合同金额数字的表达
Expression of Amount in Contract
英文中金额的大写，由三个部分组成：“SAY + 货币”+ 大写数字（amount in words）+ ONL Y(相当于我们的“整”)。和汉语不同的是，数字中有零不用写出来，而是把数字读法写出来即可。
如：1 146 725.00 美元
SAY US DOLLARS ONE MILLION ONE HUNDRED AND FORTY SIX THOUSAND SEVEN HUNDRED AND TWENTY FIVE ONL Y
HKD12 176
SAY HONG KONG DOLLARS TWELVE THOUSAND ONE HUNDRED AND SEVENTY SIX ONL Y.
18,800,000美金Eighteen million eight hundred thousand U.S. Dollars
如果金额有小数，常见的有三种表达方法：
1. ...AND CENTS…(cents in words) ONL Y, 如：USD 100.25 可以写成
SAY US DOLLARS ONE HUNDRED AND CENTS TWENTY FIVE ONL Y
2. …AND POINT…(cents in words) ONL Y. 如：JPY1 100.55 可以写成
JAPANESE YUAN ONE THOUSAND ONE HUNDRED AND POINT FIFTY FIVE ONL Y
3 EUD 13 658.85可以写成
EURO DOLLARS THIRTEEN THOUSAND SIX HUNDRED AND FIFTY EIGHT 85/100 ONL Y
英文金额表达式中，小数点前每三位必须有一个逗号，靠近小数点的第一个逗号是Thousand （千), 以此类推，第二个逗号是Million （百万），第三个逗号是Billion（十亿）；而且英文中小数点后面的数字都是按单个数字来读，不连在一起读。
SAY US DOLLARS (...........) ONL Y.
例如：USD1,234,567.89
SAY US DOLLARS ONE MILLION AND TWO HUNDRED THIRTY-FOUR THOUSAND AND FIVE HUNDRED SIXTY-SEVEN
a million two hundred thirty-four thousand and five hundred and sixty-seven point eight nine dollars
million:百万thousand:千point:点“a million”是“100万”，由于英文是没有“十万、万”这两个单位的，所以说“、十万、万”的时候用英文是用“千”作为单位，也就是“100个千、10个千”，所以上面就是“two hundred thirty-four thousand （234个千）”。
Amount:$1,234,567.89(Say U .S .Dollars One Million Two Hundred Thirty-four Thousand
And Five Hundred And Sixty-seven Point Eight only)
USD240,000.00 SAY US DOLLARS TWO HUNDRED AND FORTY THOUSAND ONL Y. USD2755.00 SAY US DOLLARS TWO THOUSAND SEVEN HUNDRED AND
FIFTY-FIVE ONL Y
EUR4768.36 SAY EUROPEAN DOLLARS FOUR THOUSAND SEVEN HUNDRED
AND SIXTY-EIGHT AND CENTS THIRTY-SIX ONL Y
EUR5194.00 SAY EUROPEAN DOLLARS FIVE THOUSAND ONE HUNDRED
AND NINETY-FOUR ONL Y
USD12150 Say US DOLLARS Twelve thousand one hundred and fifty dollars only
USD14257.1 Say US DOLLARS Fourteen thousand two hundred and fifty-seven
and cent one only
USD13711.5 Say US DOLLARS Thirteen thousand seven hundred and eleven
and cent five only
USD12150 SAY US DOLLARS TWELVE THOUSAND ONE HUNDRED
AND FIFTY DOLLARS ONL Y
USD14257.1 SAY US DOLLARS FOURTEEN THOUSAND TWO HUNDRED
AND FIFTY-SEVEN AND CENT ONE ONL Y
USD13711.5 SAY THIRTEEN THOUSAND SEVEN HUNDRED AND ELEVEN
AND CENT FIVE ONL Y
为避免金额数量的差漏、伪造或涂改，英文合同对于金额有十分严格的规范。一是在小写(阿拉伯数字)的后面用括号内的大写(文字数字)重写, 即使原文合同中没有大写，英译时也有必要加上大写；二是货币单位准确无误；三是大写要求顶格，前加动词SAY（即为），单词之间疏密均匀，在大写文字前加上“SAY”，意为“大写”；在最后加上“ONL Y”。意思为“整”。必须注意：小写与大写的金额数量要一致。
例：甲方方须每月付给乙方美元500 元整。
Party A shall pay Party B a monthly salary of USD $ 500 (SAY FIVE HUNDRED US DOLLARS ONL Y).
