冲压模具设计外文翻译
摘录：
在这一篇论文中，对滚动接触机械装置上的滚动接触体结构柔性变形的效果简短地分析。轮副和轨道对轮的潜变力的结构变形的效果和轨条详细地被分析研究。轮副的一般结构柔性变形和轨道首先分别用有限元的机械要素方法和关系一起分析,从而获得表达滚动方向和轮副的横方向的结构柔性变形和对应的负载。按照它们之间的关系,我们计算轮和轨条的在一点相接接触的影响力系数。影响力系数代表发生在轮/轨道接触的一个小的矩形面积上的单位面积的牵引力引起的结构柔性变形。他们习惯校订一些与Kalker的无赫兹的形状滚动接触的三维空间的有柔性体的理论Bossinesq 和Cerruti 的公式一起获得的影响力系数。在潜变力的分析中, 利用了修正的 Kalker 的理论。从轮副和轨道的结构柔性变形中获得的数字结果表明潜变力发挥的很大影响力。
2002 Elsevier 科学出版社版权所有。
关键字: 轮/轨条; 滚动接触;潜变力;柔性变形结构
1.介绍
由于火车轮副和轨道之间的很大相对运动作用力引起轮副和轨道的结构较大的柔性变形。大的结构变形极大影轮和轨条响滚动接触的性能,如潜变力，波形 [1 – 3] ，黏着，滚动接触疲劳, 噪音 [4,5] 和脱轨[6]等等. 到现在为止在轮/ 轨道的潜变力的分析中广泛应用的滚动接触理论是以柔性一半的空间假定为基础的 [7 –12]. 换句话说，轮/ 轨道的一个接触的柔性变形和牵引之间的关系可以用Bossinesq和 Cerruti的理论公式表达。实际, 当轮副在轨道上持续运动,接触的柔性变形是比那些以滚动接触的现在理论公式计算的更大。因为轮副/ 轨道的挠性是比柔性一半的空间更加大。由对应的负荷所引起的轮副/ 轨道柔性变形结构在图中被显示。如 1 和 2. 在图中轮副弯曲变形被显示出来。在图 1a 中被显示的轮副弯曲变形主要由车辆和轮副/轨条的垂直动载荷所引起。在图 1 b 中描述的轮副扭转的变形是由于轮和轨道之间的纵潜变力的作用生产的。在图 1 c 中显示的轮副斜角弯曲变形和在图 2 中显示的轨道翻折变形主要地由交通工具和轮副/轨道的横动态负荷所引起。在轮副 (图 1 d) 的轴周围的和旋转装置相同方向的扭转变形,火车可以使用的,主要在电动机的轮/ 轨条和驱动扭矩的接触补缀上的牵引所引起。到目前为止很少的出版物讨论滚动接触的轮副和轨道之间的爬动和潜变力的效果。
事实上，上面提到轮副/ 轨道的柔性变形结构是在轮/轨道的常态和切线的接触刚性以下运动。轮/ 轨道的正常的接触点的刚性通常低于轨道的下沉位置。
低于正常接触点的刚性很少的影响接触面积上的正常压力。那低于切线的接触刚性很大影响接触面积的黏结/ 滑移面积状态和牵引力。如果滚动接触的柔性变形结构的影响被对于轮/轨道的分析考虑进去，一对接触面积的全体微粒滑移与用现在滚动接触理论计算的结果不同。所有的连络颗粒和摩擦功的总的滑移比那在分析轮/轨道浅动力的时候，被忽略的柔性变形结构更小。同样一个接触面积的根/ 转差面积的比率比没有考虑的柔性变形结构的效果更大。在这一篇论文中，在滚动接触性能上的滚动接触的车体柔性变形机构的装置被简短地分析，而且和
Kalker''''s 无赫兹的形状滚动接触的三度空间的有柔性车体的理论模型用来分析在轮副和轨道之间的潜变力。在数值分析中挑选的轮副和轨条分别地,是货车轮副的锥形轮廓，中国 "兆位元组" 和钢轨条的质量是60 公斤/m 。有限元分析方法用来决定他们的柔性变形结构。依照柔性变形结构的关系和对应的由于FEM 获得负荷, 表示轮副的柔性变位的影响系数是由轮/ 轨条的接触单位面积密度有所反应的牵引生产的轨条所决定。这些影响系数用来代替一些与
Kalker''''s 的理论 Bossinesq 和 Cerruti 的公式一起计算的影响系数。在图1a 中被显示的轮副弯曲变形的效果和在轮副轨道的柔性变形结构之中的横断的影响力在研究中被疏忽。获得的数字结果表明在轮副/轨道柔性变形结构的潜变力效果考虑和疏忽的条件之间的显着差别。
In this paper the mechanism ofeffects of structure elastic deformations of bodies in rolling contact onrolling contact performance is briefly analyzed. Effects of structuredeformations of wheelset and track on the creep forces of wheel and rail are investigatedin detail. General structure elastic deformations of wheelset and track arepreviously analyzed with finite element method, and the relations, whichexpress the structure elastic deformations and the corresponding loads in therolling direction and the lateral direction of wheelset, respectively, areobtained. Using the relations, we calculate the influence coefficients oftangent contact of wheel and rail. The influence coefficients stand for theoccurring of the structure elastic deformations due to the traction of unitdensity on a small rectangular area in thecontact area of wheel/rail. They areused to revise some of the influence coefficients obtained with the formula ofBossinesq and Cerruti in Kalker’s theory of three-dimensional elastic bodies inrolling contact with
