマ直冲熊3D705B62D7BC2FE0265 ケムッソ刺尾虫E796A028160AC07A266 カラサリス甲壳蛹C5F8FB45912FB5E9267 アゲハント狩猎凤蝶7E36341168F145D2268 マユルド盾甲茧C20A3807EF87AEA9269 ドクケイル毒粉蝶9E51BC0905A70261270 ハスボー莲叶童子B9C1BBB6FC720D8E271 ハスブレロ莲帽小童72B08A86061F7247272 ルンパッパ乐天河童E3A8FF7A55F168F6273 タネボー橡实果80DC79ABA6FC982C274 コノハナ长鼻叶B9ECD4DE32274ED3275 ダーテング狡猾天狗B92267207C9DB79F276 スバメ傲骨燕2B138A8666A36DEB 277 オオスバメ大王燕EEC121B6D9E1CC86278 キャモメ长翅鸥4FFE8E5A4450DAD279 ペリッパー大嘴鸥52B599F1D1730F71280 ラルトス拉鲁拉丝C23FD73A6C977E2E281 キルリア奇鲁莉安C503D6CF1414E015282 サーナイト沙奈朵DFA08776ABC77D44283 アメタマ雨蜘蛛C5838824C3885063284 アメモース雨翅蛾D8F1E0CDE359D5C5285 キノココ磨磨菇60996B96A203569C286 キノガッサ斗笠菇9040A99679E6CEB6287 ナマケロ懒人翁AD4DA1C69451E147288 ヤルキモノ过动猿3E4A6A0FCCDCF540289 ケッキング请假王CB75FF1D988594290 ツチニン土居忍士B4D9965E26D5FD3A291 テッカニン铁面忍者5C24C4544A14508A292 ヌケニン脱壳忍者E43838C9FC287259293 ゴニョニョ咕妞妞CC5895290250BC7E294 ドゴーム吼爆弹33AF2A790B7A8BDD295 バクオング爆音怪283029C7C68F3D07296 マクノシタ幕下力士24A5637EAB3BF86D297 ハリテヤマ超力王31B7B6EE0290C737298 ルリリ露利丽D9803312F502DF8D 299 ノズパス朝北鼻42E789203A4CC1B8300 エネコ向尾猫693A69EAC572F8EA301 エネコロロ优雅猫270D2F7D2524368E302 ヤミラミ勾魂眼17BEE25B0BAF9EB3303 クチート大嘴娃375CBB328FDB2217304 ココドラ可可多拉3BF239B00019AAD9305 コドラ可多拉59A68CFB65F0BE22 306 ボスゴドラ波士可多拉685A3CADB553EF33307 アサナン玛沙那1626A176D978292A308 チャーレム恰雷姆704F7DE89DFDAF18309 ラクライ落雷兽C4F99429CDBCA392310 ライボルト雷电兽2B6DED426397C1D2311 プラスル正电拍拍628EAB797167F1FA312 マイナン负电拍拍C5866EFD33783CBE313 バルビート电萤虫6D2D1306397C5C2E314 イルミーゼ甜甜萤008434132111FC29315 ロゼリア毒蔷薇D6247FACFB65D6EA316 ゴクリン溶食兽4EBCAA0A1739F6CE317 マルノーム吞食兽0E08514FB8739319318 キバニア利牙鱼18B8746A036C1E6D319 サメハダー巨牙鲨4022750CE8F057F8320 ホエルコ吼吼鲸84D9EBBCB663719B321 ホエルオー吼鲸王050A99F54D51AA4B322 ドンメル呆火驼CEDF2BF4CA1DB13C323 バクーダ喷火驼BAD607A4F5891F69324 コータス煤炭龟FD359CFA2A24CE91325 バネブー跳跳猪C959D2A1629D413B326 ブーピッグ噗噗猪79C9C5F2FDA6A748327 パッチール晃晃斑5B7DA1A1D117AE31328 ナックラー大颚蚁E6C80ACC795BCAEF329 ビブラーバ超音波幼虫DE135D22C45E8387330 フライゴン沙漠蜻蜓DF2A0FD888BC2E75331 サボネア沙漠奈亚18251670BA16FB6D332 ノクタス梦歌奈亚0E2CCE670DA344A5333 チルット青绵鸟5472CAC94650012E 334 チルタリス七夕青鸟5DAB14D1B537335 ザングース猫鼬斩C4DA6D6231AD75FC336 ハブネーク饭匙蛇96627B82DF65071D337 ルナトーン月亮岩0EDB8C7D021998D5338 ソルロック太阳岩DB6AA0B3D431B769339 ドジョッチ泥泥鳅A03665B7013FBFE8340 ナマズン鲶鱼王45C4744BE9031995341 ヘイガニ龙虾小兵9CAFBE2B769A21D1342 シザリガー铁蛰龙虾60A42196D054DFF5343 ヤジロン天秤偶405B381FDBD9C36F344 ネンドール念力土偶F64C71EAA2B7530D345 リリーラ触手百合BC7D76FB55C42346 ユレイドル摇篮百合887043A8B8EC4946347 アノプス太古羽虫92E64A19C1BD729E348 アーマルド太古盔甲718599796E681E92349 ヒンバス笨笨鱼44BC0D8B9AD3088A350 ミロカロス美纳斯44E29572FBE304B1351 ポワルンＮ天气小子－ＮF908E2B3C7F3701E351 ポワルン雪天气小子－雪AD18A7F5C2E2C4DA351 ポワルン晴天气小子－晴39DDA991C0DF7F2C351 ポワルン雨天气小子－雨106ADA657A3A588A352 カクレオン变隐龙79147956EB198A93353 カゲボウズ怨影娃娃B23B4138EE9A354 ジュペッタ诅咒娃娃6E2E71321DB15A51355 ヨマワル夜骷颅AF58E2CDB653E103356 サマヨール夜巨人8E1AF731F0EBC2EF357 トロピウス热带龙B2BA7076E0EECAAD358 チリーン风铃铃4DE969C7F9DC2D44359 アブソル阿勃梭鲁ED9357EC6FE8BFFE360 ソーナノ小果然翁76DA159FDC0A8624361 ユキワラシ雪童子E0A25F6EFA55310F362 オニゴーリ冰鬼护747C81BB12DACA11363 タマザラシ海豹球AB8FE43FDC5FEB2D364 トドグラー海魔狮199214359B61ADC0365 トドゼルガ帝牙海狮0BBAF430E8C01FD6366 パールル珍珠贝D625EFD8DF530001367 ハンテール猎斑鱼5EAE2E7AC4F14B22368 サクラビス樱花鱼FC7B272674C4DE3E369 ジーランス古空棘鱼CD40F306CF518736370 ラブカス爱心鱼B3007792C81144E6 371 タツベイ宝贝龙FA1C246CB983F569 372 コモルー甲壳龙8C163D6987E2D49E373 ボーマンダ暴蝾螈060E1B5A7CEE0C60374 ダンバル铁哑铃35FCC7F4ECFCFCF5375 メタング金属怪0ED95265094CC839376 メタグロス巨金怪B806EAEC97888965377 レジロック岩神柱E2DC36AE689E7303378 レジアイス冰神柱754FF88E0D2EF9CC379 レジスチル钢神柱BAC6AB87BC0FB157380 ラティアス拉帝亚斯6962C2C7745159D0381 ラティオス拉帝欧斯B3548E6E7AF634A8382 カイオーガ海皇牙7AA6D8B631408F4C383 グラードン古拉顿156740D3616812C8384 レックウザ裂空座12F6790F8F516F07385 ジラーチ吉拉祈E1EDAFC3FA066DCE386 デオキシスＮ迪欧西斯－ＮA7A2484E732D7FF7201 アンノーン！未知图腾！193150295AC4B710201 アンノーン？未知图腾？9790B4D865BFB479386 デオキシスＡ迪欧西斯－Ａ3F27B08DF76A8786386 デオキシスＤ迪欧西斯－Ｄ7444B05CFD75DF60386 デオキシスＳ迪欧西斯－ＳFCEC686558F4DDE9。

ASCII码一览表，ASCII码对照表ASCII（American Standard Code for Information Interchange，美国信息互换标准代码）是一套基于拉丁字母的字符编码，共收录了128 个字符，用一个字节就可以存储，它等同于国际标准 ISO/IEC 646。

ASCII 规范于1967 年第一次发布，最后一次更新是在1986 年，它包含了33 个控制字符（具有某些特殊功能但是无法显示的字符）和95 个可显示字符。

对控制字符的解释ASCII 编码中第0~31 个字符（开头的32 个字符）以及第127 个字符（最后一个字符）都是不可见的（无法显示），但是它们都具有一些特殊功能，所以称为控制字符（ Control Character）或者功能码（Function Code）。

这33 个控制字符大都与通信、数据存储以及老式设备有关，有些在现代电脑中的含义已经改变了。

有些控制符需要一定的计算机功底才能理解，初学者可以跳过，选择容易的理解即可。

下面列出了部分控制字符的具体功能：•NUL (0)NULL，空字符。

空字符起初本意可以看作为NOP（中文意为空操作，就是啥都不做的意思），此位置可以忽略一个字符。

之所以有这个空字符，主要是用于计算机早期的记录信息的纸带，此处留个NUL 字符，意思是先占这个位置，以待后用，比如你哪天想起来了，在这个位置在放一个别的啥字符之类的。