一般是中文的大写在前面，后面用括号加小写阿拉伯数字；但翻译成英文时正好相反：小写在前面，后面是大写。
例：人民币叁仟元整（3,000元整）的英文表达为RMB3,000 (RMB THREE THOUSAND ONL Y IN WORD)
这里，中文的“整”可以用only in word 或者仅用only 表达。RMB可以用人民币符号￥代替。英文US Dollar 可以用US $代替，也可以简单用USD表达，但要注意符号“$”既可代表“美元”，又可代表其他某些地区的货币，如港币HK$；大写前面的SAY（即）往往被省略。美元U.S DOLLAR用单复数均可。
例：美元叁仟元整（美元3,000元整）的英文表达为US Dollar 3,000 (SAY USD THREE THOUSAND ONL Y IN WORD)
例：AMOUNT: $1,234,567.89（U.S DOLLARS ONE MILLION TWO HUNDRED
THIRTY-FOUR THOUSAND AND FIVE HUNDRED AND SIXTY-SEVEN POINT EIGHT ONL Y）
当金额用数字书写时，金额数字必须紧靠货币符号，例如：Can $891,568，不能写成：Can $ 891,568。另外，翻译的还要特别注意金额中是小数点（.）还是分节号（,），因为这两个符号极易引起笔误。
and用于百位与个十位之间，以及整数与分数之间：
$68,601.50 = Say US Dollar Sixty Eight Thousand Six Hundred and One and Fifty Cent Only. $78,675.05= Say US Dollar Seventy Eight Thousand Six Hundred and Seventy Five and Five Cent Only.
1. 今年上半年共采购货值RMB 2,662,239.23
The overall purchasing amount of the first half of this year is: Two million, six hundred and
sixty-two thousand, two hundred and thirty-nine, point two three (yuan)
2. 昨天共采购货值RMB 61,971.41
The purchasing amount of yesterday is: Sixty-one thousand, nine hundred and seventy-one, point four one (yuan)
租赁合同 LEASE CONTRACT 出租方(甲方)： Land Lord (Party A)： 承租方（乙方）： Tenant (Party B)： 中介方(丙方)： Intermediary(Party C)： 根据国家有关法律、法规和本市有关规定，甲、乙双方在平等自愿的基础上，经友好协商，就甲方将其合法拥有的房屋出租给乙方使用，乙方承租使用甲方房屋事宜，订立本合同。Party A and B have reached an agreement through friendly consultation to conclude the following contract. 1、房屋地址Location of the premises 甲方将其所有的位于的房屋及其附属设施在良好状态下出租给乙方作_______使用。 Party A will lease to Party B the premises and attached facilities owned by itself, which is located at__________________________________________on for _________ 2、房屋面积Size of the premises 出租房屋的登记面积为平方米（建筑面积）。 The registered size of the leased premises is_____quare meters (Gross size). 3、租赁期限Lease term 租赁期限自_____年____月____日起至______年____月____日止，甲方应于______年_____月_____日前将房屋交付乙方使用 The lease term will be from (month) (day) (year) to_______(month)_______(day) ______(year). Party A will provide it to Party B for use before______(month)_____(day)_____(year) 4、租金Rental 1)、金额：双方商定月租金为，付费方式为，提前____天支付下一期租金。 Amount：the rental will be RMB per month. Payment of rental will be one installment every_______month(s), Each successive installment will be paid______days before the starting date of successive period. 5、押金Deposit 1)、为确保房屋及其附属设施之安全与完好，及租赁期内相关费用之如期结算，乙方同意于______年_____月日前支付给甲方押金元整，甲方在收到押金后予以书面签收。
国际贸易合同中英文对照版 英文进口合同范本- - -------------------------------------------------------------------------------- Purchase Contract 合同编号(Contract No.): _______________ 签订日期(Date) :,,,,,,,,,,_ 签订地点(Signed at) :,,,,,,,____ 买方:,,,,,,,,,,,,,,,,,,,,,,,,,, The Buyer:,,,,,,,,,,,,,,,,,,,,,,,, 地址: ,,,,,,,,,,,,,,,,,,,,,,,,,, Address: ,,,,,,,,,,,,,,,,,,,,,,,,, 电话(Tel):___,,,,,,,, 传真(Fax):,,,,,,,,,, 电子邮箱(E-mail):,,,,,,,,,,,,,,,,,,,,,, 卖方:,,,,,,,,,,,,,,,,,,,,,,,,,,, The Seller:,,,,,,,,,,,,,,,,,,,,,,,,, 地址:,,,,,,,,,,,,,,,,,,,,,,,,,,, Address: ,,,,,,,,,,,,,,,,,,,,,,,,_, 电话(Tel):_,,,,,,,, 传真(Fax):,,,,,,,,,,, 电子邮箱(E-mail):,,,,,,,,,,,,,,,,,,,,,, 买卖双方同意按照下列条款签订本合同: The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below:
