一、综合词汇
1、印制电路:printed circuit
2、印制线路:printed wiring
3、印制板:printed board
4、印制板电路:printed circuit board (pcb)
5、印制线路板:printed wiring board(pwb)
6、印制元件:printed component
7、印制接点:printed contact
8、印制板装配:printed board assembly
9、板:board
10、单面印制板:single-sided printed board(ssb)
11、双面印制板:double-sided printed board(dsb)
12、多层印制板:mulitlayer printed board(mlb)
13、多层印制电路板:mulitlayer printed circuit board
14、多层印制线路板:mulitlayer prited wiring board
15、刚性印制板:rigid printed board
16、刚性单面印制板:rigid single-sided printed borad
17、刚性双面印制板:rigid double-sided printed borad
18、刚性多层印制板:rigid multilayer printed board
19、挠性多层印制板:flexible multilayer printed board
20、挠性印制板:flexible printed board
21、挠性单面印制板:flexible single-sided printed board
22、挠性双面印制板:flexible double-sided printed board
23、挠性印制电路:flexible printed circuit (fpc)
24、挠性印制线路:flexible printed wiring
25、刚性印制板:flex-rigid printed board, rigid-flex printed board
26、刚性双面印制板:flex-rigid double-sided printed board, rigid-flex double-sided printed
27、刚性多层印制板:flex-rigid multilayer printed board, rigid-flex multilayer printed board
28、齐平印制板:flush printed board
29、金属芯印制板:metal core printed board
30、金属基印制板:metal base printed board
31、多重布线印制板:mulit-wiring printed board
32、陶瓷印制板:ceramic substrate printed board
33、导电胶印制板:electroconductive paste printed board
34、模塑电路板:molded circuit board
35、模压印制板:stamped printed wiring board
36、顺序层压多层印制板:sequentially-laminated mulitlayer
37、散线印制板:discrete wiring board
38、微线印制板:micro wire board
39、积层印制板:buile-up printed board
40、积层多层印制板:build-up mulitlayer printed board (bum)
41、积层挠印制板:build-up flexible printed board
42、表面层合电路板:surface laminar circuit (slc)
43、埋入凸块连印制板:b2it printed board
44、多层膜基板:multi-layered film substrate(mfs)
45、层间全内导通多层印制板:alivh multilayer printed board
46、载芯片板:chip on board (cob)
47、埋电阻板:buried resistance board
48、母板:mother board
49、子板:daughter board
50、背板:backplane
51、裸板:bare board
52、键盘板夹心板:copper-invar-copper board
53、动态挠性板:dynamic flex board
54、静态挠性板:static flex board
55、可断拼板:break-away planel
56、电缆:cable
57、挠性扁平电缆:flexible flat cable (ffc)
58、薄膜开关:membrane switch
59、混合电路:hybrid circuit
60、厚膜:thick film
61、厚膜电路:thick film circuit
62、薄膜:thin film
63、薄膜混合电路:thin film hybrid circuit
64、互连:interconnection
65、导线:conductor trace line
66、齐平导线:flush conductor
67、传输线:transmission line
68、跨交:crossover
69、板边插头:edge-board contact
70、增强板:stiffener
71、基底:substrate
72、基板面:real estate
73、导线面:conductor side
74、元件面:component side
75、焊接面:solder side
76、印制:printing
77、网格:grid
78、图形:pattern
79、导电图形:conductive pattern
80、非导电图形:non-conductive pattern
81、字符:legend
82、标志:mark
二、基材:
1、基材:base material
2、层压板:laminate
3、覆金属箔基材:metal-clad bade material
4、覆铜箔层压板:copper-clad laminate (ccl)
5、单面覆铜箔层压板:single-sided copper-clad laminate
6、双面覆铜箔层压板:double-sided copper-clad laminate
7、复合层压板:composite laminate
8、薄层压板:thin laminate
9、金属芯覆铜箔层压板:metal core copper-clad laminate
10、金属基覆铜层压板:metal base copper-clad laminate
11、挠性覆铜箔绝缘薄膜:flexible copper-clad dielectric film
12、基体材料:basis material
13、预浸材料:prepreg
14、粘结片:bonding sheet
15、预浸粘结片:preimpregnated bonding sheer
16、环氧玻璃基板:epoxy glass substrate
17、加成法用层压板:laminate for additive process
18、预制内层覆箔板:mass lamination panel
19、内层芯板:core material
20、催化板材:catalyzed board ,coated catalyzed laminate
21、涂胶催化层压板:adhesive-coated catalyzed laminate
22、涂胶无催层压板:adhesive-coated uncatalyzed laminate
23、粘结层:bonding layer
24、粘结膜:film adhesive
25、涂胶粘剂绝缘薄膜:adhesive coated dielectric film
26、无支撑胶粘剂膜:unsupported adhesive film
27、覆盖层:cover layer (cover lay)
28、增强板材:stiffener material
29、铜箔面:copper-clad surface
30、去铜箔面:foil removal surface
31、层压板面:unclad laminate surface
32、基膜面:base film surface
33、胶粘剂面:adhesive faec
