TL062_07中文资料

表面贴装集成电路SURFACE MOUNT INTEGRATED CIRCUITTYPE NO. FUNCTIONPIN TYPE NO. FUNCTIONPIN LM358 单电源通用型双运放8 UC3843 脉宽调制8/14 UPC1251 单电源通用型双运放（工业级） 8 UC3844 脉宽调制（开关电源） 14 LM741 单运放（通用型）8 LM317 三端可调（1.25~37V ） 8 UPC258 双运放（通用型）（工业级） 8 LM337 三端可调（1.25~37V ） 8 LM1458 双运放（通用型） 8 LM385 基准二极管(1.25V,2.5V) 8 LM4558 双运放（通用型） 8 78L05 三端稳压5V/100MA 3/8 LM324 单电源四运放14 78DS05 三端稳压5V/30MA(低压差) 3 UPC451 单电源四运放（工业级） 14 78L06 三端稳压6V/100MA 3 LM3403 单电源四运放 14 78L09 三端稳压9V/100MA 3 LM4741 单电源四运放 14 78L12 三端稳压12V/100MA 3 LF353 BI-GET 输入型双运放 8 79L05 三端稳压-5V/100MA 3 TL061 低功耗JFET 输入单远放 8 79L06 三端稳压-6V/100MA 3 TL062 低功耗JFET 输入双远放 8 79L09 三端稳压-9V/100MA 3 TL064 低功耗JFET 输入四远放 14 79L12 三端稳压-12V/100MA 3 TL072 低功耗JFET 输入双远放 8 78M05 三端稳压5V/500MA 3 TL074 低功耗JFET 输入四远放 14 78D05 三端稳压5V/500MA(低压差) 3 MC34074 高性能、单电源四远放 14 78M12 三端稳压12V/500MA 5 TL081 BEJFET 输入单远放 8 79M05 三端稳压-5V/500MA 3 TL082 BJ-JFET 输入双远放 8 79M12 三端稳压-12V500MA 3 TL084 BJ-JFET 输入四远放 14 A1600 单调MOSFET 陈列*8 16 UPC4572 高性能双远放 8 MC1403 精密基准二极管2.5V 8 UPC4574 高性能四远放 14 MC34063 开关电源 8 LM339 四电压比较器 14 MC34064 欠压传感电路 8 LM393 双电压比较器8 CD4001 二输入端四或非门 14 UPC277 双电压比较器（工业级） 8 CD4007 双互补对加倒相器 14 LM311 通用比较器（单） 8 CD4011 二输入端四与非门 14 LM319 高速双比较器8 CD4013 双D 触发器 14 LM2901 四电压比较器（-20℃~） 14 CD4016 四与向模拟开关 14 LM2902 单电源四运放（-20℃~） 14 CD4017 十进制计数/分配器 16 LM2903 双电压比较器（-20℃~） 8 CD4019 四与或选择器 16 LM2904 双电压比较器（-20℃~） 8 CD4021 八位静态移位寄存器 16 7660 电源变换器 8 CD4027 双J-K 触发器 16 LM386 功率放大 8 CD4028 BCD 十进制译码器 16 LM555 时基电路 8 CD4030 四异或门14 LMC555 COMS 时基电路 8 CD4040(HC) 四R/S 锁存器（与非三态） 14 LM556 双时基电路 14 CD4043 四R/S 锁存器（与非三态） 14 TLC556 CMOS 双时基电路 14 CD4046 锁相环16 TL431 可调三端 3/8 CD4049 六反相缓冲器/转换器 16 TL1451 双脉宽调制控制 16 CD4050(HC) 六同相缓冲器/转换器 16 D4990 串行I/O 实时时钟 16 CD4051 八选一模拟开关 16 OP07 低失调电压型运放 8 CD4052 双四选一模拟开关 16 OP27 低噪声低失调电压型运放 8 CD4053 三组二路双向模拟开关 16 OP37 低噪声低失调电压型运放（高速） 8 CD4060 14位串行二进制计数/分频/振荡 14 OP177 低失调电流型运放 8 CD4066 四双向模拟开关 14 7106 3 1/2DVM 用A/D 液晶 44 CD4069 六反相器 14 7107 3 1/2DVM 用A/D 数码管44 CD4070 四异或门 14 7117 3 1/2DVM 用A/D 数码管（HCLD ） 44 CD4071 二输入端四或门 14 D7554 4-Bit 单片机 20 CD4081 二输入端四或门14 MN1035 运放 8 CD4093 二输入端四与非史密特触发器 14 NJM318 高速单运放 8 CD4094 八位移位存储总线寄存器 16 TA76494 开关式稳压源 16 CD4512 八通道数据选择器 16 TL494 开关式稳压源 16 CD4516 二进制四位可逆计数器 16 MB3759 开关式稳压源 16 CD4518 双BCD 加法计数器 16 UC3842脉宽调制14CD4520双二进制加法计数器16表面贴装集成电路SURFACE MOUNT INTEGRATED CIRCUIT。

TLMW07 全方位监测器1 产品简介该TLMW07是根据微波多普勒效应原理（也就是雷达基本原理）制作成的，可广泛应用于类似自动门控制开关、安全防范系统、A TM自动提款机的自动录像控制系统、以及其他需要自动感应控制的场所。

这种探测方式与其它探测方式相比具有如下的优点：１、非接触探测；２、不受温度、湿度、噪声、气流、尘埃、光线等影响，适合恶劣环境；3、抗射频干扰能力强；４、输出功率仅有5mW，对人体构不成危害。

安装及接线简单。

这和市场上常见的简易型微波感应控制器相比较，因为采用专用的微处理集成器，不但检测灵敏度度高，探测范围宽，而且工作非常可靠，误报率极低，能在－25～＋45度的温度范围内稳定工作。

TLMW07开关量信号可设置，探测灵敏度、距离可调，报警时间、距离可设置，探测方向可调，穿透性能好。

输出周期为2秒-180秒可设置。

2 应用领域1.A TM、自动柜员机、A TM监控2.家庭3.商店4.工厂5. 宾馆、6.机关、7.其他防盗等安防装置8.A TM自动提款机3 产品特征电源：DC 6V~12V，微波探头感应有效距离：0~ 7M，模块尺寸：48mm*30mm*12mm，天线采用软质材料制成。

控制器的外形右图所示，面板上设置有灵敏度调整孔，可以使监控距离在0～7米范围内可调，可以通过电路板的可调电阻来调节探测距离。

此微波感应控制器工作非常可靠，一般没有误报，是以往红外线、超声波、热释电元件组成的报警电路以及常规微波电路所无法比拟的，是目前用于安全防范和自动监控以及自动感应的最佳产品。

4典型应用下面介绍运用高可靠微波感应控制器制作的实用电子装置，它们的共同特点是线路新颖简单，实用性强，制作容易，性价比高。

一、自动感应灯灯可以自动识别周围环境光的亮度，能够实现人来灯亮，人走灯灭，不会误动作，可靠性高，而且电路的工作状态不会受自身灯光的干扰，可以广泛地运用在走廊、卫生间、庭院等场合实现自动照明。

二、使用于A TM机器及其他自动化控制设备当微波探测器感应到人体后，将在信号线输出一个高电平信号，A TM主控机检测到这个信号后，将打开摄像机并将录像指令传给硬盘录像机，如果是晚上，还可以同步打开红外补光灯做摄像机的辅助照明。

e 32A01 - 2A072.0A RECTIFIERFeaturesMaximum Ratings and Electrical Characteristics@ T A = 25°C unless otherwise specified·Diffused Junction·High Current Capability and Low Forward Voltage Drop ·Surge Overload Rating to 70A Peak·Lead Free Finish, RoHS Compliant (Note 3)Mechanical Data·Case: DO-15·Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0·Moisture Sensitivity: Level 1 per J-STD-020C·Terminals: Finish – Bright Tin. Solderable per MIL-STD-202,Method 208·Polarity: Cathode Band ·Marking: Type Number·Weight: 0.4 grams (approximate)Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%.Notes: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case.2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V DC.3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.0.010.11.0100.40.8 1.21.6I ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A )F VF,INSTANTANEOUS FORWARD VOLTAGE (V)Fig.2Typical Forward Characteristics1.0101001.010100C ,T O T A L C A P A C I T A N C E (p F )T V ,REVERSE VOLTAGE (V)Fig.4Typical Total CapacitanceR 02.5I ,A V E R A G E F O R W A R D R E C T I F I E D C U R R E N T (A )O T ,AMBIENT TEMPERATURE (ºC)Fig.1Forward Current Derating CurveA 2550751001251501752000.51.01.52.0110100I ,P E A K F O R W A R D S U R G E C U R R E N T (A )F S M NUMBER OF CYCLES AT 60HzFig.3Max Non-Repetitive Peak Fwd SurgeCurrent03060754515Ordering InformationNotes:4.For packaging details, visit our website at /datasheets/ap02008.pdf.(Note 4)IMPORTANT NOTICEDiodes Incorporated and its subsidiaries reserve the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein;neither does it convey any license under its patent rights,nor the rights of others.The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,harmless against all damages.LIFE SUPPORTDiodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.。

