Typical
applications
Blocking
Coupling,
decoupling
Bypassing
RFI for automotive
Climatic
Max.operating temperature:125°
C
Climatic category(IEC60068-1):55/125/56
Construction
Dielectric:polyethylene terephthalate
(polyester,
PET)
Stacked-film technology for lead spacing
5to15mm
=code D or C in digit7of ordering
code
Wound capacitor technology for lead
spacing10to27.5mm
=code N,Q or T in digit7of ordering
code
Plastic case(UL94
V-0)
Epoxy resin sealing(UL94V-0)
Features
High pulse
strength
High contact reliability
Terminals
Parallel wire leads,lead-free
tinned
Special lead lengths available on request
Marking
Manufacturer's logo,
rated capacitance(coded),cap.tolerance(code letter),
rated DC voltage,date of manufacture(coded),
coded type("1")for lead spacing5mm,
series and lot number for lead spacing≥10mm
Delivery mode
Bulk(untaped)
T aped(Ammo pack or reel)
For notes on taping,refer to chapter"Taping and packing“.
Dimensional
drawing
Dimensions in mm
Overview of available types
Technology:s =Stacked-film technology /w =Wound capacitor technology
Overview of available types
T echnology:s =Stacked-film technology /w =Wound capacitor technology
Ordering codes and packing units(lead spacing5mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.dimensions
w
×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
50320.33 3.0× 6.5×7.2B32529C5334+***270024002000
0.47 3.5×8.0×7.2B32529C5474+***230020002000
0.68 4.5×9.5×7.3B32529C5684+***180015001500
1.0 4.5×9.5×7.3B32529C5105+***180015001500
1.5 6.0×10.5×7.5B32529C5155+***130011001000
2.27.8×1
3.0×7.8B32529D5225+***10008001000
3.37.8×13.0×7.8B32529D5335+***10008001000 63400.0010 2.5× 6.5×7.2B32529C0102+***320028002000
0.0015 2.5× 6.5×7.2B32529C0152+***320028002000
0.0022 2.5× 6.5×7.2B32529C0222+***320028002000
0.0033 2.5× 6.5×7.2B32529C0332+***320028002000
0.0047 2.5× 6.5×7.2B32529C0472+***320028002000
0.0068 2.5× 6.5×7.2B32529C0682+***320028002000
0.010 2.5× 6.5×7.2B32529C0103+***320028002000
0.015 2.5× 6.5×7.2B32529C0153+***320028002000
0.022 2.5× 6.5×7.2B32529C0223+***320028002000
0.033 2.5× 6.5×7.2B32529C0333+***320028002000
0.047 2.5× 6.5×7.2B32529C0473+***320028002000
0.068 2.5× 6.5×7.2B32529C0683+***320028002000
0.10 2.5× 6.5×7.2B32529C0104+***320028002000
0.15 2.5× 6.5×7.2B32529C0154+***320028002000
0.22 2.5× 6.5×7.2B32529C0224+***320028002000
0.33 3.0× 6.5×7.2B32529C0334+***270024002000
0.47 3.5×8.0×7.2B32529C0474+***230020002000
0.68 4.5×9.5×7.3B32529C0684+***180015001500
1.0 4.5×9.5×7.3B32529C0105+***180015001500
1.5 6.0×10.5×7.5B32529C0155+***130011001000
2.27.8×1
3.0×7.8B32529D0225+***10008001000
Ordering codes and packing units (lead spacing 5mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.dimensions w
×h ×l mm
Ordering code (composition see below)
Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
10063
0.0010 2.5× 6.5×7.2B32529C1102+***3200280020000.0015 2.5× 6.5×7.2B32529C1152+***3200280020000.0022 2.5× 6.5×7.2B32529C1222+***3200280020000.0033 2.5× 6.5×7.2B32529C1332+***3200280020000.0047 2.5× 6.5×7.2B32529C1472+***3200280020000.0068 2.5× 6.5×7.2B32529C1682+***3200280020000.010 2.5× 6.5×7.2B32529C1103+***3200280020000.015 2.5× 6.5×7.2B32529C1153+***3200280020000.022 2.5× 6.5×7.2B32529C1223+***3200280020000.033 2.5× 6.5×7.2B32529C1333+***3200280020000.047 2.5× 6.5×7.2B32529C1473+***3200280020000.068 2.5× 6.5×7.2B32529C1683+***3200280020000.10 2.5× 6.5×7.2B32529C1104+***3200280020000.15 3.0× 6.5×7.2B32529C1154+***2700240020000.22 3.5×8.0×7.2B32529C1224+***2300200020000.33 3.5×8.0×7.2B32529C1334+***2300200020000.47 4.5×9.5×7.3B32529C1474+***1800150015000.68 6.0×10.5×7.5B32529C1684+***1300110010001.0
7.8×13.0×7.8
B32529D1105+***
1000
800
1000
Ordering codes and packing units(lead spacing5mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.
