iksemel-1.2

Klüberplex BEM 41-132, Prod. 020256, en Edition 24.03.2014 [replaces edition 31.07.2014]Benefits for your application–Longer service life due to special wear additives for roller bearings –Less maintenance –Versatile grease due to wide operating temperature range and optimised oil release DescriptionKlüberplex BEM 41-132 is based on synthetic hydrocarbon oil,mineral oil and a special lithium soap. Special additives ensureoptimum oxidation resistance as well as protection against wearand corrosion.Application Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between70 and 110 °C.For rolling bearings with a high degree of sliding friction, e.g.–tapered roller bearings –cylinder roller bearings –spherical roller bearings orfor-life lubricated deep groove ball bearingsandrolling bearings e.g. in–paper-making machines (dry section)–textile machines (dry section)–electric motors –hot air blowers –drying ovens –air separators in the base materials industry –generators in wind power plantsor rolling bearings in vehicle components–clutch bearings –generator bearings –water pump bearings –fluid fan bearings Application notes Klüberplex BEM 41-132 is applied by means of spatula, brush or grease gun. For application via automatic lubricating systems,pumpability should be checked beforehand. Prior to series application we recommend testing the compatibility of the lubricant with the materials in contact.Material safety data sheets Material safety data sheets can be requested via our website . You may also obtain them through your contact person at Klüber Lubrication.Klüberplex BEM 41-132High-temperature and long-term grease for rolling bearingsProduct informationProduct informationKlüberplex BEM 41-132High-temperature and long-term grease for rolling bearingsKlüberplex BEM 41-132, Prod. 020256, enEdition 24.03.2014 [replaces edition 31.07.2014]Klüber Lubrication – your global specialist Innovative tribological solutions are our passion. Through personal contact and consultation, we help our customers to be successful worldwide, in all industries and markets. With our ambitious technical concepts and experienced, competent staff we have been fulfilling increasingly demanding requirements by manufacturing efficient high-performance lubricants for more than 80 years.Klüber Lubrication München SE & Co. KG /Geisenhausenerstraße 7 / 81379 München / Germany /phone +49 89 7876-0 / fax +49 89 7876-333.The data in this document is based on our general experience and knowledge at the time of publication and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant's composition, the intended use and the application method. The technical values of lubricants change depending on the mechanical, dynamical, chemical and thermal loads, time and pressure. These changes may affect the function of a component. We recommend contacting us to discuss your specific application. If possible we will be pleased to provide a sample for testing on request. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this document at any time without notice.Publisher and Copyright: Klüber Lubrication München SE & Co. KG. Reprints, total or in part, are permitted only prior consultation with Klüber LubricationMünchen SE & Co. KG and if source is indicated and voucher copy is forwarded.Product information。

产品介绍玻尿酸水润精华液（补水美白）高效修护保湿玻尿酸水润精华液，采用大小分子玻尿酸，小分子渗透补水，24小时面膜级持久保湿，唤醒水光嫩肌；内含冰川雪域小球藻生长因子及专利抗刺激因子，深层修复肌肤屏障，快速舒缓过敏症状；独家纳米金萃取技术，改善皮下循环系统，加速细胞生长，去黄提亮，肌表焕白。

适合肤质：所有肤质焕颜紧致精华液（祛皱抗衰）独家三项专利研发的焕颜紧致精华液，富含寡肽-1和源自冰川雪域的小球藻生长因子，快速修复激素肌肤，缓解过敏症状，修复过敏细胞；六胜肽生物活性配方，塑造肌肤饱满丰盈，紧致轮廓；独家纳米金萃取技术，快速激活肌肤细胞内胶原蛋白和弹性纤维的再生，提升肌肤的自我修复和更新能力，帮助预防细胞提前衰老，焕颜新肤，逆龄生长。

适合肤质：所有肤质爱露丝纳米微晶导入仪特点：无创无痛透皮渗透高效安全操作便捷创新科技，颠覆传统。

突破传统护肤微针技术，无需手术、没有创伤、不用注射，爱露丝纳米微晶导入仪采用美国进口单晶硅材料制作而成，利用生物芯片与半导体纳米技术，配合导入仪的高频振动，15分钟打开10000+个养分通道，将活性成分输送到皮肤角质层60—70微米以下，是传统护肤吸收的20倍。

组装方法1.打开包装，取出纳米微晶导入仪，然后选取需要护肤效果的原液瓶。

2.左手持导入仪，右手持原液瓶，拧开原液瓶旋转保护盖的一头。

3.将原液瓶手持向上把装有硅胶胶塞的一头，装入纳米微晶导入仪枪头。

操作方法点提法1.爱露丝纳米微晶导入仪安装完毕后。

2. 长按开机电源，开机第一档为低速档，按第二下为中速档，第三下为高速挡。

长按关机。

3. 开机后枪口朝下垂直直接接触皮肤表面，控制好导入仪斜度，以免原液没有均匀流出。

4. 轻轻按压达到一定力度即可触发高频导入电机，开启养分输入通道.5. 通过快速、密集、轻柔的上下一点一提作用于操作部位，快速呈现美肤效果6. 护理完之后无需清洗，再使用一片修复面膜，20分钟以后再清洗面部，对皮肤起到一个更好的吸收和修复效果。

尖晶石微粉
立赛LISAM™
我们致力于为您提供最好的产品和服务 地址:浙江省绍兴市上虞区杭州湾工业园区 电话:86-575-82112629
4 包装、
贮存以及保质期 包装采用根据客户要求的方式（25kg 纸
塑编袋、1吨吨袋等），以方便运输、保存和使用。

为了将产品保存更长时间，达到最佳使用效果，我们建议您尽量不要更换原包装，并在贮存期保护好外包装，以便减小外部潮湿空气对产品质量和储存期的影响。

电炉小炉盖
VOD 炉炉盖
尖晶石微粉
立赛LISAM™
[2]：物理指标中筛分≤45um ，使用325目筛网测试水洗通过率；
[3]：物理指标中粒度分布D50/D90采用Mastersizer 3000激光粒度测试仪进行检测。

以上典型值为公司实际生产平均值（以公司检测标准为准）。

公司有权根据内部技术进步发展更改生产数据
我们致力于为您提供最好的产品和服务 地址:浙江省绍兴市上虞区杭州湾工业园区 电话:86-575-82112629
我们致力于为您提供最好的产品和服务 地址:浙江省绍兴市上虞区杭州湾工业园区 电话:86-575-82112629
7
物流运输
8
联系方式
浙江自立新材料股份有限公司
地址：浙江省绍兴市上虞区百官街道百谢路电话:+86-0575-******** 传真:+86-0575-******** Email:*********************网址：
Zili USA LLC
地址: 100 Ali Street, Pittsburgh, PA,15215,USA 电话: +001-412-418-6676 Email:****************。

某香水广告策划案某香水广告策划案一、前言“闻香识女人”，没有香味的女人，如同没有香味的花一样，是朵塑料花?。

可见，香氛与女人有着如此密不可分的关联，不同层次，不同性情，不同爱好的人们。

由于各自同异的性格而偏爱某种特殊香味的香氛。

于是，女人在选用香氛增添自己魅力的同时，也正在向人们展示您的热情与情趣。

在经济高速发展的今天，我们越来越感觉到香水对女人的重要性。

二、市场概况法国着名化妆品兰蔻一向是以高贵的品质和优良的品质着称。

提到兰蔻人们总是非常的信任其产品。

产品品牌?包装?规格（ml)?价格(元）克里司汀?迪奥（Christian?Dior）?首个时装系列"The?New?Look"为女性形象起革命，显露女性优美纤腰、香肩和美腿的时装款式，?50?302香奈儿(Chanel)?长方体附以利落线条的香水瓶，状如宝石切割般形态的瓶盖，N O．5的黑色字眼呈现于白底上。

?50?476兰蔻(Lancome)?瓶身是一个充满光芒的玻璃球体?50?435雅诗兰黛(Estee?Lauder）?其瓶体造型简洁大方，?50?386产品品牌?广告语?费用（万元）克里司汀?迪奥（Christian?Dior）?这世界不再黑白两色，It’s?gold?562.59 香奈儿(Chanel)?每一个活着的女人都需要香奈儿五号?124.76兰蔻(Lancome)?我的兰蔻，我的花样年华?6373.35雅诗兰黛(Estee?Lauder）?象水一样的香水?154.08三、消费者研究一）.1.一般应用化妆场合：1）参加正式宴会2）平时上班3）外出逛街２.使用品牌状况：1）未婚女姓偏爱花香型香水系列2）各种品牌，各具功能３.购买状况：1）用完再买2）没用完，看到喜欢就买3）亲友赠送４.购买地点及方式未婚1）百货专柜2）大型商场或卖场3）国外带回已婚1）百货专柜或百货行2）问朋友而去购买（包括厂牌，地点）3）国外带回５.产品特性之探讨1）外观2）可以更换3）携带方便4）保养功能5）高级6）色彩7）精致６.全球化妆品市场调查报告2002年上半年期刊广告投放前10位品牌?单位：万元? 排名?品牌?2002年1-6月?2001年1-6月?同比增长率1?欧莱雅?2047.38?1299.69?57.53%2?兰蔻?1731.03?851.35?103.33%3?SAMSUNG?1288.65?733.51?75.68%4?雅芳?1237.48?296.24?317.73%5?SK-II?1155.18?471.02?145.25%6?DELL?1147.18?551.17?108.13%7?INTEL?902.53?197.96?355.92%8?美宝莲?856.14?865.56?-1.09%9?CANON?764.04?613.76?24.49%10?香奈儿?753.54?342.68?119.90%二.）本公司产品：“珍宝”是第一款非佩提让本人研制的兰蔻香水，1990年推出，一直是最畅销的香水之一。