LS A676, LA A676, LO A676, LY A676Hyper SIDELED ®Hyper-Bright LED2002-09-181Besondere Merkmale•Geh äusetyp: wei ßes SMT Geh äuse•Besonderheit des Bauteils: Abstrahlung parallel zur Platine, deshalb ideal zur Einkopplung in Lichtleiter•Wellenl änge: 633 nm (super-rot), 615nm (amber), 606 nm (orange), 587nm (gelb)•Abstrahlwinkel: Lambertscher Strahler (120°)•Technologie: InGaAlP•optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot)•Gruppierungsparameter: Lichtst ärke, Wellenl änge•Verarbeitungsmethode: f ür alle SMT-Best ücktechniken geeignet •L ötmethode: IR Reflow L öten und Wellenl öten (TTW)•Vorbehandlung: nach JEDEC Level 2•Gurtung: 12 mm Gurt mit 2000/Rolle, ø330mm Anwendungen•optischer Indikator•Einkopplung in Lichtleiter•Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung)•Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.ä.)•Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.)•Signal- und SymbolleuchtenFeatures•package: white SMT package•feature of the device: radiation directionparallel to PCB, so an ideal LED for coupling in light guides•wavelength: 633 nm (super-red), 615 (amber), 606 nm (orange), 587 nm (yellow)•viewing angle: Lambertian Emitter (120°)•technology: InGaAlP•optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red)•grouping parameter: luminous intensity, wavelength•assembly methods: suitable for all SMT assembly methods•soldering methods: IR reflow soldering and TTW soldering•preconditioning: acc. to JEDEC Level 2•taping: 12 mm tape with 2000/reel, ø330mmApplications•optical indicators•coupling into light guides•backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting)•interior automotive lighting. (e.g. dashboard backlighting, etc.)•marker lights (e.g. steps, exit ways, etc.)•signal and symbol luminaire2002-09-182Anm.:-1 gesamter Farbbereich (siehe Seite 4)-24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)-26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,die aus nur 3bzw.4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.In einer Verpackungseinheit /Gurt ist immer nur eine Halbgruppe enthalten.Note:-1 Total color tolerance range (please see page 4)-24 Total color tolerance range, delivery in single groups (please see page 5)-26 Total color tolerance range, delivery in single groups (please see page 5)The standard shipping format for serial types includes a lower or upper family group of 3or 4individual groups. Individual half groups are not available.No packing unit /tape ever contains more than one luminous intensity half group.TypTypeEmissions-farbe Color of EmissionFarbe derLichtaustritts-fl ächeColor of the Light Emitting AreaLichtst ärkeLuminous Intensity I F = 20mA I V (mcd)LichtstromLuminous FluxI F = 20mA ΦV (mlm)BestellnummerOrdering CodeLS A676-N2P2-1LS A676-P2R1-1super-red colorless clear 35.5 ...71.056.0 ...140.0150 (typ.)280 (typ.)Q62703Q5074Q62703Q5075LA A676-Q1R1-1LA A676-R1S2-1amber colorless clear 71.0 ...140.0112.0 ...280.0310 (typ.)560 (typ.)Q62703Q4972Q62703Q4973LO A676-Q1R1-24LO A676-R1S2-24orange colorless clear 71.0 ...140.0112.0 ...280.0310 (typ.)560 (typ.)Q62702Q5032Q62702Q5033LY A676-P2Q2-26LY A676-Q2S1-26yellowcolorless clear56.0 ...112.090.0 ...224.0240 (typ.)440 (typ.)Q62703Q5111Q62703Q5112Grenzwerte Maximum RatingsBezeichnung Parameter SymbolSymbolWerteValuesEinheitUnitLS, LO, LA LYBetriebstemperatur Operating temperature range Top– 55 … + 100°CLagertemperaturStorage temperature range Tstg– 55 … + 100°CSperrschichttemperatur Junction temperature Tj+ 100°CDurchlassstrom Forward current IF30mAStoßstromSurge currentt≤ 10 µs, D = 0.005IFM10.2ASperrspannung1) Reverse voltage VR12VLeistungsaufnahme Power consumption Ptot80mWWärmewiderstand Thermal resistanceSperrschicht/UmgebungJunction/ambientSperrschicht/LötpadJunction/solder pointMontage auf PC-Board FR 4 (Padgröße ≥ 16mm2) mounted on PC board FR 4 (pad size ≥ 16 mm 2)Rth JARth JS530300K/WK/W1)für kurzzeitigen Betrieb geeignet / suitable for short term application2002-09-1832002-09-184Kennwerte (T A = 25 °C)Characteristics Bezeichnung ParameterSymbol SymbolWerte Values Einheit UnitLSLA LO LY Wellenl änge des emittierten Lichtes (typ.)Wavelength at peak emission I F = 20mAλpeak645622610591nmDominantwellenl änge 1)(typ.)Dominant wavelength 1)I F = 20mAλdom633± 6615± 6606–6/+3587–7/+8nmSpektrale Bandbreite bei 50 % I rel max (typ.)Spectral bandwidth at 50 % I rel max I F = 20mA∆λ16161615nmAbstrahlwinkel bei 50 % I V (Vollwinkel)(typ.)Viewing angle at 50 % I V 2ϕ120120120120Grad deg.Durchlassspannung 2)(typ.)Forward voltage 2)(max.)I F = 20mA V F V F 2.02.4 2.02.4 2.02.4 2.02.4V VSperrstrom(typ.)Reverse current (max.)V R = 12 VI R I R 0.01100.01100.01100.0110µA µATemperaturkoeffizient von λpeak (typ.)Temperature coefficient of λpeak I F = 20mA; –10°C ≤ T ≤ 100°C TC λpeak0.140.130.130.13nm/KTemperaturkoeffizient von λdom (typ.)Temperature coefficient of λdom I F = 20mA; –10°C ≤ T ≤ 100°C TC λdom0.050.060.070.10nm/KTemperaturkoeffizient von V F (typ.)Temperature coefficient of V F I F = 20mA; –10°C ≤ T ≤ 100°C TC V– 2.0– 1.8– 1.7– 2.5mV/KOptischer Wirkungsgrad (typ.)Optical efficiency I F = 20mAηopt7111111lm/W1)Wellenl ängen werden mit einer Stromeinpr ägedauer von 25ms und einer Genauigkeit von ±1nm ermittelt.Wavelengths are tested at a current pulse duration of 25ms and a tolerance of ±1nm.2)Spannungswerte werden mit einer Stromeinpr ägedauer von 1ms und einer Genauigkeit von ±0,1V ermittelt.Voltages are tested at a current pulse duration of 1ms and a tolerance of ±0.1V.2002-09-185Helligkeitswerte werden mit einer Stromeinpr ägedauer von 25ms und einer Genauigkeit von ±11% ermittelt.Luminous intensity is tested at a current pulse duration of 25ms and a tolerance of ±11%.1)Wellenl ängengruppen / Wavelength groupsGruppe Group yellow orange Einheit Unit min.max.min.max.2580583600603nm 3583586603606nm 4586589606609nm 5589592nm 6592595nmHelligkeits-GruppierungsschemaLuminous Intensity Groups LichtgruppeLuminous Intensity Group Lichtst ärkeLuminous Intensity I V (mcd)Lichtstrom Luminous Flux ΦV (mlm)N2P1P2Q1Q2R1R2S1S235.5 ...45.045.0 ...56.056.0 ...71.071.0 ...90.090.0 ...112.0112.0 ...140.0140.0 ...180.0180.0 ...224.0224.0 ...280.0120 (typ.)150 (typ.)190 (typ.)240 (typ.)300 (typ.)380 (typ.)480 (typ.)600 (typ.)760 (typ.)Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: P2-3Example: P2-3LichtgruppeLuminous Intensity Group Halbgruppe Half Group Wellenl änge Wavelength P23Relative spektrale Emission I rel = f (λ), T A = 25 °C, I F = 20mA Relative Spectral EmissionV(λ) = spektrale AugenempfindlichkeitStandard eye response curveAbstrahlcharakteristik I rel = f (ϕ)2002-09-186Durchlassstrom I F = f (V F)Forward CurrentMaximal zulässiger Durchlassstrom I F = f (T) Max. Permissible Forward Current Relative Lichtstärke I V/I V(20mA) = f (I F) Relative Luminous IntensityV V(25 °C)ARelative Luminous Intensity2002-09-187Zulässige Impulsbelastbarkeit I F = f (t p) Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 25 °CF p Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 85 °CZulässige Impulsbelastbarkeit I F = f (t p) Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 25 °CF p Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 85 °C2002-09-188MaßzeichnungPackage OutlinesMaße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung:abgeschrägte EckeCathode mark:bevelled edgeGewicht / Approx. weight:40 mg2002-09-189Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil(nach IPC 9501)IR Reflow Soldering Profile(acc. to IPC 9501)2002-09-1810Wellenlöten (TTW)(nach CECC 00802)TTW Soldering(acc. to CECC 00802)2002-09-1811Empfohlenes Lötpaddesign Wellenlöten (TTW)Recommended Solder Pad TTW SolderingMaße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2002-09-1812Empfohlenes Lötpaddesign IR Reflow LötenRecommended Solder Pad IR Reflow SolderingMaße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gurtung / Polarität und Lage Verpackungseinheit2000/Rolle, ø330 mm Method of Taping / Polarity and Orientation Packing unit2000/reel, ø330 mmMaße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)2002-09-18132002-09-1814Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved.Attention please!The information describes the type of component and shall not be considered as assured characteristics.All typical data and graphs are basing on representative samples, but don ’t represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version in the Internet.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.1A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.2Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.Revision History:2002-09-18Date of changePrevious Version:2002-08-19Page Subjects (major changes since last revision)12recommended solder pad (TTW soldering)4value (wavelength amber/yellow 5wavelength groups2wavelength grouping for yellow and orange 14annotations2002-07-254value (TC λdom from 0.04 to 0.05nm/K)2002-07-2513recommended solder pad (IR reflow soldering)2002-08-013, 4value (reverse voltage from 3V to 12V)2002-09-18。