后来呢，NUL 被用于C语言中，表示字符串的结束，当一个字符串中间出现NUL 时，就意味着这个是一个字符串的结尾了。

这样就方便按照自己需求去定义字符串，多长都行，当然只要你内存放得下，然后最后加一个\0，即空字符，意思是当前字符串到此结束。

•SOH (1)Start Of Heading，标题开始。

如果信息沟通交流主要以命令和消息的形式的话，SOH 就可以用于标记每个消息的开始。

1963年，最开始ASCII 标准中，把此字符定义为Start of Message，后来又改为现在的Start Of Heading。

GENERAL DATALife ExpectancyMinimum operations Mechanical 5 x 105Electrical 1 x 105at 10 A 250 VAC Res.Operate Time (typical)10 ms at nominal coil voltage Release Time (typical)4 ms at nominal coil voltage (with no coil suppression)Dielectric Strength 5000 Vrms contact to coil(at sea level for 1 min.)3000 Vrms between open contacts3000 Vrms between contact sets Insulation1000 megohms min. at 20°C, 500 VDC,Resistance 50% RHDropoutGreater than 10% of nominal coil voltage Ambient Temperatureat nominal coil voltageOperating -40°C (-40°F) to 70°C (158°F)Storage -40°C (-40°F) to 105°C (221°F)Vibration0.062" (1.5 mm) DA at 10–55 Hz Shock 10 gEnclosure P.B.T. polyesterTerminalsTinned copper alloy, P.C.Max. Solder Temp.270°C (518°F)Max. Solder Time 5 seconds Max. Solvent Temp.80°C (176°F)Max. Immersion Time 30 seconds Weight18 gramsPacking unit in pcs50 per plastic tray / 500 per carton boxCONTACTSArrangement DPST (2 Form A)RatingsResistive load:Max. switched power:240 W or 2500 VA Max. switched current:10 AMax. switched voltage:150 VDC* or 400 VAC* Note: If switching voltage is greater than 30VDC,special precautions must be taken.Please contact the factory.Rated Load UL, CUR10 A at 250 VAC general use 100k cycles [1] [2] [3]TV-3 at 125 VAC [1]TÜV 10 A at 30 VDC resistive, 100k cycles [1] [2] [3]10 A at 250 VAC resistive, 100k cycles [1] [2] [3]Material Silver cadmium oxide [1], silver tin oxide [2]or silver nickel [3]Resistance< 50 milliohms initiallyZET TLERelectronics GmbHFax +49 89 800 97 200 office@ 0 97 800 89 +49 Tel. GermanyPuchheim, D-82178 Junkersstrasse 3, 2005-02-16DPST MINIATURE POWER RELAYFEATURES •Dielectric strength 5000 Vrms •1.5 mm contact gap•Epoxy sealed version available•10 Amp switching — double pole contacts •Isolation spacing greater than 8 mm •UL, CUR file E44211•TÜV file R9659062COILPowerAt Pickup Voltage 450 mW(typical)Max. Continuous 2.0 W at 20°C (68°F) ambient Dissipation Temperature Rise 40°C (83°F) at nominal coil voltage TemperatureMax. 130°C (266°F)NOTES1.All values at 20°C (68°F).2.Relay may pull in with less than “Must Operate” value.3.Specifications subject to change without notice.2005-02-16ZET TLERelectronics GmbHFax +49 89 800 97 200 office@ 0 97 800 89 +49 Tel.GermanyPuchheim, D-82178 Junkersstrasse 3,RELAY ORDERING DATACOIL SPECIFICATIONSORDER NUMBERNominal CoilMust OperateMax. ContinuousCoil ResistanceVDC VDC VDC OhmUnsealedSealed32.254.711.3 ±10%AZ733W–2A–3D AZ733W–2A–3DE 5 3.87.931 ±10%AZ733W–2A–5D AZ733W–2A–5DE 6 4.59.545 ±10%AZ733W–2A–6D AZ733W–2A–6DE 9 6.814.2101 ±10%AZ733W–2A–9D AZ733W–2A–9DE 129.018.9180 ±10%AZ733W–2A–12D AZ733W–2A–12DE 1813.528.4405 ±10%AZ733W–2A–18D AZ733W–2A–18DE 2418.037.9720 ±15%AZ733W–2A–24D AZ733W–2A–24DE 4836.075.92,880 ±15%AZ733W–2A–48D AZ733W–2A–48DE 6045.094.84,500 ±15%AZ733W–2A–60D AZ733W–2A–60DE 11082.5183.316,800 ±15%AZ733W–2A–110DAZ733W–2A–110DE。

ASSIC码对照表编码对应字符：✔：\u2714✘：\u2718<script type="text/javascript">var aaa = "\u2718";document.write(aaa);</script>测试ASCII码的⽅法：在记事本中，按住ALT键，同时⽤⼩键盘输⼊⼗进制的ASCII码，然后松⼿，就可以看到效果了！ASCII值控制字符ASCII值控制字符ASCII值控制字符ASCII值控制字符0NUT32(space)64@96、1SOH33！65A97a2STX34”66B98b3ETX35#67C99c4EOT36$68D100d5ENQ37%69E101e6ACK38&70F102f7BEL39,71G103g8BS40(72H104h9HT41)73I105i10LF42*74J106j11VT43+75K107k12FF44,76L108l13CR45-77M109m14SO46.78N110n15SI47/79O111o16DLE48080P112p17DCI49181Q113q18DC250282R114r19DC351383S115s20DC452484T116t21NAK53585U117u22SYN54686V118v23TB55787W119w24CAN56888X120x25EM57989Y121y26SUB58:90Z122z27ESC59;91[123{28FS60<92\124|29GS61=93]125}30RS62>94^126~31US63?95—127DELNUL VT 垂直制表SYN 空转同步SOH 标题开始FF ⾛纸控制ETB 信息组传送结束STX 正⽂开始CR 回车CAN 作废ETX 正⽂结束SO 移位输出EM 纸尽EOY 传输结束SI 移位输⼊SUB 换置ENQ 询问字符DLE 空格ESC 换码ACK 承认DC1 设备控制1FS ⽂字分隔符BEL 报警DC2 设备控制2GS 组分隔符BS 退⼀格DC3 设备控制3RS 记录分隔符HT 横向列表DC4 设备控制4US 单元分隔符LF 换⾏NAK 否定DEL 删除键盘常⽤ASCII码ESC键VK_ESCAPE (27)回车键：VK_RETURN (13)TAB键：VK_TAB (9)Caps Lock键：VK_CAPITAL (20)Shift键：VK_SHIFT ($10)Ctrl键：VK_CONTROL (17)Alt键：VK_MENU (18)空格键：VK_SPACE ($20/32)退格键：VK_BACK (8)左徽标键：VK_LWIN (91)右徽标键：VK_LWIN (92)⿏标右键快捷键：VK_APPS (93)Insert键：VK_INSERT (45)Home键：VK_HOME (36)Page Up：VK_PRIOR (33) PageDown：VK_NEXT (34)End键：VK_END (35)Delete键：VK_DELETE (46)⽅向键(←)：VK_LEFT (37)⽅向键(↑)：VK_UP (38)⽅向键(→)：VK_RIGHT (39)⽅向键(↓)：VK_DOWN (40)F1键：VK_F1 (112)F2键：VK_F2 (113)F3键：VK_F3 (114)F4键：VK_F4 (115)F5键：VK_F5 (116)F6键：VK_F6 (117)F7键：VK_F7 (118)F8键：VK_F8 (119)F9键：VK_F9 (120)F10键：VK_F10 (121)F11键：VK_F11 (122)F12键：VK_F12 (123)Num Lock键：VK_NUMLOCK (144)⼩键盘0：VK_NUMPAD0 (96)⼩键盘1：VK_NUMPAD0 (97)⼩键盘2：VK_NUMPAD0 (98)⼩键盘3：VK_NUMPAD0 (99)⼩键盘4：VK_NUMPAD0 (100)⼩键盘5：VK_NUMPAD0 (101)⼩键盘5：VK_NUMPAD0 (101)⼩键盘6：VK_NUMPAD0 (102)⼩键盘7：VK_NUMPAD0 (103)⼩键盘8：VK_NUMPAD0 (104)⼩键盘9：VK_NUMPAD0 (105)⼩键盘.：VK_DECIMAL (110)⼩键盘*：VK_MULTIPLY (106)⼩键盘+：VK_MULTIPLY (107)⼩键盘-：VK_SUBTRACT (109)⼩键盘/：VK_DIVIDE (111)Pause Break键：VK_PAUSE (19)Scroll Lock键：VK_SCROLL (145)ASCII码中：第0～32号及第127号是控制字符，常见的控制符如：007 = 07 = U+0007 : BELL 转义符：\a 响铃 008 = 08 = U+0008 : BACKSPACE 转义符：\b 退格键 009 = 09 = U+0009 : HORIZONTAL TABULATION 转义符：\t Tab键 010 = 0A =U+000A : LINE FEED 转义符：\n 换⾏符 011 = 0B = U+000B : VERTICALTABULATION 转义符：\v 垂直 Tab 符 012 = 0C = U+000C : FORMFEED 转义符：\f 换页符 013 = 0D = U+000D : CARRIAGERETURN 转义符：\r 回车键 027 = 1B = U+001B : ESCAPE 转义符：\e Esc 键第33～126号是字符，其中第48～57号为0～9⼗个阿拉伯数字；65～90号为26个⼤写英⽂字母，97～122号为26个⼩写英⽂字母，其余的是⼀些标点符号、运算符号等。

