Finite Elements in Analysis and Design 38(2002)765–782
https://www.doczj.com/doc/895933886.html,/locate/?nel
Finite-and boundary-element linear and nonlinear analyses of shells and shell-like structures A bibliography (1999–2001)
Jaroslav Mackerle ?
Link o ping Institute o Technology,Department o Mechanical Engineering,S-58183Link o ping,Sweden Abstract
This bibliography contains references to papers,conference proceedings and theses =dissertations dealing with the linear and nonlinear ?nite element and boundary element analyses of shells that were published in 1999–2001.?2002Elsevier Science B.V.All rights reserved.
1.Introduction
This bibliography provides a list of references on the linear and nonlinear ?nite element and boundary element analyses of shells.General solution techniques as well as problem-speci?c applications are included.The entries have been retrieved from the author’s database,MAKE-BASE.They are grouped into two main sections:
?Finite elements ?Boundary elements
The references have been published in scienti?c journals,conference proceedings,and theses =dissertations between 1999and 2001(the ?rst ?ve months of 2001)[1–310,382–394].Some previously published papers,reviews and theses on the analysis of shells by means of ?nite element and boundary element methods,in general,can be found in entries [311–381]of the Finite element methods section and in [395–398]of the Boundary element methods section of this bibliography,respectively.The references are sorted in each category alphabetically according to the ?rst author’s name.
?
Tel.:+46-13-28-1111;fax:+46-13-28-2717.E-mail address:jarma@ikp.liu.se (J.Mackerle).
0168-874X/02/$-see front matter ?2002Elsevier Science B.V.All rights reserved.PII:S 0168-874X(01)00103-2
766J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
The main topics include:2D and3D,linear and nonlinear,static and dynamic analyses of shells;material and geometrical nonlinear analyses;symmetric and asymmetric vibrations; transient dynamic analyses;seismic analyses;impact problems;thermal and thermomechanical analyses;static and dynamic stability problems;buckling and post-buckling;collapse;fracture mechanics problems;crack analyses;delamination problems;creep-damage;damage;ultimate strength analyses;contact problems;contact with friction;shells on elastic foundations;consti-tutive modelling;material processing;metal forming;adaptive modelling;stochastic problems; integration schemes;stress recovery and error estimation.
Element library:triangular,rectangular and quadrilateral shells;low-order and high-order shell elements;shallow and deep shells; at and curved shell elements;thick and thin elements; degenerated elements;conforming and non-conforming elements;laminated elements;layered elements;axisymmetric shells;sandwich shells;shells with cutouts;isoparametric shell elements; locking-free elements;element tests.Element formulations:displacement,mixed and hybrid methods;hybrid-mixed methods;hybrid and enhanced elements;assumed strain elements. Geometry:elliptic,parabolic and hyperbolic shells;circular cylindrical shells;conical shells; spherical shells;toroidal shells;grid shells;general shells;applied shell-like structures-silos, pressure vessels and piping;imperfect shell structures.
Material=material properties:metals;polymers;composites;concrete;isotropic,orthotropic and anisotropic;linear elastic;hyperelastic;rigid-plastic;elasto-plastic;viscoelastic;viscoplastic; elastoviscoplastic;thermoviscoelastic;incompressible.
Not included in this bibliography:shell?eld problems; uid-structure interaction;optimisation problems;smart shells;shell mesh generation.
References
Finite element methods:papers in journals=conference proceedings and theses
[1]R.L.Actis,et al.,Hierarchic models for laminated plates and shells,Comput.Methods Appl.Mech.Eng.
172(1=4)(1999)79–107.
[2]Y.Akoz,A.Ozutok,A functional for shells of arbitrary geometry and a mixed?nite element method for
parabolic and circular cylindrical shells,Int.J.Numer.Meth.Eng.47(12)(2000)1933–1981.
[3]U.Akyuz, A.Ertepinar,Stability and asymmetric vibrations of pressurized compressible hyperelastic
cylindrical shells,Int.J.Non-Linear Mech.34(3)(1999)391–404.
[4]H.Al-Khaiat,et al.,Impact of shelling on RC frames with and without in?ll walls,J.Perf.Constr.Facil.
13(1)(1999)22–28.
[5]H.Altenbach,et al.,On the use of solid-and shell-type?nite elements in creep-damage predictions of
thinwalled structures,Arch.Appl.Mech.71(2=3)(2001)164–181.
[6]J.Argyris,et al.,A stochastic sti ness matrix for the triangular shell element TRIC,Proceedings of the Fifth
US National Congress of Computational Mechanics,Boulder,CO,1999,p.241.
[7]J.H.Argyris,et al.,The TRIC shell element:theoretical and numerical investigation,Comput.Methods Appl.
Mech.Eng.182(1=2)(2000)217–245.
[8]A.E.Assan,Nonlinear analysis of reinforced concrete cylindrical shells,Proceedings of the Fifth International
Conference on Computational Structures Technology,Civil-Comp Publ.,Edinburgh,2000,pp.37–43. [9]O.Attia,A.El-Zafrany,A high-order shear element for nonlinear vibration analysis of composite layered
plates and shells,Int.J.Mech.Sci.41(4=5)(1999)461–486.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782767 [10]F.Auslender,https://www.doczj.com/doc/895933886.html,bescure,Spherical elastic-plastic structures under internal explosion—approximate
analytical solutions and applications,Eng.Struct.22(8)(2000)984–992.
[11]H.Baaser,D.Gross,Crack analysis in ductile cylindrical shells using Gurson’s model,Int.J.Solids Struct.
37(46=7)(2000)7093–7104.
[12]M.Balah,H.N.Al-Ghamedy,A higher order four node laminated shell element,Proceedings of the Fifth
US National Congress Computational Mechanics,Boulder,CO,1999,pp.161–162.
[13]E.Barkanov,et al.,Transient response of sandwich viscoelastic beams,plates and shells under impulse
loading,https://www.doczj.com/doc/895933886.html,pos.Mater.36(3)(2000)215–222.
[14]A.Barut,et al.,A new sti ened shell element for geometrically nonlinear analysis of composite laminates,
Comput.&Struct.77(1)(2000)11–40.
[15]Y.Basar,A.Eckstein,Large inelastic strain analysis by multilayer shell elements,Acta Mech.141(3=4)
(2000)225–252.
[16]Y.Basar,M.Itskov,Constitutive model and?nite element formulation for large strain elasto-plastic analysis
of shells,Comput.Mech.23(5=6)(1999)466–481.
[17]Y.Basar,M.H.Omurtag,Free-vibration analysis of thin=thick laminated structures by layer-wise shell models,
Comput.&Struct.74(4)(2000)409–427.
[18]Y.Basar,et al.,Composite laminates:nonlinear interlaminar stress analysis by multi-layer shell elements,
Comput.Methods Appl.Mech.Eng.185(2=4)(2000)367–397.
[19]K.Bassayya,U.Shrinivasa,A14-node brick element,PN5X1,for plates and shells,Comput.&Struct.74
(2)(2000)167–178.
[20]K.J.Bathe,The inf-sup condition and its evaluation for mixed?nite element methods,Comput.&Struct.79
(2)(2001)243–252.
[21]K.J.Bathe,et al.,An evaluation of the MITC shell elements,Comput.&Struct.75(1)(2000)1–30.
[22]K.J.Bathe,et al.,An inf-sup test for shell?nite elements,Comput.&Struct.75(5)(2000)439–456.
[23]J.L.Batoz,et al.,On the linear analysis of plates and shells using a new-16degrees of freedom at shell
element,Comput.&Struct.78(1=3)(2000)11–20.
[24]W.M.Beltman,et al.,The structural response of cylindrical shells to internal shock loading,J.Press.Vess.
Technol.,ASME121(3)(1999)315–322.
[25]A.Benjeddou,Vibrations of complex shells of revolution using B-spline?nite elements,Comput.&Struct.
74(4)(2000)429–440.
[26]M.Bernadou,Some approximation methods for linear thin shell problems,in:Plates Shells,CRM Proceedings
Lecture Notes,Vol.21,AMS,Providence,RI,1999,pp.37–54.
[27]P.A.Berry,et al.,Compression tests on cylinders with circumferential weld depressions,J.Eng.Mech.,
ASCE126(4)(2000)405–413.
[28]T.Berstad,et al.,Computational model of ductile damage and fracture in shell analysis,Proceedings of the
Second European LS-DYNA Conference,Gothenburg,Sweden,1999,pp.A37–44.
[29]P.Betsch,E.Stein,Numerical implementation of multiplicative elasto-plasticity into assumed strain elements
with application to shells at large strains,Comput.Methods Appl.Mech.Eng.179(3=4)(1999)215–245.
[30]R.S.Bhatia,G.S.Sekhon,Generation of exact sti ness matrix for a conical shell element,Comput.&Struct.
70(4)(1999)425–435.
[31]C.Bisagni,Numerical analysis and experimental correlation of composite shell buckling and post-buckling,
Composites,Part B31(8)(2000)655–667.
[32]M.Bischo ,E.Ramm,Theory and numerics of a three-dimensional shell model,Proceedings of the Fifth
US National Congress of Computational Mechanics,Boulder,CO,1999,pp.163–164.
[33]M.Bischo ,E.Ramm,On the physical signi?cance of higher order kinematic and static variables in a
three-dimensional shell formulation,Int.J.Solids Struct.37(46=47)(2000)6933–6960.
[34]J.Blachut,O.R.Jaiswal,On the choice of initial geometric imperfections in externally pressurized shells,J.
Press.Vess.Technol.,ASME121(1)(1999)71–76.
[35]J.Blachut,O.R.Jaiswal,On buckling of toroidal shells under external pressure,Comput.&Struct.77(3)
(2000)233–251.
768J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[36]K.U.Bletzinger,The generation of shear locking free beam,plate and shell elements by the discrete shear
gap method,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO, 1999,pp.157–158.
[37]K.U.Bletzinger,et al.,A uni?ed approach for shear-locking-free triangular and rectangular shell?nite
elements,Comput.&Struct.75(3)(2000)321–334.
[38]S.Botello,et al.,A layer-wise triangle for analysis of laminated composite plates and shells,Comput.&
Struct.70(6)(1999)635–646.
[39]B.Brank,E.Carrera,A family of shear-deformable shell?nite elements for composite structures,Comput.
&Struct.76(1=3)(2000)287–297.
[40]B.Brank,E.Carrera,Multilayered shell?nite element with interlaminar continuous shear stresses:a
re?nement of the Reissner-Mindlin formulation,Int.J.Numer.Methods Eng.48(6)(2000)843–874. [41]D.Briassoulis,Finite element analysis of a cylindrical silo shell under unsymmetrical pressure distributions,
Comput.&Struct.78(1=3)(2000)271–281.
[42]D.Briassoulis,Critical issues in testing the asymptotic behaviour of shell elements,in:B.H.V.Topping(Ed.),
Finite Elements:Techniques and Developments,Civil-Comp Publ.,Edinburgh,2000,pp.173–182. [43]R.Brighenti,Surface cracks in shells under di erent hoop stress distributions,Int.J.Press.Vess.Piping77
(9)(2000)503–509.
[44]L.Bruschelli,https://www.doczj.com/doc/895933886.html,torrata,The in uence of shell behavior on load distribution for thin-walled conical joints,
J.Appl.Mech.,ASME67(2)(2000)298–306.
[45]M.L.Bucalem,S.H.S.Da Nobrega,A mixed formulation for general triangular isoparametric shell elements
based on the degenerated solid approach,Comput.&Struct.78(1=3)(2000)35–44.
[46]T.Bulenda,J.Knippers,Stability of grid shells,Comput.&Struct.79(12)(2001)1161–1174.
[47]A.Carpinteri,et al.,External surface cracks in shells under cyclic internal pressure,Fatigue Fract.Eng.
Mater.Struct.23(6)(2000)467–476.
[48]V.Carvelli,et al.,Buckling strength of GFRP under-water vehicles,Composites Part B32(2)(2001)89–101.
[49]J.J.L.Cela,et al.,Numerical analysis of axisymmetric shells by one-dimensional continuum elements suitable
for high frequency excitations,Comput.&Struct.78(5)(2000)711–724.
[50]C.C.Chamis,L.Minnetyan,Defect=damage tolerance of pressurized?ber composite shells,Compos.Struct.
51(2)(2001)159–168.
[51]D.Chapelle,K.J.Bathe,The mathematical shell model underlying general shell elements,Int.J.Numer.
Methods Eng.48(2)(2000)289–313.
[52]D.Chapelle,R.Stenberg,Stabilized?nite element formulations for shells in a bending dominated state,
SIAM J.Numer.Anal.36(1)(1999)32–73.
[53]D.Chapelle,R.Stenberg,Locking-free mixed stabilized?nite element methods for bending-dominated shells,
in:Plates Shells,CRM Proceedings Lecture Notes,Vol.21,AMS,Providence,RI,1999,pp.81–94. [54]R.A.Chaudhuri,R.L.Hsia,E ect of thickness on the large elastic deformation behavior of laminated shells,
Compos.Struct.44(2=3)(1999)117–128.
