商品销售合同范本(英文)

格式：doc
大小：20.50 KB
文档页数：2

下载文档原格式

关于英文销售合同范本6篇

关于英文销售合同范本6篇篇1Sales ContractThis Sales Contract (“Contract”) is made and entered into by and between Seller and Buyer on this day___________(date).1. Sale of Goods:Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods:- Description of goods- Quantity- Price2. Payment Terms:Buyer shall pay Seller the total amount of $_____________ for the goods purchased. Payment shall be made in full within ______ days of the date of this Contract. Payment shall be made in the form of [cash, check, wire transfer, etc.].3. Delivery:Seller shall deliver the goods to Buyer at the following address:- Delivery addressDelivery shall be made on or before ____________(date). Time is of the essence in this Contract.4. Inspection:Buyer shall have the right to inspect the goods upon delivery. Buyer must notify Seller of any defects or nonconformities within _______ days of delivery.5. Warranties:Seller warrants that the goods:- Are free from defects in material and workmanship- Conform to the specifications set forth in this Contract- Are fit for the particular purpose for which they are intendedSeller’s liability under this warranty shall be limited to repairing or replacing the defective goods.6. Indemnification:Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, liabilities, and expenses arising out of or related to the goods sold under this Contract, including but not limited to claims of infringement of intellectual property rights.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of the State of___________.8. Entire Agreement:This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes all prior agreements, representations, and understandings.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller____________________________Buyer____________________________This document reflects the entire agreement between Seller and Buyer for the sale of goods in question. It is recommended that both parties review this Contract carefully and seek legal advice if necessary before signing.篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] by and between [Seller], located at [Address] (“Seller”) and [Buyer], located at [Address] (“Buyer”).1. Sale of GoodsSeller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the “Goods”): [Description of Goods] in the quantity and price set forth in Exhibit A attached hereto.2. DeliverySeller shall deliver the Goods to Buyer at the location specified by Buyer on [Delivery Date]. Buyer shall be responsible for all shipping costs.3. PaymentBuyer shall pay Seller the total purchase price for the Goods in the amount of [Total Amount], payable as follows: [Payment Terms]. Payment shall be made in [Currency] by [Payment Method].4. InspectionBuyer shall have [Number] days from the date of delivery to inspect the Goods. If Buyer finds any defects or nonconformities, Buyer shall notify Seller in writing within [Number] days of the delivery date. Seller shall have the option to refund Buyer or replace the defective Goods.5. Representations and WarrantiesSeller represents and warrants that the Goods are free from defects in materials and workmanship and are fit for the purpose intended.6. Limitation of LiabilityIn no event shall Seller be liable to Buyer for any indirect, special, incidental, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between Seller and Buyer and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _____________________________Buyer: ______________________________Exhibit A: Description of Goods[Insert Description of Goods][Signatures]This Sales Contract is hereby executed by the parties as of the date first above written.Seller: _____________________________Buyer: ______________________________I. General Terms and ConditionsThis Sales Contract (the "Agreement") is entered into by and between [SELLER NAME] ("Seller") and [BUYER NAME] ("Buyer") on [SIGNING DATE] (the "Effective Date"). Seller and Buyer agree as follows:1. Sale, Quantity, and Description of Goods. Seller agrees to sell and Buyer agrees to purchase the goods (the "Goods") in the quantities and descriptions set forth in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be as set forth in Exhibit A and shall be paid to Seller in accordance with the payment terms set forth in Exhibit B.3. Delivery of Goods. The Goods shall be delivered by Seller to Buyer at the location specified by Buyer on or before the delivery date set forth in Exhibit A.4. Title and Risk of Loss. Title to and risk of loss for the Goods shall pass to Buyer upon delivery of the Goods by Seller to the carrier at the point of shipment.5. Inspection and Acceptance. Buyer shall have [NUMBER] days from the date of delivery of the Goods to inspect the Goods and to notify Seller of any nonconformities. Buyer's failure to notify Seller of any nonconformities within such period shall constitute acceptance of the Goods.6. Warranties. Seller hereby warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller's liability under this warranty shall be limited to replacement of the nonconforming Goods.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any special, consequential, or incidental damages arising out of or relating to this Agreement.8. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of [STATE].9. Entire Agreement. This Agreement constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]Exhibit A: Description of Goods[DESCRIPTION OF GOODS]Exhibit B: Payment Terms[PAYMENT TERMS]II. Specific Provisions1. Termination. This Agreement may be terminated by either party upon [NUMBER] days written notice for any reason.2. Force Majeure. Neither party shall be liable for any failure or delay in performing its obligations under this Agreement to the extent such failure or delay is caused by circumstances beyond its reasonable control.3. Confidentiality. Seller and Buyer shall keep confidential all information received from the other party in connection with this Agreement and shall not disclose such information to any third party without the other party's prior written consent.4. Assignment. Neither party may assign its rights or obligations under this Agreement without the other party's prior written consent.5. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original and all of which together shall constitute one and the same instrument.6. Modification. This Agreement may be modified only by a written instrument signed by both parties.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the Effective Date.SELLER: BUYER:_________________________ _________________________[SELLER NAME] [BUYER NAME]篇3Sales ContractThis sales contract (the "Contract") is made and entered into on [date], by and between [Seller name], having its principal place of business at [Seller address] and [Buyer name], having its principal place of business at [Buyer address].1. Goods Sold: The Seller agrees to sell and deliver to the Buyer the following goods (the "Goods"):- [Description of goods]- Quantity: [Number of units]- Price: [Price per unit]2. Payment Terms: The Buyer agrees to pay the Seller the total amount of [total amount] for the Goods. Payment shall be made in [currency] within [number] days of the delivery of the Goods.3. Delivery: The Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery address]. Delivery shall be made on or before [delivery date].4. Inspection: The Buyer shall have the right to inspect the Goods upon delivery. If the Goods are not in conformity with the Contract, the Buyer may reject the Goods and notify the Seller within [number] days.5. Warranty: The Seller warrants that the Goods are free from defects in materials and workmanship. If any defects are found within [warranty period], the Seller shall replace the Goods at no additional cost to the Buyer.6. Governing Law: This Contract shall be governed by the laws of [State/Country]. Any disputes arising out of or in connection with this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration association].7. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller Signature] [Buyer Signature]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller], with a business address at [Address], and [Buyer], with a business address at [Address].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods]2. Price: The total purchase price for the goods shall be [Price]. The price is inclusive of all taxes, duties, and other charges.3. Delivery: The Seller shall deliver the goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear any additional costs for expedited delivery.4. Payment: The Buyer shall pay the total purchase price in full upon delivery of the goods. Payment shall be made in [Currency] by [Payment Method].5. Warranties: The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period]. The Seller shall repair or replace any defective goods at no additional cost to the Buyer.6. Indemnification: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from the use or sale of the goods.7. Governing Law: This Contract shall be governed by the laws of [Jurisdiction]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [Arbitration Location].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of goods and supersedes all prior agreements, written or oral.IN WITNESS WHEREOF, the parties have executed this Contract on the date first above written.Seller: ________________________Buyer: ________________________Date: ________________________This Sales Contract is a legally binding agreement between the Seller and the Buyer for the sale of goods. Both parties should carefully review and understand the terms and conditions before signing.篇5Sales contract1. Parties to the contract:This Sales Contract (hereinafter referred to as "Contract") is entered into between:Seller: [Name of the Seller]Registered address: [Address of the Seller]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]Buyer: [Name of the Buyer]Registered address: [Address of the Buyer]Contact person: [Name of the Contact person]Telephone: [Contact number]Email: [Email address]2. Product details:The Seller agrees to sell and the Buyer agrees to purchase the following products:Product name: [Name of the product]Description: [Brief description of the product]Quantity: [Quantity of the product]Unit price: [Price per unit]Total price: [Total price of the products]3. Payment terms:The Buyer agrees to pay the total amount of the products to the Seller in the following manner:- 30% of the total amount as a deposit upon signing of the contract- 70% of the total amount upon delivery of the productsPayment method: [Payment method]Currency: [Currency]Payment deadline: [Deadline for payment]4. Delivery terms:The Seller agrees to deliver the products to the Buyer at the following address:Delivery address: [Address of delivery]Delivery method: [Method of delivery]Delivery time: [Time of delivery]5. Quality assurance:The Seller guarantees that the products supplied under this Contract meet the required quality standards. In case of any defects or non-conformities, the Seller agrees to replace or refund the affected products.6. Governing law:This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute resolution:Any disputes arising out of or in connection with this Contract shall be settled amicably through negotiations between the Parties. If no resolution can be reached, the Parties agree tosubmit the dispute to arbitration in accordance with the rules of [Arbitration Institution].8. Miscellaneous:This Contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings, written or oral, relating to the subject matter hereof.In witness whereof, the Parties have executed this Contract as of the date first above written.Seller:Signature: _____________________Printed name: _________________Date: _______________________Buyer:Signature: _____________________Printed name: _________________Date: _______________________篇6Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Contract Date], by and between [Seller], a company incorporated under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer], a company incorporated under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Price: The Purchase Price shall be as set forth in Exhibit A, and shall be paid by Buyer to Seller in the manner set forth in Exhibit A.3. Delivery: Seller shall deliver the Goods to Buyer at the location set forth in Exhibit A. Delivery shall be made on or before the delivery date set forth in Exhibit A.4. Acceptance: Buyer shall inspect the Goods promptly upon delivery. If Buyer finds any defects in the Goods, Buyer shall notify Seller within [number] days of delivery and provide Seller with a written description of the defects. Upon receiving suchnotice, Seller shall take reasonable steps to correct the defects in the Goods.5. Title and Risk of Loss: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to Buyer.6. Warranty: Seller warrants that the Goods will conform to the specifications set forth in Exhibit A. Seller further warrants that the Goods will be free from defects in materials and workmanship for a period of [number] months from the date of delivery.7. Limitation of Liability: In no event shall Seller be liable to Buyer for any indirect, special, incidental, consequential or punitive damages arising out of or in connection with this Contract, whether or not Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].9. Entire Agreement: This Contract represents the entire agreement between the parties with respect to the sale of the Goods, and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.[Seller]By: _______________________Name: _________________Title: _________________[Buyer]By: _______________________Name: _________________Title: _________________EXHIBIT AGoods: [Description of Goods]Purchase Price: [Price]Delivery Date: [Date]Delivery Location: [Address]。

