History of specification
规格书修订记录
Date Contents Remarks 2014-04-26 First issue
Contents目录
1. Scope 适用范围 (4)
2. Specification 主要技术参数................................................................................................................................. . (4)
3. Battery configuration 电池组成 (4)
4. Assembly Drawing 装配图纸 (5)
5.Battery Performance Criteria 电池性能检查及测试 (6)
5.1 Appearance 外观 (6)
5.2 Measurement Apparatus 测试设备要求 (6)
5.3 standard Test Condition 标准的测试条件 (6)
5.4 Standard Charge 标准充电 (6)
5.5 Electrical Performance电性能测试 (6)
5.5.1 Temperature Dependence of Capacity (Discharge) 放电温度特性 (6)
5.5.2 Cycle Life循环性能 (7)
5.5.3 Shelf Life荷电保持能力 (7)
5.6 Mechanical Performance 机械性能 (7)
5.7 Safety Performance 安全性能 (8)
5.8 Rest Period 搁置时间................................................................................................................................. .. (8)
6. Storage and Others 贮存及其它事项................................................................................................................... .. (8)
6.1 Long Time Storage 长期贮存............................................................................................................. .. (8)
6.2 Others 其它事项................................................................................................................................. .. (8)
1 Charging 充电...................................................................................................................................................... . (9)
1.1 Charging current 充电电流 (9)
1.2 Charging voltage 充电电压 (9)
1.3 Charging temperature 充电温度 (9)
1.4 Prohibition of reverse charging 禁止反向充电 (9)
2 Discharging 放电..................................................................................................................................................... . (10)
2.1 Discharging current 放电电流..................................................................................................................... .. (10)
2.2 Discharging temperature 放电温度............................................................................................................... (10)
2.3 Over-discharging 过放电............................................................................................................................... (10)
3. Prtection Circuit Module 保护电路模块................................................................................................................. (10)
3.1 overcharging prohibition: 过充保护电压 (10)
3.2 over-discharging prohibition: 过放电保护 (10)
4. Storage 贮存 (11)
5. Handling Instructions电池的注意事项 (11)
6. Amendment of this Specification产品规格书的修订 (12)
1. Scope 适用范围
The specification shall be applied to Li-ion polymer rechargeable battery pack of 051221 80 mAh , which is manufactured by HUA YU New Power Co.,Ltd.
本规格书适用于华豫电源有限公司生产的051221 80 mAh 聚合物锂离子可充电电池.
2. Specification 主要技术参数
3.Battery configuration 电池组成
NO Item
Criteria Remarks 3.1 Semi-manufactured cell
051221 80mAh
1PCS 3.2
NO
Items
Criteria
Remarks
2.1
Weight 重量（g ）
约1.6g
2.2
Typical Capacity 典型容量 80mAh 0.2C charge and 0.2C discharge for cut-off voltage 0.2C 充/0.2C 放电至终止电压 (到货后一周内测试) Minimum Capacity 最小容量
75mAh 2.3 Nominal Voltage
标称电压
3.70V
2.4
Internal Impedance 内阻
Cell: ≤450m? AC 1KHz after standard charge
标准充电后AC 1KHz 测试 2.5 Charge voltage 充电电压（V ）
4.20V
2.6 Standard charge current 标准充电电流
16mA CC/CV 恒流恒压充电，充电截止电流0.8mA 2.7 Fast charge current 快速充电电流
40mA 2.8 Standard dis-charge current 标准放电电流
16mA 2.9 Fast discharge current 快速放电电流
40mA 2.10
Discharge cut-off voltage 放电截止电压 2.75V
2.11
Operating T emperature 工作温度
0~+45℃ Charging 充电 -20~+60℃
Discharging 放电
2.12
Storage T emperature 贮存温度
within 1 month
1个月内：-20℃~+45℃ Relative humidity 相对湿度:
75%RH recovery capacity ratio ≥
80% (*)
可恢复容量百分比不低于80%(*)
within 3 month
3个月内：-20℃~+35℃ within 6 month 6个月内：-20℃~+25℃
4．Assembly Drawing装配图
T 5.0 mm Max
W 21.5 mm Max
H 12.1 mm Max
wire: 1571 32#
L 15±2mm
connector: 无 None
5.1 Appearance 外观
There shall be no such defect as scratch, flaw, crack, rust, leakage, which may adversely affect commercial value of battery.
电池外表面清洁，无电解液泄漏，无明显的划痕及机械损伤，无变形，无影响电池价值的其它外观缺陷。
5.2 Measurement Apparatus 测试设备要求
(1) Dimension Measuring Instrument尺寸测量设备
The dimension measurement shall be implemented by instruments with equal or more precision scale of 0.01mm. 测量尺寸的仪器的精度应不小于0.01mm
(2)Voltmeter 电压表
Standard class specified in the national standard or more sensitive class having inner impedance not less than 10 KΩ/V.
国家标准或更灵敏等级,内阻不小于10 KΩ/V.
(3) Ammeter电流表
Standard class specified in the national standard or more sensitive class. T otal external resistance including ammeter and wire is less than 0.01Ω.
国家标准或更灵敏等级，外部总体内阻包括电流表和导线应小于0.01Ω.
(4) Impedance Meter内阻测试仪
Impedance shall be measured by a sinusoidal alternating current method(AC 1kHz LCR meter).
内阻测试仪测试方法为交流阻抗法(AC 1kHz LCR).
5.3 standard Test Condition标准的测试条件
T est should be conducted with new batteries within one month after shipment from our factory and the cells shall not be cycled more than five times before the test. Unless otherwise defined, test and measurement shall be done under temperature of 20±5℃and relative humidity of 45~85%.
测试电池必须是本公司出厂时间不超过一个月的新电池，且电池未进行过五次以上充放电循环。除非其它特殊要求，本产品规格书规定的测试的环境条件为：温度20±5℃，相对湿度45%~85%。
5.4 Standard Charge 标准充电
0.2CmA=16mA
Full charge condition: Constant current 0.2CmA,Constant voltage 4.2V （Appove:6h）
25±2℃.
