SAMPLE MANUFACTURE AGREEMENT
Company Ltd (hereinafter referred to as “Consignor”).
Address:
Contacts:
Tel:
Fax:
Supplier:
Address:
Contacts:
Tel:
Fax:
This Sample Manufacture Agreement (hereinafter referred to as “this Agreement”) is entered into as of (hereinafter referred to as “Effective Date”), by and between XXX Company Ltd (hereinafter referred to as “Consignor”) and _______________________________ (hereinafter referred to as “Supplier”). Consignor and Supplier shall be hereina fter respectively referred to as the “Party” or collectively referred to as the “Parties”.
1.TERM
1.1 This Agreement shall be effective as of the Effective Date and shall be effective
for a period of one (1) year. After the expiration of the initial term, this Agreement shall be automatically renewed for successive periods of one (1) year unless one Party notifies the other Party in writing not less than ninety (90) days prior to the end of the initial or any renewal term, that this Agreement shall terminate at the end of the then current term, or unless earlier terminated in accordance with the terms and conditions of this Agreement.
2.SCOPE OF AGREEMENT
2.1 This Agreement shall be applicable to any and all manufacture business of
samples between Consignor and Supplier. The Parties acknowledge that this
Agreement will not constitute a commitment for Consignor to order any particular quantity of sample from Supplier.
3.PURCHASE ORDER
3.1 Samples to be purchased by Consignor from Supplier shall be subject to separate
purchase orders (hereinafter referred to as “Purchase Order”), which will specify particulars, including but not limited to price, quantity, delivery date and description of the samples. Consignor has the right to place Purchase Orders with Supplier. Supplier shall notify Consignor in writing whether or not Supplier accepts Purchase Orders within two (2) working days from the date of receipt of the Purchase Order. Provided, however that, as long as the Purchase Order complies with the terms and conditions of this Agreement, Supplier shall make its reasonable and best efforts in good faith to accept the Purchase Order. If Consignor does not receive Supplier’s reply regarding the acceptance or refusal of
a Purchase Order within the said period, the Purchase Order shall be deemed to
have been accepted by Supplier. The Purchase Order shall become effective upon acceptance (actual or deemed) by Supplier. Consignor shall reserve the right to vary a Purchase Order at any time before the Supplier’s con firmation of the Purchase Order without incurring any liability to Supplier. In case there are any conflicts between this Agreement and the Purchase Orders, the provisions of this Agreement shall prevail.
3.2 Consignor has the right to modify the content of Purchase Orders at any time,
including but not limited to quantity, delivery date and design requirements.
Consignor shall notify Supplier in writing within a reasonable period. Supplier shall promptly manufacture samples in accordance with the modified Purchase Orders placed by Consignor. In the event that Consignor cancels any Purchase Order, the Supplier shall cease manufacturing such samples immediately upon receipt of Consignor’s cancellation notice.
3.3 On the condition that Consignor modifies or cancels the Purchase Orders,
Suppliers shall make best efforts to reduce losses with proper arrangement of tools, materials, packages, staff, transportation, etc. Any reasonable and necessary additional costs actually incurred by Supplier resulting from Co nsignor’s
modification or cancelation of a Purchase Order shall be borne by Consignor under the premise that Supplier has submitted evidence to prove that such additional costs is attributable to Consignor and Consignor has confirmed in writing. Supplier shall bear the losses incurred and expanded due to their own cause.
4.PRICE AND PAYMENT
4.1 The price for the samples shall be mutually confirmed by the Parties and specified
in the Purchase Order. All samples unit prices shall include [the total samples package, individual and master cartons, carton inserts, and samples literature].
Future price agreements for ongoing samples and other adjustments to the samples shall be as mutually agreed by the Parties in writing.
4.2 Supplier shall be entitled to issue qualified invoice to Consignor for the advance
payment, that is, thirty percent (30%) of the total price of the Purchase Order (hereinafter referred to as “Advance Payment”), at any time after acceptance of the Purchase Order. Consignor shall make payment within thirty (30) working days from its receipt of the qualified invoice.
4.3 Supplier shall be entitled to issue qualified invoice to Consignor for the second
payment, that is, seventy percent (70%) of the total price of the Purchase Order (hereinafter referred to as “Second Payment”) at any time after Consignor’s acceptance of the Simples. Consignor shall make payment within thirty (30) working days from its receipt of the qualified invoice.
4.4 Each invoice shall quote the date and the number of the Purchase Order:
5.MATERIALS
5.1 All material shall be furnished by Supplier.
5.2 The materials shall comply with the quality standards of Consignor and all other
applicable quality standards.
5.3 Supplier shall carry out strict examination on the materials at the time it receives
the materials. Supplier shall keep original records of the aforesaid inspection and provide to Consignor upon Consignor’s request.
6.QUALITY
6.1 Consignor will send Design Document to Supplier via email or by other way as
Consignor chooses, and Supplier shall acknowledge the receipt of the Design Document in writing with company seal affixed thereto to Consignor within two
(2) working days after the date of receipt of the Design Document. Supplier shall
manufacture the sample in compliance with the aforesaid Design Document.
6.2 Where Supplier fails to provide the sample on time, Consignor shall have the right
to charge Supplier a penalty amounting to [___________] and require Supplier to continue to provide the sample within the grace period granted by Consignor.
Where the sample is not provided within the aforesaid grace period, Consignor shall have the right to terminate the cooperative relationship under this Agreement between the Parties.
6.3 Where the sample is rejected by Consignor in writing to Supplier, Consignor shall
have the right to require Supplier to make amendments to the sample within the time limit specified by Consignor, and the amendments shall meet the requirements of Consignor. Where Supplier fails to make the aforementioned amendments on time, Consignor shall have the right to charge Supplier a penalty amounting to [___________] and/or terminate the cooperative relationship under this Agreement between the Parties.
6.4 In the event of enquiries on the Design Documents and the requirements of
Consignor on the samples during the manufacturing process thereof, Supplier shall consult with Consignor in time.
7.PACKING AND TRANSPORTATION
7.1 Supplier warrants that at the time Consignor receives the samples packing and
transportation of the samples will comply with requirements of Consignors in terms of manner and standard.
8.DELIVERY AND INSPECTION
8.1 “Delivery” means the supply and delivery of the samples by Supplier to
Consignor in accordance with the Purchase Order, and deliver the sample together with specification, photo and serial number identification to Consignor via mail or by other way as designated by Consignor within the time limit as set forth in the Purchase Order.
8.2 Supplier acknowledges that time is of the essence and that any delay in Delivery
of the samples may cause material damage and losses to Consignor. Therefore, Supplier shall deliver the samples in strict compliance with its obligations under this Agreement and the Purchase Order.
8.3 If a delay in Delivery of the samples is anticipated by Supplier, Supplier shall
notify Consignor promptly after Supplier becomes aware of such potential delay, advising the reason and the estimated duration of the delay. In such event, in addition to any remedy under any applicable laws and regulations, Consignor shall have the right to:
8.3.1 require Supplier, at Supplier’s expense, to use any available means of
expedited transportation for Delivery within the time limit specified by Consignor; or
8.3.2 charge Supplier one percent (1%) or RMB 500 (whichever is higher) per
day of the total price of the affected Purchase Order as penalty if a delay in Delivery of the samples occurred; or
8.3.3 reject the samples and be refunded the Advance Payment of the Purchase
Order, and charge Supplier thirty percent (30%) or RMB 50000 (whichever is higher ) of the total price of the affected Purchase Order as a penalty if Delivery of the samples is delayed for more than 10 days.
8.3.4 Consignor shall have the right to claim against Supplier any and all losses,
damages, costs and expenses (including legal expenses) incurred or paid by Consignor.