34、原始光洁面:plate finish
35、粗面:matt finish
36、纵向:length wise direction
37、模向:cross wise direction
38、剪切板:cut to size panel
39、酚醛纸质覆铜箔板:phenolic cellulose paper copper-clad laminates(phenolic/paper ccl)
40、环氧纸质覆铜箔板:epoxide cellulose paper copper-clad laminates (epoxy/paper ccl)
41、环氧玻璃布基覆铜箔板:epoxide woven glass fabric copper-clad laminates
42、环氧玻璃布纸复合覆铜箔板:epoxide cellulose paper core, glass cloth surfaces copper-clad laminates
43、环氧玻璃布玻璃纤维复合覆铜箔板:epoxide non woven/woven glass reinforced copper-clad laminates
44、聚酯玻璃布覆铜箔板:ployester woven glass fabric copper-clad laminates
45、聚酰亚胺玻璃布覆铜箔板:polyimide woven glass fabric copper-clad laminates
46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板:bismaleimide/triazine/epoxide woven glass fabric copper-clad lamim ates
47、环氧合成纤维布覆铜箔板:epoxide synthetic fiber fabric copper-clad laminates
48、聚四乙烯玻璃纤维覆铜箔板:teflon/fiber glass copper-clad laminates
49、超薄型层压板:ultra thin laminate
50、陶瓷基覆铜箔板:ceramics base copper-clad laminates
51、紫外线阻挡型覆铜箔板:uv blocking copper-clad laminates
三、基材的材料
1、 a阶树脂:a-stage resin
2、 b阶树脂:b-stage resin
3、 c阶树脂:c-stage resin
4、环氧树脂:epoxy resin
5、酚醛树脂:phenolic resin
6、聚酯树脂:polyester resin
7、聚酰亚胺树脂:polyimide resin
8、双马来酰亚胺三嗪树脂:bismaleimide-triazine resin
9、丙烯酸树脂:acrylic resin
10、三聚氰胺甲醛树脂:melamine formaldehyde resin
11、多官能环氧树脂:polyfunctional epoxy resin
12、溴化环氧树脂:brominated epoxy resin
13、环氧酚醛:epoxy novolac
14、氟树脂:fluroresin
15、硅树脂:silicone resin
16、硅烷:silane
17、聚合物:polymer
18、无定形聚合物:amorphous polymer
19、结晶现象:crystalline polamer
20、双晶现象:dimorphism
21、共聚物:copolymer
22、合成树脂:synthetic
23、热固性树脂:thermosetting resin
24、热塑性树脂:thermoplastic resin
25、感光性树脂:photosensitive resin
26、环氧当量:weight per epoxy equivalent (wpe)
27、环氧值:epoxy value
28、双氰胺:dicyandiamide
29、粘结剂:binder
30、胶粘剂:adesive
31、固化剂:curing agent
32、阻燃剂:flame retardant
33、遮光剂:opaquer
34、增塑剂:plasticizers
35、不饱和聚酯:unsatuiated polyester
36、聚酯薄膜:polyester
37、聚酰亚胺薄膜:polyimide film (pi)
38、聚四氟乙烯:polytetrafluoetylene (ptfe)
39、聚全氟乙烯丙烯薄膜:perfluorinated ethylene-propylene copolymer film (fep)
40、增强材料:reinforcing material
41、玻璃纤维:glass fiber
42、 e玻璃纤维:e-glass fibre
43、 d玻璃纤维:d-glass fibre
44、 s玻璃纤维:s-glass fibre
45、玻璃布:glass fabric
46、非织布:non-woven fabric
47、玻璃纤维垫:glass mats
48、纱线:yarn
49、单丝:filament
50、绞股:strand
51、纬纱:weft yarn
52、经纱:warp yarn
53、但尼尔:denier
54、经向:warp-wise
55、纬向:weft-wise, filling-wise
56、织物经纬密度:thread count
57、织物组织:weave structure
58、平纹组织:plain structure
59、坏布:grey fabric
60、稀松织物:woven scrim
61、弓纬:bow of weave
62、断经:end missing
63、缺纬:mis-picks
64、纬斜:bias
65、折痕:crease
66、云织:waviness
67、鱼眼:fish eye
68、毛圈长:feather length
69、厚薄段:mark
70、裂缝:split
71、捻度:twist of yarn
72、浸润剂含量:size content
73、浸润剂残留量:size residue
74、处理剂含量:finish level
75、浸润剂:size
76、偶联剂:couplint agent
77、处理织物:finished fabric
78、聚酰胺纤维:polyarmide fiber
79、聚酯纤维非织布:non-woven polyester fabric
80、浸渍绝缘纵纸:impregnating insulation paper
81、聚芳酰胺纤维纸:aromatic polyamide paper
82、断裂长:breaking length
83、吸水高度:height of capillary rise
84、湿强度保留率:wet strength retention
85、白度:whitenness
86、陶瓷:ceramics
87、导电箔:conductive foil
88、铜箔:copper foil
89、电解铜箔:electrodeposited copper foil (ed copper foil)
90、压延铜箔:rolled copper foil
91、退火铜箔:annealed copper foil
92、压延退火铜箔:rolled annealed copper foil (ra copper foil)
93、薄铜箔:thin copper foil
94、涂胶铜箔:adhesive coated foil
95、涂胶脂铜箔:resin coated copper foil (rcc)
96、复合金属箔:composite metallic material
97、载体箔:carrier foil
98、殷瓦:invar
99、箔(剖面)轮廓:foil profile
100、光面:shiny side
101、粗糙面:matte side
102、处理面:treated side
103、防锈处理:stain proofing
104、双面处理铜箔:double treated foil
四、设计
1、原理图:shematic diagram
2、逻辑图:logic diagram
3、印制线路布设:printed wire layout
4、布设总图:master drawing
5、可制造性设计:design-for-manufacturability
