当前位置:文档之家› 锂电池充电器中英文对照外文翻译文献

锂电池充电器中英文对照外文翻译文献

锂电池充电器中英文对照外文翻译文献
锂电池充电器中英文对照外文翻译文献

中英文翻译

The design of the lithium battery

charger

Introduction

Li-Ion rechargeable batteries are finding their way into many applications due to their size, weight and energy storage advantages.These batteries are already considered the preferred battery in portable computer applications, displacing NiMH and NiCad batteries, and cellular phones are quickly becoming the second major marketplace for Li-Ion. The reason is clear. Li-Ion batteries offer many advantages to the end consumer. In portable computers,Li-Ion battery packs offer longer run times over NiCad and NiMH packs for the same form factor and size, while reducing weight. The same advantages are true for cellular phones. A phone can be made smaller and lighter using Li-Ion batteries without sacrificing run time. As Li-Ion battery costs come down, even more applications will switch to this lighter and smaller technology. Market trends show a continual growth in all rechargeable battery types as consumers continue to demand the convenience of portability. Market data for 1997 shows that approximately 200 million cells of Li-Ion will be shipped, compared to 600 million cells of NiMH. However, it is important to note that three cells of NiMH are equivalent to one Li-Ion cell when packaged into a battery pack. Thus, the actual volume is very close to the same for both. 1997 also marked the first year Li-Ion was the battery type used in the majority of portable computers, displacing NiMH for the top spot. Data for the cellular market showed a shift to Li-Ion in the majority of phones sold in 1997 in Europe and Japan.Li-Ion batteries are an exciting battery technology that must be watched. To make sense of these new batteries, this design guide explains the fundamentals, the charging requirements and the circuits to meet these requirements.

Along with more and more the emergence of the handheld electric appliances, to the

high performance, baby size, weight need of the light battery charger also more Come more big.The battery is technical to progress to also request continuously to refresh the calculate way more complicatedly is fast with the realization, safety of refresh.Therefore need Want to carry on the more accurate supervision towards refreshing the process, to shorten to refresh time and attain the biggest battery capacity, and prevent°from the battery Bad.The A VR has already led the one step in the competition, is prove is perfect control chip of the next generation charger. The microprocessor of Atmel A VR is current and can provide Flash, EEPROM and 10 ADCses by single slice on the market Of 8 RISC microprocessors of the tallest effect.Because the saving machine of procedure is a Flash, therefore can need not elephant MASK ROM Similar, have a few software editions a few model numbers of stock.The Flash can carry on again to weave the distance before deliver goods, or in the PCB Stick after pack carry on weaving the distance through an ISP again, thus allow to carry on the software renewal in the last one minute.

The EEPROM can used for conservancy mark certainly coefficient and the battery characteristic parameter, such as the conservancy refreshes record with the battery that raise the actual usage Capacity.10 A/ Ds conversion machine can provide the enough diagraph accuracy, making the capacity of the good empress even near to its biggest capacity. And other project for attaining this purpose, possible demand the ADC of the exterior, not only take up the space of PCB, but also raised the system Cost.

The A VR is thus deluxe language but 8 microprocessors of the designs of unique needle object" C" currently.The AT90S4433 reference The design is with" C" to write, the elucidation carries on the software design's is what and simple with the deluxe language.Code of C this design is very Carry on adjust easily to suit current and future battery.But the ATtiny15 reference design then use edit collected materials the language to write of, with Acquire the biggest code density.

An electric appliances of the modern consumption mainly uses as follows four kinds of batteries:

1.Seal completely the sour battery of lead( SLA)

2.The battery of NiCd

3.The NiMHhydrogen battery( NiMH)

4.Lithium battery( Li- Ion)

At right choice battery and refresh the calculate way need to understand the background knowledge of these batteries. Seal completely the sour battery( SLA) of lead seals completely the sour battery of lead to mainly used for the more important situation of the cost ratio space and weights, such as the UPS and report to the police the backup battery of the system.

The battery of SLA settles the electric voltage to carry on , assist limits to avoid with the electric current at refresh the process of early battery lead the heat.Want ~only the electricity .The pond unit electric voltage does not exceed the provision( the typical model is worth for the 2.2 Vs) of produce the company, the battery of SLA can refresh without limit.

The battery of NiCd battery of NiCd use very widespread currently.Its advantage is an opposite cheapness, being easy to the usage;Weakness is from turn on electricity the rate higher.The battery of NiCd of the typical model can refresh 1,000 times.The expired mechanism mainly is a pole to turn over.The first in the battery pack drive over.The unit that all turn on electricity will take place the reversal.For prevent°froming damage the battery wrap, needing to supervise and control the electric voltage without a break.Once unit electric voltage Descend the 1.0 Vs must shut down.

The battery of NiCd carries on refresh in settling the electric current by forever . The NiMH hydrogen battery( NiMH) holds to shoot the elephant machine 26 such as the cellular phone, hand in the hand that the importance measure hold equipments, the etc. NiMHhydrogen battery is an usage the most wide.This kind of battery permit.The quantity is bigger than NiCd's.Because lead to refresh and will result in battery of NiMH lose efficacy, carry on measuring by the square in refresh process with.Stop is count for much in fit time.Similar to battery of NiCd, the pole turn over the battery also will damage.

Battery of NiMH of from turn on electricity the rate and is probably 20%/ month.Similar to battery of NiCd, the battery of NiMH also settles the electric current to refresh .Other batteries says compare in lithium battery( Li- Ion) and this texts, the lithium battery has the tallest energy/ weight to compare to compare with energy/ physical volume.

Lithium battery Settle the electric voltage to carry on refresh with , want to have the electric current restrict to lead the heat in the early battery of refresh the process by avoid at the same time.When refresh the electric current.

Descend to produce the minimum electric current of the enactment of company will stop refresh.Leading to refresh will result in battery damage, even exploding.

The safety of the battery refreshes the fast charge machine( namely battery can at small be filled with the electricity in 3 hours, is usually a hour) demand of the modern.Can to the unit electric voltage, refresh the electric current and the battery temperatures to carry on to measure by the square, avoid at the time of being filled with the electricity because of leading to refresh.Result in damage.Refresh the method SLA battery and lithium batteries refreshes the method to settle the electric voltage method to want to limit to flow for the ever ; The battery of NiCd and battery of NiMHs refresh the method.Settle the electric current method for the ever , and have severals to stop the judgment method for refresh differently.