8.4 If Supplier delivers the samples in excess of the amount set out in the Purchase
Order, or in more than three (3) working days advance of the date of Delivery, Consignor shall have the right to:
8.4.1 return such total amount of, or such part in excess of, the samples to
Supplier on freight collect basis; or
8.4.2 accept such samples in accordance with the terms and conditions of this
Agreement and the Purchase Order.
8.5 Ownership and risk of the loss or damage to the Simples shall pass from Supplier
to Consignor at the time of Consignor’s Acceptance of the samples.
8.6 Supplier warrants that the samples shall be free from and clear of any lien or any
other type of security interest or claim from any person. Supplier shall indemnify, defend, and hold harmless Consignor from any lien and any claim upon the samples and/or the material arising from or in connection with this Agreement, including, but not limited to, workers’ wages, the material, or the services to be furnished by Supplier.
8.7 Consignor shall have sixty (60) working days from the date of receipt of samples
to inspect and test for conformity with Design Document and other requirements of Consignor.
8.8 If any samples supplied by Supplier to Consignor are not packed in accordance
with packing requirements of Consignor, Consignor, without prejudice to other rights provided herein, shall have the right to reject such samples and return to Supplier at Supplier’s expense the whole or any part of such samples.
8.9 If a non-conformity is confirmed by Consignor during the inspection after
Consignor’s receipt of the samples, in addition to any remedy under any applicable laws and regulations, Consignor shall have the right to:
8.9.1 accept the whole or any part of the samples at a discounted price, where
Consignor, in its own discretion, deems that the reason for non-conformity is minor. The discounted price for such samples shall be agreed upon by the Parties;
or
8.9.2 reject the samples and be refunded the Advance Payment, and charge
Supplier thirty percent (30%) of the total price of the affected Purchase Order as a penalty. Furthermore, Consignor shall have the right to claim against Supplier any and all liability, losses, damages, costs and expenses (including legal expenses) awarded against or incurred or paid by Buyer therefrom; or
8.9.3 reject the samples and require Supplier, within a time limit specified by
Consignor, to remedy fully the non-conformity or replace the affected samples and resubmit the samples for re-inspection. In such event:
(a) Consignor shall have the right to withhold the Second Payment of the
Purchase Order, until the resubmitted samples are accepted by
Consignor;
(b) Consignor shall have the right to inspect the resubmitted samples;
(c) Where Supplier fails to resubmit the samples on time, a delay in Delivery
shall be deemed and Consignor shall have the rights set forth in this
Agreement; and
(d) Supplier shall bear all costs incidental to such repair and/or replacement,
including the removal, replacement, re-installation, and/or re-assembly of
the samples, including but not limited to, the costs and expenses arising
out of the re-inspection by Consignor of the remedied or replaced
samples.
9.INTELLECTUAL PROPERTY RIGHTS
9.1 Supplier acknowledges that the rights related to the images, trademarks, patents
and other intellectual properties provided by Consignor to Supplier during the period performing this Agreement belongs to Consignor. This Agreement shall not
be construed as giving the rights, ownership or interest of any intellectual property pertaining to the sample to Supplier. Supplier further acknowledges that the good will or reputation produced in the process of using the intellectual property of Consignor shall completely and exclusively belong to Consignor.
9.2 Supplier shall not furnish Consignor’s intellectual property rights or confidential
information (including technique data, drawing, etc.) to any third party. Without Consignor’s consent, Supplier shall not sell, lend or provide the samples hereunder by itself or via others.
9.3 Supplier shall not sell the copies or change, reverse engineering, decompose or
improve products or manufacture the derivatives of products during the valid term of this Agreement or after its termination. Any change, derivative or improvement without authorization shall belong to Consignor and the ownership belongs to Consignor ab initio.
9.4 Supplier shall procure its shareholders and employees not to violate the
obligations hereunder, failing which Supplier shall be deemed as in default.
Supplier’s violation of this Article shall be deemed as material breach of the Agreement and Supplier shall pay Consignor RMB 200,000 as liquidated damages. If the liquidated damages is insufficient to compensate for Consignor’s losses, Supplier shall also compensate the margin between the liquidated damages and all the losses suffered by Consignor (including legal cost, attorney fee, etc.).
9.5 Where Supplier commits a breach hereunder, Consignor shall have the right, in
addition to any other relief or remedies, and without prejudice to any rights rendered herein, to terminate this Agreement and/or all or any part of any Purchase Order upon written notice.
10.CONFIDENTIALITY
10.1 Supplier knows that it will receive or know the confidential information
depending on this Agreement or otherwise during the period performing this Agreement. Such confidential information includes but not limited to any
documents, materials, knowhow and other information in whatever form, whether technical or commercial, received or obtained by it or its Affiliates relating to the negotiation or execution of this Agreement or any documents executed in accordance herewith. Unless otherwise agreed herein, the confidential information and confidentiality obligations shall be subject to the Confidentiality Agreement signed by both parties separately.
10.2 Supplier promises to keep the confidential of the confidential information at any
time and protect the confidential information from theft, damages, loss or unauthorized acquisition. Without the prior written consent of Consignor, if both parties have cooperated before signing the Agreement involving the provision of confidential information, Supplier shall not directly or indirectly or authorize or permit others to use, disclose, develop, copy or modify any confidential information, and not to authorize or permit a third party to use, disclose, develop, copy or modify any confidential information for the purposes beyond the rights and obligations hereunder in the effective period and thereafter.
10.3 Supplier undertakes it will only disclose the confidential information to its
managers, employees, agents or contractors for the purpose of this Agreement, and procure such managers, employees, agents or contractors to know and observe this article and the confidentiality obligations agreed by both parties.
10.4 If Supplier is aware of any non-authorized disclosure, improper use,
embezzlement or other damages (whether on purpose or not), Supplier shall notify Consignor immediately.
10.5 Supplier shall, at Consignor’s request, return all originals, copies, reproductions
and summaries of Confidential Information and all other tangible materials and devices provided to Supplier as Confidential Information, or at Consignor’s option, certify destruction of the same.
10.6 Supplier may disclose the information according to the laws, regulations or the
command of relevant departments. When the condition allows, Supplier shall notify Consignor of the intended disclosure in advance to give reasonable
chances to Consignor for defense.
10.7 Supplier shall ensure its shareholders and employees will not breach the
obligations hereunder, otherwise Supplier shall be deemed as in default.
Supplier’s breach of this Article or the confidentiality agreement between the Parties, no matter directly or indirectly, shall be deemed as material breach of Agreement and Supplier shall pay Consignor RMB 200,000 as liquidated damages. If the liquidated damages are insufficient to compensate for Consignor’s losses, Supplier shall assume the margin between the liquidated damages and all the losses suffered by Consignor (including legal cost, attorney fee, etc.)
10.8 The terms and obligations hereunder shall survive after the termination or
expiration of this Agreement.
10.9 Where Supplier commits a breach hereunder, Consignor shall have the right, in
addition to any other relief or remedies, and without prejudice to any rights rendered herein, to terminate this Agreement and/or all or any part of any Purchase Order upon written notice.
11.WARRANTIES AND LIABILITYTERMINATION
11.1 Supplier warrants that Supplier will, solely for Consignor, manufacture, supply
and deliver samples in accordance with the design documents provided by Consignor (hereinafter referred to as “Design Document”), and other requirements of Consignor, and will not quote prices, manufacture, supply or deliver the aforesaid samples or samples of the same or similar appearance to any third party.
11.2 Supplier warrants that the price and other conditions in regard to the sale of the
samples offered hereunder or under other agreements between the Parties in the future shall be no less favorable than the prices and other conditions of sale that Supplier offers to any other customers for the same or similar samples.