责任声明：1.该文章为在校研究生借助于谷歌翻译等工具自行翻译为中文资料，不代表官方意愿。

2.该文章只能用于学习交流之用，不可用于一切商业用途，否则后果自负，本作者不承担任何责任。

3.由于作者水平有限，难免有错误之处，此文章只做参考，以英文官方文献为准。

由于参考本文内容所造成的损失，后果自行承担。

4.如有侵权，请及时联系我删除。

QQ：782020255TEA5767HN一、一般说明TEA5767HN是一款单芯片电子调谐FM立体声收音机，适用于低压应用，具有完全集成的IF选择性和解调功能。

收音机完全无需调整，只需要最少的小型和低成本外部组件。

收音机可以调谐到欧洲，美国和日本FM频段。

二、特征1.集成低噪声RF输入放大器，灵敏度高2.用于转换为美国/欧洲（87.5MHz至108MHz）和日本（76MHz至91MHz）FM频段的IF的FM调音台3.预设调谐以接收高达108MHz的日本电视音频4.RF自动增益控制（AGC）电路5.LC调谐器振荡器采用低成本固定芯片电感器工作6.内部执行FM IF选择性7.由于完全集成的FM解调器，无需外部鉴别器8.晶体参考频率振荡器;振荡器以32.768kHz时钟工作9.晶体或13MHz晶体，外部施加6.5MHz参考频率10.PLL合成器调谐系统11.I2C总线和3线总线，可通过引脚BUSMODE选择12.通过总线输出7位IF计数器13.通过总线输出4位信息14.柔软的静音15.信号相关的单声道到立体声混合[立体声降噪（SNC）16.信号相关高切控制（HCC）17.可以通过总线关闭软静音，SNC和HCC18.免调整立体声解码器19.自主搜索调整功能20.待机模式21.两个软件可编程端口22.总线使能线将总线输入和输出线路切换为3态模式三、快速参考数据表1.快速参考数据V CCA=V CC（VCO）=V CCD;AC值以RMS给出;对于V RF，给出了EMF值;除非另有规定。

IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1998, Texas Instruments IncorporatedThis datasheet has been download from: Datasheets for electronics components.。

集成电路英文代码及中文对照（一）我的文摘2009-11-21 11:32:53 阅读111 评论0 字号：大中小订阅产品名称型号规格性能说明LMLM24J 四运放(军用级)LM148J 通用四运放LM1875T 无线电控制/接收器LM224J 四运放(工业级)LM258N 分离式双电源双运放LM2901N 四电压比较器LM2904N 四运放LM301AN 通用运算放大器LM308N 单比较器LM311P 单比较器LM317L 可调三端稳压器/100mALM317T 可调三端稳压器/1.5ALM317K 可调三端稳压器/3ALM318 高速宽带运放LM324K 通用四运放LM331N V-F/F-V转换器LM336-2.5V 基准电压电路LM336 5V 基准电压电路LM337T 基准电压电路1ALM338K 可调三端稳压器5ALM339N 四比较器LM348N 四741运放LM358N 低功耗双运放LM361N 高速差动比较器LM386N 声频功率放大器LM3914N 十段点线显示驱动LM393N 低功耗低失调双比较器LM399H 精密基准源(6.9)LM723CN 可调正式负稳压器LM733CN 视频放大器LM741J 单运放LM741CN 双运放NENE521 高速双差分比较器NE5532 双运放NE5534 双运放NE555N 单运放NE555J 时基电路军品极NE556 双级型双时基电路NE564 锁相环NE565 锁相环NE567 音调译码器NE592 视频放大器OPOP07 低噪声运放OP27 超低噪声精密运放OP37 超低噪声精密运放光电耦合4N25 晶体管输出4N25MC 晶体管输出4N26 晶体管输出4N27 晶体管输出4N28 晶体管输出4N29 达林顿输出4N30 达林顿输出4N31 达林顿输出4N32 达林顿输出4N33 达林顿输出4N33MC 达林顿输出4N35 达林顿输出4N36 晶体管输出4N37 晶体管输出4N38 晶体管输出4N39 可控硅输出6N135 高速光耦晶体管输出6N136 高速光耦晶体管输出6N137 高速光耦晶体管输出6N138 达林顿输出6N139 达林顿输出MOC3020 可控硅驱动输出MOC3021 可控硅驱动输出MOC3023 可控硅驱动输出MOC3030 可控硅驱动输出MOC3040 过零触发可控硅输出MOC3041 过零触发可控硅输出MOC3061 过零触发可控硅输出MOC3081 过零触发可控硅输出TLP521-1 单光耦TLP521-2 双光耦TLP521-4 四光耦TLP621 四光耦TIL113 达林顿输出TIL117 TLL逻辑输出PC814 单光耦PC817 单光耦H11A2 晶体管输出H11D1 高压晶体管输出H11G2 电阻达林顿输出LFLF347N 宽带JFET输入四运放LF351N 宽带JFET输入运放LF353N JFET输入宽带运放LF355N JFET输入运放LF357N JFET宽带非全裣运放LF398N 采样/保持电路LF412N 低偏差飘移输入运放MCMC1377 彩色电视编码器MC1403 精密电压基准源(2.5)MC1413 周边七段驱动阵列MC1416 周边七段驱动陈列MC14409 二进制脉冲拨号器MC14433 3位半A/D转换器MC14489 多字符LED显示驱动器MC145026 编码器VD5026 编码器MC145027 译码器VD5027 译码器MC145028 译码器MC145030 编码译码器MC145106 频率合成器MC145146 4位数据总线TLTL062 低功耗JEFT输入双运放TL072 低噪声JEFTTL082TL084TL431TL494ULNULN2003 周边七段驱动陈列ULN2004 周边七段驱动陈列ULN2803 周边八段驱动陈列ULN2804 周边八段驱动陈列ICLICL7106 3位ADC/驱动LCDICL7107 3位半ADC/驱动LEDICL7109 4位半ADC/驱动LEDICL7129 4位半ADC/LCD驱动ICL7135 ADC/LCD驱动BCD输出ICL7136 3位半CMOSADC/LCD驱动ICL7218 CMOS低功耗运算放大器ICL7650 整零运放斩波ICL7652 整零运放斩波ICL7660 CMOS直流-直流转换器ICL8038 函数信号发生器ICL8049 反对数放大器CACA3140 单BIMOS运行CA3240 单BIMOS运行UCUC3842 WM电流型控制器UC3845 PWM电流型控制器DSDS12887 非易失实时时钟芯片L3845 中继接口电路SGSG3524 PWM解调调制器SG3525 PWM解调调制器20106 前置放大器MTMT8814 8x12模拟交换矩阵MT8816 8x模拟交换矩阵MT8870 综合DTMF接收器MT8870 综合DTMF接收器MT8880 综合DTMF发生接收器MIC24LC01 128x8串行EEPROM24LC02 256x8串行EEPROM24LC04 512x8串行EEPROM24LC16 2Kx8串行EEPROM93LC46 64x16串行EEPROM93LC56 256x16串行EEPROM93LC66 512x8 256x16 EEPROMPIC16C52 384x12 单片机PIC16C54 512x12 单片机PCI16C56 512x12 单片机PIC16C57 2048x12 单片机ATAT24C01 128x8串行EEPROMAT24C02 256x8串行EEPROMAT24C04 512x8串行EEPROMAT24C16 2Kx8串行EEPROMAT93C46 64x16串行EEPROMAT93C56 256x16串行EEPROMATF16V8 FLASH200门ATF20V8 FLASH300门高速ATF22V10 FLASH500门高速低电流AT28C16 2Kx8CMOS并行EEPROMAT28C17 2Kx8CMOS并行EEPROMAT28C64 8Kx8并行EEPROMAT28C256 32Kx8并行EEPROMAT28F010 128Kx8并行EEPROMA29C040 512Kx8 FLASH EEPROMHM6116 2Kx8 CMOS 静态PAMHY6264 8Kx8 CMOS 静态RAMHM6264 8Kx8 CMOS 静态RAMIS62C64 8Kx8 高速CMOS 静态RAMHY62256 32Kx8 CMOS 静态RAMHM62256 32Kx8 CMOS 静态RAMHM628128 128Kx8 CMOS 静态RAMHM628256 256Kx8 CMOS 静态RAMHM628512 512Kx8 CMOS 静态RAMHM628512 512Kx8 CMOS 静态RAM TCMTCM5087 双音调发生器MM5832 实时钟电路TCTC14433 3位半A/D转换器TC232 并行/串行接口电路TC7106 3位半ADC/LCD驱动TC7107 3位半ADC/LED驱动TC7116 3位半ADC/LCD驱动带保TC7129 4位半ADC/LCDTC7135 4位半ADC/LCD，BCD输出TC7650 整零运放斩波7575107 四差分线驱动器75174 四差分线驱动器75175 三态四差分接收器75176 差分总线接收器75188 四线驱动器75189 四线驱动器75451 双外围驱动器75452 双外围驱动器集成电路英文代码及中文对照（二）我的文摘2009-11-21 11:37:11 阅读191 评论0 字号：大中小订阅。

