毕业设计论文
外文资料原文及译文
学院：机电工程学院
专业：机械设计制造及其自动化班级：
学号：
姓名：
Mechanical engineering
1.The porfile of mechanical engineering
Engingeering is a branch of mechanical engineerig,it studies mechanical and power generation especially power and movement.
2.The history of mechanical engineering
18th century later periods,the steam engine invention has provided a main power fountainhead for the industrial revolution,enormously impelled each kind of mechznical biting.Thus,an important branch of a new Engineering – separated from the civil engineering tools and machines on the branch-developed together with Birmingham and the establishment of the Associantion of Mechanical Engineers in 1847 had been officially recognized.The mechanical engineering already mainly used in by trial and error method mechanic application technological development into professional engineer the scientific method of which in the research,the design and the realm of production used .From the most broad perspective,the demend continuously to enhance the efficiencey of mechanical engineers improve the quality of
work,and asked him to accept the history of the high degree of education and training.Machine operation to stress not only economic but also infrastructure costs to an absolute minimun.
3.The field of mechanical engineering
The commodity machinery development in the develop country,in the high level material life very great degree is decided each kind of which can realize in the mechanical engineering.Mechanical engineers unceasingly will invent the machine next life to produce the commodity,unceasingly will develop the accuracy and the complexity more and more high machine tools produces the machine.The main clues of the mechanical development is:In order to enhance the excellent in quality and reasonable in price produce to increase the precision as well as to reduce the production cost.This three requirements promoted the complex control system development.The most successful machine manufacture is its machine and the control system close fusion,whether such control system is essentially mechanical or electronic.The modernized car engin production transmission line(conveyer belt)is a series of complex productions craft mechanization
very good example.The people are in the process of development in order to enable further automation of the production machinery ,the use of a computer to store and handle large volumes of data,the data is a multifunctional machine tools necessary for the production of spare parts.One of the objectives is to fully automated production workshop,three rotation,but only one officer per day to operate.The development of production for mechanical machinery must have adequate power supply.Steam engine first provided the heat to generate power using practical methods in the old human,wind and hydropower,an increase of engin .New mechanical engineering industry is one of the challenges faced by the initial increase thermal effciency and power,which is as big steam turbine and the development of joint steam boilers basically achieved.20th century,turbine generators to provide impetus has been sustained and rapid growth,while thermal efficiency is steady growth,and large power plants per kW capital consumption is also declining.Finally,mechanical engineers have nuclear energy.This requires the application of nuclear energy particularly high reliability and security,
which requires solving many new https://www.doczj.com/doc/948567276.html,rge power plants and the nuclear power plant control systems have become highly complex electroonics,fluid,electricity,water and mechanical parts networks All in all areas related to the mechanical engineers.Small internal combustion engine,both to the type (petrol and diesel machines)or rotary-type(gas turbines and Mong Kerr machine),as well as their broad application in the field of transport should also due to mechanical enginerrs.Throughout the transport,both in the air and space,or in the terrestrial and marine,mechanial engineers created a variety of equipment and power devices to their increasing cooperation with electrical engineers,especially in the development of appropration control systems.Mechanical engineers in the development of military weapons technology and civil war ,needs a similar,though its purpose is to enhance rather than destroy their productivity.However.War needs a lot of resources to make the area of techonlogy,many have a far-reaching development in peacetime efficiency.Jet aircraft and nuclear reactors are well known examples.
The Biological engineering,mechanical engineering biotechnology is a relatively new and different areas,it provides for the replacement of the machine or increase the
body functions as well as for medical equipment.Artficial limbs have been developed and have such a strong movement and touch response function of the human body.In the development of artificial organ transplant is rapid,complex cardiac machines and similar equipment to enable increasingly complex surgery,and injuries and ill patients life functions can be sustained.Some enviromental control mechanical engineers through the initial efforts to drainage or irrigation pumping to the land and to mine and ventilation to control the human environment.Modern refrigeration and air-conditioning plant commonaly used reverse heat engine,where the heat from the engine from cold places to more external heat.Many mechanical engineering products,as well as other leading technology development city have side effects on the environment,producing noise,water and air pollution caused,destroyed land and landscape.Improve productivity and diver too fast in the commodity,that the renewable natural
forces keep pace.For mechanical engineers and others,environmental control is rapidly developing area,which includes a possible development and production of small quantities of pollutants machine sequnce,and the development of new equipment and teachnology has been to reduce and eliminate pollution.
4.The role of mechanical engineering
There are four generic mechanical engineers in common to the above all domains function.The 1st function is the understanding and the research mechanical science foundation.It includes the power and movement of the relationship dynamics For example,in the vibration and movement of the relationship;Automatic control;Study of the various forms of heart,energy,power relations between the thermodynamic;Fluidflows; Heat transfer; Lubricant;And material properties.The 2nd function will be conducts the research,the desing and the development,this function in turn attempts to carry on the essential change to satisfy current and the future needs.This not only calls for a clear understanding of mechanical science,and have to break
down into basic elements of a complex system capacity.But also the need for synthetic and innovative inventions.The 3rd function is produces the product and the power,include plan,operation and maintenance.Its goal lies in the maintenance either
enhances the enterprise or the organization longer-tern and survivabilaty prestige at the same time,produces the greatest value by the least investments and the consumption.The 4th function is mechanical engineer’s coordinated function,including the management,the consultation,as well as carries on the market marking in certain situation.
In all these function,one kind unceasingly to use the science for a long time the method,but is not traditional or the intuition method tendency,this is a mechanical engineering skill aspect which unceasingly grows.These new rationalization means typical names include:The operations research,the engineering economics,the logical law problem analysis(is called PABLA) However,creativity is not rationalization.As in other areas,in mechanical engineering,
to take unexpected and important way to bring about a new capacity,still has a personal,marked characteristice.
5.The design of mechanical engineering
The design of mechanical is the design has the mechanical property the thing or the system,such as:the instrument and the measuring appliance in very many situations,the machine design must use the knowledge of discipline the and so on mathematics,materials science and mechanics.