Consignor may benchmark prices by spot buys, quotes, or other independent data. If Supplier offers more favorable prices or other conditions of sale to any
other person, Supplier shall offer to the same to Consignor on both a retroactive and prospective basis.
11.3 Supplier further warrants at all times that:
11.3.1 it will comply with all government requirements that may be applicable
from time to time; and
11.3.2 it has obtained all necessary governmental or other necessary permits and
approvals for the purpose of this Agreement; and
11.3.3 it has sufficient experience and ability to fulfill its obligation; and
11.3.4 it is financially solvent.
11.4 Supplier shall indemnify Consignor in full against all liability, loss, damages,
costs and expenses (including legal expenses) awarded against or incurred or paid by Consignor as a result of or in connection with:
11.4.1 any breach by Supplier of any warranty, covenant or other provisions set
out in this Agreement; and
11.4.2 any claim that the samples or their packaging infringes upon, or their
importation, use or resale, infringes upon, the patent, copyright, design right, trade mark or other intellectual property rights of any other person, except the samples manufactured strictly in accordance with the Design Documents; and
11.4.3 any liability or sample liability under the applicable law under which
liability in respect of the samples is awarded against or incurred or paid by Consignor or its agents, employees, employers, associates, affiliates or any business partners to whom Consignor finally has to pay or has paid; and
11.4.4 any act or omission of Supplier or its employees or agents in supplying,
delivering and installing the samples.
11.5 Where Supplier commits a breach hereunder, Consignor shall have the right, in
addition to any other relief or remedies, and without prejudice to any rights rendered herein, to terminate this Agreement and/or all or any part of any Purchase Order upon written notice.
12.FORCE MAJEURE
12.1 Neither Consignor nor Supplier shall be liable to the other or be deemed to be in
breach of this Agreement by reason of any delay in the performing, or any failure of its obligations in relation to the samples, if the delivery or failure is beyond that Party’s reasonable control so that the effect could not have been reasonably expected at the time of the conclusion of this Agreement or have been avoided or overcome by such party. However, the affected Party shall give written notification of such delay, including the anticipated duration of the delay or failure, to the other Party within five (5) working days after the event or occurrence.
13.TERMINATION
13.1 The Consignor shall be entitled to terminate this agreement without liability to
Supplier by giving notice to Supplier at any time if:
13.1.1 supplier files a certificate of dissolution or otherwise dissolves, terminates,
or liquidates, or is merged with or is consolidated into any other corporation, limited liability company, partnership, or other entity, without the Consignor’s written consent; or
13.1.2 under the PRC Law Supplier: (a) is adjudicated as bankrupt or insolvent;
(b) fails to pay its debts as they mature; or
13.1.3 Supplier ceases, or threatens to cease, to carry on business; or
13.1.4 Supplier explicitly expresses or indicates by act its intention not to perform
its obligations under this Agreement; or
13.1.5 Consignor reasonably apprehends that any of the events mentioned above
is about to occur in relation to Supplier and notifies in writing Supplier accordingly.
13.2 This Agreement can be terminated if the parties agree to do so upon negotiation.
Furthermore, Consignor is entitled to terminate this Agreement by giving a written notice to Supplier not less than one month in advance. Such termination does not constitute breach of contract.
13.3 In the event of any termination of this Agreement, the Supplier shall, upon the
Consignor’s request, immediately return to the Consignor or the agent thereof, including without limitation, confidential information, specification, samples, all correspondence, reports, drawings and any other items of whatever nature supplied to the Supplier by the Consignor or the agent or owned by the Consignor or the agent pursuant to this Agreement.
13.4 Such articles herein as those in regard to obligations of intellectual property
protection, non-disclosure of confidential information, the Supplier’s warranties and liability, and those in regard to the governing law and dispute resolution shall survive termination of this Agreement.
14.MISCELLANEOUS
14.1 ASSIGNMENT
Supplier shall not assign any rights or assign any obligation hereunder, voluntarily or by operation of law, to any other person, firm, or corporation including any subsidiary or affiliate of Supplier, without the prior written consent of Consignor, and any assignment or transfer without such consent shall be null and void and Supplier shall remain jointly and severally liable to perform its obligations under this Agreement, notwithstanding its attempted assignment or transfer.
14.2 GOVERNING LAW
This Agreement and all acts and transactions pursuant hereto and the rights and obligations of the Parties hereto shall be governed, construed and interpreted in accordance with the law of the People’s Republic of China(“PRC”), for the
purpose of this Agreement excluding Hong Kong, the Macau Special Administrative Region and Taiwan.
14.3 DISPUTE RESOLUTION
Any dispute arising from performance of this Agreement shall be settled through negotiation between the Parties. If no agreement is reached, such dispute shall be submitted to Southern China International Economic and Trade Arbitration Commission for arbitration in Shenzhen to be conducted according to the arbitration rules in effect at the time of application for arbitration. The language to be used in the arbitral proceedings shall be Chinese. The Arbitration Tribunal shall be composed by three arbitrators. The arbitration award is final and binding upon the Parties.
14.4 SEVERABILITY
The invalidity or unenforceability of any provision of this Agreement pursuant to any applicable law shall not affect the validity or enforceability of the remaining provisions hereof, but this Agreement shall be construed as if not containing the provision held invalid or unenforceable in the jurisdiction in which so held, unless, in the good faith opinion of Consignor, such invalid or unenforceable provisions comprise an integral part of, or are otherwise inseparable from the remainder of, this Agreement, in which case this Agreement, in such jurisdiction, shall immediately terminate and be of no further force and effect.
14.5 ENTIRE AGREEMENT
This Agreement, together with its exhibits attached hereto, and any Purchase Order constitute the entire and only agreement between the Parties with respect to the subject matter contained hereunder, and supersede and cancel all previous agreements, negotiations, commitments, and understandings, oral or in writing, with respect to the same. For the purpose of this Agreement, reference to this Agreement herein shall be reference to this Agreement and its exhibits, as the case may be. Any release, discharge, abandonment, change, alteration, or modification to this Agreement, in any manner, orally or otherwise, shall only be made by an instrument in writing signed by duly authorized representatives of the respective Parties.
14.6 LANGUAGE
This Agreement is executed in the English and Chinese languages. In the event of any discrepancy or conflict between English version and Chinese version, the Chinese version shall prevail.
IN WITNESS WHEREOF, the Parties have caused this Agreement in duplicate to be executed by their respective duly authorized representatives effective as of the day and year first above written.