Biggest refresh the electric current biggest refresh the electric current to have relation with battery capacity( C).Biggest usually refresh the electric current to mean with the number of the battery capacity.For example,The capacity of the battery for 750 mAhs, refresh the electric current as 750 mAs, then refresh the electric current as 1 C(1 times battery capacity).If the electric current to flow refresh is a C/40, then refreshing the electric current for the battery capacity in addition to with 40.Lead the hot battery refresh is the process that the electric power delivers the battery.Energy by chemical reaction conservancy come down.But is not all.The electric powers all convert for the sake of the chemistry in the battery ability.Some electric power conversions became the thermal energy, having the function of the heating to the battery.When electricity.After pond be filled with, if continue to refresh, then all electric powers conversion is the thermal energy of the battery.At fast charge this will make the battery.Heat quickly, if the hour of can not compare with stop refresh and then will result in battery damage.Therefore, while design the battery charger, to the temperature.It is count for much that carry on the supervision combine to stop refresh in time.

The discretion method battery stopped refresh of different and applied situation and work environment limitted to the choice of the method that the judgment stop refresh.The sometimes temperature allow of no.Measure easily, but can measure electric voltage, or is other circumstances.This text takes the electric voltage variety rate(- dV/ dt) as the basic judgment to stop.The method for refresh, but with the temperature and absolute electric voltage be worth for assistance and backup.But the hardware support that this text describe

speaks as follows.The method of the havings of say.

Time of t –this method that is the decision when stop refresh most in https://www.doczj.com/doc/be9573443.html,ually used for spare project of the hour of fast charge.Sometimes also be .Refresh(14- 16 Hour) basic project of the method.

Be applicable to various battery.Stop refresh when the electric voltage of V – be the electric voltage to outrun the upper https://www.doczj.com/doc/be9573443.html,ually with the forever settle the electric current refreshes the match usage.The biggest electric current is decide by the battery, usually For the 1 C.For prevent froming refresh the electric current leads to causes battery lead greatly hot, the restrict of the electric current at this time very key.This method Is a lithium battery basic to refresh and stop project. The actual lithium battery charger usually still continues into after attain biggest electric voltage Go the second stage refresh, to attain 100% battery capacity. For battery of NiCd and battery of NiMHs are originally method can Be the spare judgment stops refreshing the project.

The method exploitation that this judgment of the dV/ dt – electric voltage variety rate stops refresh negative electric voltage variety rate.For the battery of some types, be the battery to be filled with the subsequence Refreshing continuously will cause electric voltage descend. At this time this project was very fit.This method usually useds for the ever to settle the electric current to refresh, Be applicable to to the fast charge of the battery of NiCd and battery of NiMH. The electric current of I – is to refresh the electric current small in a certain the number that set in advance stop refresh. Usually used for the ever to settle the electric voltage to refresh the method.Be applicable to the SLA Battery and lithium battery.

The T –temperature absolute zero can be the basis that battery of NiCd and battery of NiMHs stop refresh, but even suited for to be the backup project.Any battery for temperature to outrun initial value have to stop refresh.

The basis that the dT/ dt – temperature rising velocity fast charge variety rate of the temperature of hour can be to stop refresh.Please consult the norm that the battery produces the company( battery of NiCdOf typical model be worth for the 1 oC/ min) the – be applicable to the battery of NiCd and battery of NiMHs.

Need to stop refresh when the DT – outrun the temperature value of the environment temperature to be the bad battery temperature and the environment temperature to exceed

the certain threshold.This method can be the battery of NiCd and The project that battery of SLA stops refresh.While refreshing in the cold environment this method compares the absolute zero to judge the method better.Because most systems usually only have a temperature to stretch forward, have to will refresh the previous temperature to be the environment temperature.DV/ dt=0 –s zero electric voltages differ this method with- the method of dV/ dt is very and similar, and more accurate under the condition that electric voltage will not go up again. Be applicable to the NiCd Battery and battery of NiMH.

This reference design completely carried out the battery charger design of latest technique, can carry on to various popular battery type quicklyRefresh but need not to modify the hardware soon, a hardware terrace carries out a charger product line of integrity.Need only Want to will refresh the calculate way to pass lately the ISP downloads the processor of FLASH saving machine can get the new model number.However, this kind of method can shorten time that new product appear on market consumedly, and need a kind of hardware of stock only.This design provide The in keeping with SLA, NiCd, NiMH of the integrity and the database function of the battery of Li- Ion.

锂电池充电器的设计

介绍:

根据其尺寸,重量和能量储存优点,锂- 离子可再充电电池正在被用于许多的应用领域。这些电池已经被考虑为优先的电池于手提式计算机的应用,移置NiMH 和NiCad电池,而且行动电话正在飞快地成为锂电池的第二个主要的市场。理由是明显的。锂- 离子的电池提供很多的好处对与终端消费者。对于手提式计算机来说,锂-离子电池在相同条件和大小并减少重量的情况下能够提供比NiCad 和NiMH更为持久的电力。相同的优点对于蜂窝电话更是真实的。一个电话能被做得更小和更轻如果使用李- 离子的电池的话而不牺牲续航时间。当锂- 离子的电池费用降下来的话,甚至更多的应用将会转变到这一个更轻巧和更小巧的技术上来。当消费者一直要求方便的时候,市场的趋势表明一个持续不断的增长在所有的可再充电的电池中。根据以前市场的资料大约在1997年的时候表明大约二亿个锂-离子电芯将会被装船运送,相比较于600 百万个NiMH的电芯。然而,有必要说明的是三个NiMH 的电芯相当于一个锂- 离子的电芯在被包裹为电池包装的时候。因此,真实的体积对两者来说是非常接近一样的。1997年也被标记为第一年锂- 离子作为电池类型用于在大多数的手提式的计算机中, 移置NiMH 为高端领域中。资料显示1997年在欧洲和日本电池电芯市场表现出一个变化对于锂- 离子在多数的电话的应用中。锂- 离子的电池是一种令人兴奋的电池技术必

须给于高度的关注。要想了解这些新的电池,这设计引导者解释这些原则,要价需求以及符合这些需求的线路。

随着越来越多的手持式电器的出现,对高性能、小尺寸、重量轻的电池充电器的需求也越来越大。电池技术的持续进步也要求更复杂的充电算法以实现快速、安全的充电。因此需要对充电过程进行更精确的监控,以缩短充电时间、达到最大的电池容量,并防止电池损坏。A VR6已经在竞争中领先了一步,被证明是下一代充电器的完美控制芯片。Atmel A VR 微处理器是当前市场上能够以单片方式提供Flash、EEPROM 和10 位ADC的最高效的8 位RISC 微处理器。由于程序存储器为Flash,因此可以不用象MASK ROM一样,有几个软件版本就库存几种型号。Flash 可以在发货之前再进行编程,或是在PCB贴装之后再通过ISP 进行编程,从而允许在最后一分钟进行软件更新。EEPROM 可用于保存标定系数和电池特性参数,如保存充电记录以提高实际使用的电池容量。10位A/D 转换器可以提供足够的测量精度,使得充好后的容量更接近其最大容量。而其他方案为了达到此目的,可能需要外部的ADC,不但占用PCB 空间,也提高了系统成本。A VR 是目前唯一的针对象“C”这样的高级语言而设计的8 位微处理器。AT90S4433 参考设计就是用“C”写的,说明用高级语言进行软件设计是多么的简单。C 代码似的此设计很容易进行调整以适合当前和未来的电池。而ATtiny15 参考设计则是用汇编语言写的,以获得最大的代码密度。