6、计算机辅助设计:computer-aided design.(cad)
7、计算机辅助制造:computer-aided manufacturing.(cam)
8、计算机集成制造:computer integrat manufacturing.(cim)
9、计算机辅助工程:computer-aided engineering.(cae)
10、计算机辅助测试:computer-aided test.(cat)
11、电子设计自动化:electric design automation .(eda)
12、工程设计自动化:engineering design automaton .(eda2)
13、组装设计自动化:assembly aided architectural design. (aaad)
14、计算机辅助制图:computer aided drawing
15、计算机控制显示:computer controlled display .(ccd)
16、布局:placement
17、布线:routing
18、布图设计:layout
19、重布:rerouting
20、模拟:simulation
21、逻辑模拟:logic simulation
22、电路模拟:circit simulation
23、时序模拟:timing simulation
24、模块化:modularization
25、布线完成率:layout effeciency
26、机器描述格式:machine descriptionm format .(mdf)
27、机器描述格式数据库:mdf databse
28、设计数据库:design database
29、设计原点:design origin
30、优化(设计):optimization (design)
31、供设计优化坐标轴:predominant axis
32、表格原点:table origin
33、镜像:mirroring
34、驱动文件:drive file
35、中间文件:intermediate file
36、制造文件:manufacturing documentation
37、队列支撑数据库:queue support database
38、元件安置:component positioning
39、图形显示:graphics dispaly
40、比例因子:scaling factor
41、扫描填充:scan filling
42、矩形填充:rectangle filling
43、填充域:region filling
44、实体设计:physical design
45、逻辑设计:logic design
46、逻辑电路:logic circuit
47、层次设计:hierarchical design
48、自顶向下设计:top-down design
49、自底向上设计:bottom-up design
50、线网:net
51、数字化:digitzing
52、设计规则检查:design rule checking
53、走(布)线器:router (cad)
54、网络表:net list
55、计算机辅助电路分析:computer-aided circuit analysis
56、子线网:subnet
57、目标函数:objective function
58、设计后处理:post design processing (pdp)
59、交互式制图设计:interactive drawing design
60、费用矩阵:cost metrix
61、工程图:engineering drawing
62、方块框图:block diagram
63、迷宫:moze
64、元件密度:component density
65、巡回售货员问题:traveling salesman problem
66、自由度:degrees freedom
67、入度:out going degree
68、出度:incoming degree
69、曼哈顿距离:manhatton distance
70、欧几里德距离:euclidean distance
71、网络:network
72、阵列:array
73、段:segment
74、逻辑:logic
75、逻辑设计自动化:logic design automation
76、分线:separated time
77、分层:separated layer
78、定顺序:definite sequence
五、形状与尺寸:
1、导线(通道):conduction (track)
2、导线(体)宽度:conductor width
3、导线距离:conductor spacing
4、导线层:conductor layer
5、导线宽度/间距:conductor line/space
6、第一导线层:conductor layer no.1
7、圆形盘:round pad
8、方形盘:square pad
9、菱形盘:diamond pad
10、长方形焊盘:oblong pad
11、子弹形盘:bullet pad
12、泪滴盘:teardrop pad
13、雪人盘:snowman pad
14、 v形盘:v-shaped pad
15、环形盘:annular pad
16、非圆形盘:non-circular pad
17、隔离盘:isolation pad
18、非功能连接盘:monfunctional pad
19、偏置连接盘:offset land
20、腹(背)裸盘:back-bard land
21、盘址:anchoring spaur
22、连接盘图形:land pattern
23、连接盘网格阵列:land grid array
24、孔环:annular ring
25、元件孔:component hole
26、安装孔:mounting hole
27、支撑孔:supported hole
28、非支撑孔:unsupported hole
29、导通孔:via
30、镀通孔:plated through hole (pth)
31、余隙孔:access hole
32、盲孔:blind via (hole)
33、埋孔:buried via hole
34、埋/盲孔:buried /blind via
35、任意层内部导通孔:any layer inner via hole (alivh)
36、全部钻孔:all drilled hole
37、定位孔:toaling hole
38、无连接盘孔:landless hole
39、中间孔:interstitial hole
40、无连接盘导通孔:landless via hole
41、引导孔:pilot hole
42、端接全隙孔:terminal clearomee hole
43、准表面间镀覆孔:quasi-interfacing plated-through hole
44、准尺寸孔:dimensioned hole
45、在连接盘中导通孔:via-in-pad
46、孔位:hole location
47、孔密度:hole density
48、孔图:hole pattern
49、钻孔图:drill drawing
50、装配图:assembly drawing
51、印制板组装图:printed board assembly drawing
52、参考基准:datum referance
常用照明术语和单位 在进行照明设计时,有许多种照明指标,从而使照明设计走上了量化的轨道。特别是使用计算机以后,照明设计更为细致,这也就是要求更为科学地使用照明术语、照明物理量及计量单位。 1.1常用照明术语 1.1.1视觉 1)明视觉 在亮度超过10cd/㎡的环境里,视觉完全有锥状感受细胞起作用,最大的视觉响应在光谱蓝绿区间中的555nm处。此时的视觉称为明视觉。明视觉能够辨认很小的细节,并且有颜色感觉。 2)暗视觉 当环境亮度低于10‐2cd/㎡时,属于暗视觉的范围。此时,主要由视网膜的杆状细胞起作用。暗视觉只有明暗感觉而无颜色感觉。眼睛适应暗视觉需要3min的时间。 3)中介视觉当景物亮度增加到10‐2cd/㎡时,除明亮度增加外,还可以发现三个效应: A. 察觉物体中心凹的部分与察觉边缘一样容易; B. 开始感觉到颜色; C. 不同颜色的相对明亮度发生变化,尤其是红色比兰色更强。 此时,视网膜的锥状细胞和杆状细胞共同起作用。 4)阈限可见度:似见非见细节或目标时的可见度称为阈限可见度。