Firmware for ioLogik E1200 Series (E1210) Release NotesSupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Fixed inaccurate counter value when using Modbus to start a pulse (E1210/E1212/E1213).• Fixed opposite on/off pulse width display on web console (E1211/E1212/E1214).• Fixed that the offset scaling value will reset after changing the Alias name (E1260).• Fixed self-rebooting when entering URL in the browser for the configuration file.• Fixed EDS file import connection error.• Fixed failure when using save counter on power failure and reset counter at the same time (E1210/E1212/E1213).• Fixed inaccurate counter value when using high frequency (E1210/E1212/E1213).• Fixed that the trap community name is not included in the export file.• Fixed that EtherNet/IP cannot use the “Set Attribute Single” service.• Added an enable RESTful API setting in the configuration file.EnhancementsN/AioLogik E1210, ioLogik E1210-T• EtherNet/IP registration on Moxa’s licensing website is no longer required.• Added case insensitive content-length for RESTful API.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Added SNMP Trap Community Setting to the web console.• Added a note on the password settings page that passwords are limited to 16 characters.• Fixed DHCP lease time did not ask for extension when half of the lease time elapsed.• Closed IP forwarding function (Port 0).• Closed UDP Port 161 when SNMP agent is disabled.• Fixed RESTful API header case-sensitive issue.• Fixed invalid token issue on login page when using Firefox.EnhancementsN/AioLogik E1210-T, ioLogik E1210• Added OPTIONS method for RESTful API.• Added quick access URI for RESTful API.New FeaturesN/A• This version of the firmware only works with ioSearch v2.0 or later versions.• To prevent system failure, only update the next or the previous released firmware version to prevent from system failure.Supported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Fixed file transfer problems when using the Chrome browser (e.g., firmware update, configuration import or export).EnhancementsN/AioLogik E1210, ioLogik E1210-T• Added the EtherNet/IP protocol.• Added RESTful API.• Added new registers for the Modbus/TCP protocol.• Added new OIDs for the SNMP protocol.• Modbus, EtherNet/IP, and RESTful services can be disabled (enabled by default).• Added sending heartbeat to port 9500 of MX-AOPC UA Server after the heartbeat function is enabled.• Increased password length from 8 to 16 characters.• Added a function to check special characters to prevent Cross-Site Scripting.• Passwords are now sent using the POST method instead of the GET method.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsN/AioLogik E1210, ioLogik E1210-T• Improved protocol efficiency for the ioLogik 2500 Series.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Unable to disable the P2P heartbeat interval.• When the P2P client heartbeat is larger than 256 the time interval is incorrect.EnhancementsN/AioLogik E1210, ioLogik E1210-T• Supports ioLogik 2500 expansion mode.• Supports setting an initial value for a counter.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• The counter storage is deleted when the power fails.EnhancementsN/AioLogik E1210-T, ioLogik E1210• Supports SNMP protocol.• Added P2P heartbeat function.New FeaturesN/A• This version of firmware only works with ioSearch v1.5 or later versions.• Use the web console when upgrading the firmware from v1.0 to v1.10.Supported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Ensured that the system works properly after unstable power conditions.N/AEnhancementsN/AioLogik E1210, ioLogik E1210-TN/ANew FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Improved firmware upgrading speed.• Removed Modbus/TCP ID checking mechanism.N/AEnhancementsN/AioLogik E1210, ioLogik E1210-T• Added "Locating I/O" function in General Settings.• Added Modbus address function code=0x08 for “ECHO” function.• Counter overflow status displayed in Channel Settings can be cleared manually.New FeaturesN/A• This version of the firmware only works with ioSearch v1.5 or later versions.• Use the web console when upgrading the firmware from v1.0 to v1.9.。

Model 393B12Seismic, high sensitivity, ceramic shear ICP® accel., 10 V/g, 0.15 to 1k Hz,Installation and Operating ManualFor assistance with the operation of this product,contact PCB Piezotronics, Inc.Toll-free: 800-828-884024-hour SensorLine: 716-684-0001Fax: 716-684-0987E-mail:************Web: The information contained in this document supersedes all similar information that may be found elsewhere in this manual.Total Customer Satisfaction – PCB Piezotronics guarantees Total Customer Satisfaction. If, at any time, for any reason, you are not completely satisfied with any PCB product, PCB will repair, replace, or exchange it at no charge. You may also choose to have your purchase price refunded in lieu of the repair, replacement, or exchange of the product. Service – Due to the sophisticated natureof the sensors and associated instrumentation provided by PCB Piezotronics, user servicing or repair is not recommended and, if attempted, may void the factory warranty. Routine maintenance, such as the cleaning of electrical connectors, housings, and mounting surfaces with solutions and techniques that will not harm the physical material of construction, is acceptable. Caution should be observed to insure that liquids are not permitted to migrate into devices that are not hermetically sealed. Such devices should only be wiped with a dampened cloth and never submerged or have liquids poured upon them.Repair – In the event that equipment becomes damaged or ceases to operate, arrangements should be made to return the equipment to PCB Piezotronics for repair. User servicing or repair is not recommended and, if attempted, may void the factory warranty.Calibration – Routine calibration of sensors and associated instrumentation is recommended as this helps build confidence in measurement accuracy and acquired data. Equipment calibration cycles are typically established by the users own quality regimen. When in doubt about a calibration cycle, a good “rule of thumb” is to recalibrate on an annual basis. It is also good practice to recalibrate after exposure to any severe temperature extreme, shock, load, or other environmental influence, or prior to any critical test.PCB Piezotronics maintains an ISO-9001 certified metrology laboratory and offers calibration services, which are accredited by A2LA to ISO/IEC 17025, with full traceablility to N.I.S.T. In addition to the normally supplied calibration, special testing is also available, such as: sensitivity at elevated or cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For information on standard recalibration services or special testing, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning Equipment – Following these procedures will insure that your returned materials are handled in the most expedient manner. Before returning any equipment to PCB Piezotronics, contact your local distributor, sales representative, or factory customer service representative to obtain a Return Warranty, Service, Repair, andReturn Policies and InstructionsMaterials Authorization (RMA) Number. This RMA number should be clearly marked on the outside of all package(s) and on the packing list(s) accompanying the shipment. A detailed account of the nature of the problem(s) being experienced with the equipment should also be included inside the package(s) containing any returned materials.A Purchase Order, included with the returned materials, will expedite the turn-around of serviced equipment. It is recommended to include authorizationon the Purchase Order for PCB to proceed with any repairs, as long as theydo not exceed 50% of the replacement cost of the returned item(s). PCB will provide a price quotation or replacement recommendation for any item whose repair costs would exceed 50% of replacement cost, or any item that is not economically feasible to repair. For routine calibration services, the Purchase Order should include authorization to proceed and return at current pricing, which can be obtained from a factory customer service representative.Warranty – All equipment and repair services provided by PCB Piezotronics, Inc. are covered by a limited warranty against defective material and workmanship for a period of one year from date of original purchase. Contact PCB for a complete statement of our warranty. Expendable items, such as batteries and mounting hardware, are not covered by warranty. Mechanical damage to equipment due to improper use is not covered by warranty. Electronic circuitry failure caused by the introduction of unregulated or improper excitation power or electrostatic discharge is not covered by warranty. Contact Information – International customers should direct all inquiries to their local distributor or sales office. A complete list of distributors and offices can be found at . Customers within the United States may contact their local sales representative ora factory customer service representative. A complete list of sales representatives can be found at . Toll-free telephone numbers for a factory customer service representative, in the division responsible for this product, can be found on the title page at the front of this manual. Our ship to address and general contact numbers are:PCB Piezotronics, Inc.3425 Walden Ave.Depew, NY 14043 USAToll-free: (800) 828-884024-hour SensorLine SM: (716) 684-0001 Website: E-mail:************DOCUMENT NUMBER: 21354 DOCUMENT REVISION: B ECN: 17900。

（A包）全自动酶免工作站性能参数1、基本要求1.1原装进口；1.2全自动完成酶免试验的一般性实验步骤，包括加样、稀释、孵育、洗板、读数、出报告等，适用于所有ELISA方法的试验项目，测试程序与试剂完全开放，实验人员可任意编程，可单独进行上述任意试验步骤或某几个试验步骤的组合；1.3全自动完成血凝和血凝抑制实验的加样过程，包括加样、倍比稀释、加试剂等步骤；1.4连续批量进样、连续进板，立体交通式连续运行，不受批次限制；1.5能同时在线检测项目≥20个，同一板上可同时运行≥12个项目，可实现批量运行、无人值守；2、主机平台2.1 *工作平台至少可容纳28块微孔板，并至少具有9块加样板位；2.2 *机械臂：含有至少2独立个机械臂，1个8通道移液机械臂和1个移板机械臂，双机械臂相互独立，且可以同时运行；2.3主机平台带工作状态指示灯，具有声光双重报警系统；2.4具有安全防护面板，配备门锁，可防止非法进入工作台面，面板带有暂停按钮，可在任一时间进行暂停，处理异常事件；2.5洗板机、酶标仪等功能模块均由同一厂家生产以保证实现数据无缝整合；2.6控温孵育位应≥12个；2.7常温孵育位应≥24个；3、8通道移液机械臂3.1具有8个独立的移液通道，基于管泵的液体置换或者气体加样原理，以稳定的系统液作为媒介，保证加样的稳定、准确、快速；配备可清洗钢针模块，既可使用清洗钢针也可使用一次性加样针进行加样，实验人员可自行进行切换或更换；3.2加样精度：CV≤3.5%(10μl时)；CV≤0.75%(100μl时)；3.3每根钢针均具备独立的电容式液面感应功能，可鉴别凝块、气泡等，可实时报警并给出相应处理提示；3.4加样针清洗方式：活性洗涤工作站,内外壁分开清洗，可编程控制洗涤参数，交叉污染率≤1ppm。