Consignor: Supplier:
[Full name of Consignor] [Full name of Supplier]
________________________ ________________________ Authorized Representative Authorized Representative
(signature and seal) (signature and seal)
图文设计制作委托协议 Document serial number【KK89K-LLS98YT-SS8CB-SSUT-SST108】
图文设计制作委托协议 委托方：（以下简称甲方） 受托方：（以下简称乙方） 甲乙双方根据有关法律、法规，在平等互利的原则下，经双方友好协商一致，签订本协议并共同遵守。 一、价格约定 1.1图文制作包含效果图设计制作、彩图打印、文本设计制作、CAD图纸出图、施工图蓝图晒图等内容，具体制作要求按照双方协商确定。 1.2本协议图文设计制作费用合计为人民币元整（元）。 二、交货时间及交货地点约定 2.1交货时间：双方另行商定。 2.2交货地点：甲方办公地点。 三、制作要求约定 3.1甲方需提出具体明确的制作要求，乙方按甲方制作要求按质按时按量制作完成并交付甲方。 3.2在制作过程中，甲方如临时变更制作要求，应及时通知乙方，乙方在接到变更通知后应立即停止原制作方案，并将已经完成的成品及半成品数量报告甲方，双方协商补救办法；对于已制作的成品及半成品，甲方应承担相关的制作费用。 四、货款结算约定 4.1经甲乙双方协商一致，结算采用现结方式。 4.2付款方式：甲乙双方同意甲方采用现金方式支付项目费用。 五、甲方权利与义务 5.1甲方有权监督乙方完成委托的制作项目，并随时向乙方查询委托事项的执行情况。 5.2甲方应尽量明确制作要求，及时向乙方提供相关资料，供乙方设计/制作参考，并保证取得资料的合法性。 5.3甲方应按本协议约定向乙方支付制作费用。 六、乙方权利与义务 6.1乙方有权按本协议的价格约定条款收取制作费用。 6.2乙方应按甲方所委托事项按时、按质、按量进行设计或制作并交付甲方。 6.3乙方应妥善保管甲方所提供的资料，不得损坏、更改或用作本协议委托之外的其他用途，在完成本协议委托事项后归还甲方，销毁所有复制件。 6.4未经甲方事先书面同意,乙方不得将委托事项全部或部分转交他人完成。 6.5乙方对保密资料负有保密义务。未经甲方书面许可，乙方不得向任何第三方披露，不得将保密资料的部分或全部用于本协议约定事项以外的其他用途。 七、其他约定 本协议连同附件一式贰份，甲、乙双方各执壹份，具有同等的法律效力。 本协议自甲乙双方签字盖章之日起生效，有效期为一年。 甲方： 乙方： 年月日
委托制作合同 合同编号: 委托方：（以下称“甲方”） 住所：邮编： 联系电话： 受托方：（以下称“乙方”） 法定代表人： 住所：邮编： 联系电话： 甲方委托乙方制作内容，乙方同意接受甲方之委托。经双方协商一致，达成如下协议，以昭共同遵照执行。 一、委托工作内容、数量、质量要求 1、委托工作内容： 乙方接受甲方之委托，自行完成委托制作事项，制作内容、美术风格、规格等，以本合同附件中提供的样本或说明为准。 2、数量要求及质量要求：以甲方制定的验收标准（详见本合同附件）作为乙方全面履行义务的标准。 二、履行期限 1、本合同的履行期限自合同生效的下一个工作日起开始起算，具体履行期限见合同附件。 2、乙方应于履行期限届满前，完成全部委托工作，并应将完成作品以甲方要求的方式全面交付，具体要求详见 本合同附件。 3、合同履行期间，乙方应根据甲方制定的完成规划，分阶段完成制作任务。 三、履行地点及方式 1、甲方应于合同生效后，根据项目需求提供双方协商确定的制作所需资料。如订立合同时附件所含内容不足， 甲乙双方可以根据需要协商补充。 2、如甲方根据项目需求提供了制作样品或要求，乙方应按照甲方提供的样品或要求，按时按质完成工作。 3、乙方应以自己的设备和技术自行完成全部工作，未经甲方书面同意，不得将委托制作义务转由第三方承担， 否则甲方有权解除本合同，并要求乙方承担违约及赔偿责任。 4、乙方为完成委托事项而发生的成本和费用由乙方自行负担。 5、在本合同履行过程中，甲方将根据需要对乙方的工作进度及履行状况进行监督检查，以确保合同的完全履行， 乙方应对甲方的检查监督进行配合，并及时提供能够表明其工作进度的数据、成果及其它相关资料。 6、本合同的履行地点为乙方所在地。 四、酬金及付款方式 乙方全面履行本合同并交付成果后，甲方验收并书面确认，在出具确认书后，即履行支付义务。具体支付程序如下：
编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载 电路设计制作委托协议-(优质文档) 甲方：___________________ 乙方：___________________ 日期：___________________ 说明：本合同资料适用于约定双方经过谈判、协商而共同承认、共同遵守的责任与 义务，同时阐述确定的时间内达成约定的承诺结果。文档可直接下载或修改，使用 时请详细阅读内容。
电路设计制作委托协议 甲方：_______________________________________ 乙方: ___________________________________ 20 年月日
甲方：__________ 乙方: _________ 甲方委托乙方为其设计制作电路，为保质保量完成任务，经甲乙双方协商达成如下协议： 1. 在本协议书签订前，甲方应向乙方提供详细的电路设计任务书，明确设计制作电路的功能，各项参数等；该任务书作为乙方设计制作电路的依据。 2. 在本协议书签订前，甲方应详细阅读有关乙方的电路设计细则说明。 3. 在本协议书签订前，乙方应向甲方提交电路设计费用明细表，并详细介绍相关事项。 4. 协议变更终止 (1) 甲方终止协议：甲方承担一切已经用丁该电路设计的费用，并支付乙方相应的劳务费用；乙方有权收回已交丁甲方的所有有关电路设计的资料及产品，乙方并保留该设计的所有权利。 (2) 乙方终止协议：乙方承担一切已经用丁该电路设计的费用，并返还甲方在此之前所支付的所有费用。 (3) 以上两条在不可抗拒因素发生时无效。 (4) 因设计需要而变更本协议时，甲乙双方协商解决。 (5) 乙方电路设计不满足设计任务书要求时，按乙方终止协议处理。 5 .付费方式 (1)按照乙方向甲方提交的普通电路设计费用明细表，甲方应支付乙方设计该电路的全部费用为。 (2)本协议书签定后的工作日内，按照乙方应向甲方提交的普通电路设计费用明细表，甲方 须预先支付乙方全部电路设计费用的1/2,计 ,否则，按甲 方终止协议处理；在乙方按设计任务书要求完成设计并向甲方交付设计时，甲方应支付乙方全部剩余费用，否则，按甲方终止协议处理。 6.本协议三项(协议书，设计说明书，费用明细表)，一式两份，甲乙双方各一份；其具有法律依据和效力；乙方保留其最终解释权。 甲方(盖章)：乙方(盖章)： 代表(签字)：代表(签字)：
室内设计委托协议（一） 示范文本 In Order To Protect Their Legitimate Rights And Interests, The Cooperative Parties Reach A Consensus Through Consultation And Sign Into Documents, So As To Solve And Prevent Disputes And Achieve The Effect Of Common Interests 某某管理中心 XX年XX月
室内设计委托协议（一）示范文本使用指引：此协议资料应用在协作多方为保障各自的合法权益，经过共同商量最终得出一致意见，特意签订成为文书材料，从而达到解决和预防纠纷实现共同利益的效果，文档经过下载可进行自定义修改，请根据实际需求进行调整与使用。 协议细则 一、在正式进行设计制作前，甲方应提出设计的基本 要求以及补充说明。 二、甲方委托乙方室内设计，甲方须于签约同时支付 设计定金（设计工作完成后抵做设计费）。 三、乙方将在________年______月______日至________年 ______月______日，共________天完成全套设计图纸。全套 图纸交付甲方时，甲方应支付设计费余款。 四、乙方于上述时间范围内，与甲方沟通协商后，乙 方应配合甲方意见做必要之修改。甲方每次审核稿件时间 须自接到稿件时起四日以内确定稿件内容；甲方审核稿件 时间如逾四日，乙方交稿时间则依甲方所逾时间顺延之。
五、在施工图纸制作阶段，如果作业内容有大幅变动或追加稿件制作时，交稿时间得由双方另行议定，并另行追加制作费用。 六、乙方如未按预订进度交出上述作品，则甲方有权以每日扣除其设计费百分之一为罚金，并累计直到扣完所有设计费为止。 七、乙方设计制作稿件进行中，因天候、情事变更或不可归责乙方之事由等因素而终止时，依下列方式计费：1．草稿阶段：按照总设计费之________%计算。 2．正稿阶段：按照总设计费之________%计算。 3．完稿阶段：按照总设计费之________%计算。 委托方（甲方）签字：_________ 设计方（乙方）签字：_________ 请在此位置输入品牌名/标语/slogan Please Enter The Brand Name / Slogan / Slogan In This Position, Such As Foonsion
