11mm x 1.4mm BACKLIGHT
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No.
Dice
Lens Type
Iv (mcd) @ 20mA Viewing Angle Min.
Typ.2θ1/2AA1114/2SYC/CC SUPER BRIGHT YELLOW (InGaAIP)WATER CLEAR 50
100
120°
Electrical / Optical Characteristics at T A =25°C
Absolute Maximum Ratings at T A =25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Symbol Parameter Device Typ.Max.
Test Conditions
Units λpeak Peak Wavelength Super Bright Yellow 590nm I F =20mA λD Dominant Wavelength Super Bright Yellow 588nm I F =20mA ?λ1/2Spectral Line Half-width
Super Bright Yellow 28nm I F =20mA C Capacitance Super Bright Yellow 25pF V F =0V;f=1MHz V F Forward Voltage Super Bright Yellow 2.0
2.5V I F =20mA I R
Reverse Current
Super Bright Yellow
10uA
V R = 5V
Parameter Super Bright Yellow
Units Power dissipation 125mW DC Forward Current 30mA Peak Forward Current [1]150mA Reverse Voltage
5
V
Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2]260°C For 3 Seconds Lead Solder Temperature [3]
260°C For 5 Seconds