阿拉伯数字中文记忆编码对照表阿拉伯数字中文记忆编码对照表风之叶据网络整理00 眼镜、圈圈、串串 01 灵药、冬衣 02 铃儿 03 铃声、灵山 04 05 零食礼物 27 28 29 30 31 32 耳机、暗器、爱妻恶霸阿胶、恶狗、二舅山洞、山梨、森林山药、鲨鱼、山芋扇儿65 66 67 68 69 70 老虎、锣鼓溜溜球、露露、蝌蚪油漆、漏气喇叭、萝卜、腊八辣椒、牛角、烈酒麒麟、冰淇淋 06 领路 07 令旗08 领班、淋巴 09 菱角0 铃、领、令 1 衣、树 2 鹅、耳 3 伞、厦 4 石、丝5 钩、吾、乌贼6 柳、烟斗7 妻、镰刀、拐杖 8 发、麻花、葫芦 9 酒、球拍 10 衣领、蛇 11 筷子、双杠 12婴儿、燕儿 13 医生、雨伞、药膳 14 石狮、钥匙 15 鹦鹉、医务 16 石榴、杨柳17 仪器、拐杖、义气 18 衣钵、摇把、篱笆 19 药酒20 按铃、耳环 21 鳄鱼、阿姨 22 暗暗、鸳鸯 23 鞍山、和尚24盒子、饿死、闹钟25 二胡 26 河流、二流子00 呤呤33 金牌(闪闪) 、蝴蝶71 34 上司、绅士、丧事 72 35 35烟、珊瑚、晌午 73 36 山鹿、山路 74 37 山鸡、膻气75 38 沙发、伞把、伞兵 76 39 香蕉、三角裤、三脚架 77 40 司令、时令78 41 司仪、神医、诗意 79 42 丝袜、柿儿、思儿 80 43 四川、石山81 44 石狮、死尸、史诗 82 45 师傅、水壶、饰物 83 46 石榴84 47 司机、死棋 85 48 丝帕、丝瓜 86 49 石臼、石球87 50 武林、武士、五环旗 88 51 武艺、工人、狐狸 89 52 武二郎、吾儿 90 53午餐、火山91 54 护士、武士、巫师、钨丝 92 55 文物、污物93 56 物流、蜗牛、物理 94 57 武器95 58 王八、舞吧、尾巴 96 59 五角星 97 60 榴莲、秒表98 61 蝼蚁、老鹰、六·一节 99 62 驴儿、牛儿 100 63 庐山、硫酸64律师、螺丝、历史阿拉伯数字中文记忆编码对照表01 灵药02 蜥蜴、七一、起义企鹅、棋儿花旗参、鸡蛋骑士、骑士、气势、起誓积木、起舞犀牛、气流、七律漆器、蛐蛐西瓜、青蛙、奇葩气球、吃酒、祈求百灵、白领、柏林、巴黎白蚁、白药、布衣、八·一靶儿、白垩、白鹅、靶儿爬山、白鲨、巴山虎巴士、报时、笔试、拜师芭蕾舞、白虎、霸王八路、菠萝白旗爸爸、斑马白酒、芭蕉、斑鸠、八角酒令、精灵旧衣、球衣、就医、蚯蚓球儿救生圈、旧伞教师、旧时、旧事救护车、酒壶酒楼酒席、旧习酒吧、酒杯舅舅、胶卷、旧居人民币、满分铃儿03 铃声 04 零食 05 礼物06 领路 07 令旗 08 领班 09 菱角 0 洞 1 衣2 鹅3 伞4 丝5 钩6 烟斗7 妻8 发9 球拍 10 蛇11 筷子12 婴儿 13 医生 14 钥匙15 鹦鹉 16 杨柳17 义气 18 篱笆 19 药酒 20 按铃 21 阿姨 22 鸳鸯 23 鞍山 24饿死25 二胡 26 二流子27 耳机 28 恶霸29 阿胶30 山梨 31 山药 32 扇儿 33 闪闪34 绅士 35 珊瑚36 山鹿37 山鸡38 沙发39 香蕉 40 司令 41 司仪 42 柿儿 43 四川 44 石狮 45 师傅 46 石榴 47 司机 48 丝瓜 49 石臼50 武林51 武艺 52 武二郎 53 午餐 54 武士 55 文物56 物理57 武器58 王八59 五角星 60 榴莲 61 蝼蚁 62 驴儿 63 庐山 64 律师65锣鼓66 露露 67 油漆68 喇叭 69 牛角 70 麒麟71 蜥蜴 72 企鹅 73 花旗参 74 骑士75 起舞76 气流 77 漆器 78 奇葩 79 气球80 百灵81 白蚁82 白鹅83 白鲨 84 巴士 85 白虎 86 菠萝 87 白旗 88 爸爸 89 斑鸠 90 酒令 91 球衣92 球儿93 救生圈94 教师95 酒壶 96 酒楼97 酒席98 酒吧 99 舅舅 100满分。

国际贸易标准分类简介国际贸易标准分类（Standard International Trade Classification，简称：SITC）为用于国际贸易商品的统计和对比的标准分类方法。

简介它是一种用于国际贸易商品的统计和对比的标准分类方法。

现行“国际贸易标准分类”于1950 年7 月12 日由联合国经济社会理事会正式通过，目前为世界各国政府普遍采纳的商品贸易分类体系。

到2006 年为止，该标准分类经历了四次修改，最近的一次修改为第四次修订版，于2006 年3 月获联合国统计委员会第三十七届会议通过。

该分类法将商品分为为10 大类、63 章、223 组、786 个分组和1924 个项目。

部分目录在它的编号中第一位数字表示类、第二位数字表示章、第三位数字表示组、第四位数字表示分组。

如果对分组再进行细分，五位数即表示品目，六位数字表示细目。

以下是部分目录：0 -食品和活畜00-活的动物以外的其他动物的分裂 00 - Live animals other than animals of division01-肉及肉制品 01 - Meat and meat preparations02-乳制品和鸟蛋 02 - Dairy products and birds' eggs03-鱼（不是海洋哺乳动物），甲壳类，软体动物和水生无脊椎动物03 - Fish (not marinemammals), crustaceans, molluscs and aquatic invertebrates, and preparations thereof04-谷物和谷物制品 04 - Cereals and cereal preparations05-蔬菜和水果 05 - Vegetables and fruit06-糖，糖制品及蜂蜜 06 - Sugars, sugar preparations and honey07-咖啡，茶，可可，香料，及其制造 07 - Coffee, tea, cocoa, spices, and manufactures thereof08-喂养（不包括没有碾磨的谷物） 08 - Feeding stuff for animals (not including unmilled cereals)09-杂项食品产品和筹备工作 09 - Miscellaneous edible products and preparations1 -饮料和烟草11-饮料 11 - Beverages12-烟草及烟草制品 12 - Tobacco and tobacco manufactures2 -非食用原料(燃料除外)21-皮，表皮和毛皮，原料 21 - Hides, skins and furskins, raw 22-石油种子和含油果实 22 - Oil-seeds and oleaginous fruits 23-天然橡胶（包括合成和再生） 23 - Crude rubber (including synthetic and reclaimed)24-软木及木 24 - Cork and wood25-纸浆及废纸 25 - Pulp and waste paper26-纺织纤维（毛条除外和其他精梳羊毛）及其废料（不成纱或布料制造的）26 - Textile fibres (other than wool tops and other combed wool) and their wastes (not manufactured into yarn or fabric) 27-原油肥料，矿产和原油（不包括煤，石油和宝石）27 - Crude fertilizers, other than those of division and crude minerals (excluding coal, petroleum and precious stones)28-金属矿砂及金属废料 28 - Metalliferous ores and metal scrap29-原油动物和植物材料制 2 9 - Crude animal and vegetable materials, nes3 -矿物燃料，润滑剂和原料32-煤，焦煤及煤球 32 - Coal, coke and briquettes33-石油，石油产品及副产品 33 - Petroleum, petroleum products and related materials34-天然气(天然和制造的) 34 - Gas, natural and manufactured 35-电流 35 - Electric current4 -动物和植物油，油脂和蜡41-动物油脂 41 - Animal oils and fats42-固定油脂，原油，成品或分馏 42 - Fixed vegetable fats and oils, crude, refined or fractionated43-动物或植物油脂，加工过的 ;不宜食的混合物或动物或植物脂肪或油类，不另说明 43 - Animal or vegetable fats and oils, processed; waxes of animal or vegetable origin; inedible mixtures or preparations of animal or vegetable fats or oils, n.e.s5 -化学成品及有关产品51-有机化工产品 51 - Organic chemicals52-无机化学品 52 - Inorganic chemicals53-染料，鞣革料 53 - Dyeing, tanning and colouring materials54-医药产品 54 - Medicinal and pharmaceutical products55-精油及香膏和香水原料 ;厕所，抛光和清洗的准备工具 55 - Essential oils and resinoids and perfume materials; toilet, polishing and cleansing preparations56-肥料 56 - Fertilizers (other than those of group 272) 57-初级形状塑料 57 - Plastics in primary forms58-非塑料，初级形状 58 - Plastics in non-primary forms59-化学材料及制品，不另说明59 - Chemical materials and products, n.e.s6 –按原料分类的制成品61-皮革，皮革制品，不另说明，并经处理的毛皮61 - Leather, leather manufactures, nes, and dressed furskins62-橡胶制品，不另说明 62 - Rubber manufactures, nes63-软木及木制品（不包括家具） 63 - Cork and wood manufactures (excluding furniture)64-纸，纸板和纸浆的文章，纸或纸板 64 - Paper, paperboard and articles of paper pulp, of paper or of paperboard65-纺织纱线，织物，制成品，不另说明，以及相关产品65 - Textile yarn, fabrics, made-up articles, nes, and related products66-非金属矿产制品，不另说明66 - Non-metallic mineral manufactures, nes67-钢铁 67 - Iron and steel68-有色金属 68 - Non-ferrous metals69-金属制品 69 - Manufactures of metals, nes7 -机械和运输设备71-发电机械设备 71 - Power-generating machinery and equipment72-个别工业专用机械 72 - Machinery specialized forparticular industries73-金属加工机械 73 - Metalworking machinery74-一般工业机械和设备和机器零件，不另说明 74 - General industrial machinery and equipment, nes, and machine parts,nes 75-办公室机器和自动资料处理仪器 75 - Office machines and automatic data-processing machines76-电信和录音及音响设备和仪器 76 - Telecommunications and sound-recording and reproducing apparatus and equipment 77-电气机械，仪器和用具，巢，及零件（包括非电气同行，电家庭型设备） 77 - Electrical machinery, apparatus and appliances, nes, and electrical parts thereof (including non-electrical counterparts, nes, of electrical household-type equipment) 78-道路车辆（包括气垫车辆）78 - Road vehicles (including air-cushion vehicles)79-其他运输设备 79 - Other transport equipment8 -杂项制品81-预制建筑物，管道，发热及照明装置和设备，不另说明81 - Prefabricated buildings; sanitary, plumbing, heating andlighting fixtures and fittings, nes82-家具及其零件，床上用品，床垫，床垫，软座垫及类似的填充制品82 - Furniture, and parts thereof; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings83-旅游用品，手袋及类似容器83 - Travel goods, handbags and similar containers84-服装及衣服配件 84 - Articles of apparel and clothing accessories85 -鞋子 85 - Footwear87-专业，科学及控制用仪器及器具 87 - Professional,scientific and controlling instruments and apparatus, nes 88-摄影仪器，设备和供应品，光学产品 ;钟表 88 - Photographic apparatus, equipment and supplies and optical goods, nes;watches and clocks89-杂项制品,不另说明 89 - Miscellaneous manufactured articles, nes9 –未分类的商品91 -邮政包裹并无按实物 91 - Postal packages not classified according to kind93 -特殊交易和商品并无按实物93 - Special transactions and commodities not classified according to kind96 -硬币（金币除外），没有法定货币 96 - Coin (other thangold coin), not being legal tender97 -金，非货币（不包括黄金矿砂及其精矿）97 - Gold, non- monetary (excluding gold ores and concentrates)。