Mechanical engineering desgin includeing all mechanical desgin,but it was a study,because it also includes all the branches of mechsnical engineering,such as thermodynamics all hydrodynamics in the basic disciplines needed,in the mechanical engineering design of the initial stude or mechanical design.Design stages.The entire desgin process from start to finish,in the process,a demand that is designed for it and decided to do the start.After a lot of repetition,the final meet this demand by the end of the design procees and the plan.Design considerations.Sometimes in a system is to decide which parts needs intensity parts of geometric shapes
and size an important factor in this context that we must consider that the intensity is an important factor in the design.When we use expression design considerations,we design parts that may affect the entire system design features.In the circumstances specified in the design,usually for a series of such functions must be taken into account.Howeever,to correct purposes,we should recognize that,in many cases the
design of important design considerations are not calculated or test can determine the components or systems.Especially students,wheen in need to make important decisions in the design and conduct of any operation that can not be the case,they are often confused.These are not special,they occur every day,imagine,for example,a medical laboratory in the mechanical design,from marketing perspective,people have high expectations from the strength and relevance of impression.Thick,and heavy parts installed together:to produce a solid impression machines.And sometimes machinery and spare parts from the design style is the point and not the other point of view.Our purpose is to make those you do not be misled to believe that every design decision will need
reasonable mathematical methods.
Manufacturing refers to the raw meterials into finished products in the enterprise.Create three distinct phases.They are:input,processing exprot.The first phase includes the production of all products in line with market needs essential.First there must be the demand for the product,the necessary materials,while also needs such as energy,time,human knowledge and technology resourcess .
Finall,the need for funds to obtain all the other resources. Lose one stage after the second phase of the resources of the processes to be distributed.Processing of raw materials into finished products of these processes.To complete the design,based on the design,and then develop plans.Plan implemented through various production processes.Management of resources and processes to ensure efficiency and productivity.For example,we must carefully manage resources to ensure proper use of funds.Finally,people are talking about the product market was cast.Stage is the final stage of exporting finished or stage.Once finished just purchased,it must be delivered to the users.According to product performance,installation and may have to conduct further debugging in addition,some products,especially those very complex products User training is necessary.
6.The processes of materials and maunfacturing
Here said engineering materials into two main categories:metals and non-ferrous,high-performance alloys and power metals.Non-metallic futher divided into plastice,synthetic rubber,composite materials and ceramics.It said the production
proccess is divided into several major process,includingshape,forging,casting/ founding,heat treatment,fixed/connections ,measurement/ quality control and materal cutting.These processes can be further divide into each other’s craft.Various stages of the development of the manufacturing industry Over the years,the manufacturing process has four distinct stages of development, despite the overlap.These stages are:The first phase is artisanal,the second Phase is mechanization.The third phase is automation the forth Phase is integrated.
When mankind initial processing of raw materials into finished products will be,they use manual processes.Each with their hands and what are the tools manuslly produced.This is totally integrated production take shape.A person needs indentification,collection materials,the design of a product to meet that demand,the production of such products and use it.From beginning to end,everything is focused on doing the work of the human https://www.doczj.com/doc/948567276.html,ter in the industrial revolution introduced mechanized production process,people began to use machines to complete the work accomplished previously manual. This led to the specialization.Specialization in turn reduce the manufacture of integrated factors.In this stage of development,manufacturing workers can see their production as a whole represent a specific piece of the part of the production process.One can not say that their work is how to cope with the entire production process,or how they were loaded onto a production of parts finished.Development of manufacting processes is the next phase of the selection process automation.This is a computer-controlled machinery and processes.At this stage,automation island began to emerge in the workshop lane.Each island represents a clear production process or a group of processes.Although these automated isolated island within the island did raise the productivity of indivdual processes,but the overall productivity are often not change.This is because the island is not caught in other automated production process middle,but not synchronous with them .The ultimate result is the efficient working fast parked through automated processes,but is part of the stagnation in wages down,causing bottlenecks.To better understand this problem,you can imagine the traffic in the peak driving a red light from the red Service Department to the next scene. Occasionally you will find a lot less cars,more than being slow-moving vehicles,but the results can be found by the
next red light Brance.In short you real effect was to accelerate the speed of a red Department obstruction offset.If you and other drivers can change your speed and red light simultaneously.Will advance faster.Then,all cars will be consistent,sommth operation,the final everyone forward faster.In the workshop where the demand for stable synchronization of streamlined production,and promoted integration of manufacturing development.This is a still evolving technology.Fully integrated in the circumstances,is a computer-controllrd machinery and processing.integrated is completed through computer.For example in the preceding paragraph simulation problems,the computer will allow all road vehicles compatible with the change in red.So that everyone can steady traffic.
Scientific analysis of movement,timing and mechanics of the disciplines is that it is composed of two pater:statics and dynamics.Statics analyzed static system that is in the system,the time is not taken into account,research and analysis over time and dynamics of the system change.Dynameics from the two componets.
Euler in 1775 will be the first time two different branches: Rigid body movement studies can conveniently divided into two parts:geometric and mechanics.The first part is without taking into account the reasons for the downward movement study rigid body from a designated location to another point of the movement,and must use the formula to reflect the actual,the formula would determine the rigid body every point position. Therefore,this study only on the geometry and,more specifically,on the entities from excision.Obviously,the first part of the school and was part of a mechanical separation from the principles of dynamics to study movement,which is more than the two parts together into a lot easier.Dynamics of the two parts are subsequently divided into two separate disciplines,kinematic and dynamics,a study of movement and the movement strength.Therefore,the primary issue is the design of mechanical systems understand its kinematic.Kinematic studies movement,rather than a study of its impact.In a more precise kinematic studies position,displacement,rotation, speed,velocity and acceleration of disciplines,for esample,or planets orbiting research campaing is a paradigm.
In the above quotation content should be pay attention that the content of the Euler dynamics into kinematic and rigid body dynamics is based on the assumption
that they are based on research.In this very important basis to allow for the treatment of two separate disciplines.For soft body,soft body shape and even their own soft objects in the campaign depends on the role of power in their possession.In such cases,should also study the power and movement,and therefore to a large extent the analysis of the increased complexity.Fortunately, despite the real machine parts may be involved are more or less the design of machines,usually with heavy material designed to bend down to the lowest parts.Therefore,when the kinematic analysis of the performance of machines,it is often assumed that bend is negligible,spare parts are hard,but when the load is known,in the end analysis engine,re-engineering parts to confirm this assnmption.
