Abaqus Example Problems Manual Introduction
1 Static Stress/Displacement Analyses
2 Dynamic Stress/Displacement Analyses
3 Tire and Vehicle Analyses
4 Mechanism Analyses
5 Heat Transfer and Thermal-Stress Analyses
6 Fluid Dynamics and Fluid-Structure Interaction
7 Electrical Analyses
8 Mass Diffusion Analyses
9 Acoustic and Shock Analyses
10 Soils Analyses
11 Abaqus/Aqua Analyses
12 Design Sensitivity Analyses
13 Postprocessing of Abaqus Results Files Product Index ABAQUS例题手册
介绍
1静态应力/位移分析
2动态应力/位移分析
3轮胎和车辆分析
4机理分析
5传热和热应力分析
6流体动力学和流体结构相互作用7电气分析
8质量扩散分析
9声和冲击分析
10土壤分析
11 ABAQUS /水族分析
12设计灵敏度分析
13后处理结果文件
产品索引
2 Dynamic Stress/Displacement Analyses
2.1 Dynamic stress analyses
2.1.1 Nonlinear dynamic analysis of a structure with local inelastic collapse
2.1.2 Detroit Edison pipe whip experiment
2.1.3 Rigid projectile impacting eroding plate
2.1.4 Eroding projectile impacting eroding plate
2.1.5 Tennis racket and ball
2.1.6 Pressurized fuel tank with variable shell thickness 2.1.7 Modeling of an automobile suspension
2.1.8 Explosive pipe closure
2.1.9 Knee bolster impact with general contact
2.1.10 Crimp forming with general contact
2.1.11 Collapse of a stack of blocks with general contact 2.1.12 Cask drop with foam impact limiter
2.1.13 Oblique impact of a copper rod
2.1.14 Water sloshing in a baffled tank
2.1.15 Seismic analysis of a concrete gravity dam
2.1.16 Progressive failure analysis of thin-wall aluminum extrusion under quasi-static and dynamic loads
2.1.17 Impact analysis of a pawl-ratchet device
2.1.18 High-velocity impact of a ceramic target 2动态应力/位移分析
2.1动态应力分析
2.1.1非线性动力分析与当地的非弹性坍塌的结构
2.1.2底特律爱迪生管鞭实验
2.1.3刚性弹丸撞击侵蚀板
2.1.4冲刷弹丸冲击侵蚀板
2.1.5网球球拍和球
2.1.6加压燃料箱具有可变壳厚度
2.1.7建模的汽车悬架
2.1.8爆管封
2.1.9膝垫与一般的接触碰撞
2.1.10压与一般的接触形成
2.1.11折叠堆栈与通用接触块的
2.1.12木桶降与泡沫冲击限制器
2.1.13斜的影响铜棒的
2.1.14水晃荡在挡板罐
2.1.15抗震分析混凝土重力坝
2.1.16渐进失效分析准静态和动态载荷作用下薄壁铝型材挤压
2.1.17的影响分析一个棘爪棘轮装置2.1.18高速冲击陶瓷靶
2.2 Mode-based dynamic analyses
2.2.1 Analysis of a rotating fan using substructures and cyclic symmetry 2.2.2 Linear analysis of the Indian Point reactor feedwater line
2.2.3 Response spectra of a three-dimensional frame building
2.2.4 Brake squeal analysis
2.2.5 Dynamic analysis of antenna structure utilizing residual modes 2.2.6 Steady-state dynamic analysis of a vehicle body-in-white model 2.3 Eulerian analyses
2.3.1 Rivet forming
2.3.2 Impact of a water-filled bottle using Eulerian-Lagrangian contact 2.4 Co-simulation analyses
2.4.1 Closure of an air-filled door seal
2.4.2 Dynamic impact of a scooter with a bump
2.2模式为基础的动态分析
2.2.1分析用子结构和循环对称旋转的风扇
2.2.2线性分析印度点堆给水线
2.2.3响应谱三维框架建设
2.2.4制动尖叫分析
2.2.5动态分析天线结构的利用残余模式
2.2.6稳态动态分析汽车车身的白色模型
2.3欧拉分析
2.3.1铆钉形成
2.3.2影响采用欧拉- 拉格朗日接触的充满水的瓶子
2.4协同仿真分析
2.4.1封闭的充气门封
2.4.2动态影响与凸起的摩托车