在安装富士达电梯时动慢车有时会发生故障造成电梯慢车不运行1、电机不得电——#36不吸合--＃1E -—未吸合造成2、电机得电但不开闸-—抱闸检测回路断开-—故障6 系3、电机得电但开闸不走——抱闸检测回路不断开-- 故障6 系4、电梯在机房可以走慢车在轿顶不运行-—防撞头开工未封、轿顶通讯不良呼叫记录开始：按动上按钮,同时将EQDO 开关切到ON ,然后放开.实行:按动上按钮，上面的一层（按住2 秒以上,顶层)即被预约。

按动下按钮，下面的一层(按住2 秒以上，底层)即被预约。

按住中按钮，以上被预约的楼层即被记录下来。

保持按住中按钮，门将被关闭。

结束:将EQDO 开关切到OFF .安装运行开始：将轿顶、轿内的自动/ 手动开关均切换到自动位。

按住下按钮,同时将EQDO 开关切到ON ，然后放开按钮。

运转:按动上按钮，轿厢慢车向上。

按动下按钮,轿厢慢车向下。

结束：将EQDO 开关切到OFF 。

楼层选择器的错开开始：按住上按钮，同时将EQDO 开关切到ON ，然后放开按钮实行：按动上按钮，上面的一层（按住2 秒以上，顶层)即被预约。

按动下按钮，下面的一层（按住2 秒以上，底层）即被预约。

按住中按钮，以上被预约的楼层上的选择器即错开。

结束：将EQDO 开关切到OFF在“呼叫记录”,“楼层选择器的错开”的实行过程中,所记录的呼叫楼层和选择器错开的楼层将会在LED 的bit0～bit7 上以2 进制数显示出来.（操作开始之初显示的是当时轿厢所处的楼层)bit 7 □□□□□□□□□□□□bit 6 □□□□□□□□□□□□bit 5 □□□□□□□□□□□□bit 4 □□□□□□□□□□□□bit 3 □□□□□□□■■■■■bit 2 □□□■■■■□□□□■bit 1 □■■□□■■□□■■□bit 0 ■□■□■□■□■□■□表示-—1——2——3--4--5—-6--7—-8-—9-—10-11—12 ……平常表示【SEL=0 数据=0 】时LED 的显示灯亮高速闪动低速闪动熄灭Bit7有项目代码—-————无项目代码Bit6地震时管制运行火灾时，自备电，漏水时的管制停车运转平常Bit5与IF61 ，IF66 通信断开——-——-与IF61 ，IF66 通信正常Bit4与SV ，其它号机通信断开与SV ( MAIN )通信断开-—-与SV ，其它号机通信正常Bit3与COB/ 候梯厅电脑通信断开———*6与COB/ 候梯厅电脑通信正常Bit2启动禁止高速运转禁止高速运转可能Bit1门关闭完成位置门中间位置---门打开完成位置Bit0门区内——-—-—富士达电梯控制屏操作方法E411中文翻译( 故障灯)1.DZ或ADZ 与MCSS的命令状态不一致2。