PURCHASE ORDER 采购合同 合同编号( Contract No.)：日期(Date)： 卖方(Seller)： 地址(Address): 电话(Tel)：传真(Fax)：电子邮箱(E-mail)： 买方(Buyer)： 地址(Address): 电话(Tel)：传真(Fax)： 邮箱(E-mail)： The undersigned seller and buyer have agreed to close the following transactions according to the terms and conditions set forth as below: 买卖双方经协商同意按下列条款成交： https://www.doczj.com/doc/2119007074.html,modity, Quantity and Price: 1.1. The contract price will be calculated based on the actual shipping quantity. 结算总金额以实际发货数量计算。 1.2. The packing list should indicate the weight of a balk and the quantity of bales. 装箱单应表明规格，每包重量，数量和装箱的总重量。 1.3 As seller's parking list indicated. 以卖方的装箱单为准. 2. Shipment 装运: 2.1 The seller is responsible to load products into the container. 卖方负责装入集装箱内。 2.2 Package: opp bag
合同编号：YT-FS-6596-70 贸易出口合同中英文版一 Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity
贸易出口合同中英文版一 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 合同编号：_____ Contract No：_____ 签订日期：_____ Date：____签订地点：_____ Signed at ： _____电话：____ Tel： ____传真：____ Fax：_____电报：____ Cable： ____电传：____ Telex： ____电话：____ Tel： ____传真：____ Fax：_____电报：_____ Cable：____电传：_____ Telex： ____经买双方确认根据下列条款订立本合同：The undersigned Sellers and Buyers have confirmed this contract in accordance with the terms and conditions stipulated below ： 1. 货号Art No. 名称及规格Descriptions 单位Unit 数量Quantity 单价Unit Price 金额Amount 合计：_____ Totally：____总值(大写)：_____ Total value：(in words)
商品买卖合同 合同编号(Contract ):NO Goods Sales Contract 买 方(Buyer): 营业执照号码(身份证号) Business License No.（ID No.）: 卖 方(Seller)： 营业执照号码Business License No.： 签订时间Signing date ： 签订地点Signing place ： 经双方协商同意，按照<<中华人民共和国合同法>>，签订本合同，并严格遵守履行。 一、标的、金额 the subject and amount 买方向卖方购买如下商品： 货 号 Item No 商 品 名 称 Description 型 号（规格）Mode l No.(specification)） 数 量 Quantity 单 位 Unit 单 价 Unit price 金 额A mount 备 注Rem arks 合计人民币金额(大 写): 佰 拾 万 仟 佰 拾 元整 (空格不够，可附页。凭样定货的，双方可另附约定。) 二、交提(货)日期 Goods delivery date or delivery time 交提(货)时间： 年 月 日，卖方经买方同意，可提前供货。 三、交提(货)地点 Goods delivery place : 。 四、交提(货)方式 Means of goods delivery :第 种 1.卖方送货 2.卖方代运3.买方自提4.其他 。买方收货时，由收货员签字，在送货单上加盖公章或收货专用章。 五、 商品质量（标准）The commodity quality (standard):第 种1.国家标准2.行业标准3.企业标准4、样品标准5、双方另行约定 。凭样交货的商品，应与双方确认的样品及其说明的质量相同，样品应当由双方签章封样保存。如对商品有特殊要求的，可另行约定。合格率低于 ℅为该批商品不合格，买方有权拒收。 六、商品验收Goods inspection and acceptance 验收时间：第 种1.当场验收2. 交货日前 天内验收3.交货后 天内验收。验收方法：第 种1.逐件2.抽样3.其他
国际贸易合同（中英文）国际贸易货物买卖(中英文) CONTRACT OF GOODS PURCHASE Contract No.: 合同号： Date: 日期： The Buyer: 买方：
Address: 地址：Fax: 传真：Tel: 电话： The Seller: 卖方：Address: 地址：Fax: 传真：Tel: 电话：
1. COMMODITY AND PRICE 商品和价格 This Contract is made by and between the Buyer and the Seller; whereby the Buyer agrees to buy and the Seller agrees to sell the commodity and on terms and conditions stipulated below: 本合同由买卖双方订立，根据下列条款和条件买方同意购买且卖方同意出售下列商品： Item No. 序号 Commodity and specifications 商品和规格 Quantity数量
Unit Price + Price Term单价和价格术语 Total Amount in U.S.Dollar总价(美元) TOTAL value: USD (SAY U.S. DOLLAR ONLY)总金额：美元(大写美元整) 2. COUNTRY OF ORIGIN AND MANUFACTURERS: THE NETHERLANDS/ PHILIPS 原产国和制造商: 3. TIME OF SHIPMENT: 装运时间: The Seller agrees to exercise customary reasonable business practices to meet the Buyer s requested delivery dates set forth herein. The Buyer understands that shipping dates may depend upon site readiness and the Seller s prompt