销售合同英文范本5篇

销售合同英文范本5篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: (Please insert detailed product specifications, including product name, model number, quantity, quality, grade, size, color, packaging, etc.)2. Price and Payment:The price of the products shall be as per the list attached to this Contract. The total contract value is to be paid in (specify currency) according to the following schedule:* A deposit of XX% to be paid within XX days of signing this Contract.* The balance to be paid XX days prior to the date of shipment.All payments shall be made through the Buyer's bank account to the Seller's bank account. Details of banks and account numbers shall be communicated by both parties prior to signing this Contract.3. Delivery:The Seller shall deliver the products to the Buyer within XX days from the date of receiving the full payment. The products shall be delivered FOB (Free On Board) at the Seller's warehouse. The risk of loss or damage shall pass to the Buyer upon loading of the products onto the vessel.4. Quality Assurance:The Seller guarantees that all products are of good quality and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within XX days of receipt by the Buyer.5. Warranty:The Seller guarantees that all products are warranted against any defects in material or workmanship for a period of XX months from the date of sale to the Buyer. During this period, any defective products shall be repaired or replaced free of charge as per the Seller's choice.6. Terms and Conditions of Shipment:The terms and conditions of shipment shall be governed by International Trade terms and conditions including Incoterms 20XX. The Seller shall provide necessary shipping documents to facilitate smooth delivery of the products to the Buyer.7. Confidentiality:Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure. This confidentiality clause shall remain valid for a period of XX years from the date of signing this Contract.8. Force Majeure:Neither party shall be liable for any delay or failure in performance due to causes beyond their reasonable control, such as natural disasters, war, political events, etc. In such cases, the affected party shall immediately notify the other party of the situation and its possible consequences.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to (specify court/arbitration institution) for resolution.10. General Clauses:Buyer: _____________________ Date: _________ Signature:_________Seller: _____________________ Date: _________ Signature:_________This Sales Contract is hereby witnessed by:Witness: _____________________ Date: _________ Signature: _________篇2SALES CONTRACT销售合同This Sales Contract is made by and between [Buyer’s Name], having its principal place of business at [Buyer’s Address] (hereinafter referred to as “Buyer”), and [Seller’s Name], havi ng its principal place of business at [Seller’s Address] (hereinafter referred to as “Seller”), on the terms and conditions stipulated below:兹有[买方名称]（以下简称“买方”）与[卖方名称]（以下简称“卖方”）根据以下条款和条件签订此销售合同：Article 1: Product Description and Quantity第一条：产品描述与数量The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity:卖方同意出售，买方同意购买以下商品：[Product details, specifications, quantity, unit price, total value, etc.] （产品细节、规格、数量、单价、总价等）Article 2: Terms of Delivery第二条：交货条款The Seller shall deliver the goods within the time as stipulated in the contract. In case of failure on delivery on time, the Seller shall be held responsible for any loss caused to the Buyer. The risk of goods shall be borne by the Seller until they are delivered on board the vessel nominated by the Buyer. The Seller shall bear all expenses prior to delivery.卖方应在合同规定的时间内交货。

英文销售合同3篇

英文销售合同3篇s both in amount and quantity allowed at the sellers option.6 生产国和制造厂家country of origin and manufacturer7 包装：packing：8 唛头：shipping marks：9 装运期限：time of shipment：10 装运口岸：port of loading：11 目的口岸：port of destination：12 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance：to be effected by buyers for 110% of full invoice value covering _____ up to _____ only.13 付款条件：买方须于_____年_____月_____日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。

信用证议付有效期延至上列装运期后15天在中国到期，该信用证中必须注明允许分运及转运。

payment：by confirmed, irrevocable, transferable and divisible l/c to be available by sight draft to reach the sellers before ___/___/_____ and to remainvalid for ingotiation in china until 15 days after the aforesaid time of shipment. tje l/c must specify that transhipment and partial shipments are allowed.14 单据：documents：15 装运条件：terms of shipment：16 品质与数量、重量的异义与索赔：quality/quantity discrepancy and claim：17 人力不可抗拒因素：由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、防止和克服的其他事件导致不能或暂时不能全部或局部履行本协议，该方不负责任。

中英文销售合同5篇

中英文销售合同5篇篇1Sales ContractThis Sales Contract ("Contract") is made on [Insert Date], between [Seller’s Name], with its principal place of business located at [Seller’s Address], and [Buyer’s Name], with its principal place of business located at [Buyer’s Address]. Seller and Bu yer are collectively referred to as the “Parties”.1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1], quantity: [Quantity], unit price: [Price]- [Product 2], quantity: [Quantity], unit price: [Price]- [Product 3], quantity: [Quantity], unit price: [Price]2. Delivery: The Seller agrees to deliver the products as follows:- Delivery Location: [Delivery Address]- Delivery Date: [Date]- Delivery method: [Method]3. Payment: The Buyer agrees to pay the Seller for the products in the following manner:- Total Price: [Total Amount]- Payment Method: [Method]- Payment Terms: [Terms]4. Inspection and Acceptance: The Buyer shall inspect the products upon delivery and shall have [Number] days to notify the Seller of any defects. Failure to notify the Seller within the specified period shall constitute acceptance of the products.5. Warranty: The Seller warrants that the products will be free from defects in materials and workmanship for a period of [Warranty Period]. If any defects are discovered within the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Liability: The Seller shall not be liable for any damages resulting from the use or misuse of the products by the Buyer or any third party.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].8. Entire Agreement: This Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Date: ________________________[Attach signatures of both parties]This Sales Contract is hereby agreed to by the Parties as of the date first written above.[Seller’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________[Buyer’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________篇2Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], with its principal place of business located at [address], and [Buyer], with its principal place of business located at [address].1. Goods SoldSeller agrees to sell and Buyer agrees to purchase the following goods:- Description of goods- Quantity- Price2. DeliverySeller shall deliver the goods to Buyer at the following address: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for any shipping costs associated with the delivery of the goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the goods, which shall be [total amount]. Payment shall be made in the following manner:- [Payment method]- [Payment schedule]4. WarrantiesSeller warrants that the goods sold under this contract are free from defects in materials and workmanship and conform to the specifications provided by the Seller. Seller further warrants that it has good and marketable title to the goods. Any claims for breach of warranty must be made within [timeframe] after delivery of the goods.5. Inspection and AcceptanceBuyer shall have [number] days after delivery of the goods to inspect them. If Buyer finds any defects or nonconformities, Buyer must notify Seller in writing within [timeframe]. Seller shall have the opportunity to inspect the goods and make any necessary repairs or replacements.6. Limitation of LiabilitySeller's liability for any breach of this contract or for any claims arising out of the sale of the goods is limited to the purchase price of the goods. Seller shall not be liable for any consequential, incidental, or punitive damages.7. Governing LawThis contract shall be governed by the laws of[state/country]. Any disputes arising out of this contract shall be resolved through arbitration in [location].8. Entire AgreementThis Sales Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Sales Contract as of the date first written above.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇3Sales ContractThis Sales Contract (hereinafter referred to as "Contract") is entered into by and between Party A [Seller], located at [Address], and Party B [Buyer], located at [Address], on [Date].Article 1. Subject of the Contract1.1 Party A agrees to sell and Party B agrees to purchase the following goods:- Quantity: [Number]- Description: [Product Description]- Unit Price: [Price]- Total Price: [Price x Quantity]- Delivery Date: [Date]Article 2. Payment Terms2.1 The total price of the goods shall be paid by Party B to Party A in the following manner:- [Payment Method]- [Payment Schedule]- [Bank Details]Article 3. Delivery Terms3.1 Party A shall deliver the goods to the address specified by Party B on the agreed delivery date.3.2 Party A shall be responsible for the packaging and transportation of the goods to ensure they arrive in good condition.3.3 Party B shall inspect the goods upon delivery and notify Party A of any defects or discrepancies within [Number] days.Article 4. Title and Risk4.1 Title to the goods shall pass to Party B upon full payment of the total price.4.2 The risk of loss or damage to the goods shall pass to Party B upon delivery.Article 5. Warranties5.1 Party A warrants that the goods are free from defects in material and workmanship and conform to the description provided.5.2 Party A shall be responsible for repairing or replacing any defective goods at no additional cost to Party B.Article 6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].Article 7. Dispute Resolution7.1 Any disputes arising from this Contract shall be resolved through negotiation in good faith.7.2 If a resolution cannot be reached, the dispute shall be resolved through arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Party A: ________________________[Signature][Name][Title]Date:Party B: ________________________[Signature][Name][Title]Date:This Sales Contract is hereby accepted and agreed to by both Parties.以上是一份典型的中英文销售合同，包括订购商品、付款条款、交货条件、担保、适用法律等内容。