[55]R.A.Chaudhuri,et al.,On localization and propagation of kinkband instability in a long imperfect
laminated composite cylindrical shell under external pressure,Proceedings of the Fifth US National Congress Computational Mechanics,Boulder,CO,1999,p.190.
[56]S.H.Chen,et al.,A new intelligent3D thin shell element and the optimal dynamic shape control of a
paraboloid antenna,J.Vib.Control6(3)(2000)463–484.
[57]W.Chen,X.Deng,Performance of shell elements in modeling spot-welded joints,Finite Elements Anal.
Des.35(1)(2000)41–57.
[58]W.Chen,Y.K.Cheung,Re?ned non-conforming triangular elements for analysis of shell structures,Int.J.
Numer.Methods Eng.46(3)(1999)433–455.
[59]M.Cho,J.S.Kim,A postprocess method for laminated shells with a doubly curved nine-noded?nite element,
Composites Part B31(1)(2000)65–74.
[60]B.D.Choi,Y.S.Lee,Structural response of the plain weave GFRP cylindrical shell subject to low-velocity
central impact,in:Computational Techniques for Materials,Composites and Composite Structures, Civil-Comp Publ.,Edinburgh,2000,pp.121–126.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782769 [61]C.K.Choi,et al.,Defect-free4-node at shell element:NMS-4F element,Struct.Eng.Mech.8(2)(1999)
207–231.
[62]D.Choi,Computations on thin non-inhibited hyperbolic elastic shells.Benchmarks for membrane locking,
Math.Meth.Appl.Sci.22(15)(1999)1293–1321.
[63]M.Chryssanthopoulos,et al.,Validation of FE models for buckling analysis of woven GFRP shells,Compos.
Struct.49(4)(2000)355–367.
[64]J.Chung,J.M.Lee,Vibration analysis of a nearly axisymmetric shell structure using a new?nite ring
element,J.Sound Vib.219(1)(1999)35–50.
[65]F.Cirak,et al.,Subdivision surfaces:a new paradigm for thin-shell?nite element analysis,Int.J.Numer.
Methods Eng.47(12)(2000)2039–2072.
[66]https://www.doczj.com/doc/895933886.html,bescure,G.D.Galletly,Plastic buckling of complete toroidal shells of elliptical cross-section subjected
to internal pressure,Thin-Wall.Struct.34(2)(1999)135–146.
[67]A.L.Cowan,et al.,Crack path bifurcation at a tear strap in a pressured shell,Proceedings of the
41st Structures,Structural Dynamics and Materials Conference and Exhibition,AIAA,New York,2000, pp.1090–1101.
[68]M.A.Cris?eld,D.Tan,Large-strain elasto-plastic shell analysis using low-order elements,https://www.doczj.com/doc/895933886.html,put.18
(1=2)(2001)255–285.
[69]H.Darendeliler,et al.,A pseudo-layered,elastic-plastic, at-shell?nite element,Comput.Methods Appl.
Mech.Eng.174(1=2)(1999)211–218.
[70]C.J.Dekker,H.J.Brink,Nozzles on spheres with outward weld area under internal pressure analysed by
FEM and thin shell theory,Int.J.Press.Vess.Piping77(7)(2000)399–415.
[71]L.Della Croce,T.Scapolla,Solving cylindrical shell problems with a non-standard?nite element,Math.
Comput.Simulation50(1=4)(1999)153–164.
[72]L.Deng,M.Ghosn,Pseudoforce method for nonlinear analysis and reanalysis of structural systems,J.Struct.
Eng.,ASCE127(5)(2001)570–578.
[73]K.Ding,L.Tang,Three-dimensional free vibration of thick laminated cylindrical shells with clamped edges,
J.Sound Vib.220(1)(1999)171–177.
[74]M.S.Djoudi,H.Bahai,A shell?nite element for the general analysis of circular cylindrical shells,in:
B.H.V.Topping(Ed.),Finite Elements:Techiques and Developments,Civil-Comp Publ.,Edinburgh,2000,
pp.191–198.
[75]S.Doll,et al.,On volumetric locking of low-order solid and solid-shell elements for?nite elastoviscoplastic
deformations and selective reduced integration,https://www.doczj.com/doc/895933886.html,put.17(7)(2000)874–902.
[76]R.J.Donaghy,et al.,Dimensional reduction of surface models for analysis,https://www.doczj.com/doc/895933886.html,put.16(1)(2000)
24–35.
[77]H.Duan,A new mixed formulation for the shell model with free edge boundary conditions,Pure Appl.
Math.15(4)(1999)12–18.
[78]R.V.Dukkipati,R.Dong,Impact loads due to wheel ats and shells,Veh.Systems Dyn.31(1)(1999)
1–22.
[79]A.Dutta,C.V.Ramakrishnan,Accurate computation of design derivatives for plates and shells under transient
dynamic loads,https://www.doczj.com/doc/895933886.html,put.17(1)(2000)7–27.
[80]A.Dutta,et al.,Adaptive?nite element analysis of structures under transient dynamic loading using modal
superposition,Finite Elements Anal.Des.31(4)(1999)255–272.
[81]R.Eberlein,P.Wriggers,Finite element concepts for?nite elastoplastic strains and isotropic stress response
in shells:theoretical and computational analysis,Comput.Methods Appl.Mech.Eng.171(3=4)(1999) 243–279.
[82]A.Eckstein,Y.Basar,Ductile damage analysis of elasto-plastic shells at large inelastic strains,Int.J.Numer.
Methods Eng.47(10)(2000)1663–1687.
[83]A.A.El Damatty,et al.,Thermal analysis of FRP chimneys using consistent laminated shell element,
Thin-Wall.Struct.37(1)(2000)57–76.
[84]N.El-Abbasi,S.A.Meguid,On the treatment of frictional contact in shell structures using variational
inequalities,Int.J.Numer.Meth.Eng.46(2)(1999)275–295.
770J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[85]N.El-Abbasi,S.A.Meguid,Non-linear analysis of frictional contact in thick shell structures,Proceedings of
the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,pp.285–286.
[86]N.El-Abbasi,S.A.Meguid,Modeling frictional contact in shell structures using variational inequalities,Finite
Elements Anal.Des.33(4)(1999)317–334.
[87]N.El-Abbasi,S.A.Meguid,A new shell element accounting for through-thickness deformation,Comput.
Methods Appl.Mech.Eng.189(3)(2000)841–862.
[88]N.El-Abbasi,S.A.Meguid,Finite element modeling of the thermoelastic behavior of functionally graded
plates and shells,https://www.doczj.com/doc/895933886.html,put.Eng.Sci.1(1)(2000)151–165.
[89]N.El-Abbasi,et al.,Numerical and experimental investigations of contact in thin and thick rings,Int.J.
Mech.Sci.41(9)(1999)1051–1066.
[90]N.El-Abbasi,et al.,Three-dimensional?nite element analysis of saddle supported pressure vessels,Int.J.
Mech.Sci.43(5)(2001)1229–1242.
[91]A.Elhage-Hussein,et al.,A numerical continuation method based on Pade approximants,Int.J.Solids Struct.
37(46=47)(2000)6981–7001.
[92]A.Eriksson,et al.,Numerical analysis of complex instability behaviour using incremental-iterative strategies,
Comput.Methods Appl.Mech.Eng.179(3=4)(1999)265–305.
[93]M.R.Eslami,et al.,Coupled thermoelasticity of shells of revolution:e ect of normal stress and coupling,
AIAA J.37(4)(1999)496–504.
[94]H.E.Estekanchi,A.Vafai,On the buckling of cylindrical shells with through cracks under axial load,
Thin-Wall.Struct.35(4)(1999)255–274.
[95]A.J.M.Ferreira,J.T.Barbosa,Buckling behaviour of composite shells,Compos.Struct.50(1)(2000)93–98.
[96]A.J.M.Ferreira,et al.,Non-linear analysis of sandwich shells:the e ect of core plasticity,Comput.&Struct.
76(1=3)(2000)337–346.
[97]F.G.Flores,E.Onate,A basic thin shell triangle with only translational DOFs for large strain plasticity,Int.
J.Numer.Methods Eng.51(1)(2001)57–83.
[98]D.D.Fox,Transverse shear and normal stresses in nonlinear shell theory,Comput.&Struct.75(3)(2000)
313–319.
[99]F.Fujii,et al.,Static path jumping to attain postbuckling equilibria of a compressed circular cylinder,Comput.
Mech.26(3)(2000)259–266.
[100]M.Ganapathi,et al.,Parametric dynamic instability analysis of laminated composite conical shells,J.Reinf.
https://www.doczj.com/doc/895933886.html,pos.18(14)(1999)1336–1346.
[101]G.Gao,et al.,Numerical simulation and dynamic fracture criteria of thin cylindrical shells under inner explosive loading,Tsinghua Sci.Tech.5(1)(2000)13–17.
[102]A.S.Gendy,A.F.Saleeb,Nonlinear dynamics for mixed shells with large rotation and elastoplasticity,Int.
https://www.doczj.com/doc/895933886.html,put.Eng.Sci.1(1)(2000)1–31.
[103]B.Goettlicher,K.Schweizerhof,Kopplung starrer und exibler Strukturbereiche unter Verwendung ublicher Finite-Elemente-Diskretisierungen,Z.Angew.Math.Mech.80(S2)(2000)511–512.
[104]J.Gomez Garcia,et al.,Determination of the energy absorption of cylindrical shells under axial loading by analysis of the dynamic buckling and folding process,Int.J.Crashworth.4(4)(1999)351–364. [105]J.M.Greer,et al.,Nonlinear through-thickness behavior of shells using2-D?nite elements,Structures, Structural Dynamics and Materials Conference,St Louis,AIAA,1999,pp.389–395.
[106]L.N.B.Gummadi,A.N.Palazotto,Nonlinear dynamic?nite element analysis of composite cylindrical shells considering large rotations,AIAA J.37(11)(1999)1489–1494.
[107]E.Gunay,Finite element analysis of laminated sti ened cylindrical shallow shell,https://www.doczj.com/doc/895933886.html,pos.Mater.6
(6)(1999)381–395.
[108]Y.Q.Guo,et al.,Two simple triangular shell element for springback simulation after deep drawing of thin sheets,in:B.H.V.Topping(Ed.),Finite Elements:Techniques and Developments,Civil-Comp Publ., Edinburgh,2000,pp.285–298.
[109]G.Gusic,et al.,The in uence of circumferential thickness variations on the buckling of cylindrical shells under external pressure,Comput.&Struct.74(4)(2000)461–477.
[110]R.Guttal,J.Fish,Hierarchical assumed strain-vorticity shell element with drilling degrees of freedom,Finite Elements Anal.Des.33(2)(1999)61–70.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782771 [111]A.Hachemi,D.Weichert,Lower bounds for shakedown loads of damaged structures,Z.Angew.Math.
Mech.79(S2)(1999)451–452.
[112]K.Hadjeb,Analyse de la qualite des calculs de structures statiques et dynamiques par elements?nis de plaques et coques,Ph.D.Thesis,ENSAM Paris,1999.
[113]D.C.Hammerand,R.K.Kapania,Thermoviscoelastic analysis of composite structures using a triangular at shell element,AIAA J.37(2)(1999)238–247.
[114]C.S.Han,P.Wriggers,An h-adaptive method for elasto-plastic shell problems,Comput.Methods Appl.
Mech.Eng.189(2)(2000)651–671.
[115]R.Harte,et al.,On progressive damage phenomena of structures,Comput.Mech.25(4)(2000)404–412. [116]F.Hashagen,R.De Borst,Numerical assessment of delamination in?bre metal laminates,Comput.Methods Appl.Mech.Eng.185(2=4)(2000)141–159.
[117]R.Hauptmann,et al.,Vermeidung volumetrischer Versteifungse ekte bei Schalenelementen fur grosse Deformationen,Z.Angew.Math.Mech.79(S2)(1999)547–548.
[118]R.Hauptmann,et al.,Extension of the solid-shell concept for application to large elastic and large elastoplastic deformations,Int.J.Numer.Methods Eng.49(9)(2000)1121–1141.
[119]V.Havu,H.Hakula,An analysis of the approximation properties of a bilinear reduced strain element in the case of an elliptic shell,Proceedings13th Nordic Seminar on Computational Mechanics,Oslo,2000, pp.159–162.
[120]A.Hecht,et al.,Adaptive discretisation of shell problems,Z.Angew.Math.Mech.80(S2)(2000)517–518. [121]P.Helnwein,H.Mang,Uber die Sinnhaftigkeit der Untersuchung nichtlinearer statischer Stabilitatsprobleme mittels linearer Eigenwertprobleme,Z.Angew.Math.Mech.79(S2)(1999)347–348.
[122]M.Herold,V.Ulbricht,Nonlinear shell theory in convective description,Z.Angew.Math.Mech.80(S2) (2000)519–520.
[123]M.W.Hilburger,J.H.Starnes,E ects of imperfections on the buckling response of compression-loaded composite shells,Proceedings of the41st Structures,Structural Dynamics and Materials Conference and Exhibition,Atlanta,AIAA,New York,2000,pp.423–437.
[124]M.W.Hilburger,et al.,Response of composite shells with cutouts to internal pressure and compression loads, AIAA J.37(2)(1999)232–237.
