150-5R-1B-5.5中文资料

1
AC/L
4,5
2
AC/N
6,7
3
FG
Assignment DC OUTPUT -V DC OUTPUT +V
Block Diagram
I/P
EMI
FILTER
230 115
RECTIFIERS &
FILTER
POWER SWITCH-
ING
RECTIFIERS &
FILTER
fosc : 65KHz
70 (HORIZONTAL)
AMBIENT TEMPERATURE ( )
90
100
110
115
125
132
180
200
220
230
250
264
INPUT VOLTAGE (VAC) 60Hz
File Name:NES-150-SPEC 2007-06-25
LOAD (%) LOAD (%)
File Name:NES-150-SPEC 2007-06-25
元器件交易网
12
9.5
8.2
9
150W Single Output Switching Power Supply
Mechanical Specification

7
3.5
+V ADJ.
4.5
2.0%
1.0%
1.0%
LINE REGULATION Note.4 0.5%
0.5%
0.5%
0.5%
LOAD REGULATION Note.5 2.0%
1.0%
0.5%
0.5%
SETUP, RISE TIME Note.7 800ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load

PR1500Professional Series Two-Way Radio32 ChannelsLarge Raised Channel andOn/Off Volume KnobsEasy to operate with gloves3 Position Concentric Switch Allows customization of radio featuresProgrammableEmergency ButtonAlerts dispatcher in emergencySealed Accessory Connector Backward compatible with existing accessoriesEnhanced Audio Features Noise reduction softwareand Audio Gain Control (CPS programmable) allow audio customizationAdjustable Power LevelsHelp preserve battery life Priority/DynamicPriority Channel Scan Frequently scan higher priority channels. Easily add or delete scan list membersMonitor/Permanent Monitor Allows continuous channel monitoring3 Programmable Side Buttons and Large Textured Push-To-Talk ButtonEasy access to favorite features and good tactile response. Easy to operate when wearing gloves IMPRES™Energy SystemStandard Package includesan IMPRES charging andreconditioning system, a help inautomating battery mainte-nance, optimizing battery cyclelife, and maximizing talktimePR1500Standard Package• IMPRESNiMH 1850 mAh Battery• IMPRESSingle Unit Rapid Charger• VHF or UHF Antenna• 2.25 Inch Belt Clip• Remote SpeakerMicrophone Adapter• Accessory ConnectorDust Cover• User Guide CD• 2-Year Standard WarrantyAdditional FeaturesSend and receive information ina variety of ways:Quik-Call II™and MDC1200 Signaling• Selective Call (Decode)Receive a call froma specific group or individual• Call Alert (Decode)Receive alerts of incomingcalls when a short distancefrom your radioMDC1200 Signaling Only• Push-to-Talk ID (Encode)Identify outgoing calls.• Radio C heck (Decode)Lets others check usersradio status• Emergency (Encode)Alerts dispatcher in urgentsituations• SelectiveRadio Inhibit (Decode)Allows system owner todisable stolen or missingradiosWhen it comes to public safety, a communityshouldn’t settle for “good enough.”keep our community safe and secure. That’s why so much innovation went into designing the PR1500 Professional Series two-way radio from Motorola.rugged and tough. But what really sets this radio apart is how it performs. You’ll notice a rich, full audio that can be customized for your ear as well as the environment. The PR1500 also offers enhanced performance that delivers wide range and improved battery life.P25 Conventional UpgradeableWith a single software upgrade, the PR1500 becomes P25 interoperable. This essential feature gives you the ability to interact with other networksin times of crisis.FACTORY MUTUAL APPROVALSThe PR1500 is Factory Mutual approved and Canadian Standard Association approved as intrinsically safe for use in Classes I, II, and III, Division 1, Groups C, D, E, F and G, as well as non-incendive use in Class I, Division 2, Groups A, B, C and D on models ordered with the Factory Mutual option, and battery.Accelerated Life T estMotorola’s Accelerated Life Test (ALT) is a developmental process of rigorous laboratory testing that simulates years of field use. Motorola has a firm commitment to quality and reliability. These radios have been designed,manufactured and tested to achieve high levels of component and workman-ship quality. Motorola radios are designed to minimize costly repairs and downtime.PR1500 PROFESSIONAL SERIES Two-Way RadioMOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc. 2007.MD-PR1500SPECS 5/07,。

特种计算机Industrial Computer产品说明书User ManualEIS-2205研祥工业服务器EVOC Industrial ServerVersion: B00法律资讯警告提示为了您的人身安全以及避免财产损失，必须注意本手册中的提示。