现代消费类电器主要使用如下四种电池:

密封铅酸电池(SLA)

镍镉电池(NiCd)

镍氢电池(NiMH)

锂电池(Li-Ion)

在正确选择电池和充电算法时需要了解这些电池的背景知识。

密封铅酸电池(SLA) 密封铅酸电池主要用于成本比空间和重量更重要的场合,如UPS和报警系统的备份电池。SLA 电池以恒定电压进行充电,辅以电流限制以避免在充电过程的初期电池过热。只要电池单元电压不超过生产商的规定( 典型值为 2.2V),SLA 电池可以无限制地充电。镍镉电池(NiCd) NiCd 电池目前使用得很普遍。它的优点是相对便宜,易于使用;缺点是自放电率比较高。典型的NiCd 电池可以充电1,000 次。失效机理主要是极性反转。在电池包里第一个被完全放电的单元会发生反转。为了防止损坏电池包,需要不间断地监控电压。一旦单元电压下降到 1.0V 就必须停机。NiCd 电池以恒定电流的方式进行充电。镍氢电池(NiMH) 在轻重量的手持设备中如手机、手持摄象机,等等镍氢电池是使用最广的。这种电池的容量比NiCd 的大。由于过充电会造成NiMH 电池的失效,在充电过程中进行精确地测量以在合适的时间停止是非常重要的。和NiCd 电池一样,极性反转时电池也会损坏。NiMH 电池的自放电率大概为20%/ 月。和NiCd 电池一样,NiMH 电池也为恒定电流充电。

锂电池(Li-Ion) 和本文中所述的其他电池相比,锂电池具有最高的能量/ 重量比和能量/ 体积比。锂电池以恒定电压进行充电,同

时要有电流限制以避免在充电过程的初期电池过热。当充电电流下降到生产商设定的最小电流时就要停止充电。过充电将造成电池损坏,甚至爆炸。电池的安全充电现代的快速充电器( 即电池可以在小于3 个小时的时间里充满电,通常是一个小时) 需要能够对单元电压、充电电流和电池温度进行精确地测量,在充满电的同时避免由于过充电造成的损坏。充电方法SLA 电池和锂电池的充电方法为恒定电压法要限流;NiCd 电池和NiMH 电池的充电方法为恒定电流法,且具有几个不同的停止充电的判断方法。最大充电电流最大充电电流与电池容量(C) 有关。最大充电电流往往以电池容量的数值来表示。例如,电池的容量为750 mAh,充电电流为750 mA,则充电电流为1C (1 倍的电池容量)。若涓流充电时电流为C/40,则充电电流即为电池容量除以40。过热电池充电是将电能传输到电池的过程。能量以化学反应的方式保存了下来。但不是所有的电能都转化为了电池中的化学能。一些电能转化成了热能,对电池起了加热的作用。当电池充满后,若继续充电,则所有的电能都将转化为电池的热能。在快速充电时这将使电池快速升温,若不及时停止充电就会造成电池的损坏。因此,在设计电池充电器时,对温度进行监控并及时停止充电是非常重要的。

停止充电的判别方法电池的不同应用场合及工作环境限制了对判断停止充电的方法的选择。有时候温度不容易测得,但可以测得电压,或者是其他情况。本文以电压变化率(-dV/dt)为基本的判断停止充电的方法,而以温度和绝对电压值为辅助和备份。但是本文所描述

的硬件支持以下讲述的所有的方法。

t –时间这是决定何时停止充电的最简单的方法。通常用于快速充电时的后备方案。有时也作为普通充电(14 - 16 小时) 方法的基本方案。适用于各种电池。

V –电压当电压超出上限时停止充电。通常与恒定电流充电配合使用。最大电流由电池决定,通常为1C。为了防止充电时电流过大导致电池过热,此时电流限制是非常关键的。这个方法是锂电池的基本充电和停止方案。实际锂电池充电器往往在达到最大电压之后还继续进行第二阶段的充电,以达到100% 的电池容量。对于NiCd 电池和NiMH 电池本方法可以作为后备的判断停止充电方案。

-dV/dt –电压变化率这个判断停止充电的方法利用了负的电压变化率。对于某些类型的电池,当电池充满后继续充电将导致电压的下降。此时本方案就非常合适了。这个方法通常用于恒定电流充电,适用于对NiCd文电池和NiMH 电池的快速充电。

I –电流当充电电流小于某个预先设定的数值时停止充电。通常用于恒定电压充电法。适用于SLA电池和锂电池。T –温度绝对温度可以作为NiCd 电池和NiMH电池停止充电的依据,但是更适合于作为备份方案。温度超出设定值时任何电池都得停止充电。

dT/dt –温度上升速率快速充电时温度的变化率可以作为停止充电的依据。请参考电池生产商的规范(NiCd电池的典型值为1oC/min) –适用于NiCd 电池NiMH 电池。

DT –超出环境温度的温度值当电池温度和环境温度之差超过

医学文献中英文对照

动脉粥样硬化所导致的心脑血管疾病是目前发病率和死亡率较高的疾病之一。在动脉粥样硬化的形成过程中, 内皮细胞病变是其中极其重要的因素,最显著的变化是动脉内皮功能紊乱, 血管内皮细胞的损伤和功能改变是动脉粥样硬化发生的起始阶段。 Cardiovascular and cerebrovascular disease caused by atherosclerosis is one of diseases with higher mortality and morbidity at present . In the formation of atherosclerosis, the endothelial cell lesion is one of the most important factors, in which, the most significant change is endothelial dysfunction. In addition, the injuries and the changes of vascular endothelial cells are the initial factors of atherosclerosis. 许多因素会导致血管内皮细胞受损, 主要包括脂多糖(Lipopolysaccharides , LPS)、炎症介质、氧自由基等。其中脂多糖因其广泛的生物学作用, 越来越引起研究者的关注。LPS 是一种炎症刺激物, 是革兰阴性杆菌细胞壁的主要组成成分,其通过刺激血管内皮细胞,引起其相关细胞因子和炎性因子的表达紊乱,尤其是Ca2+ 和活性氧簇(Reactive Oxygen Species , ROS的合成和释放发生改变诱导细胞氧化应激内环境紊乱。大量研究表明, LPS 直接参与动脉粥样硬化的形成过程, 特别是动脉粥样硬化血管炎症的初始阶段, LPS可通过直接作用或间接影响的方式激活并损伤内皮细胞,从而引 起血管内皮细胞形态与功能的改变。 Many factors induce vascular endothelial cell damage, including lipopolysaccharides (LPS), inflammatory mediators and oxygen free