4、移板机械臂4.1具有独立移板机械臂，机械手臂可进行水平方向的旋转和延展，旋转角度≥270°，可操作层架式立体储板架，对任意位置的板架进行任意取放；4.2可夹取微孔板、深孔板、试剂架、一次性枪头盒等各种物品，不受样品高度限制，最大承重不少于400g；4.3具有抓板传感器，可对抓板失败、掉板及错误放板等情况进行自动报警。

OverviewA – PanelB – Standard bottleC – Grab sample bottleD – Solenoid valve for zero calibrationE – Photometer moduleF – 6-way valveG – Flow regulating valve H – Flow cell I – Flow meter J – Sample inlet K – Sample outlet L – Reagent 4 M – Reagent 3 N – Reagent 2 O – Reagent 1P – Peristaltic pump Q – TransmitterKeysA – to exit a menu or command (rejecting any changes) to moveback to the previous menu levelB – to move DOWN in a menu list and to decrease digitsC – to move UP in a menu list and to increase digitsD – to open a selected sub-menu to accept an entryDisplayA – INIT Warming up the reaction chamberRUN normal operationHOLD input closed or cal delay: Instrument on hold (shows status of signal outputs).OFF input closed: control/limit is interrupted (shows status of signal outputs).GRAB A grab sample measurement is in progress B – ERROR Error Fatal ErrorC – Reagent low, indicates remaining reagents in % (17% = 340 ml)D – Keys locked, transmitter control via ProfibusE – TimeF – Process value with time stampG – Reaction chamber temperature Target: 45°C H – Sample flow - 5 – 10 l/h I – Relay statusRelay status, symbolsupper/lower limit not yet reached upper/lower limit reached control upw./downw. no actioncontrol upw./downw. active, dark bar indicates control intensity motor valve closedmotor valve: open, dark bar indicates approx. positiontimertimer: timing active (hand rotating)Overview - continuedDisplay when operating with two or more sample streamsIcon descriptionF – Process values with time stampSi1 –Si6: Sample streams 1 to 6, according to the number of available channels.Up to 3 process values can be displayed on one screen.Toggle screens with the [] key.Active measurement Position of valve ~ No sample flown Measurement not validx Sample stream inactive (only visible if a Sample Sequencer isconnected to the AMI Silitrace and measuring mode <internal> is selected).It is common for “n” to display on occasions at the right -hand side until the analyser has “validated” the measurement.MaintenanceDaily – Check flow on all channels. Check timestamp of last measurement. – Check reagent levels Monthly – Replace reagentsEvery 2 – 3 months – Check standard solution and exchange if necessary. Semiannual – Exchange pump tubes. Perform a calibration after exchanging the pump tubes. When required – E020, FOME dirty: Clean the photometer with 5% NH3 solution.CAUTION - Pollution of reagents possible.If the occlusion frames of the peristaltic pump are opened during operation, already mixed reagents will flow back into the reagent canisters and pollute the reagents. Refer to the Maintenance section of the manual for more information.ZeroBy default, the system is programmed to carry out an automatic zero at 12:30am every day. To check the results of the zeroing process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> ZERO HISTORY. The value should be close to 2.2VTo manually perform a zero, select MAINTENANCE -> ZEROVerificationBy default, the system is programmed to carry out an automatic verification at 06:00am every Monday. To check the results of the verification process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> VER. HISTORY. The value should be close to the value of the standard being used (eg 100ppb) To manually perform a zero, select MAINTENANCE -> VERIFICATIONCalibrationTo check the results of the calibration process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> CAL.HISTORY.To manually perform a zero, select MAINTENANCE -> CALIBRATIONA calibration should be performed when the peristaltic pump tubes are replacedReagent set for AMI SillitraceContents♦ Reagent 1: bags 1a and 1b for canister 1 ammonium molybdate and sodium hydroxyde ♦ Reagent 2: bottle 2 for canister 2 sulphuric acid 25% ♦ Reagent 3: bag 3 for canister 3 oxalic acid dihydrate♦ Reagent 4: bag 4a and bottle 4b for canister 4 ammonium ferrous sulfate hexahydrate sulphuric acid 25%containing detergent ♦ Reagent filters (12x)CAUTIONChemical exposure hazard♦ Observe the necessary security measures when manipulating dangerous chemicals. ♦ Read the Material Safety Data Sheets carefully!Personal protective equipment:Reagent 3:H302: Harmful if swallowed.H312: Harmful in contact with skin. H315: Causes skin irritation.H318: Causes serious eye damage. H373: May cause damage to organs through prolonged or repeated exposure.Reagent 4a:H315: Causes skin irritationH319: Causes serious eye irritation H335: May cause respiratory irritationReagent 1b, reagent 2, reagent 4b:H314: Causes severe skin burns and eye damagePreparationNote: Please consider the following points when preparing new reagents:•Reagent 3, oxalic acid dissolves very slowly, we therefore recommend to prepare reagent 3 first.•Reagent 1, add sodium hydroxide (reagent 1b) first.•Before refilling rinse all containers well with demineralized water.Reagent 3:1Fill canister 3 with approx. 1.5 litres of ultrapure water.2Add reagent 3 to canister 3.3Close the canister with a screw cover and shake well.4Fill up the canister to the 2 L mark, close it and shake again.Reagent 1:1Fill canister 1 with approx. 1.5 litres of ultrapure water.2First add the content of bag 1b (sodium hydroxyde).3Close the canister with a screw cover and shake well until the sodium hydroxyde is dissolved.4Add the content of bag 1a.5Fill up the canister to the 2 L mark, close it and shake again.Reagent 2:1Fill canister 2 with approx. 1.5 litres of ultrapure water.2Add the bottle 2 (sulfuric acid 25%).3Close the canister with a screw cover and shake well.4Fill up the canister to the 2 L mark, close it and shake again.Reagent 4:1Fill canister 4 with approx. 1.5 litres of ultrapure water.2First add bag 4a.3Close the canister with a screw cover and shake well.4Add bottle 4b. Rinse the residual foam in bottle 4b with ultrapure water and fill it into the canister until the2 L mark is reached.5Close the canister with a screw cover and shake well. Some foam forms on thesurface.All canisters:Always replace the reagent filters (included with each reagent set) when preparing new reagents. Insert suction lances into the containers. Make sure that the numbers on the suction lances correspond to the numbers on the containers.Error Messages To view active error messages, press ENTER to open menu system, select MESSAGES -> PENDING ERRORS. Consult the manual for a full list of error messages.HINT: With any Swan system, press ENTER 3 times from the home screen to bring up the PENDING ERRORS list.Reorder codes。

CS-2100i/2000i根据SYSMEX在血栓与止血领域多年积累的经验，为全面满足各类实验室的需求率先开发CS-2100i/2000i。

四种方法学：凝固法/发色底物法/免疫比浊法/聚集法unique!多波长高精度光学检测：5种波长检测提供可靠数据新型智能监测：特有的HIL check 功能排除溶血/黄疸/脂血干扰更多新检测项目的选择：FXIII，vWF:Rco等更可靠的实验室质量保证：SNCS实时在线质控全面满足血栓与止血检测需求！CA-7000以全球最快的分析速度提供全面和高精准的止凝血项目检测结果，仪器集中了凝固法，发色底物法和免疫法于一体，设计高度人性化和智能化，操作简便，成为大规模实验室的首选。

● 多参数测试，500测试/小时高速分析能力● 操作简便，灵活对待各种需求● 优秀的试剂管理系统（SRS）● 安全、实用的系统设计● 大容量的数据管理能力，完整的质控系统CA-1500汇集了当今血栓/止血分析仪最新的各种先进功能于一身，是市场上少见的性能/价格比极高的一台仪器，是大型教学医院，综合医院实验室的首选。

它具有快速处理能力，最快180测试/小时，集多种检测功能于一身：凝固法、发色底物法、免疫法。

具有全能随机组合能力，两种方法测定纤维蛋白质，适合常规大量和急诊使用。

● 拥有高速处理能力、随机测试功能和自动再检查功能● 三种分析方式，包括多规则监视的广泛质控文件和平行线生物分析功能● 卓越的性能可以灵活适应实验室的多样化需求CA-500系列CA-500系列包含了六款机型，设计新颖、符合经济原则，是各中小型实验室开展血栓/止血实验的最佳选择，也是半自动升级到全自动的理想机型。

小型台式仪实用可靠,具备三种检测系统即凝固法、发色底物法、免疫法的自由组合用户可根据需要选择相应机型。

CA-50设计上完全沿用了全自动CA系列的检测原理，锁定人为误差因素的设计确保它有别于其他半自动血凝仪，达到全自动仪器的准确性与重复性效果，四通道即可批量检测又可单独检测，内置质控文件，适用于小标本量实验室使用。