人身安全的提示用一个警告三角表示，仅与财产损失有关的提示不带警告三角。

警告提示根据危险等级由高到低如下表示。

危险表示如果不采取相应的小心措施，将会导致死亡或者严重的人身伤害。

警告表示如果不采取相应的小心措施，可能导致死亡或者严重的人身伤害。

小心带有警告三角，表示如果不采取相应的小心措施，可能导致轻微的人身伤害。

注意表示如果不注意相应的提示，可能会出现不希望的结果或状态。

合格的专业人员本文件所属的产品/系统只允许由符合各项工作要求的合格人员进行操作。

其操作必须遵照各自附带的文件说明，特别是其中的安全及警告提示。

由于具备相关培训及经验，合格人员可以察觉本产品/系统的风险，并避免可能的危险。

EVOC产品请注意下列说明：警告EVOC产品只允许用于目录和相关技术文件中规定的使用情况。

如果要使用其他公司的产品和组件，必须得到EVOC推荐和允许。

正确的运输、储存、组装、装配、安装、调试、操作和维护是产品安全、正常运行的前提。

必须保证允许的环境条件。

必须注意相关文件中的提示。

A类设备声明注意此为A级产品，在生活环境中，该产品可能会造成无线电干扰，在这种情况下，可能需要用户对其干扰采取切实可行的防护措施。

免责声明本公司保留对此手册更改的权利，产品后续相关变更时，恕不另行通知。

对于任何因安装、使用不当而导致的直接、间接、有意或无意的损坏及隐患概不负责。

订购产品前，请向经销商详细了解产品性能是否符合您的需求。

EVOC是研祥智能科技股份有限公司的注册商标。

本手册所涉及到的其他商标，其所有权为相应的产品厂家所拥有。

研祥智能科技股份有限公司©2014，版权所有，违者必究。

—Z X 1.5-R G as -ins u l a t e d m e d i u m v o l t a g e f o r r a i l w a y a p p l i c a t i o n —D I S T R I B U T I O N S O L U T I O N SZX1.5-R Gas-insulated medium voltage for railway application• Safety and reliability• 20% footprint saving• Easy operation• Complete solution—Table of contents004 – 005 006007008 – 009 010011012013Power engineering from ABB Focus on the detailsDurable and reliableSafety and ReliableTechnical DataOutgoing feeder Implementing customers' wishes Versatile and adaptable4ZX1.5-R D I S T R I B U T I O N S O L U T I O N SPower engineering from ABB —Solutions for the future.As a technology group with global operations, ABB supplies the solutions of the future for the core areas of our economy: public and industrial electricity, heat, gas and water supply. In that context, our clients benefit from a comprehensive product, system and service range in power engineering. With a combination of experience and innovative power, we offer them turnkey implementation of projects of all sizes, from planning to commissioning, from low voltage to high voltage and from process control to corporate management.Our innovative and holistic concepts for modular structure systems enable you to make optimum, economical use of the equipment deployed and thus ensure the necessary security of investment in today's markets.Gas-insulated switchgear from ABB.Flexible combination, reliability, availability and economy are the attributes that make it easy for our clients in industry and the public sector to decide in favor of this product series. The modular structure ensures that even unusual configurations can be economically implemented.The use of digital protection and control technology, sensor systems and plug-in connections makes the products in the ZX family unrestrictedly fit for the future, and the primary function of reliable power distribution is fulfilled.This is ensured by ABB's uncompromising approach to quality, which leaves no customer's wishes unfulfilled.5 POW ER E NGIN EERING FROM A B B—More than 3000 panels of the switchgear ZX1.5-R have been in service in traction power supply systems in Chinahigh speed railway and all over the world.6ZX1.5-R D I S T R I B U T I O N S O L U T I O NSFocus on the details—Design• Special for railway traction system application• Single busbar version, single/double pole• Laser welded stainless steel enclosures• Modular design• Panels coupled by plug-in busbar connectorswithout SF6 gas work• High cable termination point of 1250 mm• Inner cone cable plug system with sizes 3• Bus duct connection solidly insulated AdvantagesMaximum safety• Partitioning of functional compartments• Encapsulation completely protected againstaccess to hazardous parts• HV parts totally independent ofenvironmental influences• No effect of site altitude on dielectricstrength Minimum space required• Minimum switchgear dimensions due to SF6 insulation• Savings in building space Economy• Maximum availability for the operator• Maximum system service life as independent of the environment• Minimum maintenance requirement means significant savings in operating costsMetal-partitioned and gas-tight• SF6gas-insulated• Busbar compartment as hermetically sealed pressure system• Circuit-breaker compartment as hermetically sealed pressure system• 27.5 kV/2x27.5 kV•Up to 2500 A and 31.5 kA—1 Busbar connection between the panels2 Separate compartment for breaker andbusbar compartment.—3 Plug in serge arrester7 FOC U S O N TH E DET A ILSDurable and reliable—Plug-in technology at all ends.Every enclosure is hermetically sealed. Thefactory-assembled, routine tested gas-insulatedswitchgear accommodates all the live componentsin a gas-tight stainless steel enclosure containingSF6 gas. SF6stands for sulfur hexafluoride, anartificially manufactured gas molecule in which six fluorine atoms are arranged around one sulfur atom. With its good chemical and physical properties(excellent insulating capacity) SF6 provides optimumconditions for the handling of voltages over 1000 V. Not only power cables, but also busbars and voltage transformers are connected to the panels at an installation-friendly height using our tested and proven plug-in technology.The result is a hermetically sealed panel which requires no work with SF6at site.The advantages at a glance.• Dielectrically safe, even at atmospheric pressure • Sealed for life• Space-savingSF6 is an inert, nonflammable, non-toxic andnon-ozone depleting insulating medium.—SF6has three times the dielectric strength of air at atmospheric pressure.This can be further increased by increasing the pressure.SF6consists of very large molecules and can be enclosed without notable losses for the complete service life of a switchgear installation (approx. 40 years). Break down voltage010********SF62.0 bar 1.5 bar 1.0 barAir, 1.0 barVoltage(kV)255075100125150175200225250Distance (mm)8ZX1.5-R D I S T R I B U T I O N S O L U T I O N S Safety and Reliable —3-position switch• Motor-operated rod-type switch with three functions- Connecting, isolating and earthing- Disconnected position at center- Limit positions: Disconnector ON orearthing switch ON• Currentless preparation of any connection: Switching is performed exclusively by the circuit-breaker• Only a few live switch components in the gas compartment• Operating mechanism is located in front of panel and outside the gas compartment • Emergency manual operation optional with mechanical interlocking• Position detection by sensors or auxiliary switches• Mechanical position indicatorsCircuit-breaker VD4 XR• Horizontal arrangement of circuit-breaker poles • Operating mechanism outside the gas compartment• Poles and mechanism connected viagas-tight thrust bushing• Additional earthing function in combination with 3-position switch Advantages• Earthing by circuit breaker has advantages over earthing switch• Higher number of switching cycles onto faults • Causes no pollution of the SF6 during switching operationsBy merging 2 devices in a 3-position switch, mutual interlocking of the functions is integrated as part of the system and requires no further work.—In gas-insulated switchgear, earthing of switchgear section is performed by a high quality vacuum circuit-breaker. The circuit-breaker can close onto a short-circuit significantly more frequently and reliably than apositively making earthing switch.9S E R V I C E W H E R E V E R DeliveryComplete panels• Factory tested• Individual panels as transport units• With SF 6 at rated filling pressure • Suitable for handling by crane or fork lift truckInstallation• Easy and fast installation• Suitable for room heights over 2.8 meters• Erection on foundation frame or cable trench• Simple connection of panels via plug-inconnectors• Cable termination compartments withplug-in technology Commissioning • By trained skilled personnel • Direct access to the conductors through a separate test socket is available for current and voltage tests on site • without removing the cable connection - without gas work • Test socket can be used for cable tests or maintenance earthing Inspection and maintenance • No refill required under normal conditions due to sealed pressure system • Gas compartments are maintenance-free under normal conditions• Inspection predominantly comprises visualinspection and functional testing—Since 1968, ABB has acquired outstanding expertise in the design and construction of gas-insulated switchgear. ZX panels have been launched and in service since 1995 with reliable quality.10ZX1.5-R D I S T R I B U T I O N S O L U T I O N STechnical Data—U r U d U d U d U d U d U p f r I r I p I k I SC I MC P re P ae P me kV kV kV kV kV kV kV Hz A kA kA kA kA ms ms kPa kPa kPa VA(W)VA(W)VA(W)V °C °C °C m mm mm mm mm 27.5 / 2x27.59514011020032522050...2500...80...31.5...31.5...80O-0.3 s-CO-3 min-CO 3)30-4555-70SF 6 4)130120120 1) ＜200250250110,220 6) IP 65IP 4X 7)+40+35-15...1000 8) 2370 12)...1470500/800 13)1250Rated voltageLine-GroundLine-LineAcross isolated distanceLine-GroundLine-Line Across isolated distance Rated frequency 2)Rated busbars currentRated peak withstand currentRated short-time current, 4 sRated short-circuit breaking current of circuit-breakerRated short-circuit making current of circuit-breakerRated operating sequenceTotal break-time (approx.)Make-time (approx.)Insulating gasRated filling level for insulationAlarm level for insulationMinimum functional level for insulation 5)Rated dataCharging motorClosing coilOpening coilAuxiliary voltageDegree of protectionGas filled compartmentsLow voltage compartmentAmbient temperatureMaximum valueMaximum value of 24 hour meanMinimum valueAltitude for erection above sea levelDimensionsHeightDepth 9) 10) 11)Width Cable termination point Rated power frequency withstand voltage Rated lightning impulse withstand voltage1) Other values on request based on insulation situation.2) Rated frequency 60 Hz on request.3) Other operating sequence on request.4) Insulating gas: Sulphur hexafluoride SF 6.5) 100 kPa=1 bar.6) Other voltage on request.7) Other specification on request.8) Higher altitude for erection on request.9) Dependent on the number of cables per line.10) Low voltage compartment depth 400 mm.11) If there are more second device, 500 mm low voltage compartment could be selected and the panel depth will be extended by 100 mm.12) Could have other dimension based on actual function.13) The width of 500 mm is for the single pole feeder panel.11O U T G O I N G F E E D E ROutgoing feeder— 1. Density sensor2. Circuit-breaker operating mechanism3. Multifunctional Protection and Switchgear Control unit4. Measuring sockets for capacitive voltage indicator system5. 3-position switch operating mechanism6. 3-position switch7. Busbar8. Pressure relief disk9. Pressure relief duct10. Cable plug11. Cable socket12. CT13. Circuit-breaker1. Plug-in voltage transformer2. Density sensor3. Circuit-breaker operating mechanism4. Multifunction Protection and Switchgear Control unit5. Measuring sockets for capacitive voltage indicator system6. 3 position switch operating mechanism7. 3 position switch8. Busbar9. Pressure relief disk 10. Pressure relief duct 11. Cable plug 12. Cable socket 13. Circuit-breaker 14. CTCable termination compartment The installation-friendly, 1.25 m high cable termination compartment accommodates the main earthing bar, the high voltage cables to be connected with their cable plugs fitted, cablemountings and, where appropriate, surge arresters. 123456789910111213141012ZX1.5-R D I S T R I B U T I O N S O L U T I O N SImplementing customers' wishes——With the ZX1.5-R, all the variantsof electrical train traction powersystem can be implemented.ZX1.5-R always provides the rightsolution. Incoming and outgoing feeder panelsUr: ...27.5 kV Ir 1250 A 2 sockets per phase Ir: ...1250 A Ir: ...2500 A Ur: ...2x27.5 kV2 sockets per phase3 or4 sockets per phaseSingle pole Double pole Panel width 500 mm Panel width 800 mm Panel depth 1470 mm 4 sockets per phase Ir: ...2500 A Panel depth 1470 mm Panel depth 1470 mm Panel depth 1470 mmVoltage transformer,plug-in type2ndpick-off forcapacitive indicator in the doorInner cone socket 2 or 3xsize 3and plug-in surge arrestersInner cone socket 2xsize 3Inner cone socket 1..4xsize 313 VERSATILE AND ADAPTABLEVersatile and adaptable—Feeder with busbar disconnectionDouble polePanel width 800 mm Panel depth 1470 mm Ur: 2×27.5 kVIr: ...2500 AIr: ...2500 AFeeder with busbar PT or SADouble lineUr: 2×27.5 kVPanel width 800 mmPanel depth: 1470 mmOr Or1Y H A 000116_E N R E V A 2019.08—ABB Ltd.Distribution SolutionsElectrification Products division P.O. Box 8131CH-8050 ZurichSwitzerland/mediumvoltage © Copyright 2019 ABB. All rights reserved. Specifications subject to change without notice.。