[125]M.Hochrainer,et al.,Membrananalogie fur die Eigenfrequenzen acher Schalen,Z.Angew.Math.Mech.
79(S2)(1999)409–410.
[126]J.M.Holst,et al.,Imperfections in cylindrical shells resulting from fabrication mis?ts,J.Eng.Mech.,ASCE 125(4)(1999)410–418.
[127]T.Hong,et al.,Axisymmetric shells and plates on tensionless elastic foundations,Int.J.Solids Struct.36
(34)(1999)5277–5300.
[128]W.I.Hong,et al.,An assumed strain triangular solid element enriched by bubble functions,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,p.161.
[129]D.Hoogkamer,et al.,Damage tolerance of cracked cylindrical shells under internal pressure,Proceedings of the41st Structures,Structural Dynamics and Materials Conference and Exhibition,AIAA,New York,2000, pp.2134–2145.
[130]H.T.Hu,J.Y.Tsai,Maximization of the fundamental frequencies of laminated cylindrical shells with respect to?ber orientations,J.Sound Vib.225(4)(1999)723–740.
[131]M.C.Huang,C.C.Tai,The e ective factors in the warpage problem of an injection-molded part with a thin shell feature,J.Mater.Process.Technol.110(1)(2001)1–9.
[132]A.Huerta,et al.,Adaptive?nite element strategies based on error assessment,Int.J.Numer.Methods Eng.
46(10)(1999)1803–1818.
[133]K.Iqbal,S.Pellegrino,Bi-stable composite shells,Proceedings of the41st Structures,Structural Dynamics and Materials Conference and Exhibition,Atlanta,AIAA,New York,2000,pp.415–422.
[134]M.Itskov,A generalized orthotropic hyperelastic material model with application to incompressible shells, Int.J.Numer.Methods Eng.50(8)(2001)1777–1799.
[135]M.Itskov,Y.Basar,Einheitliche Formulierung von Materialmodellen fur die Finite-Element-Analyse hyperelastischer Schalen,Z.Angew.Math.Mech.79(S2)(1999)413–414.
772J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[136]S.Iwata,et al.,Ultimate strength of composite steel-concrete shell structure of an open sandwich system, Proceedings of the10th International O shore Polar Engineering Conference,Seattle,Vol.4,2000,pp.
97–102.
[137]R.Jain,et al.,Singularity in rotating orthotropic discs and shells,Int.J.Solids Struct.37(14)(2000) 2035–2058.
[138]N.Jaunky,N.F.Knight,An assessment of shell theories for buckling of circular cylindrical laminated composite panels loaded in axial compression,Int.J.Solids Struct.36(25)(1999)3799–3820.
[139]Z.Ji,et al.,Numerical modelling of thermal destruction of cylindrical shells with internal pre-pressure under laser irradiation,Comput.&Struct.71(4)(1999)359–370.
[140]D.P.Jones,et al.,Elastic-plastic failure analysis of pressure burst tests of thin toroidal shells,J.Press.Vess.
Technol.,ASME121(2)(1999)149–153.
[141]I.A.Jones,Analysis of laminated anisotropic plates and shells using symbolic computation,Int.J.Mech.Sci.
41(4=5)(1999)397–417.
[142]D.W.Jung,K.B.Yang,Comparative investigation into membrane,shell and continuum elements for the rigid-plastic?nite element analysis of2-D sheet metal forming,J.Mater.Process.Technol.104(3)(2000) 185–190.
[143]S.Kamat,et al.,Analysis of parametrically excited laminated composite joined conical-cylindrical shells, Comput.&Struct.79(1)(2001)65–76.
[144]D.Karagiozova,et al.,Inertia e ects in axisymmetrically deformed cylindrical shells under axial impact,Int.
J.Impact Eng.24(10)(2000)1083–1115.
[145]J.A.Keeney,P.T.Williams,Fracture analysis of ductile crack growth in weld material from a full-thickness clad RPV shell segment,ASTM Special Publication,No.1332,1999,pp.851–861.
[146]N.Kerdid,P.M.Eiroa,Conforming?nite element approximation for shells with little regularity,Comput.
Methods Appl.Mech.Eng.188(1=3)(2000)95–107.
[147]M.Kheyrkhahan,R.Peek,Postbuckling analysis and imperfection sensitivity of general shells by the?nite element method,Int.J.Solids Struct.36(18)(1999)2641–2681.
[148]J.G.Kim,Y.Y.Kim,A higher-order hybrid-mixed harmonic shell-of-revolution element,Comput.Methods Appl.Mech.Eng.182(1=2)(2000)1–16.
[149]J.G.Kim,Y.Y.Kim,Higher-order hybrid-mixed axisymmetric thick shell element for vibration analysis,Int.
J.Numer.Methods Eng.51(2)(2001)241–252.
[150]J.H.Kim,et al.,An assumed strain formulation of e cient solid triangular element for general shell analysis, Int.J.Numer.Methods Eng.47(8)(2000)1481–1497.
[151]S.Klinkel,An e cient3D-shell element for thin shell structures,Z.Angew.Math.Mech.79(S2)(1999) 553–554.
[152]S.Klinkel,et al.,A continuum based three-dimensional shell element for laminated structures,Comput.& Struct.71(1)(1999)43–62.
[153]S.Klinkel,et al.,A continuum based3D-shell element for computation of laminated structures and?nite strain plasticity problems,in:Computational Techniques for Materials,Composites and Composite Structures, Civil-Comp Publ.,Edinburgh,2000,pp.297–310.
[154]W.B.Kraetzig,S.Y.Noh,Computational failure analysis of reinforced concrete shells,Proceedings of the Fifth US National Congress Computational Mechanics,Boulder,CO,1999,pp.35–36.
[155]T.Krauthammer,S.E.Swartz,Observed?nite element capabilities and limitations from multi-team simulations of three concrete shell structures,Comput.&Struct.71(3)(1999)277–291.
[156]I.Kreja,et al.,Modeling and FE-simulation of plastic ductile damage evolution in plates and shells,Arch.
Appl.Mech.71(2=3)(2001)146–163.
[157]R.Krueger,T.K.O’Brien,A shell=3D modeling technique for the analysis of delaminated composite laminates,Composites Part A32(1)(2001)25–44.
[158]D.Kuhl, E.Ramm,Shell dynamics of enhanced assumed strain elements for the generalized energy-momentum method,Proceedings of the Fifth US National Congress of Computational Mechanics, Boulder,CO,1999,pp.51–52.
[159]D.Kuhl,E.Ramm,Generalized energy-momentum method for non-linear adaptive shell dynamics,Comput.
Methods Appl.Mech.Eng.178(3=4)(1999)343–366.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782773 [160]R.R.Kumar,et al.,Analytical solution for W-N criteria for the prediction of notched strength of an orthotropic shell,J.Appl.Mech.,ASME68(2)(2001)344–346.
[161]W.P.P.Kumar,R.Palaninathan,Explicit through-thickness integration schemes for geometric nonlinear analysis of laminated composite shells,Finite Elements Anal.Des.32(4)(1999)235–256.
[162]https://www.doczj.com/doc/895933886.html,ckner,H.Mang,Adaptivity in computational mechanics of concrete plates and shells,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,pp.323–324. [163]https://www.doczj.com/doc/895933886.html,ckner,H.A.Mang,Adaptive ultimate load analysis of RC shells,Comput.Assist.Mech.Eng.Sci.7
(4)(2000)641–666.
[164]https://www.doczj.com/doc/895933886.html,ing,et al.,The post-processed Galerkin method applied to non-linear shell vibrations,Dyn.Stab.
Systems14(2)(1999)163–181.
[165]https://www.doczj.com/doc/895933886.html,siecka,R.Marchand,Optimal error estimates for FEM approximations of dynamic nonlinear shallow shells,Math.Modelling Numer.Anal.34(1)(2000)63–84.
[166]C.Lee,J.Cao,Shell element formulation of multi-step inverse analysis for axisymmetric deep drawing process,Int.J.Numer.Methods Eng.50(3)(2001)681–706.
[167]C.K.Lee,et al.,On using degenerated solid shell elements in adaptive re?nement analysis,Int.J.Numer.
Methods Eng.45(6)(1999)627–659.
[168]D.G.Lee,J.B.Kosmatka,Passively damped vibration of rotating curved laminated shells using zigzag triangular element,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder, CO,1999,p.158.
[169]S.J.Lee,S.E.Han,Free-vibration analysis of plates and shells with a nine-node assumed natural degenerated shell element,J.Sound Vib.241(4)(2001)605–633.
[170]Y.S.Lee,et al.,A study on the free vibration of the joined cylindrical-spherical shell structures,in: Computational Civil and Structural Engineering,Civil-Comp Publ.,Edinburgh,2000,pp.143–149. [171]D.Lemosse,G.Dhatt,Study of shell like structures by brick FEM,in:B.H.V.Topping(Ed.),Finite Elements: Techniques Developments,Civil-Comp Publ.,Edinburgh,2000,pp.183–190.
[172]M.Li,F.Zhan,The?nite deformation theory for beam,plate and shell.Part IV:The FE formulation of Mindlin plate and shell based on Green-Lagrangian strain,Comput.Methods Appl.Mech.Eng.182(1=2) (2000)187–203.
[173]M.Li,F.Zhan,The?nite deformation theory for beam,plate and shell.Part V:The shell element with drilling degree of freedom based on Biot strain,Comput.Methods Appl.Mech.Eng.189(3)(2000)743–759. [174]K.M.Liew,Z.C.Feng,Vibration characteristics of conical shell panels with three-dimensional exibility,J.
Appl.Mech.,ASME67(2)(2000)314–320.
[175]K.M.Liew,et al.,Three-dimensional vibration of cylindrical shell panels-solution by continuum and discrete approaches,Comput.Mech.26(2)(2000)208–221.
[176]C.W.Lim,S.Kitipornchai,E ects of subtended and vertex angles on the free vibration of open conical shell panels:a conical coordinate approach,J.Sound Vib.219(5)(1999)813–835.
[177]G.H.Lim,Vibration of plates and shells using?nite elements(1996–1997),Finite Elements Anal.Des.31
(3)(1999)223–230.
[178]C.Liu,Y.Xu,Singularity intensity factor calculation in plates and shells based on the singular line mapping technique in FEMOL,Key Eng.Mater.183–187(2000)151–156.
[179]J.Liu,et al.,A four-node,shear-deformable shell element developed via explicit Kirchho constraints,Int.
J.Numer.Methods Eng.49(8)(2000)1065–1086.
[180]R.Liu,et al.,Crack closure in spherical shells,Int.J.Fract.99(4)(1999)307–323.
[181]A.Liverani,et al.,Towards interactive?nite element analysis of shell structures in virtual reality,IEEE Int.
https://www.doczj.com/doc/895933886.html,.Visual.,IEEE,1999,pp.340–346.
[182]Y.Luo,et al.,Nonlinear discrete foundation model in thin shells buckling on elastic foundation,J.Tongji Univ.,China27(1)(1999)6–10.
[183]J.Mackerle,Finite element vibration analysis of beams,plates and shells,a bibliography(1994–1998),Shock Vib.6(2)(1999)97–109.
[184]J.Mackerle,Finite element linear and nonlinear,static and dynamic analysis of structural elements—an addendum,a bibliography(1996–1999),https://www.doczj.com/doc/895933886.html,put.17(3)(2000)274–360.
774J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[185]M.Malinen,J.Pitkaranta,A benchmark study of reduced-strain shell?nite elements:quadratic schemes,Int.
J.Numer.Methods Eng.48(11)(2000)1637–1671.
[186]P.Mandal,C.R.Calladine,Buckling of thin cylindrical shells under axial compression,Int.J.Solids Struct.
37(33)(2000)4509–4525.
[187]M.Manjuprasad,et al.,Non-linear dynamic response of a reinforced concrete secondary containment shell subjected to seismic load,Eng.Struct.23(5)(2001)397–406.
[188]R.Marchand,Uniform boundary stabilization of nonlinear spherical shells by using two controls only:analysis and numerical computations,https://www.doczj.com/doc/895933886.html,put.Appl.Math.114(1)(2000)189–216.
[189]A.Masud,C.L.Tham,Three-dimensional co-rotational framework for elasto-plastic analysis of multilayered composite shells,AIAA J.38(12)(2000)2320–2327.
[190]A.Masud,et al.,A stabilized3-D co-rotational formulation for geometrically nonlinear analysis of multi-layered composite shells,Comput.Mech.26(1)(2000)1–12.
[191]K.M.Mathisen,et al.,Error estimation and adaptivity in explicit nonlinear?nite element simulation of quasi-static problems,Comput.&Struct.72(4=5)(1999)627–644.
[192]H.Matthies,C.Bucher,Finite elements for stochastic media problems,Comput.Methods Appl.Mech.Eng.
168(1=4)(1999)3–17.
[193]K.Mattiasson,Prediction of necking failure in sheet metals with special reference to shell element formulation, Proceedings of the Second European LS-DYNA Conference,Gothenburg,Sweden,1999,pp.C3–11. [194]G.Michel,et al.,Buckling of cylindrical shells under static and dynamic shear loading,Eng.Struct.22(5) (2000)535–543.