英文版销售合同范本7篇

英文版销售合同范本7篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale of the following goods. Both parties affirm their willingness to strictly observe the terms and conditions stipulated below.Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products: [Product Description, including product name, specifications, quantity, and unit price].Article 2: Contract PriceThe total contract price for the Products shall be [Total Contract Price] USD, which shall be paid in full according to Article 4.Article 3: Terms of DeliveryThe Products shall be delivered [Delivery Terms, such as FOB, CIF, EXW, etc.] [Port/Place of Delivery]. The delivery schedule is as follows: [Delivery Schedule].Article 4: Payment TermsBuyer shall make payment as follows: [Payment Details, including mode of payment (e.g., T/T, L/C, etc.), timing of payment, and any other relevant details].Article 5: Quality AssuranceSeller guarantees that the Products shall be in conformity with the contract specifications mentioned in Article 1. Any discrepancies shall be promptly rectified by Seller at its own expense.Article 6: Rights and Obligations of the Partiesa. Seller's obligations: Deliver the Products in good condition and in accordance with the contract specifications; provide necessary documents; and ensure timely delivery.b. Buyer's obligations: Make payment on time; accept the Products as per the contract; and provide necessary import clearance documents.Article 7: Force MajeureIf either party is prevented from fulfilling its contractual obligations due to force majeure events (e.g., natural disasters, war, riots), it shall promptly notify the other party in writing and endeavor to resume performance as soon as possible.Article 8: Disclaimers and Limitation of LiabilitySeller shall not be liable for any loss or damage arising from delay in delivery or any other cause beyond its reasonable control. Buyer shall bear all risks and costs arising from delay in taking delivery of the Products.Article 9: Warranty and After-Sales ServiceSeller shall provide a warranty period of [Warranty Period] upon delivery of the Products. During this period, Seller shallprovide necessary repairs or replacements free of charge for any defects in material or workmanship. After the warranty period, Seller shall continue to provide after-sales service at reasonable costs.Article 10: Settlement of DisputesAny disputes arising from or in connection with this contract shall be settled through friendly negotiation. If no settlement can be reached, the disputes shall be submitted to [Dispute Resolution Mechanism, such as arbitration or court].Article 11: General TermsThis contract is made in both English and [Other Language], with the English version prevailing in case of any discrepancies. This contract shall be binding on both parties and remains valid until fully performed by both parties or until terminated as per the terms of this contract.In witness whereof, the parties have signed this contract in duplicate, each party retaining one duplicate for their respective records.Signed, sealed and dated this ____ day of _______ at _______ (Place).For the Seller:For the Buyer:Authorized RepresentativeAuthorized RepresentativeName: ____________________ Name:____________________Title: ____________________ Title:____________________Signature: ____________________ Signature: ____________________Date: ____________________ Date:____________________"Note: This Sales Contract template is intended for general use and may need to be customized based on specific business requirements and applicable laws. It is advisable to have legal professionals review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], hereinafter referred to as "Seller" and [Buyer's Name], a legal entity registered in [Buyer's Country], hereinafter referred to as "Buyer".Article 1: Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [Describe the product, its specifications, quantity, and any other relevant details].Article 2: Price and Payment2.1 The total price of the products is [Price] USD.2.2 Payment terms: [Specify payment terms, e.g., T/T (telegraphic transfer), L/C (letter of credit), etc.]2.3 The Buyer shall make the payment within [Specify timeframe, e.g., 30 days of signing the contract].Article 3: Delivery3.1 The Seller shall deliver the products to the Buyer at the following address: [Buyer's shipping address].3.2 The delivery shall be completed within [Delivery timeframe].3.3 Any delay in delivery shall be notified to the Buyer in advance.Article 4: Quality and Warranty4.1 The Seller guarantees the quality of the products, which shall be in accordance with the specifications mentioned in Article 1.4.2 In case of any defect in the products, the Seller shall, at its own cost, replace or repair the defective products.Article 5: Risk and Ownership Transfer5.1 Risk of loss or damage to the products shall pass to the Buyer upon completion of delivery.5.2 Ownership of the products shall be transferred to the Buyer upon full payment by the Buyer.Article 6: Force Majeure6.1 If either party is prevented from performing its obligations due to force majeure events, such as natural disasters, war, riots, etc., such party shall notify the other party immediately and provide evidence of such force majeure event.6.2 The affected party shall use reasonable efforts to overcome the force majeure event and resume performance as soon as possible.Article 7: Termination7.1 This Contract may be terminated by either party giving written notice to the other party in case of material breach by the other party.7.2 In case of termination, the non-breaching party shall be entitled to compensation for any losses incurred due to the breach.Article 8: Miscellaneous8.1 This Contract is made in [number] copies, with each party holding one copy.8.2 Any amendment or modification to this Contract shall be made in writing and signed by both parties.8.3 This Contract shall be governed by and construed in accordance with the laws of [Country]. Any dispute arising out of or in connection with this Contract shall be settled through friendly negotiation between the parties or through arbitration in accordance with the laws of [Country].In witness whereof, the parties have signed this Contract in [City] on [Date].Seller: _____________________ (Authorized Representative)Buyer: _____________________ (Authorized Representative)篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller") and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual consultation and in accordance with relevant laws, have agreed to conclude this Sales Contract for the sale of the goods specified below.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of the goods, including name, specifications, quantity, and unit price].1.2 The total contract value is USD [Total Contract Value].Article 2: Terms of Delivery2.1 The goods shall be delivered by the Seller to the Buyer at [Delivery Point] on or before [Delivery Deadline].2.2 The mode of transportation shall be as agreed by both parties.Article 3: Terms of Payment3.1 The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Deadline] after the contract is signed.3.2 In case of any delay in payment, the Buyer shall pay a penalty to the Seller as per the delayed days.Article 4: Quality & Inspection4.1 The Seller shall ensure that the quality of the goods conforms to the contract specifications.4.2 The Buyer has the right to conduct inspections during production and before delivery.Article 5: Force Majeure5.1 In case of force majeure events, both parties shall be relieved from their responsibilities if such events hinder performance of the contract.Article 6: Warranty6.1 The Seller guarantees that the goods are new, free from defects, and comply with all applicable quality standards.Article 7: Confidentiality7.1 Both parties shall keep confidential any information related to this contract that is not meant for public disclosure.Article 8: Disputes8.1 Any dispute arising from or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its arbitration rules and procedures.Article 9: Miscellanea9.1 This Contract is made in both English and [Other Language] versions, with equal validity. In case of any discrepancies between the two versions, the English version shall prevail.9.2 This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Country].9.3 This Contract is effective as of the date of signing by both parties and shall remain valid until fully performed by both parties.9.4 Any amendment or modification to this Contract must be made in writing and approved by both parties. No change can be made unilaterally by either party without the written consent of the other party.篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached to this Contract, which details the product specifications, quantity, and unit price. The Seller shall ensure that the products comply with all applicable specifications and standards.2. Terms of PaymentPayment terms are as follows:a) The total contract value is [Contract Value] USD.b) Upon signing of this Contract, the Buyer shall deposit [Deposit Percentage]% of the total contract value as a deposit.c) Upon delivery of the products and receipt of the Seller's invoice, the Buyer shall make payment of the balance within [Payment Days] days.d) All payments shall be made through [Payment Method] or as otherwise agreed by both parties.3. Delivery and Shippinga) Delivery shall be made within [Delivery Period] from the date of this Contract.b) Shipping shall be arranged by the Seller, with transportation costs included in the contract price unless otherwise agreed.c) The Seller shall notify the Buyer of the expected delivery date and provide necessary shipping documents.d) Risk of loss or damage to the products shall pass to the Buyer upon delivery to the carrier.4. Quality Assurance and Warrantya) The Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications and standards.b) In case of any defect in quality or non-conformity with the contract, the Seller shall, at its own expense, replace or repair the products, or issue a credit note for the corresponding value.c) The Seller shall provide a warranty period of [Warranty Period] from the date of delivery for any defects in material or workmanship.5. ConfidentialityBoth parties shall keep confidential all information related to this Contract, including pricing, terms, and business strategies, unless otherwise agreed or required by law.6. Force MajeureIn case of force majeure events, such as natural disasters, war, riots, labor disputes, or government policies, which hinder or delay performance of this Contract, the affected party shall notifythe other party in writing within a reasonable time. The affected party shall use reasonable efforts to mitigate the consequences of such events.7. Disclaimers and Limitation of Liabilitya) Except for breaches of fundamental contractual obligations, neither party shall be liable for any consequential or indirect losses or damages arising from this Contract.b) The Seller's liability for any breach of contract is limited to replacement or repair of defective products or refund of the corresponding value as stated in Section 4.b).c) Neither party shall be liable for any failure to perform due to causes beyond its reasonable control.8. Law and JurisdictionThis Contract shall be governed by and interpreted in accordance with the laws of [Country]. Any disputes arising from or in connection with this Contract shall be settled amicably through negotiation. If no settlement can be reached, either party may submit such disputes to the jurisdiction of[Court/Tribunal].篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Customer Name] (hereinafter referred to as "Buyer").1. Product Description and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the following product: [Product Name]. The specific product details, including specifications, quality standards, quantity, and other related information, are listed in the attached document "Product Description and Specifications".2. Price and Payment Terms:The total price for the product is [Price] USD. The payment terms are as follows:* A deposit of [Deposit Percentage]% ([%]) of the total price shall be paid within [Deposit Payment Days] days from the date of this contract.* The balance of [Balance Payment] USD shall be paid within [Balance Payment Days] days prior to the date of delivery.All payments shall be made through [Payment Method] to the account specified by the Seller.3. Delivery and Shipping:The product shall be delivered within [Delivery Period] after receiving the final payment. The delivery location is [Delivery Address]. The means of transportation and risks during transportation shall be determined by mutual agreement between the Seller and the Buyer.4. Quality Inspection and Acceptance:The product shall be subject to inspection and acceptance by the Buyer at the time of delivery. If any defects or discrepancies are found, the Buyer shall notify the Seller immediately. The Seller shall then take appropriate measures to resolve any issues within a reasonable timeframe.5. Warranty and售后Service:The Seller guarantees that the product is new and in accordance with the specifications stated in the contract. The Seller shall provide warranty service for a period of [Warranty Period] from the date of delivery. During this period, any defects in material or workmanship shall be rectified by the Seller at no additional cost to the Buyer.6. Force Majeure:Neither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, government action, natural disasters, etc. However, the affected party shall notify the other party in a timely manner and make every effort to resume performance as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this contract that is not intended for public disclosure. This obligation shall continue even after the completion or termination of this contract.8. Dispute Resolution:Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Arbitration Institution] for arbitration in accordance with its arbitration rules and procedures. The arbitration award shall be final and binding on both parties.9. General Terms:This contract is made in English and is legally binding on both parties. Any amendments or modifications to this contractmust be made in writing and agreed upon by both parties. This contract shall be governed by the laws of [Jurisdiction]. Failure to exercise or delay in exercising any right under this contract shall not constitute a waiver of such right unless otherwise agreed in writing by both parties. This contract is in duplicate, with each party holding one original copy.Seller: _____________________ (Company Name)Buyer: _____________________ (Customer Name)Date: _____________________ (Contract Date)Signature of Seller: _____________________ (Signature)Signature of Buyer: _____________________ (Signature) and stamp if applicable.（盖章）篇7Sales ContractThis Sales Contract is made on [Date], between the following two parties:Party A: [Name of Company A]Address: [Address of Company A]Country: [Country of Company A]Party B: [Name of Company B]Address: [Address of Company B]Country: [Country of Company B]1. Product Description:Party A agrees to sell and Party B agrees to purchase the following products: [Product Name and Specifications]. Detailed product specifications and quality standards are attached as Annex I to this Contract.2. Quantity and Price:The quantity of the products to be sold is _______ (quantity) with a total value of _______ (currency and total amount). The unit price is _______ (currency and unit price).3. Terms of Payment:Payment shall be made in full through [specify payment method] within _______ (specify time period) after the signing of this contract. A copy of the payment receipt shall be submitted to Party A.4. Delivery and Shipping:Delivery shall be made within _______ (delivery timeframe) after receipt of the full payment. Shipping details including shipping address, carrier, and shipping insurance shall be mutually agreed upon by both parties.5. Quality Inspection and Warranty:Party A shall ensure the quality of the products in accordance with Annex I. Quality inspection shall be conducted at the time of delivery. Party A shall provide a warranty period of _______ (specify warranty period) from the date of delivery. During this period, any defects in quality shall be resolved by Party A in accordance with the warranty policy.6. Risk and Ownership Transfer:Risk and ownership of the products shall transfer to Party B upon successful completion of delivery and receipt of the products by Party B.7. Confidentiality:Both parties shall keep confidential all information related to this contract, including product specifications, pricing, and business strategies, unless otherwise agreed or required by law.8. Force Majeure:In case of force majeure events such as natural disasters, wars, political unrest, or other unforeseeable events that hinder the performance of this contract, both parties shall be relieved of their responsibilities in a timely and reasonable manner.9. Dispute Resolution:Any disputes arising from or in connection with this contract shall be resolved through friendly negotiation between both parties. If no settlement can be reached, the dispute shall be submitted to the courts located in the jurisdiction of _______ (specify location) for resolution.10. Miscellaneous:This contract is made in both English and [specify other language if necessary], with equal legal effects. This contract is effective as of the date of signing by both parties and shall be binding on both parties. Any modifications or supplements to this contract shall be made in writing and shall be subject to the approval of both parties. This contract shall be governed by the laws of _______ (specify country/jurisdiction).In witness whereof, the parties have signed this contract:Party A: _____________________ (Company Name)(Authorized Representative)Signature: _____________________Date: _____________________Party B: _____________________ (Company Name)(Authorized Representative)Signature: _____________________Date: _____________________Annex I: Product Specifications and Quality Standards(To be attached separately)[Note: The above template is a general sales contract and may require adjustments based on specific circumstances.]。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