I P D I单体德国科思创原名拜耳德国德固赛 SANY标准化小组 #QS8QHH-HHGX8Q8-GNHHJ8-HHMHGN#IPDI单体介绍1，物料及制造商资料商品名称：IPDI（异佛尔酮二异氰酸酯）制造商：德国科思创（原拜耳）；德国德固赛主要应用：用来合成主要用于涂料、胶粘剂、密封剂及弹性体的树脂或固化剂。

可致电以上电话以咨询更多更详细的用途，我们将由专门的产品应用部门为您解答。

2，产品成分资料详见该资料第16条。

3.危险性概述①吸入中毒。

②对眼睛、呼吸系统、皮肤有刺激作用。

③吸入或与皮肤接触会产生过敏。

④对水生生物体有毒性，会造成对水体环境的长期负面影响。

4.急救措施①一般建议：若沾染衣物，应立即除去，若有不适，延医治疗；②吸入：立即呼吸新鲜空气，若有必要延医治疗；③皮肤接触：立即用大量的清水或碱液清洗，如有必要延医治疗；④溅入眼睛：立即用大量的清水冲洗15分钟，并延医治疗；⑤摄食：立即延医治疗。

5，消防措施常用灭火材料：二氧化碳，干粉，泡沫，水；发生火警：Ⅰ用水冷却降温容器；Ⅱ会产生氮氧化合物、异氰酸酯蒸汽；Ⅲ火灾场所会有有毒气体放出。

火警特殊保护装置：应佩戴专门呼吸器械。

6，意外泄漏处理②身体防护：佩戴身体保护装置，确保通风；②环境防护：切勿排放至自然界；③清洗方法：用无活性的材料（如，沙土、硅胶、锯屑等）浸泡，使容器充满、密封，并用水保护。

7，产品管理及贮存㈠管理安全管理建议：小心打开容器，避免接触皮肤、溅入眼睛。

在工作地方确保通风或排气畅通。

㈡贮存容器及贮存地点要求：容器应密闭，存放在干燥、阴凉、通风处。

遵守仓库对危险、有毒化学品的规章制度。

8，泄漏处置及个人保护措施㈡遵循工作场所作业规章㈡施工要求使用时尽量保持设备密封，或使用吸入式设备。

㈢个人防护要求②呼吸系统保护：若发生泄漏或超出阀极限值应立即佩戴呼吸过滤装置；②双手保护：手套材料：氟化橡胶（FPM）；材料厚度：0.4mm；突变时间：>480min；处理方法：来源――GloSaDa（手套安全资料）。

Complete infrared spectroscopy system for routine analytical needsThermo Scientific Nicolet iS10 FTIR SpectrometerLubricants Pharmaceuticals Rubbers/PolymersChemicalsTextiles LoadEnsureIdentifyComply MeasureVerifyYour process, our answer23PackagingBiofuels/Fuels Inks/Pigments/PaintsCement CosmeticsOwning a Thermo Scientific ™ Nicolet ™ iS10 FTIR spectrometer means you are up and ready as soon as your instrument is turned on. You do not need to be a spectroscopy expert to get good data from your Nicolet iS10 spectrometer— the expertise is already built into the instrument.Materials identificationChallenges walk through your lab door every day. Handling last-minute demands from manufacturing,quality control and product development—troubleshooting is your daily “routine.” Your answers determine not only your customers’ satisfaction, but also your company’s image and profitability. Performance, ease-of-use and reliability are of paramount importance. The Nicolet iS10 spectrometer goes the distance with you—risk free.Materials verificationValidation, data integrity and push-button operation are important requirements, but no longer sufficient in today’s fast-paced, continuous-improvement business environment. Your job requires you to manage cost of ownership of your equipment, enhance productivity, save time, and ensure that human errors are at a minimum. Youdemand unambiguous answers. The Nicolet iS10 FTIR spectrometer, with award-winning Thermo Scientific ™ OMNIC ™ software, creates the most effective tool to achieve your objectives without compromise.These are only a few of the materials that can be monitored for consistent quality using the Nicolet iS10 FTIR spectrometer .Sample information loading andpreparation• M inimize user interaction by loading sample information through bar codes• S tandardize sample preparation and quality of results by using the Thermo Scientific ™ Smart iTX ™ ATR sampling accessory• A utomate method selection for error-free operationSystem is always qualified• S ave valuable time and optimize laboratory throughput by running system qualification overnight, every night with System Performance Verification (SPV)• Qualify the spectrometer and the accessory • S ystem suitability testing complements performance verification• C onstant system monitoringRunning the Nicolet iS10 FTIRspectrometer means no typing sample numbers, no printing SOPs and nomanual selection of methods. You don’t even need to touch the computer.What you get is:• Speed • Consistency • Security • Confidence4QC analysis—answers out Sample verification• V erify raw materials, intermediates and finished productsfor consistency, purity and concentration• B e absolutely confident in your pass/fail results,regardless of your sample, thanks to the new and uniquecompare tools in the Thermo Scientific™ QCheck™ feature• Q uantify your compounds with classic and chemometrictools in Thermo Scientific™ TQ Analyst™ software Comprehensive reports, quick and easy• S ystem validation status and date• Sampling accessory validation status and date• M ethod verification (suitability) status and date• S ample verification status (pass or fail)• User ID and digital signature (where applicable)• G enerated and digitally stored for convenient reviewthroughout your organizationClear and simple answers for smoothquality control and assurance.Universal sampling—realityAttenuated Total Reflectance (ATR) is a powerful sampling technique that virtually eliminates sample preparation. The Thermo Scientific Smart iTX ATR sampling accessory for the Nicolet iS10 spectrometer offers outstanding performance and universal sampling.• Multiple crystal options make it possible to sample virtually any liquid or solid • Automatic recognition, collection parameters, spectral quality check • Factory-calibrated pressure tower ensures spectral uniformity • Easy to clean and quickly load your next sample• Maximum durability; withstand hard and harsh samples with diamond ATR • OMNIC ATR correction allows spectral search without dedicated ATR libraries • Q ualification available for diamond crystalsMore than 60% of FTIR users get their resultsby using a single reflection ATR. The popular Smart iTX sampling accessory deliversexceptional energy throughput, which allows you to acquire high-quality spectra in seconds. The interchangeable crystals meet your needs for flexibility, ease of cleaning and reproducibility of data.characterized with the Smart iTX universal sampling module by using the germanium crystal.Smart iTX Universal ATR Sampling accessory reference chartCRYSTAL TYPEMATERIAL TO BE SAMPLEDDiamondZnSeGermaniumSoft solids, powders Best Best Good Rigid samples Best Weak Weak Harsh chemicals Best Weak Good Coatings on metal Good Weak Weak Liquid samples, gels Best Good Good Carbon black filled samplesWeakMediumBest7Productivity and efficiencyMaximize productivity• C onfigure the spectrometer for routine daily use with the main sample compartment • E liminate accessory changeover delays and complete sample analysis fasterEnsure quality results• O ptimized performance of dedicated accessorieswith the flexibility to meet changing needs quicklyEasily comply• I ndependently validate each module with our Thermo Scientific ™ ValPro ™ system qualification packageDouble your lab’s throughput without doubling your budget. The Thermo Scientific ™ Nicolet ™ iZ10 adds a second sampling module while sharing your Nicolet iS10 spectrometer’s analytical engine.Simplify samplingThe Thermo Scientific Near-IRIntegrating Sphere samples directly through glass, allowing you to rapidly analyze materials for both qualitative and quantitative e the Near-IR Integrating Sphere to:• E liminate sample preparation • S peed up analysis • A nalyze bulk samples• G et pass/fail or quantitative resultsThe Nicolet iZ10 module doubles your sampling capabilities with one spectrometer.Analytical support—problem in, answer outWhen defects occur in your manufacturing process, when suspected counterfeit goods threaten your brand, or when your quality control laboratory rejects a product—your analytical services day has begun.Getting to the core of these questions requires aninvestment in spectral libraries, ability to identify mixtures and a justification of your results—just a good quality infrared spectrum is not enough!Meet Thermo Scientific ™OMNIC ™Specta ™software , a unique combination of spectral identification tools, Tough questions...Q Why was the material rejected?Q Why did the failure occur?Q I s the customer correct, or did they not use the product properly?Q What is the root cause?Q What possible actions can we take?…Require definitive answersA O MNIC Specta improves your lab’s problem-solving skills—minimizing the cost of external contract lab services.A O MNIC Specta protects and improves your customer satisfaction.A O MNIC Specta reduces inconsistent product quality and product recalls.A I deal for the analytical services lab, OMNIC Specta also empowers QC laboratories wanting to minimize costs of external contract lab-services.Get the highest confidence from infrared spectroscopy materials OMNIC Spectra software provides innovative identification and interpretation tools and a unique expert knowledge base. Itconverts all of the spectral data on your hard disk into an always-ready database and includes a standard collection of thousands of spectra enabling you to efficiently and effectively identify pure materials and mixtures.OMNIC Specta software can identify multiple compounds inmixtures, simultaneously with a click of the mouse. This example shows a polymer material made of ABS, and a brominated flame retardant as the second component.9Analytical support—see, study, reportQuantitative method development• P rovide better tools to QC laboratories to monitor finished products quality• M easure the concentration of your ingredients after mixing or before product shipment• V erify product specifications for quality assurance OMNIC software includes TQ Analyst quantitative analysisfor multiple compounds in simple mixtures. For more complex mixtures and diluted ingredients, chemometric tools such as PLS, PCA and PCR are optionally available.Contamination and failure analysis by • I dentify composition of small particles by OMNIC Specta • F ind the possible cause/source of the failureThe Nicolet iS10 FTIR spectrometer can drive the research-grade Thermo Scientific ™ Continuμm ™ FTIR microscope, the far simpler, manual Thermo Scientific ™ Nicolet iN5 FTIR microscope or accompany the integrated Thermo Scientific ™ Nicolet iN10 FTIR microscope. Define your needs—imaging, automation, point-and-shoot—and you’ll find a solution with Thermo Fisher Scientific.Materials analysis by TGA-IR• L earn more about materials by linking infrared to thermal analysis • I dentify species evolved during thermal decomposition • E lucidate composition of mixtures, copolymers and blendsEnsure the quality of your products and identify microscopic contaminants.OMNIC Series software, with unique Mercury TGAroutine and 3-D displays, allows you to quickly and efficiently extract useful information from TGA-IR and other time-based experiments.Don’t take risks. Empoweryour laboratory with a reliable,high-performing and warrantyprotected FTIR.Every Nicolet iS10 FTIR spectrometerincludes software and tools for ASTMmethod FTIR validation protocol withcapability for comprehensive overnightfully-automated testing, NIST traceableand serialized standard testing, andNIST traceable standard mounted onserialized wheel. ValPro advancedvalidation package is optionallyavailable for more demandingregulated environments andpharmaceutical industry.Quality-driven businesses, pharmaceutical manufacturers and other regulatedlaboratories must have absolute confidence in the answers they provide—withsupporting documentation. The Nicolet iS10 FTIR spectrometer is the perfect partnerfor any regulated and quality driven environment. The standard qualification packageincludes software, hardware and documentation based on industry-standardvalidation methods, traceable standards and automated overnight qualification.System Performance Verification (standard)• F ully automated ASTM E-1421 methodfor FTIR spectrometer testing, includesreport printout for reference purposes• F ully automated validation wheel with1.5-MIL (38-micron) serialized NISTtraceable polystyrene film, and NG-11Schott glass• S PV software for spectrometer, sampling accessory,method performance verification and system suitabilitytesting• Overnight system verification, user programmableValPro System Qualification (optional)• F ully automated ASTM methodsfor FTIR spectrometers testing,includes printed copy for referencepurposes• E uropean and Japanesepharmacopoeia methods• A STM, EP and JP samplingaccessory validation• F ully automated validation wheel with 1.5-MIL(38-micron) serialized NIST traceable polystyrene film,and NG-11 Schott glass• V alPro software for spectrometer, sampling module andmethod performance verification• D esign Qualification documentation (DQ)• O Q, PQ protocols and documentation• I nstallation Qualification (IQ) also availableDigital signature and electronic datasecurity (optional)• C omplete 21 CFR Part 11 compliance tools• D igital signatures for the most secure data• A udit trails for data and system use• S erver-based security administrator10Quality, performance and supportSealed and desiccated optics lowers maintenance costsStandard KBr/BaF 2 anti-hygroscopic coating, protective windows• U ser rechargeable desiccant canister and humidity inspection window• H igh-sealing gaskets to protect system from chemical vapors• S tandard integrated multi-level positive pressure purge circuitProven technology for low cost, state-of-the-art operation• D iamond-turned mirrors and pinned-in-place optics provide excellent wavelength accuracy with no need for spectral correction by software• D ynamic alignment provides superior performance and scan velocitiesR and halogen sources accessible from the sample Built to last and backed by the Thermo Fisher Scientific global customer service, the Nicolet iS10 spectrometer is designed to be the workhorse of your laboratory.Automatic atmosphericsuppression removes water and carbon dioxide from spectra, with no need to select a reference spectrum.The simple optical layout of the Nicolet iS10Comprehensive Support for Your Needs• O n-site visits from factory-trained field service engineers • Technical phone support • Internet-based technical support • Performance maintenance programs • Classroom and on-site training programs • C ontract method and application development programsWorldwide Service and SupportThermo Scientific FTIR spectrometers are backed up by the support staff of the largest analytical instrumentation company in the world. Service and support are available almost everywhere. We have more FTIR-trained field service engineers and applications people to support you than any other company. Meeting all of your support needs is our highest priority.Find out more at /is10©2007-2017 Thermo Fisher Scientific Inc. All rights reserved.All trademarks are the property of Thermo Fisher Scientific and its subsidiaries. Specifications, terms and pricing aresubject to change. Not all products are available in all countries. Please consult your local sales representative for details. BR51502_E 09/17MNicolet iS10 FTIR spectrometerBeyond one-click operation, performance and ease-of-use• H ighest confidence when identifying impurities and mixtures• Continuous performance verification • Error-free sample information loading • Highest confidence in QC pass/fail results • Full set of tools for passing audits • Consistent sample preparation • Universal sampling tools • Electronic SOP authoringYou are responsible for providing answers. You require thehighest confidence in your results, efficient laboratory operation and low cost of ownership. The Thermo Scientific Nicolet iS10 FTIR spectrometer has been designed for you. Discover how the Nicolet iS10 system provides the performance, reliability, and simplicity you require.。