dimensions
w
×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
2501600.0010 2.5× 6.5×7.2B32529C3102+***320028002000
0.0015 2.5× 6.5×7.2B32529C3152+***320028002000
0.0022 2.5× 6.5×7.2B32529C3222+***320028002000
0.0033 2.5× 6.5×7.2B32529C3332+***320028002000
0.0047 2.5× 6.5×7.2B32529C3472+***320028002000
0.0068 2.5× 6.5×7.2B32529C3682+***320028002000
0.010 2.5× 6.5×7.2B32529C3103+***320028002000
0.015 2.5× 6.5×7.2B32529C3153+***320028002000
0.022 2.5× 6.5×7.2B32529C3223+***320028002000
0.033 3.0× 6.5×7.2B32529C3333+***270024002000
0.047 3.5×8.0×7.2B32529C3473+***230020002000
0.068 4.5×9.5×7.3B32529C3683+***180015001500
0.10 4.5×9.5×7.3B32529C3104+***180015001500
0.15 5.0×10.0×7.5B32529C3154+***160014001500
0.227.8×13.0×7.8B32529D3224+***10008001000
0.337.8×13.0×7.8B32529C3334+***10008001000
0.477.8×13.0×7.8B32529C3474+***10008001000 4002000.0010 2.5× 6.5×7.2B32529C6102+***320028002000
0.0015 2.5× 6.5×7.2B32529C6152+***320028002000
0.0022 2.5× 6.5×7.2B32529C6222+***320028002000
0.0033 2.5× 6.5×7.2B32529C6332+***320028002000
0.0047 2.5× 6.5×7.2B32529C6472+***320028002000
0.0068 2.5× 6.5×7.2B32529C6682+***320028002000
0.010 3.0× 6.5×7.2B32529C6103+***270024002000
0.015 3.5×8.0×7.2B32529C6153+***230020002000
0.022 4.5×9.5×7.3B32529C6223+***180015001500
0.033 5.0×10.0×7.5B32529C6333+***160014001500
0.047 6.0×10.5×7.5B32529C6473+***130011001000
0.0687.8×13.0×7.8B32529D6683+***10008001000
0.107.8×13.0×7.8B32529D6104+***10008001000
Ordering codes and packing units (lead spacing 5mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.dimensions w
×h ×l mm
Ordering code (composition see below)
Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
630400
0.0010 2.5× 6.5×7.2B32529C8102+***3200280020000.0015 2.5× 6.5×7.2B32529C8152+***3200280020000.0022 2.5× 6.5×7.2B32529C8222+***3200280020000.0033 3.5×8.0×7.2B32529C8332+***2300200020000.0047 3.5×8.0×7.2B32529C8472+***2300200020000.0068 3.5×8.0×7.2B32529C8682+***2300200020000.010
5.0×10.0×7.5
B32529C8103+***
1600
1400
1500
Ordering codes and packing units(lead spacing7.5mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.