0.2CmA16mA) 4.2V(CC-CV) 在25±2℃环境下充电(大约6h)；
5.5 Electrical Performance电性能测试
5.5.1 Temperature Dependence of Capacity (Discharge) 放电温度特性
Cells shall meet the discharge capacity requirements listed in the below table under respective discharge temperatures. The capacities are to be measured with constant discharge current 500mA (2.75V cut-off) after standard charge at 25±2℃.
电池在25±2℃标准充电，然后在30分钟内冷却或加热到测试温度。放电前电池在此温度下保持1小时，放电电流为16mA（2.75V关断），做完一个温度实验后，电池在室温下放置2h然后进行充电（25±2℃），要求如下：Discharge T emperature放电温度-10℃20℃50℃
Discharge Capacity放电容量50% 100% 85%
5.5.2 Cycle Life循环性能
30min rest period after standard charge, 0.2CmA discharge to a cut-off voltage of 3.0V, 30min rest period, the capacity shall be measured after 300 cycles of standard charge and discharge at 20±5℃.
Capacity ≥48mAh
标准充电后，搁置30min，0.2CmA放电至3.0V，搁置30min，重复上述步骤进行循环，直至电池循环300次测试温度20±5℃（影响电池循环性能的重要参数），要求如下：
容量≥48mAh
5.5.3 Shelf Life荷电保持能力
Item项目Measuring Procedure测试方法Requirements要求
Storage Characteristics 1常温贮存1 The capacity on 0.2CmA discharge shall be
measured after standard charge and then storage
at 20±5℃for 28 days.
标准充电后电池在20±5℃的环境中贮存28天，
测试0.2CmA放电容量（保持容量）
Remaining Capacity
≥70%
容量保持≥70%
Storage Characteristics 2高温贮存1
The capacity on 0.2CmA discharge shall be
measured after standard charge and then storage
at 50±2℃for 16h.
标准充电后电池在50±2℃的环境中贮存16h，测
试0.2CmA放电容量（保持容量）
Remaining Capacity
≥60%
容量保持≥60%
2
After above measured Remaining capacity, the
capacity on standard discharge shall be
measured after standard charge.
0.2CmA循环3次，测试恢复容量（3周循环的最
大放电容量）
Recovery capacity
≥80%
容量恢复≥80%
5.6Mechanical Performance机械性能
Item Measuring Procedure Requirements
Vibration test 振动测试After standard charge, the battery is to be tested as
following conditions:
Amplitude:0.8mm
Frequency:10~55Hz(sweep:1Hz/min)
Direction: X/Y/Z axis for 90~100min. The battery is to be
tested in three mutually perpendicular to each axis.
标准充电后，电池在以下条件下测试:
振幅: 0.8mm
振动频率: 10~55Hz(扫频:1Hz/min)
方向: X、Y、Z三个互相垂直方向往复振动90~100min.
No fire, no explosion,
is obtained.
电池不起火,不爆炸，
Drop T est 跌落测试Drop the battery in the shipment condition from 1m height
onto 5cm it 3 times each of X, Y, and Z directions at 25±2℃
在出货条件下将由高度为1m的位置自由跌落到置于
5cm,X,Y,Z方向上各三次.
No fire, no explosion,
is obtained.
电池不起火,不爆炸，
5.7Safety Performance安全性能
Item Condition Criteria
Short circuiting T est
短路测试The battery shall be subjected to a short-circuit
condition with a wire of resistance less than 100mΩ for 1
hour.
准充电后，用100mΩ电阻短路1小时
No fire, no explosion,
is obtained.
电池不起火,不爆炸，
High temperature test
高温测试cell shall be charged in stored under 40℃±2℃and
90%RH-95%RH for 48 hours.
标准充电后，将电池放入40℃±2℃，相对湿度为
90%-95%的恒温恒湿箱中搁置48h。
Discharge time≥
36mins
放电时间36mins No
distortion不变形,
No fire, no explosion,
is obtained.
电池不起火,不爆炸，
Heating T est2 热冲击A battery is to be heated in a gravity convection or
circulating air oven. The temperature of the oven is to be
raised at a rate of 5±2℃/min to a temperature of 130±
2℃at which temperature the oven is to remain for 30
minutes before the test is discontinued.
电池放于热箱中，温度以（5±2℃）/min的速率升至120
±2℃并保温30min.
No explosion, no fire.
电池不起火,不爆炸
Overcharge
testing （NO PCM）过充测试（无保护板）Battery charged at 1.0CmA current with a voltage limit of
4.8V.charging is continued for 8 hours.
标准充电后，恒流恒压源设定为4.8V，以1C的电流持续
充电8H.
No smoke or fire
不起火,不冒烟
5.8 Rest Period搁置时间
Unless otherwise defined, 30min,rest period after charge,30min,rest period after discharge.
如无特殊要求，电池充放电间隔为30min。
6. Storage and Others 贮存及其它事项
6.1 Long Time Storage 长期贮存
If stored for a long time(exceed three months), the cell should be stored in drying and cooling place. The cell’s storage voltage should be 3.8~4.1V and the cell is to be stored in a condition as No. 4.
长期贮存的电池（超过3个月）须置于干燥、凉爽处。贮存电压为3.8~4.1V且贮存环境要求如附录第4条.
6.2 Others 其它事项
Any matters that this specification does not cover should be conferred between the customer and HUAYU 任何本说明书中未提及的事项，须经双方协商确定
Appendix 附录
Handling Precautions and Guideline
For LIP (Lithium-Ion Polymer) Rechargeable Batteries
聚合物锂离子充电电池操作指示及注意事项
Preface 前言
This document of 'Handling Precautions and Guideline LIP Rechargeable Batteries' shall be applied to the battery cells manufactured by HUA YU New Power Co.,Ltd.
本檔“聚合物锂离子充电电芯操作指示及注意事项”仅适用于华豫电源有限公司生产电芯。
Note (1) ：声明一
The customer is requested to contact HUAYU New Power Co.,Ltd. in advance, if and when the customer needs other applications or operating conditions than those described in this document. Additional experimentation may be required to verify performance and safety under such conditions.