机械工程
1.机械工程简介
机械工程是工程学的一个分支，它研究机械和动力的产，尤其是力和动力。
2.机械工程的历史
18世纪后期，蒸汽机的发明为工业革命提供了一个主要的能量，它极大地推动了各种机械的发展。这样，一个新的工程学的重要分支—从民用工程学中分离出来的关于工具和机器的分支就发展了起来，并随着在1847年英国伯明翰机械工程师协会的建立得到了正式承认。机械工程已经由一门主要用于技工应用的技术发展成为专业工程师在研究、设计和生产领域中使用的科学方法。从最广义的角度讲，增进效率的需求不断地促使机械工程师提高工作质量，并要求他接受中高程度的教育和训练。不仅机器运转要讲求经济，而且基建费也要降到最低。
3.机械工程的领域
商品机械的发展在发达国家中，高水平的物质生活很大程度上取决于机械工程中得以实现的各种机械。机械工程师们不断地发明机器来生产商品，不断的开发精确性和复杂性越来越高的机械工具来生产机器。机械发展的主要线索是：为提高生产率而增加机器的运转速度、为获得物美价廉的产品而提高精度以及降低生产成本。这3个要求促进了复杂的控制系统的发展。最成功的机械制造是其机器的机械设计能与控制系统紧密融合，不论这种控制系统从本质上是机械的还是电子的。现代化的汽车发动机生产传送线（传动带）就是一系列复杂的生产工艺机械化的很好例子。人们正在着手开发以使机械生产进一步自动化，利用计算机来存储和处理大量数据，这些数据是少量多功能机床生产多种零件所必须的。其中一个目标就是使批量生产车间完全自动化，三班轮换，但每天只需一班人员来操作。动力机械的发展生产机械必须先有充足的动力供应。蒸汽机最先提供了用热能来产生动力的实际可行的方法，在旧有的人力、风力和水力之外增加了动力源。新的机械工程业面临的最初挑战之一就是增加热效率和动力，这一点随着蒸汽涡轮机和大的联合蒸汽锅炉的发展而基本实现了。20世纪，涡轮机为发电机提供的动力得到了持续快速的增长，同时热效率也在
稳定增长，而且大电站每千瓦的资本消耗也在下降。最后，机械工程师们获得了核能源。这种核能源的应用需要有特别高的可靠性和安全性，这就需要解决许多全新的问题。大型电厂和整个核电站的控制系统已变成高度复杂的电子、流体、电、水力和机械零件的网络这一切都涉及到机械工程师的所有学术领域。小型的内燃机，不论是往复式（汽油机和柴油机）还是旋转式（燃气轮机和旺克尔机），以及它们在运输领域的广泛应用也都要归功于机械工程师们。在整个运输业，不论是在空中和太空，还是在陆地和海洋，机械工程师创造了各种设备和动力装置，他们越来越多的与电气工程师合作，尤其是在开发适合的控制系统方面。军用武器的开发机械工程师应用于战争的技术与民用中需要的类似，尽管其目的是增强毁坏力而不是提高生产率。然而，战争的需要使得大量的资源用于技术领域，很多发展在和平时期有着深远的效益。喷气式飞机和核反应堆就是众所周知的例子。
生物工程是机械工程中的一个相对新的领域，它用来替换或增加人体功能的机器和进行医疗的设备。人造肢体已被开发出来，并且具有诸如有力的运动和触摸反应等人体功能。在人工器官移植手术方面的发展史迅速的，复杂的心肺机器和类似的设备使越来越复杂的手术得以进行，并使受重伤和重病病人的生命功能得以持续。环境控制机械工程师的一些最初的努力是要通过抽水来排涝或灌溉土地以及给矿井通风来控制人类的环境。现代的制冷和空调厂普遍采用反向的热引擎，在这些地方动力吧热从冷的地方抽出送到更热的外部。很多机械工程的产品以及其他领域的技术发展对环境有副作用，产生了噪音，引起了水和空气的污染，破坏了土地和风景。商品和动力的生产率提高太快，以至于自然力的再生跟不上步伐。对于机械工程师和他人来说，环境控制是一个快速发展的领域，它包括开发尽可能产生少量污染物的机器和生产上序，以及开发新的设备和技术来减少和消除已造成的污染。
4.机械工程的作用
机械工程师有四个上述所有领域的作用。第1个作用是理解和研究机械科学的基础。它包括涉及力和运动的关系的动力学。比如在在震动中的力和运动的关系；自动控制；研究各种形式的热、能量、动力之间关系的热力学；流体流动；热传递；润滑；和材料特性。第2个作用是依次地进行研究、设计和开发、该作用试图进行必要的改变以满足当前和将来的需要。这一工作不仅要求
对机械科学有
一个清楚的了解，并且有把复杂系统分解成基本因素的能力。而且还需要有创新性来进行人工合成和发明。第3个作用是生产产品和动力，包括计划、运作和维护。其目的在于维护或提高企业或机构的较长期的和生存能力声誉的同时，以最少的投资和消耗生产出最大的价值。第4个作用是机械工程师的协调作用，包括管理、咨询、以及在某些情况下进行市场营销。
在所有这些作用中，体现出一种长期不断地使用科学的方法，而不是传统的或直觉的方法，这是不断成长的机械工程专门技术的一个方面。这些新的合理化方法的典型名称有：运筹学、工程经济学、逻辑法问题分析（简称PABLA）。然而，创造性是无法合理化的。正如在其他领域一样，在机械工程中，能够采取重要的出人意料的并能开创出新方法的能力，仍然具有个人的、即兴的特点。
5.机械工程设计
机械设计是设计具有机械性质的事物或系统，如：各种机器、产品、结构、器械和仪表在很多情况下，机械设计要用到数学、材料科学和工程力学等学科的知识。
机械工程设计包括所有的机械设计，但它研究得更广，因为它也包括所有机械工程的分支科学，如热力学和流体力学除了所需的基本学科外，在机械工程设计中最初学习的还是机械设计。设计的各个阶段设计的整个过程从开始到结束，在这一过程中，设计是以认定一个需求并决定去为它做些什么而开始的。经过很多重复之后，最后提出满足这一要求的计划而结束这一设计过程。设计中考虑的因素。有时在某个系统中零件所需的强度是决定这零件的几何形状和尺寸大小的重要因素在这种情况下，我们说强度就是设计中要考虑的重要因素。当我们使用设计考虑因素这一表达方式时，我们是指影响零件设计或许整个系统设计的一些性能。在指定的设计情况下，通常必须对一系列这样的性能加以考虑。然而，为正确起见，我们应看到，在很多设计情况中，重要的设计考虑因素是不需进行计算或试验就能确定此零件或系统。特别是学生们，当处于需要做出重要的设计决定而实际上又无法进行任一运算的情形时，他们常常感到困惑。这些并不是特别的情况，他们每天都发生、设想一下，比如在一个医疗实验室机械的设计中，从销售的角度看，人们期望产生具有很高的强度和实用性的印象。厚重的零件安装在一起：能产生机器很坚固的印象。而有时机器和
零件的设计完全是从风格的角度而并非其他角度考虑的。我们陈述这些的目的就是为了你不被误导去相信每个设计决定都需要合理的数学方法。
制造是指企业参与把原材料变成成品。制造有3个明确的阶段。他们是：输入、加工输出。第一个阶段包括所有生产符合市场需要产品的必要因素。首先要有对该产品的需求，有必要的材料，同时还需要诸如能源、时间、人类的知识和技术等资源。最后，需要资金来获取所有其他的资源。输入阶段的资源经过第二个阶段的各个过程加以分配。这些过程吧原有材料加工成成品。先完成设计，基于这个设计，再形成各种计划。计划通过各种生产工艺得以实施。对各种资源和工艺进行管理以保证效率和生产率。例如必须要仔细管理资源以确保使用得当。最后，所谈论的产品被投入市场。最后阶段是输出阶段或成品阶段。一旦成品为人所购买，就必须把它运送到用户手中。根据产品的性能，可能要进行安装和进一步调试，此外有些产品尤其是那些非常复杂的产品对用户进行培训很重要。
6.制造中的材料和工艺
这里所说的工程材料分成两大类：金属和非金属材料。金属材料又进一步分为黑色金属和有色金属、高性能合金和粉末金属。非金属进一步分为塑料、合成橡胶、复合材料和陶瓷。这里所说的生产过程分成几个打的过程，其中包括成型、锻造、铸造／翻砂、热处理、固定／连接，计量／质量控制以及材料的切削。其中的每一个工艺又可进一步分成其他的工艺。制造业发展的各个阶段这些年来，制造过程走过了四个截然不同的发展阶段，尽管相互重叠。这些阶段是：第一阶段手工阶段，第二阶段机械化，第三阶段自动化，第四阶段集成化。
当人类最初将原材料加工成成品时，他们使用手工工艺。每件东西都是用手和手工操作的工具制成的。这是完全集成化生产的雏形。一个人确定需求、收集材料、设计一个产品来满足这种需求，生产这种产品并使用它。从开始到结束，一切都集中于做这个工作的人的头脑中。后来在工业革命时期引入了机械化的生产过程，人们开始使用机器来完成先前手工完成的工作。这导致了工作的专门化。专门化反过来也减少了制造中集成化的因素。在这一发展阶段，制造工人仅能看到他们生产的具体的工件所代表的整个生产过程的那一部分。人们无法说明白他们的工作是如何配合整个生产过程的，或者他们生产的零件时如何