non-Hertzian form. In the analysis of the creep forces,the modified theory of Kalker is employed. The numerical results obtained showa great influence exerted by structure elastic deformations of wheelset andtrack upon the creep forces.
? 2002 Elsevier Science B.V. Allrights reserved.
Keywords:Wheel/rail; Rolling contact; Creep force; Structureelastic deformation 1.Introduction
During running of a train on track the fierce action between wheelset andrails causes large elastic deformations of structure of wheelset and track. Thelarge structure deformations greatly affect performances of wheels and rails inrolling contact, such as creep forces, corrugation [1–3], adhesion, rollingcontact fatigue, noise [4,5] and derailment [6]. So far rolling contacttheories widely used in the analysis of creep forces of wheel/rail are based onan assumption of elastic half space [7–12]. In other words, the relationsbetween the elastic deformations and the traction in a contact patch ofwheel/rail can be expressed with the formula of Bossinesq and Cerruti in thetheories. In practice, when a wheelset is moving on track, the elasticdeformations in the contact patch are larger than those calculated with
thepresent theories of rolling contact. It is because the flexibility ofwheelset/rail is much larger than that of elastic half space. Structure elasticdeformations (SED) of wheelset/rail caused by the corresponding loads are shownin Figs. 1 and 2. The bending deformation of wheelset shown in Fig. 1a ismainly caused by vertical dynamic loads of vehicle and wheelset/rail. Thetorsional deformation of wheelset described in Fig. 1b is produced due to theaction of longitudinal creep forces between wheels and rails. The obliquebending deformation of wheelset shown in Fig. 1c and the turnover deformationof rail shown in Fig. 2 are mainly caused by lateral dynamic loads of vehicleand wheelset/rail. The torsional deformations with the same direction ofrotation around the axle of wheelset (see Fig. 1d), available for locomotive,are mainly caused by traction on the contact patch of wheel/rail and drivingtorque of motor. Up to now very few published papers have discussions on theeffects of the SED on creepages and creep forces between wheelset and track inrolling contact.