[195]G.Michel,et al.,Finite element simulation of dynamic buckling of cylinders subjected to periodic shear, Thin-Wall.Struct.36(2)(2000)111–135.
[196]C.Miehe,J.Schroder,Energy and momentum conserving elastodynamics of a non-linear brick-type mixed ?nite shell element,Int.J.Numer.Methods Eng.50(8)(2001)1801–1823.
[197]L.P.Mikkelsen,A numerical axisymmetric collapse analysis of viscoplastic cylindrical shells under axial compression,Int.J.Solids Struct.36(5)(1999)643–668.
[198]L.Minnetyan,C.C.Chamis,Damage tolerance of large shell structures,J.Press.Vess.Technol.,ASME121
(2)(1999)188–195.
[199]S.Mohammadi,et al.,Performance of the anisotropic Morley shell element in dynamic large deformation analysis,Commun.Numer.Methods Eng.15(6)(1999)445–455.
[200]H.Mojia,H.Bu er,Updated Lagrangian polar decomposition method in non-linear elasticity and its shell element implementation,Commun.Numer.Methods Eng.15(3)(1999)167–181.
[201]S.J.Molloy,et al.,Behavior of pair of leaning arch-shells under snow and wind loads,J.Eng.Mech.,ASCE 125(6)(1999)663–667.
[202]U.Montag,et al.,Increasing solution stability for?nite element modeling of elasto-plastic shell response, Adv.Eng.Software30(9=11)(1999)607–619.
[203]Y.M.Moon,et al.,Development of an automotive joint model using an analytically based formulation,J.
Sound Vib.220(4)(1999)625–640.
[204]T.Nakamura,L.C.Wu,E ects of ply-arrangement on compressive failure of layered structures,Eng.Fract.
Mech.67(5)(2000)421–443.
[205]B.F.Oliveira,G.J.Creus,Viscoelastic failure analysis of composite plates and shells,Compos.Struct.49(4) (2000)369–384.
[206]E.Onate,F.Zarate,Rotation-free triangular plate and shell elements,Int.J.Numer.Methods Eng.47(1=3) (2000)557–603.
[207]V.N.Paimushin,et al.,Methods of?nite element analysis of arbitrary buckling forms of sandwich plates and shells,https://www.doczj.com/doc/895933886.html,pos.Mater.36(4)(2000)277–286.
[208]S.H.Park,J.H.Kim,On the dynamic stability of a completely free cylindrical shell subjected to a follower force,Structures,Structural Dynamics and Materials Conference,St Louis,AIAA,New York,1999,pp.446–455.
[209]S.H.Park,J.H.Kim,Dynamic stability of a completely free circular cylindrical shell subjected to a follower force,J.Sound Vib.231(4)(2000)989–1005.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782775 [210]X.T.Pham,F.Trochu,Simulation of compression resin transfer molding to manufacture thin composite shells,https://www.doczj.com/doc/895933886.html,pos.20(3)(1999)436–459.
[211]I.F.Pinto Correia,et al.,A?nite element semi-analytical model for laminated axisymmetric shells:statics, dynamics and buckling,Comput.&Struct.76(1=3)(2000)299–317.
[212]I.F.Pinto Correia,et al.,A semianalytical higher order model:piezolaminated axisymmetric shells,in: Computational Techniques for Materials,Composites and Composite Structures,Civil-Comp Publ.,Edinburgh, 2000,pp.281–290.
[213]J.Pitkaranta,et al.,Fourier mode analysis of layers in shallow shell deformations,Comput.Methods Appl.
Mech.Eng.190(22)(2001)2943–2975.
[214]A.S.Plouin,E.Balmes,Steel=viscoelastic=steel sandwich shells computational methods and experimental validations,Proc.SPIE4062(2000)384–390.
[215]E.Providas,M.A.Kattis,A simple?nite element model for the geometrically nonlinear analysis of thin shells,Comput.Mech.24(2)(1999)127–137.
[216]E.Providas,M.A.Kattis,An assessment of two fundamental at triangular shell elements with drilling rotations,Comput.&Struct.77(2)(2000)129–139.
[217]Z.Qun,et al.,Application of the generalized conforming at shell element to geometrical non-linear analysis for composite sti ened shell structures,Commun.Numer.Methods Eng.15(6)(1999)399–412. [218]K.S.S.Ram,T.S.Babu,Study of bending of laminated composite shells.Part I:shells without a cutout, Compos.Struct.51(1)(2001)103–116.
[219]K.S.S.Ram,T.S.Babu,Study of bending of laminated composite shells.Part II:shells with a cutout,Compos.
Struct.51(1)(2001)117–126.
[220]E.Ramm,From Reissner plate theory to three dimensions in large deformation shell analysis,Z.Angew.
Math.Mech.80(1)(2000)61–68.
[221]C.C.Rankin,et al.,Line-to-line contact behavior of shell structures,Structures,Structural Dynamics and Materials Conference,St Louis,AIAA,1999,pp.396–402.
[222]A.O.Rasskazov,A.V.Kozlov,Nonaxisymmetric vibrations of a shell of revolution made of a viscoelastic material under nonstationary loading,Strength Mater.31(3)(1999)260–266.
[223]P.Raveendranath,et al.,A two-node curved axisymmetric shell element based on coupled displacement method,Int.J.Numer.Methods Eng.45(7)(1999)921–935.
[224]M.C.Ray,et al.,Active constrained layer damping of thin cylindrical shells,J.Sound Vib.240(5)(2001) 921–935.
[225]R.Rikards,et al.,Analysis for buckling and vibrations of composite sti ened shells and plates,Compos.
Struct.51(4)(2001)361–370.
[226]R.Rolfes,K.Rohwer,Integrated thermal and mechanical analysis of composite plates and shells,Comput.
Sci.Technol.60(11)(2000)2097–2106.
[227]G.A.Rombach,Anwendung der Finite-Elemente-Methode im Betonbau Fehlerquellen und ihre Vermeidung, Ernst&Sohn,Berlin,2000.
[228]C.A.Rose,et al.,Nonlinear local bending response and bulging factors for longitudinal cracks in pressurized cylindrical shells,1999Structures,Structural Dynamics and Materials Conference and Exhibition,St Louis, AIAA,New York,1999,pp.1791–1800.
[229]C.T.F.Ross,et al.,Plastic collapse of circular conical shells under uniform external pressure,Adv.Eng.
Software30(9=11)(1999)631–647.
[230]A.S.Sakharov,et al.,On features of numerical integration for the equations of motion of laminated shell systems in the iterative analytic theory,Chem.Week161(11)(1999)713–718.
[231]A.Samanta,M.Mukhopadhyay,Finite element large de ection static analysis of shallow and deep sti ened shells,Finite Elements Anal.Design33(3)(1999)187–208.
[232]E.Sanchez-Palencia,On sensitivity and related phenomena in thin shells which are not geometrically rigid, Math.Models Methods Appl.Sci.9(1)(1999)139–160.
[233]Z.F.Sang,et al.,E ect of gap between pad and vessel for moment loading on nozzle,J.Press.Vess.Tech., ASME121(2)(1999)225–231.
776J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[234]C.Sansour,F.G.Kollmann,Families of4-node and9-node?nite elements for a?nite deformation shell theory.An assessment of hybrid stress,hybrid strain and enhanced element,Comput.Mech.24(6)(2000) 435–447.
[235]B.Schieck,W.M.Smolenski,Large strain deformations of shells with plastic anisotropies,Z.Angew.Math.
Mech.79(S2)(1999)577–578.
[236]B.Schieck,et al.,A shell?nite element for large strain elastoplasticity with anisotropies Part I:shell theory and variational principle,Int.J.Solids Struct.36(35)(1999)5399–5424.
[237]B.Schieck,et al.,A shell?nite element for large strain elastoplasticity with anisotropies Part II:constitutive equations and numerical applications,Int.J.Solids Struct.36(35)(1999)5425–5451.
[238]S.Schley,C.Miehe,Brick-type axisymmetric mixed?nite shell elements for large-strain inelastic stress analysis,Z.Angew.Math.Mech.79(S2)(1999)579–580.
[239]K.Schweizerhof,et al.,On applications of adaptive strategies for general shell structures in large deformation analysis using LS-DYNA,Proceedings of the Fifth US National Congress of Computational Mechanics, Boulder,CO,1999,p.347.
[240]M.Seitzberger,F.G.Rammerstorfer,Study of axisymmetric crushing mechanisms by sequential limit analysis, Int.J.Crashworth.4(4)(1999)379–393.
[241]G.S.Sekhon,R.S.Bhatia,Generation of exact sti ness matrix for a spherical shell element,Comput.& Struct.74(3)(2000)335–349.
[242]M.S.Shah,T.Kant,Finite element analysis of?bre reinforced polymer shells using higher-order shear deformation theories on parallel distributed memory machines,https://www.doczj.com/doc/895933886.html,put.Appl.Technol.12(2=5) (1999)206–210.
[243]M.Shakeri,et al.,Elasticity solution and free vibrations analysis of laminated anisotropic cylindrical shells, Struct.Eng.Mech.7(2)(1999)181–202.
[244]X.Shi,et al.,Simulation of sheet metal forming by a one-step approach:choice of element,J.Mater.Process.
Technol.108(3)(2001)300–306.
[245]L.Siad,Buckling of thin-walled cylindrical shells under uniform external pressure.Application to corrugated tin cans,Thin-Wall.Struct.35(2)(1999)101–115.
[246]B.Sivasubramonian,et al.,Free vibration of longitudinally sti ened curved panels with cutout,J.Sound Vib.
226(1)(1999)41–55.
[247]B.Skallerud,Numerical analysis of cracked inelastic shells with large displacements or mixed mode loading, Int.J.Solids Struct.36(15)(1999)2259–2283.
[248]B.Skallerud,B.Haugen,Collapse of thin shell structures-stress resultant plasticity modelling within a co-rotated ANDES?nite element formulation,Int.J.Numer.Methods Eng.46(12)(1999)1961–1986. [249]B.Skallerud,Z.L.Zhang,Finite element modelling of cracked inelastic shells with large de ections: two-dimensional and three-dimensional approaches,Fatigue Fract.Eng.Mater.Struct.23(3)(2000)253–261. [250]V.N.Skopinsky,Theoretical analysis of composite shell intersections,J.Strain Anal.Eng.Des.34(2)(1999) 107–116.
[251]V.N.Skopinsky,Stresses in ellipsoidal pressure vessel heads with noncentral nozzle,Nucl.Eng.Des.198
(3)(2000)317–323.
[252]V.N.Skopinsky,Stress concentration in cone-cylinder intersection,Int.J.Press.Vess.Piping78(1)(2001) 35–41.
[253]J.Soric,et al.,A new formulation of numerical algorithms for modelling of elastoplastic cyclic response of shell-like structures,Comput.&Struct.78(1=3)(2000)161–168.
[254]A.Spagnoli,M.Chryssanthopoulos,Buckling design of stringer-sti ened conical shells in compression,J.
Struct.Eng.,ASCE125(1)(1999)40–48.
[255]A.Spagnoli,M.Chryssanthopoulos,Elastic buckling and postbuckling behaviour of widely-sti ened conical shells under axial compression,Eng.Struct.21(9)(1999)845–855.
[256]W.Sprenger,et al.,Delamination growth analysis in laminated structures with continuum-based3D-shell elements and a viscoplastic softening model,Comput.Methods Appl.Mech.Eng.185(2=4)(2000) 123–139.
[257]G.R.Stuhne,One-dimensional dynamics of zonal jets on rapidly rotating spherical shells,Physica D149 (1=2)(2001)43–79.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782777 [258]X.Z.Suo,et al.,Energy release rate along any crack front in the thickness direction of shell elements,Int.
J.Solids Struct.37(6)(2000)835–856.
[259]R.M.Sydenstricker,https://www.doczj.com/doc/895933886.html,ndau,A study of some triangular discrete Reissner-Mindlin plate and shell elements, Comput.&Struct.78(1=3)(2000)21–33.
[260]K.Y.Sze,S.J.Zheng,A hybrid stress nine-node degenerated shell element for geometric nonlinear analysis, Comput.Mech.23(5=6)(1999)448–456.
[261]K.Y.Sze,D.Zhu,A quadratic assumed natural strain curved triangular shell element,Comput.Methods Appl.Mech.Eng.174(1=2)(1999)57–71.
[262]A.Tabiei,R.Tanov,A nonlinear higher order shear deformation shell element for dynamic explicit analysis.
Part I-Formulation and?nite element equations,Finite Elements Anal.Des.36(1)(2000)17–37. [263]A.Tabiei,R.Tanov,A nonlinear higher order shear deformation shell element for dynamic explicit analysis.
Part II-Performance validation through standard tests,Finite Elements Anal.Des.36(1)(2000)39–50. [264]A.Tabiei,et al.,Numerical simulation of cylindrical laminated shells under impulsive lateral pressure,AIAA J.37(5)(1999)629–633.
[265]R.Tanov,A.Tabiei,Finite element implementation of a new sandwich homogenization procedure,Compos.
Struct.50(1)(2000)49–58.