T rouble-free design, easy operationThe Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets.To switch the flow from one basket to the other, the oper-ating handle moves through a 90-degree arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no toolsrequired. Positioning the plug each time in exactly the right spot happens automatically by integral stops.Before operating the handle, a specially designed, manual lifting jack built into thestrainer, lifts the diverter plugoff its seat. After theswitching operation, the jack easily reseats the plug, even under high pressures.Because a built-in stop limits the distance the diverter plug rises, it minimizes the possi-bility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it diffi-cult to reseat.Other features• A quick, easy to open, swing-away yoke design cover goes back on just as fast as it came off • Standard NPT drain taps simplify the draining of the basket chamber • All sizes come withmounting legs for bolting the strainer to the floor for a rock solid installationFeatures• Continuous flow, no shutdown for basket cleaning • Rugged tapered plug design • Lift jack prevents galling of the plug • Quick open cover—no tools needed • Large capacity baskets • Threaded drain • Machined basket seat• Perforated or mesh 316 stainless steel basketOptions• Ductile iron construction• Basket perforations from 1/32" to 1/2"• Basket mesh from 20 to 400• MONEL ® baskets • Vent valves • Drain valves• Gauge/vent taps - 1/4" NPT • Magnetic basket inserts• Pressure differential gauge and switch connections • Viton ®, PTFE encapsulated or EPDM seals • Cast iron and stainless steel diverter plug• Sizes 5", 6", 8"• I ron, bronze, carbon steel or stainless steel• FlangedMONEL ® is a registered trademark of Special Metals Corporation group of Companies. Viton ® is a registered trademark of The Chemours Company FC, LLC.C a s t C o n s t r u c t i o nP e r m a n e M e d i aPlug T ype Duplex Basket StrainerSelection chart 5", 6", 8" Iron Bronze Flanged 125# Buna-N ®Flow rate (water) [GPM]P r e s s u r e d r o p [k P a ]5"Bronze 457229********* 8451,04110437132481876"Carbon steel 559327298502470 8891,0671052716318263Stainless steel 559327298502470 8891,0671052716318279Cast iron 559327298502495 9211,0671052716318227Bronze 546273298502384 8701,06710540162862648"Carbon steel 635356–711570 1,2701,4221578122432730Stainless steel 635356–711570 1,2701,4221578122432757Cast iron 635356–711586 1,2861,4221578124432682Bronze635356–7115861,2861,4221578124432782For more information, please email us at ********************or visit /filtration© 2023 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.North America 44 Apple StreetTinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700Europe/Africa/Middle East Auf der Heide 253947 Nettersheim, Germany Tel: +49 2486 809-0Friedensstraße 4168804 Altlußheim, Germany Tel: +49 6205 2094-0An den Nahewiesen 2455450 Langenlonsheim, Germany Tel: +49 6704 204-0Greater China No. 7, Lane 280, Linhong RoadChangning District, 200335 Shanghai, P .R. China Tel: +86 21 2899-3687Asia-Pacific100G Pasir Panjang Road #07-08 Interlocal Centre Singapore 118523Tel: +65 6825-1620ENEF -SSEA-1210-2023Partial cutaway of Model 50 duplex strainer clearly illustrates all major parts—and gives a clear indication of the simplicity of design and ease of maintenance.plugJack。

PACKAGING INFORMATIONOrderableDeviceStatus (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)81023012A OBSOLETE LCCC FK 20TBD Call TI Call TI81023022A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type8102302HA ACTIVE CFP U 101TBD A42N /A for Pkg Type 8102302PA ACTIVE CDIP JG 81TBD A42N /A for Pkg Type 81023032A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type8102303CA ACTIVE CDIP J 141TBD A42N /A for Pkg Type 8102303DA ACTIVE CFP W 141TBD A42N /A for Pkg Type TL061ACD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061ACP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061ACPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061BCD OBSOLETE SOIC D 8TBD Call TI Call TITL061BCP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061BCPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061CD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061CPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL061CPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL061CPSRE4ACTIVESOPS82000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIMPACKAGE OPTION ADDENDUM11-Nov-2009Addendum-Page 1Orderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)TL061CPSRG4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061CPWLE OBSOLETE TSSOP PW8TBD Call TI Call TI TL061ID ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL061IP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL061IPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg Type TL061MJG OBSOLETE CDIP JG8TBD Call TI Call TITL061MJGB OBSOLETE CDIP JG8TBD Call TI Call TITL062ACD ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL062ACJG OBSOLETE CDIP JG8TBD Call TI Call TITL062ACP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062ACPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062ACPSR ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACPSRE4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ACPSRG4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCD ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCDR ACTIVE SOIC D82500Green(RoHS&CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)TL062BCDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062BCP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062BCPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062CD ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL062CJG OBSOLETE CDIP JG8TBD Call TI Call TITL062CP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062CPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg Type TL062CPSLE OBSOLETE SO PS8TBD Call TI Call TITL062CPSR ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPSRE4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPSRG4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPW ACTIVE TSSOP PW8150Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPWE4ACTIVE TSSOP PW8150Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPWG4ACTIVE TSSOP PW8150Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL062CPWLE OBSOLETE TSSOP PW8TBD Call TI Call TITL062CPWR ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPWRE4ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062CPWRG4ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062ID ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IDG4ACTIVE SOIC D875Green(RoHS&CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)TL062IDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL062IJG OBSOLETE CDIP JG8TBD Call TI Call TITL062IP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062IPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL062IPWR ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IPWRE4ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL062IPWRG4ACTIVE TSSOP PW82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL062MFKB ACTIVE LCCC FK201TBD POST-PLATE N/A for Pkg Type TL062MJG ACTIVE CDIP JG81TBD A42N/A for Pkg Type TL062MJGB ACTIVE CDIP JG81TBD A42N/A for Pkg Type TL064ACD ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ACN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064ACNE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064BCD ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064BCN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)TL064BCNE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064CD ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDBR ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDBRE4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDBRG4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064CNE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064CNSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CNSRE4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CNSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CPW ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CPWE4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CPWG4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL064CPWLE OBSOLETE TSSOP PW14TBD Call TI Call TITL064CPWR ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CPWRE4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064CPWRG4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064ID ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064IDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064IDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064IDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)TL064IDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064IDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064IN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064INE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL064INS ACTIVE SO NS1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064INSG4ACTIVE SO NS1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064INSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL064INSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL064MFK ACTIVE LCCC FK201TBD POST-PLATE N/A for Pkg Type TL064MFKB ACTIVE LCCC FK201TBD POST-PLATE N/A for Pkg TypeTL064MJ ACTIVE CDIP J141TBD A42N/A for Pkg TypeTL064MJB ACTIVE CDIP J141TBD A42N/A for Pkg Type TL064MWB ACTIVE CFP W141TBD A42N/A for Pkg Type (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominal Device Package Type Package DrawingPinsSPQ Reel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant TL061ACDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL061CDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL061CDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL061CPSR SOPS 82000330.016.48.2 6.6 2.512.016.0Q1TL061IDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL061IDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062ACDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062ACPSR SOPS 82000330.016.48.2 6.6 2.512.016.0Q1TL062BCDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062CDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062CDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062CPSR SOPS 82000330.016.48.2 6.6 2.512.016.0Q1TL062CPWR TSSOPPW 82000330.012.47.0 3.6 1.68.012.0Q1TL062IDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062IDR SOICD 82500330.012.4 6.4 5.2 2.18.012.0Q1TL062IPWR TSSOPPW 82000330.012.47.0 3.6 1.68.012.0Q1TL064ACDR SOICD 142500330.016.4 6.59.0 2.18.016.0Q1TL064BCDR SOIC D 142500330.016.4 6.59.0 2.18.016.0Q1Device PackageType PackageDrawingPins SPQ ReelDiameter(mm)ReelWidthW1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W(mm)Pin1QuadrantTL064CDBR SSOP DB142000330.016.48.2 6.6 2.512.016.0Q1 TL064CDR SOIC D142500330.016.4 6.59.0 2.18.016.0Q1 TL064CNSR SO NS142000330.016.48.210.5 2.512.016.0Q1 TL064CPWR TSSOP PW142000330.012.47.0 5.6 1.68.012.0Q1 TL064IDR SOIC D142500330.016.4 6.59.0 2.18.016.0Q1 TL064INSR SO NS142000330.016.48.210.5 2.512.016.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) TL061ACDR SOIC D8*******.5338.120.6 TL061CDR SOIC D8*******.5338.120.6 TL061CDR SOIC D8*******.0346.029.0 TL061CPSR SO PS82000346.0346.033.0 TL061IDR SOIC D8*******.5338.120.6 TL061IDR SOIC D8*******.0346.029.0 TL062ACDR SOIC D8*******.5338.120.6 TL062ACPSR SO PS82000346.0346.033.0 TL062BCDR SOIC D8*******.5338.120.6 TL062CDR SOIC D8*******.5338.120.6 TL062CDR SOIC D8*******.0346.029.0Device Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) TL062CPSR SO PS82000346.0346.033.0TL062CPWR TSSOP PW82000346.0346.029.0TL062IDR SOIC D8*******.5338.120.6TL062IDR SOIC D8*******.0346.029.0TL062IPWR TSSOP PW82000346.0346.029.0TL064ACDR SOIC D142500346.0346.033.0TL064BCDR SOIC D142500346.0346.033.0TL064CDBR SSOP DB142000346.0346.033.0TL064CDR SOIC D142500346.0346.033.0TL064CNSR SO NS142000346.0346.033.0TL064CPWR TSSOP PW142000346.0346.029.0TL064IDR SOIC D142500346.0346.033.0TL064INSR SO NS142000346.0346.033.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDLP®Products Communications and /communicationsTelecomDSP Computers and /computersPeripheralsClocks and Timers /clocks Consumer Electronics /consumer-appsInterface Energy /energyLogic Industrial /industrialPower Mgmt Medical /medicalMicrocontrollers Security /securityRFID Space,Avionics&/space-avionics-defenseDefenseRF/IF and ZigBee®Solutions /lprf Video and Imaging /videoWireless /wireless-appsMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2010,Texas Instruments Incorporated。

