CREATED 2006/02/14
UPDATED 2006/04/14
Material Safety Data Sheet
1. Chemical Product and Company Identification
Product name : "Lumirror"T60,T60C,T61,T62,T63,T6AM etc
P60,P60S,P60M,P60C,P425,F65,F65S,F60,F10,F11,F14,F67,F68,Q21,Q21K,
F53,F57,F53N,F57N,T60,T60C,T60K,T61,T62,T63,T64K,T67,T6AM,T56,T70,
T70M,T70A,T705,T75,QZ18,S10,S10C,S10K,S10V,S12,S14,S15,S155,S16,
S19M,S23,S24,S27,S28,S28M,S28U,S28K,S56,S105,S106,S0EE,S027S31E,
S31W,C30,W10,X44,X43,X42,X42T,FN1,R75,R76,R76C,R7N,P025,P52,
P525,F39,P51D,P51C,S15A,S103,F99
Name of supplier : Toray Industries, Inc.
Address :
Toray building,2-1,Nihonbashi-Muromachi 2-chome,Chuo-ku,Tokyo 103-8666 Sales Department :
Film Division Films Trading Dept.
Film Division Industrial Films 1st Dept.
Film Division Industrial Films 2nd Dept.
IT Film products Dept.
Manager of Sales Department : General Manager
Telephone number : +81-3-3245-5471/5530
FAX number : +81-3-3245-5523/5574
Technical Department :
Gifu Film Technical Dept.
Manager of Technical Department : Department Manager
Phone No. : +81-584-27-1628/1629
Product No.(MSDS No.) : D3E-FTG131-2
2. Composition/Information on Ingredients
Chemical name :
Polyethylene terephtalate film
Synonyms : Polyester film, PET film
Substance/Mixture : Mixture
Common chemical name
Polyethylene terephtalate
Composition : >98
Chemical formula(Constitutional/Structural formula)
(C10H8O4)n
CAS No. : 25038-59-9
TSCA : Registered
3. Hazards Identification
Summary of most important information on hazards :
Does not present any particular hazard under normal conditions of use.
Adverse human health effects :
Molten polymer at high temperature generates the stimulus decomposed gas.
Physical and Chemical hazards :
Ignition temperature is at/over 483 degrees C.
May form flammable/explosive dust-air mixture.
Specific dager/hazard :
Molten polymer at high temperature generates the stimulus decomposed gas.
4. First-Aid Measures
Inhalation :
Move the victim to the fresh air when inhales the gas decomposed from
molten polymer or burning. Medical check if still feel bad.
Skin contact :
Cool down affected area immediately with plenty of water if contact the molten
polymer. Do not remove the resin if stucking to the skin, and seek medidal
advice.
Eye contact :
S26-In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Have the victim remove contact lenses if he is wearing them and continue rinsing.
Do not let the victim rub his eyes.
Ingestion :
Induce vomit. Seek medical advice.
5. Fire-Fighting Measures
Extinguishing Media :
Use extinguishing media appropriate to surrounding fire conditions.
Specific Hazards with regard to Fire-Fighting Measures :
During a fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion.
Specific fire-fighting measures :
Evacuate non-essential personnel to safe area.
Protection of fire-fighters :
Firefighters should wear self-contained breathing apparatus with full face peace
operated positive pressure mode.
6. Accidental Release Measures
Measures for Handling Personnel :
Wear proper protective equipment.
Measures for environmental effects :
Not applicable
Measures when handling spilled substances :
Avoid raising dust.
7. Handling and Storage
Handling :
Preventive measures :
Exposure control for handling personnel :
S22-Do not breathe dust.
Do not breathe the decomposed gas from the molten polymer or the resin burning.
Protective measures against fire & explosion :
S33-Take precautionary measures against static discharges.
Safety treatments :
Prevent deposition of dust.
Safety Measures/Incompatibility :
Avoid rough handling or dropping.
Storage :
Recommendation for storage :
No specific attention during storage.
Incompatible storage condition :
S16-Keep away from sources of ignition -No smoking.
Recommendation on container and packaging materials :
No specific container is designated.
8. Exposure Control/Personal Protection
Engineering measures :
Use static eliminator against static charge.
Personal protective equipment :
Respiratory protection :
No specific breathing apparatus is needed.
Hand protection :
No glove is needed.
Eye protection :
No specific eye protection is needed.
Skin and body protection :
No skin protection is needed.
9. Physical and Chemical Properties
Physical properties :
Appearance : solid
Color : Colorless
Odor : None
Phase change temperature :
Boiling point : None
Melting point : 255-265?C
Flash point : 346-399?C
Ignition temperature : 483-488?C
Explosion :
None
Vapour pressure : None
Vapour density : None
Density : 1.3-1.4
Solubility :
Solubility as solvent :
Insoluble in water.
10.Stability and Reactivity
Stability :
This product is considered a stable material under normal and anticipated storage and handling conditions.
Reactivity :
Stable under normal condition of storage and use.
Incompatibility :
Bases
Hydrolyzed by bases.
Decomposition products :
Not applicable.
11. Toxicological Information
Acute toxicity :
No data to be listed.
Effects on skin, eyes and others :
The film does not affect on skin and eyes. The decomposed gas from
molten resin at high temperature stimulates eyes.
Allergenic and/or sensitizing effects :
No data to be listed.
Mutagenic effects :
No data to be listed.
12. Ecological Information
Biotransportability :
None
Biodegradability :
The products persists in the soil.
Bioaccumulation :
None
Ecological toxicity :
None
Fish toxicity :
None
13. Disposal Consideration
To follow local regulations regarding disposal.
14. Transport Information
International guide line :
Not applicable.
Specific safety measures and conditions on transport :
Keep at dry place to prevent from carton box crushes by wetting.
Do not give a shock.
15. Regulatory Information
FDA
conformable
Other regulatory information :
Ensure this material in compliance with federal requirements and ensure
conformity to local regulations.
16. Other Information/References
Other information :
This information contained in this data sheet represents the best information currently available to us. However, no warranty is made with respect to its
completeness and we assume no liability resulting from its use. It are advised to make their own tests to determinate the safety and suitalility of each such product or combination for their own purposes.