电路设计制作委托协议文本 Clarify their rights and obligations, and ensure that the legitimate rights and interests of both parties are not harmed ( 协议范本 ) 甲方：______________________ 乙方：______________________ 日期：_______年_____月_____日 编号：MZ-HT-007118
电路设计制作委托协议文本 甲方：_________乙方：_________甲方委托乙方为其设计制作电路，为保质保量完成任务，经甲乙双方协商达成如下协议：1．在本协议书签订前，甲方应向乙方提供详细的电路设计任务书，明确设计制作电路的功能，各项参数等；该任务书作为乙方设计制作电路的依据。2．在本协议书签订前，甲方应详细阅读有关乙方的电路设计细则说明。3．在本协议书签订前，乙方应向甲方提交电路设计费用明细表，并详细介绍相关事项。 4．协议变更终止 （1）甲方终止协议：甲方承担一切已经用于该电路设计的费用，并支付乙方相应的劳务费用；乙方有权收回已交于甲方的所有有关电路设计的资料及产品，乙方并保留该设计的所有权利。 （2）乙方终止协议：乙方承担一切已经用于该电路设计的费用，并
返还甲方在此之前所支付的所有费用。 （3）以上两条在不可抗拒因素发生时无效。 （4）因设计需要而变更本协议时，甲乙双方协商解决。 （5）乙方电路设计不满足设计任务书要求时，按乙方终止协议处理。5．付费方式 （1）按照乙方向甲方提交的普通电路设计费用明细表，甲方应支付乙方设计该电路的全部费用为_________元。 （2）本协议书签定后的_________个工作日内，按照乙方应向甲方提交的普通电路设计费用明细表，甲方须预先支付乙方全部电路设计费用的1／2，计_________元，否则，按甲方终止协议处理；在乙方按设计任务书要求完成设计并向甲方交付设计时，甲方应支付乙方全部剩余费用，否则，按甲方终止协议处理。6．本协议三项（协议书，设计说明书，费用明细表），一式两份，甲乙双方各一份；其具有法律依据和效力；乙方保留其最终解释权。 甲方（盖章）：_________乙方（盖章）：_________代表（签字）： _________代表（签字）：__________________年____月____日
YF-ED-J4027 可按资料类型定义编号 项目设计制作委托协议书 实用版 An Agreement Between Civil Subjects To Establish, Change And Terminate Civil Legal Relations. Please Sign After Consensus, So As To Solve And Prevent Disputes And Realize Common Interests. （示范文稿） 二零XX年XX月XX日
项目设计制作委托协议书实用版 提示：该协议文档适合使用于民事主体之间建立、变更和终止民事法律关系的协议。请经过一致协商再签订，从而达到解决和预防纠纷实现共同利益的效果。下载后可以对文件进行定制修改，请根据实际需要调整使用。 委托单位：_________（以下简称甲方）承接单位：_________（以下简称乙方） 根据《中国人民共和国合同法》及 _________有关规定，经双方协商，签订本合同，并共同履行。 一、甲方委托乙方设计制作的项目 1、项目名称：_________。 2、项目内容：以甲乙双方共同商定的方案及结构框图为基础，具体内容如下： _________。 3、项目完成日期：_________年_________
月_________日。 二、项目资料及文件的提交 1、由甲乙双方共同协商，确定本项目文案、结构框图及解说词等。 2、甲方负责提供本项目所需的说明文字、图片、录像等相关素材资料。 3、乙方在工作完成后，向甲方提交项目成果。 三、制作权及技术资料的保密 本项目的版权属甲方所有。 本项目中甲方提供的全部设计资料属甲方所有，乙方有责任对此予以保密，不得提供给第三方使用。 四、项目收费及支付方法 1、费用构成：多媒体制作（_________分
合作框架协议 甲方：XXXXXX有限公司（以下简称“甲方”） 乙方：XXXXXX有限公司（以下简称“乙方”） 甲乙双方基于友好互利、诚信合作原则，根据中国相关法律法规签订本框架协议，设备详细参数性能等其他要求另行制定合同，合同与本协议有冲突时以订货合同为准。 一、总则 本协议是甲乙双方在自愿平等的基础之上,充分理解协议内容，达成一致后签订。 二、合作产品 2.1乙方按甲方要求为甲方生产XXXX设备（未经甲方同意，不得委托、转包、外包加工）。 2.2乙方保证，销售给甲方的产品不存在任何瑕疵，未侵犯任何第三方合法利益。如因制造质量问题导致最终用户人身事故及财产损失，乙方应承担全部责任。导致甲方与第三方发生纠纷或对甲方经营活动产生影响，乙方应当积极善意的配合甲方妥善处理，如造成甲方损失，甲方有权要求乙方向甲方进行赔偿。 三、品质保证和售后服务 3.1乙方应保证提供给甲方的产品是经过严格质量检测，产品性能及质量标准不低于现行的各项国家标准、行业标准和行业惯例。 3.2 乙方提供的产品性能及参数应完全符合甲乙双方所签定的采购订单。 3.3 乙方对其向甲方提供的货物承诺提供完整的售后服务。质保期为一年（另有约定除外），质保期内免费提供售后服务，超过质保期后，乙方仍需提供售后服务，可酌情合理收取一定费用。 四、价格及付款条件 4.1 产品价格：乙方按照约定的价格向甲方提供产品及服务。 4.2 零配件价格：乙方以优惠价（一般不高于成本价的120%）向甲方提供零配件。 4.3 服务费：若甲方需要乙方额外提供安装维修服务（含超出质保期的售后服务），乙方应以合理的价格向甲方收取费用（合理指实际发生的交通住宿费用及符合乙方工资标准的补贴）。 4.4订单确立后，如甲方未对产品提出改动要求，乙方不得以任何理由增加该订单金额。 4.5如遇原材料采购成本变动，乙方有权根据实际情况调整价格，但应提前30天通知甲方。 4.6付款条件：订单签订后，甲方预付30%货款，收到乙方开具的全额增值税发票后，余款月结25天，每月20号为对账日，25号为付款日。 五、权利及义务 5.1甲方权利 5.1.1甲方有权对乙方提供的性能、质量有缺陷的产品作出退货或换货的选择。 5.1.2乙方应按照甲方要求配置制造设备，甲方有权指定零部件供应商，由乙方直接向甲方指定供 应商采购。 5.1.3甲方有权按照双方约定的标准对设备进行验收，甲方有权拒绝接收不符合要求的设备。5.2甲方义务 5.2.1甲方应按约定时间向乙方支付货款，不得无故拖延。 5.2.2甲方不得无故拒收乙方提供的完全满足订单条件的产品。 5.3乙方权利 5.3.1乙方有权拒绝甲方提出的不合理或有质量安全隐患的非标产品生产。
家居装饰设计委托协议书 新示范文本 In Order To Protect Their Legitimate Rights And Interests, The Cooperative Parties Reach A Consensus Through Consultation And Sign Into Documents, So As To Solve And Prevent Disputes And Achieve The Effect Of Common Interests 某某管理中心 XX年XX月
家居装饰设计委托协议书新示范文本使用指引：此协议资料应用在协作多方为保障各自的合法权益，经过共同商量最终得出一致意见，特意签订成为文书材料，从而达到解决和预防纠纷实现共同利益的效果，文档经过下载可进行自定义修改，请根据实际需求进行调整与使用。 甲方：_________ 乙方：_________ 兹甲方委托乙方设计位于_________实用面积_________ 平方米的私宅，双方应设计事宜达成以下协议： 一、甲方将房屋委托乙方设计，乙方将根据甲方的要 求，结合设计原理在甲方提供所有资料_________日内绘出 平面布置图。 二、甲方确认平面方案，确认后，甲、乙双方签订本 设计委托书，同时，甲方交付首期设计定金，金额为总设 计费的_________％。（设计费收取标准详见第六条），乙 方下现场实地尽寸复合。 三、签约后，乙方进入立面设计_________日内绘出详