[266]R.Tanov,A.Tabiei,A simple correction to the?rst-order shear deformation shell?nite element formulations, Finite Elements Anal.Des.35(2)(2000)189–197.
[267]B.G.Teng,et al.,Experimental and numerical simulation of hydro-forming toroidal shells with di erent initial structure,Int.J.Press.Vess.Piping78(1)(2001)31–34.
[268]J.G.Teng,C.Y.Song,Numerical models for nonlinear analysis of elastic shells with eigenmode-a ne imperfections,Int.J.Solids Struct.38(18)(2001)3263–3280.
[269]I.Tiller,et al.,Adaptive analysis of non-linear shell problems,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,p.368.
[270]I.Tiller,et al.,Adaptive methods for shell problems with geometric and material nonlinearities,Proceedings of the13th Nordic Seminar of Computational Mechanics,Oslo,2000,pp.56–59.
[271]C.W.S.To,M.L.Liu,Large nonstationary random responses of shell structures with geometrical and material nonlinearities,Finite Elements Anal.Des.35(1)(2000)59–77.
[272]C.W.S.To,M.L.Liu,Geometrically nonlinear analysis of layerwise anisotropic shell structures by hybrid strain based lower order elements,Finite Elements Anal.Des.37(1)(2001)1–34.
[273]C.W.S.To,B.Wang,Hybrid strain based geometrically nonlinear laminated composite triangular shell?nite elements,Finite Elements Anal.Des.33(2)(1999)83–124.
[274]A.Vafai,H.E.Estekanchi,A parametric?nite element study of cracked plates and shells,Thin-Wall.Struct.
33(3)(1999)211–229.
[275]V.E.Verijenko,et al.,Re?ned theory of laminated anisotropic shells for the solution of thermal stress problems,J.Therm.Stress.22(1)(1999)75–100.
[276]T.Vilhelmsen,Reference stress solutions of at end to cylindrical shell connection and comparison with design stresses predicted by codes,Int.J.Press.Vess.Piping77(1)(2000)35–39.
[277]L.Vu-Quoc,I.K.Ebcioglu,Multilayer shells:geometrically-exact formulation of equation of motion,Int.J.
Solids Struct.37(45)(2000)6705–6737.
[278]L.Vu-Quoc,et al.,Geometrically-exact sandwich shells:the static case,Comput.Methods Appl.Mech.Eng.
189(1)(2000)167–203.
[279]L.Vu-Quoc,et al.,Geometrically exact sandwich shells:the dynamic case,Comput.Methods Appl.Mech.
Eng.190(22)(2001)2825–2873.
[280]B.Wang,N.Hu,Study of a spherical shell with a surface crack by the line-spring model,Eng.Struct.22
(8)(2000)1006–1012.
[281]C.Wang,https://www.doczj.com/doc/895933886.html,i,Prediction of natural frequencies of?nite length circular cylindrical shells,Appl.Acoust.
59(4)(2000)385–400.
[282]X.Wang,et al.,Theoretical solution and?nite element solution for an orthotropic thick cylindrical shell under impact load,J.Sound Vib.236(1)(2000)129–140.
778J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[283]B.L.Wardle,https://www.doczj.com/doc/895933886.html,gace,Response of transversely-loaded composite shells:bifurcation,limit point buckling, and dynamic collapse,Proceedings of the1999Structures,Structural Dynamics and Materials Conference and Exhibition,St Louis,AIAA,New York,1999,pp.1076–1090.
[284]B.L.Wardle,https://www.doczj.com/doc/895933886.html,gace,Bifurcation,limit-point buckling,and dynamic collapse of transversely loaded composite shells,AIAA J.38(3)(2000)507–516.
[285]K.Wisniewski,E.Turska,Kinematics of?nite rotation with in-plane twist parameter,Comput.Methods Appl.Mech.Eng.190(8=10)(2000)1117–1135.
[286]J.C.Wohlever,Some computational aspects of a group theoretic?nite element approach to the buckling and postbuckling analyses of plates and shells of revolution,Comput.Methods Appl.Mech.Eng.170(3=4) (1999)373–406.
[287]P.Wriggers,et al.,On non-linear dynamics of rods and shells,Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,p.51.
[288]W.Wunderlich,U.Albertin,Analysis and load carrying behaviour of imperfection sensitive shells,Int.J.
Numer.Methods Eng.47(1=3)(2000)255–273.
[289]M.Xue,et al.,Analytical solution for cylindrical thin shells with normally intersecting nozzles due to external moments on the ends of shells,Sci.China Ser.A42(3)(1999)293–304.
[290]M.D.Xue,et al.,Stress analysis of cylindrical shells with nozzles due to external run pipe moments,J.
Strain Anal.Eng.Des.35(3)(2000)159–170.
[291]K.Yamazaki,J.Han,Maximization of the crushing energy absorption of cylindrical shells,Adv.Eng.
Software31(6)(2000)425–434.
[292]G.Yang,et al.,Error analysis of mixed?nite elements for cylindrical shells,in:Plates Shells,CRM Proceedings Lecture Notes,Vol.21,AMS,Providence,RI,1999,pp.267–280.
[293]H.T.Y.Yang,et al.,A survey of recent shell?nite elements,Int.J.Numer.Methods Eng.47(1=3)(2000) 101–127.
[294]A.A.Yazdani,et al.,Stress recovery and error estimation for shell structures,Int.J.Numer.Methods Eng.
47(11)(2000)1825–1840.
[295]M.K.Yeh,et al.,Bending buckling of an elastoplastic cylindrical shell with a cutout,Eng.Struct.21(11) (1999)996–1005.
[296]J.W.Yoon,et al.,Elasto-plastic?nite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials,Comput.Methods Appl.Mech.Eng.174(1=2) (1999)23–56.
[297]R.D.Young,et al.,Nonlinear bulging factors for longitudinal and circumferential cracks in cylindrical shells subjected to combined loads,Proceedings of the41st Structures,Structural Dynamics and Materials Conference and Exhibition,AIAA,New York,2000,pp.1064–1078.
[298]J.Z.Yuan,et al.,Stress projection,layerwise-equivalent,formulation for accurate predictions of transverse stresses in laminated plates and shells,https://www.doczj.com/doc/895933886.html,put.Eng.Sci.1(1)(2000)91–138.
[299]S.Yuan,et al.,Finite element analysis of hydro-forming process of a toroidal shell,Int.J.Mach.Tools Manuf.39(9)(1999)1439–1450.
[300]S.W.Yuen,G.M.Van Erp,Transient analysis of thin-walled structures using macro spline?nite elements, Eng.Struct.21(3)(1999)255–266.
[301]H.Zahrouni,et al.,Computing?nite rotations of shells by an asymptotic-numerical method,Comput.Methods Appl.Mech.Eng.175(1=2)(1999)71–85.
[302]G.Zboinski,W.Ostachowicz,An algorithm of a family of3D-based solid-to-shell transition,hpq=hp adaptive ?nite elements,J.Theoret.Appl.Mech.38(4)(2000)791–806.
[303]S.Zhang,et al.,Experimental investigation and computer simulation on dynamic buckling behavior of liquid-?lled cylindrical shells under axial impact,Acta Mech.Solida Sinica13(2)(2000)166–172. [304]S.Zhang,et al.,Stability analysis of cylindrical shells using re?ned non-conforming rectangular cylindrical shell elements,Int.J.Numer.Methods Eng.50(12)(2001)2707–2726.
[305]S.H.Zhang,et al.,Numerical simulation of plastic deformation of pressurized oblate spheroid-inscribed single-curvature shells,J.Manuf.Sci.Eng.,ASME122(1)(2000)235–243.
[306]W.Zhang,et al.,Post-buckling analysis of shell and membrane structures by dynamic relaxation method, Comput.Mech.26(3)(2000)267–272.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782779 [307]X.M.Zhang,et al.,Vibration analysis of thin cylindrical shells using wave propagation approach,J.Sound Vib.239(3)(2001)397–403.
[308]Y.X.Zhang,et al.,Two re?ned non-conforming quadrilateral at shell elements,Int.J.Numer.Methods Eng.49(3)(2000)355–382.
[309]Z.H.Zhong,et al.,An accurate and e cient shell element with improved reduced integration rules,Struct.
Eng.Mech.8(6)(1999)591–605.
[310]A.Zubaydi,et al.,On the use of the autocorrelation function to identify the damage in the side shell of a ship’s hull,Mar.Struct.13(6)(2000)537–551.
Finite element methods:theses,reviews and books
[311]T.Aksu,A?nite element formulation for moderately thick shells of general shape,Ph.D.Thesis,Tech.Univ.
of Istanbul,1993.
[312]U.Andel?nger,Untersuchungen zur Zuverlassigkeit hybrid gemischter?niter Elemente fur Flachentragwerke, Ph.D.Thesis,Univ.of Stuttgart,1991.
[313]I.Arregui,Une formulation euleurienne pour la simulation des coques minces en grands deplacements,Thesis, Ecole Centrale de Paris,1994.
[314]R.Ayad,Elements Finis de Plaque et Coque en Formulation Mixte avec Projection en Cisaillement,These de Doctorat,UTC,1993.
[315]N.S.Bardell,Wave propagation in periodically sti ened plates and shells,Ph.D.Thesis,Univ.of Southampton, UK,1990.
[316]J.L.Batoz,G.S.Dhatt,Modelisation des structures par elements?nis,3Coques,Hermes Editeur,Paris,1992. [317]M.Baumann,Adaptive Finite Element Konzepte zur Analyse von Schalentragwerken,Ph.D.Thesis,Report No.13,Inst fur Baustatik,Karlsruhe,1994.
[318]S.Ben Jemia,New?nite elements for the analysis of sti ened shells of arbitrary shape,Ph.D.Thesis,Univ.
of Wisconsin-Madison,1991.
[319]A.Benjeddou,A B-spline?nite element method for the analysis of homogeneous and sandwich shells with elastic and viscoelastic core,Ph.D.Thesis,Univ.Technol.de Compiegne,France,1994.
[320]M.Bernadou,Finite Element Methods for Thin Shell Problems,Wiley,Chichester,1996.
[321]P.Betsch,Statische und dynamische Berechnungen von Schalen endlicher elastischer Deformationen mit gemischten Finiten Elementen,Dissert,Universitat Hannover,1996.
[322]R.O.Bjaerum,Finite element formulations and solution algorithms for buckling and collapse analysis of thin shells,DrIng Dissertation,The Norweg.Inst.of Tech.Trondheim,1992.
[323]A.Bout,A?nite element approach to nonlinear thin shell analysis,Ph.D.Thesis,TU Delft,1992. [324]M.L.Bucalem,On higher-order mixed-interpolated general shell?nite elements,Ph.D.Thesis,MIT,1992. [325]M.L.Bucalem,K.J.Bathe,Finite element analysis of shell structures,https://www.doczj.com/doc/895933886.html,put.Methods Eng.4(1) (1997)3–61.
[326]N.Buchter,Zusammenfuhrung von Degenerationskonzept und Schalentheorie bei endlichen Rotationen,Ph.D.
Thesis,Univ.of Stuttgart,1992.
[327]C.M.Carey,A procedure for optimal evaluation of shell?nite elements,Ph.D.Thesis,Brunel Univ.,UK, 1992.
[328]G.Caveney,An integrally sti ened semi-loof?nite element for structural analysis,M.Phil.Thesis,Newcastle Univ.,UK,1993.
[329]C.T.Chen,Geometrically nonlinear random vibrations of structures,Ph.D.Thesis,Purdue Univ.,1990. [330]S.W.Cho,On mixed-interpolated general shell?nite elements for nonlinear analysis,Ph.D.Thesis,MIT, 1991.
[331]C.K.Choi,et al.,Two-dimensional nonconforming?nite elements:a state-of-the-art,Struct.Eng.Mech.6
(1)(1998)41–61.
[332]J.Chroscielewski,et al.,Finite element analysis of smooth,folded and multi-shell structures,Comput.
Methods Appl.Mech.Eng.141(1=2)(1997)1–46.
780J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[333]A.Dorfmann,Simpli?ed3-D?nite element for analyzing thin plate=shell structures,Ph.D.Thesis,Univ.of California,Los Angeles,1992.
[334]R.Eberlein,Finite-Elemente-Konzepte fur Schalen mit grossen elastischen und plastischen Verzerrungen, Dissertion,Tech.Hochschule Darmstadt,1997.
[335]Y.C.Fu,A large element computation for polygonal plates,shallow shells and cylindrical shells with Fourier series and state-variable methods,Ph.D.Thesis,Stanford Univ.,1997.
[336]H.Gebhardt,Finite Elemente Konzepte fur schubelastische Schalen mit endlichen Rotationen,Ph.D.Thesis, Univ.of Karlsruhe,1990.
[337]W.Gilewski,M.Radwanska,A survey of?nite element models for the analysis of moderately thick shells, Finite Elements Anal.Des.9(1)(1991)1–21.
[338]M.Guenfound,Two new triangular elements for linear and geometrical nonlinear analysis of shells,Ph.D.
Thesis,Inst.Nat.Sci.Appl.,Lyon,1990.
[339]W.Guggenberger,Nonlinear buckling behaviour of cylindrical shells under local axis loads,DrTech Thesis, Tech.Univ.of Graz,Austria,1991.