商品交易合同范文(中英对照)4篇

商品交易合同范文(中英对照)4篇篇1Commodity Trading Contract Sample商品交易合同范文Party A: [Seller] Party B: [Buyer]甲方：[卖方] 乙方：[买方]Date: [Date]日期：[日期]This Commodity Trading Contract (the "Contract") is entered into by and between Party A and Party B on the date above written.本商品交易合同（以下简称“合同”）由甲方和乙方于上述日期签订。

1. Commodity Description 商品描述Party A agrees to sell and Party B agrees to purchase the following commodities:甲方同意销售，乙方同意购买以下商品：Name: [Commodity Name] 名称：[商品名称]Quantity: [Quantity] 数量：[数量]Quality: [Quality] 质量：[质量]2. Price 价格The total price for the commodities shall be [Total Price], payable by Party B to Party A in [Currency] upon delivery of the commodities.商品的总价格为[总价]，乙方应在交付商品时支付给甲方[币种]。

3. Payment Term 付款条件Party B shall make the payment in full by [Payment Method] within [Number] days after signing this Contract.乙方应在签署本合同后[数量]天内通过[付款方式]全额支付。

销售合同英文范本7篇

销售合同英文范本7篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the goods listed below to the Buyer on the terms and conditions stated below:1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products with specific details such as item name, quantity, specifications, unit price, total value, etc.]2. Terms of Payment:2.1 The total value of the contract shall be paid in full by the Buyer to the Seller through [specify payment method such aswire transfer, credit card, etc.] within [specify timeframe such as 30 days of signing the contract].2.2 In case of delayed payment, the Buyer shall pay a penalty to the Seller equal to [specify percentage] of the total contract value for each week of delay.3. Delivery:3.1 The Seller shall deliver the products to the Buyer at the agreed place of delivery within [specify timeframe such as 30 days] from the date of receipt of payment.3.2 Any delay in delivery not caused by Force Majeure shall be considered a breach of contract.4. Quality Assurance:The Seller guarantees that the products are new and comply with all applicable specifications and standards. The Seller shall replace any defective products free of charge within [specify timeframe such as 3 months] from the date of delivery.5. Ownership and Risk Transfer:Ownership and risk of loss or damage to the products shall pass to the Buyer upon delivery at the agreed place of delivery.6. Warranty:The Seller provides a warranty for the products covering any manufacturing defects for a period of [specify duration such as 1 year] from the date of delivery. During this period, the Seller shall replace or repair any defective products free of charge.7. Force Majeure:If performance of this contract is prevented, restricted or delayed due to Force Majeure circumstances, the Seller shall notify the Buyer promptly and take appropriate measures to ensure prompt performance under such circumstances.8. Confidentiality:Both parties shall keep confidential all information related to this contract that is not intended for public disclosure.9. Disputes Resolution:Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institute or court] for arbitration or legal action.10. Miscellaneous:This contract constitutes the entire agreement between the Buyer and the Seller and supersedes any prior agreements orunderstandings, whether oral or written, regarding the subject matter of this contract. No modifications to this contract shall be binding unless made in writing and signed by both parties. This contract shall be governed by and construed in accordance with the laws of [specify country].IN WITNESS WHEREOF, the parties have executed this contract in [specify place] on [specify date].Buyer Signature: _____________________________________Date: _____________________Seller Signature: _____________________________________Date: _____________________Note: This Sales Contract template is for reference only and should be customized according to specific needs and circumstances. It is recommended to have legal professionals review any legal document before its execution.篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: [Name of Seller]Party B: [Name of Buyer]1. Scope of Contract:This Contract stipulates the terms and conditions for the sale and purchase of the following products: [Product Description, Quantity, Quality, Specifications, etc.] (hereinafter referred to as "Products"). The parties agree to strictly adhere to the terms and conditions set out below.2. Product Description:[Description of the product to be sold, including specifications, quality standards, quantity, etc.]3. Price and Payment:3.1 The total price for the Products shall be [Price in agreed currency].3.2 Payment terms: [Specify payment terms such as T/T in advance, L/C, D/P, etc.]3.3 Any changes to the price or payment terms must be mutually agreed upon in writing.4. Delivery and Shipment:4.1 Delivery Date: [Specify delivery date].4.2 Delivery Location: [Specify delivery location].4.3 Shipping Documents: [Specify required shipping documents].4.4 Risks and responsibilities for the Products shall pass to Party B upon delivery. Any delay in delivery shall be mutually discussed and resolved in writing.5. Quality and Inspection:5.1 Party A shall ensure that the Products comply with the agreed quality standards.5.2 Party B shall have the right to inspect the Products before delivery to ensure quality compliance.5.3 If any defects are found during inspection, Party A shall be responsible for rectifying or replacing the Products as per the agreed terms.6. Force Majeure:In case of any force majeure events such as natural disasters, war, strikes, government policies, etc., which hinder the performance of this Contract, the affected party shall notify the other party in writing within a reasonable period of time and take measures to mitigate the effects of such events. The period of performance may be extended accordingly.7. Warranty:Party A shall provide a warranty for the Products as per the terms and conditions agreed upon by both parties. Any defects in the Products shall be rectified or replaced as per the warranty terms.8. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract and its execution, except for any information that is in the public domain or required to be disclosed by law or regulatory authorities.9. Dispute Resolution:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institution or court] forarbitration/settlement in accordance with [specify applicable laws]. The arbitration award shall be final and binding on both parties.10. Termination:This Contract may be terminated by either party in the event of a breach by the other party which is not rectified within a reasonable period of time. Termination shall be notified to the other party in writing with reasonable grounds for termination stated. The provisions of this Contract which by their nature would survive termination shall remain in full force and effect after termination.篇3SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller," whereby the Buyer agrees to purchase from the Seller and the Seller agrees to sell to the Buyer the under mentioned commodity subject to the terms and conditions stipulated below:兹有买方[买方名称]与卖方[卖方名称]（以下简称“卖方”）订立本合同，买方同意向卖方购买，卖方同意出售以下列条款规定的商品：Article 1: Commodity商品The commodity to be delivered under this Contract shall be as follows: [商品名称、规格、数量及价格等详细信息]。