dimensions
w×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
63400.068 2.5×7.0×10.0B32520C0683+***320028002500
0.10 2.5×7.0×10.0B32520C0104+***320028002500
0.15 2.5×7.0×10.0B32520C0154+***320028002500
0.22 2.5×7.0×10.0B32520C0224+***320028002500
0.33 2.5×7.0×10.0B32520C0334+***320028002500
0.47 3.0×8.0×10.0B32520C0474+***260024002000
0.68 4.0×8.5×10.0B32520C0684+***200018001500
1.0 5.0×10.5×10.0B32520C0105+***160014001000
1.5 5.0×10.5×10.0B32520C0155+***160014001000
2.2 6.0×12.0×10.3B32520C0225+***130******** 100630.047 2.5×7.0×10.0B32520C1473+***320028002500
0.068 2.5×7.0×10.0B32520C1683+***320028002500
0.10 2.5×7.0×10.0B32520C1104+***320028002500
0.15 3.0×8.0×10.0B32520C1154+***260024002000
0.22 3.0×8.0×10.0B32520C1224+***260024002000
0.33 4.0×8.5×10.0B32520C1334+***200018001500
0.47 5.0×10.5×10.0B32520C1474+***160014001000
0.68 6.0×12.0×10.3B32520C1684+***130********
1.0 6.0×1
2.0×10.3B32520C1105+***130******** 2501600.015 2.5×7.0×10.0B32520C3153+***320028002500
0.022 2.5×7.0×10.0B32520C3223+***320028002500
0.033 2.5×7.0×10.0B32520C3333+***320028002500
0.047 2.5×7.0×10.0B32520C3473+***320028002500
0.068 3.0×8.0×10.0B32520C3683+***260024002000
0.10 4.0×8.5×10.0B32520C3104+***200018001500
0.15 5.0×10.5×10.0B32520C3154+***160014001000
0.22 6.0×12.0×10.3B32520C3224+***130********
Ordering codes and packing units (lead spacing 7.5mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.
dimensions
w ×h ×l mm
Ordering code (composition see below)
Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
400200
0.0010 2.5×7.0×10.0B32520C6102+***3200280025000.0015 2.5×7.0×10.0B32520C6152+***3200280025000.0022 2.5×7.0×10.0B32520C6222+***3200280025000.0033 2.5×7.0×10.0B32520C6332+***3200280025000.0047 2.5×7.0×10.0B32520C6472+***3200280025000.0068 2.5×7.0×10.0B32520C6682+***3200280025000.010 2.5×7.0×10.0B32520C6103+***3200280025000.015 3.0×8.0×10.0B32520C6153+***2600240020000.022 4.0×8.5×10.0B32520C6223+***2000180015000.033 5.0×10.5×10.0B32520C6333+***1600140010000.047 5.0×10.5×10.0B32520C6473+***1600140010000.068
6.0×12.0×10.3
B32520C6683+***
1300
1100
750
Ordering codes and packing units(lead spacing10mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.dimensions
w×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
?Wound capacitor technology
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
63400.47 4.0×7.0×13.0B32521C0474+***100017001000
0.68 4.0×7.0×13.0B32521C0684+***100017001000
1.0 4.0×9.0×13.0B32521C0105+***100017001000
1.5 5.0×11.0×13.0B32521C0155+***83013001000
2.2 5.0×11.0×1
3.0B32521C0225+***83013001000
3.3 6.0×12.0×13.0B32521C0335+***68011001000 100630.10
4.0×7.0×13.0B32521C1104+***100017001000
0.15 4.0×7.0×13.0B32521C1154+***100017001000
0.22 4.0×7.0×13.0B32521C1224+***100017001000
0.33 4.0×7.0×13.0B32521C1334+***100017001000
0.47 4.0×9.0×13.0B32521C1474+***100017001000
0.68 5.0×11.0×13.0B32521C1684+***83013001000
1.0 6.0×1
2.0×1
3.0B32521C1105+***68011001000 2501600.033
4.0×7.0×13.0B32521C3333+***100017001000
0.047 4.0×7.0×13.0B32521C3473+***100017001000
0.068 4.0×7.0×13.0B32521C3683+***100017001000
0.10 4.0×7.0×13.0B32521C3104+***100017001000
0.15 4.0×9.0×13.0B32521C3154+***100017001000
0.22 5.0×11.0×13.0B32521C3224+***83013001000
0.33 5.0×11.0×13.0B32521C3334+***83013001000
0.47 6.0×12.0×13.0B32521C3474+***68011001000 4002000.010 4.0×7.0×13.0B32521C6103+***100017001000
0.015 4.0×7.0×13.0B32521C6153+***100017001000
0.022 4.0×7.0×13.0B32521C6223+***100017001000
0.033 4.0×9.0×13.0B32521C6333+***100017001000
0.047 5.0×11.0×13.0B32521C6473+***83013001000
0.068 5.0×11.0×13.0B32521C6683+***83013001000
0.10 6.0×12.0×13.0B32521C6104+***68011001000
Ordering codes and packing units (lead spacing 10mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.dimensions
w ×h ×l mm
Ordering code (composition see below)
Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ?Wound capacitor technology
Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
630200
0.0068? 4.0×9.0×13.0B32521N8682+***1000170010000.010? 4.0×9.0×13.0B32521N8103+***1000170010000.015? 5.0×11.0×13.0B32521N8153+***830130010000.022? 5.0×11.0×13.0B32521N8223+***830130010000.033
?