客户若需要将电芯用于超出本规格书规定以外的设备，或在本规格书规定以外的使用条件下使用电芯，应事先联系华豫电源有限公司，因为需要进行特定的实验测试以核实电芯在该使用条件下的性能及安全性。
Note (2)：声明二
对于在超出本规格书规定以外的条件下使用电芯而造成的任何意外事故，华豫电源有限公司概不负责。
Note (3)：声明三
HUAYU New Power Co.,Ltd will take no responsibility for any accident when the cell is used under other conditions than those described in this Document.
如有必要，华豫电源有限公司会以书面形式告知客户有关正确操作使用电芯的改进措施。
1 Charging 充电
1.1 Charging current 充电电流
Charging current should be less than maximum charge current specified in the Product Specification. Charging with higher current than recommended value may cause damage to cell electrical, mechanical, and safety performance and could lead to heat generation or leakage.
充电电流不得超过本规格书中规定的最大充电电流。使用高于推荐值电流充电将可能引起电芯的充放电性能、
机械性能和安全性能的问题，并可能会导致发热或泄漏。
1.2 Charging voltage 充电电压，
Charging shall be done by voltage less than that specified in the Product Specification (4.2V/cell). The charger shall be designed to comply with this condition.
充电电压不得超过本规格书刊号中规定的额定电压（4.2V/电芯）充电器的设计应满足此条件。
It is very dangerous that charging with higher voltage than maximum voltage may cause damage to the cell electrical, mechanical safety performance and could lead to heat generation or leakage.
电池电压高于额定电压值时，将可能引起电芯的充放电性能、机械性能和安全性能的问题，可能会导致发热或泄漏。
1.3 Charging temperature 充电温度
The cell shall be charged within 0℃~45℃range in the Product Specification.
电池必须在0℃~45℃的环境温度范围内进行充电。
1.4 Prohibition of reverse charging禁止反向充电
Reverse charging is prohibited. The cell shall be connected correctly. The polarity has to be confirmed before wiring. In case of the cell is connected improperly, the cell cannot be charged. Simultaneously, the reverse charging may cause damaging to the cell which may lead to degradation of cell performance and damage the cell safety, and could cause heat generation or leakage.
正确连接电池的正负极，严禁反向充电。若电池正负极接反，将无法对电芯进行充电。同时，反向充电会降低电芯的充放电性能、安全性，并会导致发热、泄漏。
2 Discharging 放电
2.1 Discharging current 放电电流
The cell shall be discharged at less than the maximum discharge current specified in the Product Specification. High discharging current may reduce the discharging capacity significantly or cause over-heat.
放电电流不得超过本规格书规定的最大放电电流，大电流放电会导致电芯容量剧减并导致过热。
2.2 Discharging temperature 放电温度
The cell shall be discharged within -10℃~50℃range specified in the Product Specification.
电池必须在-10℃~50℃的环境温度范围内进行放电。
2.3 Over-discharging过放电
It should be noted that the cell would be at an over-discharged state by its self-discharge characteristics in case the cell is not used for long time. In order to prevent over-discharging, the cell shall be charged periodically to maintain between 3.7V and3.9V.
需要注意的是，在电池长期未使用期间，它可能会用其自放电特性而处于某种过放电状态。为防止过放电的发生，电池应定期充电，将其电压维持在3.8V至4.1V之间。
Over-discharging may causes loss of cell performance, characteristics, or battery functions.
过放电会导致电芯性能、电池功能的丧失。
The charger shall be equipped with a device to prevent further discharging exceeding a cut-off voyage specified in the Product Specification. Also the charger shall be equipped with a device to control the recharging procedures as follows: The cell battery pack shall start with a low current (0.01C) for 15 - 30 minutes, i.e. pre-charging, before rapid charging starts. The rapid charging shall be started after the （individual）cell voltage has been reached above 3V within 15 - 30 minutes that can be determined with the use of an appropriate timer for pre-charging. In case the (individual) cell voltage does not rise to 3V within the pre-charging time, then the charger shall have functions to stop further charging and display the cell/pack is at abnormal state.
充电器应有装置来防止电池放电至低于本规格书规定的截止电压。此外，充电器还应有装置以防止重复充电，步骤如下：电池在快速充电之前，应先以一小电流（0.01C）预充电15~30分钟，以使电池的电压达到3.0上，再进行快速充电。可用一记时器来实现该预充电步骤。如果在预充电规定时间内，电池的电压仍未升到3.0V以上，充电器应能够停止下一步快速充电，并显示该电芯/电池正处于非正常状态。
3. Storage 贮存
The cell shall be storied within -5℃~ 45℃range environmental condition.
电芯储存温度必须在-20℃~ 45 ℃的范围内。
If the cell has to be storied for a long time (Over 3 months), the environmental condition should be:
T emperature: 23±5℃
Humidity: 65±20％RH
长期存储电池（超过3个月）须置于温度为23±5℃、湿度为65±20％RH的环境中。
The voltage for a long time storage shall be 3.8V~4.1V range.
贮存电压为3.8V~4.1V。
4. Handling Instructions电池的注意事项
Read and observe the following warnings and precautions to ensure correct and safe use of Li-ion batteries.
认真阅读下面的注意事项，确保正确使用聚合物锂离子电池。华豫对违反下述注意事项而产生的任何问题不予负责。
Danger!
危险！
—Do not immerse the battery in water or allow it to get wet.
—勿将电池投入水中或将其弄湿！
—Do not use or store the battery near sources of heat such as a fire or heater.
—禁止在火源或极热条件下给电池充电！勿在热源（如火或加热器）附近使用或贮存电池！如果电池泄漏或发出异味，应立即将其从接近明火处移开；
—Do not use any chargers other than those recommended by KINGNAIR.
—请使用专用充电器！
—Do not reverse the positive(+) and negative(-) terminals.
—勿将正负极接反！
—Do not connect the battery directly to wall outlets or car cigarette-lighter sockets.
—勿将电池直接连接到墙上插座或车载点烟式插座上！
—Do not put the battery into a fire or apply direct heat to it.
—勿将电池投入火中或给电池加热！
—Do not short-circuit the battery by connecting wires or other metal objects to the positive(+) and negative(-) terminals.