Serie 6, Forno da incasso, 60 x 60cm, AcciaioHBA257BS0Accessori integrati1 x Griglia combinata, 1 x Leccarda universale smaltataAccessori opzionaliHEZ538000 Guide telescopiche clip a 1 livello, HEZ538200 Guide telescopiche a 2 livelli, HEZ538S00 Guide telescop. a 2 livelli+1 guida clip, HEZ625071 Teglia per grigliare adatta a pirolisi,HEZ633001 Coperchio per tegame professionale, HEZ633070 Tegame professionale, HEZ634000 Griglia combinata 455x375x31 mm (LxPxA), HEZ636000 Leccarda in vetro 455x364x30 mm (LxPxA), HEZ638000 Guide telescopiche clip a 1 livello, HEZ638200 Set griglie telesc.2 liv.ad pl, HEZ638300 Set griglie telesc.3 liv.ad pl, HEZ660050 Accessory, HEZ664000 Griglia combinata 455x375x59 mm (LxPxA), HEZ915003 Pirofila in vetro con coperchio 5,4 l., HEZG0AS00 Cavo di collegamento 3m, HEZ317000 Teglia per pizza, HEZ327000 Pietra per pane e pizza, HEZ333001 Coperchio per leccarda extra profonda, HEZ530000 2 leccarde slim 455x188x39 mm (LxPxA), HEZ531000 Leccarda bassa 455x375x30 mm (LxPxA), HEZ531010 Leccarda antiaderen 455x375x30mm (LxPxA), HEZ532000 Leccarda profonda 455x375x38 mm (LxPxA), HEZ532010 Leccarda antiaderen 455x400x38mm (LxPxA),HEZ533000 Leccarda profonda 455x375x81 mm (LxPxA)Forno da incasso di moderno ed elegante design con programmi automatici di cottura: per preparare piatti perfetti.• Programmi automatici di cottura: cucinare sarà semplicissimo grazie ai programmi con impostazioni già preselezionate.• Comode manopole a scomparsa push-pull: per una pulizia piùsemplice del panello frontale.• EcoClean Direct: facile pulizia grazie a un rivestimento che dissolve il grasso durante la cottura.Dati tecniciTipologia costruttiva del prodotto: .....................................Da incasso Sistema di pulizia: ....Idrolisi, 3 pannelli catalitici, 3 pannelli catalitici Dimensioni del vano per l'installazione (AxLxP): 585-595 x 560-568 x 550 mmDimensioni (AxLxP): ............................................595 x 594 x 548 mm Dimensioni del prodotto imballato (AxLxP): .......675 x 660 x 690 mm Materiale del cruscotto: ..............................................................vetro Materiale porta: ..........................................................................vetro Peso netto: ..............................................................................34.1 kg Volume utile: .................................................................................71 l Metodo di cottura: .Grill a superficie grande, Aria calda delicata, aria calda, Riscaldamento statico, Funzione pizza, riscaldamento inferiore, grill ventilatoMateriale della cavità: .................................................................Altro Regolazione della temperatura: ..........................................Meccanico Numero di luci interne: (1)Lunghezza del cavo di alimentazione elettrica: .....................120.0 cm Codice EAN: (4242005056309)Numero di vani - (2010/30/CE): (1)Classe di efficienza energetica: .........................................................A Energy consumption per cycle conventional (2010/30/EC): ........0.97 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleIndice di efficienza energetica (2010/30/CE): ..........................95.3 % Potenza: ..................................................................................3400 W Corrente: .....................................................................................16 A Tensione: .............................................................................220-240 V Frequenza: ...........................................................................60; 50 Hz Tipo di spina: ..........................................................................Schuko Accessori inclusi: .......1 x Griglia combinata, 1 x Leccarda universale smaltataSerie 6, Forno da incasso, 60 x 60cm, AcciaioHBA257BS0Forno da incasso di moderno ed elegante design con programmi automatici di cottura: per preparare piatti perfetti.- Eco Clean: soffitto, parete posteriore, pareti laterale- Programma di pulizia EcoClean- Display digitale LCD a colore bianco- Programmi automatici: 10- Orologio elettronico con impostazione inizio e fine cottura- Raggiungimento temperatura- Illuminazione interna alogena- Volume cavità: 71 l- <8088brandlookup_nl(TUE,- KIN, SIK, SIB, REW, STA, TKS)>- Ventola tangenziale di raffreddamento- Assorbimento massimo elettrico: 3.4 kW- Dimensioni apparecchio (AxLxP): 595 mm x 594 mm x 548 mm- Dimensioni nicchia (AxLxP): 560 mm - 568 mm x 585 mm - 595 mm x 550 mm- Si prega di fare riferimento alle quote d'installazione mostrate nel disegno tecnicoEtichetta energetica- Classe di efficienza energetica (acc. EU Nr. 65/2014): A(in una scala di classi di efficienza energetica da A+++ a D)- Consumo energetico per ciclo durante funzionamento convenzionale:0.97 kWh- Consumo energetico per ciclo durante funzionamento ventilato:0.81 kWh- Numero di cavità: 1 Tipo di alimentazione: elettrica Volume della cavità:71 lDimensioniSerie 6, Forno da incasso, 60 x 60cm, Acciaio HBA257BS0。