英文合同:货物进口合同(中英文) 这篇《英文合同范文:货物进口合同(中英文)》是为大家整理的，希望对大家有所帮助。以下信息仅供参考！！！ 签约日期：买方：卖方： 本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品： 【章名】第一部分 １．商品名称及规格 ２．生产国别及制造厂商 ３．单价 ４．数量 ５．总值 ６．包装 ７．保险 ８．装船时间 ９．装运口岸 １０．目的口岸 １１．装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及／或
有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。 １２．付款条件：买方于货物装船时间前一个月通过＿＿＿＿＿＿银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第１８条ａ款所列单据在开证银行议付贷款。上述信用证有效期将在装船后１５天截止。 １３．其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。 【章名】第二部分 【章名】１４．ｆｏｂ／ｆａｓ条件 １４．１．本合同项下货物的装运舱位由买方或买方的运输代理人＿＿＿＿＿＿＿＿＿＿＿租订。 １４．２．在ｆｏｂ条件下，卖方应负责将所订货物在本合同第８条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。 １４．３．在ｆａｓ条件下，卖方应负责将所订货物在本合同第８条所规定的装船期内按买方所通知的任何日期
中国对外贸易货物出口合同 CHINA FOREIGN TRADE SALES CONTRACT 合同编号Contract No: _________________ 签订日期 Date: _____________________ 签订地点Signed at: __________________ 买方：______________ _电话Tel: _________________________ THE BUYER：S 传真Fax: ___________________ 地址：______________ _电报Cable: ________________ ADDRES：S 电传Telex ： _____________ 卖方：______________ _电话Tel: _________________________ THE SELLER：S 传真Fax: ___________________ 地址：______________ _电报Cable: ________________ ADDRES：S 电传Telex ： _____________ 经买卖双方确认根据下列条款订立本合同： The undersigned Sellers and Buyers have confirmed this contract in accordance with the terms and conditions stipulated below: 1. 货号名称及规格单位数量单价金额 Art No Descriptions Unit Quantity Unit price Amount 合计： Totally: 总值 (大写 )： Total amount:(in words) 允许溢短______ %。 _______ %more or less in quantity and value allowed. 2. 成交价格术语：口 FOB□ CFR□ CIF □ DDU D Terms:
采购合同 (Purchasing Contract) 合同编号(Contract NO.)： 合同签订地点(Signed At)：东营 签订时间(Date)：年月日出卖人(Seller)： 买受人(Buyer)： 鉴于：根据【中华人民共和国合同法】及相关法律法规，本着平等自愿、等价有偿、诚实诚信的原则，经双方协商一致，订立本合同。 According to the Contract law of the People's Republic of China and relevant laws and regulations,we conclude the contract on the basis of equality, voluntariness,compensation of equal value and sincerity. 第一条标的、数量、价款及交（提）货时间 Item 1 (object)Quantity Price and Delivery time 物资编码名称及规格型号Commodity code and type 生产厂家 Manufacture r 计量单位 Unit 数量 Quantity 单价（元） Unit Price 总金额（元） Total Amount 备注 Note 不含税总金额（人民币） Total Amount (V AT excluded) 交提货时间、数量：年月日至年月日全部交货。 Delivery time: From to 第二条质量标准：标准代号、编号和标准名称：GB150-98. Item 2 Quality standard: standard code,serial number and standard name:GB150-98. 第三条出卖人对质量负责的条件及期限 Item 3 Conditions and time limits that Sellers shall be held responsibility for 1. 质量负责条件和期限按正常运行12个月止执行。 1. Quality responsible conditions and time limits shall not be valid until the product has been functioning properly for 12 months 2. 出卖人对标的物的质量负责，产品均附质检报告单，质量保证书。如果出卖人知道或 者应当知道所处卖产品存在质量缺陷，所承担的质量保证期限不受前款质量负责期限的约束，应依法承担相应责任。 2. Sellers shall be responsible for the quality of the marks.The products should include the Quality Inspection Report and Quality Guarantee.If the sellers know or should know the products they sell with defects in quality,the quality assurance time limits should not be subject to the previous quality responsibility deadline and they should be held due responsibility for it. 