中英文参考文献格式

中文参考文献格式 参考文献(即引文出处)的类型以单字母方式标识: M——专著,C——论文集,N——报纸文章,J——期刊文章,D——学位论文,R——报告,S——标准,P——专利;对于不属于上述的文献类型,采用字母“Z”标识。 参考文献一律置于文末。其格式为: (一)专著 示例 [1] 张志建.严复思想研究[M]. 桂林:广西师范大学出版社,1989. [2] 马克思恩格斯全集:第1卷[M]. 北京:人民出版社,1956. [3] [英]蔼理士.性心理学[M]. 潘光旦译注.北京:商务印书馆,1997. (二)论文集 示例 [1] 伍蠡甫.西方文论选[C]. 上海:上海译文出版社,1979. [2] 别林斯基.论俄国中篇小说和果戈里君的中篇小说[A]. 伍蠡甫.西方文论选:下册[C]. 上海:上海译文出版社,1979. 凡引专著的页码,加圆括号置于文中序号之后。 (三)报纸文章 示例 [1] 李大伦.经济全球化的重要性[N]. 光明日报,1998-12-27,(3) (四)期刊文章 示例 [1] 郭英德.元明文学史观散论[J]. 北京师范大学学报(社会科学版),1995(3). (五)学位论文 示例 [1] 刘伟.汉字不同视觉识别方式的理论和实证研究[D]. 北京:北京师范大学心理系,1998. (六)报告 示例 [1] 白秀水,刘敢,任保平. 西安金融、人才、技术三大要素市场培育与发展研究[R]. 西安:陕西师范大学西北经济发展研究中心,1998. (七)、对论文正文中某一特定内容的进一步解释或补充说明性的注释,置于本页地脚,前面用圈码标识。 参考文献的类型 根据GB3469-83《文献类型与文献载体代码》规定,以单字母标识: M——专著(含古籍中的史、志论著) C——论文集 N——报纸文章 J——期刊文章 D——学位论文 R——研究报告 S——标准 P——专利 A——专著、论文集中的析出文献 Z——其他未说明的文献类型 电子文献类型以双字母作为标识: DB——数据库 CP——计算机程序 EB——电子公告

中英文论文对照格式

英文论文APA格式 英文论文一些格式要求与国内期刊有所不同。从学术的角度讲,它更加严谨和科学,并且方便电子系统检索和存档。 版面格式

表格 表格的题目格式与正文相同,靠左边,位于表格的上部。题目前加Table后跟数字,表示此文的第几个表格。 表格主体居中,边框粗细采用0.5磅;表格内文字采用Times New Roman,10磅。 举例: Table 1. The capitals, assets and revenue in listed banks

图表和图片 图表和图片的题目格式与正文相同,位于图表和图片的下部。题目前加Figure 后跟数字,表示此文的第几个图表。图表及题目都居中。只允许使用黑白图片和表格。 举例: Figure 1. The Trend of Economic Development 注:Figure与Table都不要缩写。 引用格式与参考文献 1. 在论文中的引用采取插入作者、年份和页数方式,如"Doe (2001, p.10) reported that …" or "This在论文中的引用采取作者和年份插入方式,如"Doe (2001, p.10) reported that …" or "This problem has been studied previously (Smith, 1958, pp.20-25)。文中插入的引用应该与文末参考文献相对应。 举例:Frankly speaking, it is just a simulating one made by the government, or a fake competition, directly speaking. (Gao, 2003, p.220). 2. 在文末参考文献中,姓前名后,姓与名之间以逗号分隔;如有两个作者,以and连接;如有三个或三个以上作者,前面的作者以逗号分隔,最后一个作者以and连接。 3. 参考文献中各项目以“点”分隔,最后以“点”结束。 4. 文末参考文献请按照以下格式:

乳腺癌护理中英文对照外文翻译文献

乳腺癌护理中英文对照外文翻译文献(文档含英文原文和中文翻译)

翻译: 宗教信仰在应对乳腺癌患者以后生活中的作用 目的: 识别并检查新诊断为乳腺癌的老年患者中是否存在宗教和精神应对策略现象。方法: 一个简易样本,由被招募来进行为期6个月的诊断的33名65岁女性组成。受访者被要求参加一个会提出灵活性问题的结构式访谈。访谈的誊本由三名研究人员各自独立分析讨论其主题,直至达成共识。 结果: 参加者的宗教背景为:17名新教徒,五,六名犹太人,天主教和另外四个其它教徒。她们在出席宗仪式的频率上存在着很大的不同。而在健康危机期她们的宗教和/或精神信仰或增加或保持不变。誊本分析显示出了三个主题。宗教和宗教信仰为受访者提供了必要的情感支持(91%)、社会支持(70%)来面对她们的乳腺癌,以及赋予了她们一些使日常生活变得有意义的能力,特别是癌症经验(64%)。 结论: 宗教和宗教信仰为新诊断为乳腺癌的老年女性患者提供了一些重要的应对这些疾病的方法,这些方法也得到了诊断医生的认可。这可能对于鼓励这些患者寻求宗教的支持和/或重新与她们的宗教团体再结合是非常重要的。 引言 一个关于乳腺癌的新的诊断已被证实对女性有重大的影响(格里,1979;琼斯和格林伍德1994;罗兰和马西,1996分;安徒生,1998)。在老年妇女中,乳腺癌是最常见的癌症,其影响还会因为人口老龄化继续上升。更好的了解老年妇女如何应对乳腺癌可以使人们更好的增强功能和改善生活质量。 最近日益让人们产生浓厚兴趣的是,宗教或信仰在患者对乳腺癌的反应中所扮演的角色。 在这些老年人中,宗教经常可以帮助她们缓解生理疾病中的固有压力,比如那些伴随着医师会诊、治疗及其它事件所产生的相关压力(包括罗斯,1982;考恩威博士