5)亮度对比C视野中目标亮度和背景亮度差与背景亮度之比,即 C=|Lt-Lb|/Lb 式中Lt----目标亮度(cd/㎡) Lb----背景亮度(cd/㎡) 6)阈值对比ˉC在阈值可见度时的亮度对比值。 7)对比:对视野中同时或连续看到的两个部分外观上的差别的评定成为对比。对比可分为亮度对比、明度对比和颜色对比。如不特别强调,通常指亮度对比。 8)明度对比:对视野中的目标和背景的主观亮度差别的评定称为亮度对比。对于彩色物体则指对明度差别的评定。 9)可见度:人眼辨认物体存在或形状的难易程度称为可见度。在室内应用时,以标准观察条件下恰可感知的标准视标的对比或大小定义。在室外应用时,以人眼恰可看到标准目标的距离定义。 10)可见度水平:作业的可见度水平(VL)是作业亮度对比C 和通过薄膜刚好能看清阈值对比ˉC之比: VL=C/ˉC 可见度水平是以观察者的阈限对比为单位来度量的。 11)对比显现因数(CRF)评价照明系统所产生的光幕反射对作业可见度影响的因数。该系数是一个作业在给定的照明系统下的可见度与该作业在参考照明条件的可见度之比。 1.1.2光环和照明装置
第一部分、计算机算法常用术语中英对照 Data Structures 基本数据结构 Dictionaries 字典 Priority Queues 堆 Graph Data Structures 图 Set Data Structures 集合 Kd-Trees 线段树 Numerical Problems 数值问题 Solving Linear Equations 线性方程组 Bandwidth Reduction 带宽压缩 Matrix Multiplication 矩阵乘法 Determinants and Permanents 行列式 Constrained and Unconstrained Optimization 最值问题Linear Programming 线性规划 Random Number Generation 随机数生成 Factoring and Primality Testing 因子分解/质数判定Arbitrary Precision Arithmetic 高精度计算Knapsack Problem 背包问题 Discrete Fourier Transform 离散Fourier变换Combinatorial Problems 组合问题 Sorting 排序
Searching 查找 Median and Selection 中位数 Generating Permutations 排列生成 Generating Subsets 子集生成 Generating Partitions 划分生成 Generating Graphs 图的生成 Calendrical Calculations 日期 Job Scheduling 工程安排 Satisfiability 可满足性 Graph Problems -- polynomial 图论-多项式算法Connected Components 连通分支 Topological Sorting 拓扑排序 Minimum Spanning Tree 最小生成树 Shortest Path 最短路径 Transitive Closure and Reduction 传递闭包Matching 匹配 Eulerian Cycle / Chinese Postman Euler回路/中国邮路Edge and Vertex Connectivity 割边/割点 Network Flow 网络流 Drawing Graphs Nicely 图的描绘 Drawing Trees 树的描绘 Planarity Detection and Embedding 平面性检测和嵌入
序号 English Chinese 序号 English Chinese 1bend 弯曲 102shrink mark收缩纹2broken 破烂 103stress mark顶白印 3broken label标贴烂 104thin spray喷油过薄 4broken screw缧丝断 105uneven coation涂色不圴 5burn mark烧痕 106uneven spray喷油不均匀 6burr 毛边 107uneven surface高低落差过大 7carton broken外箱烂 108untrimmed thread线头过长 8color deviatiion色差过大 109water mark水渍 9damage 损坏 110wrinkle 皱纹 10deform 变形 111wrong assortment错混装 11foreign tape纸屑 112wrong color错颜色 12dent mark凹陷 113wrong labelling错标贴 13dirt mark污渍 114wrong packing错包装 14flash 披锋 115wrong products错货品 15flow mark胶料注塑纹 116wrong sewing label错缝合标贴 16foreign material外物(就是脏东西 117foreign stuffing线头 17gate mark水口修不好 118missing letter缺字 18glue mark胶水渍 119missing segment缺字划 19hole misalignment孔位不正 120part detach配件甩掉
灯具专业术语 Document serial number【UU89WT-UU98YT-UU8CB-UUUT-UUT108】
灯具、照明、电光源专业词汇大全: 光源系列专业词汇、专业术语: 白炽灯(incandescence lamp) 荧光灯(fluorescence lamp) 节能灯(energy-saving lamp) 卤素灯(halogen lamp) 钠灯(sodium lamp) 氖灯(neon lamp) 高强放电灯(High-intensity discharge) 石英灯(quartz lamp) 发光二极管(LED) 霓虹灯(neon light) 汽车灯(auto lamp) 背光灯(backlight) 碘钨灯(iodine-tungsten lamp)
汞灯(mercury lamp) 单端灯(single end lamp) 低压灯(low voltage lamp) 杀菌灯(sterilizing lamps) 灭蚊灯(mosquito-killing lamp) 日光灯(daylight lamp) 脉冲灯(impulse lamp) 紫外线灯(ultraviolet lamp) 车间灯(workshop lamp) 光源配件(lamp fittings) PAR灯(Parabolic aluminized reflectors)溴钨灯(bromine-tungsten lamp) 放电管(discharge tube) 植物生长灯(Lamps for plant growing) 特种灯泡(special type bulb)
信号与系统常用词汇中英文对照表 序号英文词汇中文翻译 1 Absolutely summable impulse response 绝对可和的冲激响应 2 Absolutely integrable impulse response 绝对积的冲激响应 3 Accumulation property 累加性质 4 Adder 加法器 5 Additivity 可加性 6 Aliasing 混叠 7 Allpass system 全通系统 8 Amplitude Modulation(AM) 幅度调制 9 Amplifier 放大器 10 Analog-to-Digital Conversion 模数转换 11 Analysis equation 分析方程 12 Aperiodic signal 非周期性信号 13 Associative property 结合性质 14 Audio system 音频系统 15 Autocorrelation function 自相关函数 16 Band-limited signal 带限信号 17 Band-limited interpolation 带限内插 18 Bandpass filter 带通滤波器 19 Bandpass-sampling technique 带通抽样方法 20 Bandpass signal 带通信号 