NL27WZ07Dual Buffer with Open Drain OutputsThe NL27WZ07 is a high performance dual buffer with open drain outputs operating from a 1.65 to 5.5 V supply.The internal circuit is composed of multiple stages, including an open drain output which provides the capability to set output switching level.This allows the NL27WZ07 to be used to interface 5 V circuits to circuits of any voltage between V CC and 7 V using an external resistor and power supply.Features•Extremely High Speed: t PD 2.3 ns (typical) at V CC = 5 V•Designed for 1.65 V to 5.5 V V CC Operation, CMOS compatible •Over V oltage Tolerant Inputs•LVTTL Compatible − Interface Capability with 5 V TTL Logic with V CC = 3 V•LVCMOS Compatible•24 mA Output Sink Capability•Near Zero Static Supply Current Substantially Reduces System Power Requirements•Chip Complexity: FET = 72; Equivalent Gate = 18•Pb−Free Packages are AvailableIN A2OUT Y2Figure 1. Pinout (Top View)Figure 2. Logic SymbolOUT Y1IN A1V CCIN A1OUT Y1GND IN A2OUT Y2See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.ORDERING INFORMATIONMARKINGDIAGRAMSSC−88DF SUFFIX CASE 419BTSOP−6DT SUFFIX CASE 318GPIN ASSIGNMENT123INA2IN A1GND 45V CC OUT Y2OUT Y16FUNCTION TABLEL HA Input Y Output L Z16M7 M G G 1M7= Device Code M = Date Code*G = Pb−Free Package(Note: Microdot may be in either location)*Date Code orientation and/or position may vary depending upon manufacturing location.M7 M G G MMAXIMUM RATINGSSymbol Characteristics Value Unit V CC DC Supply Voltage*0.5 to )7.0V V I DC Input Voltage*0.5 ≤ V I≤)7.0V V O DC Output Voltage Output in Z or LOW State (Note 1)*0.5 ≤ V O≤ 7.0VI IK DC Input Diode Current V I < GND*50mAI OK DC Output Diode Current V O < GND*50mAI O DC Output Sink Current$50mAI CC DC Supply Current per Supply Pin$100mAI GND DC Ground Current per Ground Pin$100mAT STG Storage Temperature Range*65 to )150°C P D Power Dissipation in Still Air SC−88, TSOP−6200mW q JA Thermal Resistance SC−88, TSOP−6333°C/W T L Lead Temperature, 1 mm from case for 10 s260°C T J Junction Temperature under Bias)150°C I Latchup Latchup Performance Above V CC and Below GND at 85°C (Note 5)$500mAMSL Moisture Sensitivity Level 1F R Flammability Rating Oxygen Index: 28 to 34UL 94 V−0 @ 0.125 inV ESD ESD Classification Human Body Model (Note 3)Machine Model (Note 4)Charged Device Model (Note 5)> 2000 > 200 N/AStresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.1.I O absolute maximum rating must be observed.2.Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B.3.Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A.4.Tested to JESD22−C101−A5.Tested to EIA/JESD78RECOMMENDED OPERATING CONDITIONSSymbol Parameter Min Max UnitV CC Supply Voltage OperatingData Retention Only 1.651.55.55.5VV I Input Voltage0 5.5V V O Output Voltage(Z or LOW State)0 5.5V T A Operating Free−Air Temperature*40)85°CD t/D V Input Transition Rise or Fall Rate V CC = 2.5 V $0.2 VV CC =3.0 V $0.3 VV CC =5.0 V $0.5 V 020105ns/VDC ELECTRICAL CHARACTERISTICSSymbol ParameterConditionV CC (V)T A = 25°C *40°C ≤T A ≤ 85°C Unit Min TypMaxMin MaxV IH High−Level Input Voltage 1.65 to 1.952.3 to 5.50.75 V CC 0.75 V CC0.75 V CC 0.75 V CCV V IL Low−Level Input Voltage 1.65 to 1.952.3 to 5.50.3 V CC 0.3 V CC 0.3 V CC 0.3 V CC V I LKG Z−State Output Leakage CurrentV IN = V ILV OUT = V CC or GND2.3 to 5.5$5.0$10.0m A V OLLow−Level Output Voltage V IN = V ILI OL = 100 m A 1.65 to 5.50.00.10.1VI OL = 4 mA 1.650.080.240.24I OL = 8 mA 2.30.200.30.3I OL = 12 mA 2.70.220.40.4I OL = 16 mA 3.00.280.40.4I OL = 24 mA 3.00.380.550.55I OL = 32 mA4.50.420.550.55I IN Input Leakage Current V IN or V OUT = V CC orGND0 to 5.5$0.1$1.0m A I OFF Power Off−Output Leakage Current V OUT = 5.5 V 0110m A I CCQuiescent Supply CurrentV IN = V CC or GND5.5110m AAC ELECTRICAL CHARACTERISTICS t R = t F = 2.5 ns; C L = 50 pF; R L = 500 WSymbol ParameterConditionV CC (V)T A = 25°C *40°C ≤T A ≤ 85°C Unit Min Typ Max Min Maxt PZLPropagation Delay(Figure 3 and 4)R L = R 1= 5000 W, C L = 15 pF1.8 $0.15 1.8 5.311.5 1.812.0nsR L = R 1= 500 W, C L = 50 pF2.5 $0.2 1.23.7 5.8 1.2 6.43.3 $0.30.8 2.94.40.8 4.85.0 $0.50.5 2.3 3.50.5 3.9t PLZPropagation Delay(Figure 3 and 4)R L = R 1= 5000 W, C L = 15 pF1.8 $0.15 1.8 5.311.5 1.812.0nsR L = R 1= 500 W, C L = 50 pF2.5 $0.2 1.2 2.8 5.8 1.2 6.43.3 $0.30.8 2.14.40.8 4.85.0 $0.50.51.43.50.53.9CAPACITIVE CHARACTERISTICSSymbol ParameterConditionTypical Unit C IN Input Capacitance V CC = 5.5 V, V I = 0 V or V CC 2.5pF C OUT Output CapacitanceV CC = 5.5 V, V I = 0 V or V CC 4.0pF C PDPower Dissipation Capacitance (Note 6)10 MHz, V CC = 5.5 V, V I = 0 V or V CC4.0pF6.C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.Average operating current can be obtained by the equation: I CC(OPR ) = C PD V CC f in ) I CC . C PD is used to determine the no−load dynamic power consumption; P D = C PD V CC 2 f in ) I CC V CC .Figure 3. Switching WaveformsV R T = Z OUT of pulse generator (typically 50 W )Figure 4. Test CircuitV CCGNDHIGHIMPEDANCE0.3 VAYCC 2ORDERING INFORMATIONDevicePackageShipping †NL27WZ07DFT2SC−88 / SOT−363 / SC−703000/T ape & ReelNL27WZ07DFT2G SC−88 / SOT−363 / SC−70(Pb−Free)NL27WZ07DTT1TSOP−6 / SOT−23 / SC−59NL27WZ07DTT1GTSOP−6 / SOT−23 / SC−59(Pb−Free)†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: INCH.3.419B−01 OBSOLETE, NEW STANDARD 419B−02.SC−88/SC70−6/SOT−363CASE 419B−02ISSUE WDIM MIN NOM MAX MILLIMETERS A 0.800.95 1.10A10.000.050.10A3b 0.100.210.30C 0.100.140.25D 1.80 2.00 2.200.0310.0370.0430.0000.0020.0040.0040.0080.0120.0040.0050.0100.0700.0780.086MINNOM MAX INCHES0.20 REF 0.008 REFH EE 1.15 1.25 1.35e 0.65 BSC L 0.100.200.302.00 2.10 2.200.0450.0490.0530.026 BSC0.0040.0080.0120.0780.0820.086*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*TSOP−6CASE 318G−02ISSUE SNOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEADTHICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*DIM A MIN NOM MAX MIN MILLIMETERS0.90 1.00 1.100.035INCHESA10.010.060.100.001b 0.250.380.500.010c 0.100.180.260.004D 2.90 3.00 3.100.114E 1.30 1.50 1.700.051e 0.850.95 1.050.034L 0.200.400.600.0080.0390.0430.0020.0040.0140.0200.0070.0100.1180.1220.0590.0670.0370.0410.0160.024NOM MAX 2.50 2.75 3.000.0990.1080.118H E −−0°10°0°10°qON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。