FILTER KITS
011H 5R55N (Plastic) (0.4” Pickup Tube)........................................................................... 1 99-Up 46011 011H 5R55S (Metal/Plastic) (1.3” Pickup Tube) (Car)......................................................... 1 03-Up 46011B 011H 5R55S/W (Metal/Plastic) (2.4” Pickup Tube) (SUV).................................................... 1 02-Up 46011A
H
46
195
FORD 5R55N, 5R55S, 5R55W
46300W
46010
46010A 46010B
5R55N (99-Up)
Lincoln LS Jaguar X200
5R55W/S (02-Up)
Explorer
ill.
DESCRIPTION
QTY. YEAR
PART NO.
DELUXE KITS (SUPER KITS)
5R55N
5R55N
FORD 5R55N, 5R55S, 5R55W
F
G
Deluxe Kit---------------------------------- 008 Compliance Kit------------------------- 007 Master Kit -------------------------------- 006 Less Steel Kit--------------------------- 004 Overhaul Kit ----------------------------- 002 Bushing Kit ------------------------------- 030 Washer Kit -------------------------------- 200 Bearing Kit ------------------------------- 201 Technical Manual ------------------ 400 Pump Part---------------------------------- 507 Valve Body Parts -------------------- 741 Case Parts ------------------------------- 761 Note: Not all items are available for all transmissions

UL Listed Velocity Range Operating Humidity Range Thermal Ratings
Electrical Specifications Voltage Range Standby Current (max. avg.) LED Current (max.)
Features
• Sleek, low-profile design • Analog communications • Low standby current • Rotary address switches • Superior EMI protection • Dual LEDs for 360° visibility
Accessories
RA400Z Remote LED Annunciator
Head also sold separately (part no. T55-127-000)
XR2B Detector Removal Tool
* Add “A” for ULC listed product (e.g., 2251BA) ** The BCK-200B and WCK-200B are only applicable to the B210LP flanged style mounting base and may only be used with 2251B (photoelectric) and 1251B (ionization) smoke detectors.
Ordering Information
Part No. 2251B* 2251TB* 2251TMB* 1251B* 5251B* 5251RB* 5251H* Bases B501* B210LP* B501BH* B501BH-2* B501BHT* B501BHT-2* B224RB* B224BI* RMK400 SMK400 SMB600 Accessories F110 RA400Z M02-04-01 M02-09-00 XR2B XP-4 T55-127-000 BCK-200B WCK-2008 Description Photoelectric smoke detector Photoelectric smoke detector with thermal Acclimate™ multicriteria smoke detector Ionization smoke detector Fixed temperature thermal detector Rate-of-rise thermal detector High temperature thermal detector Flangeless mounting base Flanged mounting base Standard sounder base Standard sounder base; complies with UL864 9th edition Temporal tone sounder base Temporal tone sounder base; complies with UL864 9th edition Relay base Isolator base Recessed mounting kit Flangeless surface mounting kit Flanged surface mounting kit Retrofit flange Remote LED annunciator Detector test magnet Telescoping test magnet Detector removal tool (T55-127-000 included) Extension for XR2 (5 to 15 ft) Detector removal head Black detector kit (10 pack)** White Detector Kit (10 pack)**