—禁止用导线或其它金属物体将电池正负极短路，禁止将电池与项链、发夹或其它金属物体一起运输或贮存！
—Do not pierce the battery casing with a nail or other sharp object, break it open with a hammer, or step on it.—禁止用钉子或其它尖锐物体刺穿电池壳体，禁止锤击或脚踏电池！
—Do not strike, throw or subject the battery to sever physical shock.
—禁止撞击、投掷或者使电池受到机械震动
—Do not directly solder the battery terminals.
—禁止直接焊接电池端子！
—Do not attempt to disassemble or modify the battery in any way.
— 禁止以任何方式分解电池！
— Do not place the battery in a microwave oven or pressurized container.
— 禁止将电池置入微波炉或压力容器中！
— Do not use the battery in combination with primary batteries(such as dry-cell batteries) or batteries of different capacity, type or brand.
— 禁止与一次电池（如干电池）或不同容量、型号、品种电池组合使用！
—Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any way. If the battery is in use or being recharged, remove it from the device or charger immediately and discontinue use.
— 如果电池发出异味、发热、变形、变色或出现其它任何异常现象时不得使用；如果电池正在使用或充电，应立即从用电器中或充电器上取出并停止使用！
Caution!
注意！
Do not use or store the battery where is exposed to extremely hot, such as under window of a car in direct sunlight in a hot day. Otherwise, the battery may be overheated. This can also reduce battery performance and/or shorten service life.
不要使用处于极热环境中的电池，如阳光直射或热天的车内。否则，电池会过热，可能着火（点燃），这样就会影响电池的性能、缩短电池的使用寿命。
If the battery leaks and electrolyte gets in your eyes, do not rub them. Instead, rinse them with clean running water and immediately seek medical attention. If left as is, electrolyte can cause eye injury.
如果电池漏液后电解液进入眼睛，不要擦，应用水冲洗，立即寻求医疗救助。如不及时处理，眼睛将会受到伤害。
Use the battery only under the following environmental conditions. Failure to do so can result in reduced performance or a shorten service life. Recharging the battery outside of these temperatures can cause the battery to overheat, explode or catch fire.
只能在下述条件下使用电池，否则将会降低电池的性能或缩短电池的使用寿命。
Operating environment:
工作环境
When charging the battery: 0℃～45℃
充电：0℃～45℃
When discharging the battery: -20℃～60℃
放电: -10～50℃
When stored up to 30 days: -5℃～+45℃
储存30天：-20℃～+45℃
When stored up to 90 days: -5℃～+35℃
储存90天：-20℃～+35℃
When stored up to 180 days: 0℃～+35℃
储存180天：-20℃～+25℃
6.Amendment of this Specification产品规格书的修订
This specification is subject to change with prior notice.
本公司有权对本产品规格书进行修订，在对产品规格书修订后华豫有限公司将会通知客户。
储能型磷酸铁锂电池规格书STORAGE LiFePO4 BATTERY SPECIFICATIONS 客户名称(Customer)： 产品型号(Type)： CF12V80Ah 发行日期(Issuing Date)：
1. 适用范围(Product Scope) 本规格书描述了锂离子二次电池的技术要求、测量方法、运输、储存及注意事项。 This Specification describes the requirements of the lithium ion rechargeable battery supplied by 2. 电池组特性 (Battery Group Specifications)
单只电芯曲线图feature curve for single cell 3. 技术要求(Technical Requirements) 测试条件(除特别规定) Testing Conditions (unless otherwise specified) 温度Temperature: 15~35℃ 相对湿度Relative Humidity: 45%~75% 大气压Atmospheric pressure: 86~106Kpa 充放电性能 (Electrical Characteristics)
环境性能 (Environmental Characteristic) 机械性能(Mechanical characteristics)
安全性能(Safe Characteristic)
4 电池组基本性能 (Basic Characteristics of Battery) 5 电池组保护功能要求 (Battery Required Protection Functions) To insure the safety, charger and the protection circuit shall be satisfied the items below. As safety device, please use in combination with the temperature fuse. The standard charge method is CC/CV (constant current/constant voltage) 为确保安全,充电器和保护电路应符合以下要求。同时请使用装有热熔保险丝的安全装置。标准充电方法为CC/CV(恒流/恒压)
聚合物锂离子电池 产品规格承认书 ：：JD220768430F（500Ah） 品名： 品名 编制审核批准 客户确认 签名//日期客户名称//印章签名 客户名称 总部：北京神州巨电新能源技术开发有限公司 Beijing Globe Super Power New Energy Technology Development Corp. 地址：中国北京市海淀区上地3街9号嘉华大厦E座206 ADD:Rm E-206,Gem Tech-Center,No.9,3rd Street,Haidian Dist.,Beijing,P.R.China 86-10--82783543-816Fax:86-10 86-10--82780720-1073 Tel:86-10 工厂：河北神州巨电新能源科技开发有限公司 Hebei Globe Super Power New Energy Technology Development Corp. 地址：河北邢台市巨鹿县巨鹿工业园 Hebei i Province,P.R.China ADD:Industrial District,Ju Jul l u,Xiangtan,Hebe