6.0×12.0×13.0
B32521N8333+***
680
1100
1000
Ordering codes and packing units(lead spacing15mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.
dimensions
w
×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
?Wound capacitor technology
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
63400.68 5.0×10.5×18.0B32522C0684+***117013001000
1.0 5.0×10.5×18.0B32522C0105+***117013001000
1.5 5.0×10.5×18.0B32522C0155+***117013001000
2.2 5.0×10.5×18.0B32522C0225+***117013001000
3.3 6.0×11.0×18.0B32522C0335+***96011001000
4.77.0×12.5×18.0B32522C0475+***8309001000
6.88.5×14.5×18.0B32522C0685+***680700500
109.0×17.5×18.0B32522C0106+***640700500 100630.33 5.0×10.5×18.0B32522C1334+***117013001000
0.47 5.0×10.5×18.0B32522C1474+***117013001000
0.68 5.0×10.5×18.0B32522C1684+***117013001000
1.0 5.0×10.5×18.0B32522C1105+***117013001000
1.0? 6.0×11.0×18.0B32522Q1105+***96011001000
1.5 6.0×11.0×18.0B32522C1155+***96011001000
1.5?7.0×1
2.5×18.0B32522Q1155+***8309001000
2.27.0×12.5×18.0B32522C1225+***8309001000
2.2?8.5×14.5×18.0B32522Q1225+***680700500
3.38.5×1
4.5×18.0B32522C1335+***680700500
3.3?9.0×17.5×18.0B32522Q1335+***640700500
4.79.0×17.5×18.0B32522C1475+***640700500
4.7?11.0×18.5×18.0B32522Q1475+*** 550300 2501600.10
5.0×10.5×18.0B32522C3104+***117013001000
0.15 5.0×10.5×18.0B32522C3154+***117013001000
0.22 5.0×10.5×18.0B32522C3224+***117013001000
0.33 5.0×10.5×18.0B32522C3334+***117013001000
0.47 6.0×11.0×18.0B32522C3474+***96011001000
0.687.0×12.5×18.0B32522C3684+***8309001000
1.08.5×14.5×18.0B32522C3105+***680700500
1.0?8.5×14.5×18.0B32522N3105+***680700500
1.59.0×17.5×18.0B32522C3155+***640700500
1.5?9.0×17.5×18.0B32522N3155+***640700500
Ordering codes and packing units (lead spacing 15mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.
dimensions w
×h ×l mm
Ordering code (composition see below)
Ammo pack pcs./unit Reel pcs./unit Untaped pcs./unit ?Wound capacitor technology
Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
400200
0.047 5.0×10.5×18.0B32522C6473+***1170130010000.068 5.0×10.5×18.0B32522C6683+***1170130010000.10 5.0×10.5×18.0B32522C6104+***1170130010000.15 6.0×11.0×18.0B32522C6154+***960110010000.227.0×12.5×18.0B32522C6224+***83090010000.338.5×14.5×18.0B32522C6334+***680700500450200
0.10? 5.0×10.5×18.0B32522N6104+***1170130010000.15? 5.0×10.5×18.0B32522N6154+***1170130010000.22? 6.0×11.0×18.0B32522N6224+***960110010000.33?7.0×12.5×18.0B32522N6334+***83090010000.47?8.5×14.5×18.0B32522N6474+***6807005000.47?8.0×14.0×18.0B32522T6474+*** 7505000.68?9.0×17.5×18.0B32522N6684+***6407005000.68?13.0×14.0×18.0B32522T6684+*** 5003001.0?11.0×18.5×18.0B32522N6105+*** 550300630200
0.033? 5.0×10.5×18.0B32522Q8333+***1170130010000.047? 5.0×10.5×18.0B32522Q8473+***1170130010000.068? 6.0×11.0×18.0B32522Q8683+***960110010000.10?7.0×12.5×18.0B32522Q8104+***83090010000.15?8.5×14.5×18.0B32522Q8154+***6807005000.15?8.0×14.0×18.0B32522T8154+*** 7505000.22?9.0×17.5×18.0B32522Q8224+***6407005000.33
?