细立面方案。 四、设计内容：设计平面方案图，全部施工图。 含配套专业：体定位图、吊顶图、开关插座图、电路布置图、各房间立面图，与业主沟通，审核后，双方签字定稿。 五、乙方根据立面方案制作效果图，（效果图制作收取标准详见第七条）。 六、图纸装裱要求：乙方交付壹套A3设计图纸，超出部分费用甲方自理，甲方结清设计尾款。 七、设计费收取标准：平面_________元／平方米，复式_________元／平方米，别墅_________元／平方米，本套私宅总设计费大写：_________（小写_________元），签定本协议时，甲方需交付设计定金大写：_________（小写 _________元），余款于乙方交付整套A3设计图纸时结清。 八、效果图制作收取标准：标准客厅_________元／
项目设计制作委托协议书 完整版 In the case of disputes between the two parties, the legitimate rights and interests of the partners should be protected. In the process of performing the contract, disputes should be submitted to arbitration. This paper is the main basis for restoring the cooperation scene. 【适用合作签约/约束责任/违约追究/维护权益等场景】 甲方：________________________ 乙方：________________________ 签订时间：________________________ 签订地点：________________________
项目设计制作委托协议书完整版 下载说明：本协议资料适合用于需解决双方争议的场景下，维护合作方各自的合法权益，并在履行合同的过程中，双方当事人一旦发生争议，将争议提交仲裁或者诉讼，本文书即成为复原合作场景的主要依据。可直接应用日常文档制作，也可以根据实际需要对其进行修改。 委托单位：_________（以下简称甲方）承接单位：_________（以下简称乙方） 根据《中国人民共和国合同法》及_________有关规定，经双方协商，签订本合同，并共同履行。 一、甲方委托乙方设计制作的项目 1、项目名称：_________。 2、项目内容：以甲乙双方共同商定的方案及结构框图为基础，具体内容如下：_________。
Both parties jointly acknowledge and abide by their responsibilities and obligations and reach an agreed result. 甲方：___________________ 乙方：___________________ 时间：___________________ 音乐委托制作合同
编号：FS-DY-20813 音乐委托制作合同 甲方(委托方)： 乙方(受托方)： 根据《中华人民共和国合同法》及甲方企业文化建设、品牌推广歌曲的创作要求，甲、乙双方本着真诚、平等、尊重、合作的原则，协商一致，签订本协议书，共同遵守如下条款： 一、项目名称： 企业歌曲委托制作 二、项目内容 1、作词； 2、作曲、配器（编曲）； 3、演唱、录音； 4、混音、合成； 三、费用 以上全部费用共计：元大写：（含税） 四、付款方式：
1、乙方完成歌词创作和修改并经甲方确认后，乙方开始进入旋律创作、配器、编曲、演唱录音程序的十个工作日内，甲方向乙方支付本协议总金额50%，即￥元。 2、全部录制、混音制作完，并通过甲方验收合格(甲方到公司来试听)乙方将成品交付甲方，提供正规发票给甲方后十个工作日内，甲方一次性付清本协议总金额50%的余款,即￥给乙方。 3.以上金额的付款均以货币形式支付（电汇、现金或其他双方任何的支付形式均可）。 五、甲方责权： 1、甲方提供企业精神、背景资料、经营理念、宣传口号及以往的广告用语和本项目所需的相关等材料（涉及商业秘密的乙方必须做好保密），作为乙方创作的参考依据。 2、甲方积极配合乙方要求，在本协议签订之后，甲方协助乙方创作企业歌词,最后由乙方完成作品的制作。 3、甲方在协议执行过程中，对乙方各阶段的工作计划安排，应给与支持和配合，对乙方的各类报告甲方应在及时给予反馈，如：歌词创作的意见回复等等，以确保创作如期完
编号：QJ-HT-0928 电路设计制作委托协议(官 方版) Both parties to the contract shall perform their obligations in accordance with the contract or the law within the contract period. 甲方：_____________________ 乙方：_____________________ 日期：_____________________ --- 专业协议范本系列下载即可用---
电路设计制作委托协议(官方版) 说明：该协议书适用于甲乙双方为明确各自的权利和义务，经友好协商双方同意签署协议，在协议期限内按照协议约定或者依照法律规定履行义务，可下载收藏或打印使用（使用时请先阅读条款是否适用）。 甲方：_________ 乙方：_________ 甲方委托乙方为其设计制作电路，为保质保量完成任务，经甲乙双方协商达成如下协议： 1．在本协议书签订前，甲方应向乙方提供详细的电路设计任务书，明确设计制作电路的功能，各项参数等；该任务书作为乙方设计制作电路的依据。 2．在本协议书签订前，甲方应详细阅读有关乙方的电路设计细则说明。 3．在本协议书签订前，乙方应向甲方提交电路设计费用明细表，并详细介绍相关事项。 4．协议变更终止 （1）甲方终止协议：甲方承担一切已经用于该电路设计的费用，并支付乙方相应的劳务费用；乙方有权收回已交于甲方的所有有关电路设计的资料
及产品，乙方并保留该设计的所有权利。 （2）乙方终止协议：乙方承担一切已经用于该电路设计的费用，并返还甲方在此之前所支付的所有费用。 （3）以上两条在不可抗拒因素发生时无效。 （4）因设计需要而变更本协议时，甲乙双方协商解决。 （5）乙方电路设计不满足设计任务书要求时，按乙方终止协议处理。 5．付费方式 （1）按照乙方向甲方提交的普通电路设计费用明细表，甲方应支付乙方设计该电路的全部费用为_________元。 （2）本协议书签定后的_________个工作日内，按照乙方应向甲方提交的普通电路设计费用明细表，甲方须预先支付乙方全部电路设计费用的1／2，计_________元，否则，按甲方终止协议处理；在乙方按设计任务书要求完成设计并向甲方交付设计时，甲方应支付乙方全部剩余费用，否则，按甲方终止协议处理。 6．本协议三项（协议书，设计说明书，费用明细表），一式两份，甲乙双方各一份；其具有法律依据和效力；乙方保留其最终解释权。
委托设计制作合同 委托设计制作在设计专业领域是很常见的，对于委托设计制作合同你理解是怎样的以下 是华律网小编为大家整理的委托设计制作合同范文，欢迎参考阅读。 委托设计制作合同范文 1 甲方： 乙方： 依据《中华人民共和国合同法》和有关法规的规定，甲方委托乙方进行公司大数据形象 设计、制作安装的工作，双方经协商一致，签订本合同，信守执行： 一、委托之事项： 甲方委托贵州吉虎广告传媒有限公司为其设计大数据形象设计、以及制作安装。 二、委托设计费用： 公司大数据形象设计、制作安装总价为：人民币25767元，(大写：贰万伍仟柒佰陆拾 柒元整)。(详见附件1、2) 三、付款方式： 1.甲方需在合同签订之日起两个工作日内将委托设计总费用的40%即人民币：陆仟元整，以及甲方制作完毕所有宣传资料起两个工作日内将委托制作的总费用即人民币：壹万零柒佰陆拾柒元整，通过电汇或银行转账到乙方公司帐户(乙方收到甲方的银行划帐凭据后作为标 志设计的开始时间)。 2. 大数据形象设计、制作安装完成后，甲方需在三天内签名或盖章确认(以传真方式确认同样有效)，确认后甲方应当即付标志设计费用的全部余款。 四、乙方设计方案的时间，交付方式： 1.设计稿：乙方需在30个工作日内设计出甲方公司需要的大数据形象设计初稿。 2.大数据形象设计定稿后，乙方以电子稿和打印版手册(一份)的方式交付设计的方案， 乙方在收到甲方余款结清后的有关凭据后一个工作日内交付。 3.制作：乙方需要设计定稿后10个工作日内制作、安装完毕甲方需要的宣传资料。 五、知识产权约定： 1.乙方对设计完成的方案享有著作权。甲方将委托设计的所有费用结算完毕后，乙方务 必将作品著作权全部转让给甲方。 2.甲方在未付清所有委托设计费用之前，乙方设计的作品著作权归乙方，甲方对该作品 不享有任何权利。 六、双方的权利义务： 甲方权利： 1.甲方有权对乙方的设计提出建议和思路，以使乙方设计的作品更符合甲方企业文化内 涵。 2.甲方有权对乙方所设计的作品提出修改意见; 3.甲方在付清所有设计费用后享有设计方案的所有权利; 甲方义务： 1.甲方按照合同约定支付相关费用; 2.甲方有义务提供有关企业资料或其他有关资料给乙方; 乙方权利： 1.乙方有权要求甲方提供有关企业资料供乙方设计参考; 2.乙方有权要求甲方按照合同约定支付相应款项; 乙方义务：
YOUR LOGO 如有logo可在此插入合同书—CONTRACT TEMPLATE— 精诚合作携手共赢 Sincere Cooperation And Win-Win Cooperation