装进一个成品的。制造工艺发展下的一个阶段是选定的工艺的自动化。这就是用计算机控制机器和工艺。在这一阶段，自动化孤岛开始出现在车间里。每个岛代表了产品生产的一个明确的工艺或一组工艺。尽管这些自动化孤岛的确提高了岛内部的单个工艺的生产率，但是整体的生产率往往没有变化。这是因为这些岛是夹在其他没有自动化的生产过程的中间，而且不与他们同步。最终的结果是，工件高校快速的通过自动化的工艺，可是却在人工部分停滞了下来，造成了瓶颈现象。为更好的理解这一问题，你可以设想一下在交通高峰期驾车从一个红灯处到下一个红灯处的情景。偶尔你会找到车少的地段，超过正在缓慢移动的车，可结果却发现在下一个红灯处被耽搁了。你在短时间的加速行驶的实质的效果被下一个红灯处的阻塞抵消了。如果你和其他司机能使你们的速度与红灯的变化同步。就会前进的更快。那么，所有的车都会始终如一地、平稳地运行，最后每个人都前进较快。在车间里对稳定同步的流水作业的需求，促使了集成化制造的发展。这是一个仍在形成中的工艺。在完全集成化情况下，机器和加工都是计算机控制的，集成化也是通过计算机完成的。比如在上一段的模拟问题中，计算机将使所有车的行进与红灯的变化相配合。以使每个人都能稳定地行驶。
科学地分析运动、时间和各种力的学科叫力学，它由两部分组成：静力学和动力学。静力学研究分析静止不动的系统，也就是说在这些系统中，时间不是考虑的因素，而动力学研究分析随时间变化而变化的系统。
动力学也由两部分构成。Euler在1775年首次将它们看作两个不同的分支：刚体运动的研究可以方便地分成两部分：一是几何，另一个是力学。第一部分是在不考虑运动原因的情况下来研究刚体从一个指定位置到另外任一点的移动，而且必须用解析公式来体现，公式将确定刚体没一点的位置。因此，这一研究仅仅是关于几何学的，更确切地说是关于实体物切割术的。很明显，把一部分和本来属于机械学的那一部分分开，从动力学原理来研究运动，这比把两部分合起来考虑容易很多。属于动力学的这两部分后来被分成两个不同的学科，运动学和动力学，分别研究运动和产生运动的力。因此，设计机械系统的首要问题是理解它的运动学。运动学研究运动，而不是研究产生它的力。更确切的运动学是研究位移、位置、旋转、速度、速率和加速度的学科，比如说，研究行星或轨道的运动也是一个运动学问题。
在上述引用的内容中应注意的是Euler把动力学分成运动学和动力学是基
于它们是研究刚体的假设基础之上的。在这个非常重要的前提基础上才允许分别对待这两门学科。对于柔体、柔体本身的形状乃至于柔性物体的运动取决于作用于它们身上的力。在这种情况下，须同时研究力和运动，因此很大程度上增加了分析的复杂性。幸运的是，尽管真正的机器零件或多或少都是可弯曲的，设计机器时通常是设计用刚性材料，使零件挠曲降到最低。因此，当分析机器的运动学的性能时，人们常常假设挠曲是可忽略的，零件是刚性的，而且当载荷以知时，在运动分析结束后，再设计零件以便证实这个假设。
外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
前言 在目前激烈的市场竞争中，产品投入市场的迟早往往是成败的关键。模具是高质量、高效率的产品生产工具，模具开发周期占整个产品开发周期的主要部分。因此客户对模具开发周期要求越来越短，不少客户把模具的交货期放在第一位置，然后才是质量和价格。因此，如何在保证质量、控制成本的前提下加工模具是值得认真考虑的问题。模具加工工艺是一项先进的制造工艺，已成为重要发展方向，在航空航天、汽车、机械等各行业得到越来越广泛的应用。模具加工技术，可以提高制造业的综合效益和竞争力。研究和建立模具工艺数据库，为生产企业提供迫切需要的高速切削加工数据，对推广高速切削加工技术具有非常重要的意义。本文的主要目标就是构建一个冲压模具工艺过程，将模具制造企业在实际生产中结合刀具、工件、机床与企业自身的实际情况积累得高速切削加工实例、工艺参数和经验等数据有选择地存储到高速切削数据库中，不但可以节省大量的人力、物力、财力，而且可以指导高速加工生产实践，达到提高加工效率，降低刀具费用，获得更高的经济效益。 1.冲压的概念、特点及应用 冲压是利用安装在冲压设备（主要是压力机）上的模具对材料施加压力，使其产生分离或塑性变形，从而获得所需零件（俗称冲压或冲压件）的一种压力加工方法。冲压通常是在常温下对材料进行冷变形加工，且主要采用板料来加工成所需零件，所以也叫冷冲压或板料冲压。冲压是材料压力加工或塑性加工的主要方法之一，隶属于材料成型工程术。 冲压所使用的模具称为冲压模具，简称冲模。冲模是将材料（金属或非金属）批量加工成所需冲件的专用工具。冲模在冲压中至关重要，没有符合要求的冲模，批量冲压生产就难以进行；没有先进的冲模，先进的冲压工艺就无法实现。冲压工艺与模具、冲压设备和冲压材料构成冲压加工的三要素，只有它们相互结合才能得出冲压件。 与机械加工及塑性加工的其它方法相比，冲压加工无论在技术方面还是经济方面都具有许多独特的优点，主要表现如下； (1) 冲压加工的生产效率高，且操作方便，易于实现机械化与自动化。这是
附录一英文科技文献翻译 英文原文： Experimental investigation of laser surface textured parallel thrust bearings Performance enhancements by laser surface texturing (LST) of parallel-thrust bearings is experimentally investigated. Test results are compared with a theoretical model and good correlation is found over the relevant operating conditions. A compari- son of the performance of unidirectional and bi-directional partial-LST bearings with that of a baseline, untextured bearing is presented showing the bene?ts of LST in terms of increased clearance and reduced friction. KEY WORDS: ?uid ?lm bearings, slider bearings, surface texturing 1. Introduction The classical theory of hydrodynamic lubrication yields linear (Couette) velocity distribution with zero pressure gradients between smooth parallel surfaces under steady-state sliding. This results in an unstable hydrodynamic ?lm that would collapse under any external force acting normal to the surfaces. However, experience shows that stable lubricating ?lms can develop between parallel sliding surfaces, generally because of some mechanism that relaxes one or more of the assumptions of the classical theory. A stable ?uid ?lm with su?cient load-carrying capacity in parallel sliding surfaces can be obtained, for example, with macro or micro surface structure of di?erent types. These include waviness [1] and protruding microasperities [2–4]. A good literature review on the subject can be found in Ref. [5]. More recently, laser surface texturing (LST) [6–8], as well as inlet roughening by longitudinal or transverse grooves [9] were suggested to provide load capacity in parallel sliding. The inlet roughness concept of Tonder [9] is based on ??e?ective clearance‘‘ reduction in the sliding direction and in this respect it is identical to the par- tial-LST concept described in ref. [10] for generating hydrostatic e?ect in high-pressure mechanical seals. Very recently Wang et al. [11] demonstrated experimentally a doubling of the load-carrying capacity for the surface- texture design by reactive ion etching of SiC