产品规格承认书 目录 1.适用范围---------------------------------------------------------------------------------------------------------2 2.产品规格---------------------------------------------------------------------------------------------------2 3.电池性能检查测试-----------------------------------------------------------------------------------------2 4.外观尺寸图------------------------------------------------------------------------------------------------------3 5.使用指南--------------------------------------------------------------------------------------------------------3 6.其它事项------------------------------------------------------------------------------------------------------4 7.电芯处理须知---------------------------------------------------------------------------------------------------4
充电器规格书 Specification of Battery Charger 型号:ES2406S 6A 锂电池充电器 （全铝外壳） / 6A Li Iron/Li Polymer BATTERY CHARGER 1.概述 General 此型号2406S 155×90×50mm的铝质外壳充电器能在输出6A的情况下工作，具有反接保护功能。 Battery Charger 2406S 155×90×50mm can work normally under 6A and with reverse polarity protection. 2.主要参数
Main product specification 3.环境条件 Environmental condition 4.技术特征 Electrical characteristics 输入特征： Input characteristic 输出特征和充电模式：
Output characteristic or charge stages 保护特征： Protection characteristics
充电指示 Charging indicator 5.安全性 Safety & EMC
备注：辨识A：在技术要求范围内，充电器功能正常； Remark: Discrimination A- Function OK under technical requirement range; 辨识R：只有由外部干扰信号引起的保护装置（保险丝）损坏，整个设备在更换保护装置和重设运行参数后才能正常工作，因机械性损坏和设备故障的设备却不能。 Discrimination R- Physical damage or failure of equipment are not allowed, but damage of protection device (fuse) caused by interference signal of outside is allowed, and the whole equipment can work normally after replacement of protection device and reset of running parameter 6.环境测试要求 Environmental testing requirements
1.概述 General 此型号2406S 155×90×50mm的铝质外壳充电器能在输出6A的情况下工作，具有反接保护功能。 Battery Charger 2406S 155×90×50mm can work normally under 6A and with reverse polarity protection. 2.主要参数 Main product specification
3.环境条件 Environmental condition 4.技术特征 Electrical characteristics 输入特征： Input characteristic 输出特征和充电模式： Output characteristic or charge stages 保护特征： Protection characteristics
充电指示 Charging indicator 5.安全性 Safety & EMC
备注：辨识A：在技术要求范围内，充电器功能正常； Remark: Discrimination A- Function OK under technical requirement range; 辨识R：只有由外部干扰信号引起的保护装置（保险丝）损坏，整个设备在更换保护装置和重设运行参数后才能正常工作，因机械性损坏和设备故障的设备却不能。 Discrimination R- Physical damage or failure of equipment are not allowed, but damage of protection device (fuse) caused by interference signal of outside is allowed, and the whole equipment can work normally after replacement of protection device and reset of running parameter 6.环境测试要求 Environmental testing requirements 7.机械特征
储能型磷酸铁锂电池规格书 STORAGE LiFePO4 BATTERY SPECIFICATIONS 客户名称(Customer)： 产品型号(Type)： CF12V80Ah 发行日期(Issuing Date)： 1. 适用范围(Product Scope) 本规格书描述了锂离子二次电池的技术要求、测量方法、运输、储存及注意事项。 This Specification describes the requirements of the lithium ion rechargeable battery supplied by Prepared 制定 Checked 审核 Approved 批准
2. 电池组特性(Battery Group Specifications) Cell 电芯 Model规格型号IFP8081230-10Ah Capacity容量10 Ah Rated Voltage 标称电压 3.2 V Internal Resistance 内阻标准≤4 mΩ Combination Standard配组标准 A. 容差Capacity Difference≤1% B. 内阻Resistance()=1～2 mΩ C. 荷电保持能力Current-maintaining Ability≥90% D. 电压Voltage3.3～3.4V Combination Method组合方式4串8并4S 8P Pile Index 成品参数 Rated Capacity 标称容量80.0Ah Minimal Capacity最小容量（0.3C5A）80.0Ah Nominal Voltage额定电压12.0V Max. Charge Voltage 最大充电电压14.8 V Discharge cut-off voltage放电截止电压10.0V Charge Current充电电流5-10A Working Current工作电流10-20A Output and Inpu t输出端与输入端P+(red) / P-(black) Weight电池重量9.2Kg Dimension外形尺寸（L×W×H）168×260×132mm(不包含外露开关) Charge Method 适用充电 Standard标准5A×16hrs Quick快速20A×4hrs. Operating Temperature 适用温度 Charge充电0℃～45℃；32o F～113o F Discharge放电-20℃～60℃；-4o F～149o F
TEL:( 0752)3535208 FAX:( 0752)3761580 Date：2017-3-30 Specification Approval Sheet 产品规格承认书 Customer 客户名称：域拓 Model产品型号：4L Type 产品类型：Li-ion battery Specification产品规格：3.7V/1400mAH signed by client 客户签名 Confirmed确认： Checked 审核： Approved 批准： signed by manufacturer 生产商签名 Prepared 制定：肖泽建 Checked 审核： Approved 批准：丁明谊 AMENDMENT RECORDS
TEL:( 0752)3535208 FAX:( 0752)3761580 Date：2017-3-30 Modification Time Description Issued Date Approved By 0 New release2015-06-26