<BR>HYDRAULICS GROUP PRODUCTINFORMATION FORM<BR>Subject : Replacement and Mounting Kits Frame Size 4-Series PVplus-UKIssue Number Owner Created By Date of Issue DocumentNumberStefan Schindler/COR/PARKER Stefan Schindler/COR/PARKER11/07/2002SSCR-5FNJ22 1.0Main BodyThis document contains the following information:Exploded view Frame Size 4zSeal Kits "SK"zReplacement Kits "RK"zMounting Kits "MK"zall design changeszPVI-BG4-GB-42-sw.pdf PVI-BG4-GB-41-sw.pdf PVI-BG4-GB-40-sw.pdfPVI-BG4-DE-42-sw.pdf PVI-BG4-DE-41-sw.pdf PVI-BG4-DE-40-sw.pdfExploded view, PV, frame size 4, PV140 - PV180correlation between position numbers and replacement kitspos. No.description page replacement kit 1, 2pump body, end cover--3swash plate, finished6swashplate kit4body seal4seal kit5cradle--6trunnion bearing, HX6trunnion bearing kit7spring washer, servo spring8servo spring kit8servo spring8servo spring kit9connector servo spring6swashplate kit10servo spring plug8servo spring kit11swash plate connector6swashplate kit13tapered / contour sleeve8tapered / contour sleeve 14shaft7shaft unit15piston and slipper, crimped6rotating group, set of pistons 16cylinder block6rotating group17retainer spring, cylinder block6rotating group18pilot cover--20distance washer6rotating group21slipper retainer6rotating group22retainer segment6rotating group23valve plate6valve plate26servo piston sleeve7servo piston sleeve27servo piston7servo piston kit28servo piston cover8displacement adjuster kit 29set screw8displacement limiter kit 30thru drive adaptor10mounting kit, thru drive 31thru drive cover--32air bleed valve8air bleed valve35, 36rotation indicator, name plate--37key7shaft unit38snap ring for shaft7shaft unit39snap ring for bore6rotating group41hexagon socket head cap screw, retainer6rotating group42hexagon socket head cap screw, body6connecting bolt kit43hexagon socket head cap screw, pilot6connecting bolt kit44rivet--45guide pin, servo spring8servo spring kit46locator pin cradle--47locator pin, valve plate6valve plate48locator pin, body6connecting bolt kit50washer, servo piston7servo piston kit51, 56washer, cylinder block6rotating group52washer, shaft7shaft unit53, 54magnet cover for ports, thru drive--55protection plug, drain port--57roller bearing, rear7shaft unit58plug, compensator interface4seal kit59plug, feedback4seal kit60chain link6swashplate kit62roller bearing, front7shaft unit63 - 71o-ring4seal kit72shaft seal4seal kit73self sealing lock nut4, 8seal kit, displacement limiter 75 - 77, 78backup rings, retainer for shaft seal4seal kit79 - 81pipe plug4seal kit82hexagon socket countersunk head cap screw6trunnion bearing kit83hexagon socket head cap screw, cradle--84o-ring4seal kit85hexagon socket head cap screw, thru drive10mounting kit, thru drive 87locator pin, thru drive adaptor10mounting kit, thru drive 90o-ring4seal kit91coupling9mounting kit, coupling 92adaptor for keyed shaft9mounting kit, couplingSK-Seal kitPVBG4PV series, frame size 4, PV140 - PV180N Seals NBRV Seals FPME Seals EPRP Seals FPM, shaft seal PTFE (for case pressure)W Seals NBR, shaft seal PTFE (for water glycole)1Threads: metric, ports: BSPP3Threads: UNC, ports: UNF7Threads: metric, ports: ISO 61498Threads: UNC, ports: ISO 614942Design series 42includes:41body seal, frame size 4581pipe plug VSTI-10x1-OR-A3C ISO 6149 NBR seals NBR 58(1)pipe plug VSTI-10x1-OR-A3C ISO 6149 FPM seals FPM 58(1)pipe plug VSTI-10x1-OR-A3C, ISO 6149 EPR seals EPR 591pipe plug M 27 x 2 ISO 6149, NBR seals NBR 59(1)pipe plug M 27 x 2 ISO 6149, FPM seals FPM 59(1)pipe plug M 27 x 2 ISO 6149, EPR seals EPR 632o-ring 2-010-N552-90; 6,07 x 1,78seals NBR 63(2)o-ring 2-010-V747-75; 6,07 x 1,78seals FPM 63(2)o-ring 2-010-E540-80; 6,07 x 1,78seals EPR 651o-ring 2-136-N552-90; 50,47 x 2,62seals NBR 65(1)o-ring 2-136-V747-75; 50,47 x 2,62seals FPM 65(1)o-ring 2-136-E540-80; 50,47 x 2,62seals EPR 661o-ring 2-036-N552-90; 60,05 x 1,78seals NBR 66(1)o-ring 2-036-V747-75; 60,05 x 1,78seals FPM 66(1)o-ring 2-036-E540-80; 60,05 x 1,78seals EPR 671o-ring 2-157-N552-90; 113,97 x 2,62seals NBR 67(1)o-ring 2-157-V747-75; 113,97 x 2,62seals FPM 67(1)o-ring 2-157-E540-80; 113,97 x 2,62seals EPR 681o-ring 2-140-N552-90; 56,82 x 2,62seals NBR 68(1)o-ring 2-140-V747-75; 56,82 x 2,62seals FPM 68(1)o-ring 2-140-E540-80; 56,82 x 2,62seals EPR 691o-ring 2-153-N552-90; 88,57 x 2,62seals NBR 69(1)o-ring 2-153-V747-75; 88,57 x 2,62seals FPM 69(1)o-ring 2-153-E540-80; 88,57 x 2,62seals EPR 701o-ring 2-145-N552-90; 64,77 x 2,62seals NBR 70(1)o-ring 2-145-V747-75; 64,77 x 2,62seals FPM 70(1)o-ring 2-145-E540-80; 64,77 x 2,62seals EPR 711o-ring 2-035-N552-90; 56,87 x 1,78seals NBR 71(1)o-ring 2-035-V747-75; 56,87 x 1,78seals FPM 71(1)o-ring 2-035-E540-80; 56,87 x 1,78seals EPR 721shaft seal BABSL 0,5 60 x 80 x 7-NBR seals NBR 72(1)shaft seal BABSL 0,5 60 x 80 x 7-FPM seals FPM 72(1)shaft seal PTFE, frame size 4 with EPR o-ring seals EPR, S 72(1)shaft seal PTFE, frame size 4seals P, W 731self sealing nut M 14 x 1,5; SEAL LOCK751back up ring 8-136-N300-90; 51,26 x 2,18seals NBR 75(1)back up ring 8-136-V709-90; 51,26 x 2,18seals FPM 75(1)back up ring 8-136-E652-90; 51,26 x 2,18seals EPR 761back up ring 8-035-N300-90; 57,61 x 1,35seals NBR 76(1)back up ring 8-035-V709-90; 57,61 x 1,35seals FPM 76(1)back up ring 8-035-E652-90; 57,61 x 1,35seals EPR 771back up ring 8-036-N300-90; 60,78 x 1,35seals NBR77(1)back up ring 8-036-V709-90; 60,78 x 1,35seals FPM77(1)back up ring 8-036-E652-90; 60,78 x 1,35seals EPR781J82 x 2,5 DIN 472, retainer for shaft seal791pipe plug VSTI R3/4" ED NBR NBR, thread 1 79(1)pipe plug VSTI R3/4" ED FPM FPM, thread 1 79(1)pipe plug VSTI R3/4" ED EPR EPR, thread 1 79(1)pipe plug 12HP50NS-NBR, 1 1/16-12 UNF NBR, thread 3 79(1)pipe plug 12HP50NS-FPM, 1 1/16-12 UNF FPM, thread 3 79(1)pipe plug 12HP50NS-EPR, 1 1/16-12 UNF EPR, thread 3 79(1)pipe plug VSTI-27 x 2-OR-A3C ISO 6149 NBR NBR, thread 7, 8 79(1)pipe plug VSTI-27 x 2-OR-A3C ISO 6149 FPM FPM, thread 7, 8 79(1)pipe plug VSTI-27 x 2-OR-A3C ISO 6149 EPR EPR, thread 7, 8 801pipe plug VSTI R1/4" ED NBR NBR, thread 1 80(1)pipe plug VSTI R1/4" ED FPM FPM, thread 1 80(1)pipe plug VSTI R1/4" ED EPR EPR, thread 1 80(1)pipe plug 4HP50NS-NBR, 7/16-20 UNF NBR, thread 3 80(1)pipe plug 4HP50NS-FPM, 7/16-20 UNF FPM, thread 3 80(1)pipe plug 4HP50NS-EPR, 7/16-20 UNF EPR, thread 3 80(1)pipe plug VSTI-12 x 1,5-OR-A3C ISO 6149 NBR NBR, thread 7, 8 80(1)pipe plug VSTI-12 x 1,5-OR-A3C ISO 