Intrusion Detection with FW 6.60 Technical NoteTable of contents1Introduction31.1Applications (3)1.2Common product platform (CPP) (3)1.3Limitations (3)2Technical Background & FAQ32.1What is an intruder? (3)2.2How can I distinguish intruders from animals? (3)2.3What is a camera calibration and when do I need it? (4)2.4Where do false alerts in trees come from? (4)2.5Why are objects detected so late? (5)2.6How should I set up the camera view? (5)2.7How far into the distance can Intelligent Video Analytics / Essential Video Analytics detect objects? (5)3Setup63.1General advice (6)3.2Small, controlled environments, e.g. indoor (6)3.3Climbing walls or throwing across walls (6)3.4Façade protection (7)3.5Medium areas (7)3.6Large areas (7)3.7Infrared illumination & insect swarms (7)3.8Shaking / vibrating camera (8)3.9Optimization via forensic search (8)1IntroductionThis technical note describes the best practices for and answers commonquestions regarding intrusion detection using Intelligent Video Analytics orEssential Video Analytics with FW 6.60.1.1Applications④Perimeter protection④Sterile zones④Warehouse after hours④Solar plants④Façade protection④… and wherever and whenever no one is supposed to be within an area during a certain time1.2Common product platform (CPP)Bosch cameras can be clustered by their common product platform. As different platforms offer a different amount of processing power, this can make differences in the performance. For an overview of the different product platforms and the cameras belonging to them, see the tech note on Video Content Analysis (VCA) Capabilities per Device.1.3Limitations④Different performance and setup options on Intelligent Video Analytics on CPP4 and Essential Video Analytics on theone hand, and Intelligent Video Analytics on CPP6/7/7.3 on the other hand④Does not work for well-populated and crowded scenes④Does not work on elevators or other conveyance belts④Does not work if camera is moving2Technical Background & FAQ2.1What is an intruder?If we talk about intruders, we typically mean people entering areas which are off-limits to them. Depending on the application, however, the people may also sit in vehicles or bikes. Furthermore, professional intruders typically do not walk into the area, but crawl or roll to present the camera the least view of them that is possible.2.2How can I distinguish intruders from animals?You can’t. It is possible to separate standing and walking people from smaller animalslike dogs, foxes or rabbits by their size, but if we talk about professional intruderscrawling or rolling into the scene, then most of the time the difference to the animal in question is not large enough for a robust classification. There is currently no videoanalytic for intrusion detection on the market that can really solve this problem. If youare only interested in walking / standing persons, the automatic object classification canbe used. See the tech note on object classification for configuration details.Intruders: Walking, crawling, rollingA crawling person looks similar to a dog2.3 What is a camera calibration and when do I need it?A camera calibration teaches the camera about the perspective in the scene. Due to perspective, in the rear of the video images the persons appear smaller, they cover less pixel in the image, though their real size is the same. Perspective is thus needed whenever the real size and speed of objects is needed, as well as an automatic perspection correction of object sizes. Calibration becomes more important the larger the area covered by a single camera is. For small areas (10-20m distance), the perspective effect is typically neglectable, for larger areas, it becomesessential for robust performance. Note that the longer the distance, the less reliable object sizeand speed estimations become, as less pixel are available per meter.To calibrate, the position of the camera in relation to a single, planar ground plane is described by the elevation of the camera, the angles (tilt, roll) towards the ground plane and the focal length of the lens. As calibration is only done in reference to a single, planar ground plane, scenes with stairs, escalators, several ground levels, facades or rising ground cannot be calibrated correctly. If the rising ground only differs a little from the planar ground plane, a best effort calibration can be tried. In all other cases, please refrain completely from using a calibration and set the object size filters, if needed, for the different image regions by hand.Further information on calibration can be found in the VCA tech note on geolocation.2.4 Where do false alerts in trees come from?All video analytics algorithms for intrusion detection are based on three coretechnologies: Change detection, motion estimation and background subtraction.∙ Change detection evaluates per block whether the content of the block has changeswithin the last second. This technology is used in MOTION+. The disadvantage isthat every change in the image, be it an illumination change or actual motion,triggers the blocks as changed. Note that the after-image of the object also triggers the blocks.∙ For motion estimation, also called optical flow, it is evaluated for every part in theimage where this part was in the last image, or a second ago. Flow is based primarily on this technology.∙ For background subtraction, one, multiple or stochastic background images arelearned over time and updated continuously. Every difference to the learnedbackground is then extracted as a moving foreground object and tracked over time.Intelligent Video Analytics and Essential Video Analytics use this technology in combination with motion estimation.Manual object size filter (yellow) can also compensate perspective Perspective: Objects in the rear appear smaller ChangedetectionMotionestimationBackgroundsubtraction & trackingNow for all three technologies, if the wind moves a branch, then there is a distinct change to the position of the branch a second ago and the branch is detected as a potential change / motion / moving object. By combining the different technologies, tracking the objects over time and evaluating the consistency of motion, robustness can be achieved to suppress these kind of moving objects the user is typically not interested in.2.5 Why are objects detected so late?Objects are actually detected as soon as they appear, however, to validate that they are interesting objects with consistent motion and not spurious detections by wind in trees or flags or the falling of rain drops and snowflakes, Intelligent Video Analytics and Essential Video Analytics hold the detection back for a few frames. To get the objects as soon as theyappear, please go to MetadataGeneration->Tracking and disable the noise suppression. For Intelligent Video Analytics on CPP6/7/7.3, in addition raise the sensitivity to max.2.6 How should I set up the camera view?If possible make sure that intruders cross the field of view instead of walking towards the camera. Due to the perspective, a person walking toward the camera does not cross as many pixel in the image and does not have much apparent motion as a person crossing the camera view. Thus it is more difficult to detect and separate from noise. Higher elevation is preferred due to the same reason. Though higher poles are more expensive and prone to shaking, the lower a camera is mounted the less apparent motion objects walking toward the camera have, and the harder they are to detect. Note also that the more area is covered by the selected lens, the farther an object must travel to cross the same amount of pixel.2.7 How far into the distance can Intelligent Video Analytics / Essential VideoAnalytics detect objects?A general answer cannot be given, as this depends on the chosen camera, the chosen video aspect ratio, the camera perspective, on the focal length and on the light and weather conditions. Furthermore, both Intelligent Video Analytics and Essential Video Analytics are not directly computed on the original camera resolution but on a reduced one due to computational power limits. For an overview of which resolution is used on which camera, please see the tech note on VCA Capabilities per Device.Generally, a larger focal length indicates a larger zoom factor and a smaller width of the field of view. So one can see farther into the distance but less far to the left and right than with a smaller focal length. Furthermore, with a larger focal length, the unobserved area in front of the camera is much larger as well. Another trade-off for the larger detection range of larger focal length is that motion towards the camera takes longer to detect.The detection distance also depends on the size of the object, with longer detection ranges for larger objects. Wind in trees: branches moveConsistency of motionMotion towards thecamera is lessDistance resolution is best near the camera, and degrades heavily into the distance where a single pixel in the internal resolution often covers several meters of ground. Here an example for Essential Video Analytics:Use the Bosch Video Analytics and Lens Calculator at /LensCalculator/html/lens-calculator.html to determine video analytics detection distances for specific cameras, lenses and focal lengths.3SetupConfiguration of intrusion detection is separated into several applications, which all have their own characters and require different optimizations. For detection of intruding ships, please see the tech note on IVA 6.10 Ship Tracking. If you are interested in an application where you need to be alerted already if only a part of the intruder, like a hand or an arm, trespasses into the alarm zone, please see the tech note on Museum Mode FW 6.30.3.1General advice-Alarm field preferable to line crossing: For a line crossing to trigger, the object needs to be detected before and after the line. In combination with challenging situations like storm in trees, where detection can be delayed in favour of false alarm suppression, the placement of the line needs to be done with care. An alarm field, which triggers whenever an object is detected inside, covers larger areas and is thus inherently more robust.-Scheduling: This is available on DINION & FLEXIDOME cameras. Configure one or both VCA profiles, then change the VCA configuration to “Scheduled” and define the times where which VCA profile should run.-Alarm-based recording / adjustment of recording frame rates: Can be triggered by any alarm. Configurable via Recording -> Profiles, or via the alarm task editor for full flexibility3.2Small, controlled environments, e.g. indoor-Object size: Intelligent Video Analytics and Essential Video Analytics do not know whether a small object in the image is actually a small object, or a large object that is far away. Therefore they will detect and track even the smallest objects like leaves and small garbage blown by the wind in the foreground or small animals in the default settings. To avoid that, set the min object size, either in the MetadataGeneration -> Tracking, where it will completely suppress them, or filter them out in your alarm task.-Calibration: Perspective correction of the object size is not necessary for small environments for intrusion detection. -Fast object detection: In indoor applications, always go to MetadataGeneration->Tracking, disable the noise suppression and (Intelligent Video Analytics on CPP6/7/7.3) raise the sensitivity to max. Noise suppression and object validation is only needed for outdoor environments. In controlled, small outdoor applications, that is much tarmac and no trees, this can also be disabled.3.3Climbing walls or throwing across walls-Calibration: Don’t use any calibration. Flying and climbing objects will not be detected & tracked well if camera is calibrated.3.4Façade protection-Calibration: As the façade is vertical, calibration is not possible at all.-Fast object detection: As the façade is mostly tarmac, and if no trees are nearby who’s shadows can fall on the façade, then you don’t need noise suppression and object validation. Go to MetadataGeneration->Tracking, disable the noise suppression and (Intelligent Video Analytics on CPP6/7/7.3) raise the sensitivity to max.3.5Medium areas-Calibration: If the ground is more or less flat, then add calibration to teach the camera about perspective. Only thus is the most robust detection possible.-Noise suppression: Noise suppression is enabled by default and should stay that way. Use Intelligent Video Analytics on CPP6/7/7.3 cameras with noise suppression STRONG for best noise suppression.-Use scenario default “Intrusion (one field)” available from FW 6.60 onwards. Automatically enables 3D tracking, sets noise suppression to STRONG, and adds object filters targeted for suppressing non-persons. Needs calibrated camera.3.6Large areas-Calibration: If the ground is more or less flat, then add calibration to teach the camera about perspective. Only thus is the most robust detection with largest detection ranges possible.-Noise suppression: Noise suppression is enabled by default and should stay that way. Use noise suppression MEDIUM where available for longest detection distances while still suppressing many false alerts.-Double detection distance: For Intelligent Video Analytics on CPP6/7/7.3 with FW ≥6.30, detection distance for moving objects can be doubled by calibration the camera, using a 3D tracking mode, and setting noise suppression to OFF or MEDIUM.-Use scenario default “Intrusion (two fields)” available from FW 6.60 onwards. Automatically sets 3D tracking and noise suppression to MEDIUM where available and STRONG otherwise, thus enabling longest detection distances.Also adds a second detection field which also needs to be entered by alarm objects as well as object filters targeted for suppressing non-persons to further false alarm suppression. Needs calibrated camera.3.7Infrared illumination & insect swarmsInsects are drawn to the light of infrared illuminators. If the infrared illuminators are included in the camera or positioned close nearby, this means that a myriad of insects will flutter through the video and cause false alerts. Therefore always position the illuminator in at least 80cm distance to the camera.Though false alerts due to insects cannot be suppressed completely, they are already greatly reduced in Intelligent Video Analytics on CPP6/7/7.3 cameras from FW 6.10 onward. With Intelligent Video Analytics on CPP4 cameras, with Essential Video Analytics, or to generally further reduce false alerts, use multi-line crossing or combine several single alarm rules and detection via VCA task script language. From FW 6.60 onwards, alarming on an object inside, entering or leaving up to three alarm fields in a specified order is possible directly via the GUI, and also part of the scenario default “Intrusion (two fields)”. For FW <6.60, VCA task scripting is needed.For scripting, go to the video analytics configuration and open the task page. Right-click on the video and select Advanced -> VCA Task Editor. A separate popup with the current VCA task script will appear. Here is an example configuration, which can be copied and pasted into the VCA task script editor. Further information about VCA tasks script language and example scripts are available in the VCA task script language manual and a separate tech note.VCA task script example: Alarm if an object enters field and afterwards, within 30 seconds, crosses the line in the middle of the field://Definition of task primitivesResolution := { Min (-1, -1) Max (1, 1) };Field #1 := { Point (-0.6, 0.95) Point (-0.25, -0.95)Point (0.25, -0.95) Point (0.6, 0.95) DebounceTime (0.50) };Line #1 := { Point (0.0, -0.95) Point (0.0, 0.95)DebounceTime (0.50) };//@Task T:0 V:0 I:1 "Enter Field and Line" { external Event #1:={EnteredField #1before (*,30) CrossedLine #1 where first.oid == second.oid };//@}3.8 Shaking / vibrating cameraWhen the camera shakes, the content of the whole image shakes with it. The effects are especially visible around edges, as these cause the most change. Thus, false alerts can occur and the tracking of existing objects can be disrupted.Compensation of shaking and vibrating cameras within Intelligent Video Analytics on CPP6/7/7.3 cameras was introduced with FW 6.10 and perfected with FW 6.20. It is always active there. With Intelligent Video Analytics CPP4 cameras and with Essential Video Analytics, no compensation for shaking cameras from video analytics side is possible.3.9 Optimization via forensic searchThere are two parts of the configuration of Intelligent Video Analytics and Essential Video Analytics. The first part defines the object detection and tracking, also called metadata generation. This includes camera calibration, selection of thetracking mode, masking areas from the processing and defining idle / removed debounce times. This first part needs to be done initially and cannot be changed afterwards.The second part of the configuration evaluates the metadata and includes tasks like line crossing, object in field and more. This second part can be fully evaluated and optimized using forensic search. To do so, record video including the events to be detected. Then use a forensic search capable viewing client. Define or adapt your alarm tasks, and evaluate whether all events are detected correctly and how many false alerts are still left.Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 585630 GrasbrunnGermany© Bosch Sicherheitssysteme GmhH, 2018。