In fact, the SED of wheelset/railmentioned above runs low the normal and tangential contact stiffness ofwheel/rail. The normal contact stiffness of wheel/rail is mainly lowed by thesubsidence of track. The normal contact stiffness lowed doesn’t affect thenormal pressure on the contact area much. The lowed tangential contactstiffness affects the status of stick/slip areas and the traction in thecontact area greatly. If the effects of the SED on the rolling contact aretaken into account in analysis of rolling contact of wheel/rail, the total slipof a pair of contacting particles in a contact area is different from thatcalculated with the present rolling contact theories. The total slip of all thecontacting particles and the friction work are smaller than those obtainedunder
工业设计原著选读 优秀的产品设计 第一个拨号电话1897年由卡罗耳Gantz 第一个拨号电话在1897年被自动电器公司引入，成立于1891年布朗强，一名勘萨斯州承担者。在1889年，相信铃声“中央交换”将转移来电给竞争对手，强发明了被拨号系统控制的自动交换机系统。这个系统在1892年第一次在拉波特完成史端乔系统中被安装。1897年，强的模型电话，然而模型扶轮拨条的位置没有类似于轮齿约170度,以及边缘拨阀瓣。电话，当然是被亚历山大格雷厄姆贝尔（1847—1922）在1876年发明的。第一个商业交换始建于1878（12个使用者），在1879年，多交换机系统由工程师勒罗伊B 菲尔曼发明,使电话取得商业成功,用户在1890年达到250000。 直到1894年，贝尔原批专利过期，贝尔电话公司在市场上有一个虚拟的垄断。他们已经成功侵权投诉反对至少600竞争者。该公司曾在1896年，刚刚在中央交易所推出了电源的“普通电池”制度。在那之前，一个人有手摇电话以提供足够的电力呼叫。一个连接可能仍然只能在给予该人的名义下提出要求达到一个电话接线员。这是强改变的原因。 强很快成为贝尔的强大竞争者。他在1901年引进了一个桌面拨号模型，这个模型在设计方面比贝尔的模型更加清晰。在1902年，他引进了一个带有磁盘拨号的墙面电话，这次与实际指孔，仍然只有170度左右在磁盘周围。到1905年，一个“长距离”手指孔已经被增加了。最后一个强的知名模型是在1907年。强的专利大概过期于1914年，之后他或他的公司再也没有听到过。直到1919年贝尔引进了拨号系统。当他们这样做，在拨号盘的周围手指孔被充分扩展了。 强发明的拨号系统直到1922年进入像纽约一样的大城市才成为主流。但是一旦作为规规范被确立，直到70年代它仍然是主要的电话技术。后按键式拨号在1963年被推出之后，强发明的最初的手指拨号系统作为“旋转的拨号系统”而知名。这是强怎样“让你的手指拨号”的。 埃姆斯椅LCW和DCW 1947 这些带有复合曲线座位，靠背和橡胶防震装置的成型胶合板椅是由查尔斯埃姆斯设计，在赫曼米勒家具公司生产的。 这个原始的概念是被查尔斯埃姆斯（1907—1978）和埃罗沙里宁（1910—1961）在1940年合作构想出来的。在1937年，埃姆斯成为克兰布鲁克学院实验设计部门的领头人，和沙里宁一起工作调查材料和家具。在这些努力下，埃姆斯发明了分成薄片和成型胶合板夹板，被称作埃姆斯夹板，在1941年收到了来自美国海军5000人的订单。查尔斯和他的妻子雷在他们威尼斯，钙的工作室及工厂和埃文斯产品公司的生产厂家一起生产了这批订单。 在1941年现代艺术博物馆，艾略特诺伊斯组织了一场比赛用以发现对现代生活富有想象力的设计师。奖项颁发给了埃姆斯和沙里宁他们的椅子和存储碎片，由包括埃德加考夫曼，大都会艺术博物馆的阿尔弗雷德，艾略特诺伊斯，马尔塞布鲁尔，弗兰克帕里什和建筑师爱德华达雷尔斯通的陪审团裁决。 这些椅子在1946年的现代艺术展览博物馆被展出，查尔斯埃姆斯设计的新的家具。当时，椅子只有三条腿，稳定性问题气馁了大规模生产。 早期的LCW（低木椅）和DWC（就餐木椅）设计有四条木腿在1946年第一次被埃文斯产品公司（埃姆斯的战时雇主）生产出来，被赫曼米勒家具公司分配。这些工具1946年被乔治纳尔逊为赫曼米勒购买，在1949年接手制造权。后来金属脚的愿景在1951年制作，包括LCW（低金属椅）和DWC（就餐金属椅）模型。配套的餐饮和咖啡桌也产生。这条线一直
附录一英文科技文献翻译 英文原文： Experimental investigation of laser surface textured parallel thrust bearings Performance enhancements by laser surface texturing (LST) of parallel-thrust bearings is experimentally investigated. Test results are compared with a theoretical model and good correlation is found over the relevant operating conditions. A compari- son of the performance of unidirectional and bi-directional partial-LST bearings with that of a baseline, untextured bearing is presented showing the bene?ts of LST in terms of increased clearance and reduced friction. KEY WORDS: ?uid ?lm bearings, slider bearings, surface texturing 1. Introduction The classical theory of hydrodynamic lubrication yields linear (Couette) velocity distribution with zero pressure gradients between smooth parallel surfaces under steady-state sliding. This results in an unstable hydrodynamic ?lm that would collapse under any external force acting normal to the surfaces. However, experience shows that stable lubricating ?lms can develop between parallel sliding surfaces, generally because of some mechanism that relaxes one or more of the assumptions of the classical theory. A stable ?uid ?lm with su?cient load-carrying capacity in parallel sliding surfaces can be obtained, for example, with macro or micro surface structure of di?erent types. These include waviness [1] and protruding microasperities [2–4]. A good literature review on the subject can be found in Ref. [5]. More recently, laser surface texturing (LST) [6–8], as well as inlet roughening by longitudinal or transverse grooves [9] were suggested to provide load capacity in parallel sliding. The inlet roughness concept of Tonder [9] is based on ??e?ective clearance‘‘ reduction in the sliding direction and in this respect it is identical to the par- tial-LST concept described in ref. [10] for generating hydrostatic e?ect in high-pressure mechanical seals. Very recently Wang et al. [11] demonstrated experimentally a doubling of the load-carrying capacity for the surface- texture design by reactive ion etching of SiC