6149 FPM FPM, thread 7, 8 80(1)pipe plug VSTI-12 x 1,5-OR-A3C ISO 6149 EPR EPR, thread 7, 8 811pipe plug VSTI R1" ED NBR NBR, thread 1 81(1)pipe plug VSTI R1" ED FPM FPM, thread 1 81(1)pipe plug VSTI R1" ED EPR EPR, thread 1 81(1)pipe plug 16HP50NS-NBR, 1 5/16-12 UNF NBR, thread 3 81(1)pipe plug 16HP50NS-FPM, 1 5/16-12 UNF FPM, thread 3 81(1)pipe plug 16HP50NS-EPR, 1 5/16-12 UNF EPR, thread 3 81(1)pipe plug VSTI-33 x 2-OR-A3C ISO 6149 NBR NBR, thread 7, 8 81(1)pipe plug VSTI-33 x 2-OR-A3C ISO 6149 FPM FPM, thread 7, 8 81(1)pipe plug VSTI-33 x 2-OR-A3C ISO 6149 EPR EPR, thread 7, 8 841o-ring 2-164-N552-90; 158,42 x 2,62seals NBR84(1)o-ring 2-164-V747-75; 158,42 x 2,62seals FPM84(1)o-ring 2-164-E540-80; 158,42 x 2,62seals EPR841o-ring 2-163-N552-90; 152,07 x 2,62seals NBR84(1)o-ring 2-163-V747-75; 152,07 x 2,62seals FPM84(1)o-ring 2-163-E540-80; 152,07 x 2,62seals EPR841o-ring 2-048-N552-90; 120,37 x 1,78seals NBR84(1)o-ring 2-048-V747-75; 120,37 x 1,78seals FPM84(1)o-ring 2-048-E540-80; 120,37 x 1,78seals EPR841o-ring 2-044-N552-90; 94,97 x 1,78seals NBR84(1)o-ring 2-044-V747-75; 94,97 x 1,78seals FPM84(1)o-ring 2-044-E540-80; 94,97 x 1,78seals EPR841o-ring 2-042-N552-90; 82,27 x 1,78seals NBR84(1)o-ring 2-042-V747-75; 82,27 x 1,78seals FPM84(1)o-ring 2-042-E540-80; 82,27 x 1,78seals EPR841o-ring 2-041-N552-90; 75,92 x 1,78seals NBR84(1)o-ring 2-041-V747-75; 75,92 x 1,78seals FPM84(1)o-ring 2-041-E540-80; 75,92 x 1,78seals EPR901o-ring 2-012-N552-90; 9,25 x 1,78seals NBR90(1)o-ring 2-012-V747-75; 9,25 x 1,78seals FPM90(1)o-ring 2-012-E540-80; 9,25 x 1,78seals EPR2611o-ring 6-346-N552-90; 9,4 x 2,1seals NBR261(1)o-ring 6-346-V747-75; 9,4 x 2,1seals FPM261(1)o-ring 6-346-E540-80; 9,4 x 2,1seals EPRPVBG4PV series, frame size 4, PV140 - PV180VT Connecting bolt kitM Metric versionS SAE/UNC version40Design series 40 - 42includes:424hexagon socket head cap screw M 16 x 75 DIN 912 12.9thread M 42(4)hexagon socket head cap screw 5/8" - 11 UNC x 3", 12.9thread S 434hexagon socket head cap screw M 8 x 20 DIN 912 12.9thread M 43(4)hexagon socket head cap screw Nr. 5/16" - 18 UNC x 3/4", 12.9thread S 482roll pin 8 M6 x 16 DIN 7 St 50KRK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180GLE Trunnion bearing unit40Design series 40 - 42includes:62trunnion bearing segment HX, frame size 4822hexagon socket countersunk head cap screw M 5 x 10 DIN 7991, RK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180ROG Rotating group40Design series 40 - 42includes:159piston and slipper, crimped161cylinder block, bimetal171retainer spring, cylinder block204distance element211slipper retainer plate222retainer segment391snap ring for holes, 60 x 2 DIN 472414hexagon socket head cap screw M 8 x 30 DIN 912 12.9, coated511washer, SS 48 x 60 x 3 DIN 988561washer, 44 x 59 x 3RK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180KOS Piston assembly, set40Design series 40 - 42includes159piston and slipper, crimpedRK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180SS Valve plateR Clockwise rotationL Counter-clockwise rotation40Design series 40 - 42includes:231valve plate, clockwise rotation, frame size 4rotation R 23(1)valve plate, counterclockwise rotation, frame size 4rotation L 471locator pin 6 M6 x 14 DIN 7 StRK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180SRS Swashplate unit41Design series 41includes:31swash plate, finished, frame size 491locator for servo spring, frame size 4111swash plate connector frame size 4601chain link, 596 - 111 DIN 8187PVBG4PV series, frame size 4, PV140 - PV180WP Shaft unit, keyedWZ Shaft unit, splinedWQ Shaft unit, keyed, heavy duty SAE onlyWF Shaft unit, splined, heavy duty SAE onlyM Metric versionS SAE/UNC version40Design series 40 - 42includes:141shaft, keyed, metric, frame size 4keyed, metric14(1)shaft, keyed, SAE, frame size 4, heavy duty keyed, SAE, heavy d. 14(1)shaft, keyed, SAE, frame size 4keyed, SAE14(1)shaft, splined, metric, frame size 4splined, metric14(1)shaft, splined, SAE, frame size 4, heavy duty splined, SAE, heavy 14(1)shaft, splined, SAE, frame size 4splined, SAE371key, 14 x 9 x 75 DIN 6885 St keyed, metric37(1)key, 12,7 x 12,7 x 75,5keyed, SAE, heavy d. 37(1)key, 11,1 x 11,1 x 55keyed, SAE382Snap ring for shaft, 60 x 2 DIN 471522washer, PS 60 x 75 x 2 DIN 988571Roller bearing F 204754, INA621Roller bearing NUP - 2212 - EC,RK-Replacement kitPV140PV series, frame size 4, PV140PV180PV series, frame size 4, PV180HE Stroke limit unit, adjustableN Seals NBRV Seals FPME Seals EPR41Design series 41 - 42includes:281servo piston cover291stroke limiter, M 14 x 1,5, displacement 140 cm³/rev size 14029(1)stroke limiter, M 14 x 1,5, displacement 180 cm³/rev size 180701o-ring 2-145-N552-90; 64,77 x 2,62seals NBR70(1)o-ring 2-145-V747-75; 64,77 x 2,62seals FPM70(1)o-ring 2-145-E540-80; 64,77 x 2,62seals EPR731self sealing lock nut, M 14 x 1,5; SEAL LOCKRK-Replacement kitPVBG4PV series, frame size 4, PV140SKS Servo piston kit42Design series 42includes:271servo piston, frame size 4504washer SS 22 x 32 x 2 DIN 988RK-Replacement kitPVBG4PV series, frame size 4, PV140 - PV180RFS Servo spring unit40Design series 40 - 42includes:71spring washer, servo spring, frame size 481servo spring, frame size 4101servo spring cover, frame size 4451Connex LG 22 x 100, roll pinPVBG4PV series, frame size 4, PV140 - PV180 SB Servo piston sleeve N Seals NBR V Seals FPM E Seals EPR42Design series 40 - 42includes:261servo piston sleeve, frame size 4661o-ring 2-036-N552-90; 60,05 x 1,78seals NBR 66(1)o-ring 2-036-V747-75; 60,05 x 1,78seals FPM 66(1)o-ring 2-036-E540-80; 60,05 x 1,78seals EPR 711o-ring 2-035-N552-90; 56,87 x 1,78seals NBR 71(1)o-ring 2-035-V747-75; 56,87 x 1,78seals FPM 71(1)o-ring 2-035-E540-80; 56,87 x 1,78seals EPR 761back up ring 8-035-N300-90; 57,61 x 1,35seals NBR 76(1)back up ring 8-035-V709-90; 57,61 x 1,35seals FPM 76(1)back up ring 8-035-E652-90; 57,61 x 1,35seals EPR 771back up ring 8-036-N300-90; 60,78 x 1,35seals NBR 77(1)back up ring 8-036-V709-90; 60,78 x 1,35seals FPM 77(1)back up ring 8-036-E652-90; 60,78 x 1,35seals EPR32RK-Replacement kitPV000PV series, alle frame sizen EV Air bleed valve N Seals NBR V Seals FPM E Seals EPR40Design series 40 - 42includes:2601body air bleed valve2611o-ring 6-346-N552-90; 9,4 x 2,1seals NBR 261(1)o-ring 6-346-V747-75; 9,4 x 2,1seals FPM 261(1)o-ring 6-346-E540-80; 9,4 x 2,1seals EPR2621spring air bleed valve2631ball Ø 6,35, tungsten carbide, class