英文外贸销售合同6篇

英文外贸销售合同6篇篇1Contract for Foreign Trade SalesThis contract is made by and between [买方公司名称] (hereinafter referred to as the Buyer) and [卖方公司名称]（hereinafter referred to as the Seller）, whereby the Buyer agrees to purchase from the Seller and the Seller agrees to sell the following commodity to the Buyer on the terms and conditions stipulated below:I. Description of Commodity （商品描述）[请根据实际情况详细列明销售的商品名称、型号、规格等描述信息。

此部分内容为范例，可以根据实际需求进行调整。

]II. Quantity （数量）[请根据实际情况详细列明销售商品的数量。

此部分内容为范例，可以根据实际需求进行调整。

]III. Price （价格）The Seller shall sell the commodity to the Buyer at the contract price listed below （或在合同专用条款中注明）. The total contract price (including any additional expenses) shall be paid in full by the Buyer to the Seller within XX days from the date of this Contract. [请根据实际情况详细列明价格条款，包括计价货币、计价方式、支付方式和支付期限等。

]IV. Terms of Delivery （交货条款）The Seller shall deliver the commodity to the Buyer in XX days after receipt of the Buyer’s credit and/or sight L/C in strict accordance with the terms of this Contract. [根据实际情况列明交货或提供服务的时间、地点和方式等条款信息。

英文销售合同模板6篇

英文销售合同模板6篇篇1This Sales Contract is made by and between the following parties:Seller:Name: _____________________________Address: _____________________________Country: _____________________________Buyer:Name: _____________________________Address: _____________________________Country: _____________________________Article 1: Contract CommoditiesThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [商品名称、规格、数量、单价等具体信息]。

Article 2: Price and PaymentThe total contract price is ________ (货币和金额). The payment terms are as follows: [支付条款，包括预付款、发货后付款、付款方式等]。

Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following place: [交货地点和时间]。

The Seller shall ensure timely delivery according to the agreed schedule.Article 4: Quality and InspectionThe quality of the goods shall comply with the specifications specified in this contract. The Buyer shall have the right to inspect the goods during production and prior to shipment. [商品质量标准、检验方法、争议解决等条款]。

销售合同英文版7篇

销售合同英文版7篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of the goods, including their specifications, quantity, and other relevant details].2. Price and Payment2.1 The total price for the goods shall be [Total Price in figures and words]. The price includes all costs related to packaging, transportation, insurance, and customs duties.2.2 Payment shall be made as follows: [Details of payment terms, including down payment, balance payment, and due dates].3. Delivery3.1 The Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address].3.2 The delivery shall be made within [Delivery timeframe] from the date of this Contract.4. Quality and Inspection4.1 The Seller guarantees that the goods shall be of good quality and shall comply with all applicable standards and specifications.4.2 The Buyer shall have the right to inspect the goods during production and prior to delivery.5. Risk and Ownership5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery.5.2 Ownership of the goods shall pass to the Buyer upon full payment by the Buyer.6. Warranty and售后保障The Seller shall provide a warranty for the goods for a period of [Warranty Period] from the date of delivery. During this period, any defects in material or workmanship shall be rectified by the Seller at its own cost.7. Force MajeureThe Seller shall not be liable for any delay in delivery due to force majeure events beyond its reasonable control.8. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of breach by the other party. In such case, the non-breaching party shall be entitled to claim compensation for any losses incurred.10. DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly consultation between the parties. If no settlement can be reached, the dispute shall besubmitted to [Place of arbitration] for arbitration in accordance with its rules.篇2SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made and concluded on [Date] between [Company Name] (hereinafter called "the Seller"), and [Company Name] (hereinafter called "the Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of the goods, including model number, specifications, quantity, and any other relevant details].2. Price and Payment2.1 The total price for the goods shall be [Total Price in Numbers and Currency] (ex-works price).2.2 Payment terms: [Specify payment terms, such as T/T (Telegraphic Transfer), L/C (Letter of Credit), etc.]2.3 The Buyer shall make the payment within [Time limit for payment].3. Delivery3.1 The Seller shall deliver the goods to the port specified by the Buyer within [Delivery timeframe].3.2 Any delay in delivery shall be notified to the Buyer in writing at least [Number of days] days prior to the agreed delivery date.4. Quality Assurance4.1 The Seller guarantees that the goods shall be of the best quality and shall conform to the specifications mentioned in Annexure A (Attached Quality Standards).4.2 In case of any defect in quality or specifications, the Seller shall replace the goods or refund the cost, at its option.5. Risk and Title Transfer5.1 Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the port specified by the Buyer.5.2 Title to the goods shall be transferred to the Buyer upon full payment by the Buyer.6. Warranty and After-Sales Service6.1 The Seller shall provide a warranty period of [Warranty Period in Months] months from the date of delivery for any manufacturing defects in the goods.6.2 The Seller shall provide after-sales service as specified in Annexure B (After-Sales Service Agreement).7. Force MajeureIn case of force majeure events, such as war, riots, natural disasters, etc., which hinder or prevent performance of this Contract, the Seller shall notify the Buyer immediately and both parties shall discuss and agree on a solution accordingly.8. TerminationThis Contract may be terminated by either party giving a written notice to the other party in case of fundamental breach by either party. The non-breaching party shall be entitled to compensation for any losses incurred due to such breach.9. Disputes ResolutionAny dispute arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, either party may submit such dispute to [Arbitration institution] for arbitration inaccordance with its arbitration rules and procedures. The arbitration award shall be final and binding on both parties.10. General TermsThe parties have signed this Contract in two counterparts, each party retaining one counterpart for their records.Buyer: _____________________ Date: _____________Seller: _____________________ Date: _____________附件A: 商品规格与质量标准附件B: 售后服务协议（根据实际合同内容填写）请注意本合同仅为示例并非专业法律意见。