好用的ASCII 码对照表完整版信息在计算机上是用二进制表示的，这种表示法让人理解就很困难。

因此计算机上都配有输入和输出设备，这些设备的主要目的就是，以一种人类可阅读的形式将信息在这些设备上显示出来供人阅读理解。

为保证人类和设备，设备和计算机之间能进行正确的信息交换，人们编制的统一的信息交换代码，这就是ASCII码表，它的全称是“美国信息交换标准代码”。

八进制十六进制十进制字符八进制十六进制十进制字符00000nul1004064@ 01011soh1014165A 02022stx1024266B 03033etx1034367C 04044eot1044468D 05055enq1054569E 06066ack1064670F 07077bel1074771G 10088bs1104872H 11099ht1114973I 120a10nl1124a74J 130b11vt1134b75K 140c12ff1144c76L 150d13er1154d77M 160e14so1164e78N 170f15si1174f79O 201016dle1205080P 211117dc11215181Q 221218dc21225282R 231319dc31235383S 241420dc41245484T251521nak1255585U 261622syn1265686V 271723etb1275787W 301824can1305888X 311925em1315989Y 321a26sub1325a90Z 331b27esc1335b91[ 341c28fs1345c92\ 351d29gs1355d93] 361e30re1365e94^ 371f31us1375f95_ 402032sp1406096' 412133!1416197a 422234"1426298b 432335#1436399c 442436$14464100d 452537%14565101e 462638&14666102f 472739`14767103g 502840(15068104h 512941)15169105i 522a42*1526a106j 532b43+1536b107k 542c44,1546c108l 552d45-1556d109m 562e46.1566e110n 572f47/1576f111o 603048016070112p 613149116171113q623250216272114r633351316373115s643452416474116t653553516575117u663654616676118v673755716777119w703856817078120x713957917179121y723a58:1727a122z733b59;1737b123{743c60<1747c124|753d61=1757d125}763e62>1767e126~773f63?1777f127delASCII码对照表在Web开发时，如下的ASCII码只要加上&#和;就可以变成Web可以辨认的字符了在处理特殊字符的时候特别有用，如：' 单引号在数据库查询的时候是杀手，但是如果转换成'（注意：转换后的机构有：&# +字符的ASCII码值+; 三个部分组成）再来存数据库，就没有什么影响了。

Isolated, Voltage or Current Input7B33Rev. 0Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies.One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.Tel: 781.329.4700 Fax: 781.326.8703© 2004 Analog Devices, Inc. All rights reserved.FEATURESInterfaces, amplifies, and filters unipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.Module features a nonlinearity of +0.02% maximum and an accuracy of +0.1% maximum (+0.01% typical).All 7B33 series modules are mix-and-match and Hot Swappable.APPLICATIONSIndustrial signal conditioning Industrial signal isolation Industrial signal filteringPRODUCT OVERVIEWThe 7B Series of signal conditioners feature small size, low cost and a wide output voltage range for a variety of applications including process control and factory-floor environments. The single-channel 7B modules accept inputs from a range of transducers and are fully rated over the extended -40o C to +85o C industrial temperature range. All 7B Series modules are rated for a nominal power supply input of +24 VDC; and, for maximum flexibility, they will accept supply voltages in the +14 VDC to +35 VDC range. The input modules, with the exception of the 7B21, provide a high-level output voltage that is factory configured for either the +1 V to +5 V or 0 V to +10 V range. The 7B21 is a unity gain, isolated input module with aninput/output range of +10V . Output modules are available that provide either isolated process current or isolated bipolarvoltage output. Model 7B39 converts either a +1 V to +5 V input to a 4 to 20 mA output or a 0 V to +10 V input to a 0-20 mAoutput. The input/output ranges of the 7B39 are factoryconfigured. The 7B22 is a unity gain module that provides an isolated +10V output signal. All modules have a universal pin-out and may be readily hot-swapped under full power without disrupting field wiring. Each module accepts analog transducer signals and transfers them to a process control or factory data collection system without the inherent noise, non-linearity, drift and extraneous voltages which frequently accompany the signals.FUNCTIONAL BLOCK DIAGRAMFigure 1. 7B33 Functional Block DiagramThe modules feature a maximum nonlinearity of +0.02% and are factory calibrated to guarantee a maximum accuracy specification of +0.1%.The 7B Series offers up to 1500 V rms continuous common mode voltage isolation and 120 V rms of field wiring input protection. The power supplies necessary to drive each of the individual module’s input circuitry are internally isolated,enabling the 7B Series modules to offer true channel-to-channel isolation of the input signals.The modules directly accept analog signals fromthermocouples, RTDs, current loop powered transmitters, and other process control signals. The 7B Series modules amplify, linearize, isolate, protect and convert the transducer output signals to standardized analog inputs for high-level analog I/O subsystems. The 7B Series Subsystem consists of 19-inch rack-compatible hardware (model AC 1363), with universal mounting backplane and a family of plug-in (up to 16 perbackplane) input and output signal conditioning modules. Four-, eight-, and sixteen-channel backplanes are available. Each backplane incorporates screw terminals for easy power connections and field wiring, and includes a 25-pin D-type connector for interfacing the high-level single-ended voltage outputs to the user’s equipment. Gold-plated sockets are provided on each channel of the backplane to ensure the reliability of each module’s electrical connection.7B33Rev. 0 | Page 2 of 8GENERAL DESCRIPTIONThe 7B33 is a single-channel signal conditioning module that interfaces, amplifies and filters unipolar voltage inputs andprovides a protected precision output of either +1 V to +5V or 0 V to +10 V . To measure a process current input, a plug-on 250Ω current sensing resistor, Model AC1391, may be installed directly on the 7B backplane, using available pin sockets. The external current sense resistor allows the current loop to be maintained even when the module is removed from the backplane. Model 7B33 features a nonlinearity of +0.02% maximum and an accuracy of +0.1% maximum (+0.01% typical). To accurately measure low level signals in electrically noisy environments, 1500 V rms of galvanic transformer-based isolation with a common mode rejection (CMR) of 105 dB @ 50/60 Hz is provided. Rated to operate with a nominal +24 VDC supply, Model 7B33 is mix-and-match and hot-swappable with other 7B Series input modules, so it can be inserted or removed from any socket in the same backplane without disturbing system power.The two input pins of Model 7B33 are fully protected up to 120 V rms line voltage. A one-pole 100 Hz filter preconditions the input signal prior to amplification by a low drift input amplifier.Amplitude modulation is used to implement transformer isolation (1500 V rms input-to-output and power). Isolated front-end circuitry power is supplied by a DC/DC converter. The output section contains a two-pole low pass filter (-3 dB @ 100 Hz), a buffer amplifier and a power oscillator. The two-pole output filter and subsequent buffer ensures that a low noise, low impedance (<1Ω) signal is available at the output to drive loads of 2 k Ω minimum.Figure 27B33Rev. 0 | Page 3 of 87B33 Models AvailableModel Input Range Output Range 7B33-01-1 +1 V to +5 V +1 V to +5 V 7B33-01-2 0 V to +5 V 0 V to +10 V 7B33-01-1 +4 mA to +20 mA 1 +1 V to +5 V 7B33-01-20 mA to +20 mA 10 V to +10 V7B33 Specifications(typical @ +23°C ±5°C and V s = +24 V dc)Description Model 7B33Input Range1Standard Ranges +1 V to +5 V; 0 V to +5 V (Refer to Model Table) Custom RangesNot Available*Output Range Options (R L > 2 k Ω)+1 V to +5 V or 0 V to +10 V Accuracy1Initial @ +25°C ±0.01% Span (±0.1% Span, maximum) Nonlinearity 3±0.02% Span, maximum Input Offset vs. Temperature N/A 4 Span vs. Temperature ±15 ppm/°C Output Offset vs. Temperature ±0.003% span/°C Input Bias Current±0.1 nA Input ResistancePower ON 2 M ΩPower OFF30 k Ω, minimum Output Noise5 MHz Bandwidth6 mV peak 10 Hz to 100 kHz Bandwidth 0.4 mV rms 0.1 Hz to 10 Hz Bandwidth 4 µV peak Bandwidth, -3 dB100 Hz Output Rise Time, 10% to 90% Span 10 msCommon-Mode Voltage (CMV) Input-to-Output and Power1500 V rms continuousCommon Mode Rejection (CMR)Input-to-Output and Power @ 50/60 Hz 105 dBInput Protection120 V rms, continuous7B33Rev. 0 | Page 4 of 8Input Transient Protection ANSI/IEEE C376.90.1-1989IEEE-STD 472 IEC 255-4, Class II Output Resistance < 1 ΩVoltage Output ProtectionContinuous Short to Ground Power SupplyVoltage Range, Operating +14 V dc to +35 V dc Current+20 mA, maximumDSensitivity ±0.0001%/% of Vs Mechanical Dimensions1.663" x2.11" x 0.563"(42.24 mm x 53.6 mm x 14.3 mm)Weight 60 gramsEnvironmentalTemperature RangeOperating -40°C to +85°C Storage -40°C to +85°C Relative Humidity, 24 hours 0 to 90% @ +60°C non-condensing ESD Sensitivity IEC 801-2, Level 2RFI Susceptibility±0.5% Span error @ 400 MHz, 5 Watt, 3 ftWarm-up time required to meet specifications is approximately 10 minutes. * Contact factory for OEM requirements. 1Model 7B33 may be used to measure a process current input by installing a 250 Ω current sensing resistor, such as Model AC1391, on the backplane. With this resistor, the current loop is maintained even when the 7B33 module is removed from the backplane. 2Includes the combined effects of repeatability, hysteresis, and nonlinearity. 3Nonlinearity is calculated using best-fit straight line method. 4Input offset term is included in the output offset specification. Specifications subject to change without notice.7B33Rev. 0 | Page 5 of 8PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONSFigure 3 7B33 Input Field ConnectionsTable 1. Pin Function Descriptions—PinNo. Input Module Function Output Module Function 0 SENSOR INPUT NOT USED 1 INPUT HIGHOUTPUT HIGH 2 INPUT LOWOUTPUT LOW3 POWER SUPPLY (DC) POWER SUPPLY (DC)4 OUTPUT V OLTAGE INPUT V OLTAGE5 OUTPUT & POWERCOMMONINPUT AND POWER COMMONFigure 4 . Model 7B Series Module, with pin-out assignments.ESD CAUTIONESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges.Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.7B33Rev. 0 | Page 6 of 8OUTLINE DIMENSIONSFigure 5. Outline Dimensions7B33 NOTESRev. 0 | Page 7 of 87B33Rev. 0 | Page 8 of 8NOTES© 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. D05175-0-10/04(0)。