中英文论文参考文献标准格式 超详细

超详细中英文论文参考文献标准格式 1、参考文献和注释。按论文中所引用文献或注释编号的顺序列在论文正文之后,参考文献之前。图表或数据必须注明来源和出处。 (参考文献是期刊时,书写格式为: [编号]、作者、文章题目、期刊名(外文可缩写)、年份、卷号、期数、页码。参考文献是图书时,书写格式为: [编号]、作者、书名、出版单位、年份、版次、页码。) 2、附录。包括放在正文内过份冗长的公式推导,以备他人阅读方便所需的辅助性数学工具、重复性数据图表、论文使用的符号意义、单位缩写、程序全文及有关说明等。 参考文献(即引文出处)的类型以单字母方式标识,具体如下: [M]--专著,著作 [C]--论文集(一般指会议发表的论文续集,及一些专题论文集,如《***大学研究生学术论文集》[N]-- 报纸文章 [J]--期刊文章:发表在期刊上的论文,尽管有时我们看到的是从网上下载的(如知网),但它也是发表在期刊上的,你看到的电子期刊仅是其电子版 [D]--学位论文:不区分硕士还是博士论文 [R]--报告:一般在标题中会有"关于****的报告"字样 [S]-- 标准 [P]--专利 [A]--文章:很少用,主要是不属于以上类型的文章 [Z]--对于不属于上述的文献类型,可用字母"Z"标识,但这种情况非常少见 常用的电子文献及载体类型标识: [DB/OL] --联机网上数据(database online) [DB/MT] --磁带数据库(database on magnetic tape) [M/CD] --光盘图书(monograph on CDROM) [CP/DK] --磁盘软件(computer program on disk) [J/OL] --网上期刊(serial online) [EB/OL] --网上电子公告(electronic bulletin board online) 很显然,标识的就是该资源的英文缩写,/前面表示类型,/后面表示资源的载体,如OL表示在线资源 二、参考文献的格式及举例 1.期刊类 【格式】[序号]作者.篇名[J].刊名,出版年份,卷号(期号)起止页码. 【举例】 [1] 周融,任志国,杨尚雷,厉星星.对新形势下毕业设计管理工作的思考与实践[J].电气电子教学学报,2003(6):107-109. [2] 夏鲁惠.高等学校毕业设计(论文)教学情况调研报告[J].高等理科教育,2004(1):46-52. [3] Heider, E.R.& D.C.Oliver. The structure of color space in naming and memory of two languages [J]. Foreign Language Teaching and Research, 1999, (3): 62 67. 2.专著类

建设部文献中英文对照

贯彻落实科学发展观大力发展节能与绿色建筑 (2005年2月23日) 中华人民共和国建设部 节能建筑是按节能设计标准进行设计和建造、使其在使用过程中降低能耗的建筑。 绿色建筑是指为人们提供健康、舒适、安全的居住、工作和活动的空间,同时在建筑全生命周期(物料生产,建筑规划、设计、施工、运营维护及拆除过程)中实现高效率地利用资源(能源、土地、水资源、材料)、最低限度地影响环境的建筑物。绿色建筑也有人称之为生态建筑、可持续建筑。 一、发展节能与绿色建筑的重要意义 建筑作为人工环境,是满足人类物质和精神生活需要的重要组成部分。然而,人类对感官享受的过度追求,以及不加节制的开发与建设,使现代建筑不仅疏离了人与自然的天然联系和交流,也给环境和资源带来了沉重的负担。据统计,人类从自然界所获得的50%以上的物质原料用来建造各类建筑及其附属设施,这些建筑在建造与使用过程中又消耗了全球能源的50%左右;在环境总体污染中,与建筑有关的空气污染、光污染、电磁污染等就占了34%;建筑垃圾则占人类活动产生垃圾总量的40%;在发展中国家,剧增的建筑量还造成侵占土地、破坏生态环境等现象日益严重。中国正处于工业化和城镇化快速发展阶段,要在未来15年保持GDP年均增长7%以上,将面临巨大的资源约束瓶颈和环境恶化压力。严峻的事实告诉我们,中国要走可持续发展道路,发展节能与绿色建筑刻不容缓。 绿色建筑通过科学的整体设计,集成绿色配置、自然通风、自然采光、低能耗围护结构、新能源利用、中水回用、绿色建材和智能控制等高新技术,具有选址规划合理、资源利用高效循环、节能措施综合有效、建筑环境健康舒适、废物排放减量无害、建筑功能灵活适宜等六大特点。它不仅可以满足人们的生理和心理需求,而且能源和资源的消耗最为经济合理,对环境的影响最小。 胡锦涛同志指出:要大力发展节能省地型住宅,全面推广节能技术,制定并强制执行节能、节材、节水标准,按照减量化、再利用、资源化的原则,搞好资源综合利用,实现经济社会的可持续发展。温家宝和曾培炎同志也多次指出,建筑节能不仅是经济问题,而且是重要的战略问题。 发展节能与绿色建筑是建设领域贯彻“三个代表”重要思想和十六大精神,认真落实以人为本,全面、协调、可持续的科学发展观,统筹经济社会发展、人与

生物医学工程中英文对照外文翻译文献

(文档含英文原文和中文翻译) 中英文对照外文翻译文献 Biological effects of the Magnetic Stimulation on the T oad Heart Abstract-W e stimulated the exposed toad heart by a low frequency and high energy magnetic. By analyze the data of this experiment, it shows that the pulsating of the weak toad heart would make change after stimulated by magnetic. W eak heartbeat strengthened, the single peak curve would become the two peaks curve with atria wave and ventricle wave after the magnetic stimulation. But the cycling of rhythmic pulsatile curve of toad doesn't change. I. INTRODUTION All life forms have magnetism. All kinds of magnetic field would have some effects on the configuration and activities of life forms that whichever environmental magnetic, additional magnetic or inside magnetic of organism. The biologic effects are related to the characteristics and

中英文参考文献格式

中英文参考文献格式! (細節也很重要啊。。)来源:李菲玥的日志 规范的参考文献格式 一、参考文献的类型 参考文献(即引文出处)的类型以单字母方式标识,具体如下: M——专著C——论文集N——报纸文章J——期刊文章 D——学位论文R——报告S——标准P——专利 A——文章 对于不属于上述的文献类型,采用字母“Z”标识。 常用的电子文献及载体类型标识: [DB/OL]——联机网上数据(database online) [DB/MT]——磁带数据库(database on magnetic tape) [M/CD]——光盘图书(monograph on CD ROM) [CP/DK]——磁盘软件(computer program on disk) [J/OL]——网上期刊(serial online) [EB/OL]——网上电子公告(electronic bulletin board online) 对于英文参考文献,还应注意以下两点: ①作者姓名采用“姓在前名在后”原则,具体格式是:姓,名字的首字母. 如:Malcolm R ichard Cowley 应为:Cowley, M.R.,如果有两位作者,第一位作者方式不变,&之后第二位作者名字的首字母放在前面,姓放在后面,如:Frank Norris 与Irving Gordon应为:Norri s, F. & I.Gordon.; ②书名、报刊名使用斜体字,如:Mastering English Literature,English Weekly。二、参考文献的格式及举例 1.期刊类 【格式】[序号]作者.篇名[J].刊名,出版年份,卷号(期号):起止页码. 【举例】 [1] 周融,任志国,杨尚雷,厉星星.对新形势下毕业设计管理工作的思考与实践[J].电气电子教学学报,2003(6):107-109.