Part Number: 1505ASerial Digital Coax, RG59, #20 Solid BC, Foil + 95% TC Braid, CMRProduct DescriptionLow Loss Serial Digital Coax, Riser-CMR, RG59 20 AWG solid bare copper conductor, foam HDPE core, Duofoil®+95% tinned copper braid, PVC jacket Technical SpecificationsProduct OverviewPhysical Characteristics (Overall)ConductorInsulationOuter Shield MaterialOuter Jacket MaterialElectrical CharacteristicsConductor DCRCapacitanceInductanceImpedanceReturn Loss (RL)Frequency [MHz]Minimum Return (RL)5 - 1600 MHz23 dB1600 - 4500 MHz21 dB4500 - 6000 MHz15 dBHigh Frequency (Nominal/Typical)Frequency [MHz]Nom. Insertion Loss1 MHz0.3 dB/100ft3.6 MHz0.6 dB/100ft5 MHz0.63 dB/100ft6 MHz0.69 dB/100ft7 MHz0.74 dB/100ft10 MHz0.9 dB/100ft12 MHz0.91 dB/100ft25 MHz 1.3 dB/100ft67.5 MHz 2.05 dB/100ft71.5 MHz 2.1 dB/100ft88.5 MHz 2.2 dB/100ft100 MHz 2.3 dB/100ft135 MHz 2.7 dB/100ft143 MHz 2.8 dB/100ft180 MHz 3.1 dB/100ft270 MHz 3.8 dB/100ft360 MHz 4.4 dB/100ft540 MHz 5.5 dB/100ft720 MHz 6.4 dB/100ft750 MHz 6.5 dB/100ft1000 MHz7.6 dB/100ft1500 MHz9.5 dB/100ft2000 MHz11.2 dB/100ft2250 MHz11.9 dB/100ft3000 MHz14.0 dB/100ft4500 MHz17.5 dB/100ft6000 MHz21.1 dB/100ftDelayNominal Delay Nominal Velocity of Propagation (VP) [%]1.24 ns/ft82 %VoltageUL Voltage Rating300 V RMSElectrical Characteristics Notes:TDR Impedance: 75 +/- 1.5 OhmsOther Electrical Characteristic 2:Return Loss: Fixed bridge and termination Temperature RangeUL Temp Rating:75°COperating Temp Range:-30°C To +75°CMechanical CharacteristicsUV Resistance:YesBulk Cable Weight:31 lbs/1000ftMax Recommended Pulling Tension:52 lbsMin Bend Radius/Minor Axis: 2.5 inStandardsNEC/(UL) Specification:CMRCEC/C(UL) Specification:CMGCPR Euroclass:EcaRG Type:59/U TypeApplicable Environmental and Other ProgramsEU Directive 2000/53/EC (ELV):YesEU Directive 2003/96/EC (BFR):YesEU Directive 2011/65/EU (ROHS II):YesEU Directive 2012/19/EU (WEEE):YesEU Directive Compliance:EU Directive 2003/11/EC (BFR)EU CE Mark:YesEU RoHS Compliance Date (yyyy-mm-dd):2005-01-01CA Prop 65 (CJ for Wire & Cable):YesMII Order #39 (China RoHS):YesSuitabilitySuitability - Aerial:Yes - Black only, when supported by messenger wire Suitability - Burial:NoSuitability - Hazardous Locations:NoSuitability - Indoor:YesSuitability - Outdoor:Yes - Black onlyFlammability, LS0H, Toxicity TestingUL Flammability:UL1666 Vertical ShaftCSA Flammability:FT4ISO/IEC Flammability:IEC 60332-1-2UL voltage rating:300 V RMSPlenum/Non-PlenumPlenum (Y/N):NoPlenum Number:1506APart NumberRelated Parts:1505BNCHD3VariantsItem #Color UPC Length Footnote1505A.00152Black152 m1505A.001525Black1,525 m1505A.00305Black305 m1505A 0101000Black6128253582821,000 ft C1505A 010500Black612825358732500 ft C1505A 0105000Black6128253563015,000 ft C N1505A.K0305Black305 m1505A 010N1000Black1,000 ft1505A 010N1000Black1,000 ft1505A.05152Blue152 m1505A.051525Blue1,525 m1505A.05305Blue305 m1505A 0061000Blue, Light6128253583051,000 ft C1505A 006500Blue, Light612825356271500 ft C1505A 0065000Blue, Light6128253563565,000 ft C N1505A 006N1000Blue, Light1,000 ft1505A 006N1000Blue, Light1,000 ft1505A 0011000Brown6128253583811,000 ft C1505A 0015000Brown6128253583505,000 ft C N1505A 001N1000Brown1,000 ft1505A 001N1000Brown1,000 ft1505A 0081000Gray6128253563321,000 ft C1505A 0085000Gray6128253563255,000 ft C N1505A 008N1000Gray1,000 ft1505A 008N1000Gray1,000 ft1505A.081525Gray, Slate1,525 m1505A.08305Gray, Slate305 m1505A.061525Green1,525 m1505A.06305Green305 m1505A N3U1000Green, Mil6128253583741,000 ft C1505A N3U5000Green, Mil6128253565165,000 ft C N1505A N3UN1000Green, Mil1,000 ft1505A N3UN1000Green, Mil1,000 ft1505A N3U1640Mil Green500 m1505A.031525Orange1,525 m1505A.03305Orange305 m1505A 0025000Orange6128253583295,000 ft C N1505A 0031000Orange6128253563941,000 ft C1505A 0035000Orange6128253563875,000 ft C N1505A 003N1000Orange1,000 ft1505A 003N1000Orange1,000 ft1505A.02152Red152 m1505A.021525Red1,525 m1505A.02305Red305 m1505A 0021000Red6128253583431,000 ft C1505A 002500Red612825358336500 ft C1505A 002N1000Red1,000 ft1505A 002N1000Red1,000 ft1505A.01152Violet152 m1505A.011525Violet1,525 m1505A.01305Violet305 m1505A 0071000Violet6128253564001,000 ft C1505A 0075000Violet6128253563495,000 ft C N1505A 007N1000Violet1,000 ft1505A 007N1000Violet1,000 ft1505A.071525White1,525 m1505A.07305White305 m1505A 0091000White6128253582991,000 ft C1505A 0095000White6128253563185,000 ft C N1505A 009N1000White1,000 ft1505A 009N1000White1,000 ft1505A.041525Yellow1,525 m1505A.04305Yellow305 m1505A 0041000Yellow6128253583121,000 ft C1505A 0045000Yellow6128253563705,000 ft C N1505A 004N1000Yellow1,000 ft1505A 004N1000Yellow1,000 ftFootnote: C - CRATE REEL PUT-UP.Footnote:N - FINAL PUT-UP LENGTH MAY VARY -0% TO +10% FROM LENGTH SHOWN.Product NotesNotes:Also available in 4.5 GHz multi-coax bundled versions. See 7794A through 7798A. Print legend includes sequential footage marks.HistoryUpdate and Revision:Revision Number: 0.291 Revision Date: 07-11-2019© 2019 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。