第四条包装标准：标准包装，产品所需包装由出卖人合理包装，适合水运和长途内陆运输，防潮，防湿，防锈，防震。 Item 4 Packaging standard: Standard packaging, the sellers should package the products properly, it should be suitable for shipment and long distance inland transportation. The packaging of the products should be resistant of dampness, moisture, rust and shock. 第五条随机的必备品、配件、技术资料、工具数量及供应方法：随设备交货一起交齐。 Item 5 The accompanied necessary materia l, accessories, technical information ,quantity of
NO.: DATE: FAX: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing. 包装：标准空运包装。如果由于不适当的包装 而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。 4. SHIPPING MARK: The Sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "KEEP AWAY FROM MOISTURE" "HANDLE WITH CARE" "THIS SIDE UP" etc. and the shipping mark: 唛头：卖方应用不褪色的颜料在每个箱子外部刷上箱号、 毛重、净重、尺寸，并注明“防潮” “小心轻放” 、“此面向上”等，唛头为 : 5. TIME OF SHIPMENT （装运期）：within days after receipt of L/C 6. P ORT OF SHIP MEN （装运港）： 7. PORT OF DESTINATIO N （目 的港）：CONTRACT THE BUYERS: ADDRESS : TEL: THE SELLERS: ADDRESS: TEL: , CHINA
YF-ED-J7602 可按资料类型定义编号 对外贸易合同中英文对照 实用版 An Agreement Between Civil Subjects To Establish, Change And Terminate Civil Legal Relations. Please Sign After Consensus, So As To Solve And Prevent Disputes And Realize Common Interests. （示范文稿） 二零XX年XX月XX日
对外贸易合同中英文对照实用版 提示：该合同文档适合使用于民事主体之间建立、变更和终止民事法律关系的协议。请经过一致协商再签订，从而达到解决和预防纠纷实现共同利益的效果。下载后可以对文件进行定制修改，请根据实际需要调整使用。 合同编号：__________ 签订日期：__________ 签订地点：__________ 电话：_____________ 传真：_____________ 电报：_____________ 电传：_____________ 电话：_____________ 传真：_____________ 电报：______________ 电传：______________
经买双方确认根据下列条款订立本合同： 1.货号 artno.名称及规格 descriptions单位 unit数量 quantity单价 unitprice金额 合计：_______________ 总值(大写)_______ 允许溢短___% 2.成交价格术语：□fob□cfr□cif□ddu □ 3.包装：______________ 4.装运码头：__________ 5.运输起讫：由______经______到
三方合同-中英文版
三方合同 Triangular Contract 本合同议于______年____月____日在______（地点）由有关三方在平等互利基础上达成，按三方同意的下列条件发展业务关系：This contract is made and entered into by and between the three parties concerned on ___________ (Date) in ________ (Place) on the basis of equality and mutual benefit to develop business on terms and conditions mutually agreed upon as follows: 1.合同三方 1.The Parties Concerned 甲方： Party A: 地址: Add: 2 电话： Tel.: 传真： Fax.: 乙方： Party B: 地址: Add: 电话： Tel.: 传真： Fax.: 丙方： Party C: 地址: Add:
电话： Tel.: 传真： Fax.: 2.委任 2.Appointment 甲方为乙方在某地建立XX产线提供相关的技术支持、文件支持。乙方承诺从甲方处以散件形式采购xx，甲方将XX以散件形式发给丙方，丙方收到后在某地按甲方或乙方的技术要求组装成SKD形式产品发至乙方。 Party A provides relevant technical support, documentation support for Party B to set up a CKD XX product production line in place name. Party B should purchase XX product from Party A in CKD format. Party A should send the XX product to Party C in CKD format. Party C should assemble it accord to Parties A & B’s technical requirements and send it in SKD format to Party B. 3.商品：XX https://www.doczj.com/doc/2119007074.html,modity: 4.数量：每年至少4万台 4.Minimum Quantity per year : 40,000pcs /year 5.价格条款 5.Price conditions 考虑到竞争对手的价格，甲方必须保证给乙方最有竞争力价格。每个产品的价格应由甲乙双方协商确定，甲方和乙方必须就每个季度的采购计划达成一致，以避免价格波动。每当原材料成本总变动变动+/- 3％时，所有产品的价格应每季度协商一次。 Part A must guarantee the best price to the part B, considering the Competitors’ prices.