医学中文期刊英文刊名全称、缩写对照

首先,是我和我的小伙伴们:xx心血管杂志 Chinese Journal of Cardiovascular Medicine Chin J Cardiovasc Med xx神经免疫学和神经病学杂志 Chinese Journal of Neuroimmunology and Neurology Chin J Neuroimmunol Neurol 中华老年医学杂志 Chinese Journal of Geriatrics Chin J Geriatr A 癌症 Chinese Journal of Cancer Chin J Cancer 癌变·畸变·突变 Carcinogenesis, Teratogenesis & Mutagenesis Carcinog Teratogenesis Mutagen 癌症xx Cancer Rehabilitation Cancer Rehabil xx医学

Anhui Medical Journal Anhui Med J xx中医药大学学报 Journal of Anhui University of Chinese Medicine J Anhui Univ Chin Med B xx医学院学报 Journal of Bengbu Medical College J Bengbu Med Coll 包头医学 Journal of Baotou Medicine J Baotou Med xx医学 Beijing Medical Journal Beijing Med J xx中医药 Beijing Journal of Traditional Chinese Medicine Beijing J Tradit Chin Med 北京中医药大学学报 Journal of Beijing University of Traditional Chinese Medicine J Beijing Univ Tradit Chin Med

英文引用及参考文献格式要求

英文引用及参考文献格式要求 一、参考文献的类型 参考文献(即引文出处)的类型以单字母方式标识,具体如下: M——专著C——论文集N——报纸文章 J——期刊文章D——学位论文R——报告 对于不属于上述的文献类型,采用字母“Z”标识。 对于英文参考文献,还应注意以下两点: ①作者姓名采用“姓在前名在后”原则,具体格式是:姓,名字的首字母.如:MalcolmRichardCowley应为:Cowley,M.R.,如果有两位作者,第一位作者方式不变,&之后第二位作者名字的首字母放在前面,姓放在后面,如:FrankNorris与IrvingGordon应为:Norris,F.&I.Gordon.; ②书名、报刊名使用斜体字,如:MasteringEnglishLiterature,EnglishWeekly。 二、参考文献的格式及举例 1.期刊类 【格式】[序号]作者.篇名[J].刊名,出版年份,卷号(期号):起止页码. 【举例】 [1]王海粟.浅议会计信息披露模式[J].财政研究,2004,21(1):56-58. [2]夏鲁惠.高等学校毕业论文教学情况调研报告[J].高等理科教育,2004(1):46-52. [3]Heider,E.R.&D.C.Oliver.Thestructureofcolorspaceinnamingandmemo ryoftwolanguages[J].ForeignLanguageTeachingandResearch,1999,(3):62–6 7. 2.专著类 【格式】[序号]作者.书名[M].出版地:出版社,出版年份:起止页码. 【举例】[4]葛家澍,林志军.现代西方财务会计理论[M].厦门:厦门大学出版社,2001:42. [5]Gill,R.MasteringEnglishLiterature[M].London:Macmillan,1985:42-45. 3.报纸类 【格式】[序号]作者.篇名[N].报纸名,出版日期(版次). 【举例】 [6]李大伦.经济全球化的重要性[N].光明日报,1998-12-27(3). [7]French,W.BetweenSilences:AVoicefromChina[N].AtlanticWeekly,198 715(33). 4.论文集 【格式】[序号]作者.篇名[C].出版地:出版者,出版年份:起始页码. 【举例】 [8]伍蠡甫.西方文论选[C].上海:上海译文出版社,1979:12-17. [9]Spivak,G.“CantheSubalternSpeak?”[A].InC.Nelson&L.Grossberg(e ds.).VictoryinLimbo:Imigism[C].Urbana:UniversityofIllinoisPress,1988, pp.271-313.

平面设计中英文对照外文翻译文献

(文档含英文原文和中文翻译) 中英文翻译 平面设计 任何时期平面设计可以参照一些艺术和专业学科侧重于视觉传达和介绍。采用多种方式相结合,创造和符号,图像和语句创建一个代表性的想法和信息。平面设计师可以使用印刷,视觉艺术和排版技术产生的最终结果。平面设计常常提到的进程,其中沟通是创造和产品设计。 共同使用的平面设计包括杂志,广告,产品包装和网页设计。例如,可能包括产品包装的标志或其他艺术作品,举办文字和纯粹的设计元素,如形状和颜色统一件。组成的一个最重要的特点,尤其是平面设计在使用前现有材料或不同的元素。 平面设计涵盖了人类历史上诸多领域,在此漫长的历史和在相对最近爆炸视觉传达中的第20和21世纪,人们有时是模糊的区别和重叠的广告艺术,平面设计和美术。毕竟,他们有着许多相同的内容,理论,原则,做法和语言,有时同样的客人或客户。广告艺术的最终目标是出售的商品和服务。在平面