ADV212BBCZ-150中文资料JPEG 2000 Video CodecADV212Rev. 0Information furnished by Analog Devices is believed to be accurate and reliable. However , no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. T rademarks and registered trademarks are the property of their respective owners.One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.Tel: 781.329.4700 /doc/d59d7a8d83d049649b665891.html Fax: 781.461.3113 ?2006 Analog Devices, Inc. All rights reserved.FEATURESComplete single-chip JPEG 2000 compression and decompression solution for video and still images Identical in pinout and footprint to the ADV202 and supports all the functionality of the ADV202Power reduction of at least 30% compared with ADV202 JTAG/boundary scan supportPatented SURF? (spatial ultraefficient recursive filtering) technology enables low power, low cost wavelet-based compressionSupports both 9/7 and 5/3 wavelet transforms with up to 6 levels of transformVideo interface directly supporting ITU-R BT.656,SMPTE 125M PAL/NTSC, SMPTE 274M, SMPTE 293M(525p), and ITU-R BT.1358 (625p), or any video format with a maximum input rate of 65 MSPS for irreversible mode or 40 MSPS for reversible modeProgrammable tile/image size with widths up to 4096 pixels in single-component mode; maximum tile/image height: 4096 pixels2 or more ADV212s can be combined to support full-frame SMPTE 274M HDTV (1080i) or SMPTE 296M (720p)Flexible, asynchronous SRAM-style host interface allows glue-less connection to most 16-/32-bit microcontrollers and ASICs 2.5 V or 3.3 V input/output and 1.5 V core supply12 mm × 12 mm, 121-ball CSPBGA with a speed grade of 115 MHz, or 13 mm × 13 mm, 144-ball CSPBGA with a speed grade of 150 MHzAPPLICATIONSNetworked video and image distribution systems Wireless video and image distribution Image archival/retrieval Digital CCTV and surveillance systems Digital cinema systemsProfessional video editing and recording Digital still cameras Digital camcordersGENERAL DESCRIPTIONThe ADV212 is a single-chip JPEG 2000 codec targeted for video and high bandwidth image compression applications that can benefit from the enhanced quality and features provided by the JPEG 2000 (J2K)—ISO/IEC15444-1 image compression standard. The part implements the computationally intensive operations of the JPEG 2000 image compression standard andprovides fully compliant code-stream generation for most applications.The dedicated video port of the ADV212 provides glueless con-nection to common digital video standards such as ITU-R BT .656, SMPTE 125M, SMPTE 293M (525p), ITU-R BT .1358 (625p), SMPTE 274M (1080i), or SMPTE 296M (720p). A variety of other high speed, synchronous pixel and video formats can also be supported by using the programmable framing and validation signals.The ADV212 is an upgrade version of the ADV202 that is identical in pinout and footprint. It supports all the functionality of the ADV202 and has the following additional options: ? JTAG/boundary scan supportPower reduction of at least 30% compared with the ADV202 FUNCTIONAL BLOCK DIAGRAM06389-001ADV212Rev. 0 | Page 2 of 44TABLE OF CONTENTSFeatures (1)Applications (1)General Description (1)Revision History...............................................................................2 JPEG 2000 Feature Support (3)Specificatons (4)Supply Voltages and Current (4)Input/Output Specifications........................................................4 Clock and RESET Specifications................................................5 Normal Host Mode—Write Operation.....................................6 Normal Host Mode—Read Operation......................................7 DREQ /DACK DMAMode—Single FIFO Write Operation..8 DREQ /DACK DMA Mode—Single FIFO Read Operation.10 External DMA Mode—FIFO Write, Burst Mode..................12 External DMA Mode—FIFO Read, Burst Mode...................13 Streaming Mode (JDATA)—FIFO Read/Write......................14 VDATA Mode Timing...............................................................15 Raw Pixel Mode Timing............................................................17 JTAG Timing...............................................................................18 Absolute Maximum Ratings..........................................................19 Thermal Resistance....................................................................19 ESD Caution................................................................................19 Pin Configurations and Function Descriptions.........................20 Theory of Operation......................................................................25 Wavelet Engine...........................................................................25 Entropy Codecs...........................................................................25 Embedded Processor System....................................................25 Memory System..........................................................................25 Internal DMA Engine................................................................25 ADV212 Interface..........................................................................26 Video Interface (VDATA Bus)..................................................26 Host Interface (HDATA Bus)...................................................26 Direct and Indirect Registers....................................................26 Control Access Registers...........................................................27 Pin Configuration and Bus Sizes/Modes................................27 Stage Register..............................................................................27 JDATA Mode...............................................................................27 External DMA Engine...............................................................27 Internal Registers............................................................................28 Direct Registers...........................................................................28 Indirect Registers (29)PLL...............................................................................................30 Hardware Boot............................................................................31 Video Input Formats. (32)Applications (34)Encode—Multichip Mode (34)Decode—Multichip Master/Slave (35)Digital Still Camera/Camcorder (36)Encode/Decode SDTV Video Application.............................37 32-Bit Host Application.............................................................38 HIPI (Host Interface—Pixel Interface)...................................39 JDATA Interface.........................................................................40 Outline Dimensions.......................................................................41 Ordering Guide.. (42)REVISION HISTORY10/06—Revision 0: Initial VersionADV212Rev. 0 | Page 3 of 44The ADV212 can process images at a rate of 40 MSPS in reversible mode and at higher rates when used in irreversible mode. The ADV212 contains a dedicated wavelet transform engine, three entropy codecs, an on-board memory system, and an embedded reduced instruction set computer (RISC) processor that can provide a complete JPEG 2000 compression/decompression solution.The wavelet processor supports the 9/7 irreversible wavelet transform and the 5/3 wavelet transform in reversible and irreversible modes. The entropy codecs support all features in the JPEG 2000 Part 1 specification, except maximum shift region of interest (ROI).The ADV212 operates on a rectangular array of pixel samplescalled a tile. A tile can contain a complete image, up to the maximum supported size, or some portion of an image. The maximum horizontal tile size supported depends on the wavelet transform selected and the number of samples in the tile. Images l arger than the ADV212’s maximum tile size can be broken into individual tiles and then sent sequentially to the chip while maintaining a single, fully compliant JPEG 2000 code stream for the entire image. JPEG 2000 FEATURE SUPPORTThe ADV212 supports a broad set of features that are included in Part 1 of the JPEG 2000 standard (ISO/IEC 15444). See ADV212 User’s Guide for information on the JPEG 2000 features that the ADV212 currently supports.Depending on the particular application requirements, the ADV212 can provide varying levels of JPEG 2000 compression support. It can provide raw code block and attribute data output, which allows the host software to have complete control over the generation of the JPEG 2000 code stream and other aspects of the compression process such as bit-rate control. Otherwise, the ADV212 can create a complete, fully compliant JPEG 2000 code stream (J2C) and enhanced file formats such as JP2.ADV212Rev. 0 | Page 4 of 44SPECIFICATONSSpecifications apply to IOVDD = 2.5 V or 3.3 V over operating temperature range, unless otherwise specified.SUPPLY VOLTAGES AND CURRENTTable 1.Parameter Mnemonic Min Typ Max Unit DC Supply Voltage, Core VDD 1.425 1.5 1.575 V DC Supply Voltage, Input/Output IOVDD 2.375 2.5 2.625 V DC Supply Voltage, Input/OutputIOVDD 3.135 3.3 3.465 V Input Range V IN ?0.3 V DDI/O + 0.3 V Operating Ambient Temperature Range in Free Air T ?40 +25 +85 °CStatic Current 1I DD 15 30 mA Dynamic Current, Core (JCLK Frequency = 150 MHz)2 380 440 mA Dynamic Current, Core (JCLK Frequency = 108 MHz) 280 320 mA Dynamic Current, Core (JCLK Frequency = 81 MHz) 210 290 mA Dynamic Current, Input/Output 40 50 mA1 No clock or input/output activity. 