21 Bandwidth of an LTI system 线性时不变系统的带宽 22 Bilinear transformation 双线性变换 23 Block diagram 方框图 24 Bode plot 波特图 25 Butterworth filter 巴特沃斯滤波器 26 Carrier frequency 载波频率 27 Carrier signal 载波信号 28 Cartesian (rectangular) form for complex number 复数的笛卡尔(直角坐标)形式 29 Cascade-form block diagram 级联型方框图 30 Cascade (series) interconnection 级联连接 31 Causal LTI system 因果的线性时不变系统 32 Channel equalization 信道均衡 33 """Chirp"" transform algorithm" 线性调频变换算法 34 Closed-loop system 闭环系统 35 Coefficient multiplier 系数乘法器 36 Communication system 通信系统 37 Commutative property 交换性质 38 Complex conjugate 复共轭 39 Complex exponential 复指数 40 Complex number 复数 41 Continuous-time signal 连续时间信号 42 Conjugate symmetry 共轭对称性
鞋业(类)常用术语中英文对照 ---欧维思品牌鞋业折扣店 --https://www.doczj.com/doc/6416266128.html, 目录 第一章:Stage 阶段………………………………P2-P10 第二章技术……………………………P7-P15 第三章鞋型转移……………………………P16-P17 欧维思品牌鞋业折扣店招商加盟网--https://www.doczj.com/doc/6416266128.html,- 1 -
第一章:Stage 阶段 ----欧维思品牌鞋业折扣店https://www.doczj.com/doc/6416266128.html, I.3.1. Two main sections in Dev. Division 开发的两大部分: 1. Development section: explain more in process of new models to make samples in order to introduce market to achieve qty. 开发部分:此部分着重于新型体的样品制作,以便可介绍给客户来争取一定数量的订单。 https://www.doczj.com/doc/6416266128.html,mercialization section: explain more in process of technical after it was developed with Fitting test and Wear test to ensure that all products meet consumers’ expectations in terms of Fitting, Comfort and Performance. 技术部分:开发转移到技术部门,此阶段着重于在开发阶段完成试穿测试, 确保产品在试穿/舒适/功能方面可满足客户的要求后进行的技术工作。 I.3.2. Development Stages 开发阶段 I.3.2.1. PPR: Pre Prototype Review 初始线条评估 1st stage to review all sample products Internally by customer ( Marketing,designer,L.O) For performance shoes, we have Fitting and Wear Test Sample to be sent. * The topics of review are : 1. Material 2. Quality 3. Performance 4. Price 5. Color 6. Design 7. Forecast 客人内部(市场销售、设计师、本地客人)对于新鞋型第一阶段之评估。 对于功能性鞋型,我们要寄Fitting test &Wear test试穿样品。 此时检查要点如下: 1、材料 2、品质 3、功能 4、价格 5、颜色 6、设计 7、订单预测 I.3.2.2. PFR:Prototype Final Review 最后线条评估 Final stage to review all sample shoes before introducing the products to the customers. At this time, all key points should be finally decided (Pattern / Design, Color,Price, Material (should be released), etc.). The result of Fitting Test should be considered for PPR meeting as a basic. 在全部新鞋型介绍给客户前之最后检查阶段,此时所有要点均需做出最后确定,如:纸版、设计、颜色、价位、材料(必须是通过了测试)等等。 寄出试样鞋时需附上试穿报告。此时的试穿结果是PPR 会议之基本考量点。 I.3.2.3. SMS1:Salesman Sample 1 销样一 欧维思品牌鞋业折扣店招商加盟网--https://www.doczj.com/doc/6416266128.html,- 2 -
一:常用术语 CMM Component module move 机动组件整合 CEM Contract Manufaction service 合约委托代工 IBSC Internet Business Solution Center 国际互联网应用中心一:常用术语 CMM Component module move 机动组件整合 CEM Contract Manufaction service 合约委托代工 IBSC Internet Business Solution Center 国际互联网应用中心PCEG Personal Computer Enclosure group 个人计算机外设事业群(FOXTEQ) ESBG Enterprise system business group 鸿富锦事业群 SABG system assembly business group 系统组装事业群Stamping tool shop I 冲模一厂 Stamping tool shop II 冲模二厂 Prototype workshop 样品中心 Steel factory 裁剪厂 PCE molding tooling workshop PCE塑模厂 Hua Nan test and measurement center 华南检测中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 镁合金 Engineer standard 工标