11.0×18.5×18.0
B32522Q8334+***
550
300
Ordering codes and packing units(lead spacing22.5mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.dimensions
w×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
6340 3.3 6.0×15.0×26.5B32523Q0335+***680700720
4.77.0×16.0×26.5B32523Q0475+***580600630
6.88.5×16.5×26.5B32523Q0685+***480500510
1010.5×18.5×26.5B32523Q0106+***390400540
1512.0×22.0×26.5B32523Q0156+*** 450 10063 1.5 6.0×15.0×26.5B32523Q1155+***680700720
2.2 6.0×15.0×26.5B32523Q1225+***680700720
3.3 6.0×15.0×26.5B32523Q1335+***680700720
4.77.0×16.0×26.5B32523Q1475+***580600630
6.88.5×16.5×26.5B32523Q1685+***480500510
1010.5×18.5×26.5B32523Q1106+***390400540
1512.0×22.0×26.5B32523Q1156+*** 450 2501600.47 6.0×15.0×26.5B32523Q3474+***680700720
0.68 6.0×15.0×26.5B32523Q3684+***680700720
1.0 6.0×15.0×26.5B32523Q3105+***680700720
1.57.0×16.0×26.5B32523Q3155+***580600630
2.210.5×16.5×26.5B32523Q3225+***390400540
3.311.0×20.5×26.5B32523Q3335+***370350510 4002000.22 6.0×15.0×26.5B32523Q6224+***680700720
0.33 6.0×15.0×26.5B32523Q6334+***680700720
0.477.0×16.0×26.5B32523Q6474+***580600630
0.688.5×16.5×26.5B32523Q6684+***480500510
1.010.5×16.5×26.5B32523Q6105+***390400540
1.511.0×20.5×26.5B32523Q6155+***370350510 6302000.10 6.0×15.0×26.5B32523Q8104+***680700720
0.15 6.0×15.0×26.5B32523Q8154+***680700720
0.227.0×16.0×26.5B32523Q8224+***580600630
0.3310.5×16.5×26.5B32523Q8334+***390400540
0.4710.5×20.5×26.5B32523Q8474+***390400540
0.6812.0×22.0×26.5B32523Q8684+*** 450
Ordering codes and packing units (lead spacing 27.5mm)V R
VDC V rms f ≤60Hz VAC C R μF
Max.
dimensions w
×h ×l mm
Ordering code (composition see below)
Ammo pack
pcs./unit Reel pcs./unit Untaped pcs./unit Further E series and intermediate capacitance values on request.
Composition of ordering code +=Capacitance tolerance code:
***=Packaging code:
M =±20%K =±10%J =±5%
289=Ammo pack 189=Reel
000=Untaped (lead length 6 1mm)
6340
4.711.0×21.0×31.5B32524Q0475+*** 3503206.811.0×21.0×31.5B32524Q0685+*** 3503201011.0×21.0×31.5B32524Q0106+*** 3503201511.0×21.0×31.5B32524Q0156+*** 3002802214.0×24.5×31.5B32524Q0226+*** 3503203318.0×27.5×31.5B32524Q0336+*** 2004721.0×31.0×31.5B32524Q0476+*** 1806822.0×36.5×31.5B32524Q0686+*** 16010063
4.711.0×21.0×31.5B32524Q1475+*** 3503206.811.0×21.0×31.5B32524Q1685+*** 3503201011.0×21.0×31.5B32524Q1106+*** 3503201511.0×21.0×31.5B32524Q1156+*** 3002802214.0×24.5×31.5B32524Q1226+*** 3503203318.0×27.5×31.5B32524Q1336+*** 2004721.0×31.0×31.5B32524Q1476+*** 1806822.0×36.5×31.5B32524Q1686+*** 160250160
1.511.0×21.0×31.5B32524Q3155+*** 350320
2.211.0×21.0×31.5B32524Q3225+*** 350320
3.311.0×21.0×31.5B32524Q3335+*** 350320
4.711.0×21.0×31.5B32524Q3475+*** 3503206.814.0×24.5×31.5B32524Q3685+*** 2502601018.0×27.5×31.5B32524Q3106+*** 2001519.0×30.0×31.5B32524Q3156+*** 180400200
0.6811.0×19.0×31.5B32524Q6684+*** 3503201.011.0×19.0×31.5B32524Q6105+*** 3503201.511.0×19.0×31.5B32524Q6155+*** 3503202.212.5×21.5×31.5B32524Q6225+*** 3002803.315.0×24.5×31.5B32524Q6335+*** 2404.718.0×27.5×31.5B32524Q6475+*** 2006.8
21.0×31.0×31.5
B32524Q6685+***
180
Ordering codes and packing units(lead spacing27.5mm)
V R VDC V rms
f≤60Hz
VAC
C R
μF
Max.