2ADV212-150 only.INPUT/OUTPUT SPECIFICATIONSTable 2.ParameterMnemonic Min Typ Max Unit Test Conditions High Level Input Voltage V IH (3.3 V) 2.2 V VDD = maximum High Level Input Voltage V IH (2.5 V) 1.9 V VDD = maximum Low Level Input Voltage V IL (3.3 V, 2.5 V) 0.6 V VDD = minimum High Level Output Voltage V OH (3.3 V) 2.4 V VDD = minimum, I OH = ?0.5 mA High Level Output Voltage V OH (2.5 V) 2.0 V VDD = minimum, I OH = ?0.5 mA Low Level Output Voltage V OL (3.3 V, 2.5 V) 0.4 V VDD = minimum, I OL = +2 mA High Level Input Current I IH 1.0 μA VDD = maximum, V IN = VDD Low Level Input CurrentI IL 1.0 μA VDD = maximum, V IN = 0 V High Level Three-State Leakage Current I OZH 1.0 μA VDD = maximum, V IN = VDD Low Level Three-State Leakage Current I OZL 1.0 μA VDD = maximum, V IN = 0V Input Pin Capacitance C I 8 pF Output Pin CapacitanceC O 8 pFADV212Rev. 0 | Page 5 of 44CLOCK AND RESET SPECIFICATIONS1For a definition of MCLK, see Figure 32.MCLKVCLK06389-010Figure 2. Input ClockADV212Rev. 0 | Page 6 of 44NORMAL HOST MODE—WRITE OPERATION1For a definition of JCLK, see Figure 32.06389-012Figure 3. Normal Host Mode—Write OperationADV212Rev. 0 | Page 7 of 44NORMAL HOST MODE—READ OPERATION1Timing relationship between ACK falling transition and HDATA valid is not guaranteed. HDATA valid hold time is guaranteed with respect to RD rising transition. A minimum of three JCLK cycles is recommended between assert and deassert. 2For a definition of JCLK, see Figure 32.ADDRHDATACSRDACK06389-011Figure 4. Normal Host Mode—Read OperationADV212Rev. 0 | Page 8 of 44DREQ/DACK DMA MODE—SINGLE FIFO WRITE OPERATION 1For a definition of JCLK, see Figure 32.WEDACKDREQHDATA06389-013(EDMOD0/EDMOD1 <14:11> Not Programmed to a Value of 0000)WEDACKDREQHDATA 06389-014Figure 6. Single Write for DREQ /DACK DMA Mode for Assigned DMA Channel(EDMOD0/EDMOD1 <14:11> Programmed to a Value of0000)ADV212Rev. 0 | Page 9 of 44WEFBDACKDREQHDATA06389-015Figure 7. Single Write Cycle for Fly-By DMA Mode(DREQ Pulse Width Is Programmable)RDFCS0HDATAFSRQ006389-021ADV212Rev. 0 | Page 10 of 44DREQ/DACK DMA MODE—SINGLE FIFO READ OPERATION 1For a definition of JCLK, see Figure 32.RDDACKDREQHDATA06389-018Figure 9. Single Read for DREQ /DACK DMA Mode for Assigned DMA Channel(EDMOD0/EDMOD1 <14:11> Not Programmed to a Value of 0000)RDDACKHDATA 06389-019Figure 10. Single Read for DREQ /DACK DMA Mode for Assigned DMA Channel(EDMOD0/EDMOD1 <14:11> Programmed to a Value of 0000)ADV212Rev. 0 | Page 11 of 44RDFBDACKDREQHDATA 06389-020Figure 11. Single Read Cycle for Fly-By DMA Mode(DREQ Pulse Width Is Programmable)RDFSRQ0FCS0HDATA06389-090ADV212Rev. 0 | Page 12 of 44EXTERNAL DMA MODE—FIFO WRITE, BURST MODE1 Applies to assigned DMA channel, if EDMOD0 or EDMOD1 <14:11> is programmed to a nonzero value.2For a definition of JCLK, see Figure 32.06389-022DREQDACKWEHDATA06389-02306389-024ADV212Rev. 0 | Page 13 of 44EXTERNAL DMA MODE—FIFO READ, BURST MODE1 Applies to assigned DMA channel if EDMOD0 or EDMOD1 <14:11> is programmed to a nonzero value. 2For a definition of JCLK, see Figure 32.DREQ DACKHDATARD06389-025(EMOD0/EDMOD1 <14:11> Not Programmed to a Value of 0HDATARD06389-026(EMOD0/EDMOD1 <14:11> Programmed to a Value of 0000) DREQDACKRDFBHDATA 06389-027RDADV212Rev. 0 | Page 14 of 44STREAMING MODE (JDATA)—FIFO READ/WRITETable 10.ParameterMnemonic Min Typ MaxUnit MCLK to JDATA ValidJDATA TD 1.5 JCLK 1 2.5 × JCLK + 9.5 ns MCLK to VALID Assert/Deassert VALID TD 1.5 JCLK 2.5 × JCLK + 8.0 ns HOLD Setup to Rising MCLK HOLD SU 3 ns HOLD Hold from Rising MCLK HOLD HD 3ns JDATA Setup to Rising MCLK JDATA SU 3 ns JDATA Hold from Rising MCLKJDATA HD 3 ns1For a definition of JCLK, see Figure 32.MCLKJDATAVALIDHOLD06389-028Figure 19. Streaming Mode Timing—Encode Mode JDATA OutputMCLKJDATAVALIDHOLD06389-029Figure 20. Streaming Mode Timing—Decode Mode JDATA InputADV212Rev. 0 | Page 15 of 44VDATA MODE TIMINGTable 11.ParameterMnemonic Min Typ Max Unit VCLK to VDATA Valid Delay (VDATA Output) VDATA TD 12 ns VDATA Setup to Rising VCLK (VDATA Input) VDATA SU 4 ns VDATA Hold from Rising VCLK (VDATA Input) VDATA HD 4 ns HSYNC Setup to Rising VCLK HSYNC SU 3 ns HSYNC Hold from Rising VCLK HSYNC HD 4 ns VCLK to HSYNC Valid Delay HSYNC TD 12 ns VSYNC Setup to Rising VCLK VSYNC SU 3ns VSYNC Hold from Rising VCLK VSYNC HD 4 ns VCLK toVSYNC Valid Delay VSYNC TD 12 ns FIELD Setup to Rising VCLK FIELD SU 4 ns FIELD Hold from Rising VCLK FIELD HD 3 ns VCLK to FIELD ValidFIELD TD 12Decode Slave Data Sync Delay(HSYNC Low to First 0xFF of EAV/SAV Code) SYNC DELAY 81 VCLK cyclesDecode Slave Data Sync Delay(HSYNC Low to First Data for HVF Mode)101VCLKcycles 1The sync delay value varies according to the application. Refer to the ADV212 User Guide for more information.VCLKVDATA (IN)06389-091Figure 21. Encode Video Mode Timing—CCIR 656 ModeHSYNCVCLKVDATA (IN)06389-092Figure 22. Encode Video Mode Timing—HVF Mode (HSYNC Timing)(HSYNC Programmed for Negative Polarity)VSYNCVCLK FIELD06389-093Figure 23. Encode Video Mode Timing—HVF Mode (VSYNC and FIELD Timing)(VSYNC and FIELD Programmed for Negative Polarity)ADV212Rev. 0 | Page 16 of 44VCLKVDATA (OUT)HSYNC (IN)VSYNC (IN)FIELD (IN)06389-094Figure 24. Decode Video Mode Timing—CCIR 656 Mode, Decode Slave(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity) VCLKHSYNC (IN)VSYNC (IN)VDATA (OUT)FIELD (IN)06389-095Figure 25. Decode Video Mode Timing—HVF Mode, Decode Slave (HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)VCLKVDATA (OUT)HSYNC (OUT)VSYNC (OUT)FIELD (OUT)06389-096Figure 26. Decode Video Mode Timing—CCIR 656 Mode, Decode Master(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity) VCLKVDATA (OUT)HSYNC (OUT)VSYNC (OUT)FIELD (OUT)06389-097Figure 27. Decode Video Mode Timing—HVF Mode, Decode Master (HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)ADV212Rev. 0 | Page 17 of 44RAW PIXEL MODE TIMINGTable 12.ParameterMnemonic Min Typ Max Unit VCLK to PIXELDATA Valid Delay (PIXELDATA Output) VDATA TD 12 ns PIXELDATA Setup to Rising VCLK (PIXELDATA Input) VDATA SU 4 ns PIXELDATA Hold from Rising VCLK (PIXELDATA Input) VDATA HD 4 ns VCLK to VRDY Valid DelayVRDY TD 12 ns VFRM Setup to Rising VCLK (VFRAME Input) VFRM SU 3 ns VFRM Hold from Rising VCLK (VFRAME Input) VFRM HD 4 ns VCLK to VFRM Valid Delay (VFRAME Output) VFRM TD 12ns VSTRB Setup to Rising VCLK VSTRB SU 4 ns VSTRB Holdfrom Rising VCLKVSTRB HD 3 nsVCLKVFRM (IN)VSTRB (IN)VRDY (OUT)PIXEL DATA (IN)VCLKVFRM (OUT)VSTRB (IN)VRDY (OUT)PIXELDATA (OUT)06389-031Figure 28. Raw Pixel ModesADV212Rev. 0 | Page 18 of 44JTAG TIMINGTable 13.Parameter Mnemonic Min Typ Max Unit TCK PeriodTCK 134 ns TDI or TMS Setup Time TDI SU 4.0 ns TDI or TMS Hold Time TDI HD 4.0 ns TDO Hold Time TDO HD 0.0 ns TDO ValidTDO VALID 10.0 ns TRST Hold Time TRST HD 4.0 ns TRST Setup TimeTRST SU 4.0 ns TRST Pulse Width LowTRST LO 4 TCK cyclesTCKTDOTDITMSTRST06389-032ADV212Rev. 0 | Page 19 of 44ABSOLUTE MAXIMUM RATINGSTable 14.Parameter RatingVDD ? Supply Voltage, Core ?0.3 V to +1.65 VIOVDD ? Supply Voltage,Input/Output0.3 V to 3.63 V Storage Temperature [T S ] ?65°C to +150°C Reflow Soldering Pb-Free, 121-Ball 260°C [20 sec to 40 sec] Pb-Free, 144-Ball 260°C [20 sec to 40 sec]Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. THERMAL RESISTANCEθJA is specified for t he worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages. Table 15. Thermal ResistancePackage TypeθJA θJC Unit 144-Ball ADV212BBCZ 22.5 3.8 °C/W 121-Ball ADV212BBCZ32.87.92 °C/WESD CAUTION。