附录1：外文资料翻译 A1.1外文资料题目 26.22 接地故障电路开关 我们目前为止报道的接地方法通常是充分的, 但更加进一步的安全措施在某些情况下是必要的。假设例如, 有人将他的手指伸进灯口（如Fig.26.45示）。虽然金属封入物安全地接地, 但那人仍将受到痛苦的震动。或假设1个120V 的电炉掉入游泳池。发热设备和联络装置将导致电流流入在水池中的危害，即使电路的外壳被安全地接地，现在已经发展为当这样的事件发生时，设备的电源将被切断。如果接地电流超过5mA ，接地开关将在5 ms 内跳掉，这些装置怎么运行的？ 如Fig.26.46所示，一台小变流器缠绕上导线 ，第二步是要连接到可能触发开合120 V 线的一台敏感电子探测器。 在正常情况下流过导体的电流W I 与中性点上的电流N I 准切的相等，因此流经核心的净潮流(N W I I -)是零。 结果，在核心没有产生电流，导致的电压F E 为零，并且开关CB 没有动作。 假设如果某人接触了一个终端(图Fig.26.45示)，故障电流F I 将直接地从载电线漏到地面，这是可能发生的。如果绝缘材料在马达和它的地面封入物之间断开，故障电流也会被产生。在以下任何情况下，流经CT 的孔的净潮流等于F I 或L I ，不再是零。电流被产生，并且产生了可以控制CB 开关的电压F E 。 由于5 mA 不平衡状态只必须被检测出，变压器的核心一定是非常有渗透性的在低通量密度。 Supermalloy 是最为常用的，因为它有相对渗透性典型地70000在通量密度仅4mT 。 26.23 t I 2是导体迅速发热的因素 它有时发生于导体短期内电流远大于正常值的情况下，R I 2损失非常大并且导体的温度可以在数秒内上升几百度。例如，当发生严重短路时，在保险丝或开关作用之前，会有很大的电流流过导体和电缆。 此外，热量没有时间被消散到周围，因此导体的温度非常迅速地增加。 在这些情况下什么是温度上升？ 假设导体有大量m ，电阻R 和热量热容量c 。 而且，假设电流是I ，并且那它流动在t 少于15秒期间。 在导体上引起的热 Rt I Q 2= 从Eq.3.17，在功率一定的情况下我们可以计算导体上升的温度差：
毕业设计（论文）外文文献翻译 文献、资料中文题目：软件开发概念和设计方法文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院（部）： 专业： 班级： 姓名： 学号： 指导教师： 翻译日期： 2017.02.14
外文资料原文 Software Development Concepts and Design Methodologies During the 1960s, ma inframes and higher level programming languages were applied to man y problems including human resource s yste ms,reservation s yste ms, and manufacturing s yste ms. Computers and software were seen as the cure all for man y bu siness issues were some times applied blindly. S yste ms sometimes failed to solve the problem for which the y were designed for man y reasons including: ?Inability to sufficiently understand complex problems ?Not sufficiently taking into account end-u ser needs, the organizational environ ment, and performance tradeoffs ?Inability to accurately estimate development time and operational costs ?Lack of framework for consistent and regular customer communications At this time, the concept of structured programming, top-down design, stepwise refinement，and modularity e merged. Structured programming is still the most dominant approach to software engineering and is still evo lving. These failures led to the concept of "software engineering" based upon the idea that an engineering-like discipl ine could be applied to software design and develop ment. Software design is a process where the software designer applies techniques and principles to produce a conceptual model that de scribes and defines a solution to a problem. In the beginning, this des ign process has not been well structured and the model does not alwa ys accurately represent the problem of software development. However,design methodologies have been evolving to accommo date changes in technolog y coupled with our increased understanding of development processes. Whereas early desig n methods addressed specific aspects of the