G202641roll pin, 2 x 10 DIN 148113RK-Spare parts kitPVBG4PV series, frame size 2, PV032 - PV046 KH Feedback / contour sleeve0Feedback sleeve for standard pumpsK M S T U W Y Z 41Design series 41 - 42includes:131Feedback sleeve frame size 413(1)Contour sleeve frame size 4, 18,5 kW horse power code K 13(1)Contour sleeve frame size 4, 22 kW horse power code M 13(1)Contour sleeve frame size 4, 30 kW horse power code S 13(1)Contour sleeve frame size 4, 37 kW horse power code T 13(1)Contour sleeve frame size 4, 45 kW horse power code U 13(1)Contour sleeve frame size 4, 55 kW horse power code W 13(1)Contour sleeve frame size 4, 75 kW horse power code Y 13(1)Contour sleeve frame size 4, 90 kW horse power code ZContour sleeve for horse power compensated pumps, 18,5 kW Contour sleeve for horse power compensated pumps, 22 kW Contour sleeve for horse power compensated pumps, 30 kW Contour sleeve for horse power compensated pumps, 37 kW Contour sleeve for horse power compensated pumps, 45 kW Contour sleeve for horse power compensated pumps, 55 kW Contour sleeve for horse power compensated pumps, 75 kW Contour sleeve for horse power compensated pumps, 90 kWPos.Qty Ordering code Description Remark MK-Mounting kit: coupling for thru drive pumpPVBG4PV series , frame size 4, PV140 - PV180K01Second pump: metric splined shaft N25 x 1,5 x 15 DIN 5480K02Second pump: metric splined shaft N32 x 1,5 x 20 DIN 5480K03Second pump: metric splined shaft N40 x 1,5 x 25 DIN 5480K04Second pump: metric splined shaft N50 x 2 x 24 DIN 5480K11Second pump: SAE splined shaft 9T16/32DP flat root side fitK12Second pump: SAE splined shaft 11T16/32DP flat root side fitK13Second pump: SAE splined shaft 13T16/32DP flat root side fitK14Second pump: SAE splined shaft 15T16/32DP flat root side fitK15Second pump: SAE splined shaft 14T12/24DP flat root side fitK16Second pump: SAE splined shaft 17T12/24DP flat root side fitK17Second pump: SAE splined shaft 13T8/16DP flat root side fitK18Second pump: SAE splined shaft 15T8/16DP flat root side fitK20Second pump: metric keyed shaft Ø 12 mmK21Second pump: metric keyed shaft Ø 16 mmK22Second pump: metric keyed shaft Ø 18 mm40Design series 40 - 42includes:91(1)coupling, metric, N50 x 2 x 24 DIN 5480shaft K04 91(1)coupling, metric, N40 x 1,5 x 25 DIN 5480shaft K0391(1)coupling, metric, N32 x 1,5 x 20 DIN 5480shaft K02, K20, K21, K2291(1)coupling, metric, N25 x 1,5 x 15 DIN 5480shaft K01 91(1)coupling, SAE, 15T8/16DP, flat root, side fit shaft K18 91(1)coupling, SAE, 13T8/16DP, flat root, side fit shaft K17 91(1)coupling, SAE, 17T12/24DP, flat root, side fit shaft K16 91(1)coupling, SAE, 14T12/24DP, flat root, side fit shaft K15 91(1)coupling, SAE, 15T16/32DP, flat root, side fit shaft K14 91(1)coupling, SAE, 13T16/32DP, flat root, side fit shaft K13 91(1)coupling, SAE, 11T16/32DP, flat root, side fit shaft K12 91(1)coupling, SAE, 9T16/32DP, flat root, side fit shaft K11 92(1)adaptor for keyed shaft Ø 18 (also needed: pos 91, shaft K02)shaft K22 92(1)adaptor for keyed shaft Ø 16 (also needed: pos 91, shaft K02)shaft K21 92(1)adaptor for keyed shaft Ø 12 (also needed: pos 91, shaft K02)shaft K20Pos.Qty Ordering codeDescriptionRemarkMK-Mounting kit: adaptor for thru drive pump PVBG4PV series , frame size 4, PV140 - PV180 A For thru drive pump: SAE A, Ø 82,55 B For thru drive pump: SAE B, Ø 101,6 C For thru drive pump: SAE C, Ø 127 D For thru drive pump: SAE D, Ø 152,4 H For thru drive pump: metric Ø 80 J For thru drive pump: metric Ø 100 K For thru drive pump: metric Ø 125 L For thru drive pump: metric Ø 160 M Metric screws S UNC screws N Seals NBR V Seals FPM E Seals EPR40Design series 40 - 42includes:301thru drive adaptor SAE A, Ø 82,55, metric screws interf. A, screws: M 30(1)thru drive adaptor SAE A, Ø 82,55, UNC screws interf. A, screws: S 30(1)thru drive adaptor SAE B, Ø 101,6, metric screws interf. B, screws: M 30(1)thru drive adaptor SAE B, Ø 101,6, UNC screws interf. B, screws: S 30(1)thru drive adaptor SAE C, Ø 127, metric screws interf. C, screws: M 30(1)thru drive adaptor SAE C, Ø 127, UNC screws interf. C, screws: S 30(1)thru drive adaptor SAE D, Ø 152,4, metric screws interf. D, screws: M 30(1)thru drive adaptor SAE D, Ø 152,4, UNC screws interf. D, screws: S 30(1)thru drive adaptor: metric Ø 80, metric screws interf. H, screws: M 30(1)thru drive adaptor: metric Ø 80, UNC screws interf. H, screws: S 30(1)thru drive adaptor: metric Ø 100, metric screws interf. J, screws: M 30(1)thru drive adaptor: metric Ø 100, UNC screws interf. J, screws: S 30(1)thru drive adaptor: metric Ø 125, metric screws interf. K, screws: M 30(1)thru drive adaptor: metric Ø 125, UNC screws interf. K, screws: S 30(1)thru drive adaptor: metric Ø 160, metric screws interf. L, screws: M 30(1)thru drive adaptor: metric Ø 160, UNC screws interf. L, screws: S 311cover plate, thru driveoption T 691o-ring 2-153-N552-90; 88,57 x 2,62seals NBR 69(1)o-ring 2-153-V747-75; 88,57 x 2,62seals FPM 69(1)o-ring 2-153-E540-80; 88,57 x 2,62seals EPR 841o-ring 2-041-N552-90; 75,92 x 1,78interf. H, NBR 84(1)o-ring 2-041-V747-75; 75,92 x 1,78interf. H, FPM 84(1)o-ring 2-041-E540-80; 75,92 x 1,78interf. H, EPR 841o-ring 2-042-N552-90; 82,27 x 1,78interf. A, NBR 84(1)o-ring 2-042-V747-75; 82,27 x 1,78interf. A, FPM 84(1)o-ring 2-042-E540-80; 82,27 x 1,78interf. A, EPR 841o-ring 2-044-N552-90; 94,97 x 1,78interf. B, J, NBR 84(1)o-ring 2-044-V747-75; 94,97 x 1,78interf. B, J, FPM 84(1)o-ring 2-044-E540-80; 94,97 x 1,78interf. B, J, EPR 841o-ring 2-048-N552-90; 120,37 x 1,78interf. C, K, NBR 84(1)o-ring 2-048-V747-75; 120,37 x 1,78interf. C, K, FPM 84(1)o-ring 2-048-E540-80; 120,37 x 1,78interf. C, K, EPR 84(1)o-ring 2-163-N552-90; 152,07 x 2,62interf. D, NBR 84(1)o-ring 2-163-V747-75; 152,07 x 2,62interf. D, FPM 84(1)o-ring 2-163-E540-80; 152,07 x 2,62interf. D, EPR 84(1)o-ring 2-164-N552-90; 158,42 x 2,62interf. L, NBR 84(1)o-ring 2-164-V747-75; 158,42 x 2,62interf. L, FPM 84(1)o-ring 2-164-E540-80; 158,42 x 2,62interf. L, EPR 854hexagon socket head cap screw M 12 x 30 DIN 912 12.9screws: M 85(4)hexagon socket head cap screw 1/2" - 13 UNC x 1 1/4", 12.9screws: S872locator pin 8 M6 x 16 DIN 7not for option T 972hexagon socket head cap screw, M10 x 20 DIN 912 12.9option T, screws: M 97(2)hexagon socket head cap screw 3/8" - 16 UNC x 3/4", 12.9option T, screws: SScrews, washers etc. needed to fix the second pump to the adaptor are not included in the kit。