常用ASCII码对照表1. ASCII码在计算机内部，所有的信息最终都表示为一个二进制的字符串。

每一个二进制位（bit）有0和1两种状态，因此八个二进制位就可以组合出256种状态，这被称为一个字节（byte）。

也就是说，一个字节一共可以用来表示256种不同的状态，每一个状态对应一个符号，就是256个符号，从0000000到。

上个世纪60年代，美国制定了一套字符编码，对英语字符与二进制位之间的关系，做了统一规定。

这被称为ASCII码，一直沿用至今。

ASCII码一共规定了128个字符的编码，比如空格“SPACE”是32（十进制的32，用二进制表示就是00100000），大写的字母A是65（二进制01000001）。

这128个符号（包括32个不能打印出来的控制符号），只占用了一个字节的后面7位，最前面的1位统一规定为0。

2、非ASCII编码英语用128个符号编码就够了，但是用来表示其他语言，128个符号是不够的。

比如，在法语中，字母上方有注音符号，它就无法用ASCII码表示。

于是，一些欧洲国家就决定，利用字节中闲置的最高位编入新的符号。

比如，法语中的é的编码为130（二进制）。

这样一来，这些欧洲国家使用的编码体系，可以表示最多256个符号。

但是，这里又出现了新的问题。

不同的国家有不同的字母，因此，哪怕它们都使用256个符号的编码方式，代表的字母却不一样。

比如，130在法语编码中代表了é，在希伯来语编码中却代表了字母Gimel ()，在俄语编码中又会代表另一个符号。

但是不管怎样，所有这些编码方式中，0—127表示的符号是一样的，不一样的只是128—255的这一段。

至于亚洲国家的文字，使用的符号就更多了，汉字就多达10万左右。

一个字节只能表示256种符号，肯定是不够的，就必须使用多个字节表达一个符号。

比如，简体中文常见的编码方式是GB2312，使用两个字节表示一个汉字，所以理论上最多可以表示256x256=65536个符号。

B331•ApplicationStainless Steel Ball and StemTechnical dataFunctional dataValve Size 1.25" [32]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 400 psi Close-off pressure ∆ps 200 psiFlow characteristic A-port equal percentage, B-port modified for constant common port flow Servicing maintenance-free Flow Pattern 3-way Mixing/Diverting Leakage rate0% for A – AB, <2.0% for B – AB Controllable flow range 75°Cv25 Body pressure rating note 400 psiCv Flow RatingA-port: as stated in chart B-port: 70% of A – AB Cv MaterialsValve body Nickel-plated brass body Stem seal EPDM (lubricated)SeatPTFEPipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuatorsNon-SpringARB(X)Safety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable or constant flow.B331 Flow/Mounting detailsDimensionsDimensional drawingsARB, ARXA B C D E F H1H210.0" [254] 4.0" [101] 6.8" [172] 5.5" [140] 1.7" [44] 2.1" [54]0.8" [20]0.6" [15]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 4.0" [101]8.9" [226]7.6" [194] 3.1" [80] 3.1" [80]ARQB, ARQXA B C D E F H1H29.7" [246] 4.0" [101]7.5" [191] 6.2" [158] 1.7" [44] 2.1" [54] 1.4" [34]0.8" [20]AFRB, AFRXA B C D E F10.6" [269] 4.0" [101] 6.9" [175] 5.7" [146] 2.1" [54] 1.3" [33]AFRB N4, AFRX N4A B C D E F13.0" [330] 4.0" [101]10.5" [267]9.5" [241] 3.7" [95] 3.7" [95]AFRB, AFRXA B C D E F10.6" [269] 4.0" [101] 6.9" [175] 5.7" [146] 2.1" [54] 1.3" [33]ARQB, ARQXA B C D E F H1H29.7" [246] 4.0" [101]7.5" [191] 6.2" [158] 1.7" [44] 2.1" [54] 1.4" [34]0.8" [20]AFRB N4, AFRX N4A B C D E F13.0" [330] 4.0" [101]10.5" [267]9.5" [241] 3.7" [95] 3.7" [95]ARX24-MFT Modulating, Non-Spring Return, 24 V, Multi-Function Technology®Technical dataElectrical data Nominal voltage AC/DC 24 VNominal voltage frequency50/60 HzPower consumption in operation 3.5 WPower consumption in rest position 1.3 WTransformer sizing 6 VA (class 2 power source)Electrical Connection18 GA plenum cable with 1/2" conduit connector,degree of protection NEMA 2 / IP54, 3 ft [1 m] 10 ft[3 m] and 16ft [5 m]Overload Protection electronic thoughout 0...90° rotationFunctional data Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA,1500 Ω for PWM, On/Off and Floating pointOperating range Y variable Start point 0.5...30 VEnd point 2.5...32 VOptions positioning signal variable (VDC, on/off, floating point)Position feedback U 2...10 VPosition feedback U note Max. 0.5 mAPosition feedback U variable VDC variableDirection of motion motor selectable with switch 0/1Manual override external push buttonAngle of rotation90°Angle of rotation note adjustable with mechanical stopRunning Time (Motor)default 150 s, variable 90...150 sRunning time motor variable90...150 sNoise level, motor45 dB(A)Position indication Mechanically, pluggableSafety data Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2 UL Enclosure Type 2Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EUQuality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]Ambient humidity max. 95% r.H., non-condensingServicing maintenance-freeWeight Weight 2.6 lb [1.2 kg]Safety notesARX24-MFT••••••PVC W'Shld for GV w/UGLK (GM)Battery Back Up System for SY(7~10)-110120 to 24 VAC, 40 VA transformer.Cable for ZTH US to actuators w/o diagnostics socket. 50% voltage divider kit (resistors with wires).PC Tool computer programming interface, serial port.AccessoriesGateways Description TypeGateway MP to BACnet MS/TP UK24BACGateway MP to LonWorks UK24LONGateway MP to Modbus RTU UK24MOD Service tools Description TypeConnection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supplyconnectionZK4-GENService Tool, with ZIP-USB function, for parametrisable and communicativeBelimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationINSTALLATION NOTESProvide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and input impedance must be observed.Actuators may also be powered by 24 VDC.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hot connection of the controller. Position feedback cannot be used with a triac sink controller; the actuator internal commonreference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators with plenum cable do not have numbers; use color codes instead.Meets cULus requirements without the need of an electrical ground connection.Warning! Live Electrical Components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electricalsafety precautions when exposed to live electrical components could result in death or serious injury. On/OffFloating PointVDC/mA Control PWM ControlARX24-MFTOverride Control。

GENERAL DATALife ExpectancyMinimum operations Mechanical 5 x 105Electrical 1 x 105at 10 A 250 VAC Res.Operate Time (typical)10 ms at nominal coil voltage Release Time (typical)4 ms at nominal coil voltage (with no coil suppression)Dielectric Strength 5000 Vrms contact to coil(at sea level for 1 min.)3000 Vrms between open contacts3000 Vrms between contact sets Insulation1000 megohms min. at 20°C, 500 VDC,Resistance 50% RHDropoutGreater than 10% of nominal coil voltage Ambient Temperatureat nominal coil voltageOperating -40°C (-40°F) to 70°C (158°F)Storage -40°C (-40°F) to 105°C (221°F)Vibration0.062" (1.5 mm) DA at 10–55 Hz Shock 10 gEnclosure P.B.T. polyesterTerminalsTinned copper alloy, P.C.Max. Solder Temp.270°C (518°F)Max. Solder Time 5 seconds Max. Solvent Temp.80°C (176°F)Max. Immersion Time 30 seconds Weight18 gramsPacking unit in pcs50 per plastic tray / 500 per carton boxCONTACTSArrangement DPST (2 Form A)RatingsResistive load:Max. switched power:240 W or 2500 VA Max. switched current:10 AMax. switched voltage:150 VDC* or 400 VAC* Note: If switching voltage is greater than 30VDC,special precautions must be taken.Please contact the factory.Rated Load UL, CUR10 A at 250 VAC general use 100k cycles [1] [2] [3]TV-3 at 125 VAC [1]TÜV 10 A at 30 VDC resistive, 100k cycles [1] [2] [3]10 A at 250 VAC resistive, 100k cycles [1] [2] [3]Material Silver cadmium oxide [1], silver tin oxide [2]or silver nickel [3]Resistance< 50 milliohms initiallyZET TLERelectronics GmbHFax +49 89 800 97 200 office@ 0 97 800 89 +49 Tel. GermanyPuchheim, D-82178 Junkersstrasse 3, 2005-02-16DPST MINIATURE POWER RELAYFEATURES •Dielectric strength 5000 Vrms •1.5 mm contact gap•Epoxy sealed version available•10 Amp switching — double pole contacts •Isolation spacing greater than 8 mm •UL, CUR file E44211•TÜV file R9659062COILPowerAt Pickup Voltage 450 mW(typical)Max. Continuous 2.0 W at 20°C (68°F) ambient Dissipation Temperature Rise 40°C (83°F) at nominal coil voltage TemperatureMax. 130°C (266°F)NOTES1.All values at 20°C (68°F).2.Relay may pull in with less than “Must Operate” value.3.Specifications subject to change without notice.2005-02-16ZET TLERelectronics GmbHFax +49 89 800 97 200 office@ 0 97 800 89 +49 Tel.GermanyPuchheim, D-82178 Junkersstrasse 3,RELAY ORDERING DATACOIL SPECIFICATIONSORDER NUMBERNominal CoilMust OperateMax. ContinuousCoil ResistanceVDC VDC VDC OhmUnsealedSealed32.254.711.3 ±10%AZ733W–2A–3D AZ733W–2A–3DE 5 3.87.931 ±10%AZ733W–2A–5D AZ733W–2A–5DE 6 4.59.545 ±10%AZ733W–2A–6D AZ733W–2A–6DE 9 6.814.2101 ±10%AZ733W–2A–9D AZ733W–2A–9DE 129.018.9180 ±10%AZ733W–2A–12D AZ733W–2A–12DE 1813.528.4405 ±10%AZ733W–2A–18D AZ733W–2A–18DE 2418.037.9720 ±15%AZ733W–2A–24D AZ733W–2A–24DE 4836.075.92,880 ±15%AZ733W–2A–48D AZ733W–2A–48DE 6045.094.84,500 ±15%AZ733W–2A–60D AZ733W–2A–60DE 11082.5183.316,800 ±15%AZ733W–2A–110DAZ733W–2A–110DE。