说明手册RS 155B (162-4455) / RS 156B (162-4456) RS 157B (162-4457) / RS 158B (162-4458) 钳表CN150B 系列 / CN首先阅读的信息安全信息理解并遵守操作说明。

只可按照本手册的规定来使用本仪表；否则可能有损仪表提供的保护能力。

警告识别可能导致身体伤害或死亡的危险状况和行为注意识别可能损坏待测仪表或设备的状况和行为警告˙使用测试引线或探头时，请将手指放在指套的后面。

˙如果可以触及待进行测量的设备中的危险带电部件，则应使用单独的防护设备。

˙在打开电池后盖或仪表外壳之前，请从仪表上取下测试引线。

˙只可按照本手册的规定来使用本仪表，否则会有损仪表提供的保护能力。

˙测量时务必使用正确的端子、开关位置和量程。

˙通过测量已知的电压，验证仪表的运行状况。

如有疑问，请维修本仪表。

˙请勿在端子之间或任何端子与接地端之间施加超过仪表上所标注电压的额定电压。

˙使用 30V 交流有效电压、42V 交流峰值电压或 60V 直流电压时，务必小心。

这些电压会造成电击危险。

˙为避免产生可能导致电击和人身伤害的错误读数，请尽快更换电池。

˙在测试电阻、通断性、二极管或电容之前，断开电路电源，并将所有高压电容器放电。

˙请勿在爆炸性气体或蒸气环境中使用仪表。

˙为了降低火灾或触电危险，请勿让本产品淋雨或受潮。

˙电源测量用探头组件应根据 EN 61010-031 的要求并依照测量类别 III 或 IV 进行适当定额，额定电压应至少等于待测电路的电压。

1150B 系列 / CN注意˙在变更功能旋转开关的位置之前，断开测试引线与测试点的连接。

˙请勿将电源连接到功能旋钮开关 Ω, %和 位置。

˙请勿将仪表暴露于极端温度或高湿度环境中。

˙请勿将仪表设置为 Ω, %和 功能来测量可能导致仪表和待˙测设备损坏的设备中的电源电路电压。

万用表和说明手册上标记的符号触电风险参见说明手册直流测量受到双重或者加倍绝缘保护的设备电池地线交流测量符合欧盟指令E允许在危险的带电的导体上使用或移开切勿丢弃或者丢掉本产品。

©2012 Sony Corporation Printed in Thailand ợ䒌❞ ⎏㙭WPD 濃㊉⌵⾋㙭㚞ㅴⅪ濄䗨㡱䇍㰝䗨㰝⠌Ɂ⃗ ㌴ỿ䗨DE.SPN ㆤ⎏䗨ĥαㆯ⃰Ħ濃QEG濄䗨孊个存㕲濇孛侸乀䲆⮠ ♡柢⬆␌孆䁑丣Ɂ⍓ṉ⚌ㅵṐ䗨⬆㆛㒓㉥亵䨽 㝉孆↔㙭⃗㚐ḋ␥䗨埉₩ὅ⿓⏰⶜夥敒柼奇䪸Ɂ↚径⒪濕䲆⮠⃐⍜⾟丳摤⒪濕䲆⮠濃 ♡濄㙭斴⃐⍜⾟丳摤⒪⚔⚤濕≻Ḑⵦ㚁斗⊞⢎斗⬏ 嵓23⍛㣠℄✲⢋⌊812⌃ḋ⚔濕㱔♡濃 㚞濄⅞䆬㕉㚃濕3123ⷘ:㙬CS 2为减少发生火灾或触电的危险，请勿让本装置淋雨或受潮。

重要安全说明－请保存这些危险说明为减少火灾或电击的危险，请仔细遵照这些说明操作[电池组如果电池组使用不当，电池组可能会爆炸，引起火灾，甚至化学灼伤。

请遵守下列注意事项。

•切勿拆卸。

•切勿压坏电池组，切勿让电池组受到敲打，跌落或遭到踩踏等外力或震动。

•切勿让电池组短路，切勿让金属物与电池端子接触。

•切勿放在温度超过60℃的高温处，如直射阳光下或停在太阳下的车内。

•切勿焚烧或丢弃在火中。

•切勿使用损坏或漏液的锂离子电池。

•务必用原装的Sony充电器或可以给电池组充电的设备给电池组充电。

•请将电池组放在儿童取不到的地方。

•请保持电池组干燥。

中文（简体字）警告小心CS 3•只能用Sony建议的相同或同等类型进行更换。

•请按照指示中的说明立即丢弃用过的电池组。

[电源适配器使用电源适配器时请使用附近的电源插座。

在使用设备时如果发生故障，请立即断开电源适配器与电源插座的连接。

如果有附带的电源线，则该电源线仅为本相机专用电源线，不能用于其它电子设备。

本产品已经过测定并确定符合EMC规范中所提出的使用不超过3米的连接电缆的限制。

[注意特定频率的电磁场可能会影响此设备的图像和声音。

[通知如果静电或电磁导致数据传送中断（失败），请重新启动应用程序或断开连接，并重新连接通信电缆（USB等）。

注意CS 4本产品标识的“高清”或“HD”以输出图像格式（或记录图像格式）为基准。

□授权通知 张□专利证书 张□专利年费发票 张
□专利库检索结果 张□其他
评定结论
评定人员
审核
批准
负责编制产品开发中各阶段试验计划，负责按试验计划组织实施，并对试验过程进行保障管理。
负责编制试验大纲、试验报告等相关试验技术文件。
负责试验过程的质量控制，问题反馈，并跟踪、验证试验问题的关闭。
负责试验车辆、试验样件、试验备件、试验仪器设备的管理。
99
100
101
102
103104ຫໍສະໝຸດ 105106107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
开发令号
产品型号
项目名称
开发阶段
开发性质
评 定 内 容
序号
项 目
判 定
意 见
1
是否申请专利？
□是 (□已申请□已受理 )
参与产品DVP编制，负责产品开发认可工作中的试验验证工作，负责产品开发的研究性试验。
负责产品开发试验流程及制度的建立及完善。
负责试验能力规划及试验室建设，负责试验标准、试验规范制定与研究。
负责外委试验的规划、组织、实施。
负责本部门计量业务管理，包括计量器具台账建立、器具送检及计量费用申请，确保在用计量器具检定/校准合格。
4.Responsible formanaging test vehicles、test samples、test spare parts、experiment instrumentsand equipments.