Industrial Enclosures Wallmount Enclosures Application• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications. • Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.• A wide range of sizes and practical accessories make this product line a complete package.Standards• UL 508 T ype 3R, 4, and 12• CSA T ype 3R, 4, and 12• Complies with• NEMA T ype 3R, 4, and 12• IEC 60529, IP66Construction• Formed 14 or 16 gauge steel.• Smooth, continuously weldedseams ground smooth.• Door stiffeners are provided whererequired for increased strength andrigidity - designed to also permitadditional mounting options.• Formed lip on enclosure to excludefl owing liquids and contaminants.• Door latches feature the addedsafety of quarter turn slot requiringuse of tool for opening.• Doors may be easily removedfor modifi cations and areinterchangeable.• Seamless poured-in place gasket.• Collar studs provided for mountinginner panel.• Includes hardware kit with panelmounting nuts and sealing washersfor wall mounting holes.• Bonding stud provided on doorand grounding stud installed inenclosure• Hinges are constructed from 304stainless steel.• Hinge pins are stainless steel.• Quarter turn latch and multi-pointhandle (key lockable) are zincdiecast with black epoxy fi nish.• Door alignment guide provided on36" wide enclosures.Finish• Cover and enclosure arephosphatized and fi nished with arecoatable powder inside and outwith choice of ANSI 61 smooth Gray(GY) or RAL7035 textured light gray(LG).Accessories• Air conditioners...see page349-367• Blowers...see page392• Breather kits...see page400-401• DIN rails...see page30• DIN rail mounting kit...see page30• Door stop kit...see page453• Drip shield kit...see page451• Filter fans...see page371-384• Gland Plates...see page446• Heaters...see page393-396• Handles...see page31• Inner panel...see page29• Quarter turn inserts and keys...see page31• Literature pocket...see page456• Mounting foot kit...see page31• Swing frame...see page30• Swing panel...see page29• Rear Hole Plugs...see page32• Replacement hinge pins...see page29• Replacement quarter turnassemblies...see page31• Thermostats...see page397• T ouch up paint...see page455• UL/CSA approved hardware kit...see page433• Padlock Adapter (EP A)...see page 434 Single Door withquarter turnsSingle Door with multi-pointlatching handle and quarter turnsSingle Door with latching handleIndustrial EnclosuresWallmount EnclosuresRefer to part number and dimension chart on next pageIndustrial Enclosures Wallmount EnclosuresIndustrial EnclosuresWallmount EnclosuresEN4SD241610GY EN4SD241610LG 241610161Qtr. T urn EP241622.214.221830EN4SD242010GY EN4SD242010LG 242010161Qtr. T urn EP242022.218.221836EN4SD242410GY EN4SD242410LG 242410142Qtr. Turn EP242422.222.221845EN4SD243010GY EN4SD243010LG 243010142Qtr. Turn EP243022.228.221853EN4SD302010GY EN4SD302010LG 302010142Qtr. Turn EP302028.218.231247EN4SD302410GY EN4SD302410LG 302410142Qtr. Turn EP302428.222.231253EN4SD303010GY EN4SD303010LG 303010142Qtr. Turn EP303028.228.231275EN4SD362410GY EN4SD362410LG 362410142Qtr. Turn EP362434.222.231570EN4SD363010GY EN4SD363010LG 363010142Qtr. T urn EP363034.228.231584EN4SD363610GY EN4SD363610LG 363610142Qtr. Turn EP363634.234.2315100EN4SD423010GY EN4SD423010LG 4230101413-point EP423040.228.2412107EN4SD423610GY EN4SD423610LG 4236101413-point EP423640.234.2412117EN4SD482410GY EN4SD482410LG 4824101413-point EP482446.222.241495EN4SD483010GY EN4SD483010LG 4830101413-point EP483046.228.2414120EN4SD483610GY EN4SD483610LG 4836101413-point EP483646.234.2414125EN4SD603610GY EN4SD603610LG 6036101413-point EP603658.234.2418150EN4SD201612GY EN4SD201612LG 201612161Qtr Turn EP201618.214.221432EN4SD202012GY EN4SD202012LG 202012161Qtr Turn EP202018.218.221434EN4SD242012GY EN4SD242012LG 242012161Qtr Turn EP242022.218.221838EN4SD242412GY EN4SD242412LG 242412142Qtr Turn EP242422.222.221847EN4SD302412GY EN4SD302412LG 302412142Qtr Turn EP302428.222.231257EN4SD303012GY EN4SD303012LG 303012142Qtr T urn EP303028.228.231280EN4SD362412GY EN4SD362412LG 362412142Qtr T urn EP362434.222.231562EN4SD363012GY EN4SD363012LG 363012142Qtr Turn EP363034.228.231591EN4SD363612GY EN4SD363612LG 363612142Qtr Turn EP363634.234.2315104EN4SD423012GY EN4SD423012LG 4230121413-point EP423040.228.2412111EN4SD423612GY EN4SD423612LG 4236121413-point EP423640.234.2412121EN4SD482412GY EN4SD482412LG 4824121413-point EP482446.222.241498EN4SD483612GY EN4SD483612LG 4836121413-point EP483646.234.2414148EN4SD603612GY EN4SD603612LG 6036121413-point EP603658.234.2418165EN4SD723012GY EN4SD723012LG 723012142Qtr Turn, 5-point EP723070.228.2516.5190EN4SD723612GY EN4SD723612LG 723612142Qtr T urn, 5-point EP723670.234.2516.5195EN4SD242016GY EN4SD242016LG 242016161Qtr Turn EP242022.218.221852EN4SD242416GY EN4SD242416LG 242416142Qtr Turn EP242422.222.221866EN4SD302416GY EN4SD302416LG 302416142Qtr Turn EP302428.222.231285EN4SD363016GY EN4SD363016LG 363016142Qtr T urn EP363034.228.2315102EN4SD423616GY EN4SD423616LG 4236161413-point EP423640.234.2412140EN4SD483616GY EN4SD483616LG 4836161413-point EP483646.234.2414148EN4SD603616GYEN4SD603616LG6036161413-point EP603658.234.2418200EN4SD723016GY EN4SD723016LG 723016142Qtr Turn, 5-point EP723070.228.2516.5215EN4SD723616GY EN4SD723616LG 723616142Qtr Turn, 5-point EP723670.234.2516.5217EN4SD242420GY EN4SD242420LG 242420142Qtr Turn EP242422.222.221870EN4SD302420GY EN4SD302420LG 302420142Qtr Turn EP302428.222.231282EN4SD363020GY EN4SD363020LG 363020142Qtr T urn EP363034.228.2315117EN4SD483620GY EN4SD483620LG 4836201413-point EP483646.234.2414165EN4SD603620GYEN4SD603620LG6036201413-point EP603658.234.2418210EN4SD723020GY EN4SD723020LG 723020142Qtr T urn, 5-point EP723070.228.2516.5217EN4SD302424GY EN4SD302424LG 302424142Qtr T urn EP302428.222.2312115EN4SD723024GY EN4SD723024LG723024142Qtr Turn, 5-pointEP723070.228.2516.5220。