[340]H.Harintho,Nonlinear local-global static analysis of shells of revolution,Ph.D.Thesis,Washington Univ., 1994.
[341]O.M.Ibrahim,A formulation of a general nine-node shell element using the mixed interpolation of tensorial components,D Eng Thesis,Cleveland State Univ.,1992.
[342]A.Ibrahimbegovic,Stress resultant geometrically exact shell theory for?nite rotations and its?nite element implementation,Appl.Mech.Rev.50(4)(1997)199–226.
[343]D.D.Jensen,Equilibrium constrained assumed natural coordinate strain?nite elements for shell analysis, Ph.D.Thesis,Univ.of Colorado,Boulder,1992.
[344]T.Kant,D.Datye,Finite elements available for the analysis of curved thin-walled structures,in:J.Bull (Ed.),Finite Element Applications to Thin-Walled Structures,Elsevier,Amsterdam,1990.
[345]J.G.Kennedy,Inelasticity and mixed variational methods in classical continua and geometrically exact shells, Ph.D.Thesis,Stanford Univ.,1990.
[346]T.Kerber,Review of shell and plate?nite elements according to locking and its remedies,Rech.Aerospat.
(3)(1990)45–76.
[347]M.Kheyrkhahan,Postbuckling analysis and imperfection sensitivity of general shells by the?nite element method,Ph.D.Thesis,Univ.of Michigan,1995.
[348]J.H.Kim,Fabric mechanics analysis using large deformation orthotropic shell theory,Ph.D.Thesis,North Carolina State Univ.,1991.
[349]W.B.Kratzig,E.Onate(Eds.),Computational Mechanics of Nonlinear Response of Shells,Springer,New York,1990.
[350]S.N.Krivoshapko,Static analysis of shells with developable middle surfaces,Appl.Mech.Rev.51(12) (1998)731–746.
[351]S.Kumaresan,et al.,Mixed models in?nite element analysis,Comput.&Struct.51(1)(1994)117–123. [352]https://www.doczj.com/doc/895933886.html,u,Adaptive?nite element analysis for shell structures,Ph.D.Thesis,The Univ.of Hong Kong,1995. [353]K.L.Lee,Three-dimensional inelastic analysis of constructed facilities,Ph.D.Thesis,Univ.of Cincinnati, 1991.
[354]S.J.Lee,Analysis and optimization of shells,Ph.D.Thesis,Univ.of Wales,Swansea,1998.
[355]I.Leviathan,On three and four node?nite elements for shells,Ph.D.Thesis,Northwestern Univ.,1993. [356]D.G.L.Liaw,Reliability study of uncertain structures using stochastic?nite elements,Ph.D.Thesis,Purdue Univ.,1990.
[357]M.Liu,Response statistics of shell structures with geometrical and material nonlinearities,Ph.D.Thesis,The Univ.of Western Ontario,Canada,1993.
[358]R.H.MacNeal,Perspective on?nite elements for shell analysis,Finite Elements Anal.Des.30(3)(1998) 175–186.
[359]S.Mirza,Recent research in vibration of layered shells,J.Press.Vess.Tech.,ASME113(2)(1991)321–325. [360]M.A.Mohamedien,The buckling of grid shells,Ph.D.Thesis,Univ.of Bath,UK,1990.
[361]S.A.Mourad,Modal analysis and buckling e ects on steel structures under dynamic loading,Ph.D.Thesis, Univ.of California,Irvine,1990.
J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782781 [362]A.I.Mousa,Finite element analysis of shell structures,Ph.D.Thesis,Univ.of Wales,1991.
[363]J.Nowinka,Applications of the geometric-?nite element method in the analysis of elastic-plastic shells subjected to large deformations,Ph.D.Thesis,Univ.of Calgary,Canada,1991.
[364]K.M.Okstad,Adaptive methods for nonlinear?nite element analysis of shell structures,DrIng Thesis,The Norweg.Inst.of Tech.,Trondheim,1994.
[365]R.Phaal,A two-surface computational model for the analysis of thin shell structures,Ph.D.Thesis,Univ.of Cambridge,UK,1990.
[366]R.Phaal,C.R.Calladine,A simple class of?nite elements for plate and shell problems.II:an element for thin shells,with only translational degrees of freedom,Int.J.Numer.Methods Eng.35(5)(1992)979–996. [367]C.D.Pionke,Convergence of?nite elements based on the Hu-Washizu variational theorem with minimal compatibility,Ph.D.Thesis,Georgia Inst.of Tech.,1993.
[368]P.N.Poulsen,Nonlinear plate and shell elements for structural analysis,Ph.D.Thesis,Tech.Univ.of Denmark,1997.
[369]E.Ramm,et al.,Higher order nonlinear shell formulations-a step back into three dimensions,in:K.Bell (Ed.),From FEs to the Troll.Platf.,Trondheim,1994,pp.65–88.
[370]F.G.Rammerstorfer(Ed.),Nonlinear Analysis of Shells by Finite Elements,Courses Lecture No.328, Springer,Berlin,1992.
[371]R.V.Ravichandran,Nonlinear local-global analysis of shells of revolution,Ph.D.Thesis,Washington Univ., 1993.
[372]M.S.Rifai,Static and dynamic?nite element analysis of?nite deformation geometrically exact shell models, Ph.D.Thesis,Stanford Univ.,1993.
[373]B.Schauder,Flambage des coques cylindriques en exion,Ph.D.Thesis,INSA de Lyon,France,1997. [374]R.A.Smith,Higher-order thickness expansions for cylindrical shells,Ph.D.Thesis,Air Force Inst.Tech., 1991.
[375]Y.Song,Thermo-elastoviscoplastic postbuckling behavior of shell-like structures,Ph.D.Thesis,Georgia Inst.
of Technol.,1991.
[376]A.Starlinger,Development of e cient?nite shell elements for the analysis of sandwich structures under large deformations and global as well as local instability,DrTech Thesis,Tech.Univ.of Wien,Austria,1990. [377]H.Stolarski,et al.,A review of shell?nite elements and co-rotational theories,Comput.Mech.Adv.2(2) (1995)125–212.
[378]F.Van Keulen,On re?ned triangular plate and shell elements,Ph.D.Thesis,TU Delft,1992.
[379]Z.Q.Xia,Nonlinear analysis of damped vibration of sandwich plates and shells,Ph.D.Thesis,Univ.of Calgary,1996.
[380]H.T.Y.Yang,et al.,Advances of thin shell?nite elements and some applications-Version I,Comput.& Struct.35(4)(1990)481–504.
[381]S.Yingyeunyong,On the development of e ective mixed shell models with emphasis on large rotation=large elastic strain analyses,Ph.D.Thesis,The Univ.of Akron,1990.
Boundary element methods:papers in journals=conference proceedings and theses
[382]P.T.Chen,et al.,A symmetric formulation of coupled BEM=FEM in solving responses of submerged elastic structures for large degrees of freedom,J.Sound Vib.233(3)(2000)407–422.
[383]S.Chen,Y.Liu,A uni?ed boundary element method for the analysis of sound and shell-like structure interactions.I-Formulation and veri?cation,J.Acoust.Soc.Am.106(3)(1999)1247–1254.
[384]S.Chen,et al.,A uni?ed boundary element method for the analysis of sound and shell-like structure interactions,J.Acoust.Soc.Am.108(6)(2000)2738–2745.
[385]T.Dirgantara,M.H.Aliabadi,A new boundary element formulation for shear deformable shell analysis,Int.
J.Numer.Methods Eng.45(9)(1999)1257–1275.
[386]C.Durant,et al.,Vibroacoustic response of a thin cylindrical shell excited by a turbulent internal ow: comparison between numerical prediction and experimentation,J.Sound Vib.229(5)(2000)1115–1155.
782J.Mackerle/Finite Elements in Analysis and Design38(2002)765–782
[387]Y.Liu,S.Chen,Sound and shell-like structure interactions by the uni?ed boundary element method, Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,p.144. [388]Y.Liu,H.Fan,On the conventional boundary integral equation formulation for piezoelectric solids with defects or of thin shapes,Eng.Anal.Boundary Elements25(2)(2001)77–91.
[389]Y.Liu,et al.,Advances in the analysis of thin and layered structures by the boundary element method, Proceedings of the Fifth US National Congress of Computational Mechanics,Boulder,CO,1999,p.79. [390]S.Mukherjee,On boundary integral equations for cracked and for thin bodies,Math.Mech.Solids6(1) (2001)47–64.
[391]P.H.Wen,et al.,Plane stress and plate bending coupling in BEM analysis of shallow shells,Int.J.Numer.
Methods Eng.48(8)(2000)1107–1125.
[392]P.H.Wen,et al.,Application of dual reciprocity method to plates and shells,Eng.Anal.Boundary Elements 24(7=8)(2000)583–590.
[393]A.J.Yiotis,J.T.Katsikadelis,Static and dynamic analysis of shell panels using the analog equation method, Comput.Model.Eng.Sci.1(2)(2000)95–103.
[394]X.M.Zhang,et al.,Coupled vibration analysis of uid-?lled cylindrical shells using the wave propagation approach,Appl.Acoust.62(3)(2001)229–243.
Boundary element methods:theses,reviews and books
[395]D.E.Beskos(Ed.),Boundary Element Analysis of Plates and Shells,Springer,Berlin,1991.
[396]G.A.Chang,Transient response of a?nite submerged axisymmetric shell in a shock wave,Ph.D.Thesis, Texas A&M Univ.,1990.
[397]D.S.Pipkins,Non-linear analysis of(i)wave propagation using transform method and(ii)plates and shells using integral equations,Ph.D.Thesis,Georgia Inst.Technol.,1992.
[398]D.Ren,On the solution of thin cylindrical shells by boundary element methods,Ph.D.Thesis,The Univ.of Toledo,1993.