附1 国际货物买卖合同 Sales Contract 编号(No.):______________ 签约地(Signed at):________________ 日期(Date):__________________ 卖方(Seller):________________ 地址(Adress):_______________ 电话(Tel) :________________ 传真(Fax):______________ 电子邮箱(E-mail):_____________ 买方(Buyer0:_______________ 地址(Adress):_________________ 电话(Tel) :________________ 传真(Fax):______________ 电子邮箱(E-mail):_____________ 买卖双方经协商同意按下列条款成交：(The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below:) 1、货物名称、规格和质量(Name, Specifications and Quality of Commodity)： 2、数量(Quantity)： 3、单价及价格条款(Unit Price and Terms of Delivery)：除非另有规定，贸易术语均应依照国际商会制定的《2000年国际术语解释通则》办理。(The trade terms shall be subject to International Rules for the International of Trade Terms 2000 provided by International Chamber of Commerce unless otherwise stipulated herein.) 4、总价(Total Amount)： 5、允许溢短装(More or Less)：______% 6、装运期限(Time of Shipment)：收到可以转船及分批装运之信用证_______天内装运。(Within______days after receipt of L/C allowing transhipment and partial shipments ) 7、付款条件(Terms of Payment)： 买方须于______前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后______天在中国到期，并必须注明允许分批装运和转船。
编号：YB-HT-011138 出口商品买卖合同(中英 Contract for the sale of export 甲方： 乙方： 签订日期：年月日 文档中文字均可自行修改 编订：YunBo Network
出口商品买卖合同(中英文对照) 出口商品买卖合同(中英文对照) 编号No._____________ 中国CHINA C.I.F./C.＆F. 合同格式 C.I.F./C.＆F.From 买受人：______________出卖人：________________ Buyer：______________Seller：________________ 地址：______________地址：________________ Adress：______________Adress：________________ 电挂：______________电挂：________________ Cable：______________Cable：________________
电传：______________电传：________________ Telex：______________Telex：________________ 上述买卖双方按照下列条件于____年____月____日签订合同。 TheSellerandtheBuyerabovenamedhavethis____dayof________ _________enteredintothisContractonthefollowingtermsandc onditions. 1.货物 COMMODITY： 序号 ItemNo. 单位 Description 单价 Unit
NO: 劳动合同 LABOR CONTRACT
甲方： Party A : 公司地址：上海市闸北区江场三路138号 Registered Address: NO.138,Jiang Chang San Road,Zhabei District,Shanghai,China 乙方： Party B: 身份证号码： ID Number: 家庭地址： Home Address: 根据《中华人民共和国劳动合同法》及有关法律和法规的规定，甲乙双方在平等自愿、协商一致的基础上签订本合同。 According to the Labor Contract Law of PRC and relevant laws and regulations, Party A and Party B sign this contract on the basis of equality, free and mutual consultation. 一、工作内容 1、Working Contents 1.1 甲方因生产需要，同意聘用乙方为本公司员工，职位为。乙方同意接受该安排，遵守劳动纪律和职业道德，执行劳动安全规程，提高职业技能，完成生产（工作）任务。 To meet the production demand, Party A agrees to employ Party B as . Party B agrees to accept the arrangement, observe the labor discipline and professional ethics, carry out rules of safe operation, improve professional skills and accomplishes production tasks. 1.2甲方可根据生产经营需要依法调整乙方的工作岗位或职位。 Party A may legitimately adjust Party B’s post according to business requirements. 二、合同期限 2、Term of Contract 本合同自年月日至年月日，其中试用期为个月（自年月日至年月日）。劳动合同的期限届满或约定的终止条件出现，劳动合同即终止执行。经双方协商一致的，可以解除或续订劳动合同。 This contract will be effect from (date, month, year) to (date, month, year), during which the probation period is months (from (date, month, year) to (date, month, year)). The contract will be terminated when the contract is at its expiry or agreed termination conditions are occured. Both parties may rescind or renew the contract via mutual consultation. 三、工作时间 3、 Working Hours 3.1 甲方实行每周工作40小时和2天休息日的标准工时制度。 Party A carries out standard working hour system of 40 hours per week and two rest days (maybe they are not Saturday, Sunday).