第一部分计算机算法常用术语中英对照 Data Structures 基本数据结构Dictionaries 字典Priority Queues 堆Graph Data Structures 图Set Data Structures 集合Kd-Trees 线段树Numerical Problems 数值问题Solving Linear Equations 线性方程组Fourier变换Bandwidth Reduction 带宽压缩Matrix Multiplication 矩阵乘法Satisfiability 可满足性Determinants and Permanents 行列式Linear Programming 线性规划Matching 匹配Constrained and Unconstrained Optimization 最值问题Clique 最大团Cryptography 密码Random Number Generation 随机数生成Shortest Path 最短路径recursion递归Factoring and Primality Testing 因子分解/质数判定Searching 查找Sorting 排序Arbitrary Precision Arithmetic 高精度计算Calendrical Calculations 日期 Discrete Fourier Transform 离散Combinatorial Problems 组合问题 Median and Selection 中位数Generating Permutations 排列生成 Generating Subsets 子集生成Generating Partitions 划分生成 Generating Graphs 图的生成Job Scheduling 工程安排 Graph Problems -- polynomial 图论-多项式算法Connected Components 连通分支Topological Sorting 拓扑排序Minimum Spanning Tree 最小生成树Transitive Closure and Reduction 传递闭包Network Flow 网络流 Eulerian Cycle / Chinese Postman Euler回路/中国邮路 Edge and Vertex Connectivity 割边/割点Independent Set 独立集 Drawing Graphs Nicely 图的描绘Drawing Trees 树的描绘 Planarity Detection and Embedding 平面性检测和嵌入Vertex Cover 点覆盖 Graph Problems -- hard 图论-NP问题Traveling Salesman Problem 旅行商问题Hamiltonian Cycle Hamilton回路Graph Partition 图的划分 Vertex Coloring 点染色Edge Coloring 边染色 Graph Isomorphism 同构Steiner Tree Steiner树 Feedback Edge/Vertex Set 最大无环子图Computational Geometry 计算几何 Convex Hull 凸包Triangulation 三角剖分 V oronoi Diagrams V oronoi图Nearest Neighbor Search 最近点对查询Range Search 范围查询Point Location 位置查询 Intersection Detection 碰撞测试Bin Packing 装箱问题 Medial-Axis Transformation 中轴变换Polygon Partitioning 多边形分割Simplifying Polygons 多边形化简Shape Similarity 相似多边形 Motion Planning 运动规划Maintaining Line Arrangements 平面分割Minkowski Sum Minkowski和Set and String Problems 集合与串的问题 Set Cover 集合覆盖Set Packing 集合配置 Approximate String Matching 模糊匹配Text Compression 压缩 DP—Dynamic Programming动态规划Longest Common Substring 最长公共子串Shortest Common Superstring 最短公共父串String Matching 模式匹配 Finite State Machine Minimization 有穷自动机简化
熟练掌握名目繁多金融术语除了是专业人士的必修课外,在金融渗透、人人参与投资的时代,了解一些常用的金融术语也对普通投资者们大有益处。本文就为你详细列举了一些常用的可中英文对照的金融术语,帮助你了解生活中的金融。 金融 资产组合(Portfolio):指投资者持有的一组资产。一个资产多元化的投资组合 通常会包含股票、债券、货币市场资产、现金以及实物资产如黄金等。 证券投资(Portfolio Investment) :国际收支中、资本帐下的一个项目,反映资 本跨国进行证券投资的情况,与直接投资不同,后者涉及在国外设立公司开展业务,直接参与公司的经营管理。证券投资则一般只是被动地持有股票或债券。 投资组合经理(Portfolio Manager):替投资者管理资产组合的人,通常获授权 在约定规范下自由运用资金。共同基金的投资组合经理负责执行投资策略,将资金投资在各类资产上。 头寸(Positio n):就证券投资而言,头寸是指在一项资产上做多(即拥有)或做空(即借入待还)的数量。 总资产收益率(ROTA):资产收益率是企业净利润与平均资产总额地百分比,也 叫资产回报率(ROA),它是用来衡量每单位资产创造多少净利润的指标。其计 算公式为:资产收益率二净利润/平均资产总额X 100% ;该指标越高,表明企业 资产利用效果越好,说明企业在增加收入和节约资金使用等方面取得了良好的效果,否则相反。 整批交易(Round Lot Trade):指按证券和商品在市场最普遍的交易单位(例如 100股为一单位)进行的交易。 交易回合(Round Turn):指在同一市场上通过对两种证券或合约一买一卖,或 一卖一买的交易两相抵消。通常在计算手续费时会提及交易回合。
1.新产品以及模具开发products and tooling developing 2D/3D drawing 平面/实体图 action results 措施结果 bump among products 货与货之间碰撞 bump at sampling 抽取样品时产品有碰撞 chamfering倒角 classification 级别 CNC milling after quenching 淬火后CNC铣加工 design/process FMEA 设计/过程FMEA design/process responsibility 设计/过程责任部门 detection 探测 die casting 压铸 die fabrication 模加工 Die location layout 工模排位图 Die polished 省模 die size out of the specification 模具尺寸不符合要求 Die trial 试模 electrode made by CNC CNC铜公 gate design 水口设计 grinding by precision grinding machine 磨床加工 machining by CNC wire-cut machine 线切割加工 machining by electric discharge machine EDM 电蚀火花加工 mold design 工模设计 painting 喷油 pile products up due to laying in disorder 摆放不正确堆积产品 polishing 抛光、磨光 polishing/cotton wheels 布轮 potential effects of failure 潜在失效后果 potential failure mode 潜在失效模式 prevention 预防 Removing parting line flash 磨夹口 responsibility & target completion date 责任和目标完成日期 rib and corner 肋材和尖角 sample stored in warehouse 样板入仓 sanding wheels 砂布轮 set die-casting parameter/locking force/ injection force/injection velocity/shot time/ volume of release agent/die-open time/ ejector time/pressure rating/metal temperature/ control temperature/ operation according to WI按工作指示设定压铸参数/锁模力/射料力/射料速度/打锤时间/喷雾量/开模时间/顶出时间/压力参数/料温/控制温度/作业vibrating 震动 2.热处理 heat treatment air cooling 空气冷却 annealing 退火 carbonization 碳化