从实践的角度探讨在日语教学中多媒体课件的应用 在今天中国的许多大学，为适应现代化，信息化的要求，建立了设备完善的适应多媒体教学的教室。许多学科的研究者及现场教员也积极致力于多媒体软件的开发和利用。在大学日语专业的教学工作中，教科书、磁带、粉笔为主流的传统教学方式差不多悄然向先进的教学手段而进展。 一、多媒体课件和精品课程的进展现状 然而，目前在专业日语教学中能够利用的教学软件并不多见。比如在中国大学日语的专业、第二外語用教科书常见的有《新编日语》（上海外语教育出版社）、《中日交流标准日本語》（初级、中级）（人民教育出版社）、《新编基础日语（初級、高級）》（上海译文出版社）、《大学日本语》（四川大学出版社）、《初级日语》《中级日语》（北京大学出版社）、《新世纪大学日语》（外语教学与研究出版社）、《综合日语》（北京大学出版社）、《新编日语教程》（华东理工大学出版社）《新编初级（中级）日本语》（吉林教育出版社）、《新大学日本语》（大连理工大学出版社）、《新大学日语》（高等教育出版社）、《现代日本语》（上海外语教育出版社）、《基础日语》（复旦大学出版社）等等。配套教材以录音磁带、教学参考、习题集为主。只有《中日交流標準日本語（初級上）》、《初級日语》、《新编日语教程》等少数教科书配备了多媒体DVD视听教材。 然而这些试听教材，有的内容为日语普及读物，并不适合专业外语课堂教学。比如《新版中日交流标准日本语（初级上）》，有的尽管DVD视听教材中有丰富的动画画面和语音练习。然而，课堂操作则花费时刻长，不利于教师重点指导，更加适合学生的课余练习。比如北京大学的《初级日语》等。在这种情形下，许多大学的日语专业致力于教材的自主开发。 其中，有些大学的还推出精品课程，取得了专门大成绩。比如天津外国语学院的《新编日语》多媒体精品课程为2007年被评为“国家级精品课”。目前已被南开大学外国语学院、成都理工大学日语系等全国40余所大学推广使用。
现在完成时讲解和练习 1. 现在完成时的构成: have\has+过去分词(过去分词的构成有规则变化和不规则变化) 2. 现在完成时的四个基本句型 肯定句He has finished the work. 一般疑问句Has he finished the work? 回答Yes ,he has. No, he hasn’t. 否定句He has not finished the work. 特殊疑问句What has he done? 3.现在完成时的用法: A．表示过去发生或已经完成的动作对现在造成的影响或结果，强调对现在造成的影想或结果）。例如：The car has arrived. 车子来了。（结果：车子已在门口） Someone has broken the window.有人把窗户打破了。（结果：窗户仍破着） B. 表示过去已经开始，持续到现在的动作或状态，可以和表示从过去某一时刻延续到现在（包括“现在”在内）的一段时间的状语连用,如for+时间段、since+过去的时间点、疑问词how long等。例如： My uncle has worked at this factory for five years. 我叔叔在这个工厂工作已经五年了。 Mr. Black has lived in China since 2002. 自从2002年Mr. Black 一直住在中国。 How long have you been here? 你来这里多久了？ 4. 在下列情形下用现在完成时 (1)九词语 ①already已经肯定句中或句尾 e.g.: I have already found my pen. = I have found my pen already. ②yet已经否定句和疑问句句尾 e.g.：I have not finished the work yet. Have you bought a computer yet? ③ever曾经句中 e.g.：Have you ever seen pandas? ④never从不句中 e.g.：I have never been to Beijing. ⑤just刚刚句中 e.g.：I have just done my work. ⑥before以前句尾 e.g.：I have never been there before. ⑦so far到目前为止 e.g.：So far he has learnt 200 words. ⑧how long多久 e.g.：How long have you lived here? ⑨how many times多少次 e.g.：How many times has he been to Beijing? (3)三词组 1.have
Unit1 Americans believe no one stands still. If you are not moving ahead, you are falling behind. This attitude results in a nation of people committed to researching, experimenting and exploring. Time is one of the two elements that Americans save carefully, the other being labor. "We are slaves to nothing but the clock,” it has been said. Time is treated as if it were something almost real. We budget it, save it, waste it, steal it, kill it, cut it, account for it; we also charge for it. It is a precious resource. Many people have a rather acute sense of the shortness of each lifetime. Once the sands have run out of a person’s hourglass, they cannot be replaced. We want every minute to count. A foreigner’s first impression of the U.S. is li kely to be that everyone is in a rush -- often under pressure. City people always appear to be hurrying to get where they are going, restlessly seeking attention in a store, or elbowing others as they try to complete their shopping. Racing through daytime meals is part of the pace
spend的主语必须是人，常用于以下结构： (1)sb. spend time ／money on sth. 在……上花费时间(金钱)。 (2) sb.spend time ／ money (in) doing sth.花费时间(金钱)做某事。 例：I spent fifty yuan on the coat. = I spent fifty yuan (in) buying the coat. 我花50元买了这件大衣。 He spent three days on the work. = He spend three days (in) doing the work. 我干这项工作用了3天。 (3). spend money for sth. 花钱买 例如： His money was spent for books. 他的钱用来买书了。 cost的主语是物或某种活动，还可以表示"值"，常见用法如下： (1)sth. costs (sb.) ＋金钱,某物花了(某人)多少钱。 例：A new computer costs a lot of money. 买一台新电脑要花一大笔钱。 (2) (doing) sth. costs (sb.) ＋时间,某物(做某事)花了(某人)多少时间。 例：Remembering these new words cost him a lot of time. 他花了大量时间才记住了这些单词。 注意：cost的过去式及过去分词都是cost,并且不能用于被动句。 take后面常跟双宾语，常见用法有以下几种： (1) It takes sb. ＋时间＋to do sth. 做某事花了某人多少时间。 例：It took them three years to build this road. 他们用了三年时间修完了这条路。 (2)doing sth. takes sb. ＋时间,做某事花了某人多少时间。 例：Repairing this car took him the whole afternoon. 他花了一下午修车。 pay的基本用法是： (1) pay (sb.) money for sth. 付钱(给某人)买……。 例：I have to pay them 20 pounds for this room each month. 我每个月要付20英磅的房租。 (2)pay for sth. 付……的钱。 例：I have to pay for the book lost. 我不得不赔丢失的书款。 (3)pay for sb.替某人付钱。 例：Don‘t worry!I'll pay for you. 别担心，我会给你付钱的。 (4)pay sb.付钱给某人。 例: They pay us every month.他们每月给我们报酬。 (5)pay money back 还钱。(6)pay off one's money还清钱。 例：May I borrow 12 yuan from you? I'll pay it back next week. 你能借给我12块钱吗？下周还你。
Lead in 一般过去时导入：一般过去时的概念 一般过去时表示过去某个时间发生的动作或存在的状态。 I lost my pen.(过去时) I have lost my pen.（现在完成时） 过去时一般表示过去所发生的动作或存在的状态。“我把笔丢了”，说话人只是想告诉对方在过去的某一个时间里他的笔丢了，仅此而已。（仅仅是在陈诉过去的一个事实，与现在没有关系） New lesson 一．现在完成时的构成： 助动词have/has(not) +动词过去分词 She has turned on the lights. 肯定式：have/ has+过去分词 否定式：haven’t/hasn’t+过去分词 疑问式：把have/has 提到主语前面 肯定回答：Yes,…have/has 否定回答：No,…..haven’t/hasn’t 二．用法 1.表示过去发生的动作对现在造成的影响或结果. 例如:She has gone. 她走了. She went in the past.(She is not here
now.) I have just cleaned my hands. 我刚洗过手。（“洗手”是发生在过去的动作，对现在造成的结果是“手干净了”） I have closed the door. (The door is close now.) She has turned on the lights. (The lights are on now.) He has written his name on the blackboard. (The name is on the blackboard now.) Mother has cooked the dinner. (We can have dinner now.) You have seen the film. （You know what the film is about.) We have cleaned the classroom. (The classroom is clean now.) 2. 表示动作发生在过去，并且一直延续到现在，甚至还可能继续延续下去。这时常和since所引导的短语或从句或for引导的短语连用(for有时可以省去)。以及so far, by now, these days, in the last/past … years/days…等连用。 I have lived here for over ten years. （表示他现在还在这里居住，并且还有可能继续住下去）比较：I lived here ten years ago.(仅仅说明了他十年前在这里记住过的事实,不代表现在他还住在这里) He has studied here since 2006. 都用How long 提问，例： We have learned English for three years. We have learned English since three years ago.
新视野三版读写B2U4Text A College sweethearts 1I smile at my two lovely daughters and they seem so much more mature than we,their parents,when we were college sweethearts.Linda,who's21,had a boyfriend in her freshman year she thought she would marry,but they're not together anymore.Melissa,who's19,hasn't had a steady boyfriend yet.My daughters wonder when they will meet"The One",their great love.They think their father and I had a classic fairy-tale romance heading for marriage from the outset.Perhaps,they're right but it didn't seem so at the time.In a way, love just happens when you least expect it.Who would have thought that Butch and I would end up getting married to each other?He became my boyfriend because of my shallow agenda:I wanted a cute boyfriend! 2We met through my college roommate at the university cafeteria.That fateful night,I was merely curious,but for him I think it was love at first sight."You have beautiful eyes",he said as he gazed at my face.He kept staring at me all night long.I really wasn't that interested for two reasons.First,he looked like he was a really wild boy,maybe even dangerous.Second,although he was very cute,he seemed a little weird. 3Riding on his bicycle,he'd ride past my dorm as if"by accident"and pretend to be surprised to see me.I liked the attention but was cautious about his wild,dynamic personality.He had a charming way with words which would charm any girl.Fear came over me when I started to fall in love.His exciting"bad boy image"was just too tempting to resist.What was it that attracted me?I always had an excellent reputation.My concentration was solely on my studies to get superior grades.But for what?College is supposed to be a time of great learning and also some fun.I had nearly achieved a great education,and graduation was just one semester away.But I hadn't had any fun;my life was stale with no component of fun!I needed a boyfriend.Not just any boyfriend.He had to be cute.My goal that semester became: Be ambitious and grab the cutest boyfriend I can find. 4I worried what he'd think of me.True,we lived in a time when a dramatic shift in sexual attitudes was taking place,but I was a traditional girl who wasn't ready for the new ways that seemed common on campus.Butch looked superb!I was not immune to his personality,but I was scared.The night when he announced to the world that I was his girlfriend,I went along
英语中“花费”的四种用法王朝红的工作室英语花费四种用法 spend的主语通常是人，往往用于以下句型： 1. (sb) spend some money/some time on sth。 2. (sb)spend some money/some time(in)doing sth。 例如： I spent fifty yuan on the coat。 = I spent fifty yuan (in) buying the coat. 我花50元买了这件大衣。 He spent three days on the work. = He spend three days (in) doing the work. 我干这项工作用了3天。 3.spend money for sth. 花钱买……。 例如：His money was spent for books. 他的钱用来买书了。 take常用于“占用、花费”时间，后面常跟双宾语，其主语通常为形式主语“it”或物。句式是： 1. It takes/took sb.some time to do sth 例如：It will take me two days to do the work. 这项工作花了2天时间。 2. Doing sth./Sth.takes sb.some time. 例如： The work will take me two days。这项工作花了2天时间。
Repairing this car took him the whole afternoon. 他花了一下午修车。 It took me three years to draw the beautiful horses。 =Drawing the beautiful horses took me three years。 画这些漂亮的马花费了我3年时间。 pay为“付款、赔偿”之意，主语通常是人，句型 1. sb. pays some money for sth 例如： I paid fifty yuan for the coat。我花50元买了这件大衣。 2. pay (sb。) money for sth. 付钱(给某人)买……。 例如：I have to pay them 20 pounds for this room each month. 我每个月要付20英磅的房租。 3. pay money back 还钱。 例如：May I borrow 12 yuan from you? I'll pay it back next week. 你能借给我12块钱吗?下周还你。 4. pay off one's money 还清钱。 cost的主语是物或某种活动，还可以表示“值”。句型 1. sth. costs (sb。) +money, 某物花了(某人)多少钱。
LESSON EIGHT 四种完成时态 主系表 现在：You are rich. 过去：You were rich. 将来：You will be rich. 过去将来：You would be rich. There be 现在：There is a book on the desk . 过去：There was a book on the desk. 将来：There will be a book on the desk. 过去将来：There would be a book on the desk.主谓宾状 现在：You study English in the school. 过去时：You studied English in the school. 将来时: You will study English in the school. You are going to study English. You are to study English. are about to study English would study English in the scho You were going to study English. You were to study English. You were about to study English. You are studying English. You were studying English. You will be studying English. You woud be studying English.
Unit 1 1学习外语是我一生中最艰苦也是最有意义的经历之一。虽然时常遭遇挫折，但却非常有价值。 2我学外语的经历始于初中的第一堂英语课。老师很慈祥耐心，时常表扬学生。由于这种积极的教学方法，我踊跃回答各种问题，从不怕答错。两年中，我的成绩一直名列前茅。 3到了高中后，我渴望继续学习英语。然而，高中时的经历与以前大不相同。以前，老师对所有的学生都很耐心，而新老师则总是惩罚答错的学生。每当有谁回答错了，她就会用长教鞭指着我们，上下挥舞大喊：“错！错！错！”没有多久，我便不再渴望回答问题了。我不仅失去了回答问题的乐趣，而且根本就不想再用英语说半个字。 4好在这种情况没持续多久。到了大学，我了解到所有学生必须上英语课。与高中老师不。大学英语老师非常耐心和蔼，而且从来不带教鞭！不过情况却远不尽如人意。由于班大，每堂课能轮到我回答的问题寥寥无几。上了几周课后，我还发现许多同学的英语说得比我要好得多。我开始产生一种畏惧感。虽然原因与高中时不同，但我却又一次不敢开口了。看来我的英语水平要永远停步不前了。 5直到几年后我有机会参加远程英语课程，情况才有所改善。这种课程的媒介是一台电脑、一条电话线和一个调制解调器。我很快配齐了必要的设备并跟一个朋友学会了电脑操作技术，于是我每周用5到7天在网上的虚拟课堂里学习英语。 6网上学习并不比普通的课堂学习容易。它需要花许多的时间，需要学习者专心自律，以跟上课程进度。我尽力达到课程的最低要求，并按时完成作业。 7我随时随地都在学习。不管去哪里，我都随身携带一本袖珍字典和笔记本，笔记本上记着我遇到的生词。我学习中出过许多错，有时是令人尴尬的错误。有时我会因挫折而哭泣，有时甚至想放弃。但我从未因别的同学英语说得比我快而感到畏惧，因为在电脑屏幕上作出回答之前，我可以根据自己的需要花时间去琢磨自己的想法。突然有一天我发现自己什么都懂了，更重要的是，我说起英语来灵活自如。尽管我还是常常出错，还有很多东西要学，但我已尝到了刻苦学习的甜头。 8学习外语对我来说是非常艰辛的经历，但它又无比珍贵。它不仅使我懂得了艰苦努力的意义，而且让我了解了不同的文化，让我以一种全新的思维去看待事物。学习一门外语最令人兴奋的收获是我能与更多的人交流。与人交谈是我最喜欢的一项活动，新的语言使我能与陌生人交往，参与他们的谈话，并建立新的难以忘怀的友谊。由于我已能说英语，别人讲英语时我不再茫然不解了。我能够参与其中，并结交朋友。我能与人交流，并能够弥合我所说的语言和所处的文化与他们的语言和文化之间的鸿沟。 III. 1. rewarding 2. communicate 3. access 4. embarrassing 5. positive 6. commitment 7. virtual 8. benefits 9. minimum 10. opportunities IV. 1. up 2. into 3. from 4. with 5. to 6. up 7. of 8. in 9. for 10.with V. 1.G 2.B 3.E 4.I 5.H 6.K 7.M 8.O 9.F 10.C Sentence Structure VI. 1. Universities in the east are better equipped, while those in the west are relatively poor. 2. Allan Clark kept talking the price up, while Wilkinson kept knocking it down. 3. The husband spent all his money drinking, while his wife saved all hers for the family. 4. Some guests spoke pleasantly and behaved politely, while others wee insulting and impolite. 5. Outwardly Sara was friendly towards all those concerned, while inwardly she was angry. VII. 1. Not only did Mr. Smith learn the Chinese language, but he also bridged the gap between his culture and ours. 2. Not only did we learn the technology through the online course, but we also learned to communicate with friends in English. 3. Not only did we lose all our money, but we also came close to losing our lives.