外贸销售合同英文版6篇

外贸销售合同英文版6篇篇1Foreign Trade Sales ContractContract Number: [Insert Contract Number]Date of Contract: [Insert Date]Seller:Name of Company: [Insert Seller’s Company Name] Address: [Insert Seller’s Address]Country: [Insert Seller’s Country]Buyer:Name of Company: [Insert Buyer’s Company Name] Address: [Insert Buyer’s Address]Country: [Insert Buyer’s Country]In consideration of the mutual promises and conditions set forth below, the Seller and the Buyer agree to enter into this Foreign Trade Sales Contract:Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the following products: [Insert detailed list of products, including product name, specifications, quantity, and unit price].Article 2: DeliveryThe Seller shall deliver the products to the Buyer at the following location: [Insert delivery location]. The delivery date shall be no later than [Insert delivery date].Article 3: PaymentThe Buyer shall make payment in full via [Insert agreed payment method (e.g., T/T transfer, L/C, etc.)]. Payment terms shall be as follows: [Insert payment terms (e.g., 30% advance, balance against delivery, etc.)].Article 4: Quality and InspectionThe Seller shall ensure that the products are of the agreed quality. The Buyer shall have the right to conduct inspectionsupon receipt of the products. If any defects are found, the Seller shall be responsible for rectifying or replacing the products.Article 5: Force MajeureIf performance of this Contract is prevented, restricted or delayed due to any cause beyond the control of either party, such party shall notify the other promptly and provide sufficient evidence to prove such occurrence. The affected party shall strive to overcome the hindrance and continue performance as soon as possible.Article 6: WarrantyThe Seller guarantees that the products are free from any defects in material and workmanship and agrees to replace or repair any defective products, at its option, within a period of [Insert warranty period] from the date of delivery to the Buyer.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall survive the termination of this Contract.Article 8: Liability for Breach of ContractIf any party fails to perform its obligations under this Contract, the non-breaching party may claim compensation for any losses incurred. If such breach is fundamental, thenon-breaching party may terminate this Contract.Article 9: Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Insert applicable country/region]. Any disputes arising from or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [Insert applicable court/tribunal] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the subject matter hereof and supersedes all prior agreements, understandings and communications, whether oral or written. No modification or amendment of this Contract shall be binding unless made in writing and signed by both parties.IN WITNESS WHEREOF, the Seller and the Buyer have signed this Contract in [Insert number] counterparts, each party retaining one counterpart.Seller: _____________________ Date: _________________(Signature of Seller) (Date of Signature)Buyer: _____________________ Date: _________________(Signature of Buyer) (Date of Signature)Note: This is a legal document and should be reviewed by legal counsel before execution. The above terms are subject to negotiation and may be modified as per the parties’ agreement.篇2This Sales Contract is made by and between the Buyer and the Seller:Buyer: _________________ (hereinafter referred to as "Party A") Seller: _________________ (hereinafter referred to as "Party B")WHEREAS the Buyer is interested in purchasing certain goods from the Seller, and the Seller is willing to sell the goods to the Buyer on the terms and conditions set out in this Contract.NOW, THEREFORE, the parties hereby agree as follows:Article 1: Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following goods:（产品描述和数量）Article 2: Price and Payment TermsThe price of the goods shall be （价格）. The payment terms are as follows: （支付条款）.Article 3: Delivery and ShippingThe Seller shall deliver the goods to the Buyer's designated port within （交货期限）. The shipping terms are as follows: （运输和装运条款）.Article 4: Quality and InspectionThe Seller shall ensure that the goods are in accordance with the contracted quality standards. The Buyer shall have the right to inspect the goods prior to shipment. （质量和检验条款）Article 5: Terms of WarrantyThe Seller shall provide a warranty for the goods, covering any defects in material or workmanship for a period of （保修条款）.Article 6: Force MajeureIf either party is prevented from performing this Contract due to force majeure, the affected party shall notify the other party immediately and take reasonable measures to mitigate the losses. （不可抗力条款）Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract, which is not intended for public disclosure. （保密条款）Article 8: Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to （争议解决方式）.Article 9: Applicable Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of （适用法律和司法管辖）.Article 10: Miscellaneous（其他条款）IN WITNESS WHEREOF, the parties have executed this Contract in duplicate, each party holding one original.Buyer: ________________(Signature)Date: ________Seller: ________________(Signature)Date: ________篇3Contract for Foreign Trade Sales甲方（买方）：____________乙方（卖方）：____________根据平等互利原则，经友好协商，甲乙双方就甲方向乙方购买产品事宜达成如下协议：This contract is made by and between Party A (Buyer) and Party B (Seller) on the basis of equality and mutual benefit, through friendly consultation, for the purpose of purchasing products from Party B by Party A.一、产品描述及规格（Product Description and Specifications）1. 产品名称：____________2. 型号/规格：____________3. 数量：____________4. 单价：____________5. 总价：____________6. 质量标准：按照国际标准和双方协商的质量要求执行。

中英文销售合同7篇

中英文销售合同7篇篇1甲方（卖方）：_____________联系方式：_____________地址：_____________公司名称及法律形式：_____________公司营业范围及经营资质：营业执照所载范围的经营资格。

合法授权签署本协议资格及开展协议规定相关活动的权利能力。

若因甲方不具备前述资格和能力而导致本协议无法履行或履行不当所产生的所有责任均由甲方承担。

乙方（买方）：_____________联系方式：_____________地址：_____________一、CONTRACTING PARTIES （合同双方）二、Terms and Clauses （合同条款）篇2销售合同（Sales Contract）甲方（卖方）：___________ （以下简称“卖方”）乙方（买方）：___________ （以下简称“买方”）鉴于买方愿意购买卖方所提供的商品，双方本着平等、自愿、互利的原则，经友好协商，达成如下协议：一、商品描述及规格（一）商品描述商品名称：___________型号/规格：___________品牌：___________质量及标准：按照双方约定标准及国家相关标准执行。

（二）数量及单价商品数量：___________单价（含包装费用）：___________ （货币单位）总价：根据商品数量与单价计算得出。

二、交货条款（一）交货期限卖方应在合同签署后的___天内完成交货。

（二）交货地点双方约定的交货地点为___________。

（三）运输方式及费用承担运输方式：___________；费用承担：___________。

三、付款条款（一）付款方式付款方式为___________（如：电汇、信用证等）。

（二）付款时间买方在收到货物并确认质量无误后___天内完成付款。

四、质量保证及售后条款卖方应保证所售商品的质量符合约定，并承担售后服务责任。

详细内容见附加协议。

五、违约责任如双方中的任何一方违反本合同的任何条款，违约方需承担相应的法律责任。

英文销售合同范文参考6篇

英文销售合同范文参考6篇篇1Sales ContractThis Sales Contract (the “Contract”) is made and entered into on [date] by and between [Seller], with its principal place of business at [address] (the “Seller”), and [Buyer], with its principal place of business at [address] (the “Buyer”).1. Product DetailsThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name: [product name]- Quantity: [quantity]- Price Per Unit: [price]- Total Price: [total price]- Delivery Date: [delivery date]2. Payment TermsThe Buyer agrees to pay the total price as specified in the Contract within [number] days from the date of delivery. Payment shall be made in [currency] via [payment method].3. Delivery and InspectionThe Seller shall deliver the products to the Buyer’s premises on the agreed delivery date. The Buyer shall inspect the products upon delivery and notify the Seller of any defects or damages within [number] days.4. Title and Risk of LossTitle and risk of loss shall pass from the Seller to the Buyer upon delivery of the products. The Seller shall bear the risk of loss until the products are delivered to the Buyer.5. WarrantiesThe Seller warrants that the products are free from defects in materials and workmanship and conform to the specifications as stated in the Contract. The Seller shall replace any defective products at no additional cost to the Buyer.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [state/country].7. Entire AgreementThis Contract constitutes the entire agreement between the Seller and the Buyer and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]Name: __________________Title: __________________Date: _________________[Buyer]Name: __________________Title: __________________Date: _________________This Sales Contract is hereby accepted and approved by both parties.Date: _______________篇2Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address], and [Buyer], located at [Buyer's Address].1. Sale of GoodsSeller agrees to sell, transfer and deliver to Buyer, and Buyer agrees to purchase and accept from Seller, the following goods:Description of Goods:Quantity:Price:Delivery Date:Delivery Location:2. Payment TermsThe total purchase price for the goods shall be [Total Amount]. Payment shall be made in [Currency] to Seller by [Payment Method] no later than [Payment Deadline]. Any additional charges or taxes related to the purchase of the goods shall be borne by Buyer.3. DeliverySeller shall deliver the goods to the specified Delivery Location on the agreed Delivery Date. If Seller fails to deliver the goods by the agreed upon Delivery Date, Buyer may cancel this Contract and request a full refund of any payments made.4. Inspection and AcceptanceUpon delivery of the goods, Buyer shall inspect and accept the goods within [Number] days. If Buyer finds the goods to be defective or not as described, Buyer must notify Seller in writing within [Number] days of delivery. Seller shall have the option to either replace the goods or issue a refund to Buyer.5. Title and Risk of LossTitle to the goods shall pass to Buyer upon delivery to the Delivery Location. Risk of loss of the goods shall pass to Buyer upon delivery to the carrier for shipment.6. WarrantiesSeller warrants that the goods shall conform to the description provided and be free from defects in material and workmanship. Seller makes no other warranties, express or implied.7. Limitation of LiabilityIn no event shall either Party be liable to the other for any indirect, special, incidental, or consequential damages arising out of or in connection with the Contract, even if advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller:Name:Title:Date:Buyer:Name:Title:Date:This Sales Contract represents the entire agreement between the Parties concerning the sale of the goods describedherein and supersedes any prior agreements or understandings, whether written or oral.篇3Sales ContractThis Sales Contract is entered into on [Date] between [Seller], with its principal place of business at [Address], and [Buyer], with its principal place of business at [Address].1. Description of Goods:The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity], at a price of [Price] per unit.2. Delivery:The Seller shall deliver the goods to the Buyer at [Delivery Location] on [Delivery Date]. The Buyer shall be responsible for all costs associated with the delivery of the goods.3. Payment:The Buyer shall pay the Seller the total purchase price of [Total Amount] in full on or before the date of delivery. Payment shall be made in [Currency] by [Payment Method].4. Inspection and Acceptance:The Buyer shall have [Number of Days] days from the date of delivery to inspect the goods and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within this time period, the goods shall be deemed accepted.5. Warranty:The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period] from the date of delivery. If the goods are found to be defective within this time period, the Seller shall replace the goods or refund the purchase price at its discretion.6. Governing Law:This Sales Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising under this contract shall be resolved through arbitration in [Arbitration Location].7. Entire Agreement:This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the sale of the goods and supersedes all prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.Seller: Buyer:[Name] [Name][Title] [Title][Date] [Date]篇4Sales ContractThis Sales Contract (the “Contract”) is entered into on [Date], between [Seller Name], with a registered address at [Seller Address] (hereinafter referred to as the “Seller”), and [Buyer Name], with a registered address at [Buyer Address] (hereinafter referred to as the “Buyer”).1. Products: The Seller agrees to sell and deliver to the Buyer the products as described in Exhibit A attached hereto (the “Products”).2. Quantity and Price: The Buyer agrees to purchase the quantity of Products as set forth in Exhibit A at the unit price as agreed upon by both parties.3. Payment: The Buyer shall make payment for the Products in the currency specified in Exhibit A. Payment shall be made in [Payment Method] and shall be due within [Number] days of receipt of an invoice from the Seller.4. Delivery: The Seller shall deliver the Products to the Buyer at the delivery address specified in Exhibit A. Delivery shall be made in accordance with the agreed-upon delivery schedule.5. Quality: The Seller warrants that the Products shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. If the Products do not conform to the specifications, the Buyer may reject the Products and the Seller shall replace them at no additional cost to the Buyer.6. Risk of Loss: The risk of loss shall pass to the Buyer upon delivery of the Products to the carrier at the Seller’s facility.7. Intellectual Property: Any intellectual property rights in the Products shall remain with the Seller, and the Buyer shall have no right, title or interest in or to such rights.8. Termination: Either party may terminate this Contract upon written notice if the other party breaches any material termof the Contract and fails to cure such breach within [Number] days of receiving notice of the breach.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising under this Contract shall be resolved exclusively by the courts of [Jurisdiction].10. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:[Signature][Print Name]Date:Buyer:[Signature][Print Name]Date:Exhibit A(Product Description, Quantity, Price, and Delivery Schedule)This is a sample template for a sales contract and should be customized to meet the specific needs of the parties involved. It is recommended to seek legal advice before entering into any agreement.篇5Sales ContractThis Sales Contract ("Contract") is entered into on this (date), between (Seller) and (Buyer), collectively referred to as the “Parties”.1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of the product- Quantity- Price per unit- Total price2. DeliveryThe Seller shall deliver the products to the Buyer's place of business within (number of days) days from the date of this Contract. The Buyer shall bear all costs associated with the delivery.3. Payment TermsThe Buyer shall pay the Seller the total price of the products within (number of days) days from the date of delivery. Payment shall be made in (currency) by (method of payment).4. Inspection and AcceptanceThe Buyer shall inspect the products upon delivery. If the products do not conform to the specifications outlined in this Contract, the Buyer shall have the right to reject the products. The Seller shall replace the rejected products at no additional cost to the Buyer.5. WarrantyThe Seller warrants that the products are free from defects in materials and workmanship. The warranty period is (number of days) days from the date of delivery. If any defects are discovered during the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of (state or country).7. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the sale of the products and supersedes all prior agreements, discussions, or understandings, whether written or oral.In witness whereof, the Parties have executed this Contract as of the date first written above.(Seller) (Buyer)__________________________________________________________Signature Signature__________________________________________________________Printed Name Printed NameDate:______________ Date:_______________This Sales Contract is a legally binding agreement that details the terms of the sale of products between a Seller and a Buyer. It outlines the product description, delivery terms, payment terms, inspection and acceptance procedures, warranty information, governing law, and serves as the entire agreement between the parties. It is important for both parties to carefully review and understand the terms of the Contract before signing to avoid any disputes or misunderstandings in the future.篇6Sales ContractThis Sales Contract (the "Contract") is made and entered into on this [Date], by and between [Seller], hereinafter referred to as the "Seller", and [Buyer], hereinafter referred to as the "Buyer".1. The Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description of Goods: [Description]- Quantity: [Quantity]- Price: [Price]2. Delivery:- The Seller shall deliver the goods to the Buyer at the following address: [Delivery Address].- The delivery date shall be on or before [Delivery Date].3. Payment:- The Buyer shall pay the total price of the goods to the Seller in the following manner: [Payment Terms].- The payment is due by [Payment Due Date].4. Title and Risk of Loss:- Title to the goods shall pass to the Buyer upon payment in full.- The risk of loss of the goods shall pass to the Buyer upon delivery.5. Inspection:- The Buyer has the right to inspect the goods upon delivery.- Any defects or discrepancies found during inspection must be reported to the Seller within [Number] days of delivery.6. Warranties:- The Seller warrants that the goods are free from defects in materials and workmanship.- The Seller's liability under this warranty is limited to the replacement or repair of the goods.7. Governing Law:- This Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire Agreement:- This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Signature of Seller] [Signature of Buyer]。