S P E C I M EN1.02.0PRECAUTIONARY STATEMENTS2.1HAZARD TO HUMANS AND DOMESTIC ANIMALS CAUTIONHarmful if inhaled or absorbed through the skin.Causes moderate eye irritation. Avoid breathing dust or spray mist. Avoid contact with skin, eyes, or clothing.Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove contaminated clothing and wash before reuse.2.2PERSONAL PROTECTIVE EQUIPMENT (PPE)Applicators and other handlers must wear:•Long-sleeved shirt and long pants •Waterproof gloves •Shoes plus socksMixer/loaders and applicators must wear a dust/mist filtering respirator meeting NIOSH standards of at least N-95, R-95, or P-95. Repeated exposure to high concentrations of microbial proteins can cause allergic sensitization.Follow manufacturer’s instructions for cleaning/main-taining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE sepa-rately from other laundry.2.3ENGINEERING CONTROLSWhen handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6)), the handler PPE requirements may be reduced or modified as specified in the WPS.IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for “applicators and other handlers”and have such PPE immediately available for use in an emergency, such as a spill or equipment break-down.ACTIVE INGREDIENT:Bacillus thuringiensis, subsp. kurstaki , strain ABTS-351,fermentation solids, spores, and insecticidal toxins* . . . 54%OTHER INGREDIENTS . . . . . . . . . . . . . . . . . . . . . 46%TOTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100%*Potency: 32,000 Cabbage Looper Units (CLU) per mg (14.5 billion CLU per pound).The percent active ingredient does not indicate product performance and potency measurements are not federally standardized.EPA Est. No. 33762-IA-001EPA Reg. No. 73049-39List No. 12046INDEX:1.0First Aid2.0Precautionary Statements2.1 Hazards To Humans and Domestic Animals 2.2 Personal Protective Equipment (PPE)2.3 Engineering Controls2.4 User Safety Recommendations 2.5 Environmental Hazards3.0Directions for Use4.0Agricultural Use Requirements5.0Non-Agricultural Use Requirements6.0Storage and Disposal7.0Directions for Use7.1 Chemigation Use Directions7.2 General Precautions for Applications ThroughSprinkler Irrigation Systems 7.3 Application Rate7.4 Forests and Ornamental Trees 8.0Notice To UserKEEP OUT OF REACH OF CHILDRENCAUTIOND i P e l P R O D F®BIOLOGICAL INSECTICIDE DRY FLOW ABLEFIRST AID•Take off contaminated clothing.•Rinse skin immediately with plenty of water for 15-20 minutes.•Call a poison control center or doctor for treatment advice.•Move person to fresh air.•If person is not breathing, call 911 or an ambulance, then give artificial respiration,preferably by mouth-to-mouth, if possible.•Call a poison control center or doctor for treatment advice.•Hold eye open and rinse slowly and gentlywith water for 15-20 minutes.•Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.•Call a poison control center or doctor for treatment advice.If on skin or clothingIf inhaled If in eyes Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-892-0099 (24 hours) for emergency medical treatment and/or transport emergency information.For all other information, call 1-800-89-VALENT (898-2536).HOT LINE NUMBERFOR ORGANIC PRODUCTION2.4USER SAFETY RECOMMENDATIONS•Users should remove clothing immediately if pesticidegets inside. Then wash thoroughly and put on cleanclothing.•User should remove PPE immediately after handling thisproduct. Wash the outside of gloves before removing.As soon as possible, wash thoroughly and change intoclean clothing.2.5ENVIRONMENTAL HAZARDSDo not contaminate water when cleaning equipment or disposing of equipment washwaters.This product must not be applied aerially within 1/4 mile of any habitats of endangered species or threatened lepidoptera. No manual application can be made within 300 feet of any threatened or endangered lepidoptera.3.0DIRECTIONS FOR USEIt is a violation of Federal law to use this product in a manner inconsistent with its labeling. For any require-ments specific to your State or Tribe, consult the agency responsible for pesticide regulation.4.0AGRICULTURAL USE REQUIREMENTSUse this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricul-tural pesticides. It contains requirements for training, decontamination, notification and emergency assistance.It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restrictive entry interval.The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application.Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours.PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treat-ed, such as plants, soil, or water is:•Coveralls•Waterproof gloves•Shoes plus socks5.0NON-AGRICULTURAL USE REQUIREMENTSThe requirements in this box apply to uses that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricul-tural plants on farms, forests, nurseries or greenhouses.Keep unprotected persons out of the treated areas until sprays have dried.6.0STORAGE AND DISPOSALDo not contaminate water, food, or feed by storage or disposal.Pesticide Storage: Reclose containers of unused DiPel PRO DF. Store in a dry place inaccessible to children and out of sunlight.Pesticide Disposal: Do not contaminate food or feed by disposal. Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.Container Disposal: Nonrefillable container. Do not reuse or refill this container. Completely empty bag into application equipment by shaking and tapping sides and bottom to loosen clinging particles. Offer for recycling, if available, or dispose of empty bag in a sanitary landfill or by incineration. Do not burn, unless allowed by State and local ordinances.7.0DIRECTIONS FOR USESee Chemigation section for chemigation use directions.Days to Harvest: There are no restrictions on applying DiPel®PRO DF up to the time of harvest. Individual State regulations may vary and should be consulted for allowable pre-harvest application intervals.Sites: DiPel PRO DF may be used for any labeled pest in both field and greenhouse use as well as in self-contained, closed system, ornamental ponds.DiPel PRO DF is an insecticide for use against listed caterpillars (larvae) of lepidopterous insects. Close scouting and early attention to infestations is highly recommended. Larva must eat deposits of DiPel PRO DF to be affected. Always follow these directions:•Treat when larvae are young (early instars) before thecrop is damaged.•Larvae must be actively feeding on treated, exposedplant surfaces.•Thorough spray coverage is needed to provide a uni-form deposit of DiPel PRO DF at the site of larvalfeeding. Use overhead and drop nozzles to obtaingood spray coverage on both sides of foliage. Usesufficient spray volume to insure uniform depositionon all plant surfaces.•Under heavy pest population pressure, use the higherlabel rates, shorten the spray interval, and/or raisespray volume to improve spray coverage.•Repeat applications at an interval sufficient to main-tain control, usually 3 to 14 days depending on plantgrowth rate, moth activity, rainfall after treating, andother factors. If attempting to control a pest with asingle spray, make the treatment when egg hatch isessentially complete, but before crop damage occurs.•A spreader-sticker which has been approved for useon growing and harvested crops should be addedfor hard-to-wet crops such as cabbage, or to improveweather-fastness of the spray deposits.•DiPel PRO DF is a non-restricted use pesticide anddoes not require a restricted use permit for purchaseand use.•DiPel PRO DF may be tank mixed with other labeledinsecticides to enhance control. Use of the resulting tankmix must be in accordance with the more restrictivelabel limitations and precautions. No dosage ratesshould be exceeded. This product cannot be mixedwith any product containing a label prohibition againstsuch mixing. Before tank mixing DiPel PRO DF withother labeled products, including spreader stickers,check for tank mix compatibility.After ingesting a lethal dose of DiPel PRO DF, larvae stop feeding within the hour, and will die within several hours to 3 days. Mortality varies with larval size (instar), lepidopteran species, and dose consumed. Following ingestion, larvae become sluggish, discolor, then shrivel, blacken and die. Smaller larvae die more quickly.DiPel PRO DF may be applied in conventional ground or aerial equipment with quantities of water sufficient to provide uniform coverage of infested plant parts. The vol-ume of water needed per acre will depend on crop devel-opment, relative humidity, spray equipment, and local experience. Usually, selection of moderate to high spray volume will provide the best results in most equipment.For optimal results, use at least 20 gallons of water per acre for ground application. For aerial application use at least 3 gallons of water per acre; exception being arid areas, where 5 to 10 gallons are required. Add water to the mix tank and provide moderate agitation. While agitating, add the required amount of DiPel PRO DF.Continue agitation, and add other spray materials, if any. Add remaining water, if any, and agitate until fully mixed. Maintain the suspension with moderate agita-tion while loading and spraying. Do not mix more DiPel PRO DF than can be used in a 3 day period.Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-and-weather-related factors deter-mine the potential for spray drift. The applicator and the grower are responsible for considering all of these factors when making decisions.For Smaller Spray Volumes:Use This Amount If Rate is Per Gallon (wt)1/4 lb/A or 100 gals1/2 tsp(0.04 oz)1/2 lb/A or 100 gals 1 tsp(0.08 oz)1 lb/A or 100 gals2 tsps(0.16 oz)2 lb/A or 100 gals 4 tsps(0.32 oz)7.1CHEMIGATION USE DIRECTIONSApply this product only through sprinkler including center pivot, lateral move, end tow, side (wheel) roll, traveler, big gun, solid set, or hand move irrigation systems. Do not apply this product through any other type of irrigation systems. Do not connect an irrigation system (including greenhouse systems) used for pesticide applications to a public water system.Crop injury, lack of effectiveness, or illegal residues in the crop can result from nonuniform distribution of treat-ed water. A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut thesystem down and make necessary adjustments shouldthe need arise. Allow sufficient time for pesticide to beflushed through all lines and all nozzles before turningoff irrigation water.Spray PreparationFirst prepare a suspension of DiPel PRO DF in a mixtank. Fill tank with 1/2 to 3/4 the desired amount of water.Start mechanical or hydraulic agitation. Add the requiredamount of DiPel PRO DF, and then the remaining volume of water. Then set the sprinkler to deliver aminimum of 0.1 to 0.3 inch of water per acre. Startsprinkler and uniformly inject the suspension of DiPelPRO DF into the irrigation water line so as to deliverthe desired rate per acre. The suspension of DiPelPRO DF should be injected with a positive displacementpump into the main line ahead of a right angle turn toinsure adequate mixing. Any questions on calibrationshould be directed to your State Extension ServiceSpecialists, to equipment manufacturers or other experts.NOTE:When treatment with DiPel PRO DF has beencompleted, further field irrigation over the treated areashould be avoided for 24 to 48 hours to prevent washingthe material off the crop.7.2GENERAL PRECAUTIONS FOR APPLICATIONSTHROUGH SPRINKLER IRRIGATION SYSTEMSMaintain continuous agitation in the mix tank duringmixing and application to insure a uniform suspension.Greater accuracy in calibration and distribution will beachieved by injecting a larger volume for a more dilutesolution per unit time.The system must contain a functional check valve, vac-uum relief valve, and low pressure drain appropriatelylocated on the irrigation pipeline to prevent watersource contamination from backflow.The pesticide injection pipeline must contain a func-tional, automatic, quick-closing check valve to preventthe flow of fluid back toward the injection pump.The pesticide injection pipeline must also contain afunctional, normally closed, solenoid-operated valvelocated on the intake side of the injection pump andconnected to the system interlock to prevent fluid frombeing withdrawn from the supply tank when the irrigationsystem is either automatically or manually shut down.The system must contain functional interlocking controlsto automatically shut off the pesticide injection pumpwhen the water pump motor stops.The irrigation line or water pump must include a func-tional pressure switch which will stop the water pumpmotor when the water pressure decreases to the pointwhere pesticide distribution is adversely affected.Systems must use a metering pump, such as a positivedisplacement injection pump (e.g., diaphragm pump)effectively designed and constructed of materials thatare compatible with pesticides and capable of being fittedwith a system interlock. Do not apply when wind speedfavors drift beyond the area intended for treatment,systemconnections or fittings leak, nozzles do not provide uni-form distribution or when lines containing the productmust be dismantled and drained.7.3APPLICATION RATECrop Pests Pounds/Acre Flowers, Bedding Looper 1/4 - 1Plants and T obacco Budworm 1/4 - 1Ornamentals*Omnivorous Looper 1/4 - 1Omnivorous Leafroller 1/4 - 1Diamondback Moth 1/4 - 1Armyworm11 - 2Ello Moth (Hornworm)1/4 - 1Io Moth 1/4 - 1Oleander Moth 1/4 - 1Azalea Caterpillar 1/4 - 1GREENHOUSE/SHADEHOUSE AND OUTDOOR NURSERYCrop Pests Pounds/AcreCrops including butHeliothis virescens 1/2 - 2not limited to:Helicoverpa zea 1/2 - 2Vegetable, leafy,except brassica(group 4), Vegetable,brassica leafy (group 5), Vegetable, fruiting (group 8), Herbs and spices (group 19)Herbs and spices Looper 1/2 - 1(group 19), and Saltmarsh Caterpillar 1/2 - 1Mint including, but not Armyworm11 - 2limited to: Basil, Chive, Dill and Peppermint Turf Sod Webworm 1 - 2*For best results, use a ground applicator, a minimum of 50 gallons total mix per acre, 50-100 psi and 3-7 nozzles per bed.1DiPel PRO DF may be used to control small armyworms and/or podworms (1st and 2nd instar) when populations are light and full coverage sprays are applied. Repeat treatment as necessary.If mature worms or heavy populations are present a contact insecticide should be used to enhance control.AQUATIC ORNAMENTALSCrop Pests Use Rate*Water lilies and China Mark Moth 1/4 - 1/2other aquatic teaspoon/ornamentals 100 sq ft(0.6 - 1.2 g/100 sq ft)FOR USE IN SELF-CONTAINED, CLOSED-SYSTEM,ORNAMENTAL PONDS ONLY .*For a 10' x 10' pond (100 sq ft) mix 1/4 - 1/2 teaspoon of DiPel PRO DF in 1 quart of water and apply to pond surface. Adjust quantities accordingly based on specific pond size.7.4FORESTS AND ORNAMENTAL TREESCropPests lbs/100 Gallons*Forest, Shade, Sugar Gypsy Moth 1/2 - 1Maple Trees and Bagworm 1/2 - 1Ornamental TreesRedhumped Caterpillar 1/2 - 1Spring and Fall 1/2 - 1Cankerworm Fall Webworm 1/2 - 1Elm Spanworm 1/2 - 1T ent Caterpillar 1/2 - 1California Oakworm 1/2 - 1Pine Butterfly 1/2 - 1Spruce Budworm 1/2 - 1Saddle Prominent 1/2 - 1CaterpillarDouglas Fir Tussock 1/2 - 1MothWestern Tussock Moth 1/2 - 1Fruittree Leafroller 1/2 - 1Blackheaded Budworm 1/2 - 1Mimosa Webworm 1/2 - 1Jackpine Budworm 1/2 - 1Saddleback Caterpillar 1/2 - 1Greenstriped 1/2 - 1Mapleworm Hemlock Looper 1/2 - 1*Rate for hydraulic sprayer. For mist blowers, mix the appli-cable amount (lbs) in 10 gallons of water.NOTE: Inclusion of a suitable spreader-sticker approved for forest insect control is recommended to improve coverage, rain fastness and/or resist wash-off.8.0NOTICE TO USERT o the extent consistent with applicable law, seller makes no warranty, express or implied, of merchantability, fitness or otherwise concerning the use of this product other than as indicated on the label. User assumes all risks of use, storage or handling not in strict accordance with accompanying directions.DiPel is a registered trademark of Valent BioSciencesCorporation.Products That Work, From People Who Care is a registered trademark of the Valent U.S.A. Corporation.©2009 Valent BioSciences CorporationRegistered and Manufactured by:Valent BioSciences Corporation870 T echnology Way, Libertyville, IL 6004804-6278/R5 (Pkg. 04-5620/R5)Distributed by Valent U.S.A. CorporationP .O. Box 8025, Walnut Creek, CA 94596-8025For state registration and/or supplemental labels, please call or visit us online.Products That Work, From People Who Care ®| |800-89-VALENT (898-2536)Read and follow the label instructions before using.DiPel is a registered trademark of Valent BioSciences Corporation. Products That Work, From People Who Care is a reg-istered trademark of Valent U.S.A. Corporation. ©2009 Valent U.S.A. Corporation. All rights reserved. Printed in the USA.2009-DPRO-0001 11/09 AV。

