U盘升级方法2014.4.8

copy usba0:/main.bin main.bin
Copy usba0:/main.bin to flash:/main.bin?[Y/N]:y
The file flash:/main.bin exists. Overwrite it?[Y/N]:y
...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
%Copy file usba0:/main.bin to flash:/main.bin...Done.
dir
Directory of flash:/

0 -rw- 26337280 Jan 01 2007 01:13:08 main.bin
1 -rw- 16256 Jan 01 2007 00:01:26 p2p_default.mtd

31369 KB total (5631 KB free)

save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait....................
Configuration is saved to device successfully.
dir
Directory of flash:/

0 -rw- 26337280 Jan 01 2007 01:13:08 main.bin
1 -rw- 16256 Jan 01 2007 00:01:26 p2p_default.mtd
2 -rw- 1289 Jan 01 2007 01:14:46 startup.cfg
3 -rw- 3465 Jan 01 2007 01:14:41 system.xml

31369 KB total (5624 KB free)

boot-loader file flash:/main.bin main
This command will set the boot file. Continue? [Y/N]:y


copy usba0:/startup.cfg startup.cfg
Copy usba0:/startup.cfg to flash:/startup.cfg?[Y/N]:y
The file flash:/startup.cfg exists. Overwrite it?[Y/N]:y
......
%Copy file usba0:/startup.cfg to flash:/startup.cfg...Done.