外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
Interaction design Moggridge Bill Interaction design，Page 1-15 USA Art Press, 2008 Interaction design (IxD) is the study of devices with which a user can interact, in particular computer users. The practice typically centers on "embedding information technology into the ambient social complexities of the physical world."[1] It can also apply to other types of non-electronic products and services, and even organizations. Interaction design defines the behavior (the "interaction") of an artifact or system in response to its users. Malcolm McCullough has written, "As a consequence of pervasive computing, interaction design is poised to become one of the main liberal arts of the twenty-first century." Certain basic principles of cognitive psychology provide grounding for interaction design. These include mental models, mapping, interface metaphors, and affordances. Many of these are laid out in Donald Norman's influential book The Psychology of Everyday Things. As technologies are often overly complex for their intended target audience, interaction design aims to minimize the learning curve and to increase accuracy and efficiency of a task without diminishing usefulness. The objective is to reduce frustration and increase user productivity and satisfaction. Interaction design attempts to improve the usability and experience of the product, by first researching and understanding certain users' needs and then designing to meet and exceed them. (Figuring out who needs to use it, and how those people would like to use it.) Only by involving users who will use a product or system on a regular basis will designers be able to properly tailor and maximize usability. Involving real users, designers gain the ability to better understand user goals and experiences. (see also: User-centered design) There are also positive side effects which include enhanced system capability awareness and user ownership. It is important that the user be aware of system capabilities from an early stage so that expectations regarding functionality are both realistic and properly understood. Also, users who have been active participants in a product's development are more likely to feel a sense of ownership, thus increasing overall satisfa. Instructional design is a goal-oriented, user-centric approach to creating training and education software or written materials. Interaction design and instructional design both rely on cognitive psychology theories to focus on how users will interact with software. They both take an in-depth approach to analyzing the user's needs and goals. A needs analysis is often performed in both disciplines. Both, approach the design from the user's perspective. Both, involve gathering feedback from users, and making revisions until the product or service has been found to be effective. (Summative / formative evaluations) In many ways, instructional
本科毕业论文(设计) 外文翻译 学院：机电工程学院 专业：机械工程及自动化 姓名：高峰 指导教师：李延胜 2011年05 月10日 教育部办公厅 Failure Analysis，Dimensional Determination And
Analysis，Applications Of Cams INTRODUCTION It is absolutely essential that a design engineer know how and why parts fail so that reliable machines that require minimum maintenance can be designed．Sometimes a failure can be serious，such as when a tire blows out on an automobile traveling at high speed．On the other hand，a failure may be no more than a nuisance．An example is the loosening of the radiator hose in an automobile cooling system．The consequence of this latter failure is usually the loss of some radiator coolant，a condition that is readily detected and corrected．The type of load a part absorbs is just as significant as the magnitude．Generally speaking，dynamic loads with direction reversals cause greater difficulty than static loads，and therefore，fatigue strength must be considered．Another concern is whether the material is ductile or brittle．For example，brittle materials are considered to be unacceptable where fatigue is involved． Many people mistakingly interpret the word failure to mean the actual breakage of a part．However，a design engineer must consider a broader understanding of what appreciable deformation occurs．A ductile material，however will deform a large amount prior to rupture．