Enterprise Development专业品质权威Analysis Report企业发展分析报告安徽斟酌酒业有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:安徽斟酌酒业有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分安徽斟酌酒业有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。

该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。

1.2 企业画像类别内容行业零售业-食品、饮料及烟草制品专门零售资质一般纳税人产品服务空1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.4行政处罚-工商局4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.11产品抽查-工商局4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标信息最多显示100条记录，如需更多信息请到企业大数据平台查询7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。

Ice Machine Parts List for Series B0600 ModelsBR0600A BR0601W BR0690N BD0602A BD0603W BD0692N BY0604A BY0605W BY0694NB0600 CONTROL BOXDESCRIPTION PART NO.1Control Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 2Control Box Cover With Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 76250733Contactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 20065994Run Capacitor (Bristol and Copeland RS86 CIEPFV218)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20101434a Run Capacitor (Copeland RS86 CIEPFV251) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85039334b Run Capacitor (Copeland CS08 KQEPFV255) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85039335Start Capacitor (Bristol)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85031435a Start Capacitor (Copeland RS86 CIEPFV251) (RS86 CIEPFV218). . . . . . . . . . . . . . . . . . . . . . . . . . 85037235b Start Capacitor (Copeland CS08 KQEPFV255) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 85038536Capacitor Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 7Start Relay (Bristol)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20075797a Start Relay (Copeland RS86 CIEPFV251) (RS86 CIEPFV218). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20075397b Start Relay (Copeland CS08 KQEPFV255) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20075598Terminal Board With Harness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20310039Toggle Switch Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230134310Toggle Switch With Wiring Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 203105911Control Board (For use with all voltages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 762800312Bushing - 1.187". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 250001913Bushing - 0.625". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 250016914Bushing - 0.875". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 250140915Screw, #10-24 x 0.50 Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 520216916Screw, #10-24 x 0.50 Hex Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520206917Support For Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430225318Fuse, 7 Amp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251100319Mini-fuse, 0.125 Amp* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 2511169* See Page 9 for 50 Hz Parts12913Side ViewTop View 116161711181315169, 10171615151216546564378101716141615161512161516171111315879, 10† Refer to Cross Reference GuideB0600 EVAPORATOR COMPARTMENTDESCRIPTIONPART NO.1Control Box Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 76250732Distribution Tube Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 76249833Evaporator Assembly, Dice Cube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 76251494Evaporator Assembly, Half Dice Cube. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 76251395Evaporator Assembly, Regular Cube. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 76251596Float Valve Complete Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83691337Float Valve Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 83690698Float Valve Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 83690899Float Valve Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762140310High Pressure Cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 235536911Ice Thickness Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762781312Magnetic Switch w/Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 230148313Nylon Spring Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 565069914Process Valve w/Stem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 837310915Reducing Tee, Rubber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .430057316Tubing, Vinyl 0.25 OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .442029117Tubing, Vinyl 0.625 ID w/Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .442083318Union Connector, White Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .839005319Water Curtain Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 4304643a.Water Curtain Hanger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7627763b.Water Curtain Magnet and Clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762802320Water Flow Clamp, Regular Cube Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .762054321Water Pump, 208-230V 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762601322Water Trough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762748323Water Trough Support Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 430201924Hex Nut, Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 542945925Screw, Nylon, Thumb #8-32 x 0.63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 500001326Screw, Push-in (Up to SN 930662819) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 501227927Screw, #10-24 x 0.50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 520206928Screw, #10-24 x 0.625. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 520205929Screw, #8 x 0.75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 512166930Wing Head Stud (Used after SN 930662819) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .565086331Clip-in Receptacle (Used after SN 930662819). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .565085332Screw to Mount Evaporator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 520218933Water Trough Support Clip Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 762704334Evaporator Gasket/Top Molding Assembly (Not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .762621312921Dump Valve21522333, 4, 591113101713161418121923, 2426, 30, 312525293227286, 7, 82120† Refer to Cross Reference GuideB0600 COMMON PARTSDESCRIPTION PART NO.1Adapter, Water Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17060212Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Longer Available 3Dump Valve, 208-230V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000017684Dump Valve Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62603145Dump Valve Shield (Air only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 70006236Expansion Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 76246437High Pressure Cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 23553698LH Corner Post Weldment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 9Manifold/Strainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831015310Neoprene Bulb Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400720311Neoprene TXV Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400721312NTC Thermistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235116313RH Corner Post Weldment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 14Solenoid Valve 208-230V/50-60 Hz (Danfoss). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 763010115Union, Water Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136096116Vinyl Tube, 0.625 ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 442038317Vinyl Tube, 0.25 OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442029118Water Pump Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 207810319Tube, Copper Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11048120Clamp, Plastic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 565070921Clamp, Worm Drive Hex Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 565052922Clamp, Worm Gear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 565077323Female Wing Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 870609324Nut, Hex Locknut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 547503925Nut, Hex 0.375 - L6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 543002926Rubber Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 850306927Screw, #10-24 x 0.50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 520206928Sleeve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 850394929Washer, Flat 0.312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 557309930Alco Coil Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 24044831293To Condenser In To Compressor Suction Port 91782453213181712151619111014,25, 28, 2921272427202220272327266† Refer to Cross Reference GuideB0600 AIR-COOLEDDESCRIPTION PART NO.1Air Condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88506032Compressor Assembly, 208-230V* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 3Drier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 89302594Fan Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 24129395Fan Blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24161736Fan Cycling Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 20012637Fan Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 8Wire Motor Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34066239Capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .850458310Dump Valve, 208-230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .00000176811Shield For Water Dump Solenoid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 700062312Flatwasher 0.25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 557305913Screw, #10-24 x 0.50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 520206914Screw, #10-24 x 0.625. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 520205915Screw, 1/4 x 1.75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 503358916Well Nut 0.25-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 542955917Hex Nut #8-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 542906918Lockwasher #8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 554459919Flatwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 550426920Lockwasher 0.25 Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 554510921Air Filter (Not shown). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .404003322Air Filter Bracket (Not shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 7626863* See Page 9 for 50 Hz Parts1294Air Flow To Manifold/Strainer SuctionPort DischargePortTo Liquid Line To Low Side Process Tube 110Drain Hose 7298473115201216141419181751113131313131361416122015† Refer to Cross Reference GuideB0600 WATER-COOLEDDESCRIPTION PART NO.1Compressor, 208-230V, 60 Hz 1 Ph* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 2Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83320333Coupling Mounting Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 4Drier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 89302595Female Wing Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 6Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0000088927Receiver Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60005418Water Condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 88653339Water Regulating Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 837206910Flatwasher 0.312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 557309911Lockwasher 0.38 Split. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 554514912Nut - 0.375 Hex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 543002913Screw, #10-24 x 0.50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 5202069*See Page 9 for 50 Hz Parts129512To Liquid LineTo Discharge TeeTo Manifold/StrainerSuctionPortDischarge PortTo Low Side Process Tube 345678910, 11, 12131313† Refer to Cross Reference GuideB0600 REMOTEDESCRIPTION PART NO.1Compressor, 208-230V 60 Hz 1 Ph. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 2Brass Angle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 83731693Brass Angle Valve, Cap Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56507534Coupling - Male 1-1/16-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 83603535Coupling - Male 5/8-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 83603436Drier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 89302797Low Pressure Cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 23554098Magni-check Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83731439Mounting Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .836006310Mounting Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .836005311Panel, Coupling Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 12Pressure Regulator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 836779313Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 14Receiver Mounting Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .630721415Safety Soft Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 16Solenoid Valve, 208-230V/50-60 Hz (Danfoss) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 763008117Solenoid Valve, HPR 208-230V/50-60 Hz (Danfoss). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 763006118Alco Coil Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 240448319Bracket Weldment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 20Mounting Bracket, Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600056121Screw, #10-24 x 0.50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .† 52020691296To Liquid Line To Discharge Tee Suction PortDischarge PortTo Low Side Process Tube1238547616, 18129211920211021211117, 1815142113238† Refer to Cross Reference GuideB0600 PANELSCOMMON PART NO.1Canoe Clip Fastener. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 2Screw, #10-24 x 0.50 Flat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 52020993Screw, #10-24 x 0.50 Hex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 52020694Screw, #8-32 x 1.50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 50266895Cage Nut 8-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 54291096“0” Ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 37181997Extruded Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 92025098Front Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 65804199Back Panel, Air. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 10Back Panel, Remote/Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 11Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404003312Filter Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 7626863FAWN13Air Baffle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 14Front Panel Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 15LH Side Panel, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Longer Available 16RH Side Panel, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 17Side Panel, Water or Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 18Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available STAINLESS STEEL19Air Baffle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600220320Front Panel Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † 762526321LH Side Panel, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 22RH Side Panel, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 23Side Panel, Water or Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available 24Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No Longer Available129712833465392121113, 191014, 2018, 2416, 17, 22, 2315, 17, 21, 23† Refer to Cross Reference Guide。