英文版销售合同范本6篇

英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer's Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods including item number, name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Origin of Goods].Article 3: Price and PaymentThe total price of the goods shall be [Total Price]. The payment shall be made in [Currency] through [Payment Method] within [Payment Period].Article 4: Terms of DeliveryThe delivery of the goods shall be made by [Delivery Method] at the port of [Port of Delivery]. The risk of loss or damage shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods before and after delivery. If any defects are found, the Seller shall promptly rectify or replace the goods.Article 6: Packing and MarkingThe goods shall be properly packed and marked in accordance with the usual practices for transportation. The Seller shall bear all costs related to packing and marking.Article 7: Delay and Force MajeureArticle 8: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [Warranty Period] for the goods. During this period, any defects in material or workmanship shall be rectified by the Seller without additional charge to the Buyer. The Seller shall also provide after-sales service as agreed upon by both parties.Article 9: DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Dispute Resolution Mechanism] for arbitration or legal proceedings.Article 10: General ProvisionsIn witness whereof, the Seller and the Buyer have signed this contract at [Place] on [Date].Seller: _________________________ (Company Name & Signature)Buyer: _________________________ (Buyer's Name & Signature)Date: _________________________Place: _________________________(Note: This is a template Sales Contract and should be used as a reference only. It is recommended to consult with legal professionals for advice on specific terms and conditions.)篇2SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the goods specified in Annex A (Product Description and Quantity) to this Contract.2. Price and Payment2.1 The Price of the goods shall be as stated in Annex A. The Price shall be paid in the currency specified in Annex B (Payment Terms).2.2 Payment terms are specified in Annex B and shall be strictly adhered to by both parties.3. Delivery and Quality Assurance3.1 Delivery of the goods shall be made according to the terms specified in Annex C (Delivery Terms).3.2 The Seller guarantees that the goods shall be of the quality as described in Annex D (Quality Assurance) and shall comply with all applicable laws and regulations in the country of destination.4. Terms of Delivery and Risk Transfer4.1 The risk of loss or damage to the goods shall pass to the Buyer upon delivery as specified in Annex C.5. Warranty and After-Sales Service5.1 The Seller shall provide a warranty for the goods as specified in Annex E (Warranty and After-Sales Service).6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract, except for information that is already in the public domain or obtained through lawful means.7. Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, war, riots, or other events beyond their reasonable control.8. Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party that is not cured within a reasonable period of time.9. Dispute Resolution9.1 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If no settlement can be reached, the dispute shall befinally settled by arbitration in accordance with the rules of [Arbitration Institution].10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.10.2 This Contract is written in both English and [other language(s)], with the English version prevailing in case of any discrepancies.10.3 The laws of [Country] shall apply to this Contract.In Witness Whereof, the parties have executed this Contract in duplicate originals, each party retaining one original for their records.Seller: ____________________ (Authorized Representative)Date: ________Buyer: ____________________ (Authorized Representative)Date: ________篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and concluded on __ DATE __ between Seller: __NAME OF SELLER__ (hereinafter referred to as "Seller") and Buyer:__NAME OF BUYER__ (hereinafter referred to as "Buyer").1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the following products (hereinafter referred to as "Products"): __PRODUCT DESCRIPTION AND SPECIFICATIONS__.2. Terms of Payment2.1 The total contract value is __CONTRACT VALUE__. The Buyer shall make payment through __PAYMENT METHOD__.2.2 The payment terms are as follows:* A deposit of __PERCENTAGE OF DEPOSIT__ is to be paid within __TIME FRAME__ after signing this Contract.* The balance of the payment shall be made upon the delivery of Products and acceptance by the Buyer.3. Delivery and Shipping3.1 The Products shall be delivered to the Buyer at__SHIPPING ADDRESS__.3.2 The delivery date is __DELIVERY DATE__. The Seller shall inform the Buyer promptly if there is any delay in delivery.4. Quality Assurance4.1 The Seller guarantees that the Products shall be in conformity with the following specifications and quality standards: __PRODUCT SPECIFICATIONS AND QUALITY STANDARDS__.4.2 If the Products fail to meet the specified quality standards, the Buyer shall have the right to reject the Products or claim compensation.5. Warranty and After-Sales Service5.1 The Seller provides a warranty period of __WARRANTY PERIOD__ for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge.5.2 The Seller shall provide after-sales service in accordance with the terms and conditions agreed upon by both parties.6. Risks and Liabilities6.1 Risk of loss or damage to the Products passes to the Buyer upon delivery. However, if the Products are lost or damaged during transportation, the Seller shall be responsible for making good the loss or damage.6.2 Neither party shall be liable for any failure to perform its obligations due to force majeure events, such as natural disasters, wars, riots, etc.7. Confidentiality7.1 Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. Settlement of Disputes8.1 Any disputes arising from or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute may be submitted to arbitration at __ARBITRATION PLACE__ in accordance with __ARBITRATION RULES__.9. Force of Law and Jurisdiction9.1 This Contract shall be governed by and construed in accordance with the laws of __COUNTRIES/JURISDICTIONS__.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.10.2 This Contract is made in __NUMBER OF COPIES__ copies, each copy having equal legal effect.10.3 If any provision of this Contract is invalid or unenforceable, it shall not affect the validity and enforceability of the remaining provisions.The parties have read and understood all the terms and conditions stated above and have signed this Contract in witness thereof:Seller:Name: __NAME OF SELLER__Signature: ________________________Date: __DATE__Buyer:Name: __NAME OF BUYER__Signature: ________________________Date: __DATE__篇4SALES CONTRACTThis Sales Contract is made on [合同生效日期] by and between [卖方全称及注册地址], a legal entity duly organized under the laws of [卖方所在国家名称], hereinafter referred to as "Seller" and [买方全称及注册地址], a legal entity duly organized under the laws of [买方所在国家名称], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [商品名称及规格] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the commodity shall be fixed at [商品定价].2.2 Payment shall be made by [支付方式，例如：T/T电汇，L/C信用证等]. Details are as follows: [支付细节及时间表].3. DeliveryThe Seller shall deliver the goods to the port of [交货港口] no later than [最晚交货日期].4. Quality and Inspection4.2 The Buyer shall have the right to conductinspection/supervision of the goods during production process at Seller's factory at any time after receiving a written request from Seller. Details of such inspection shall be agreed mutually by both parties.5. Risk and Transfer of OwnershipThe risk of loss or damage to the goods shall be borne by the Seller until delivery of the goods to the port of destination specified in Article 3 above, at which point ownership shall pass to the Buyer.6. Packing and Shipping Marks7. Insurance8. Warranty and Claims篇5SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and Buyer shall be identified as per the signatures at the end of this Contract.Article 2: Product DescriptionThe Product to be sold is [describe the product clearly]. Additionally, any relevant specifications, dimensions, or other necessary information must be stated clearly in this section.Article 3: Quantity and Unit PriceThe Seller agrees to sell and the Buyer agrees to purchase [quantity] of the Product, with a unit price of [unit price].Article 4: Terms of Payment4.1 Payment shall be made within [specify the time period,e.g., 30 days] after the date of receipt of invoice.4.2 The mode of payment shall be [specify the mode, e.g., T/T (Telegraphic Transfer) or L/C (Letter of Credit)].4.3 In case of L/C, the Buyer shall open an irrevocable L/C in favor of the Seller.Article 5: Delivery5.1 The Product shall be delivered at [delivery location].5.2 The delivery shall be made within [specify the time period].5.3 Any delay in delivery shall be notified to the Buyer in advance.Article 6: Quality AssuranceThe Seller guarantees that the Product shall be in accordance with the specifications mentioned in Article 2 and shall be free from any defects in material and workmanship.Article 7: WarrantyThe Seller provides a warranty for the Product as follows: [describe the warranty terms].Article 8: Force MajeureIn case of force majeure events, both parties shall be relieved from their obligations under this Contract to the extent of such events.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: LiabilitiesIn case of any breach of Contract by either party, the other party shall have the right to claim damages.Article 11: DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify the court or arbitration institution] for resolution.Article 12: Miscellanea篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer Name] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products, including name, specifications, quantity, and agreed-upon unit price].2. Terms of PaymentPayment shall be made in advance by [Method of Payment] (e.g., wire transfer, credit card, etc.) within [Time Limit] from the date of the Contract. A copy of the bank receipt as evidence of payment shall be promptly sent to the Seller after payment.3. Delivery and ShippingThe Seller shall deliver the products to the Buyer at the agreed quantity and quality within [Delivery Timeframe]. Shipping shall be arranged by the Buyer at the Buyer's cost. Any delay in delivery due to reasons beyond the Seller's control shall be promptly notified to the Buyer.4. Quality AssuranceThe Seller guarantees that the products shall be in accordance with the agreed specifications and free from any defects in material and workmanship. Should any defects be found, the Seller shall promptly replace or repair such products at no additional cost to the Buyer.5. Warranty and Liabilities6. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, earthquakes, floods, fires, etc. Should such events occur, the affected party shall promptly notify the other party of the situation and its impact on performance.7. ConfidentialityBoth parties shall maintain confidentiality of any information related to this Contract that is not intended for public disclosure. Such information includes business secrets, technical data, pricing, and other confidential matters agreed upon by both parties.8. TerminationThis Contract may be terminated by either party in case of default by the other party that cannot be rectified within areasonable period of time. Any termination must be notified to the other party in writing and shall be effective upon receipt of such notification.9. Law and Jurisdiction10. Miscellaneous。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