设计,“其实质是使以信息,形成以思想,言论和感觉的经验”。 在唐朝( 618-906 )之间的第4和第7世纪的木块被切断打印纺织品和后重现佛典。阿藏印在868是已知最早的印刷书籍。 在19世纪后期欧洲,尤其是在英国,平面设计开始以独立的运动从美术中分离出来。蒙德里安称为父亲的图形设计。他是一个很好的艺术家,但是他在现代广告中利用现代电网系统在广告、印刷和网络布局网格。 于1849年,在大不列颠亨利科尔成为的主要力量之一在设计教育界,该国政府通告设计在杂志设计和制造的重要性。他组织了大型的展览作为庆祝现代工业技术和维多利亚式的设计。 从1892年至1896年威廉?莫里斯凯尔姆斯科特出版社出版的书籍的一些最重要的平面设计产品和工艺美术运动,并提出了一个非常赚钱的商机就是出版伟大文本论的图书并以高价出售给富人。莫里斯证明了市场的存在使平面设计在他们自己拥有的权利,并帮助开拓者从生产和美术分离设计。这历史相对论是,然而,重要的,因为它为第一次重大的反应对于十九世纪的陈旧的平面设计。莫里斯的工作,以及与其他私营新闻运动,直接影响新艺术风格和间接负责20世纪初非专业性平面设计的事态发展。 谁创造了最初的“平面设计”似乎存在争议。这被归因于英国的设计师和大学教授Richard Guyatt,但另一消息来源于20世纪初美国图书设计师William Addison Dwiggins。 伦敦地铁的标志设计是爱德华约翰斯顿于1916年设计的一个经典的现代而且使用了系统字体设计。 在20世纪20年代,苏联的建构主义应用于“智能生产”在不同领域的生产。个性化的运动艺术在俄罗斯大革命是没有价值的,从而走向以创造物体的功利为目的。他们设计的建筑、剧院集、海报、面料、服装、家具、徽标、菜单等。 Jan Tschichold 在他的1928年书中编纂了新的现代印刷原则,他后来否认他在这本书的法西斯主义哲学主张,但它仍然是非常有影响力。 Tschichold ,包豪斯印刷专家如赫伯特拜耳和拉斯洛莫霍伊一纳吉,和El Lissitzky 是平面设计之父都被我们今天所知。 他们首创的生产技术和文体设备,主要用于整个二十世纪。随后的几年看到平面设计在现代风格获得广泛的接受和应用。第二次世界大战结束后,美国经济的建立更需要平面设计,主要是广告和包装等。移居国外的德国包豪斯设计学院于1937年到芝加哥带来了“大规模生产”极简到美国;引发野火的“现代”建筑和设计。值得注意的名称世纪中叶现代设计包括阿德里安Frutiger ,设计师和Frutiger字体大学;保兰德,从20世纪30年代后期,直到他去世于1996年,采取的原则和适用包豪斯他们受欢迎的广告和标志设计,帮助创造一个独特的办法,美国的欧洲简约而成为一个主要的先驱。平面设计称为企业形象;约瑟夫米勒,罗克曼,设计的海报严重尚未获取1950年代和1960年代时代典型。 从道路标志到技术图表,从备忘录到参考手册,增强了平面设计的知识转让。可读性增强了文字的视觉效果。 设计还可以通过理念或有效的视觉传播帮助销售产品。将它应用到产品和公司识别系统的要素像标志、颜色和文字。连同这些被定义为品牌。品牌已日益成为重要的提供的服务范围,许多平面设计师,企业形象和条件往往是同时交替使用。

医学护理中英文对照外文翻译文献word版

医学护理中英文对照外文翻译文献 宗教信仰在应对乳腺癌患者以后生活中的作用 目的: 识别并检查新诊断为乳腺癌的老年患者中是否存在宗教和精神应对策略现象。 方法: 一个简易样本,由被招募来进行为期6个月的诊断的33名65岁女性组成。受访者被要求参加一个会提出灵活性问题的结构式访谈。访谈的誊本由三名研究人员各自独立分析讨论其主题,直至达成共识。 结果: 参加者的宗教背景为:17名新教徒,五,六名犹太人,天主教和另外四个其它教徒。她们在出席宗仪式的频率上存在着很大的不同。而在健康危机期她们的宗教和/或精神信仰或增加或保持不变。誊本分析显示出了三个主题。宗教和宗教信仰

为受访者提供了必要的情感支持(91%)、社会支持(70%)来面对她们的乳腺癌,以及赋予了她们一些使日常生活变得有意义的能力,特别是癌症经验(64%)。 结论: 宗教和宗教信仰为新诊断为乳腺癌的老年女性患者提供了一些重要的应对这些疾病的方法,这些方法也得到了诊断医生的认可。这可能对于鼓励这些患者寻求宗教的支持和/或重新与她们的宗教团体再结合是非常重要的。 引言 一个关于乳腺癌的新的诊断已被证实对女性有重大的影响(格里,1979;琼斯和格林伍德1994;罗兰和马西,1996分;安徒生,1998)。在老年妇女中,乳腺癌是最常见的癌症,其影响还会因为人口老龄化继续上升。更好的了解老年妇女如何应对乳腺癌可以使人们更好的增强功能和改善生活质量。 最近日益让人们产生浓厚兴趣的是,宗教或信仰在患者对乳腺癌的反应中所扮演的角色。 在这些老年人中,宗教经常可以帮助她们缓解生理疾病中的固有压力,比如那些伴随着医师会诊、治疗及其它事件所产生的相关压力(包括罗斯,1982;考恩威博士(1985 - 1986);曼弗雷德和皮克特,1987)。

统计学中英文对照外文翻译文献

中英文对照翻译 (文档含英文原文和中文翻译) Policies for Development of Iron and Steel Industry The iron and steel industry is an important basic industry of the national economy, a supporting industry for realizing the industrialization and an intensive industry in technologies, capital, resources and energy, and its development requires a comprehensive balancing of all kinds of external conditions. China is a big developing country with a comparatively big demand of iron and steel in the economic development for a long time to go. China's production capacity of iron and steel has ranked the first place in the world for many years. However, there is a large gap in terms of the technological level and material consumption of the iron and steel industry compared with the international advanced level, so the focus of development for the future shall be put on technical upgrading and structural adjustment. In order to enhance the whole technical level of the iron and steel industry, promote the structural adjustment, improve the industrial layout, develop a recycling economy, lower the consumption of materials and energy, pay attention to the environmental protection, raise the comprehensive competitive capacity of enterprises, realize the industrial upgrading, and develop the iron and steel industry into an industry with

卓顶精文2019医学文献翻译(中英对照)

Currentusageofthree-dimensionalcomputedtomographyan giographyforthediagnosisandtreatmentofrupturedcereb ralaneurysms KenichiAmagasakiMD,NobuyasuTakeuchiMD,TakashiSatoMD,Toshiyu kiKakizawaMD,TsuneoShimizuMDKantoNeurosurgicalHospital,Kuma gaya,Saitama,Japan SummaryOurpreviousstudysuggestedthat3D-CTangiographycou ldreplacedigitalsubtraction(DS)angiographyinmostcasesofrupt uredcerebralaneurysms,especiallyintheanteriorcirculation.Th isstudyreviewedourfurtherexperience.Onehundredandfiftypatie ntswithrupturedcerebralaneurysmsweretreatedbetweenNovember1 998andMarch20XX.Only3D-CTangiographywasusedforthepreoperati vework-upstudyinpatientswithanteriorcirculationaneurysms,un lesstheattendingneurosurgeonsagreedthatDSangiographywasrequ ired. Both3D-CTangiographyandDSangiographywereperformedinpati entswithposteriorcirculationaneurysms,exceptforrecentcasest hatwerepossiblytreatedwith3D-CTangiographyalone.Onehundreds ixteen(84%)of138patientswithrupturedanteriorcirculationaneu rysmsunderwentsurgicaltreatment,butadditionalDSangiographyw asrequiredin22cases(16%).Onlytworecentpatientsweretreatedsu rgicallywith3D-CTangiographyalonein12patientswithposteriorc irculationaneurysms.Mostpatientswithrupturedanteriorcircula tionaneurysmscouldbetreatedsuccessfullyafter3D-CTangiograph yalone.However,additionalDSangiographyisstillnecessaryinaty picalcases.3D-CTangiographymaybelimitedtocomplementaryusein patientswithrupturedposteriorcirculationaneurysms. a20XXElsevierLtd.Allrightsreserved. Keywords:3D-CTangiography,cerebralaneurysm,subarachnoidhaem orrhage,surgery INTRODUCTION Recently,three-dimensionalcomputedtomography(3D-CT)angiogra phyhasbecomeoneofthemajortoolsfortheidentificationofcerebra laneurysmsbecauseitisfaster,lessinvasive,andmoreconvenientt hancerebralangiography.1– 7Patientswithrupturedaneurysmscouldbetreatedunderdiagnosesb asedononly3D-CTangiography.5;63D-CTangiographyhassomelimita tionsforthepreoperativework-upforrupturedcerebralaneurysms,