“四个花费”讲解及对应中考练习 spend，cost，take, pay spend，cost，take和pay的区别是历年考试的必考内容之一，虽然它们都可以表示"花费"，但用法却不尽相同，讲解如下： spend的主语必须是人，常用于以下结构： (1) spend time ／money on sth. 在……上花费时间(金钱)。 例：I spent two hours on this maths problem. 这道数学题花了我两个小时。 (2) spend time ／money (in) doing sth. 花费时间(金钱)做某事。 例：They spent two years (in) building this bridge. 造这座桥花了他们两年时间。 (3)spend money for sth. 花钱买……。 例：His money was spent for books. 他的钱用来买书了。 cost的主语是物或某种活动，还可以表示"值"，常见用法如下： (1)sth. costs (sb.) ＋金钱,某物花了(某人)多少钱。 例：A new computer costs a lot of money. 买一台新电脑要花一大笔钱。 (2) (doing) sth. costs (sb.) ＋时间,某物(做某事)花了(某人)多少时间。 例：Remembering these new words cost him a lot of time. 他花了大量时间才记住了这些单词。 注意：cost的过去式及过去分词都是cost,并且不能用于被动句。 take后面常跟双宾语，常见用法有以下几种： (1) It takes sb. ＋时间＋to do sth. 做某事花了某人多少时间。 例：It took them three years to build this road. 他们用了三年时间修完了这条路。 (2)doing sth. takes sb. ＋时间,做某事花了某人多少时间。 例：Repairing this car took him the whole afternoon. 他花了一下午修车。 pay的基本用法是： (1) pay (sb.) money for sth. 付钱(给某人)买……。 例：I have to pay them 20 pounds for this room each month. 我每个月要付20英磅的房租。 (2)pay for sth. 付……的钱。 例：I have to pay for the book lost. 我不得不赔丢失的书款。 (3)pay for sb. 替某人付钱。 例：Don‘t worry!I'll pay for you. 别担心，我会给你付钱的。 (4)pay sb. 付钱给某人。 例: They pay us every month.他们每月给我们报酬。 (5)pay money back 还钱。 例：May I borrow 12 yuan from you? I'll pay it back next week. 你能借给我12块钱吗？下周还你。 (6)pay off one's money还清钱。 【真题对应练习】 1.（广州某校2015期中）--- How much does your new bike ___________ ?
新大学日语简明教程课文翻译 第21课 一、我的留学生活 我从去年12月开始学习日语。已经3个月了。每天大约学30个新单词。每天学15个左右的新汉字，但总记不住。假名已经基本记住了。 简单的会话还可以，但较难的还说不了。还不能用日语发表自己的意见。既不能很好地回答老师的提问，也看不懂日语的文章。短小、简单的信写得了，但长的信写不了。 来日本不久就迎来了新年。新年时，日本的少女们穿着美丽的和服，看上去就像新娘。非常冷的时候，还是有女孩子穿着裙子和袜子走在大街上。 我在日本的第一个新年过得很愉快，因此很开心。 现在学习忙，没什么时间玩，但周末常常运动，或骑车去公园玩。有时也邀朋友一起去。虽然我有国际驾照，但没钱，买不起车。没办法，需要的时候就向朋友借车。有几个朋友愿意借车给我。 二、一个房间变成三个 从前一直认为睡在褥子上的是日本人，美国人都睡床铺，可是听说近来纽约等大都市的年轻人不睡床铺，而是睡在褥子上，是不是突然讨厌起床铺了？ 日本人自古以来就睡在褥子上，那自有它的原因。人们都说日本人的房子小，从前，很少有人在自己的房间，一家人住在一个小房间里是常有的是，今天仍然有人过着这样的生活。 在仅有的一个房间哩，如果要摆下全家人的床铺，就不能在那里吃饭了。这一点，褥子很方便。早晨，不需要褥子的时候，可以收起来。在没有了褥子的房间放上桌子，当作饭厅吃早饭。来客人的话，就在那里喝茶；孩子放学回到家里，那房间就成了书房。而后，傍晚又成为饭厅。然后收起桌子，铺上褥子，又成为了全家人睡觉的地方。 如果是床铺的话，除了睡觉的房间，还需要吃饭的房间和书房等，但如果使用褥子，一个房间就可以有各种用途。 据说从前，在纽约等大都市的大学学习的学生也租得起很大的房间。但现在房租太贵，租不起了。只能住更便宜、更小的房间。因此，似乎开始使用睡觉时作床，白天折小能成为椅子的、方便的褥子。
新视野大学英语第一册Unit 1课文翻译 学习外语是我一生中最艰苦也是最有意义的经历之一。 虽然时常遭遇挫折，但却非常有价值。 我学外语的经历始于初中的第一堂英语课。 老师很慈祥耐心，时常表扬学生。 由于这种积极的教学方法，我踊跃回答各种问题，从不怕答错。 两年中，我的成绩一直名列前茅。 到了高中后，我渴望继续学习英语。然而，高中时的经历与以前大不相同。 以前，老师对所有的学生都很耐心，而新老师则总是惩罚答错的学生。 每当有谁回答错了，她就会用长教鞭指着我们，上下挥舞大喊：“错！错！错！” 没有多久，我便不再渴望回答问题了。 我不仅失去了回答问题的乐趣，而且根本就不想再用英语说半个字。 好在这种情况没持续多久。 到了大学，我了解到所有学生必须上英语课。 与高中老师不同，大学英语老师非常耐心和蔼，而且从来不带教鞭！ 不过情况却远不尽如人意。 由于班大，每堂课能轮到我回答的问题寥寥无几。 上了几周课后，我还发现许多同学的英语说得比我要好得多。 我开始产生一种畏惧感。 虽然原因与高中时不同，但我却又一次不敢开口了。 看来我的英语水平要永远停步不前了。 直到几年后我有机会参加远程英语课程，情况才有所改善。 这种课程的媒介是一台电脑、一条电话线和一个调制解调器。 我很快配齐了必要的设备并跟一个朋友学会了电脑操作技术，于是我每周用5到7天在网上的虚拟课堂里学习英语。 网上学习并不比普通的课堂学习容易。 它需要花许多的时间，需要学习者专心自律，以跟上课程进度。 我尽力达到课程的最低要求，并按时完成作业。 我随时随地都在学习。 不管去哪里，我都随身携带一本袖珍字典和笔记本，笔记本上记着我遇到的生词。 我学习中出过许多错，有时是令人尴尬的错误。 有时我会因挫折而哭泣，有时甚至想放弃。 但我从未因别的同学英语说得比我快而感到畏惧，因为在电脑屏幕上作出回答之前，我可以根据自己的需要花时间去琢磨自己的想法。 突然有一天我发现自己什么都懂了，更重要的是，我说起英语来灵活自如。 尽管我还是常常出错，还有很多东西要学，但我已尝到了刻苦学习的甜头。 学习外语对我来说是非常艰辛的经历，但它又无比珍贵。 它不仅使我懂得了艰苦努力的意义，而且让我了解了不同的文化，让我以一种全新的思维去看待事物。 学习一门外语最令人兴奋的收获是我能与更多的人交流。 与人交谈是我最喜欢的一项活动，新的语言使我能与陌生人交往，参与他们的谈话，并建立新的难以忘怀的友谊。 由于我已能说英语，别人讲英语时我不再茫然不解了。 我能够参与其中，并结交朋友。
四种花费和四种提供的 用法 公司内部编号：（GOOD-TMMT-MMUT-UUPTY-UUYY-DTTI-
英语中“花费”的四种用法王朝红的工作室英语花费四种用法 spend的主语通常是人，往往用于以下句型： 1. (sb) spend some money/some time on sth。 2. (sb)spend some money/some time(in)doing sth。 例如： I spent fifty yuan on the coat。 = I spent fifty yuan (in) buying the coat. 我花50元买了这件大衣。 He spent three days on the work. = He spend three days (in) doing the work. 我干这项工作用了3天。 3.spend money for sth. 花钱买……。 例如：His money was spent for books. 他的钱用来买书了。 take常用于“占用、花费”时间，后面常跟双宾语，其主语通常为形式主语“it”或物。句式是： 1. It takes/took sb.some time to do sth
例如：It will take me two days to do the work. 这项工作花 了2天时间。 2. Doing sth./Sth.takes sb.some time. 例如： The work will take me two days。这项工作花了2天时间。 Repairing this car took him the whole afternoon. 他花了一下午修车。 It took me three years to draw the beautiful horses。 =Drawing the beautiful horses took me three years。 画这些漂亮的马花费了我3年时间。 pay为“付款、赔偿”之意，主语通常是人，句型 1. sb. pays some money for sth 例如： I paid fifty yuan for the coat。我花50元买了这件大衣。 2. pay (sb。) money for sth. 付钱(给某人)买……。 例如：I have to pay them 20 pounds for this room each month.我每个月要付20英磅的房租。
习惯与礼仪 我是个漫画家，对旁人细微的动作、不起眼的举止等抱有好奇。所以，我在国外只要做错一点什么，立刻会比旁人更为敏锐地感觉到那个国家的人们对此作出的反应。 譬如我多次看到过，欧美人和中国人见到我们日本人吸溜吸溜地出声喝汤而面露厌恶之色。过去，日本人坐在塌塌米上，在一张低矮的食案上用餐，餐具离嘴较远。所以，养成了把碗端至嘴边吸食的习惯。喝羹匙里的东西也象吸似的，声声作响。这并非哪一方文化高或低，只是各国的习惯、礼仪不同而已。 日本人坐在椅子上围桌用餐是1960年之后的事情。当时，还没有礼仪规矩，甚至有人盘着腿吃饭。外国人看见此景大概会一脸厌恶吧。 韩国女性就座时，单腿翘起。我认为这种姿势很美，但习惯于双膝跪坐的日本女性大概不以为然，而韩国女性恐怕也不认为跪坐为好。 日本等多数亚洲国家，常有人习惯在路上蹲着。欧美人会联想起狗排便的姿势而一脸厌恶。 日本人常常把手放在小孩的头上说“好可爱啊！”，而大部分外国人会不愿意。 如果向回教国家的人们劝食猪肉和酒，或用左手握手、递东西，会不受欢迎的。当然，饭菜也用右手抓着吃。只有从公用大盘往自己的小盘里分食用的公勺是用左手拿。一旦搞错，用黏糊糊的右手去拿，
会遭人厌恶。 在欧美，对不受欢迎的客人不说“请脱下外套”，所以电视剧中的侦探哥隆波总是穿着外套。访问日本家庭时，要在门厅外脱掉外套后进屋。穿到屋里会不受欢迎的。 这些习惯只要了解就不会出问题，如果因为不知道而遭厌恶、憎恨，实在心里难受。 过去，我曾用色彩图画和简短的文字画了一本《关键时刻的礼仪》（新潮文库）。如今越发希望用各国语言翻译这本书。以便能对在日本的外国人有所帮助。同时希望有朝一日以漫画的形式画一本“世界各国的习惯与礼仪”。 练习答案 ５、 （１）止める並んでいる見ているなる着色した （２）拾った入っていた行ったしまった始まっていた
新视野大学英语第三版第二册读写课文翻译 Unit 1 Text A 一堂难忘的英语课 1 如果我是唯一一个还在纠正小孩英语的家长，那么我儿子也许是对的。对他而言，我是一个乏味的怪物：一个他不得不听其教诲的父亲，一个还沉湎于语法规则的人，对此我儿子似乎颇为反感。 2 我觉得我是在最近偶遇我以前的一位学生时，才开始对这个问题认真起来的。这个学生刚从欧洲旅游回来。我满怀着诚挚期待问她：“欧洲之行如何？” 3 她点了三四下头，绞尽脑汁，苦苦寻找恰当的词语，然后惊呼：“真是，哇！” 4 没了。所有希腊文明和罗马建筑的辉煌居然囊括于一个浓缩的、不完整的语句之中！我的学生以“哇！”来表示她的惊叹，我只能以摇头表达比之更强烈的忧虑。 5 关于正确使用英语能力下降的问题，有许多不同的故事。学生的确本应该能够区分诸如their/there/they're之间的不同，或区别complimentary 跟complementary之间显而易见的差异。由于这些知识缺陷，他们承受着大部分不该承受的批评和指责，因为舆论认为他们应该学得更好。 6 学生并不笨，他们只是被周围所看到和听到的语言误导了。举例来说，杂货店的指示牌会把他们引向stationary（静止处），虽然便笺本、相册、和笔记本等真正的stationery（文具用品）并没有被钉在那儿。朋友和亲人常宣称They've just ate。实际上，他们应该说They've just eaten。因此，批评学生不合乎情理。 7 对这种缺乏语言功底而引起的负面指责应归咎于我们的学校。学校应对英语熟练程度制定出更高的标准。可相反，学校只教零星的语法，高级词汇更是少之又少。还有就是，学校的年轻教师显然缺乏这些重要的语言结构方面的知识，因为他们过去也没接触过。学校有责任教会年轻人进行有效的语言沟通，可他们并没把语言的基本框架——准确的语法和恰当的词汇——充分地传授给学生。