机械设计理论 机械设计是一门通过设计新产品或者改进老产品来满足人类需求的应用技术科学。它涉及工程技术的各个领域，主要研究产品的尺寸、形状和详细结构的基本构思，还要研究产品在制造、销售和使用等方面的问题。 进行各种机械设计工作的人员通常被称为设计人员或者机械设计工程师。机械设计是一项创造性的工作。设计工程师不仅在工作上要有创造性，还必须在机械制图、运动学、工程材料、材料力学和机械制造工艺学等方面具有深厚的基础知识。如前所诉，机械设计的目的是生产能够满足人类需求的产品。发明、发现和科技知识本身并不一定能给人类带来好处，只有当它们被应用在产品上才能产生效益。因而，应该认识到在一个特定的产品进行设计之前，必须先确定人们是否需要这种产品。 应当把机械设计看成是机械设计人员运用创造性的才能进行产品设计、系统分析和制定产品的制造工艺学的一个良机。掌握工程基础知识要比熟记一些数据和公式更为重要。仅仅使用数据和公式是不足以在一个好的设计中做出所需的全部决定的。另一方面，应该认真精确的进行所有运算。例如，即使将一个小数点的位置放错，也会使正确的设计变成错误的。 一个好的设计人员应该勇于提出新的想法，而且愿意承担一定的风险，当新的方法不适用时，就使用原来的方法。因此，设计人员必须要有耐心，因为所花费的时间和努力并不能保证带来成功。一个全新的设计，要求屏弃许多陈旧的，为人们所熟知的方法。由于许多人墨守成规，这样做并不是一件容易的事。一位机械设计师应该不断地探索改进现有的产品的方法，在此过程中应该认真选择原有的、经过验证的设计原理，将其与未经过验证的新观念结合起来。 新设计本身会有许多缺陷和未能预料的问题发生，只有当这些缺陷和问题被解决之后，才能体现出新产品的优越性。因此，一个性能优越的产品诞生的同时，也伴随着较高的风险。应该强调的是，如果设计本身不要求采用全新的方法，就没有必要仅仅为了变革的目的而采用新方法。 在设计的初始阶段，应该允许设计人员充分发挥创造性，不受各种约束。即使产生了许多不切实际的想法，也会在设计的早期，即绘制图纸之前被改正掉。只有这样，才不致于堵塞创新的思路。通常，要提出几套设计方案，然后加以比较。很有可能在最后选定的方案中，采用了某些未被接受的方案中的一些想法。
本科毕业论文(设计) 外文翻译 学院：机电工程学院 专业：机械工程及自动化 姓名：高峰 指导教师：李延胜 2011年05 月10日 教育部办公厅 Failure Analysis，Dimensional Determination And
Analysis，Applications Of Cams INTRODUCTION It is absolutely essential that a design engineer know how and why parts fail so that reliable machines that require minimum maintenance can be designed．Sometimes a failure can be serious，such as when a tire blows out on an automobile traveling at high speed．On the other hand，a failure may be no more than a nuisance．An example is the loosening of the radiator hose in an automobile cooling system．The consequence of this latter failure is usually the loss of some radiator coolant，a condition that is readily detected and corrected．The type of load a part absorbs is just as significant as the magnitude．Generally speaking，dynamic loads with direction reversals cause greater difficulty than static loads，and therefore，fatigue strength must be considered．Another concern is whether the material is ductile or brittle．For example，brittle materials are considered to be unacceptable where fatigue is involved． Many people mistakingly interpret the word failure to mean the actual breakage of a part．However，a design engineer must consider a broader understanding of what appreciable deformation occurs．A ductile material，however will deform a large amount prior to rupture．Excessive deformation，without fracture，may cause a machine to fail because the deformed part interferes with a moving second part．Therefore，a part fails(even if it has not physically broken)whenever it no longer fulfills its required function．Sometimes failure may be due to abnormal friction or vibration between two mating parts．Failure also may be due to a phenomenon called creep，which is the plastic flow of a material under load at elevated temperatures．In addition，the actual shape of a part may be responsible for failure．For example，stress concentrations due to sudden changes in contour must be taken into account．Evaluation of stress considerations is especially important when there are dynamic loads with direction reversals and the material is not very ductile． In general，the design engineer must consider all possible modes of failure，which include the following． ——Stress ——Deformation ——Wear ——Corrosion ——Vibration ——Environmental damage ——Loosening of fastening devices
外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华
外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文
应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。
中文翻译 STC89C52处理芯片 电气工程的研究和解决方案中心（ceers） 艾哈迈德为吉.波特 首要性能： 与MCS-51单片机产物兼容、8K字节在系统可编程视频存储器、1000次擦拭周期，全静态操作：0Hz~33Hz、三级加密程序存储器，32个可编程I/O接口线、三个16位定时器（计数器），八个中断源、低功能耗空闲和掉电模式、掉电后间断可唤醒，看门狗定时器、双数值指针，掉电标示符。 关键词：单片机，UART串行通道，掉电标示符等 前言 可以说，二十世纪跨越了三个“点”的时代，即电气时代，电子时代和现已进入的电脑时代。不过，这种电脑，通常指的是个人计算机，简称PC机。还有就是把智能赋予各种机械的单片机（亦称微控制器）。顾名思义，这种计算机的最小系统只用了一片集成电路，即可进行简单的运算可控制。因为它体积小，通常都是藏在被控机械的内部里面。它在整个装置中，起着有如人类头脑的作用，他出了毛病，整个装置就会瘫痪。现在，单片机的种类和适用领域已经十分广泛，如智能仪表、实施工控、通讯设备、导航系统、家用电器等。各种产品一旦用上了单片机，就你能起到产品升级换代的功效，常在产品名称前冠以形容词——“智能型”，如智能洗衣机等。接下来就是关于国产STC89C52单片机的一些基本参数。 功能特性描述: STC89C52单片机是一种低功耗、高性能CMOS8位微控制器，具有8K在系统可编程视频播放存贮器使用高密度非易失性存储器技术制造，与工业80C51 产物指令和引脚完全兼容。片上反射速度允许程序存储器在系统可编程，也适用于常规的程序编写器。在其单芯片上，拥有灵敏小巧的八位中央处理器和在线系统可编程反射，这些使用上STC89C52微控制器为众多嵌入式的控制应用系统提供高度矫捷的、更加有用的解决方案。STC89C52微控制器具有以下的标准功效：8K字节的反射速度，256字节的随机存取储存器，32位I/O串口线，看门狗定时器，2个数值指针，三个16 为定时器、计数器，一个6向量2级间断结构，片内晶振及钟表电路。另外，STC89C52可降至0HZ静态逻辑操作，支持两种软件可选择节电模式、间断继续工作。空闲模式下，CPU停止工作，允许RAM、定时器/计数器、串口、间断继续工作。掉电保护体式格局下，RAM内容被生成，振动器被冻结，单片机一切的工作停止，直到下一个间断或者硬件复位为止。8位微型控制器8K字节在系统中可编程FlashSTC89C52.。