Excessive deformation，without fracture，may cause a machine to fail because the deformed part interferes with a moving second part．Therefore，a part fails(even if it has not physically broken)whenever it no longer fulfills its required function．Sometimes failure may be due to abnormal friction or vibration between two mating parts．Failure also may be due to a phenomenon called creep，which is the plastic flow of a material under load at elevated temperatures．In addition，the actual shape of a part may be responsible for failure．For example，stress concentrations due to sudden changes in contour must be taken into account．Evaluation of stress considerations is especially important when there are dynamic loads with direction reversals and the material is not very ductile． In general，the design engineer must consider all possible modes of failure，which include the following． ——Stress ——Deformation ——Wear ——Corrosion ——Vibration ——Environmental damage ——Loosening of fastening devices
外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华
外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文
应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。
Injection Molding The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to harden when cooled .In most operations ,granular material (the plastic resin) is fed into one end of the cylinder (usually through a feeding device known as a hopper ),heated, and softened(plasticized or plasticized),forced out the other end of the cylinder, while it is still in the form of a melt, through a nozzle into a relatively cool mold held closed under pressure.Here,the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated. Thus, the significant elements of an injection molding machine become: 1) the way in which the melt is plasticized (softened) and forced into the mold (called the injection unit); 2) the system for opening the mold and closing it under pressure (called the clamping unit);3) the type of mold used;4) the machine controls. The part of an injection-molding machine, which converts a plastic material from a sold phase to homogeneous seni-liguid phase by raising its temperature .This unit maintains the material at a present temperature and force it through the injection unit nozzle into a mold .The plunger is a combination of the injection and plasticizing device in which a heating chamber is mounted between the plunger and mold. This chamber heats the plastic material by conduction .The plunger, on each stroke; pushes unbelted plastic material into the chamber, which in turn forces plastic melt at the front of the chamber out through the nozzle The part of an injection molding machine in which the mold is mounted, and which provides the motion and force to open and close the mold and to hold the mold close with force during injection .This unit can also provide other features necessary for the effective functioning of the molding operation .Moving
(文档含英文原文和中文翻译) 中英文翻译原文：
DESIGN and ENVIRONMENT Product design is the principal part and kernel of industrial design. Product design gives uses pleasure. A good design can bring hope and create new lifestyle to human. In spscificity,products are only outcomes of factory such as mechanical and electrical products,costume and so on.In generality,anything,whatever it is tangibile or intangible,that can be provided for a market,can be weighed with value by customers, and can satisfy a need or desire,can be entiled as products. Innovative design has come into human life. It makes product looking brand-new and brings new aesthetic feeling and attraction that are different from traditional products. Enterprose tend to renovate idea of product design because of change of consumer's lifestyle , emphasis on individuation and self-expression,market competition and requirement of individuation of product. Product design includes factors of society ,economy, techology and leterae humaniores. Tasks of product design includes styling, color, face processing and selection of material and optimization of human-machine interface. Design is a kind of thinking of lifestyle.Product and design conception can guide human lifestyle . In reverse , lifestyle also manipulates orientation and development of product from thinking layer.