集成电路制作合同(正式版) The Purpose Of This Document Is T o Clarify The Civil Relationship Between The Parties Or Both Parties. After Reaching An Agreement Through Mutual Consultation, This Document Is Hereby Prepared 注意事项：此合同书文件主要为明确当事人或当事双方之间的民事关系，同时保障各自的合法权益，经共同协商达成一致意见后特此编制，文件下载即可修改，可根据实际情况套用。 立约人_________（以下简称甲方）与_________（以下简称乙方）。甲乙双方为集成电路试制事宜，特立本合约，并同意条件如下： 第一条标的物：委托芯片名称_________（ICNo._________），甲方同意由乙方代寻适合之代工厂，就标的物进行集成电路试制。 第二条功能规格确认 一、甲方完成本设计案之各项设计及验证后，应将本产品之布图（Layout）交由乙方进行集成电路制作之委托事宜。 二、甲方的布图（Layout）资料，概以甲方填写之TAPEOUTFORM为依据，进行光罩制作。乙方不对甲方之布局图（Layout）作任何计算机软件辅助验
证。 三、标的物之样品验证系以乙方委托之晶圆代工厂标准的晶圆特性测试（WAT）值为准，甲方不得作特殊要求。 四、如甲方能证明该样品系因乙方委托之代工厂制程上之误失，致不符合参数规格范围，虽通过代工厂标准的晶圆特性测试，仍视为不良品。 第三条样品试制进度 一、甲方须于委托制作申请单中注明申请梯次，若有一方要求变更制作梯次，需经双方事前书面同意后始可变更。 二、原案若有因不可归责乙方之事由或不可抗力之情事，致无法如期交货，乙方应于事由发生时，尽速通知甲方，由双方另行议定交货期限。 第四条样品之确认 一、样品之确认以第二条之第二及三款之规定为依据，甲方不得对电气特性提出额外的样品确认标准，
电路设计合同范本详细版 Effectively restrain the parties’ actions and ensure that the legitimate rights and interests of the state, collectives and individuals are not harmed ( 合同范本 ) 甲方：______________________ 乙方：______________________ 日期：_______年_____月_____日 编号：MZ-HT-034037
电路设计合同范本详细版 甲方：_________ 乙方：_________ 甲方委托乙方为其设计制作电路，为保质保量完成任务，经甲乙双方协商达成如下协议： 1.在本协议书签订前，甲方应向乙方提供详细的电路设计任务书，明确设计制作电路的功能，各项参数等;该任务书作为乙方设计制作电路的依据。 2.在本协议书签订前，甲方应详细阅读有关乙方的电路设计细则说明。 3.在本协议书签订前，乙方应向甲方提交电路设计费用明细表，并详细介绍相关事项。 4.协议变更终止
(1)甲方终止协议：甲方承担一切已经用于该电路设计的费用，并支付乙方相应的劳务费用;乙方有权收回已交于甲方的所有有关电路设计的资料及产品，乙方并保留该设计的所有权利。 (2)乙方终止协议：乙方承担一切已经用于该电路设计的费用，并返还甲方在此之前所支付的所有费用。 (3)以上两条在不可抗拒因素发生时无效。 (4)因设计需要而变更本协议时，甲乙双方协商解决。 甲方：_________ 乙方：_________ 日期：_________ 云博图文设计 本文档文字均可以自由修改
YOUR LOGO 项目设计制作委托协议书范本正 式版 After The Contract Is Signed, There Will Be Legal Reliance And Binding On All Parties. And During The Period Of Cooperation, There Are Laws To Follow And Evidence To Find 专业合同范本系列，下载即可用
项目设计制作委托协议书范本正式 版 使用说明：当事人在信任或者不信任的状态下,使用合同文本签订完毕，就有了法律依靠,对当事人多方皆有约束力。且在履行合作期间,有法可依,有据可寻，材料内容可根据实际情况作相应修改，请在使用时认真阅读。 委托单位：_________（以下简称甲方）承接单位： _________（以下简称乙方） 根据《中国人民共和国合同法》及_________有关规定，经双方协商，签订本合同，并共同履行。 一、甲方委托乙方设计制作的项目 1、项目名称：_________。 2、项目内容：以甲乙双方共同商定的方案及结构框图为基础，具体内容如下：_________。 3、项目完成日期：_________年_________月_________日。 二、项目资料及文件的提交 1、由甲乙双方共同协商，确定本项目文案、结构框图及解说词等。 2、甲方负责提供本项目所需的说明文字、图片、录像等相关素材资料。 3、乙方在工作完成后，向甲方提交项目成果。 三、制作权及技术资料的保密
本项目的版权属甲方所有。 本项目中甲方提供的全部设计资料属甲方所有，乙方有责任对此予以保密，不得提供给第三方使用。 四、项目收费及支付方法 1、费用构成：多媒体制作（_________分钟）＋三维动画制作（_________秒钟）具体如下： （1）配音：（千字）：_________元 （2）片头制作（秒）：_________元 （3）图像、文字、视频处理：_________元 （4）素材搜集、美工设计：_________元 （5）程序包装：_________元 （6）合成剪辑：（分钟）_________元／分钟 （7）三维动画制作：（秒钟）_________元／秒 （8）本项目设计及制作费用计为：人民币_________元（￥_________元）。 2、合同签订后甲方即预付乙方费用总额的_________％即人民币_________元（￥_________元）。 3、项目初步完成，乙方向甲方提交初稿校验时，甲方再付乙方费用总额的_________％费用，即人民币_________元（￥_________元）。 4、项目完成，乙方向甲方提交成果文件时，甲方支付乙方余款费用总额的_________％费用，即人民币_________元
歌曲委托制作协议书 Document number：NOCG-YUNOO-BUYTT-UU986-1986UT
歌曲委托制作协议书 甲方(委托方)： 乙方(受托方)： 根据《中华人民共和国合同法》及甲方企业文化建设、品牌推广歌曲的创作要求，甲、乙双方本着真诚、平等、尊重、合作的原则，协商一致，签订本协议书，共同遵守如下条款： 一、项目名称：歌曲委托制作 二、项目内容 1、作词； 2、作曲、配器（编曲）； 3、演唱、录音； 4、混音、合成； 三、费用 以上全部费用共计：元大写：整（含税） 四、付款方式： 1、本协议签署后五个工作日内，甲方向乙方支付本协议总金额30%，即 ￥元作为委托制作首期预付金。 2、乙方完成歌词创作和修改并经甲方确认后，届时，乙方开始进入旋律创作、配器、编曲、演唱录音程序的壹拾伍个工作日内，甲方向乙方支付本协议总金额40%，即￥元。
3、全部录制、混音制作完成后，并通过甲方验收合格(甲方到公司来试听)在交付成品后叁个工作日内，甲方一次性付清本协议总金额30%的余款，即￥元给乙方。 4、全部款收到后乙方将成品交付给甲方并须开具发票。 5、以上金额的付款均以货币形式支付（电汇、现金或其他双方任何的支付形式均可）。 五、甲方责权： 1、甲方提供企业精神、背景资料、经营理念、宣传口号及以往的广告用语和本项目所需的相关等材料（涉及商业秘密的乙方必须做好保密），作为乙方创作的参考依据。 2、甲方积极配合乙方要求，在本协议签订之后，甲方协助乙方创作企业歌词,最后由乙方完成作品的制作。 3、甲方在协议执行过程中，对乙方各阶段的工作计划安排，应给与支持和配合，对乙方的各类报告甲方应在叁个工作日给予反馈，如：歌词创作的意见回复等等，以确保创作如期完成。 4、甲方根据本协议第九条：验收与标准界定的条款，具有最终审核验收权。 5、甲方应按本协议付款方式，向乙方支付相关费用。 六、乙方责权： 1、乙方负责歌曲创作制作的全部流程包括：企业文化调研、综合定位企划、作（填、改）词、作曲、编曲、配器、演唱、录音、整体合成、制成标准CD格式光碟。
甲 方：______________________________ 乙 方：______________________________ 日 期：_________年________月_______日 项目设计制作委托协议书模板 The purpose of contract is to restrain both parties to fulfill their responsibilities and obligations.