韩国迷珂宝大马士革玫瑰洗发水成分表
【实用版】
目录
1.导语
2.韩国迷珂宝大马士革玫瑰洗发水成分表概述
3.成分表详细成分介绍
4.结论
正文
【导语】
韩国迷珂宝大马士革玫瑰洗发水是一款受到众多消费者喜爱的洗发
产品。

该洗发水以天然成分为主要原料，具有温和清洁头皮、滋养秀发的功效。

本文将为大家详细介绍韩国迷珂宝大马士革玫瑰洗发水的成分表，帮助大家了解其具体成分及功效。

【韩国迷珂宝大马士革玫瑰洗发水成分表概述】
韩国迷珂宝大马士革玫瑰洗发水成分表包含了多种天然植物提取物
和氨基酸等成分，为消费者提供了一个安全、温和、高效的洗发体验。

【成分表详细成分介绍】
1.水：作为洗发水的基础成分，能够迅速溶解其他成分，使之更易于分散和渗透。

2.椰油酰胺丙基甜菜碱：是一种从天然椰油中提取的表面活性剂，具有良好的起泡性和去污力，能够温和清洁头皮和秀发。

3.椰油酰胺 MEA：是一种从天然椰油中提取的氨基酸表面活性剂，温和无刺激，能够滋养头皮和秀发。

4.大马士革玫瑰精油：具有抗炎、抗氧化、舒缓的功效，能够滋养头
皮，改善头皮环境。

5.迷迭香油：具有抗氧化、抗炎、收敛的功效，能够修护受损秀发，提高秀发光泽度。

6.柠檬酸：具有抗氧化、抗炎、收敛的功效，能够修护受损秀发，提高秀发光泽度。

7.维生素 E：具有抗氧化、抗炎、滋养的功效，能够修护受损秀发，提高秀发光泽度。

【结论】
韩国迷珂宝大马士革玫瑰洗发水成分表中包含了多种天然植物提取
物和氨基酸等成分，能够温和清洁头皮、滋养秀发，为消费者提供了一个安全、温和、高效的洗发体验。

IMOUTH（艾莫斯）果吸2产品使用手册首先感谢您选择使用IMOUTH（艾莫斯）果吸产品。

请在使用产品之前仔细阅读这份说明书，然后按照正确的使用规范去使用。

产品介绍本产品创新采用医药级别包装，干净卫生，已通过美国与欧盟安全健康认证，对人体无任何有害影响。

焦油有害微量颗粒二手烟功能阐述●清新怡人！健康提神！●彰显品位！随行随用！产品说明IMOUTH（艾莫斯）果吸产品结构：产品由天然植物萃取液替换装、电池杆等部件组成，电池杆底部有LED指示灯；使用说明1、常规使用●电池杆和天然植物萃取液替换装的螺丝口按正确方法拧紧；●打开顶部的密封盖，将产品放入口中做吸食动作即可；●吸食最佳姿势为呈水平状态或吸嘴向上。

2、充电●使用时，指示灯不停闪烁，却没有出现雾时，请将电池杆进行充电，充电步骤为：①连接电池杆与USB；②充电器与电源连接开始充电，USB上的灯变为红色；③USB上的灯转为绿色时，充电完成；●配置的充电器为IMOUTH（艾莫斯）果吸专用充电器，不可随意替换。

3、更换天然植物萃取液替换装当电池充满电而产品出雾量仍然有明显减少时，需更换新的天然植物萃取液替换装，更换步骤十分简单：①将用尽的天然植物萃取液替换装拆卸下来；②将新的天然植物萃取液替换装与电池杆按正确方法相拧合，可继续使用。

4、故障排查重新安装天然植物萃取液替换装或者更换电池杆后，在使用时，指示灯亮而没有雾出现，请检查电池杆和天然植物萃取液替换装的螺丝，清洁其表面并再次拧紧。

注意事项●18岁以下的未成年人、孕妇和哺乳期妇女禁止使用；●远离高温环境；●避免儿童接触；●避免摔打及倒置；●如有少许漏油，属正常现象，请放心使用。