TEL:( 0752)3535208 FAX:( 0752)3761580 Date：2017-3-30 Catalogue 目录 1 .Battery type and scope电池型号和适用范围 (4) 1 . 1: model产品型号： (4) 1 . 2: scope适用范围：客户定义 (4) 2 . Basic character and compose of battery电池的基本特性及组成 (4) 2 . 1: fundamental performance parameter of battery电池基本性能参数： (4) 2 . 2: Main components and parts主要零部件 (6) 2 . 3: Regular performance and unfailing performance产品常规性能和可靠性能 (6) 2 . 4: Contour Dimension of the Battery电池外形尺寸 (11) 3 . Specifications of Parts零部件规格 (112) 3 . 1: fender保护板 (122) 3 . 2: general electric and protection characters一般电气与保护特征 (122) 3 . 2: electric schematic diagram of battery电池电路原理图： (133) 3 . 3 : PCB layout 电路布局图………………………………………………………………….错误！未定义书签。3 4 . Specifications of the Cells电芯规格 (144) Announcements注意事项 (155) Danger 危险 (155) Warnings 警告 (166) Announcements 注意事项 (167)
Title Li-ion Battery Specifications (Steel) File No: QP-09-E167-NH Version NO:B/0 Presentation: Lithium-Ion Battery Cell Specification Classification: Sony batteries Cell Type: ICR18650NH June 24, 2008 Technology Department Battery Technical Service Department Prepared Checked Approved Customer Approval (Date) Control code：0806016
Revision Date Originator Description B/0 2008-6-24 Engineering Center Original Release Title Li-ion Battery Specifications (Steel) Revision History File No: QP-09-E167-NH Version NO :B/0 ICR18650NH Engineering Center
Item Specification Remarks 4.1Typical capacity2600mAh0.2 C5A discharge 4.2Minimum Capacity2500mAh 4.2 Nominal Voltage8.4V 4.3 Discharging Voltage (Min)7.4V 4.4 Charging Voltage (Max.)8.4±0.1V 4.5 Charging Current（Std.）0.5 C 5 A 4.6 Discharging Current（Std.）0.2 C 5 A 4.7 Charging Current (Fast） 1 C 5 A0 ~ 40°C, <95%RH 4.8 Discharging Current（Fast） 1 C 5 A 4.9 Discharging Current（Max.） 2 C 5 A 4.10 Internal Impedance≤200m? 4.11 Weight100±2.0g 4.12 Outline dimension (see figure)width φ38±0.2mm (Including PVC) Length68±0.5mm 4.13 Battery cell storage and transportation environment and temperature ranges Min 1 Month-20 ~ +60°C, <75%RH*Initial status of cell 3.80V and 50% of charge, the capacity lost during shipment < 20%. Capacity recover rate > 80%. Min 3 Months-20 ~ +45°C, <75%RH* Min 12 Months-20 ~ +25°C, <75%RH* Title Li-ion Battery Specifications (Steel)Page1/11 1. Scope This Specification is applied to rechargeable lithium ion battery cell of the following mentioned type for various applications in mobile communication devices and portable power systems. 2. Cell Classification and Type 2.1 Cell Classification：Lithium Ion Battery Cell 2.2 Cell Type：ICR18650NH 3. Standard The specification is based on the technical specification of GB/T18287-2000 、UL1642 and IEC61960. 4. Nominal Specification File No: QP-09-E167-NH Version NO:B/0ICR18650NH Engineering Center
产品规格书 产品名称：锂离子电池 产品型号：HTCF18650-1500mAh-3.2V 制订:周会 审核:李涛 批准:
目录 1. 适用范围 (3) 2. 型号 (3) 3. 外观及尺寸 (3) 4. 主要技术参数 (3) 5. 性能曲线 (4) 6. 安全性能 (5) 7. 环境适应性能 (6) 8. 标准测试环境 (6) 9. 储存及其它事项 (6) 10. 电池使用操作注意事项 (6)
1. 适用范围 本产品规格书描述了海特电子集团有限公司（以下简称海特电子）生产的锂离子电池产品性能指标。 2. 型号 HTCF18650-1500mAh-3.2V 3. 外观及尺寸 项目尺寸(mm) 直径（Ф）18.2±0.1 高度（H）64.8±0.4 4. 主要技术参数 序号项目标准 备注 1 标称容量1500mAh 0.5C，（本型号1C电流值为1500mA） 2 容量范围1450~1550mAh 0.5C 3 标称电压 3.2 V 4 交流内阻≤60mΩ加PTC型 5 充电 条件 截止电压 3.65±0.05V 以0.5C恒流充电至3.65V，恒压充电至电 流降至0.01C截止截止电流0.01C 6 放电截至电压 2.5V 7 循环性能2000次1C充电/1C放电，容量保持率≥80%，100%DOD 8 最大持续放电电流 4.5A 9 脉冲放电电流10A，5s 10 工作温度充电：0°C ~ 55°C；放电：-20°C ~ 60°C 11 储存温度-20°C ~ 45°C 12 电池重量42g (约)
5. 性能曲线 18650-1500mAh-3.2V电池0.5C充放电曲线 2 2.22.42.62.83 3.23.43.63.80 200 400 600 800 1000 1200 1400 1600 1800 容量/mAh 电压/V 充电放电 18650-1500mAh-3.2V 不同倍率放电曲线 2 2.32.62.9 3.23.53.80 200 400 600 800 10001200140016001800 容量/mAh 电压/V 0.1C 0.2C 0.5C 1C 2C 3C 18650-1500mAh-3.2V 不同温度放电曲线（0.5C） 1 1.52 2.53 3.540 300 600 9001200 1500 1800 容量/mAh 电压/V 60℃30℃10℃0℃-10℃-20℃-40℃
锂电池产品说明书中英文对照版 手机锂电池 用户使用说明书 版权 版权 ? 2013 诺希电子产品本使用说明书受国际版权法保护。 感谢您购买及使用 ? 手机锂电池 加强版电池 标准版电池 为了确保本产品为您的手机戒电子产品提供幼稚的使用效果。请仔细阅读本使用说明书,同时也请参阅您的手机戒电子产品使用指南。 2 目录 产品特 色 ..................................................................... ................................................. 4 使用说 明 ..................................................................... ................................................. 5 警 告 ..................................................................... (6) 用户注 意 .....................................................................