项目设计制作委托协议书 委托单位：_________(以下简称甲方) 承接单位：_________(以下简称乙方) 根据《中国人民共和国合同法》及_________有关规定，经双方协商，签订本合同，并共同履行。 一、甲方委托乙方设计制作的项目 1、项目名称：_________。 2、项目内容：以甲乙双方共同商定的方案及结构框图为基础，具体内容如下：_________。 3、项目完成日期：_________年_________月_________日。 二、项目资料及文件的提交 1、由甲乙双方共同协商，确定本项目文案、结构框图及解说词等。 2、甲方负责提供本项目所需的说明文字、图片、录像等相关素材资料。 3、乙方在工作完成后，向甲方提交项目成果。 三、制作权及技术资料的保密
本项目的版权属甲方所有。 本项目中甲方提供的全部设计资料属甲方所有，乙方有责任对此予以保密，不得提供给第三方使用。 四、项目收费及支付方法 1、费用构成：多媒体制作(_________分钟)+三维动画制作(_________秒钟)具体如下： (1)配音：(千字)：_________元 (2)片头制作(秒)：_________元 (3)图像、文字、视频处理：_________元 (4)素材搜集、美工设计：_________元 (5)程序包装：_________元 (6)合成剪辑：(分钟)_________元/分钟 (7)三维动画制作：(秒钟)_________元/秒 (8)本项目设计及制作费用计为：人民币_________元(￥_________元)。 2、合同签订后甲方即预付乙方费用总额的_________%即人民币_________元(￥_________元)。 3、项目初步完成，乙方向甲方提交初稿校验时，甲方再付乙方费用总额的_________%费用，即人民币_________元(￥_________元)。 4、项目完成，乙方向甲方提交成果文件时，甲方支付乙方余款费用总额的_________%费用，即人民币_________元(￥_________元)。 五、双方责任
STANDARD AGREEMENT SAMPLE (协议范本) 甲方：____________________ 乙方：____________________ 签订日期：____________________ 编号：YW-BH-005305 2020电路设计制作委托协议
2020电路设计制作委托协议范本 电路设计制作委托协议 甲方：_________乙方：_________甲方委托乙方为其设计制作电路，为保质保量完成任务，经甲乙双方协商达成如下协议：1．在本协议书签订前，甲方应向乙方提供详细的电路设计任务书，明确设计制作电路的功能，各项参数等；该任务书作为乙方设计制作电路的依据。2．在本协议书签订前，甲方应详细阅读有关乙方的电路设计细则说明。3．在本协议书签订前，乙方应向甲方提交电路设计费用明细表，并详细介绍相关事项。 4．协议变更终止 （1）甲方终止协议：甲方承担一切已经用于该电路设计的费用，并支付乙方相应的劳务费用；乙方有权收回已交于甲方的所有有关电路设计的资料及产品，乙方并保留该设计的所有权利。 （2）乙方终止协议：乙方承担一切已经用于该电路设计的费用，并返还甲方在此之前所支付的所有费用。 （3）以上两条在不可抗拒因素发生时无效。 （4）因设计需要而变更本协议时，甲乙双方协商解决。 （5）乙方电路设计不满足设计任务书要求时，按乙方终止协议处理。
5．付费方式 （1）按照乙方向甲方提交的普通电路设计费用明细表，甲方应支付乙方设计该电路的全部费用为_________元。 （2）本协议书签定后的_________个工作日内，按照乙方应向甲方提交的普通电路设计费用明细表，甲方须预先支付乙方全部电路设计费用的1／2，计 _________元，否则，按甲方终止协议处理；在乙方按设计任务书要求完成设计并向甲方交付设计时，甲方应支付乙方全部剩余费用，否则，按甲方终止协议处理。6．本协议三项（协议书，设计说明书，费用明细表），一式两份，甲乙双方各一份；其具有法律依据和效力；乙方保留其最终解释权。 甲方（盖章）：_________乙方（盖章）：_________代表（签字）：_________代表（签字）：__________________年____月____日_________年____月____日 XX网络科技有限公司 YunBo Network Technology Co., Ltd.
项目设计制作委托协议书详细 版 Clarify their rights and obligations, and ensure that the legitimate rights and interests of both parties are not harmed ( 协议范本 ) 甲方：______________________ 乙方：______________________ 日期：_______年_____月_____日 编号：MZ-HT-016148
项目设计制作委托协议书详细版 委托单位：_________（以下简称甲方）承接单位：_________（以下简称乙方）根据《中国人民共和国合同法》及_________有关规定，经双方协商，签订本合同，并共同履行。 一、甲方委托乙方设计制作的项目 1、项目名称：_________。 2、项目内容：以甲乙双方共同商定的方案及结构框图为基础，具体内容如下：_________。 3、项目完成日期：_________年_________月_________日。 二、项目资料及文件的提交 1、由甲乙双方共同协商，确定本项目文案、结构框图及解说词等。 2、甲方负责提供本项目所需的说明文字、图片、录像等相关素材资料。
3、乙方在工作完成后，向甲方提交项目成果。 三、制作权及技术资料的保密 本项目的版权属甲方所有。 本项目中甲方提供的全部设计资料属甲方所有，乙方有责任对此予以保密，不得提供给第三方使用。 四、项目收费及支付方法 1、费用构成：多媒体制作（_________分钟）＋三维动画制作 （_________秒钟）具体如下： （1）配音：（千字）：_________元 （2）片头制作（秒）：_________元 （3）图像、文字、视频处理：_________元 （4）素材搜集、美工设计：_________元 （5）程序包装：_________元 （6）合成剪辑：（分钟）_________元／分钟 （7）三维动画制作：（秒钟）_________元／秒 （8）本项目设计及制作费用计为：人民币_________元（￥_________