光通量luminous flux 光通量是指光源在单位时间里向周围空间辐射的,能引起视觉反应能量,即可见光的能量。它描述的是光源的有效辐射值,单位是1m(流明)。 同样功率的灯具的光通量可能完全不同,这是因为它们的光效不同的缘故。比如:普通照明灯泡只有10 1m/瓦,而金属卤素灯可以达到80 1m/瓦。 照度illuminance 照度是指在一个面上的光通密度,它是射入单位面积内的光通量,单位是Lx。 照度的定义和测量比较复杂,象平均柱面照度、等效球照度、标量照度等,它们的测量条件和计算方法有所不同。在建筑和装饰工程中经常会遇到、灯光系统中偶尔也涉及到照度概念。 发光强度luminous intensity 发光强度简称光强,国际单位是candela(坎德拉)简写cd。Lcd是指光源在指定方向的单位立体角内发出的光通量。 照明方式和种类例如: 1. 一般照明general lighting 2. 局部照明local lighting等 详细分类见《建筑照明术语标准》 电光源及其附件 例如: 1. 白炽灯incandescent lamp 2. 卤钨灯tungsten halogen lamp等 详细分类见《建筑照明术语标准》 灯具及其附件 例如: 1. 直接型灯具direct luminaire 2. 漫射型灯具diffused luminaire等 详细分类见《建筑照明术语标准》 采光技术例如: 1. 阳光;直射日光sunlight 2. 天空(漫射)光skylight等 详细分类见《建筑照明术语标准》 材料的光学特性和照明测量 例如: 1. 反射reflection 2. 透射transmisson 3. 漫射diffusion等 详细分类见《建筑照明术语标准》
汽车行业常用英文缩写术语(一) O T S : Off T ooling Sample 译为“工程样件” 。 定义:在非生产节拍下,使用批量状态的工装生产的样件,用于验证产品的设计能力。 工程样件得到认可后形成的报告叫 OTS 认可报告 ,也叫 工程认可报告 。主要包括: 1. 设计资料(图纸等设计资料) ; 2.PSW( 产品保证书 ) ; 3. 检验合格报告(尺寸、性能、外观合格报告) ; 4. 样件控制计划( CP ) ; 5. 设计失效模式分析 DFMEA (一般不提交)
6. 实验报告及实验室资质证明; 7. 材料(如金属、橡胶、塑料)的材质保证书或材质检测报告; 8.BOM 表(分供方清单) ; 9. 测量系统分析( MSA )等。以上均为供方提供,受到需方审核。需方反馈供方时,输出为 OTS 认可报告。 SOP : Start Of Production 译为“开始量产” , 即产品可以进行大批量生产了。 EOP : End of Production 译为“量产结束” ,是指产品生命周期结束,停止量产,此后配件一般不再批量生产和 提供,但为满足售后需要,有时还需要组织生产,但往往是按确定的订单来生产。 APQP :
Advanced Product Quality Planning 译为“先期产品质量策划” , 是 QS9000/TS16949 质量管理体系的一部分。 定义:是一种用来确定和制定确保某产品使顾客满意所需步骤的结构化方法。目的: 1. 引导资源,使顾客满意; 2. 促进对所需更改的早期识别; 3. 避免晚期更改; 4. 以最低的成本及时提供优质产品。 FEMA : Failure Mode and Effect Analysis 译为“失效模式和效果分析” , 是一种用来确定潜在失效模式及其原因的分析方法。 是 FMA (故障模式分析)和
灯光照明术语大全 A照明常用术语 1、光:光是一种电磁波。 可见光:由光源发出的辐射能中的一部分,即能产生视觉的辐射能.常被称作为“可见光”。 可见光的波长:从380nm----780nm 紫外线的波长:从100nm---380nm,肉眼看不见。 红外线的波长:从780nm---1mm,肉眼看不见。 2、色温 以绝对温度K来表示。是将一标准黑体加热,温度升高至某一程度时,颜色开始由红—浅红-橙黄-白-蓝白-蓝,逐渐变化,利用这种光色变化的特性,某光源的光色与黑体在某一温度下呈现的光色相同时,我们将黑体当时的绝对温度称为该光源的相关色温。
3、显色指数(Ra) 衡量光源显现被照物体真实颜色的能力参数。显色指数(0-100)越高的光源对颜色的再现越接近自然原色。 3.1、色温与感觉
3.2、人体生物钟与光色温 3.3、显色性的效果与用途 4、光通量(流明Lm) 表示发光体发光的多少,流明是光通量的单位。(发光愈多流明数愈大) 5、光效:光源所出的光通量与所消耗电功率之比。单位:流明/瓦(Lm/W)
6、平均寿命 也称额定寿命,它是指一批灯点亮至一半数量损坏不亮的小时数。 7、光强单位立体角内的光通量单位: cd 8、照度 照度是用来说明被照面(工作面)上被照射的程度,通常用其单位面积内所接受的光通量来表示,单位为勒克斯(lx)或流明每平方米(lm/m2)。 9、亮度:亮度是用来表示物体表面发光(或反光)强弱的物理量,被视物体发光面在视线方向上的发光强度与发光面在垂直于该方向 上的投影面积的比值,称为发光面的表面亮度,单位为坎德拉每平方米(cd/m2)。 10、发光效率:通常简称为光效,是描述光源的质量和经济的光学量,它反映了光源在消耗单位能量的同时辐射出光通量的多少,单位是流明每瓦(lm/w) 11、光束角:是指灯具光线的角度灯杯的角度。一般常见的有10°、24°、38°3种。
Aspen Plus常用词汇中英文对照表 A adiabatic 绝热的 adsorption 吸附 aircooler 空冷器 algorithm 算法 alias 又名,别名 align 使……排成直线 ambient temperature 环境温度 analysis 分析 annotation 注释 apparent component approach 表观组分方法approach 方法 aqueous 水溶液的,水的,含水的 assay化验(油品分析) ADA (assay data analysis)化验数据分析assign 指定 attach连接 attr-comps 组分属性 attr-scaling属性标量 available可用的 B backup (降液管内的清液层)高度 baffles 挡板 balance 平衡模块,平衡 base components 基准组分 base method 基本方法(包含了常见物性方法)batch 批量处理,一批 BatchFrac 间歇精馏 binary interaction 二元交互作用 blank simulation 空白模拟 block模块 Block-Var 模块变量boilup ratio 再沸比 bottoms rate 塔底产品流率 bottoms to feed ratio塔底产品流率与进料流率比brake power 轴功率 Broyden 布洛伊顿拟牛顿法 built-in 内置 C calculator 计算器 capacity 通量 capacity factor 通量负荷因子 cascade 层叠 case study 工况分析 category 类别,种类 chemical equilibrium 化学平衡 Chem-Var 化学变量 class分类 clearance 间隙 co-current 并流 coefficient 系数 column 塔 CGCCs (column grand composite curves)塔的总组合曲线 column specifications 塔设定 Compattr-Var 组分变量 component 组分 composition 组成 Compr 压缩机或涡轮机模块 comps-groups 组分分组 conceptual design 概念设计 condenser 冷凝器 condenser specification 冷凝器设定 configuration 配置