购货合同 PURCHASE CONTRACT 合同编号： Con tract No.: 签订日期： Date : 签订地点： Signed at: 买方: The Buyers: 地址： Address: 联系人： Con tact: 电话(Tel): 传真(Fax): 邮箱/E-mail: 卖方： The Sellers: 地址： Address: 联系人： Con tact: 电话(Tel): 传真(Fax): 邮箱/E-mail: 经买卖双方确认根据下列条款订立本合同： The un dersig ned Sellers and Buyers have con firmed this con tract in accorda nee with the terms and conditions stipulated below: 1.商品名称及规格 Name of Commodity & Specification 2.数量 Quan tity 3.单价 Unit Price 4?总金额 Amount 5.包装
Pack ing 6.交货时间 Delivery Time 7.交货地点 Delivery Place 8.运输方式 Means of Transport 9.保险 In sura nee 由 ______ 方按发票金额的_______ %投保____________ ，加保_______ 从______ 到_______ 。 To be covered by ________________ for __________ % of the invoice value covering additional from to ________ . 10?付款条件 Terms of Payment 卖方收到50%定金后开始生产，发货前买方付清余款。 After the receipt of 50% of the total value payme nt, the seller shall beg in the product ion and the buyer pay the balanee of the total value before delivery. 11.装运通知 Shipping Advice 一旦装运完毕，卖方应立即电告买方合同号、品名、已装载数量、发票总金额、毛重、运输工具名称及启运日期等。 The sellers shall immediately, upon the completion of the loading of the goods advise the buyers of the Con tract No. n ames of commodity, loaded qua ntity, inv oice value, gross weight, names of vessel and shipment date by TLX/FAX. 12.交货原则 Delivery Policy 卖方在规定时间内所送货物必须符合订单要求，送错或送少，应及时更换或补货，否则，所带来的损失由卖方全部承担。 The sellers with in the prescribed time delivery of goods must comply with the order request, sent to the wrong or the less, should be replaced or replenishment, otherwise, the losses borne entirely by the sellers. 13.推迟交货和罚款 Late Delivery and Penalty 如卖方没有按照合同规定准时交货，买方同意卖方付给罚款。加入卖方交货期超过7天，买方有权取消合同。取消合同的情况，卖方仍不能延误付给买方上述罚款。 Should the Sellers fail to make delivery on time as stipulated in the Con tract, the Buyers shall agree to postp
Both parties jointly acknowledge and abide by their responsibilities and obligations and reach an agreed result. 甲方：___________________ 乙方：___________________ 时间：___________________ 出口贸易合同中英双语2篇
编号：FS-DY-20268 出口贸易合同中英双语2篇 出口贸易合同范本篇一： 进出口国际贸易合同 Purchase Contract 合同编号(Contract No.): _____ 签订日期(Date) :_____ 签订地点(Signed at) :_____ 买方：____ The Buyer:____ 地址：____ Address: _____ 电话(Tel):_____ 传真(Fax):____ 电子邮箱(E-mail):____ 卖方：_____ The Seller:_____
地址：_____ Address: ____ 电话(Tel):_____ 传真(Fax):_____ 电子邮箱(E-mail):____ 买卖双方同意按照下列条款签订本合同： The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below: 1. 货物名称、规格和质量(Name, Specifications and Quality of Commodity)： 2. 数量(Quantity)： 允许____的溢短装(___% more or less allowed) 3. 单价(Unit Price)： 4. 总值(Total Amount)： 5. 交货条件(Terms of Delivery) FOB/CFR/CIF_____ 6. 原产地国与制造商(Country of Origin and Manufacturers): 7. 包装及标准(Packing)： 货物应具有防潮、防锈蚀、防震并适合于远洋运输的包