中英文论文参考文献范例

https://www.doczj.com/doc/be9573443.html, 中英文论文参考文献 一、中英文论文期刊参考文献 [1].面向中英文混合环境的多模式匹配算法. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2008年3期.孙钦东.黄新波.王倩. [2].基于自适应特征与多级反馈模型的中英文混排文档分割. 《自动化学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2006年3期.夏勇.王春恒.戴汝为. [3].基于最大熵方法的中英文基本名词短语识别. 《计算机研究与发展》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI 收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2003年3期.周雅倩.郭以昆.黄萱菁.吴立德. [4].中英文指代消解中待消解项识别的研究. 《计算机研究与发展》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI 收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2012年5期.孔芳.朱巧明.周国栋. [5].基于树核函数的中英文代词消解?. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2013年5期.孔芳.周国栋. [6].基于树核函数的中英文代词消解. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2012年5期.孔芳.周国栋. [7].一种并行中英文混合多模式匹配算法. 《计算机工程》.被中信所《中国科技期刊引证报告》收录ISTIC.被北京大学《中文核心期刊要目总览》收录PKU.2014年4期.王震.李仁发.李彦彪.田峥. [8].中英文混合文章识别问题. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2005年5期.王恺.王庆人.

教育类的中英文文献对照

对菲律宾学校辅导员学习观的探索 艾伦 B.I.贝尔纳多著 [摘要]学生学习改革是学校改革的重中之重,辅导员在学生的学习和进步中起着推动作用.然而,辅导员对学习过程有着怎样的理解呢?在这个研究中,我们调查了115个菲律宾学校的辅导员.就学习过程和影响学习的因素,他们对42个州的看法和做法表明了态度.一个对42个州的回应分析报告阐释了三个因素:(F1)社会认知构建主义,(F2)以教师或课程为中心的行为主义,(F3)个别差异.研究的主要成果是菲律宾学校辅导员的学习观对引导并促进学生的学习和进步起着很大影响. [关键词]学习观,学习概念,学校辅导员,学生学习,菲律宾 世界上许多不同地区的学校改革都将重点放在学生学习上.特别是,大多数学校改进项目都将学生能接受高质量的教育和技能作为自己的目标,以帮助学生活跃于当今竞争激烈的全球经济社会(如:Lee & Williams, 2006).在这方面,学校改革项目吸取了当代一些学习理论和研究(如:Bransford, Brown, & Cocking, 1999; Lambert & McCombs, 1998).其中中心思想是学校改进的重点应致力于保证学生高质量的学习或接受有明确目标和标准的课程.例如,教科书(Chien & Young, 2007),计算机与教育技术(Gravoso, 2002; Haertnel & Means, 2003; Technology in Schools Task Force, 2003),教育评估体系(Black & Wiliam, 2004; Cheung & Ng, 2007; Clark, 2001; Stiggins, 2005)被重新考虑,因为这些支撑性的技术和资料影响着学生学习的进步.同样地,学校财政资源的管理和分配也被评估,以验证它们是否被充分调动起来促进学生学习.(Bolam, 2006; Chung & Hung, 2006; Retna, 2007) 从这方面来说,一些支持者号召在改革中对学校辅导员进行测试(Herr, 2002).在美国,House and Hays (2002) 提出学校辅导员在引导学生进步中应扮演积极的领导角色.与此同时,美国学校辅导员协会在1997年倡导,“学校辅导员计划视是为了促进和加强学习过程”.为了回应这个提议,一些人推荐了所谓的最好办法,让学校辅导员全面参与到促进学生学习中来.(如:Rowell & Hong, 2002; Sink, 2005). 提高学生的学习也是菲律宾学校改革的主题之一(Bernardo & Garcia, 2006; Bernado & Mendoza, 2009).然而,尽管学校辅导员在学生学习中的作用引起人们的

医学中文期刊英文刊名全称、缩写对照

首先,是我和我的小伙伴们: 中国心血管杂志 Chinese Journal of Cardiovascular Medicine Chin J Cardiovasc Med 中国神经免疫学和神经病学杂志 Chinese Journal of Neuroimmunology and Neurology Chin J Neuroimmunol Neurol 中华老年医学杂志 Chinese Journal of Geriatrics Chin J Geriatr A 癌症 Chinese Journal of Cancer Chin J Cancer 癌变·畸变·突变 Carcinogenesis, Teratogenesis & Mutagenesis Carcinog Teratogenesis Mutagen 癌症康复 Cancer Rehabilitation Cancer Rehabil 安徽医学 Anhui Medical Journal Anhui Med J 安徽中医药大学学报 Journal of Anhui University of Chinese Medicine J Anhui Univ Chin Med B 蚌埠医学院学报 Journal of Bengbu Medical College J Bengbu Med Coll 包头医学 Journal of Baotou Medicine J Baotou Med

北京医学 Beijing Medical Journal Beijing Med J 北京中医药 Beijing Journal of Traditional Chinese Medicine Beijing J Tradit Chin Med 北京中医药大学学报 Journal of Beijing University of Traditional Chinese Medicine J Beijing Univ Tradit Chin Med 北京大学学报(医学版) Journal of Peking University(Health Sciences) J Peking Univ Health Sci 北京生物医学工程 Beijing Biomedical Engineering Beijing Biomed Eng 标记免疫分析与临床 Labeled Immunoassays and Clinical Medicine Labeled Immunoassays & Clin Med 病毒学报 Chinese Journal of Virology Chin J Virol C 长春中医药大学学报 Journal of Changchun University of Traditional Chinese Medicine J Changchun Univ Tradit Chin Med 重庆医学 Chongqing Medicine Chongqing Med J 成都中医药大学学报 Journal of Chengdu University of Traditional Chinese Medicine J Chengdu Univ Tradit Chin Med D 第一军医大学分校学报 Journal of Branch Campus of the First Military Medical University

相关主题
文本预览
相关文档 最新文档