沈阳工业大学工程学院 毕业设计（论文）外文翻译 毕业设计（论文）题目：工具盒盖注塑模具设计 外文题目：Friction , Lubrication of Bearing 译文题目：轴承的摩擦与润滑 系（部）：机械系 专业班级：机械设计制造及其自动化0801 学生姓名：王宝帅 指导教师：魏晓波 2010年10 月15 日
外文文献原文： Friction , Lubrication of Bearing In many of the problem thus far , the student has been asked to disregard or neglect friction . Actually , friction is present to some degree whenever two parts are in contact and move on each other. The term friction refers to the resistance of two or more parts to movement. Friction is harmful or valuable depending upon where it occurs. friction is necessary for fastening devices such as screws and rivets which depend upon friction to hold the fastener and the parts together. Belt drivers, brakes, and tires are additional applications where friction is necessary. The friction of moving parts in a machine is harmful because it reduces the mechanical advantage of the device. The heat produced by friction is lost energy because no work takes place. Also , greater power is required to overcome the increased friction. Heat is destructive in that it causes expansion. Expansion may cause a bearing or sliding surface to fit tighter. If a great enough pressure builds up because made from low temperature materials may melt. There are three types of friction which must be overcome in moving parts: (1)starting, (2)sliding, and(3)rolling. Starting friction is the friction between two solids that tend to resist movement. When two parts are at a state of rest, the surface irregularities of both parts tend to interlock and form a wedging action. To produce motion in these parts, the wedge-shaped peaks and valleys of the stationary surfaces must be made to slide out and over each other. The rougher the two surfaces, the greater is starting friction resulting from their movement . Since there is usually no fixed pattern between the peaks and valleys of two mating parts, the irregularities do not interlock once the parts are in motion but slide over each other. The friction of the two surfaces is known as sliding friction. As shown in figure ,starting friction is always greater than sliding friction . Rolling friction occurs when roller devces are subjected to tremendous stress which cause the parts to change shape or deform. Under these conditions, the