................................................. 6 如何处理废弃电子产品 ..................................................................... ......................... 6 保养条 款 ..................................................................... . (7) 3 产品特色 NOHOH高容量锂电池系列产品是一款超强电量,安全稳定,环保耐用的优质产品。 超强电量:采用高密度物料的高容量电芯,制成超级电量的顶级锂电池产品。 安全稳定:所有的锂电池都没有防过冲、防过冲及防短路的精密保护装置,可以保护在意外情况精准启动保护功效。 耐用:NOHON锂电池产品内阻低储电量高,无论待机状态戒者通话时间都比一般锂电池产品更长。 环保:锂电池产品充电次数可达五百次以上,这样可大大减低更换电池次数,既节省费用同时更达至环保减排作用。 国际标准:NOHON所有锂电池产品不含有镉、铅、汞等污染环境的金属,完全符合国际标准。 1930 毫安超大电量电池正负极
地址：广东省深圳市坪山新区金荔科技园4栋 TEL：86（0）0755-2308 8336 FAX：86（0）0755-2308 8396 DATE: 2015/11/04 Cylindrical LIFEPO4 Battery Specification 圆柱型磷酸铁锂电池规格书MODEL/型号: IFR 14500-500mAh 3.2V Prepared By/Date 编制/日期Checked By/Date 审核/日期 Approved By/Date 批准/日期 冯时春/2015.11.04 Customer Approval 客户批准 Signature 确认 Date 日期 Company Name： 公司名称： Company Stamp： 客户印章： --- 保密文件---
地址：广东省深圳市坪山新区金荔科技园4栋 TEL：86（0）0755-2308 8336 FAX：86（0）0755-2308 8396 DATE: 2015/11/04 Amendment Records （修正记录） Edition (版本) Description （记述） Prepared by （编制） Approved by （批准） Date （日期） A First Publish 冯时春2015/11/04
地址：广东省深圳市坪山新区金荔科技园4栋 TEL：86（0）0755-2308 8336 FAX：86（0）0755-2308 8396 DATE: 2015/11/04 1 Scope（适用范围） This specification is applied to the reference battery in this Specification that manufactured by Yinkai Power Technology Co., Ltd. 本说明书适用于本书中所提及的银凯动力科技有限公司制造的电池。 2 Product Specification（产品技术规格） Table 1 (表1) No. (序号) Item （项目） General Parameter (常规参数) Remark （备注） 1 Rated Capacity （额定容量） Typical （标称容量） 500mAh Standard discharge（0.2C 5 A) after Standard charge （标准充电后0.2C5A标准放电） Minimum (最小容量) 475mAh 2 Nominal Voltage （正常电压） 3.2V Mean Operation Voltage （即工作电压） 3 Voltage at end of Discharge （放电终止电压） 2.0V Discharge Cut-off Voltage （放电截止电压） 4 Charging Voltage (充电电压) 3.65V 5 来料电压≥3.3V 6 Internal Impedance (内阻) ≤80mΩ Internal resistance measured at AC 1KH Z after 50% charge （半电态下用交流法测量内阻） The measure must uses the new batteries that within one week after shipment and cycles less than 5 times (使用出货后不到一个星期及循 环次数少于5次的新电池测量) 7 Standard charge （标准充电） Constant Current 0.2C5A Constant Voltage 3.65V 0.01 C cut-off （持续电流：0.2C5A 持续电压：3.65V 截止电流：0.01 C） 8 Standard discharge （标准放电） Constant current 0.2C5A end voltage 2.0V （持续电流：0.2C5A 截止电压：2.0V）
Specification for Li-ion Rechargeable cylindrical battery 圆柱锂离子电池规格书 MODEL/型号: 18650-2200mAh
1.0 SPECIFICATIONS基本特性 2.0 CONFIGURATION外形图 Diameter Height
3.0 The definitions of some nomenclatures of this specification标准中的一些术语的定义： （1）Standard Charge: Charge with current 0.5C5A to limit charge voltage 4.2V under the condition of 25℃±5℃surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.01 C5A. 标准充电：在环境温度20℃±5℃的条件下，以0.5C5A充电，当电池端电压达到充电限制电压4.2V时，改为恒压充电，直到充电电流小于或等于0.01C5A后停止充电 （2）Initial State: The initial appearance, open-circuit voltage and internal resistance of battery. 初始状态：电池的初始外观、开路电压、交流内阻。 （3）Final State: The final appearance, open-circuit voltage and internal resistance of battery. 最终状态：电池的最终外观、开路电压、交流内阻。 （4）Residual Capacity: After a specific testing program, the first discharge capacity of battery. 剩余容量：电池经过特定的检测程序后的首次放电容量。 （5）Recovery capacity: After a specific testing program,and through the repeatedly charging and discharging to the recovery state, then the discharge capacity of battery. 恢复容量：电池经过特定的检测程序后，通过反复充放电使状态恢复后的放电容量。 （6）0.5 C5A /1 C5A (0.5 C5A /0.5 C5A, 0.5 C5A /0.2 C5A）：Charge at 0.5C5A to limit charge voltage 4.2V, then change to charge with constant voltage until the current less than or equal to 0.01 C5A, rest for 5 min, then discharge at 1C5A(0.5 C5A, 0.2C5A) to 2.75V cut-off. 0.5C/1C（0.5C/0.5C、0.5C/0.2C）：以0.5C5A充电，当电池端电压达到充电限制电压4.2V时，转为恒压充电， 直到充电电流小于或等于0.01C5A停止充电，充电完成后，搁置5min，再以1C5A（0.5 C5A、0.2C5A）恒流放电至终止电压3.00V。 4.0 CHARACTERISTICS电池性能 4.1 Electrochemical Performance电化学性能 4.1.1 Discharge Characteristics (Room Temperature) 常温放电性能 Test Method: At standard atmospheric pressure, ambient temperature 25℃±5℃, relative humidity 45％～80％（The following if no specific instructions are all in these conditions, according to this charging ways）, after 0.5 C5A standard charged, rest for 15min and then discharge at 0.2C5A, 0.5C5A, 1C5A and 2C5A to the discharge cut-off voltage 2.75V respectively. Charge/discharge cycle can be conducted for 3 times before meeting the Standards（the same below）. 测试方法：在1标准大气压，环境温度25℃±5℃，相对湿度为45％～80％的条件下，电池0.5C标准充电后（以下若没有特别说明，均在此条件下放置，皆按此充电方式），搁置10min，分别以0.2C5A、0.5C5A、1C5A、2C5A进行放电至下限电压2.75V，循环三次，当有一次达到标准，即达到标准要求（下同）。 Standard：Discharge capacity / Nominal capacity *100％ A）0.2C5A ≥100％ B）0.5C5A ≥98％ C）1C5A ≥95％ D）2C5A ≥85％ The charging and discharging curves must be smooth 标准：放电容量/标称容量×100％ A）0.2C5A ≥100％ B）0.5C5A ≥98％ C）1C5A ≥95％ D）2C5A ≥85％ 充放电曲线应平稳光滑 4.1.2 Normal Storage常温荷电保持能力 Test Method: Tested the initial condition and initial capacity of battery. Store for 28 days after standard charged, tested the final condition of battery. Then discharge at 0.5C5A to the discharge cut-off voltage 2.75V, tested the residual capacity of battery. 0.5C5A /0.5 C5A tested the recovery capacity of battery.Charge/discharge cycle can be conducted for
锂离子二次电池 型号: 454060AP 1000mAh 销售部地址： 电话：（86）0755- 传真：（86）0755- 工厂地址： 电话:（86）传真:（86） 网址： 目录
●封面 (1) ●目录 (2) ●适用范围 (3) ●引用标准 (3) ●产品类型 (3) ●产品规格 (3) ●外观 (3) ●性能 (3) ●常规性能 (4) ●环境适应性能 (5) ●安全性能 (6) ●技术和安全要求 (6) ●包装、储存及运输 (7) ●保质期限 (7) ●电池使用时警告及注意事项 (8) ●附：产品外形图 (9) 1、适用范围：本产品规格适用于能源实业有限公司生产的二次锂离子电池主要性能指标 的描述，此此份说明书仅适用于单体电池，用户请务必严格按说明书中的测试或使用方法进行使用，如有不明的事项，请与供应方协商解决。
2、引用标准：GB/T18287-2000 3、产品类型、型号和外形尺寸 3.1 产品类型：二次锂离子电池 3.2 产品型号： 3.3 电芯外观尺寸（Max）: 厚×宽×长（mm) 4、产品规格： 5、外观 表面没有如脏污、严重擦伤、漏液、凹点和变形等缺陷。 6、性能 6.1、标准测试条件 无其他指定时，按 GB/T18287-2000 标准测试条件。 本规格书中所有的测试均在 23±2℃（温度）、65±20％RH（湿度）下进行；如果测试结果与要求条件无关，则也可以在 15～30℃(温度)、25～85％RH（湿度）下进行。(潮湿中进行测试会影响测试结果) 6.2、测试的手段和仪器 6.2.1、测量尺寸的工具 用 0.01mm 或更精确的工具来测量尺寸,其量程为 0-200mm. 6.2.2、电压表和电流表 电压表的精确度为±5mv,其量程为 0-20V;电流表的精确度为当前电流±0.3%.