dimensions
w×h×l mm Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+=Capacitance tolerance code:***=Packaging code:
M=±20% K=±10% J=±5%289=Ammo pack
189=Reel
000=Untaped(lead length6 1mm)
6302200.3311.0×21.0×31.5B32524Q8334+*** 350320
0.4711.0×21.0×31.5B32524Q8474+*** 350320
0.6811.0×21.0×31.5B32524Q8684+*** 350320
1.014.0×24.5×31.5B32524Q8105+*** 250260
1.518.0×27.5×31.5B32524Q8155+*** 200
2.221.0×31.0×31.5B32524Q8225+*** 180
Technical data
Operating temperature range
Max.operating temperature T op,max +125°C Upper category temperature T max +125°C Lower
category temperature T
min 55°C Rated temperature T R
+85°C
Dissipation factor tan δ(in 10-3)at C R ≤0.1μF
0.1μF C R >1μF at 20°C 1kHz 8810(upper limit values) 10kHz 1515 100kHz 30 Insulation resistance R ins V R C R ≤0.33μF C R >0.33μF or time constant τ=C R R ins ≤100VDC 3750M ?1250s at 20°C,rel.humidity ≤65%≥250VDC 7500M ? 2500s (minimum as-delivered values)DC test voltage 1.4 V R ,2s Category voltage V C T A (°C)DC voltage derating AC voltage derating (continuous operation with V DC T A ≤85V C =V R V C,rms =V rms or V AC at f ≤60Hz) 85 56days/40°C/93%relative humidity Limit values after damp Capacitance change ?C/C ≤5% heat test Dissipation factor change ?tan δ≤5 10-3(at 1kHz)Insulation resistance R ins ≥50%of minimum or time constant τ=C R R ins as-delivered values Reliability:Failure rate λ1fit (≤1 10-9/h)at 0.5 V R ,40°C Service life t SL 200000h at 1.0 V R ,40°C For conversion to other operating conditions and temperatures,refer to chapter "Quality assurance",page .Failure criteria:T otal failure Short circuit or open circuit Failure due to variation Capacitance change ?C/C >10% of parameters Dissipation factor tan δ>2 upper limit value Insulation resistance R ins <150M ?(C R ≤0.33μF)or time constant τ=C R R ins <50s (C R >0.33μF) Pulse handling capability "dV/dt"represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages,expressed in V/μs. "k 0"represents the maximum permissible pulse characteristic of the waveform applied to the capacitor,expressed in V 2/μs. Note: The values of dV/dt and k 0provided below must not be exceeded in order to avoid damaging the capacitor.dV/dt values Lead spacing 5mm 7.5mm 10mm 15mm 22.5mm 27.5mm Technology Stacked Stacked Stacked Wound Stacked Wound Wound Wound V R V rms VDC VAC dV/dt in V/μs 5032200 634025012050 30 311006330015075 50543250160400200150 100106 4.5400200600275175 125 107.5450200 20 630 400 800 20 2515 12 k 0values Lead spacing 5mm 7.5mm 10mm 15 mm 22.5mm 27.5mm Technology Stacked Stacked Stacked Wound Stacked Wound Wound Wound V R V rms VDC VAC k 0in V 2/μs 5032 20000 6340 30000150006300 3800 37513010063 600003000015000 10000850750600250160 20000010000075000 5000050003000 2250400200 500000220000 140000 100000 80006000 450200 15000 6304001000000 25000 300001800015000 Impedance Z versus frequency f (typical values)
相关主题
文本预览