I / 11 本科毕业设计外文翻译 <2018届） 论文题目基于WEB 的J2EE 的信息系统的方法研究 作者姓名[单击此处输入姓名] 指导教师[单击此处输入姓名] 学科(专业 > 所在学院计算机科学与技术学院 提交日期[时间 ]
基于WEB的J2EE的信息系统的方法研究 摘要：本文介绍基于工程的Java开发框架背后的概念，并介绍它如何用于IT 工程开发。因为有许多相同设计和开发工作在不同的方式下重复，而且并不总是符合最佳实践，所以许多开发框架建立了。我们已经定义了共同关注的问题和应用模式，代表有效解决办法的工具。开发框架提供：<1）从用户界面到数据集成的应用程序开发堆栈；<2）一个架构，基本环境及他们的相关技术，这些技术用来使用其他一些框架。架构定义了一个开发方法，其目的是协助客户开发工程。 关键词：J2EE 框架WEB开发 一、引言 软件工具包用来进行复杂的空间动态系统的非线性分析越来越多地使用基于Web的网络平台，以实现他们的用户界面，科学分析，分布仿真结果和科学家之间的信息交流。对于许多应用系统基于Web访问的非线性分析模拟软件成为一个重要组成部分。网络硬件和软件方面的密集技术变革[1]提供了比过去更多的自由选择机会[2]。因此，WEB平台的合理选择和发展对整个地区的非线性分析及其众多的应用程序具有越来越重要的意义。现阶段的WEB发展的特点是出现了大量的开源框架。框架将Web开发提到一个更高的水平，使基本功能的重复使用成为可能和从而提高了开发的生产力。 在某些情况下，开源框架没有提供常见问题的一个解决方案。出于这个原因，开发在开源框架的基础上建立自己的工程发展框架。本文旨在描述是一个基于Java的框架，该框架利用了开源框架并有助于开发基于Web的应用。通过分析现有的开源框架，本文提出了新的架构，基本环境及他们用来提高和利用其他一些框架的相关技术。架构定义了自己开发方法，其目的是协助客户开发和事例工程。 应用程序设计应该关注在工程中的重复利用。即使有独特的功能要求，也
机械类外文翻译 塑料注塑模具浇口优化 摘要:用单注塑模具浇口位置的优化方法，本文论述。该闸门优化设计的目的是最大限度地减少注塑件翘曲变形，翘曲，是因为对大多数注塑成型质量问题的关键，而这是受了很大的部分浇口位置。特征翘曲定义为最大位移的功能表面到表面的特征描述零件翘曲预测长度比。结合的优化与数值模拟技术，以找出最佳浇口位置，其中模拟armealing算法用于搜索最优。最后，通过实例讨论的文件，它可以得出结论，该方法是有效的。 注塑模具、浇口位臵、优化、特征翘曲变形关键词: 简介 塑料注射成型是一种广泛使用的，但非常复杂的生产的塑料产品，尤其是具有高生产的要求，严密性，以及大量的各种复杂形状的有效方法。质量ofinjection 成型零件是塑料材料，零件几何形状，模具结构和工艺条件的函数。注塑模具的一个最重要的部分主要是以下三个组件集:蛀牙，盖茨和亚军，和冷却系统。拉米夫定、Seow(2000)、金和拉米夫定(2002) 通过改变部分的尼斯达到平衡的腔壁厚度。在平衡型腔充填过程提供了一种均匀分布压力和透射电镜,可以极大地减少高温的翘曲变形的部分～但仅仅是腔平衡的一个重要影响因素的一部分。cially Espe,部分有其功能上的要求,其厚度通常不应该变化。 pointview注塑模具设计的重点是一门的大小和位臵,以及流道系统的大小和布局。大门的大小和转轮布局通常被认定为常量。相对而言,浇口位臵与水口大小布局也更加灵活,可以根据不同的零件的质量。 李和吉姆(姚开屏,1996a)称利用优化流道和尺寸来平衡多流道系统为multiple 注射系统。转轮平衡被形容为入口压力的差异为一多型腔模具用相同的蛀牙,也存
沈阳工业大学工程学院 毕业设计（论文）外文翻译 毕业设计（论文）题目：工具盒盖注塑模具设计 外文题目：Friction , Lubrication of Bearing 译文题目：轴承的摩擦与润滑 系（部）：机械系 专业班级：机械设计制造及其自动化0801 学生姓名：王宝帅 指导教师：魏晓波 2010年10 月15 日
外文文献原文： Friction , Lubrication of Bearing In many of the problem thus far , the student has been asked to disregard or neglect friction . Actually , friction is present to some degree whenever two parts are in contact and move on each other. The term friction refers to the resistance of two or more parts to movement. Friction is harmful or valuable depending upon where it occurs. friction is necessary for fastening devices such as screws and rivets which depend upon friction to hold the fastener and the parts together. Belt drivers, brakes, and tires are additional applications where friction is necessary. The friction of moving parts in a machine is harmful because it reduces the mechanical advantage of the device. The heat produced by friction is lost energy because no work takes place. Also , greater power is required to overcome the increased friction. Heat is destructive in that it causes expansion. Expansion may cause a bearing or sliding surface to fit tighter. If a great enough pressure builds up because made from low temperature materials may melt. There are three types of friction which must be overcome in moving parts: (1)starting, (2)sliding, and(3)rolling. Starting friction is the friction between two solids that tend to resist movement. When two parts are at a state of rest, the surface irregularities of both parts tend to interlock and form a wedging action. To produce motion in these parts, the wedge-shaped peaks and valleys of the stationary surfaces must be made to slide out and over each other. The rougher the two surfaces, the greater is starting friction