NOHON? 手机锂电池 用户使用说明书 版权 版权? 2013 诺希电子产品 本使用说明书受国际版权法保护。
感谢您购买及使用NOHON? 手机锂电池 加强版电池 标准版电池 为了确保本产品为您的手机或电子产品提供幼稚的使用效果。请仔细阅读本使用说明书，同时也请参阅您的手机或电子产品使用指南。
目录 产品特色 (4) 使用说明 (5) 警告 (6) 用户注意 (6) 如何处理废弃电子产品 (6) 保养条款 (7)
产品特色 NOHOH 高容量锂电池系列产品是一款超强电量，安全稳定，环保耐用的优质产品。 超强电量：采用高密度物料的高容量电芯，制成超级电量的顶级锂电池产品。 安全稳定：所有的锂电池都没有防过冲、防过冲及防短路的精密保护装置，可以保护在意外情况精准启动保护功效。 耐用：NOHON 锂电池产品内阻低储电量高，无论待机状态或者通话时间都比一般锂电池产品更长。 环保：锂电池产品充电次数可达五百次以上，这样可大大减低更换电池次数，既节省费用同时更达至环保减排作用。 国际标准：NOHON 所有锂电池产品不含有镉、铅、汞等污染环境的金属，完全符合国际标准。 【电池正面背面侧面展示：电池尺寸为63.5×41×5.99mm 】 电池正负极 1930 毫安超大电量
使用说明 1. 我们建议您在首次使用此NOHNO电池前，将电池完全充电。 2. 新电池只有在二、三次完全充电和放电的周期之后才能达到最佳性能。 3. 请勿将充满电量的电池连接至充电器因为过分充电可能会缩短电池寿命。 4. 如果您打算长时间不使用电池时，请必须将电池拆下，并存放在低温干燥的环境，而且电池必须充满。电池即使未使用也会自动放电，应避免电池过分放电处于低电状态导致无法再度充电。 5. 请使用NOHON为此电池设计的充电器充电。 6. 请不要放于充电座上充电超过24小时，不使用时将充电器从电源插头及装置中拔出。 7. 请不要把电池留在过热或过冷的地方（如夏天或冬天的密封车厢中），会缩短电池电容量及寿命。 8. 请尽量将电池的温度保持在15摄氏度至25摄氏度之间。 9. 个别电池型号附有透明拉带，此拉带有助将电池轻易拉出，请勿将电池拉带剪掉. 10. 如果装上过热或过冷的电池时，即使电池电量已饱和，手机也可能在暂时无法操作。 11. 如果电池已完全放电，可能要过几分钟指示符号才会出现在荧幕上或才能打电话。 12. 如果用电池是第一次使用或电池长时间内没有使用，开始为电池充电时，可能要将电池连接至充电器，断开，然后再连接。
Nanophosphate? High Power Lithium Ion Cell ANR26650M1-B
KEY FEATURES AND BENEFITS
Excellent abuse tolerance and superior cycle life from A123’s patented Nanophosphate? lithium ion chemistry High power with over 2,600 W/kg and 5,800 W/L, 10 seconds, 50% SOC High usable energy over a wide state of charge (SOC) range
ANR26650M1-B Cell Speci cations
Cell Dimensions (mm) Cell Weight (g) Cell Capacity (nominal/minimum, Ah) Voltage (nominal, V) Internal Impedance (1kHz AC typical, m ) HPPC 10 Sec Discharge Pulse Power 50% SOC Recommended Standard Charge Method Recommended Fast Charge Method to 80% SOC Maximum Continuous Discharge (A) Maximum Pulse Discharge (10 seconds, A) Cycle Life at 10C Discharge, 100% DOD 26 x 65 76 2.5/2.4 3.3 6 200 W 1C to 3.6V CCCV, 45 min 4C to 3.6V CC, 12 min 70 120 >1,000 cycles
DIMENSIONS IN MM * with sleeve 25.96 +/- 0.50 mm
12.90
25.85*
+ 0.30 – 0.30
65.15
+ 0.50 – 0.00
15.00
Operating Temperature Storage Temperature
-30°C to 55°C -40°C to 60°C
APPLICATIONS
Transportation Commercial Electric Grid
Advanced energy storage for electric drive vehicles
https://www.doczj.com/doc/6116623337.html,
Enabling next-generation commercial products
Dynamic energy solutions for a smarter grid
?2011 A123 Systems, Inc. All rights reserved. MD100113-01