商品销售合同范本（英文）合同编号：contract no:签订地点：signed at:签订日期：date:买方：the buyers：卖方：the sellers：双方同意按下列条款由买方售出下列商品：the buyers agree to buy and the sellers agree to sell the following goods on terms and conditions as set forth below：(1)商品名称、规格及包装(1)name of commodity ,specifications and packing (2)数量(2)quantity(3)单价(3)unit price (4)总值(4)total value(装运数量允许有%的增减)(shipment quantity %more or less allowed)(5)装运期限：(5)time of shipment：(6)装运口岸：(6)port of loading：(7)目的口岸：(7)port of destination：(8)保险;由方负责，按本合同总值110%投保_____险。

(8)insurance：to be covered by the___for 110% of the invoice value against_______.(9)付款：凭保兑的、不可撤销的、可转让的、可分割的即期有电报套汇条款/见票/出票____天期付款信用证，信用证以_____为受益人并允许分批装运和转船。

该信用证必须在______前开到卖方，信用证的有效期应为上述装船期后第15天，在中国______到期，否则卖方有权取消本售货合约，不另行通知，并保留因此而发生的一切损失的索赔权。

(9)terms of payment：by confirmed, irrevocable, transferable and divisible letter of credit in favour of _____payable at sight with tt reimbursement clause/___days’/sight/date allowing partial shipment and transshipment. the covering letter of credit must reach the sellers before _____and is to remain valid in _____.china until the 15th day after the aforesaid time of shipment, failing which the sellers reserve the right to cancel this sales contract without further notice and to claim from the buyers for losses resulting therefrom.(10)商品检验：以中国________所签发的品质/数量/重量/包装/卫生检验合格证书作为卖方的交货依据。

(10)inspection：the inspection certificate of quality / quantity / weight / packing / sanitation issued by_______of china shall be regarded as evidence of the sellers’delivery.(11)装运唛头：(11)shipping marks：其他条款：other terms： 1. 异议：品质异议须于货到目的口岸之日起30天内提出，数量异议须于货到目的口岸之日起15天内提出，但均须提供经卖方同意的公证行的检验证明。

如责任属于卖方者，卖方于收到异议20天内答复买方并提出处理意见。

1. discrepancy：in case of quality discrepancy, claim should be lodged by the buyers within 30 days after the arrival of the goods at the port of destination, while for quantity discrepancy, claim should be lodged by the buyers within 15 days after the arrival of the goods at the port of destination. in all cases, claims must be accompanied by survey reports of recognized public surveyors agreed to by the sellers. should the responsibility of the subject under claim be found to rest on the part of the sellers, the sellers shall, within 20 days after receipt of the claim, send their reply to the buyers together with suggestion for settlement. 2. 信用证内应明确规定卖方有权可多装或少装所注明的百分数，并按实际装运数量议付。

(信用证之金额按本售货合约金额增加相应的百分数。

) 2. the covering letter of credit shall stipulate the sellers’s option of shipping the indicated percentage more or less than the quantity hereby contracted and be negotiated for the amount covering the value of quantity actually shipped. (the buyers are requested to establish the l/c in amount with the indicated percentage over the total value of the order as per this sales contract.) 3. 信用证内容须严格符合本售货合约的规定，否则修改信用证的费用由买方负担，卖方并不负因修改信用证而延误装运的责任，并保留因此而发生的一切损失的索赔权。

3. the contents of the covering letter of credit shall be in strict conformity with the stipulations of the sales contract. in case of any variation there of necessitating amendment of the l/c, the buyers shall bear the expenses for effecting the amendment. the sellers shall not be held responsible for possible delay of shipmentresulting from awaiting the amendment of the l/c and reserve the right to claim from the buyers for the losses resulting therefrom. 4. 除经约定保险归买方投保者外，由卖方向中国的保险公司投保。

如买方需增加保险额及/或需加保其他险，可于装船前提出，经卖方同意后代为投保，其费用由买方负担。

4. except in cases where the insurance is covered by the buyers as arranged, insurance is to be covered by the sellers with a chinese insurance company. if insurance for additional amount and /or for other insurance terms is required by the buyers, prior notice to this effect must reach the sellers before shipment and is subject to the sellers’agreement, and the extra insurance premium shall be for the buyers’account. 5. 因人力不可抗拒事故使卖方不能在本售货合约规定期限内交货或不能交货，卖方不负责任，但是卖方必须立即以电报通知买方。

如果买方提出要求，卖方应以挂号函向买方提供由中国国际贸易促进委员会或有关机构出具的证明，证明事故的存在。

买方不能领到进口许可证，不能被认为系属人力不可抗拒范围。

5. the sellers shall not be held responsible if they fail, owing to force majeure cause or causes, to make delivery within the time stipulated in this sales contract or cannot deliver the goods. however, the sellers shall inform immediately the buyers by cable. the sellers shall deliver to the buyers by registered letter, if it is requested by the buyers, a certificate issued by the china council for the promotion of international trade or by any competent authorities, attesting the existence of the said cause or causes. the buyers’failure to obtain the relative import licence is not to be treated as force majeure. 6. 仲裁：凡因执行本合约或有关本合约所发生的一切争执，双方应以友好方式协商解决;如果协商不能解决，应提交中国国际经济贸易仲裁委员会，根据该会的仲裁规则进行仲裁。