常用保险术语 保险费率 premium rate 单位保险金额应该收取的保险费。 损失 loss 非故意的、非预期的和非计划的经济价值的减少或灭失。通常分为直接损失和间接损失。 损失程度 loss severity 保险标的可能遭受的损失的严重程度。 直接损失 direct loss 由风险事故导致的财产本身的损失。 间接损失 indirect loss 由直接损失引起的额外费用损失、收入损失和责任损失等无形损失。 保险 insurance 投保人根据合同约定,向保险人支付保险费,保险人对于合同约定的可能发生的事故因其发生所造成的财产损失承担赔偿保险金责任,或者当被保险人死亡、伤残、疾病或者达到合同约定的年龄、期限时承担给付保险金责任的商业保险行为。 财产保险 property insurance 以财产及其有关利益为保险标的的保险。 企业财产保险 commercial property insurance 以单位、团体所有或占有的在指定地点的财产及其有关利益为保险标的的财产保险。 营业中断保险 business interruption insurance 以单位因停产、停业或经营受影响而面临的预期利润的减少及必要的费用支出为保险标的的财产保险。 机器损坏保险 machinery breakdown insurance 以各类已安装完毕并投入运行的机器为保险标的财产保险。 货物运输保险 cargo insurance 以运输途中的货物为保险标的保险。 海上货物运输保险 ocean marine cargo insurance 以通过海上运输方式运输的货物作为保险标的的保险。 陆上货物运输保险 inland transit insurance 以通过陆上运输方式运输的货物为保险标的的保险。
组装、冲压、喷漆等专业词汇 Assembly line组装线 Layout布置图 OOBA开箱检查 fit together组装在一起 fasten锁紧(螺丝) fixture 夹具(治具) pallet栈板 barcode条码 barcode scanner条码扫描器 fuse together熔合 repair修理 operator作业员 QC quality品管 supervisor 课长 section supervisor课长 deputy section supervisor =vice section superisor副课长 ME制造工程师 MT制造生技 cosmetic inspect外观检查 inner parts inspect内部检查 thumb screw大头螺丝 lbs. inch镑、英寸 front plate前板 rear plate后板 chassis基座 bezel panel面板 power button电源按键 reset button重置键Hi-pot test of SPS高源高压测试 V oltage switch of SPS 电源电压接拉键 sheet metal parts 冲件 plastic parts塑胶件 SOP制造作业程序 material check list物料检查表 trolley台车 carton纸箱 sub-line支线 left fork叉车 personnel resource department 人力资源部 production department生产部门 planning department企划部 QC Section品管科 stamping factory冲压厂 painting factory烤漆厂 molding factory成型厂 punching machine 冲床 robot机械手 lathe车床 planer |'plein|刨床 miller铣床 grinder磨床 driller??床 linear cutting线切割 electrical sparkle电火花 welder电焊机 staker=reviting machine铆合机 position职务 president董事长 general manager总经理 special assistant manager特助 factory director厂长 department director部长 deputy manager | =vice manager副理 group leader/supervisor组长 line supervisor线长 thickness gauge厚薄规 gauge(or jig)治具 power wire电源线 buzzle蜂鸣器 defective product label不良标签 identifying sheet list标示单 iudustrial alcohol工业酒精 Tiana天那水 packaging打包 missing part漏件 wrong part错件 excessive defects过多的缺陷 critical defect极严重缺陷 major defect主要缺陷 minor defect次要缺陷 not up to standard不合规格 dimension/size is a little bigger尺寸偏 大(小) cosmetic defect外观不良 slipped screwhead/slippery screw head 螺丝滑头 speckle斑点 rust生锈 deformation变形 burr(金属)flash(塑件)毛边 poor staking铆合不良 excesssive gap间隙过大 grease/oil stains油污 inclusion杂质 painting peel off脏污 shrinking/shrinkage缩水 mixed color杂色 scratch划伤 poor processing 制程不良 poor incoming part事件不良 painting make-up补漆 discoloration羿色 water spots水渍 polishing/surface processing表面处理 exposed metal/bare metal金属裸露 lack of painting烤漆不到位 safety安全 quality品质 delivery deadline交货期 cost成本 engineering工程 die repair模修 enterprise plan = enterprise expansion projects企划 qualified products, up-to-grade products良品 defective products, not up-to-grade products不良品 to return material/stock to退料 scraped |'skræpid|报废 (be)qualfied, up to grade合格 not up to grade, not qualified不合格
有关照明名词术语 1、显色指数(Ra) 衡量光源显现被照物体真实颜色能力的参数.显示指数越高(0-100)的光源对颜色的再现越接近自然原色. 2、光效(η) 光源将电能转化为可见光的效率,即光源消耗每一瓦电能所发出的光,数值越高表示光源效率越高.从经济方面考虑,光效是一个重要的参数.单位:流明(瓦/Lm/W).即光效η=光通量(Lm)/耗电量(W)。 3、光通量(φ) 光源发射并被人的眼睛接收的能量之总和.光通量单位:流明(Lm)。 4、照度(E) 单位被照面接受到的光通量。如果1平方米被照面接受到的光通量为1流明(Lm),则该被照面上的照度为1勒克司(Lx)。照度E=被照面的光通量(Lm)/被照面面积(㎡)。 5、光强 光源在某一给定方向的单位立体角内发射的光通量称为光源在该方向的发光强度,简称光强,单位:坎德拉(cd) 6、亮度 光源在某一方向的亮度是光源在同一方向的强度与发光面在该方向上投影表面积之比,单位:坎德拉/米(cd/㎡)。 7、色温 光源所发出的光的颜色与“黑体”在某一温度下辐射的颜色相同时,“黑体”的温度就称为该光源的色温。“黑体”的温度越高,光谱中蓝色的成分越多,而红色的成分越少。单位:开尔文(K)。例如:白炽灯的色温是2700K左右,称为暖色,用RD表示。日光色荧光灯的色温是6400K左右,称为冷色,用RR表示。 8、眩光 当人眼直接感受的亮度超过接受的能力时便产生不舒适、辩别能力下降等不良反映,眩光是一种光污染,选择光源、灯具不当或光源与灯具配合不当时,往往产生眩光。 9、功率因数 有功功率与视在功率之比。视在功率等于有功功率加无功功率。功率因数低,无功损耗大,破坏电网的平衡度,而且电流中的谐波含量高,对电网产生污染。 10、平均寿命 50%损坏时的时间。 11、电磁干扰 气体放电灯镇流器在使用过程中,会通过辐射、传导等方式对周围电器产生干扰。 12、光衰 光源在使用过程中,随着时间的推延,其光通量逐渐减少的现象称为光衰。 13、谐波 电子镇流器在将工频(50/60HZ)交流电变换为较高频率的交流电过程中,会产生污染电网的有害波。谐波的大小用谐波含量表示。国家标准对谐波含量的要求为:有H级和L级。H级:一次