material in front of a roller tends to pile up and forces the object to roll slightly uphill. This changing of shape , known as deformation, causes a movement of molecules. As a result ,heat is produced from the added energy required to keep the parts turning and overcome friction. The friction caused by the wedging action of surface irregularities can be overcome
毕业设计（论文） 外文翻译 题目西安市水源工程中的 水电站设计 专业水利水电工程 班级 学生 指导教师 2016年
研究钢弧形闸门的动态稳定性 牛志国 河海大学水利水电工程学院，中国南京，邮编210098 nzg_197901@https://www.doczj.com/doc/5e17866080.html,，niuzhiguo@https://www.doczj.com/doc/5e17866080.html, 李同春 河海大学水利水电工程学院，中国南京，邮编210098 ltchhu@https://www.doczj.com/doc/5e17866080.html, 摘要 由于钢弧形闸门的结构特征和弹力，调查对参数共振的弧形闸门的臂一直是研究领域的热点话题弧形弧形闸门的动力稳定性。在这个论文中，简化空间框架作为分析模型，根据弹性体薄壁结构的扰动方程和梁单元模型和薄壁结构的梁单元模型，动态不稳定区域的弧形闸门可以通过有限元的方法，应用有限元的方法计算动态不稳定性的主要区域的弧形弧形闸门工作。此外，结合物理和数值模型，对识别新方法的参数共振钢弧形闸门提出了调查，本文不仅是重要的改进弧形闸门的参数振动的计算方法，但也为进一步研究弧形弧形闸门结构的动态稳定性打下了坚实的基础。 简介 低举升力，没有门槽，好流型，和操作方便等优点，使钢弧形闸门已经广泛应用于水工建筑物。弧形闸门的结构特点是液压完全作用于弧形闸门，通过门叶和主大梁，所以弧形闸门臂是主要的组件确保弧形闸门安全操作。如果周期性轴向载荷作用于手臂，手臂的不稳定是在一定条件下可能发生。调查指出:在弧形闸门的20次事故中，除了极特殊的破坏情况下，弧形闸门的破坏的原因是弧形闸门臂的不稳定;此外，明显的动态作用下发生破坏。例如:张山闸，位于中国的江苏省，包括36个弧形闸门。当一个弧形闸门打开放水时，门被破坏了，而其他弧形闸门则关闭，受到静态静水压力仍然是一样的，很明显，一个动态的加载是造成的弧形闸门破坏一个主要因素。因此弧形闸门臂的动态不稳定是造成弧形闸门(特别是低水头的弧形闸门)破坏的主要原是毫无疑问。
(此文档为word格式，下载后您可任意编辑修改！) 冷冲模具使用寿命的影响及对策 冲压模具概述 冲压模具--在冷冲压加工中，将材料(金属或非金属)加工成零件(或半成品)的一种特殊工艺装备，称为冷冲压模具(俗称冷冲模)。冲压--是在室温下，利用安装在压力机上的模具对材料施加压力，使其产生分离或塑性变形，从而获得所需零件的一种压力加工方法。 冲压模具的形式很多，一般可按以下几个主要特征分类： 1?根据工艺性质分类 (1)冲裁模沿封闭或敞开的轮廓线使材料产生分离的模具。如落料模、冲孔模、切断模、切口模、切边模、剖切模等。 (2)弯曲模使板料毛坯或其他坯料沿着直线(弯曲线)产生弯曲变形，从而获得一定角度和形状的工件的模具。 (3)拉深模是把板料毛坯制成开口空心件，或使空心件进一步改变形状和尺寸的模具。 (4)成形模是将毛坯或半成品工件按图凸、凹模的形状直接复制成形，而材料本身仅产生局部塑性变形的模具。如胀形模、缩口模、扩口模、起伏成形模、翻边模、整形模等。2?根据工序组合程度分类 (1)单工序模在压力机的一次行程中，只完成一道冲压工序的模具。 (2)复合模只有一个工位，在压力机的一次行程中，在同一工位上同时完成两道或两道以上冲压工序的模具。 (3)级进模(也称连续模) 在毛坯的送进方向上，具有两个或更多的工位，在压力机的一次行程中，在不同的工位上逐次完成两道或两道以上冲压工序的模具。 冲冷冲模全称为冷冲压模具。 冷冲压模具是一种应用于模具行业冷冲压模具及其配件所需高性能结构陶瓷材料的制备方法，高性能陶瓷模具及其配件材料由氧化锆、氧化钇粉中加铝、错元素构成，制备工艺是将氧化锆溶液、氧化钇溶液、氧化错溶液、氧化铝溶液按一定比例混合配成母液，滴入碳酸氢铵，采用共沉淀方法合成模具及其配件陶瓷材料所需的原材料，反应生成的沉淀经滤水、干燥，煅烧得到高性能陶瓷模具及其配件材料超微粉，再经过成型、烧结、精加工，便得到高性能陶瓷模具及其配件材料。本发明的优点是本发明制成的冷冲压模具及其配件使用寿命长，在冲压过程中未出现模具及其配件与冲压件产生粘结现象，冲压件表面光滑、无毛刺，完全可以替代传统高速钢、钨钢材料。 冷冲模具主要零件冷冲模具是冲压加工的主要工艺装备，冲压制件就是靠上、下模具的相对运动来完成的。 加工时由于上、下模具之间不断地分合，如果操作工人的手指不断进入或停留在模具闭合区，便会对其人身安全带来严重威胁。 1