应用指南精确和高效地表征3000 V/20 A 功率器件B1505A 功率器件分析仪/曲线追踪仪引言提高能效和降低碳排放量是半导体行业目前面临的两大要求，因此对功率器件进行精确表征变得越来越重要。

工程师们在不断改进半导体器件结构和制造工艺的同时，为了支持更高的电压并实现更低的导通电阻，还围绕碳化硅（SiC）、氮化镓（GaN）和氧化镓（Ga2O3）等新型宽带隙（WBG）半导体材料展开了大量研究。

为此，他们需要一种能够同时处理高电压和大电流的测量仪器。

过去，工程师们通常使用曲线追踪仪来表征功率器件，但是这种仪器的电压和电流测量精度比较低，在进行小电流测量时分辨率也无法令人满意。

像 Keysight B1500A 这样的参数分析仪虽然具有非常好的电压和电流测量精度，但其电压和电流量程却不适合用于评测功率器件。

为了解决这些问题，是德科技推出了 B1505A 功率器件分析仪/曲线追踪仪。

它具有出色的电压和电流测量精度以及小电流测量分辨率，支持高电压和大电流测量，是一款简单易用的综合解决方案。

B1505A 配有新型 HVSMU（高电压源表模块）和 HCSMU（大电流源表模块），两者可分别输出最高 3000 V 电压和最高 20 A 电流。

B1505A 还支持 MFCMU（多频率电容测量单元），可以在 1 kHz 至 5 MHz 频率范围内进行电容测量。

此外，B1505A 还支持偏置 T 型接头，该接头与 HVSMU 配合使用，可以在最高 3000 V 的直流偏置下进行电容测量。

B1500A 和 B1505A 均自带 Keysight EasyEXPERT 软件，使您能够通过图形用户界面（GUI）便捷地控制所有这些测量资源。

EasyEXPERT 具有十分出色的自动分析、图形显示和数据处理能力，是这个功率器件表征和分析综合解决方案的重要组成部分。

使用 EasyEXPERT，您再也无需自行开发控制软件，也无需在定制的机架和堆叠系统中配备多台仪器。

0% 20% 40% 60% Total Output current (%)
80%
100%

July-2006
65
元器件交易网
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
Safe Operating Area
85 Operating Temperature °C
64
July-2006

元器件交易网
ECONOLINE
DC/DC-Converter
RxxP2xxS_D Series
2113 x 103 hours 2434 x 103 hours 299 x 103 hours 334 x 103 hours
R12P205S
R12P215S
0% 20% 40% 60% Total Output current (%)
80%
100%
0% 20% 40% 60% Total Output current (%)
80%
100%
RxxP205/09D
Efficiency / Load
100 80 60 40
R12P209D R05P205D, R12P205D R05P209D
ECONOLINE
DC/DC-Converter
RxxP2xx S_D Series
2 Watt SIP 7 Single & Dual Output
Selection Guide
Part Number SIP 7 RxxP23.3S RxxP205S RxxP209S RxxP212S RxxP215S RxxP23.3D RxxP205D RxxP209D RxxP212D Input Voltage (VDC) 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 5, 9, 12, 15, 24 Output Voltage (VDC) 3.3 5 9 12 15 ±3.3 ±5 ±9 ±12 Output Current (mA) 600 400 222 167 132 ±300 ±200 ±111 ±85 Efficiency (%) 70 70-75 70-75 70-75 75-80 70 70-75 70-75 70-75 75-80

See the label attached on the back cover and quote this information to your
dealer when you require service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential e shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
User’s Guide
L1515S/L1515SR
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

VDZ5.1B
Diodes
Zener diode
VDZ5.1B
zApplication Voltage regulation zExternal dimensions (Unit : mm) 㩷
㪇㪅㪍㫧㪇㪅㪇㪌 㪇㪅㪈㪊㫧㪇㪅㪇㪊
zLand size figure (Unit : mm)
㪇㪅㪌 㪇㪅㪌
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.

AT －150B称重控制器V1.01使用说明书目录概述┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄3 功能特点┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄3 前面板说明┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄4 后面板说明┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄5 技术规格┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄6安装┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄8 一般原则┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄8 传感器的连接┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄8 开关量输入、输出接口的连接┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄9 系统组成┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄11 数据输入操作┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄13 密码管理┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄14 标定┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄15 标定方法┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄15 标定参数┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄16工作参数设置┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄17工作参数设置方法┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄17工作参数说明┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄18配方设置┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄20配方的选择┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄20 配方设置方法┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄20 配方参数说明┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄21 输入/输出口测试┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄ 24 自动控制过程和功能┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄25 控制过程说明┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄25 操作┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄26 启动自动控制过程┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄26 暂停自动控制过程┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄26 手动清零┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄26 手动卸料┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄26 清除累计值┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄27 串行通讯协议┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄28 错误及报警信息┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄33 仪表外形┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄34 外形尺寸┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄34 开孔尺寸┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄34AT-150B称重控制器，具有精度高、速度快、性能稳定、功能强大、操作简便等特点,主要用于自动配料秤的测量与控制，最多控制6种料的配料。

EN xxx-5对应中文标准随着全球经济一体化的不断深入，通信和铁路交通领域的国际合作日益密切。

对于铁路交通领域而言，信号和通信系统的稳定运行对保障列车安全和运行效率至关重要。

EN xxx-5作为国际上铁路信号和通信系统的EMC标准之一，在铁路交通领域具有重要意义。

本文将对EN xxx-5中文标准的相关内容进行介绍和解读，以便读者更好地了解和应用该标准。

一、 EN xxx-5标准的背景和意义1.1 标准的起源EN xxx-5是欧盟对铁路信号和通信系统的电磁兼容性（EMC）要求的整体标准系列之一。

它是针对铁路信号和通信系统中电磁干扰问题的解决方案，旨在保证铁路信号和通信系统设备在复杂电磁环境中的正常运行。

1.2 标准的意义EN xxx-5的制定和实施，可以有效地提高铁路信号和通信系统设备的抗干扰能力，减少系统故障带来的安全隐患，保障铁路运输的安全性和高效性。

使用EN xxx-5标准还能够促进各国铁路信号和通信系统设备的互通互联，对于铁路交通的国际合作也具有积极的推动作用。

二、EN xxx-5中文标准的技术要求2.1 电磁兼容性要求EN xxx-5标准对铁路信号和通信系统设备的电磁兼容性提出了严格的要求，包括对电磁干扰的抗扰度和传导干扰的抑制等方面。

设备在各种电磁环境下都要能够保持正常工作，不受外界电磁干扰的影响，同时也不能对周围的其他设备和系统产生电磁干扰。

2.2 电磁辐射和传导干扰的限制EN xxx-5还对铁路信号和通信系统设备的电磁辐射和传导干扰进行了限制，要求设备在工作状态下产生的电磁辐射和传导干扰要控制在一定的范围内，以保证设备周围的其他设备和系统不会受到干扰。

2.3 大气放电和电压突变的抗扰度铁路信号和通信系统设备通常处于室外环境中，对大气放电和电压突变的抗扰度要求较高。

EN xxx-5对设备在大气放电和电压突变等环境下的抗扰度进行了规定，以确保设备在恶劣天气条件下仍然能够可靠地工作。

2.4 温度、湿度和振动环境的适应性铁路信号和通信系统设备通常需要在各种恶劣的环境条件下运行，EN xxx-5还对设备在高温、高湿、振动等环境下的适应性进行了要求，以保证设备在各种恶劣环境下都能够正常工作。