resulting from their movement . Since there is usually no fixed pattern between the peaks and valleys of two mating parts, the irregularities do not interlock once the parts are in motion but slide over each other. The friction of the two surfaces is known as sliding friction. As shown in figure ,starting friction is always greater than sliding friction . Rolling friction occurs when roller devces are subjected to tremendous stress which cause the parts to change shape or deform. Under these conditions, the material in front of a roller tends to pile up and forces the object to roll slightly uphill. This changing of shape , known as deformation, causes a movement of molecules. As a result ,heat is produced from the added energy required to keep the parts turning and overcome friction. The friction caused by the wedging action of surface irregularities can be overcome
毕业设计（论文） 外文翻译 题目西安市水源工程中的 水电站设计 专业水利水电工程 班级 学生 指导教师 2016年
研究钢弧形闸门的动态稳定性 牛志国 河海大学水利水电工程学院，中国南京，邮编210098 nzg_197901@https://www.doczj.com/doc/948567276.html,，niuzhiguo@https://www.doczj.com/doc/948567276.html, 李同春 河海大学水利水电工程学院，中国南京，邮编210098 ltchhu@https://www.doczj.com/doc/948567276.html, 摘要 由于钢弧形闸门的结构特征和弹力，调查对参数共振的弧形闸门的臂一直是研究领域的热点话题弧形弧形闸门的动力稳定性。在这个论文中，简化空间框架作为分析模型，根据弹性体薄壁结构的扰动方程和梁单元模型和薄壁结构的梁单元模型，动态不稳定区域的弧形闸门可以通过有限元的方法，应用有限元的方法计算动态不稳定性的主要区域的弧形弧形闸门工作。此外，结合物理和数值模型，对识别新方法的参数共振钢弧形闸门提出了调查，本文不仅是重要的改进弧形闸门的参数振动的计算方法，但也为进一步研究弧形弧形闸门结构的动态稳定性打下了坚实的基础。 简介 低举升力，没有门槽，好流型，和操作方便等优点，使钢弧形闸门已经广泛应用于水工建筑物。弧形闸门的结构特点是液压完全作用于弧形闸门，通过门叶和主大梁，所以弧形闸门臂是主要的组件确保弧形闸门安全操作。如果周期性轴向载荷作用于手臂，手臂的不稳定是在一定条件下可能发生。调查指出:在弧形闸门的20次事故中，除了极特殊的破坏情况下，弧形闸门的破坏的原因是弧形闸门臂的不稳定;此外，明显的动态作用下发生破坏。例如:张山闸，位于中国的江苏省，包括36个弧形闸门。当一个弧形闸门打开放水时，门被破坏了，而其他弧形闸门则关闭，受到静态静水压力仍然是一样的，很明显，一个动态的加载是造成的弧形闸门破坏一个主要因素。因此弧形闸门臂的动态不稳定是造成弧形闸门(特别是低水头的弧形闸门)破坏的主要原是毫无疑问。
外文文献： The Intelligent Building One of the benefits of the rapid evolution of information technology has been the development of systems that can measure, evaluate, and respond to change。An enhanced ability to control change has sparked developments in the way we design our physical environment, in particular, the buildings in which we work。As a result, we are witnessing significant growth in the area of "Intelligent Buildings"--buildings that incorporate information technology and communication systems, making them more comfortable, secure, productive, and cost-effective What is an Intelligent Building? An Intelligent Building is one equipped with the telecommunications infrastructure that enables it to continuously respond and adapt to changing conditions, allowing for a more efficient use of resources and increasing the comfort and security of its occupants。An Intelligent Building provides these benefits through automated control systems such as: heating, ventilation, and air-conditioning (HVAC)；fire safety；security；and energy/lighting management。For example, in the case of a fire, the fire alarm communicates with the security system to unlock the doors。The security system communicates with the HVAC system to regulate the flow of air to prevent the fire from spreading。 What benefits do Intelligent Buildings offer their owners and occupants? The introduction in the workplace of computers printers photocopiers, and fax machines has increased indoor pollution。Electrical and telecommunications facilities in office buildings are under pressure to satisfy the demands created by the rapid growth of computer and networking technologies。These factors have a definite impact on productivity. New technology can be used to create Intelligent Buildings that address these problems by providing a healthier, more productive, and less energy-intensive work environment。As these are critical factors for business